mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git
synced 2024-12-28 16:52:18 +00:00
hwmon: (pmbus) Add driver for BluTek BPA-RS600
The BPA-RS600 is a compact 600W AC to DC removable power supply module. Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20210317040231.21490-3-chris.packham@alliedtelesis.co.nz [groeck: Added bpa-rs600 to index.rst] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
This commit is contained in:
Chris Packham
Guenter Roeck
parent
90e85e6309
commit
15b2703e5e
74
Documentation/hwmon/bpa-rs600.rst
Normal file
74
Documentation/hwmon/bpa-rs600.rst
Normal file
@ -0,0 +1,74 @@
|
||||
.. SPDX-License-Identifier: GPL-2.0
|
||||
|
||||
Kernel driver bpa-rs600
|
||||
=======================
|
||||
|
||||
Supported chips:
|
||||
|
||||
* BPA-RS600-120
|
||||
|
||||
Datasheet: Publicly available at the BluTek website
|
||||
http://blutekpower.com/wp-content/uploads/2019/01/BPA-RS600-120-07-19-2018.pdf
|
||||
|
||||
Authors:
|
||||
- Chris Packham <chris.packham@alliedtelesis.co.nz>
|
||||
|
||||
Description
|
||||
-----------
|
||||
|
||||
The BPA-RS600 is a compact 600W removable power supply module.
|
||||
|
||||
Usage Notes
|
||||
-----------
|
||||
|
||||
This driver does not probe for PMBus devices. You will have to instantiate
|
||||
devices explicitly.
|
||||
|
||||
Sysfs attributes
|
||||
----------------
|
||||
|
||||
======================= ============================================
|
||||
curr1_label "iin"
|
||||
curr1_input Measured input current
|
||||
curr1_max Maximum input current
|
||||
curr1_max_alarm Input current high alarm
|
||||
|
||||
curr2_label "iout1"
|
||||
curr2_input Measured output current
|
||||
curr2_max Maximum output current
|
||||
curr2_max_alarm Output current high alarm
|
||||
|
||||
fan1_input Measured fan speed
|
||||
fan1_alarm Fan warning
|
||||
fan1_fault Fan fault
|
||||
|
||||
in1_label "vin"
|
||||
in1_input Measured input voltage
|
||||
in1_max Maximum input voltage
|
||||
in1_max_alarm Input voltage high alarm
|
||||
in1_min Minimum input voltage
|
||||
in1_min_alarm Input voltage low alarm
|
||||
|
||||
in2_label "vout1"
|
||||
in2_input Measured output voltage
|
||||
in2_max Maximum output voltage
|
||||
in2_max_alarm Output voltage high alarm
|
||||
in2_min Maximum output voltage
|
||||
in2_min_alarm Output voltage low alarm
|
||||
|
||||
power1_label "pin"
|
||||
power1_input Measured input power
|
||||
power1_alarm Input power alarm
|
||||
power1_max Maximum input power
|
||||
|
||||
power2_label "pout1"
|
||||
power2_input Measured output power
|
||||
power2_max Maximum output power
|
||||
power2_max_alarm Output power high alarm
|
||||
|
||||
temp1_input Measured temperature around input connector
|
||||
temp1_alarm Temperature alarm
|
||||
|
||||
temp2_input Measured temperature around output connector
|
||||
temp2_alarm Temperature alarm
|
||||
======================= ============================================
|
||||
@ -45,6 +45,7 @@ Hardware Monitoring Kernel Drivers
|
||||
aspeed-pwm-tacho
|
||||
bcm54140
|
||||
bel-pfe
|
||||
bpa-rs600
|
||||
bt1-pvt
|
||||
coretemp
|
||||
corsair-cpro
|
||||
|
||||
@ -56,6 +56,15 @@ config SENSORS_BEL_PFE
|
||||
This driver can also be built as a module. If so, the module will
|
||||
be called bel-pfe.
|
||||
|
||||
config SENSORS_BPA_RS600
|
||||
tristate "BluTek BPA-RS600 Power Supplies"
|
||||
help
|
||||
If you say yes here you get hardware monitoring support for BluTek
|
||||
BPA-RS600 Power Supplies.
|
||||
|
||||
This driver can also be built as a module. If so, the module will
|
||||
be called bpa-rs600.
