linux-next/drivers/mailbox/mailbox-xgene-slimpro.c

261 lines
6.4 KiB
C
Raw Normal View History

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 13 Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not see http www gnu org licenses this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details [based] [from] [clk] [highbank] [c] you should have received a copy of the gnu general public license along with this program if not see http www gnu org licenses extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 355 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Jilayne Lovejoy <opensource@jilayne.com> Reviewed-by: Steve Winslow <swinslow@gmail.com> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190519154041.837383322@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-19 13:51:43 +00:00
// SPDX-License-Identifier: GPL-2.0-or-later
/*
* APM X-Gene SLIMpro MailBox Driver
*
* Copyright (c) 2015, Applied Micro Circuits Corporation
* Author: Feng Kan fkan@apm.com
*/
#include <linux/acpi.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/mailbox_controller.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/platform_device.h>
#include <linux/spinlock.h>
#define MBOX_CON_NAME "slimpro-mbox"
#define MBOX_REG_SET_OFFSET 0x1000
#define MBOX_CNT 8
#define MBOX_STATUS_AVAIL_MASK BIT(16)
#define MBOX_STATUS_ACK_MASK BIT(0)
/* Configuration and Status Registers */
#define REG_DB_IN 0x00
#define REG_DB_DIN0 0x04
#define REG_DB_DIN1 0x08
#define REG_DB_OUT 0x10
#define REG_DB_DOUT0 0x14
#define REG_DB_DOUT1 0x18
#define REG_DB_STAT 0x20
#define REG_DB_STATMASK 0x24
/**
* X-Gene SlimPRO mailbox channel information
*
* @dev: Device to which it is attached
* @chan: Pointer to mailbox communication channel
* @reg: Base address to access channel registers
* @irq: Interrupt number of the channel
* @rx_msg: Received message storage
*/
struct slimpro_mbox_chan {
struct device *dev;
struct mbox_chan *chan;
void __iomem *reg;
int irq;
u32 rx_msg[3];
};
/**
* X-Gene SlimPRO Mailbox controller data
*
* X-Gene SlimPRO Mailbox controller has 8 communication channels.
* Each channel has a separate IRQ number assigned to it.
*
* @mb_ctrl: Representation of the communication channel controller
* @mc: Array of SlimPRO mailbox channels of the controller
* @chans: Array of mailbox communication channels
*
*/
struct slimpro_mbox {
struct mbox_controller mb_ctrl;
struct slimpro_mbox_chan mc[MBOX_CNT];
struct mbox_chan chans[MBOX_CNT];
};
static void mb_chan_send_msg(struct slimpro_mbox_chan *mb_chan, u32 *msg)
{
writel(msg[1], mb_chan->reg + REG_DB_DOUT0);
writel(msg[2], mb_chan->reg + REG_DB_DOUT1);
writel(msg[0], mb_chan->reg + REG_DB_OUT);
}
static void mb_chan_recv_msg(struct slimpro_mbox_chan *mb_chan)
{
mb_chan->rx_msg[1] = readl(mb_chan->reg + REG_DB_DIN0);
mb_chan->rx_msg[2] = readl(mb_chan->reg + REG_DB_DIN1);
mb_chan->rx_msg[0] = readl(mb_chan->reg + REG_DB_IN);
}
static int mb_chan_status_ack(struct slimpro_mbox_chan *mb_chan)
{
u32 val = readl(mb_chan->reg + REG_DB_STAT);
if (val & MBOX_STATUS_ACK_MASK) {
writel(MBOX_STATUS_ACK_MASK, mb_chan->reg + REG_DB_STAT);
return 1;
}
return 0;
}
static int mb_chan_status_avail(struct slimpro_mbox_chan *mb_chan)
{
u32 val = readl(mb_chan->reg + REG_DB_STAT);
if (val & MBOX_STATUS_AVAIL_MASK) {
mb_chan_recv_msg(mb_chan);
writel(MBOX_STATUS_AVAIL_MASK, mb_chan->reg + REG_DB_STAT);
return 1;
}
return 0;
}
static irqreturn_t slimpro_mbox_irq(int irq, void *id)
{
struct slimpro_mbox_chan *mb_chan = id;
if (mb_chan_status_ack(mb_chan))
