phy: tegra: xusb: Add Tegra234 support

Add support for the XUSB pad controller found on Tegra234 SoCs. It is
mostly similar to the same IP found on Tegra194, because most of
the Tegra234 XUSB PADCTL registers definition and programming sequence
are the same as Tegra194, Tegra234 XUSB PADCTL can share the same
driver with Tegra186 and Tegra194 XUSB PADCTL.

Introduce a new feature, USB2 HW tracking, for Tegra234.
The feature is to enable HW periodical PAD tracking which measure
and capture the electric parameters of USB2.0 PAD.

Signed-off-by: Sing-Han Chen <singhanc@nvidia.com>
Co-developed-by: Wayne Chang <waynec@nvidia.com>
Signed-off-by: Wayne Chang <waynec@nvidia.com>
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://lore.kernel.org/r/20230111110450.24617-6-jonathanh@nvidia.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
This commit is contained in:
Sing-Han Chen 2023-01-11 11:04:49 +00:00 committed by Vinod Koul
parent e5f9124404
commit 5c7f94f8ba
4 changed files with 91 additions and 3 deletions

View File

@ -7,4 +7,5 @@ phy-tegra-xusb-$(CONFIG_ARCH_TEGRA_132_SOC) += xusb-tegra124.o
phy-tegra-xusb-$(CONFIG_ARCH_TEGRA_210_SOC) += xusb-tegra210.o
phy-tegra-xusb-$(CONFIG_ARCH_TEGRA_186_SOC) += xusb-tegra186.o
phy-tegra-xusb-$(CONFIG_ARCH_TEGRA_194_SOC) += xusb-tegra186.o
phy-tegra-xusb-$(CONFIG_ARCH_TEGRA_234_SOC) += xusb-tegra186.o
obj-$(CONFIG_PHY_TEGRA194_P2U) += phy-tegra194-p2u.o

View File

@ -89,6 +89,11 @@
#define USB2_TRK_START_TIMER(x) (((x) & 0x7f) << 12)
#define USB2_TRK_DONE_RESET_TIMER(x) (((x) & 0x7f) << 19)
#define USB2_PD_TRK BIT(26)
#define USB2_TRK_COMPLETED BIT(31)
#define XUSB_PADCTL_USB2_BIAS_PAD_CTL2 0x28c
#define USB2_TRK_HW_MODE BIT(0)
#define CYA_TRK_CODE_UPDATE_ON_IDLE BIT(31)
#define XUSB_PADCTL_HSIC_PADX_CTL0(x) (0x300 + (x) * 0x20)
#define HSIC_PD_TX_DATA0 BIT(1)
@ -609,9 +614,31 @@ static void tegra186_utmi_bias_pad_power_on(struct tegra_xusb_padctl *padctl)
value &= ~USB2_PD_TRK;
padctl_writel(padctl, value, XUSB_PADCTL_USB2_BIAS_PAD_CTL1);
udelay(100);
if (padctl->soc->poll_trk_completed) {
err = padctl_readl_poll(padctl, XUSB_PADCTL_USB2_BIAS_PAD_CTL1,
USB2_TRK_COMPLETED, USB2_TRK_COMPLETED, 100);
if (err) {
/* The failure with polling on trk complete will not
* cause the failure of powering on the bias pad.
*/
dev_warn(dev, "failed to poll USB2 trk completed: %d\n", err);
}
clk_disable_unprepare(priv->usb2_trk_clk);
value = padctl_readl(padctl, XUSB_PADCTL_USB2_BIAS_PAD_CTL1);
value |= USB2_TRK_COMPLETED;
padctl_writel(padctl, value, XUSB_PADCTL_USB2_BIAS_PAD_CTL1);
} else {
udelay(100);
}
if (padctl->soc->trk_hw_mode) {
value = padctl_readl(padctl, XUSB_PADCTL_USB2_BIAS_PAD_CTL2);
value |= USB2_TRK_HW_MODE;
value &= ~CYA_TRK_CODE_UPDATE_ON_IDLE;
padctl_writel(padctl, value, XUSB_PADCTL_USB2_BIAS_PAD_CTL2);
} else {
clk_disable_unprepare(priv->usb2_trk_clk);
}
mutex_unlock(&padctl->lock);
}
@ -637,6 +664,13 @@ static void tegra186_utmi_bias_pad_power_off(struct tegra_xusb_padctl *padctl)
value |= USB2_PD_TRK;
padctl_writel(padctl, value, XUSB_PADCTL_USB2_BIAS_PAD_CTL1);
if (padctl->soc->trk_hw_mode) {
value = padctl_readl(padctl, XUSB_PADCTL_USB2_BIAS_PAD_CTL2);
value &= ~USB2_TRK_HW_MODE;
padctl_writel(padctl, value, XUSB_PADCTL_USB2_BIAS_PAD_CTL2);
clk_disable_unprepare(priv->usb2_trk_clk);
}
mutex_unlock(&padctl->lock);
}
@ -1559,7 +1593,8 @@ const struct tegra_xusb_padctl_soc tegra186_xusb_padctl_soc = {
EXPORT_SYMBOL_GPL(tegra186_xusb_padctl_soc);
#endif
#if IS_ENABLED(CONFIG_ARCH_TEGRA_194_SOC)
#if IS_ENABLED(CONFIG_ARCH_TEGRA_194_SOC) || \
IS_ENABLED(CONFIG_ARCH_TEGRA_234_SOC)
static const char * const tegra194_xusb_padctl_supply_names[] = {
"avdd-usb",
"vclamp-usb",
@ -1615,8 +1650,31 @@ const struct tegra_xusb_padctl_soc tegra194_xusb_padctl_soc = {
.supply_names = tegra194_xusb_padctl_supply_names,
.num_supplies = ARRAY_SIZE(tegra194_xusb_padctl_supply_names),
.supports_gen2 = true,
.poll_trk_completed = true,
};
EXPORT_SYMBOL_GPL(tegra194_xusb_padctl_soc);
const struct tegra_xusb_padctl_soc tegra234_xusb_padctl_soc = {
.num_pads = ARRAY_SIZE(tegra194_pads),
.pads = tegra194_pads,
.ports = {
.usb2 = {
.ops = &tegra186_usb2_port_ops,
.count = 4,
},
.usb3 = {
.ops = &tegra186_usb3_port_ops,
.count = 4,
},
},
.ops = &tegra186_xusb_padctl_ops,
.supply_names = tegra194_xusb_padctl_supply_names,
.num_supplies = ARRAY_SIZE(tegra194_xusb_padctl_supply_names),
.supports_gen2 = true,
.poll_trk_completed = true,
.trk_hw_mode = true,
};
EXPORT_SYMBOL_GPL(tegra234_xusb_padctl_soc);
#endif
MODULE_AUTHOR("JC Kuo <jckuo@nvidia.com>");

