linux-next/arch/mips/generic/Makefile

# SPDX-License-Identifier: GPL-2.0-or-later
#
# Copyright (C) 2016 Imagination Technologies
# Author: Paul Burton <paul.burton@mips.com>
#

obj-y += init.o
obj-y += irq.o
obj-y += proc.o

obj-$(CONFIG_YAMON_DT_SHIM)		+= yamon-dt.o
obj-$(CONFIG_LEGACY_BOARD_SEAD3)	+= board-sead3.o
obj-$(CONFIG_LEGACY_BOARD_OCELOT)	+= board-ocelot.o
obj-$(CONFIG_MACH_INGENIC)			+= board-ingenic.o
obj-$(CONFIG_VIRT_BOARD_RANCHU)		+= board-ranchu.o
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152 Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 3029 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 2019-05-27 08:55:01 +02:00			`# SPDX-License-Identifier: GPL-2.0-or-later`
MIPS: generic: Introduce generic DT-based board support Introduce a "generic" platform, which aims to be board-agnostic by making use of device trees passed by the boot protocol defined in the MIPS UHI (Universal Hosting Interface) specification. Provision is made for supporting boards which use a legacy boot protocol that can't be changed, but adding support for such boards or any others is left to followon patches. Right now the built kernels expect to be loaded to 0x80100000, ie. in kseg0. This is fine for the vast majority of MIPS platforms, but nevertheless it would be good to remove this limitation in the future by mapping the kernel via the TLB such that it can be loaded anywhere & map itself appropriately. Configuration is handled by dynamically generating configs using scripts/kconfig/merge_config.sh, somewhat similar to the way powerpc makes use of it. This allows for variations upon the configuration, eg. differing architecture revisions or subsets of driver support for differing boards, to be handled without having a large number of defconfig files. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14353/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 2016-10-05 18:18:20 +01:00			`#`
			`# Copyright (C) 2016 Imagination Technologies`
Update MIPS email addresses MIPS will soon not be a part of Imagination Technologies, and as such many @imgtec.com email addresses will no longer be valid. This patch updates the addresses for those who: - Have 10 or more patches in mainline authored using an @imgtec.com email address, or any patches dated within the past year. - Are still with Imagination but leaving as part of the MIPS business unit, as determined from an internal email address list. - Haven't already updated their email address (ie. JamesH) or expressed a desire to be excluded (ie. Maciej). - Acked v2 or earlier of this patch, which leaves Deng-Cheng, Matt & myself. New addresses are of the form firstname.lastname@mips.com, and all verified against an internal email address list. An entry is added to .mailmap for each person such that get_maintainer.pl will report the new addresses rather than @imgtec.com addresses which will soon be dead. Instances of the affected addresses throughout the tree are then mechanically replaced with the new @mips.com address. Signed-off-by: Paul Burton <paul.burton@mips.com> Cc: Deng-Cheng Zhu <dengcheng.zhu@imgtec.com> Cc: Deng-Cheng Zhu <dengcheng.zhu@mips.com> Acked-by: Dengcheng Zhu <dengcheng.zhu@mips.com> Cc: Matt Redfearn <matt.redfearn@imgtec.com> Cc: Matt Redfearn <matt.redfearn@mips.com> Acked-by: Matt Redfearn <matt.redfearn@mips.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: trivial@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 2017-10-25 17:04:33 -07:00			`# Author: Paul Burton <paul.burton@mips.com>`
MIPS: generic: Introduce generic DT-based board support Introduce a "generic" platform, which aims to be board-agnostic by making use of device trees passed by the boot protocol defined in the MIPS UHI (Universal Hosting Interface) specification. Provision is made for supporting boards which use a legacy boot protocol that can't be changed, but adding support for such boards or any others is left to followon patches. Right now the built kernels expect to be loaded to 0x80100000, ie. in kseg0. This is fine for the vast majority of MIPS platforms, but nevertheless it would be good to remove this limitation in the future by mapping the kernel via the TLB such that it can be loaded anywhere & map itself appropriately. Configuration is handled by dynamically generating configs using scripts/kconfig/merge_config.sh, somewhat similar to the way powerpc makes use of it. This allows for variations upon the configuration, eg. differing architecture revisions or subsets of driver support for differing boards, to be handled without having a large number of defconfig files. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14353/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 2016-10-05 18:18:20 +01:00			`#`

