Kernel/linux-next
1
0
Fork 0
mirror of https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git synced 2025-01-06 05:02:31 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity

i.MX fixes for 6.9:

Browse Source 
- A couple of i.MX7 board fixes from Fabio Estevam that use correct
   'no-mmc' property and pass 'link-frequencies' for OV2680.
 - A series from Frank Li to fix LPCG clock indices for i.MX8 subsystems.
 - A couple of changes from Tim Harvey that fix USB VBUS regulator for
   imx8mp-venice board.
 -----BEGIN PGP SIGNATURE-----
 
 iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAmYOakUUHHNoYXduZ3Vv
 QGtlcm5lbC5vcmcACgkQUFdYWoewfM6TJwf9FXjyq5/iqt84oXWhOcYN5GfxkJ6x
 7PoVEHk2YlGX1kyPLVZaQuHn9ABJdOvcALZKCjTJjresEkg61or1PCFUBE+rOqeb
 0U5u005M073EdkkRzn2Fn1mDqIhWxNfCJ5N4wigTz985PqjEe3evjjL/Y1T8MXOG
 Is4S+1g2imjwKJq6zLsre4QpO74Zi8cJHjoxPZMcmNIYoPHXoancNneuNQyTgGt4
 YBpo5W1LwUQMBo5rstNdjELwbI5xfxrXsVBuW4XqQGd39BPDkX+IqXFPUH6atuH5
 46v7atL+1vEiPWCkbxCE98/11VcW8UYh1njvdDP0O4bh66SEhjKHRm1NUw==
 =2zFX
 -----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmYVTs0ACgkQYKtH/8kJ
 Uid4Vw//Si4Cw7yk9xe4xFXI7pYf46Cpgmg4Q75F8x6mJvy0jtYqIOFhwJH5INFj
 Ry9EpvhYUkO7kGxe7OIE+m1hiY92Vcf9LFgnHkAaEed/gf47aTy+3Zougs9/ennN
 0JbdxROK3P2nBWCIiVxDKtykMy7k9ZJlEZqGaof5icWlNPrirXzg7MO1hv33dMyR
 fjQJKO2OOXNMUob6SJMJww7bkO5N5JjwsrD4U+FUOoPvbwfmWfI7bc5hMzmu89il
 IwMxOcXrgkkUmCSO5KfGxjBTfMwxTHwRyk82iGU2b1sEXuBNBbMCbWKd6r42C91n
 WF/4NFNIFdMawywa8bVAaHIrFw062vhXsgxruxUzKt1erwl7EwZa4sAPFGmtFQG+
 3Itlf/pMb693l4DQRTqs/Q9qJsz2+TaD+SixiQ888aNCb5iLavX8rD2MdERLeuHo
 nf64UGRjTlSw2y4ekBvwcsMHME1f76H3LY2ESW1oGlJj8q4tBML6jDqeIp4rC98K
 XqWy/9IAlHSWRcFc+U0ED8DGlLIvrrskoPZG3dpe7qb+l1roJowefqp0FzHno93K
 r7N2ZgEHPcb9qYbgvYJd4VYZ6A0ZqTyxq24naPhJdYWYJKnvvqOoN2h2Y6Ml9waZ
 I6mNDRQuJ210k8ile76Nnyu9BRRLqRDgExQ1ZZP9LeHjgg6eKbo=
 =6Ly1
 -----END PGP SIGNATURE-----

Merge tag 'imx-fixes-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes

i.MX fixes for 6.9:

- A couple of i.MX7 board fixes from Fabio Estevam that use correct
  'no-mmc' property and pass 'link-frequencies' for OV2680.
- A series from Frank Li to fix LPCG clock indices for i.MX8 subsystems.
- A couple of changes from Tim Harvey that fix USB VBUS regulator for
  imx8mp-venice board.

