Kernel/linux-next
1
0
Fork 0
mirror of https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git synced 2025-01-09 15:29:16 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
linux-next/drivers/phy/qualcomm/phy-qcom-qmp.h

136 lines
4.3 KiB
C
Raw Normal View History

phy: qcom-qmp: Use the correct style for SPDX License Identifier This patch corrects the SPDX License Identifier style in header files related to PHY drivers for Qualcomm platforms. For C header files Documentation/process/license-rules.rst mandates C-like comments (opposed to C source files where C++ style should be used). Changes made by using a script provided by Joe Perches here: https://lkml.org/lkml/2019/2/7/46. Suggested-by: Joe Perches <joe@perches.com> Signed-off-by: Nishad Kamdar <nishadkamdar@gmail.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2019-11-27 19:32:33 +05:30
/* SPDX-License-Identifier: GPL-2.0 */
phy: qcom-qmp: Move register offsets to header file New revision (v3) of QMP PHY uses different offsets for almost all of the registers. Hence, move these definitions to header file so that updated offsets can be added for QMP v3. Signed-off-by: Manu Gautam <mgautam@codeaurora.org> Reviewed-by: Vivek Gautam <vivek.gautam@codeaurora.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2018-01-16 16:27:05 +05:30
/*
* Copyright (c) 2017, The Linux Foundation. All rights reserved.
*/
#ifndef QCOM_PHY_QMP_H_
#define QCOM_PHY_QMP_H_
phy: qcom-qmp: move QSERDES registers to separate header Move QSERDES V2 registers to the separate header. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20220705094320.1313312-9-dmitry.baryshkov@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-07-05 12:43:00 +03:00
#include "phy-qcom-qmp-qserdes-com.h"
#include "phy-qcom-qmp-qserdes-txrx.h"
phy: qcom-qmp: move QSERDES V3 registers to separate headers Move QSERDES V3 registers to the separate headers. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20220705094320.1313312-10-dmitry.baryshkov@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-07-05 12:43:01 +03:00
#include "phy-qcom-qmp-qserdes-com-v3.h"
#include "phy-qcom-qmp-qserdes-txrx-v3.h"
phy: qcom-qmp: move QSERDES V4 registers to separate headers Move QSERDES V4 registers to the separate headers. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20220705094320.1313312-11-dmitry.baryshkov@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-07-05 12:43:02 +03:00
#include "phy-qcom-qmp-qserdes-com-v4.h"
#include "phy-qcom-qmp-qserdes-txrx-v4.h"
phy: qcom-qmp: split allegedly 4.20 and 5.20 TX/RX registers Split registers definitions belonging allegedly to 4.20 and 5.20 QMP PHYs. They are used for the PCIe QMP PHYs, which have no good open source reference. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20220705094320.1313312-19-dmitry.baryshkov@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-07-05 12:43:10 +03:00
#include "phy-qcom-qmp-qserdes-txrx-v4_20.h"
phy: qcom-qmp: move QSERDES V4 registers to separate headers Move QSERDES V4 registers to the separate headers. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20220705094320.1313312-11-dmitry.baryshkov@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-07-05 12:43:02 +03:00
phy: qcom-qmp: move QSERDES V5 registers to separate headers Move QSERDES V5 registers to the separate headers. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20220705094320.1313312-12-dmitry.baryshkov@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-07-05 12:43:03 +03:00
#include "phy-qcom-qmp-qserdes-com-v5.h"
#include "phy-qcom-qmp-qserdes-txrx-v5.h"
phy: qcom-qmp: split allegedly 4.20 and 5.20 TX/RX registers Split registers definitions belonging allegedly to 4.20 and 5.20 QMP PHYs. They are used for the PCIe QMP PHYs, which have no good open source reference. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20220705094320.1313312-19-dmitry.baryshkov@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-07-05 12:43:10 +03:00
#include "phy-qcom-qmp-qserdes-txrx-v5_20.h"
phy: qcom-qmp-combo: Add sc8280xp USB/DP combo phys The SC8280P has two copies of an USB/DP compbo PHY, add support for this to the Qualcomm QMP PHY driver. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220810042303.3583194-5-bjorn.andersson@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-08-09 21:23:03 -07:00
#include "phy-qcom-qmp-qserdes-txrx-v5_5nm.h"
