Merge branch 'omap/cleanup-prcm-part2' into next/dt

This resolves a nontrivial conflict where the omap_prcm_restart
is removed in one branch but another use is added in another
branch.

Conflicts:
	arch/arm/mach-omap2/cm33xx.c
	arch/arm/mach-omap2/io.c
	arch/arm/mach-omap2/prm_common.c

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

arch/arm/mach-omap1/common.h

@@ -93,4 +93,6 @@ extern int ocpi_enable(void);
 static inline int ocpi_enable(void) { return 0; }
 #endif
 
+extern u32 omap1_get_reset_sources(void);
+
 #endif /* __ARCH_ARM_MACH_OMAP1_COMMON_H */

arch/arm/mach-omap1/devices.c

@@ -17,6 +17,8 @@
 #include <linux/platform_device.h>
 #include <linux/spi/spi.h>
 
+#include <linux/platform_data/omap-wd-timer.h>
+
 #include <asm/mach/map.h>
 
 #include <mach/tc.h>
@@ -447,18 +449,31 @@ static struct resource wdt_resources[] = {
 };
 
 static struct platform_device omap_wdt_device = {
-	.name	   = "omap_wdt",
-	.id	     = -1,
+	.name		= "omap_wdt",
+	.id		= -1,
 	.num_resources	= ARRAY_SIZE(wdt_resources),
 	.resource	= wdt_resources,
 };
 
 static int __init omap_init_wdt(void)
 {
+	struct omap_wd_timer_platform_data pdata;
+	int ret;
+
 	if (!cpu_is_omap16xx())
 		return -ENODEV;
 
-	return platform_device_register(&omap_wdt_device);
+	pdata.read_reset_sources = omap1_get_reset_sources;
+
+	ret = platform_device_register(&omap_wdt_device);
+	if (!ret) {
+		ret = platform_device_add_data(&omap_wdt_device, &pdata,
+					       sizeof(pdata));
+		if (ret)
+			platform_device_del(&omap_wdt_device);
+	}
+
+	return ret;
 }
 subsys_initcall(omap_init_wdt);
 #endif

arch/arm/mach-omap1/reset.c

@@ -4,12 +4,24 @@
 #include <linux/kernel.h>
 #include <linux/io.h>
 
-#include <plat/prcm.h>
-
 #include <mach/hardware.h>
 
+#include "iomap.h"
 #include "common.h"
 
+/* ARM_SYSST bit shifts related to SoC reset sources */
+#define ARM_SYSST_POR_SHIFT				5
+#define ARM_SYSST_EXT_RST_SHIFT				4
+#define ARM_SYSST_ARM_WDRST_SHIFT			2
+#define ARM_SYSST_GLOB_SWRST_SHIFT			1
+
+/* Standardized reset source bits (across all OMAP SoCs) */
+#define OMAP_GLOBAL_COLD_RST_SRC_ID_SHIFT		0
+#define OMAP_GLOBAL_WARM_RST_SRC_ID_SHIFT		1
+#define OMAP_MPU_WD_RST_SRC_ID_SHIFT			3
+#define OMAP_EXTWARM_RST_SRC_ID_SHIFT			5
+
+
 void omap1_restart(char mode, const char *cmd)
 {
 	/*
@@ -23,3 +35,28 @@ void omap1_restart(char mode, const char *cmd)
 
 	omap_writew(1, ARM_RSTCT1);
 }
+
+/**
+ * omap1_get_reset_sources - return the source of the SoC's last reset
+ *
+ * Returns bits that represent the last reset source for the SoC.  The
+ * format is standardized across OMAPs for use by the OMAP watchdog.
+ */
+u32 omap1_get_reset_sources(void)
+{
+	u32 ret = 0;
+	u16 rs;
+
+	rs = __raw_readw(OMAP1_IO_ADDRESS(ARM_SYSST));
+
+	if (rs & (1 << ARM_SYSST_POR_SHIFT))
+		ret |= 1 << OMAP_GLOBAL_COLD_RST_SRC_ID_SHIFT;
+	if (rs & (1 << ARM_SYSST_EXT_RST_SHIFT))
+		ret |= 1 << OMAP_EXTWARM_RST_SRC_ID_SHIFT;
+	if (rs & (1 << ARM_SYSST_ARM_WDRST_SHIFT))
+		ret |= 1 << OMAP_MPU_WD_RST_SRC_ID_SHIFT;
+	if (rs & (1 << ARM_SYSST_GLOB_SWRST_SHIFT))
+		ret |= 1 << OMAP_GLOBAL_WARM_RST_SRC_ID_SHIFT;
+
+	return ret;
+}