* tag 'imx-fixes-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  arm64: dts: imx8qm-ss-dma: fix can lpcg indices
  arm64: dts: imx8-ss-dma: fix can lpcg indices
  arm64: dts: imx8-ss-dma: fix adc lpcg indices
  arm64: dts: imx8-ss-dma: fix pwm lpcg indices
  arm64: dts: imx8-ss-dma: fix spi lpcg indices
  arm64: dts: imx8-ss-conn: fix usb lpcg indices
  arm64: dts: imx8-ss-lsio: fix pwm lpcg indices
  ARM: dts: imx7s-warp: Pass OV2680 link-frequencies
  ARM: dts: imx7-mba7: Use 'no-mmc' property
  arm64: dts: imx8-ss-conn: fix usdhc wrong lpcg clock order
  arm64: dts: freescale: imx8mp-venice-gw73xx-2x: fix USB vbus regulator
  arm64: dts: freescale: imx8mp-venice-gw72xx-2x: fix USB vbus regulator

Link: https://lore.kernel.org/r/Zg5rfaVVvD9egoBK@dragon
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This commit is contained in:
Arnd Bergmann 2024-04-09 16:21:01 +02:00
commit 7d177ae114
8 changed files with 44 additions and 43 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
arch/arm/boot/dts/nxp/imx/imx7-mba7.dtsi
View File

@ -666,7 +666,7 @@ &usdhc1 {
bus-width = <4>;
no-1-8-v;
no-sdio;
no-emmc;
no-mmc;
status = "okay";
};

1
arch/arm/boot/dts/nxp/imx/imx7s-warp.dts
View File

@ -210,6 +210,7 @@ ov2680_to_mipi: endpoint {
remote-endpoint = <&mipi_from_sensor>;
clock-lanes = <0>;
data-lanes = <1>;
link-frequencies = /bits/ 64 <330000000>;
};
};
};

16
arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi
View File

@ -41,7 +41,7 @@ usbotg1: usb@5b0d0000 {
interrupts = <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>;
fsl,usbphy = <&usbphy1>;
fsl,usbmisc = <&usbmisc1 0>;
clocks = <&usb2_lpcg 0>;
clocks = <&usb2_lpcg IMX_LPCG_CLK_6>;
ahb-burst-config = <0x0>;
tx-burst-size-dword = <0x10>;
rx-burst-size-dword = <0x10>;
@ -58,7 +58,7 @@ usbmisc1: usbmisc@5b0d0200 {
usbphy1: usbphy@5b100000 {
compatible = "fsl,imx7ulp-usbphy";
reg = <0x5b100000 0x1000>;
clocks = <&usb2_lpcg 1>;
clocks = <&usb2_lpcg IMX_LPCG_CLK_7>;
power-domains = <&pd IMX_SC_R_USB_0_PHY>;
status = "disabled";
};
@ -67,8 +67,8 @@ usdhc1: mmc@5b010000 {
interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x5b010000 0x10000>;
clocks = <&sdhc0_lpcg IMX_LPCG_CLK_4>,
<&sdhc0_lpcg IMX_LPCG_CLK_0>,
<&sdhc0_lpcg IMX_LPCG_CLK_5>;
<&sdhc0_lpcg IMX_LPCG_CLK_5>,
<&sdhc0_lpcg IMX_LPCG_CLK_0>;
clock-names = "ipg", "ahb", "per";
power-domains = <&pd IMX_SC_R_SDHC_0>;
status = "disabled";
@ -78,8 +78,8 @@ usdhc2: mmc@5b020000 {
interrupts = <GIC_SPI 233 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x5b020000 0x10000>;
clocks = <&sdhc1_lpcg IMX_LPCG_CLK_4>,
<&sdhc1_lpcg IMX_LPCG_CLK_0>,
<&sdhc1_lpcg IMX_LPCG_CLK_5>;
<&sdhc1_lpcg IMX_LPCG_CLK_5>,
<&sdhc1_lpcg IMX_LPCG_CLK_0>;
clock-names = "ipg", "ahb", "per";
power-domains = <&pd IMX_SC_R_SDHC_1>;
fsl,tuning-start-tap = <20>;
@ -91,8 +91,8 @@ usdhc3: mmc@5b030000 {
interrupts = <GIC_SPI 234 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x5b030000 0x10000>;
clocks = <&sdhc2_lpcg IMX_LPCG_CLK_4>,
<&sdhc2_lpcg IMX_LPCG_CLK_0>,
<&sdhc2_lpcg IMX_LPCG_CLK_5>;
<&sdhc2_lpcg IMX_LPCG_CLK_5>,
<&sdhc2_lpcg IMX_LPCG_CLK_0>;
clock-names = "ipg", "ahb", "per";
power-domains = <&pd IMX_SC_R_SDHC_2>;
status = "disabled";