|
||||
|
||||
config SENSORS_IBM_CFFPS
|
||||
tristate "IBM Common Form Factor Power Supply"
|
||||
depends on LEDS_CLASS
|
||||
|
||||
@ -8,6 +8,7 @@ obj-$(CONFIG_SENSORS_PMBUS) += pmbus.o
|
||||
obj-$(CONFIG_SENSORS_ADM1266) += adm1266.o
|
||||
obj-$(CONFIG_SENSORS_ADM1275) += adm1275.o
|
||||
obj-$(CONFIG_SENSORS_BEL_PFE) += bel-pfe.o
|
||||
obj-$(CONFIG_SENSORS_BPA_RS600) += bpa-rs600.o
|
||||
obj-$(CONFIG_SENSORS_IBM_CFFPS) += ibm-cffps.o
|
||||
obj-$(CONFIG_SENSORS_INSPUR_IPSPS) += inspur-ipsps.o
|
||||
obj-$(CONFIG_SENSORS_IR35221) += ir35221.o
|
||||
|
||||
172
drivers/hwmon/pmbus/bpa-rs600.c
Normal file
172
drivers/hwmon/pmbus/bpa-rs600.c
Normal file
@ -0,0 +1,172 @@
|
||||
// SPDX-License-Identifier: GPL-2.0-or-later
|
||||
/*
|
||||
* Hardware monitoring driver for BluTek BPA-RS600 Power Supplies
|
||||
*
|
||||
* Copyright 2021 Allied Telesis Labs
|
||||
*/
|
||||
|
||||
#include <linux/i2c.h>
|
||||
#include <linux/init.h>
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/pmbus.h>
|
||||
#include "pmbus.h"
|
||||
|
||||
#define BPARS600_MFR_VIN_MIN 0xa0
|
||||
#define BPARS600_MFR_VIN_MAX 0xa1
|
||||
#define BPARS600_MFR_IIN_MAX 0xa2
|
||||
#define BPARS600_MFR_PIN_MAX 0xa3
|
||||
#define BPARS600_MFR_VOUT_MIN 0xa4
|
||||
#define BPARS600_MFR_VOUT_MAX 0xa5
|
||||
#define BPARS600_MFR_IOUT_MAX 0xa6
|
||||
#define BPARS600_MFR_POUT_MAX 0xa7
|
||||
|
||||
static int bpa_rs600_read_byte_data(struct i2c_client *client, int page, int reg)
|
||||
{
|
||||
int ret;
|
||||
|
||||
if (page > 0)
|
||||
return -ENXIO;
|
||||
|
||||
switch (reg) {
|
||||
case PMBUS_FAN_CONFIG_12:
|
||||
/*
|
||||
* Two fans are reported in PMBUS_FAN_CONFIG_12 but there is
|
||||
* only one fan in the module. Mask out the FAN2 bits.
|
||||
*/
|
||||
ret = pmbus_read_byte_data(client, 0, PMBUS_FAN_CONFIG_12);
|
||||
if (ret >= 0)
|
||||
ret &= ~(PB_FAN_2_INSTALLED | PB_FAN_2_PULSE_MASK);
|
||||
break;
|
||||
default:
|
||||
ret = -ENODATA;
|
||||
break;
|
||||
}
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
static int bpa_rs600_read_word_data(struct i2c_client *client, int page, int phase, int reg)
|
||||
{
|
||||
int ret;
|
||||
|
||||
if (page > 0)
|
||||
return -ENXIO;
|
||||
|
||||
switch (reg) {
|
||||
case PMBUS_VIN_UV_WARN_LIMIT:
|
||||
ret = pmbus_read_word_data(client, 0, 0xff, BPARS600_MFR_VIN_MIN);
|
||||
break;
|
||||
case PMBUS_VIN_OV_WARN_LIMIT:
|
||||
ret = pmbus_read_word_data(client, 0, 0xff, BPARS600_MFR_VIN_MAX);
|
||||
break;
|
||||
case PMBUS_VOUT_UV_WARN_LIMIT:
|
||||
ret = pmbus_read_word_data(client, 0, 0xff, BPARS600_MFR_VOUT_MIN);
|
||||
break;
|
||||
case PMBUS_VOUT_OV_WARN_LIMIT:
|
||||
ret = pmbus_read_word_data(client, 0, 0xff, BPARS600_MFR_VOUT_MAX);
|
||||
break;
|
||||
case PMBUS_IIN_OC_WARN_LIMIT:
|
||||
ret = pmbus_read_word_data(client, 0, 0xff, BPARS600_MFR_IIN_MAX);
|
||||
break;
|
||||
case PMBUS_IOUT_OC_WARN_LIMIT:
|
||||
ret = pmbus_read_word_data(client, 0, 0xff, BPARS600_MFR_IOUT_MAX);
|
||||
break;
|
||||
case PMBUS_PIN_OP_WARN_LIMIT:
|
||||
ret = pmbus_read_word_data(client, 0, 0xff, BPARS600_MFR_PIN_MAX);