View File

@ -71,6 +71,12 @@ static const struct of_device_id tegra_xusb_padctl_of_match[] = {
.compatible = "nvidia,tegra194-xusb-padctl",
.data = &tegra194_xusb_padctl_soc,
},
#endif
#if defined(CONFIG_ARCH_TEGRA_234_SOC)
{
.compatible = "nvidia,tegra234-xusb-padctl",
.data = &tegra234_xusb_padctl_soc,
},
#endif
{ }
};

View File

@ -8,6 +8,7 @@
#define __PHY_TEGRA_XUSB_H
#include <linux/io.h>
#include <linux/iopoll.h>
#include <linux/mutex.h>
#include <linux/workqueue.h>
@ -431,6 +432,8 @@ struct tegra_xusb_padctl_soc {
unsigned int num_supplies;
bool supports_gen2;
bool need_fake_usb3_port;
bool poll_trk_completed;
bool trk_hw_mode;
};
struct tegra_xusb_padctl {
@ -473,6 +476,23 @@ static inline u32 padctl_readl(struct tegra_xusb_padctl *padctl,
return value;
}
static inline u32 padctl_readl_poll(struct tegra_xusb_padctl *padctl,
unsigned long offset, u32 val, u32 mask,
int us)
{
u32 regval;
int err;
err = readl_poll_timeout(padctl->regs + offset, regval,
(regval & mask) == val, 1, us);
if (err) {
dev_err(padctl->dev, "%08lx poll timeout > %08x\n", offset,
regval);
}
return err;
}
struct tegra_xusb_lane *tegra_xusb_find_lane(struct tegra_xusb_padctl *padctl,
const char *name,
unsigned int index);
@ -489,5 +509,8 @@ extern const struct tegra_xusb_padctl_soc tegra186_xusb_padctl_soc;
#if defined(CONFIG_ARCH_TEGRA_194_SOC)
extern const struct tegra_xusb_padctl_soc tegra194_xusb_padctl_soc;
#endif
#if defined(CONFIG_ARCH_TEGRA_234_SOC)
extern const struct tegra_xusb_padctl_soc tegra234_xusb_padctl_soc;
#endif
#endif /* __PHY_TEGRA_XUSB_H */