40
arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi
View File

@ -28,8 +28,8 @@ lpspi0: spi@5a000000 {
#size-cells = <0>;
interrupts = <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>;
interrupt-parent = <&gic>;
clocks = <&spi0_lpcg 0>,
<&spi0_lpcg 1>;
clocks = <&spi0_lpcg IMX_LPCG_CLK_0>,
<&spi0_lpcg IMX_LPCG_CLK_4>;
clock-names = "per", "ipg";
assigned-clocks = <&clk IMX_SC_R_SPI_0 IMX_SC_PM_CLK_PER>;
assigned-clock-rates = <60000000>;
@ -44,8 +44,8 @@ lpspi1: spi@5a010000 {
#size-cells = <0>;
interrupts = <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>;
interrupt-parent = <&gic>;
clocks = <&spi1_lpcg 0>,
<&spi1_lpcg 1>;
clocks = <&spi1_lpcg IMX_LPCG_CLK_0>,
<&spi1_lpcg IMX_LPCG_CLK_4>;
clock-names = "per", "ipg";
assigned-clocks = <&clk IMX_SC_R_SPI_1 IMX_SC_PM_CLK_PER>;
assigned-clock-rates = <60000000>;
@ -60,8 +60,8 @@ lpspi2: spi@5a020000 {
#size-cells = <0>;
interrupts = <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>;
interrupt-parent = <&gic>;
clocks = <&spi2_lpcg 0>,
<&spi2_lpcg 1>;
clocks = <&spi2_lpcg IMX_LPCG_CLK_0>,
<&spi2_lpcg IMX_LPCG_CLK_4>;
clock-names = "per", "ipg";
assigned-clocks = <&clk IMX_SC_R_SPI_2 IMX_SC_PM_CLK_PER>;
assigned-clock-rates = <60000000>;
@ -76,8 +76,8 @@ lpspi3: spi@5a030000 {
#size-cells = <0>;
interrupts = <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>;
interrupt-parent = <&gic>;
clocks = <&spi3_lpcg 0>,
<&spi3_lpcg 1>;
clocks = <&spi3_lpcg IMX_LPCG_CLK_0>,
<&spi3_lpcg IMX_LPCG_CLK_4>;
clock-names = "per", "ipg";
assigned-clocks = <&clk IMX_SC_R_SPI_3 IMX_SC_PM_CLK_PER>;
assigned-clock-rates = <60000000>;
@ -145,8 +145,8 @@ adma_pwm: pwm@5a190000 {
compatible = "fsl,imx8qxp-pwm", "fsl,imx27-pwm";
reg = <0x5a190000 0x1000>;
interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&adma_pwm_lpcg 1>,
<&adma_pwm_lpcg 0>;
clocks = <&adma_pwm_lpcg IMX_LPCG_CLK_4>,
<&adma_pwm_lpcg IMX_LPCG_CLK_0>;
clock-names = "ipg", "per";