			`obj-y += init.o`
			`obj-y += irq.o`
			`obj-y += proc.o`
MIPS: generic: Convert SEAD-3 to a generic board Convert the MIPS SEAD-3 board support to be a generic board, supported by generic kernels. Because the SEAD-3 boot protocol was defined long ago and we don't want to force a switch to the UHI protocol, SEAD-3 is added as a legacy board which is detected by reading the REVISION register. This may technically not be a valid memory read & future work will include attempting to handle that gracefully. In practice since SEAD-3 is the only legacy board supported by the generic kernel so far the read will only happen on SEAD-3 boards, and even once Malta is converted the same REVISION register exists there too. Other boards such as Boston, Ci20 & Ci40 will use the UHI boot protocol & thus not run any of the legacy board detect functions. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14354/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 2016-10-05 18:18:21 +01:00
MIPS: generic/yamon-dt: Pull YAMON DT shim code out of SEAD-3 board In preparation for supporting other YAMON-using boards (Malta) & sharing code to translate information from YAMON into device tree properties, pull the code doing so for the kernel command line, system memory & serial configuration out of the SEAD-3 board code. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/16181/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 2017-06-02 12:29:51 -07:00			`obj-$(CONFIG_YAMON_DT_SHIM) += yamon-dt.o`
MIPS: generic: Convert SEAD-3 to a generic board Convert the MIPS SEAD-3 board support to be a generic board, supported by generic kernels. Because the SEAD-3 boot protocol was defined long ago and we don't want to force a switch to the UHI protocol, SEAD-3 is added as a legacy board which is detected by reading the REVISION register. This may technically not be a valid memory read & future work will include attempting to handle that gracefully. In practice since SEAD-3 is the only legacy board supported by the generic kernel so far the read will only happen on SEAD-3 boards, and even once Malta is converted the same REVISION register exists there too. Other boards such as Boston, Ci20 & Ci40 will use the UHI boot protocol & thus not run any of the legacy board detect functions. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14354/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 2016-10-05 18:18:21 +01:00			`obj-$(CONFIG_LEGACY_BOARD_SEAD3) += board-sead3.o`
MIPS: generic: Add support for Microsemi Ocelot Introduce support for the MIPS based Microsemi Ocelot SoCs. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Allan Nielsen <Allan.Nielsen@microsemi.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/18858/ [jhogan@kernel.org: update ocelot_defconfig specification] Signed-off-by: James Hogan <jhogan@kernel.org> 2018-03-20 14:08:00 +01:00			`obj-$(CONFIG_LEGACY_BOARD_OCELOT) += board-ocelot.o`
MIPS: generic: Add support for Ingenic SoCs Add support for Ingenic SoCs in arch/mips/generic/. The Kconfig changes are here to ensure that it is possible to compile either a generic kernel that supports Ingenic SoCs, or a Ingenic-only kernel, both using the same code base, to avoid duplicated code. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> 2020-09-06 21:29:31 +02:00			`obj-$(CONFIG_MACH_INGENIC) += board-ingenic.o`
MIPS: generic: Fix Makefile alignment Fix whitespace of generic platform Makefile so that obj-y values align. Fixes: f2d0b0d5c171 ("MIPS: ranchu: Add Ranchu as a new generic-based board") Signed-off-by: James Hogan <jhogan@kernel.org> Reviewed-by: Paul Burton <paul.burton@mips.com> Reviewed-by: Matt Redfearn <matt.redfearn@mips.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Miodrag Dinic <miodrag.dinic@mips.com> Cc: Goran Ferenc <goran.ferenc@mips.com> Cc: Aleksandar Markovic <aleksandar.markovic@mips.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/18582/ 2018-02-02 22:14:11 +00:00			`obj-$(CONFIG_VIRT_BOARD_RANCHU) += board-ranchu.o`