mbox_chan_txdone(mb_chan->chan, 0);
if (mb_chan_status_avail(mb_chan))
mbox_chan_received_data(mb_chan->chan, mb_chan->rx_msg);
return IRQ_HANDLED;
}
static int slimpro_mbox_send_data(struct mbox_chan *chan, void *msg)
{
struct slimpro_mbox_chan *mb_chan = chan->con_priv;
mb_chan_send_msg(mb_chan, msg);
return 0;
}
static int slimpro_mbox_startup(struct mbox_chan *chan)
{
struct slimpro_mbox_chan *mb_chan = chan->con_priv;
int rc;
u32 val;
rc = devm_request_irq(mb_chan->dev, mb_chan->irq, slimpro_mbox_irq, 0,
MBOX_CON_NAME, mb_chan);
if (unlikely(rc)) {
dev_err(mb_chan->dev, "failed to register mailbox interrupt %d\n",
mb_chan->irq);
return rc;
}
/* Enable HW interrupt */
writel(MBOX_STATUS_ACK_MASK | MBOX_STATUS_AVAIL_MASK,
mb_chan->reg + REG_DB_STAT);
/* Unmask doorbell status interrupt */
val = readl(mb_chan->reg + REG_DB_STATMASK);
val &= ~(MBOX_STATUS_ACK_MASK | MBOX_STATUS_AVAIL_MASK);
writel(val, mb_chan->reg + REG_DB_STATMASK);
return 0;
}
static void slimpro_mbox_shutdown(struct mbox_chan *chan)
{
struct slimpro_mbox_chan *mb_chan = chan->con_priv;
u32 val;
/* Mask doorbell status interrupt */
val = readl(mb_chan->reg + REG_DB_STATMASK);
val |= (MBOX_STATUS_ACK_MASK | MBOX_STATUS_AVAIL_MASK);
writel(val, mb_chan->reg + REG_DB_STATMASK);
devm_free_irq(mb_chan->dev, mb_chan->irq, mb_chan);
}
static const struct mbox_chan_ops slimpro_mbox_ops = {
.send_data = slimpro_mbox_send_data,
.startup = slimpro_mbox_startup,
.shutdown = slimpro_mbox_shutdown,
};
static int slimpro_mbox_probe(struct platform_device *pdev)
{
struct slimpro_mbox *ctx;
void __iomem *mb_base;
int rc;
int i;
ctx = devm_kzalloc(&pdev->dev, sizeof(struct slimpro_mbox), GFP_KERNEL);
if (!ctx)
return -ENOMEM;
platform_set_drvdata(pdev, ctx);
mb_base = devm_platform_ioremap_resource(pdev, 0);
if (IS_ERR(mb_base))
return PTR_ERR(mb_base);
/* Setup mailbox links */
for (i = 0; i < MBOX_CNT; i++) {
ctx->mc[i].irq = platform_get_irq(pdev, i);
if (ctx->mc[i].irq < 0) {
if (i == 0) {
dev_err(&pdev->dev, "no available IRQ\n");
return -EINVAL;
}
dev_info(&pdev->dev, "no IRQ for channel %d\n", i);
break;
}
ctx->mc[i].dev = &pdev->dev;
ctx->mc[i].reg = mb_base + i * MBOX_REG_SET_OFFSET;
ctx->mc[i].chan = &ctx->chans[i];
ctx->chans[i].con_priv = &ctx->mc[i];
}
/* Setup mailbox controller */
ctx->mb_ctrl.dev = &pdev->dev;
ctx->mb_ctrl.chans = ctx->chans;
ctx->mb_ctrl.txdone_irq = true;
ctx->mb_ctrl.ops = &slimpro_mbox_ops;
ctx->mb_ctrl.num_chans = i;
rc = devm_mbox_controller_register(&pdev->dev, &ctx->mb_ctrl);
if (rc) {
dev_err(&pdev->dev,
"APM X-Gene SLIMpro MailBox register failed:%d\n", rc);
return rc;
}
dev_info(&pdev->dev, "APM X-Gene SLIMpro MailBox registered\n");
return 0;
}
static const struct of_device_id slimpro_of_match[] = {
{.compatible = "apm,xgene-slimpro-mbox" },
{ },
};
MODULE_DEVICE_TABLE(of, slimpro_of_match);
#ifdef CONFIG_ACPI
static const struct acpi_device_id slimpro_acpi_ids[] = {
{"APMC0D01", 0},
{}
};
MODULE_DEVICE_TABLE(acpi, slimpro_acpi_ids);
#endif
static struct platform_driver slimpro_mbox_driver = {
.probe = slimpro_mbox_probe,
.driver = {
.name = "xgene-slimpro-mbox",
.of_match_table = of_match_ptr(slimpro_of_match),
.acpi_match_table = ACPI_PTR(slimpro_acpi_ids)
},
};
static int __init slimpro_mbox_init(void)
{
return platform_driver_register(&slimpro_mbox_driver);
}
static void __exit slimpro_mbox_exit(void)
{
platform_driver_unregister(&slimpro_mbox_driver);
}
subsys_initcall(slimpro_mbox_init);
module_exit(slimpro_mbox_exit);
MODULE_DESCRIPTION("APM X-Gene SLIMpro Mailbox Driver");
MODULE_LICENSE("GPL");