assigned-clocks = <&clk IMX_SC_R_LCD_0_PWM_0 IMX_SC_PM_CLK_PER>;
assigned-clock-rates = <24000000>;
@ -355,8 +355,8 @@ adc0: adc@5a880000 {
reg = <0x5a880000 0x10000>;
interrupts = <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>;
interrupt-parent = <&gic>;
clocks = <&adc0_lpcg 0>,
<&adc0_lpcg 1>;
clocks = <&adc0_lpcg IMX_LPCG_CLK_0>,
<&adc0_lpcg IMX_LPCG_CLK_4>;
clock-names = "per", "ipg";
assigned-clocks = <&clk IMX_SC_R_ADC_0 IMX_SC_PM_CLK_PER>;
assigned-clock-rates = <24000000>;
@ -370,8 +370,8 @@ adc1: adc@5a890000 {
reg = <0x5a890000 0x10000>;
interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>;
interrupt-parent = <&gic>;
clocks = <&adc1_lpcg 0>,
<&adc1_lpcg 1>;
clocks = <&adc1_lpcg IMX_LPCG_CLK_0>,
<&adc1_lpcg IMX_LPCG_CLK_4>;
clock-names = "per", "ipg";
assigned-clocks = <&clk IMX_SC_R_ADC_1 IMX_SC_PM_CLK_PER>;
assigned-clock-rates = <24000000>;
@ -384,8 +384,8 @@ flexcan1: can@5a8d0000 {
reg = <0x5a8d0000 0x10000>;
interrupts = <GIC_SPI 235 IRQ_TYPE_LEVEL_HIGH>;
interrupt-parent = <&gic>;
clocks = <&can0_lpcg 1>,
<&can0_lpcg 0>;
clocks = <&can0_lpcg IMX_LPCG_CLK_4>,
<&can0_lpcg IMX_LPCG_CLK_0>;
clock-names = "ipg", "per";
assigned-clocks = <&clk IMX_SC_R_CAN_0 IMX_SC_PM_CLK_PER>;
assigned-clock-rates = <40000000>;
@ -405,8 +405,8 @@ flexcan2: can@5a8e0000 {
* CAN1 shares CAN0's clock and to enable CAN0's clock it
* has to be powered on.
*/
clocks = <&can0_lpcg 1>,
<&can0_lpcg 0>;
clocks = <&can0_lpcg IMX_LPCG_CLK_4>,
<&can0_lpcg IMX_LPCG_CLK_0>;
clock-names = "ipg", "per";
assigned-clocks = <&clk IMX_SC_R_CAN_0 IMX_SC_PM_CLK_PER>;
assigned-clock-rates = <40000000>;
@ -426,8 +426,8 @@ flexcan3: can@5a8f0000 {
* CAN2 shares CAN0's clock and to enable CAN0's clock it
* has to be powered on.
*/
clocks = <&can0_lpcg 1>,
<&can0_lpcg 0>;
clocks = <&can0_lpcg IMX_LPCG_CLK_4>,
<&can0_lpcg IMX_LPCG_CLK_0>;
clock-names = "ipg", "per";
assigned-clocks = <&clk IMX_SC_R_CAN_0 IMX_SC_PM_CLK_PER>;
assigned-clock-rates = <40000000>;

