dt-bindings: gpio: gpio-delay: Spelling s/curcuit/circuit/

Fix misspellings of "circuit".

Fixes: c7239a3da1 ("dt-bindings: gpio: Add gpio-delay binding document")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
This commit is contained in:
Geert Uytterhoeven 2023-06-06 12:01:40 +02:00 committed by Bartosz Golaszewski
parent 7ce8d39e34
commit ba65c79fbb

View File

@ -11,7 +11,7 @@ maintainers:
description: |
This binding describes an electrical setup where setting an GPIO output
is delayed by some external setup, e.g. RC curcuit.
is delayed by some external setup, e.g. RC circuit.
+----------+ +-----------+
| | VCC_B | |
@ -30,7 +30,7 @@ description: |
GND
If the input on the consumer is controlled by an open-drain signal
attached to an RC curcuit the ramp-up delay is not under control
attached to an RC circuit the ramp-up delay is not under control
of the GPIO controller.
properties: