Kernel/linux-next
1
0
Fork 0
mirror of https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git synced 2024-12-28 16:52:18 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity

docs: net: bonding: fix typos

Browse Source 
The bonding documentation had several "insure" which is not
properly used in the context. Suggest to change to "ensure"
to improve readability.

Signed-off-by: shunlizhou <shunlizhou@aliyun.com>
Link: https://patch.msgid.link/20241216135447.57681-1-shunlizhou@aliyun.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This commit is contained in:
shunlizhou 2024-12-16 13:54:46 +00:00 committed by Jakub Kicinski
parent c9cfced173
commit 65c233d8e3
1 changed files with 4 additions and 4 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

8
Documentation/networking/bonding.rst
View File

@ -1963,7 +1963,7 @@ obtain its hardware address from the first slave, which might not
match the hardware address of the VLAN interfaces (which was
ultimately copied from an earlier slave).
There are two methods to insure that the VLAN device operates
There are two methods to ensure that the VLAN device operates
with the correct hardware address if all slaves are removed from a
bond interface:
@ -2078,7 +2078,7 @@ as an unsolicited ARP reply (because ARP matches replies on an
interface basis), and is discarded. The MII monitor is not affected
by the state of the routing table.
The solution here is simply to insure that slaves do not have
The solution here is simply to ensure that slaves do not have
routes of their own, and if for some reason they must, those routes do
not supersede routes of their master. This should generally be the
case, but unusual configurations or errant manual or automatic static
@ -2295,7 +2295,7 @@ active-backup:
the switches have an ISL and play together well. If the
network configuration is such that one switch is specifically
a backup switch (e.g., has lower capacity, higher cost, etc),
then the primary option can be used to insure that the
then the primary option can be used to ensure that the
preferred link is always used when it is available.
broadcast:
@ -2322,7 +2322,7 @@ monitor can provide a higher level of reliability in detecting end to
end connectivity failures (which may be caused by the failure of any
individual component to pass traffic for any reason). Additionally,
the ARP monitor should be configured with multiple targets (at least
one for each switch in the network). This will insure that,
one for each switch in the network). This will ensure that,
regardless of which switch is active, the ARP monitor has a suitable
target to query.