16
arch/arm64/boot/dts/freescale/imx8-ss-lsio.dtsi
View File

@ -25,8 +25,8 @@ lsio_pwm0: pwm@5d000000 {
compatible = "fsl,imx27-pwm";
reg = <0x5d000000 0x10000>;
clock-names = "ipg", "per";
clocks = <&pwm0_lpcg 4>,
<&pwm0_lpcg 1>;
clocks = <&pwm0_lpcg IMX_LPCG_CLK_6>,
<&pwm0_lpcg IMX_LPCG_CLK_1>;
assigned-clocks = <&clk IMX_SC_R_PWM_0 IMX_SC_PM_CLK_PER>;
assigned-clock-rates = <24000000>;
#pwm-cells = <3>;
@ -38,8 +38,8 @@ lsio_pwm1: pwm@5d010000 {
compatible = "fsl,imx27-pwm";
reg = <0x5d010000 0x10000>;
clock-names = "ipg", "per";
clocks = <&pwm1_lpcg 4>,
<&pwm1_lpcg 1>;
clocks = <&pwm1_lpcg IMX_LPCG_CLK_6>,
<&pwm1_lpcg IMX_LPCG_CLK_1>;
assigned-clocks = <&clk IMX_SC_R_PWM_1 IMX_SC_PM_CLK_PER>;
assigned-clock-rates = <24000000>;
#pwm-cells = <3>;
@ -51,8 +51,8 @@ lsio_pwm2: pwm@5d020000 {
compatible = "fsl,imx27-pwm";
reg = <0x5d020000 0x10000>;
clock-names = "ipg", "per";
clocks = <&pwm2_lpcg 4>,
<&pwm2_lpcg 1>;
clocks = <&pwm2_lpcg IMX_LPCG_CLK_6>,
<&pwm2_lpcg IMX_LPCG_CLK_1>;
assigned-clocks = <&clk IMX_SC_R_PWM_2 IMX_SC_PM_CLK_PER>;
assigned-clock-rates = <24000000>;
#pwm-cells = <3>;
@ -64,8 +64,8 @@ lsio_pwm3: pwm@5d030000 {
compatible = "fsl,imx27-pwm";
reg = <0x5d030000 0x10000>;
clock-names = "ipg", "per";
clocks = <&pwm3_lpcg 4>,
<&pwm3_lpcg 1>;
clocks = <&pwm3_lpcg IMX_LPCG_CLK_6>,
<&pwm3_lpcg IMX_LPCG_CLK_1>;
assigned-clocks = <&clk IMX_SC_R_PWM_3 IMX_SC_PM_CLK_PER>;
assigned-clock-rates = <24000000>;
#pwm-cells = <3>;

2
arch/arm64/boot/dts/freescale/imx8mp-venice-gw72xx.dtsi
View File

@ -14,6 +14,7 @@ connector {
pinctrl-0 = <&pinctrl_usbcon1>;
type = "micro";
label = "otg";
vbus-supply = <&reg_usb1_vbus>;
id-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
port {
@ -183,7 +184,6 @@ &usb3_0 {
};
&usb3_phy0 {
vbus-supply = <&reg_usb1_vbus>;
status = "okay";
};

2
arch/arm64/boot/dts/freescale/imx8mp-venice-gw73xx.dtsi
View File

@ -14,6 +14,7 @@ connector {
pinctrl-0 = <&pinctrl_usbcon1>;
type = "micro";
label = "otg";
vbus-supply = <&reg_usb1_vbus>;
id-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
port {
@ -202,7 +203,6 @@ &usb3_0 {
};
&usb3_phy0 {
vbus-supply = <&reg_usb1_vbus>;
status = "okay";
};

8
arch/arm64/boot/dts/freescale/imx8qm-ss-dma.dtsi
View File

@ -153,15 +153,15 @@ &flexcan1 {
};
&flexcan2 {
clocks = <&can1_lpcg 1>,
<&can1_lpcg 0>;
clocks = <&can1_lpcg IMX_LPCG_CLK_4>,
<&can1_lpcg IMX_LPCG_CLK_0>;
assigned-clocks = <&clk IMX_SC_R_CAN_1 IMX_SC_PM_CLK_PER>;
fsl,clk-source = /bits/ 8 <1>;
};
&flexcan3 {
clocks = <&can2_lpcg 1>,
<&can2_lpcg 0>;
clocks = <&can2_lpcg IMX_LPCG_CLK_4>,
<&can2_lpcg IMX_LPCG_CLK_0>;
assigned-clocks = <&clk IMX_SC_R_CAN_2 IMX_SC_PM_CLK_PER>;
fsl,clk-source = /bits/ 8 <1>;
};