phy: qcom-qmp: move QSERDES V5 registers to separate headers Move QSERDES V5 registers to the separate headers. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20220705094320.1313312-12-dmitry.baryshkov@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-07-05 12:43:03 +03:00
phy: qcom-qmp: qserdes-com: Add v6 register offsets The new SM8550 SoC bumps up the HW version of QMP phy to v6 for USB, UFS and PCIE g3x2. Add the new qserdes com offsets in a dedicated header file. Signed-off-by: Abel Vesa <abel.vesa@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20230117224148.1914627-3-abel.vesa@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-01-18 00:41:44 +02:00
#include "phy-qcom-qmp-qserdes-com-v6.h"
phy: qcom-qmp: qserdes-txrx: Add v6 register offsets The new SM8550 SoC bumps up the HW version of QMP phy to v6 for USB, UFS and PCIE g3x2. Add the new qserdes TX RX offsets in a dedicated header file. Signed-off-by: Abel Vesa <abel.vesa@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20230117224148.1914627-4-abel.vesa@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-01-18 00:41:45 +02:00
#include "phy-qcom-qmp-qserdes-txrx-v6.h"
phy: qcom-qmp: qserdes-txrx: Add v6.20 register offsets The new SM8550 SoC bumps up the HW version of QMP phy to v6.20 for PCIE g4x2. Add the new qserdes TX RX PCIE specific offsets in a dedicated header file. Signed-off-by: Abel Vesa <abel.vesa@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20230208180020.2761766-7-abel.vesa@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-02-08 20:00:15 +02:00
#include "phy-qcom-qmp-qserdes-txrx-v6_20.h"
phy: qcom-qmp: qserdes-lane-shared: Add v6 register offsets The new SM8550 SoC bumps up the HW version of QMP phy to v6.20 for PCIE g4x2. Add the new lane shared PCIE specific offsets in a dedicated header file. Signed-off-by: Abel Vesa <abel.vesa@linaro.org> Link: https://lore.kernel.org/r/20230208180020.2761766-8-abel.vesa@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-02-08 20:00:16 +02:00
#include "phy-qcom-qmp-qserdes-ln-shrd-v6.h"
phy: qcom-qmp: qserdes-com: Add v6 register offsets The new SM8550 SoC bumps up the HW version of QMP phy to v6 for USB, UFS and PCIE g3x2. Add the new qserdes com offsets in a dedicated header file. Signed-off-by: Abel Vesa <abel.vesa@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20230117224148.1914627-3-abel.vesa@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-01-18 00:41:44 +02:00
phy: qcom-qmp: move QSERDES PLL registers to separate header Move QSERDES PLL registers to the separate header. This register set is unique for the IPQ PCIe Gen3 PHYs. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20220705094320.1313312-13-dmitry.baryshkov@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-07-05 12:43:04 +03:00
#include "phy-qcom-qmp-qserdes-pll.h"
phy: qcom-qmp: add QMP V2 PCIe PHY support for ipq60xx Based on code from downstream Codeaurora tree. The ipq60xx has one gen3 PCIe port. Signed-off-by: Selvam Sathappan Periakaruppan <speriaka@codeaurora.org> Signed-off-by: Baruch Siach <baruch@tkos.co.il> Link: https://lore.kernel.org/r/e24f2bedb8a7346018b58136bcb0a4004d8677a0.1620203062.git.baruch@tkos.co.il Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-05-05 12:18:31 +03:00
phy: qcom-qmp: move PCS V2 registers to separate header Move PCS V2 registers to the separate header. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20220705094320.1313312-14-dmitry.baryshkov@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-07-05 12:43:05 +03:00
#include "phy-qcom-qmp-pcs-v2.h"
phy: qcom-qmp: Move register offsets to header file New revision (v3) of QMP PHY uses different offsets for almost all of the registers. Hence, move these definitions to header file so that updated offsets can be added for QMP v3. Signed-off-by: Manu Gautam <mgautam@codeaurora.org> Reviewed-by: Vivek Gautam <vivek.gautam@codeaurora.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2018-01-16 16:27:05 +05:30
phy: qcom-qmp: move PCS V3 registers to separate headers Move PCS V3 registers to the separate headers. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20220705094320.1313312-15-dmitry.baryshkov@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-07-05 12:43:06 +03:00
#include "phy-qcom-qmp-pcs-v3.h"
phy: qcom-qmp: move PCS V4 registers to separate headers Move PCS V4 registers to the separate headers. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20220705094320.1313312-16-dmitry.baryshkov@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-07-05 12:43:07 +03:00
#include "phy-qcom-qmp-pcs-v4.h"
phy: qcom-qmp: split allegedly 4.20 and 5.20 PCS registers Split registers definitions belonging allegedly to 4.20 and 5.20 QMP PHYs. They are used for the PCIe QMP PHYs, which have no good open source reference. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20220705094320.1313312-20-dmitry.baryshkov@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-07-05 12:43:11 +03:00
#include "phy-qcom-qmp-pcs-v4_20.h"
phy: qcom-qmp: move PCS V5 registers to separate headers Move PCS V5 registers to the separate headers. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20220705094320.1313312-17-dmitry.baryshkov@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-07-05 12:43:08 +03:00
#include "phy-qcom-qmp-pcs-v5.h"
phy: qcom-qmp: split allegedly 4.20 and 5.20 PCS registers Split registers definitions belonging allegedly to 4.20 and 5.20 QMP PHYs. They are used for the PCIe QMP PHYs, which have no good open source reference. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20220705094320.1313312-20-dmitry.baryshkov@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-07-05 12:43:11 +03:00
phy: qcom-qmp: move type-specific headers to particular driver Remove QMP PHY type-specific headers inclusion from the common header and move them to the specific PHY drivers to cleanup the namespaces used by different drivers. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20221110192248.873973-14-dmitry.baryshkov@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-11-10 22:22:48 +03:00
#include "phy-qcom-qmp-pcs-v5_20.h"
phy: qcom-qmp: move PCIE QHP registers to separate header Move PCIE QHP registers to the separate header. QHP is a sepecial PHY kind used on sdm845 to drive one of PCIe links. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20220705094320.1313312-18-dmitry.baryshkov@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-07-05 12:43:09 +03:00
phy: qcom-qmp: pcs: Add v6 register offsets The new SM8550 SoC bumps up the HW version of QMP phy to v6 for USB, UFS and PCIE g3x2. Add the new PCS offsets in a dedicated header file. Signed-off-by: Abel Vesa <abel.vesa@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20230208180020.2761766-3-abel.vesa@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-02-08 20:00:11 +02:00
#include "phy-qcom-qmp-pcs-v6.h"
phy: qcom-qmp: pcs: Add v6.20 register offsets The new SM8550 SoC bumps up the HW version of QMP phy to v6.20 for PCIE g4x2. Add the new PCS offsets in a dedicated header file. Signed-off-by: Abel Vesa <abel.vesa@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20230208180020.2761766-4-abel.vesa@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-02-08 20:00:12 +02:00
#include "phy-qcom-qmp-pcs-v6_20.h"
phy: qcom-qmp: Add SM8150 QMP USB3 PHY support Add support for SM8150 QMP USB3 PHY with the necessary initialization sequences as well as additional QMP V4 register definitions. Signed-off-by: Jack Pham <jackp@codeaurora.org> Signed-off-by: Wesley Cheng <wcheng@codeaurora.org> Reviewed-by: Manu Gautam <mgautam@codeaurora.org> Link: https://lore.kernel.org/r/1588636467-23409-4-git-send-email-wcheng@codeaurora.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-05-04 16:54:25 -07:00
/* Only for QMP V3 & V4 PHY - DP COM registers */
phy: qcom-qmp: Add register offsets for QMP V3 PHY Registers offsets for QMP V3 PHY are changed from previous versions (1/2), update same in header file. Signed-off-by: Manu Gautam <mgautam@codeaurora.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2018-01-16 16:27:06 +05:30
#define QPHY_V3_DP_COM_PHY_MODE_CTRL 0x00
#define QPHY_V3_DP_COM_SW_RESET 0x04
#define QPHY_V3_DP_COM_POWER_DOWN_CTRL 0x08
#define QPHY_V3_DP_COM_SWI_CTRL 0x0c
#define QPHY_V3_DP_COM_TYPEC_CTRL 0x10
#define QPHY_V3_DP_COM_TYPEC_PWRDN_CTRL 0x14
#define QPHY_V3_DP_COM_RESET_OVRD_CTRL 0x1c
phy: qcom-qmp: move QSERDES V3 registers to separate headers Move QSERDES V3 registers to the separate headers. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20220705094320.1313312-10-dmitry.baryshkov@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-07-05 12:43:01 +03:00
/* QSERDES V3 COM bits */
phy: qcom-qmp: Add support for DP in USB3+DP combo phy Add support for the USB3 + DisplayPort (DP) "combo" phy to the qmp phy driver. We already have support for the USB3 part of the combo phy, so most additions are for the DP phy. Split up the qcom_qmp_phy{enable,disable}() functions into the phy init, power on, power off, and exit functions that the common phy framework expects so that the DP phy can add even more phy ops like phy_calibrate() and phy_configure(). This allows us to initialize the DP PHY and configure the AUX channel before powering on the PHY at the link rate that was negotiated during link training. The general design is as follows: 1) DP controller calls phy_init() to initialize the PHY and configure the dp_com register region. 2) DP controller calls phy_configure() to tune the link rate and voltage swing and pre-emphasis settings. 3) DP controller calls phy_power_on() to enable the PLL and power on the phy. 4) DP controller calls phy_configure() again to tune the voltage swing and pre-emphasis settings determind during link training. 5) DP controller calls phy_calibrate() some number of times to change the aux settings if the aux channel times out during link training. 6) DP controller calls phy_power_off() if the link rate is to be changed and goes back to step 2 to try again at a different link rate. 5) DP controller calls phy_power_off() and then phy_exit() to power down the PHY when it is done. The DP PHY contains a PLL that is different from the one used for the USB3 PHY. Instead of a pipe clk there is a link clk and a pixel clk output from the DP PLL after going through various dividers. Introduce clk ops for these two clks that just tell the child clks what the frequency of the pixel and link are. When the phy link rate is configured we call clk_set_rate() to update the child clks in the display clk controller on what rate is in use. The clk frequencies always differ based on the link rate (i.e. 1.6Gb/s 2.7Gb/s, 5.4Gb/s, or 8.1Gb/s corresponding to various transmission modes like HBR1, HBR2 or HBR3) so we simply store the link rate and use that to calculate the clk frequencies. The PLL enable sequence is a little different from other QMP phy PLLs so we power on the PLL in qcom_qmp_phy_configure_dp_phy() that gets called from phy_power_on(). This should probably be split out better so that each phy has a way to run the final PLL/PHY enable sequence. This code is based on a submission of this phy and PLL in the drm subsystem. Signed-off-by: Stephen Boyd <swboyd@chromium.org> Cc: Jeykumar Sankaran <jsanka@codeaurora.org> Cc: Chandan Uddaraju <chandanu@codeaurora.org> Cc: Vara Reddy <varar@codeaurora.org> Cc: Tanmay Shah <tanmay@codeaurora.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Manu Gautam <mgautam@codeaurora.org> Cc: Sandeep Maheswaram <sanm@codeaurora.org> Cc: Douglas Anderson <dianders@chromium.org> Cc: Sean Paul <seanpaul@chromium.org> Cc: Stephen Boyd <sboyd@kernel.org> Cc: Jonathan Marek <jonathan@marek.ca> Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Cc: Rob Clark <robdclark@chromium.org> Link: https://lore.kernel.org/r/20200609034623.10844-1-tanmay@codeaurora.org Link: https://lore.kernel.org/r/20200916231202.3637932-8-swboyd@chromium.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-09-16 16:11:59 -07:00
# define QSERDES_V3_COM_BIAS_EN 0x0001
# define QSERDES_V3_COM_BIAS_EN_MUX 0x0002
# define QSERDES_V3_COM_CLKBUF_R_EN 0x0004
# define QSERDES_V3_COM_CLKBUF_L_EN 0x0008
# define QSERDES_V3_COM_EN_SYSCLK_TX_SEL 0x0010
# define QSERDES_V3_COM_CLKBUF_RX_DRIVE_L 0x0020
# define QSERDES_V3_COM_CLKBUF_RX_DRIVE_R 0x0040
phy: qcom-qmp: Add register offsets for QMP V3 PHY Registers offsets for QMP V3 PHY are changed from previous versions (1/2), update same in header file. Signed-off-by: Manu Gautam <mgautam@codeaurora.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2018-01-16 16:27:06 +05:30
phy: qcom-qmp: move QSERDES V3 registers to separate headers Move QSERDES V3 registers to the separate headers. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20220705094320.1313312-10-dmitry.baryshkov@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-07-05 12:43:01 +03:00
/* QSERDES V3 TX bits */