arch/arm/mach-omap2/Makefile

@@ -7,28 +7,34 @@ obj-y := id.o io.o control.o mux.o devices.o serial.o gpmc.o timer.o pm.o \
 	 common.o gpio.o dma.o wd_timer.o display.o i2c.o hdq1w.o omap_hwmod.o \
 	 omap_device.o sram.o
 
-# INTCPS IP block support - XXX should be moved to drivers/
-obj-$(CONFIG_ARCH_OMAP2)		+= irq.o
-obj-$(CONFIG_ARCH_OMAP3)		+= irq.o
-obj-$(CONFIG_SOC_AM33XX)		+= irq.o
+omap-2-3-common				= irq.o
+hwmod-common				= omap_hwmod.o \
+					  omap_hwmod_common_data.o
+clock-common				= clock.o clock_common_data.o \
+					  clkt_dpll.o clkt_clksel.o
+secure-common				= omap-smc.o omap-secure.o
 
-# Secure monitor API support
-obj-$(CONFIG_ARCH_OMAP3)		+= omap-smc.o omap-secure.o
-obj-$(CONFIG_ARCH_OMAP4)		+= omap-smc.o omap-secure.o
-obj-$(CONFIG_SOC_OMAP5)			+= omap-smc.o omap-secure.o
+obj-$(CONFIG_ARCH_OMAP2) += $(omap-2-3-common) $(hwmod-common)
+obj-$(CONFIG_ARCH_OMAP3) += $(omap-2-3-common) $(hwmod-common) $(secure-common)
+obj-$(CONFIG_ARCH_OMAP4) += prm44xx.o $(hwmod-common) $(secure-common)
+obj-$(CONFIG_SOC_AM33XX) += irq.o $(hwmod-common)
+obj-$(CONFIG_SOC_OMAP5)	 += prm44xx.o $(hwmod-common) $(secure-common)
 
 ifneq ($(CONFIG_SND_OMAP_SOC_MCBSP),)
 obj-y += mcbsp.o
 endif
 
-obj-$(CONFIG_TWL4030_CORE)		+= omap_twl.o
+obj-$(CONFIG_TWL4030_CORE) += omap_twl.o
+obj-$(CONFIG_SOC_HAS_OMAP2_SDRC)	+= sdrc.o
 
 # SMP support ONLY available for OMAP4
 
 obj-$(CONFIG_SMP)			+= omap-smp.o omap-headsmp.o
 obj-$(CONFIG_HOTPLUG_CPU)		+= omap-hotplug.o
-obj-$(CONFIG_ARCH_OMAP4)		+= omap4-common.o omap-wakeupgen.o
-obj-$(CONFIG_SOC_OMAP5)			+= omap4-common.o omap-wakeupgen.o
+omap-4-5-common				=  omap4-common.o omap-wakeupgen.o \
+					   sleep44xx.o
+obj-$(CONFIG_ARCH_OMAP4)		+= $(omap-4-5-common)
+obj-$(CONFIG_SOC_OMAP5)			+= $(omap-4-5-common)
 
 plus_sec := $(call as-instr,.arch_extension sec,+sec)
 AFLAGS_omap-headsmp.o			:=-Wa,-march=armv7-a$(plus_sec)
@@ -44,6 +50,11 @@ AFLAGS_sram242x.o			:=-Wa,-march=armv6
 AFLAGS_sram243x.o			:=-Wa,-march=armv6
 AFLAGS_sram34xx.o			:=-Wa,-march=armv7-a
 
