dt-bindings: slimbus: qcom,slim: convert to DT schema

Convert the Qualcomm SoC SLIMbus controller bindings to DT Schema.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20221118065246.6835-12-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Documentation/devicetree/bindings/slimbus/qcom,slim.yaml

@@ -0,0 +1,86 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/slimbus/qcom,slim.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SoC SLIMbus controller
+
+maintainers:
+  - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+  - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+
+description:
+  SLIMbus controller used when applications processor controls SLIMbus master
+  component.
+
+allOf:
+  - $ref: slimbus.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - qcom,apq8064-slim
+      - const: qcom,slim
+
+  reg:
+    items:
+      - description: Physical address of controller register blocks
+      - description: SLEW RATE register
+
+  reg-names:
+    items:
+      - const: ctrl
+      - const: slew
+
+  clocks:
+    items:
+      - description: Interface clock for this controller
+      - description: Interrupt for controller core's BAM
+
+  clock-names:
+    items:
+      - const: iface
+      - const: core
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - clocks
+  - clock-names
+  - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-msm8960.h>
+    #include <dt-bindings/clock/qcom,lcc-msm8960.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    soc {
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges;
+
+        slim@28080000 {
+            compatible = "qcom,apq8064-slim", "qcom,slim";
+            reg = <0x28080000 0x2000>, <0x80207c 4>;
+            reg-names = "ctrl", "slew";
+            interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&lcc SLIMBUS_SRC>, <&lcc AUDIO_SLIMBUS_CLK>;
+            clock-names = "iface", "core";
+            #address-cells = <2>;
+            #size-cells = <0>;
+
+            audio-codec@1,0 {
+                compatible = "slim217,60";
+                reg = <1 0>;
+            };
+        };
+    };

Documentation/devicetree/bindings/slimbus/slim-qcom-ctrl.txt

@@ -1,36 +0,0 @@
-Qualcomm SLIMbus controller
-This controller is used if applications processor driver controls SLIMbus
-master component.
-
-Required properties:
-
- - reg : Offset and length of the register region(s) for the device
- - reg-names : Register region name(s) referenced in reg above
-	 Required register resource entries are:
-	 "ctrl": Physical address of controller register blocks
- 	 "slew": required for "qcom,apq8064-slim" SOC.
- - compatible : should be "qcom,<SOC-NAME>-slim" for SOC specific compatible
- 		followed by "qcom,slim" for fallback.
- - interrupts : Interrupt number used by this controller
- - clocks : Interface and core clocks used by this SLIMbus controller
- - clock-names : Required clock-name entries are:
-	"iface" : Interface clock for this controller
-	"core" : Interrupt for controller core's BAM
-
-Example:
-
-	slim@28080000 {
-		compatible = "qcom,apq8064-slim", "qcom,slim";
-		reg = <0x28080000 0x2000>, <0x80207C 4>;
-		reg-names = "ctrl", "slew";
-		interrupts = <0 33 0>;
-		clocks = <&lcc SLIMBUS_SRC>, <&lcc AUDIO_SLIMBUS_CLK>;
-		clock-names = "iface", "core";
-		#address-cells = <2>;
-		#size-cell = <0>;
-
-		wcd9310: audio-codec@1,0{
-			compatible = "slim217,60";
-			reg = <1 0>;
-		};
-	};