phy: qcom-qmp: Add support for DP in USB3+DP combo phy Add support for the USB3 + DisplayPort (DP) "combo" phy to the qmp phy driver. We already have support for the USB3 part of the combo phy, so most additions are for the DP phy. Split up the qcom_qmp_phy{enable,disable}() functions into the phy init, power on, power off, and exit functions that the common phy framework expects so that the DP phy can add even more phy ops like phy_calibrate() and phy_configure(). This allows us to initialize the DP PHY and configure the AUX channel before powering on the PHY at the link rate that was negotiated during link training. The general design is as follows: 1) DP controller calls phy_init() to initialize the PHY and configure the dp_com register region. 2) DP controller calls phy_configure() to tune the link rate and voltage swing and pre-emphasis settings. 3) DP controller calls phy_power_on() to enable the PLL and power on the phy. 4) DP controller calls phy_configure() again to tune the voltage swing and pre-emphasis settings determind during link training. 5) DP controller calls phy_calibrate() some number of times to change the aux settings if the aux channel times out during link training. 6) DP controller calls phy_power_off() if the link rate is to be changed and goes back to step 2 to try again at a different link rate. 5) DP controller calls phy_power_off() and then phy_exit() to power down the PHY when it is done. The DP PHY contains a PLL that is different from the one used for the USB3 PHY. Instead of a pipe clk there is a link clk and a pixel clk output from the DP PLL after going through various dividers. Introduce clk ops for these two clks that just tell the child clks what the frequency of the pixel and link are. When the phy link rate is configured we call clk_set_rate() to update the child clks in the display clk controller on what rate is in use. The clk frequencies always differ based on the link rate (i.e. 1.6Gb/s 2.7Gb/s, 5.4Gb/s, or 8.1Gb/s corresponding to various transmission modes like HBR1, HBR2 or HBR3) so we simply store the link rate and use that to calculate the clk frequencies. The PLL enable sequence is a little different from other QMP phy PLLs so we power on the PLL in qcom_qmp_phy_configure_dp_phy() that gets called from phy_power_on(). This should probably be split out better so that each phy has a way to run the final PLL/PHY enable sequence. This code is based on a submission of this phy and PLL in the drm subsystem. Signed-off-by: Stephen Boyd <swboyd@chromium.org> Cc: Jeykumar Sankaran <jsanka@codeaurora.org> Cc: Chandan Uddaraju <chandanu@codeaurora.org> Cc: Vara Reddy <varar@codeaurora.org> Cc: Tanmay Shah <tanmay@codeaurora.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Manu Gautam <mgautam@codeaurora.org> Cc: Sandeep Maheswaram <sanm@codeaurora.org> Cc: Douglas Anderson <dianders@chromium.org> Cc: Sean Paul <seanpaul@chromium.org> Cc: Stephen Boyd <sboyd@kernel.org> Cc: Jonathan Marek <jonathan@marek.ca> Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Cc: Rob Clark <robdclark@chromium.org> Link: https://lore.kernel.org/r/20200609034623.10844-1-tanmay@codeaurora.org Link: https://lore.kernel.org/r/20200916231202.3637932-8-swboyd@chromium.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-09-16 16:11:59 -07:00
# define DP_PHY_TXn_TX_EMP_POST1_LVL_MASK 0x001f
# define DP_PHY_TXn_TX_EMP_POST1_LVL_MUX_EN 0x0020
# define DP_PHY_TXn_TX_DRV_LVL_MASK 0x001f
# define DP_PHY_TXn_TX_DRV_LVL_MUX_EN 0x0020
phy: qcom-qmp: rename common registers A plenty of DP PHY registers are common between V3 and V4. To simplify V4 code, rename all common registers. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20210331151614.3810197-5-dmitry.baryshkov@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-03-31 18:16:11 +03:00
/* QMP PHY - DP PHY registers */
#define QSERDES_DP_PHY_REVISION_ID0 0x000
#define QSERDES_DP_PHY_REVISION_ID1 0x004
#define QSERDES_DP_PHY_REVISION_ID2 0x008
#define QSERDES_DP_PHY_REVISION_ID3 0x00c
#define QSERDES_DP_PHY_CFG 0x010
#define QSERDES_DP_PHY_PD_CTL 0x018
phy: qcom-qmp: Add support for DP in USB3+DP combo phy Add support for the USB3 + DisplayPort (DP) "combo" phy to the qmp phy driver. We already have support for the USB3 part of the combo phy, so most additions are for the DP phy. Split up the qcom_qmp_phy{enable,disable}() functions into the phy init, power on, power off, and exit functions that the common phy framework expects so that the DP phy can add even more phy ops like phy_calibrate() and phy_configure(). This allows us to initialize the DP PHY and configure the AUX channel before powering on the PHY at the link rate that was negotiated during link training. The general design is as follows: 1) DP controller calls phy_init() to initialize the PHY and configure the dp_com register region. 