|
||||
break;
|
||||
case PMBUS_POUT_OP_WARN_LIMIT:
|
||||
ret = pmbus_read_word_data(client, 0, 0xff, BPARS600_MFR_POUT_MAX);
|
||||
break;
|
||||
case PMBUS_VIN_UV_FAULT_LIMIT:
|
||||
case PMBUS_VIN_OV_FAULT_LIMIT:
|
||||
case PMBUS_VOUT_UV_FAULT_LIMIT:
|
||||
case PMBUS_VOUT_OV_FAULT_LIMIT:
|
||||
/* These commands return data but it is invalid/un-documented */
|
||||
ret = -ENXIO;
|
||||
break;
|
||||
default:
|
||||
if (reg >= PMBUS_VIRT_BASE)
|
||||
ret = -ENXIO;
|
||||
else
|
||||
ret = -ENODATA;
|
||||
break;
|
||||
}
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
static struct pmbus_driver_info bpa_rs600_info = {
|
||||
.pages = 1,
|
||||
.format[PSC_VOLTAGE_IN] = linear,
|
||||
.format[PSC_VOLTAGE_OUT] = linear,
|
||||
.format[PSC_CURRENT_IN] = linear,
|
||||
.format[PSC_CURRENT_OUT] = linear,
|
||||
.format[PSC_POWER] = linear,
|
||||
.format[PSC_TEMPERATURE] = linear,
|
||||
.format[PSC_FAN] = linear,
|
||||
.func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_VOUT |
|
||||
PMBUS_HAVE_IIN | PMBUS_HAVE_IOUT |
|
||||
PMBUS_HAVE_PIN | PMBUS_HAVE_POUT |
|
||||
PMBUS_HAVE_TEMP | PMBUS_HAVE_TEMP2 |
|
||||
PMBUS_HAVE_FAN12 |
|
||||
PMBUS_HAVE_STATUS_VOUT | PMBUS_HAVE_STATUS_IOUT |
|
||||
PMBUS_HAVE_STATUS_INPUT | PMBUS_HAVE_STATUS_TEMP |
|
||||
PMBUS_HAVE_STATUS_FAN12,
|
||||
.read_byte_data = bpa_rs600_read_byte_data,
|
||||
.read_word_data = bpa_rs600_read_word_data,
|
||||
};
|
||||
|
||||
static int bpa_rs600_probe(struct i2c_client *client)
|
||||
{
|
||||
struct device *dev = &client->dev;
|
||||
u8 buf[I2C_SMBUS_BLOCK_MAX + 1];
|
||||
int ret;
|
||||
|
||||
if (!i2c_check_functionality(client->adapter,
|
||||
I2C_FUNC_SMBUS_READ_BYTE_DATA
|
||||
| I2C_FUNC_SMBUS_READ_WORD_DATA
|
||||
| I2C_FUNC_SMBUS_READ_BLOCK_DATA))
|
||||
return -ENODEV;
|
||||
|
||||
ret = i2c_smbus_read_block_data(client, PMBUS_MFR_MODEL, buf);
|
||||
if (ret < 0) {
|
||||
dev_err(dev, "Failed to read Manufacturer Model\n");
|
||||
return ret;
|
||||
}
|
||||
|
||||
if (strncmp(buf, "BPA-RS600", 8)) {
|
||||
buf[ret] = '\0';
|
||||
dev_err(dev, "Unsupported Manufacturer Model '%s'\n", buf);
|
||||
return -ENODEV;
|
||||
}
|
||||
|
||||
return pmbus_do_probe(client, &bpa_rs600_info);
|
||||
}
|
||||
|
||||
static const struct i2c_device_id bpa_rs600_id[] = {
|
||||
{ "bpars600", 0 },
|
||||
{},
|
||||
};
|
||||
MODULE_DEVICE_TABLE(i2c, bpa_rs600_id);
|
||||
|
||||
static const struct of_device_id __maybe_unused bpa_rs600_of_match[] = {
|
||||
{ .compatible = "blutek,bpa-rs600" },
|
||||
{},
|
||||
};
|
||||
MODULE_DEVICE_TABLE(of, bpa_rs600_of_match);
|
||||
|
||||
static struct i2c_driver bpa_rs600_driver = {
|
||||
.driver = {
|
||||
.name = "bpa-rs600",
|
||||
.of_match_table = of_match_ptr(bpa_rs600_of_match),
|
||||
},
|
||||
.probe_new = bpa_rs600_probe,
|
||||
.id_table = bpa_rs600_id,
|
||||
};
|
||||
|
||||
module_i2c_driver(bpa_rs600_driver);
|
||||
|
||||
MODULE_AUTHOR("Chris Packham");
|
||||
MODULE_DESCRIPTION("PMBus driver for BluTek BPA-RS600");
|
||||
MODULE_LICENSE("GPL");
|
||||
Loading…
Reference in New Issue
Block a user