2) DP controller calls phy_configure() to tune the link rate and voltage swing and pre-emphasis settings. 3) DP controller calls phy_power_on() to enable the PLL and power on the phy. 4) DP controller calls phy_configure() again to tune the voltage swing and pre-emphasis settings determind during link training. 5) DP controller calls phy_calibrate() some number of times to change the aux settings if the aux channel times out during link training. 6) DP controller calls phy_power_off() if the link rate is to be changed and goes back to step 2 to try again at a different link rate. 5) DP controller calls phy_power_off() and then phy_exit() to power down the PHY when it is done. The DP PHY contains a PLL that is different from the one used for the USB3 PHY. Instead of a pipe clk there is a link clk and a pixel clk output from the DP PLL after going through various dividers. Introduce clk ops for these two clks that just tell the child clks what the frequency of the pixel and link are. When the phy link rate is configured we call clk_set_rate() to update the child clks in the display clk controller on what rate is in use. The clk frequencies always differ based on the link rate (i.e. 1.6Gb/s 2.7Gb/s, 5.4Gb/s, or 8.1Gb/s corresponding to various transmission modes like HBR1, HBR2 or HBR3) so we simply store the link rate and use that to calculate the clk frequencies. The PLL enable sequence is a little different from other QMP phy PLLs so we power on the PLL in qcom_qmp_phy_configure_dp_phy() that gets called from phy_power_on(). This should probably be split out better so that each phy has a way to run the final PLL/PHY enable sequence. This code is based on a submission of this phy and PLL in the drm subsystem. Signed-off-by: Stephen Boyd <swboyd@chromium.org> Cc: Jeykumar Sankaran <jsanka@codeaurora.org> Cc: Chandan Uddaraju <chandanu@codeaurora.org> Cc: Vara Reddy <varar@codeaurora.org> Cc: Tanmay Shah <tanmay@codeaurora.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Manu Gautam <mgautam@codeaurora.org> Cc: Sandeep Maheswaram <sanm@codeaurora.org> Cc: Douglas Anderson <dianders@chromium.org> Cc: Sean Paul <seanpaul@chromium.org> Cc: Stephen Boyd <sboyd@kernel.org> Cc: Jonathan Marek <jonathan@marek.ca> Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Cc: Rob Clark <robdclark@chromium.org> Link: https://lore.kernel.org/r/20200609034623.10844-1-tanmay@codeaurora.org Link: https://lore.kernel.org/r/20200916231202.3637932-8-swboyd@chromium.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-09-16 16:11:59 -07:00
# define DP_PHY_PD_CTL_PWRDN 0x001
# define DP_PHY_PD_CTL_PSR_PWRDN 0x002
# define DP_PHY_PD_CTL_AUX_PWRDN 0x004
# define DP_PHY_PD_CTL_LANE_0_1_PWRDN 0x008
# define DP_PHY_PD_CTL_LANE_2_3_PWRDN 0x010
# define DP_PHY_PD_CTL_PLL_PWRDN 0x020
# define DP_PHY_PD_CTL_DP_CLAMP_EN 0x040
phy: qcom-qmp: rename common registers A plenty of DP PHY registers are common between V3 and V4. To simplify V4 code, rename all common registers. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20210331151614.3810197-5-dmitry.baryshkov@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-03-31 18:16:11 +03:00
#define QSERDES_DP_PHY_MODE 0x01c
#define QSERDES_DP_PHY_AUX_CFG0 0x020
#define QSERDES_DP_PHY_AUX_CFG1 0x024
#define QSERDES_DP_PHY_AUX_CFG2 0x028
#define QSERDES_DP_PHY_AUX_CFG3 0x02c
#define QSERDES_DP_PHY_AUX_CFG4 0x030
#define QSERDES_DP_PHY_AUX_CFG5 0x034
#define QSERDES_DP_PHY_AUX_CFG6 0x038
#define QSERDES_DP_PHY_AUX_CFG7 0x03c
#define QSERDES_DP_PHY_AUX_CFG8 0x040
#define QSERDES_DP_PHY_AUX_CFG9 0x044
phy: qcom-qmp: Add support for DP in USB3+DP combo phy Add support for the USB3 + DisplayPort (DP) "combo" phy to the qmp phy driver. We already have support for the USB3 part of the combo phy, so most additions are for the DP phy. Split up the qcom_qmp_phy{enable,disable}() functions into the phy init, power on, power off, and exit functions that the common phy framework expects so that the DP phy can add even more phy ops like phy_calibrate() and phy_configure(). This allows us to initialize the DP PHY and configure the AUX channel before powering on the PHY at the link rate that was negotiated during link training. The general design is as follows: 1) DP controller calls phy_init() to initialize the PHY and configure the dp_com register region. 2) DP controller calls phy_configure() to tune the link rate and voltage swing and pre-emphasis settings. 3) DP controller calls phy_power_on() to enable the PLL and power on the phy. 4) DP controller calls phy_configure() again to tune the voltage swing and pre-emphasis settings determind during link training. 5) DP controller calls phy_calibrate() some number of times to change the aux settings if the aux channel times out during link training. 6) DP controller calls phy_power_off() if the link rate is to be changed and goes back to step 2 to try again at a different link rate. 5) DP controller calls phy_power_off() and then phy_exit() to power down the PHY when it is done. The DP PHY contains a PLL that is different from the one used for the USB3 PHY. Instead of a pipe clk there is a link clk and a pixel clk output from the DP PLL after going through various dividers. Introduce clk ops for these two clks that just tell the child clks what the frequency of the pixel and link are. When the phy link rate is configured we call clk_set_rate() to update the child clks in the display clk controller on what rate is in use. The clk frequencies always differ based on the link rate (i.e. 1.6Gb/s 2.7Gb/s, 5.4Gb/s, or 8.1Gb/s corresponding to various transmission modes like HBR1, HBR2 or HBR3) so we simply store the link rate and use that to calculate the clk frequencies. The PLL enable sequence is a little different from other QMP phy PLLs so we power on the PLL in qcom_qmp_phy_configure_dp_phy() that gets called from phy_power_on(). This should probably be split out better so that each phy has a way to run the final PLL/PHY enable sequence. This code is based on a submission of this phy and PLL in the drm subsystem. Signed-off-by: Stephen Boyd <swboyd@chromium.org> Cc: Jeykumar Sankaran <jsanka@codeaurora.org> Cc: Chandan Uddaraju <chandanu@codeaurora.org> Cc: Vara Reddy <varar@codeaurora.org> Cc: Tanmay Shah <tanmay@codeaurora.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Manu Gautam <mgautam@codeaurora.org> Cc: Sandeep Maheswaram <sanm@codeaurora.org> Cc: Douglas Anderson <dianders@chromium.org> Cc: Sean Paul <seanpaul@chromium.org> Cc: Stephen Boyd <sboyd@kernel.org> Cc: Jonathan Marek <jonathan@marek.ca> Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Cc: Rob Clark <robdclark@chromium.org> Link: https://lore.kernel.org/r/20200609034623.10844-1-tanmay@codeaurora.org Link: https://lore.kernel.org/r/20200916231202.3637932-8-swboyd@chromium.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-09-16 16:11:59 -07:00
phy: qcom-qmp: rename common registers A plenty of DP PHY registers are common between V3 and V4. To simplify V4 code, rename all common registers. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20210331151614.3810197-5-dmitry.baryshkov@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-03-31 18:16:11 +03:00
/* Only for QMP V3 PHY - DP PHY registers */
phy: qcom-qmp: Add support for DP in USB3+DP combo phy Add support for the USB3 + DisplayPort (DP) "combo" phy to the qmp phy driver. We already have support for the USB3 part of the combo phy, so most additions are for the DP phy. Split up the qcom_qmp_phy{enable,disable}() functions into the phy init, power on, power off, and exit functions that the common phy framework expects so that the DP phy can add even more phy ops like phy_calibrate() and phy_configure(). This allows us to initialize the DP PHY and configure the AUX channel before powering on the PHY at the link rate that was negotiated during link training. The general design is as follows: 1) DP controller calls phy_init() to initialize the PHY and configure the dp_com register region. 2) DP controller calls phy_configure() to tune the link rate and voltage swing and pre-emphasis settings. 3) DP controller calls phy_power_on() to enable the PLL and power on the phy. 4) DP controller calls phy_configure() again to tune the voltage swing and pre-emphasis settings determind during link training. 5) DP controller calls phy_calibrate() some number of times to change the aux settings if the aux channel times out during link training. 6) DP controller calls phy_power_off() if the link rate is to be changed and goes back to step 2 to try again at a different link rate. 5) DP controller calls phy_power_off() and then phy_exit() to power down the PHY when it is done. The DP PHY contains a PLL that is different from the one used for the USB3 PHY. Instead of a pipe clk there is a link clk and a pixel clk output from the DP PLL after going through various dividers. Introduce clk ops for these two clks that just tell the child clks what the frequency of the pixel and link are. When the phy link rate is configured we call clk_set_rate() to update the child clks in the display clk controller on what rate is in use. The clk frequencies always differ based on the link rate (i.e. 1.6Gb/s 2.7Gb/s, 5.4Gb/s, or 8.1Gb/s corresponding to various transmission modes like HBR1, HBR2 or HBR3) so we simply store the link rate and use that to calculate the clk frequencies. The PLL enable sequence is a little different from other QMP phy PLLs so we power on the PLL in qcom_qmp_phy_configure_dp_phy() that gets called from phy_power_on(). This should probably be split out better so that each phy has a way to run the final PLL/PHY enable sequence. This code is based on a submission of this phy and PLL in the drm subsystem. Signed-off-by: Stephen Boyd <swboyd@chromium.org> Cc: Jeykumar Sankaran <jsanka@codeaurora.org> Cc: Chandan Uddaraju <chandanu@codeaurora.org> Cc: Vara Reddy <varar@codeaurora.org> Cc: Tanmay Shah <tanmay@codeaurora.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Manu Gautam <mgautam@codeaurora.org> Cc: Sandeep Maheswaram <sanm@codeaurora.org> Cc: Douglas Anderson <dianders@chromium.org> Cc: Sean Paul <seanpaul@chromium.org> Cc: Stephen Boyd <sboyd@kernel.org> Cc: Jonathan Marek <jonathan@marek.ca> Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Cc: Rob Clark <robdclark@chromium.org> Link: https://lore.kernel.org/r/20200609034623.10844-1-tanmay@codeaurora.org Link: https://lore.kernel.org/r/20200916231202.3637932-8-swboyd@chromium.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-09-16 16:11:59 -07:00
#define QSERDES_V3_DP_PHY_AUX_INTERRUPT_MASK 0x048
# define PHY_AUX_STOP_ERR_MASK 0x01
# define PHY_AUX_DEC_ERR_MASK 0x02
# define PHY_AUX_SYNC_ERR_MASK 0x04
# define PHY_AUX_ALIGN_ERR_MASK 0x08
# define PHY_AUX_REQ_ERR_MASK 0x10
#define QSERDES_V3_DP_PHY_AUX_INTERRUPT_CLEAR 0x04c
#define QSERDES_V3_DP_PHY_AUX_BIST_CFG 0x050
#define QSERDES_V3_DP_PHY_VCO_DIV 0x064
#define QSERDES_V3_DP_PHY_TX0_TX1_LANE_CTL 0x06c
#define QSERDES_V3_DP_PHY_TX2_TX3_LANE_CTL 0x088
#define QSERDES_V3_DP_PHY_SPARE0 0x0ac
#define DP_PHY_SPARE0_MASK 0x0f
#define DP_PHY_SPARE0_ORIENTATION_INFO_SHIFT 0x04(0x0004)
#define QSERDES_V3_DP_PHY_STATUS 0x0c0
phy: qcom-qmp: add support for sm8250-usb3-dp phy Add support for QMP V4 Combo USB3+DP PHY (for SM8250 platform). Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20210331151614.3810197-6-dmitry.baryshkov@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-03-31 18:16:12 +03:00
/* Only for QMP V4 PHY - DP PHY registers */
#define QSERDES_V4_DP_PHY_CFG_1 0x014
#define QSERDES_V4_DP_PHY_AUX_INTERRUPT_MASK 0x054
#define QSERDES_V4_DP_PHY_AUX_INTERRUPT_CLEAR 0x058
#define QSERDES_V4_DP_PHY_VCO_DIV 0x070
#define QSERDES_V4_DP_PHY_TX0_TX1_LANE_CTL 0x078
#define QSERDES_V4_DP_PHY_TX2_TX3_LANE_CTL 0x09c
#define QSERDES_V4_DP_PHY_SPARE0 0x0c8
#define QSERDES_V4_DP_PHY_AUX_INTERRUPT_STATUS 0x0d8
#define QSERDES_V4_DP_PHY_STATUS 0x0dc
phy: qcom: qmp-combo: reuse register layouts for even more registers Instead of passing additional registers to qmp_combo_configure_dp_swing(), reuse qphy_reg_layout and add those registers to register layout maps. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20230621153317.1025914-4-dmitry.baryshkov@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-06-21 18:33:13 +03:00
#define QSERDES_V5_DP_PHY_STATUS 0x0dc
phy: qcom-qmp: Add v6 DP register offsets The new SM8550 SoC bumps up the HW version of QMP phy to v6. Add the new DP specific offsets in the generic qmp header file. Signed-off-by: Abel Vesa <abel.vesa@linaro.org> Link: https://lore.kernel.org/r/20230208183421.2874423-6-abel.vesa@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-02-08 20:34:20 +02:00
/* Only for QMP V6 PHY - DP PHY registers */
#define QSERDES_V6_DP_PHY_AUX_INTERRUPT_STATUS 0x0e0
#define QSERDES_V6_DP_PHY_STATUS 0x0e4
phy: qcom-qmp: Move register offsets to header file New revision (v3) of QMP PHY uses different offsets for almost all of the registers. Hence, move these definitions to header file so that updated offsets can be added for QMP v3. Signed-off-by: Manu Gautam <mgautam@codeaurora.org> Reviewed-by: Vivek Gautam <vivek.gautam@codeaurora.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2018-01-16 16:27:05 +05:30
#endif
Reference in New Issue Copy Permalink