+# Restart code (OMAP4/5 currently in omap4-common.c)
+obj-$(CONFIG_SOC_OMAP2420)		+= omap2-restart.o
+obj-$(CONFIG_SOC_OMAP2430)		+= omap2-restart.o
+obj-$(CONFIG_ARCH_OMAP3)		+= omap3-restart.o
+
 # Pin multiplexing
 obj-$(CONFIG_SOC_OMAP2420)		+= mux2420.o
 obj-$(CONFIG_SOC_OMAP2430)		+= mux2430.o
@@ -53,7 +64,6 @@ obj-$(CONFIG_ARCH_OMAP4)		+= mux44xx.o
 # SMS/SDRC
 obj-$(CONFIG_ARCH_OMAP2)		+= sdrc2xxx.o
 # obj-$(CONFIG_ARCH_OMAP3)		+= sdrc3xxx.o
-obj-$(CONFIG_SOC_HAS_OMAP2_SDRC)	+= sdrc.o
 
 # OPP table initialization
 ifeq ($(CONFIG_PM_OPP),y)
@@ -64,16 +74,16 @@ endif
 
 # Power Management
 ifeq ($(CONFIG_PM),y)
-obj-$(CONFIG_ARCH_OMAP2)		+= pm24xx.o sleep24xx.o
+obj-$(CONFIG_ARCH_OMAP2)		+= pm24xx.o
+obj-$(CONFIG_ARCH_OMAP2)		+= sleep24xx.o
 obj-$(CONFIG_ARCH_OMAP3)		+= pm34xx.o sleep34xx.o
 obj-$(CONFIG_ARCH_OMAP4)		+= pm44xx.o omap-mpuss-lowpower.o
-obj-$(CONFIG_ARCH_OMAP4)		+= sleep44xx.o
-obj-$(CONFIG_SOC_OMAP5)			+= omap-mpuss-lowpower.o sleep44xx.o
+obj-$(CONFIG_SOC_OMAP5)			+= omap-mpuss-lowpower.o
 obj-$(CONFIG_PM_DEBUG)			+= pm-debug.o
 obj-$(CONFIG_OMAP_PM_NOOP)		+= omap-pm-noop.o
 
 obj-$(CONFIG_POWER_AVS_OMAP)		+= sr_device.o
-obj-$(CONFIG_POWER_AVS_OMAP_CLASS3)	+= smartreflex-class3.o
+obj-$(CONFIG_POWER_AVS_OMAP_CLASS3)    += smartreflex-class3.o
 
 AFLAGS_sleep24xx.o			:=-Wa,-march=armv6
 AFLAGS_sleep34xx.o			:=-Wa,-march=armv7-a$(plus_sec)
@@ -85,76 +95,82 @@ endif
 endif
 
 ifeq ($(CONFIG_CPU_IDLE),y)
-obj-$(CONFIG_ARCH_OMAP3)		+= cpuidle34xx.o
-obj-$(CONFIG_ARCH_OMAP4)		+= cpuidle44xx.o
+obj-$(CONFIG_ARCH_OMAP3)                += cpuidle34xx.o
+obj-$(CONFIG_ARCH_OMAP4)                += cpuidle44xx.o
 endif
 
 # PRCM
-obj-y					+= prcm.o prm_common.o
-obj-$(CONFIG_ARCH_OMAP2)		+= cm2xxx_3xxx.o prm2xxx_3xxx.o
-obj-$(CONFIG_ARCH_OMAP3)		+= cm2xxx_3xxx.o prm2xxx_3xxx.o
+obj-y					+= prm_common.o cm_common.o
+obj-$(CONFIG_ARCH_OMAP2)		+= prm2xxx_3xxx.o prm2xxx.o cm2xxx.o
+obj-$(CONFIG_ARCH_OMAP3)		+= prm2xxx_3xxx.o prm3xxx.o cm3xxx.o
 obj-$(CONFIG_ARCH_OMAP3)		+= vc3xxx_data.o vp3xxx_data.o
 obj-$(CONFIG_SOC_AM33XX)		+= prm33xx.o cm33xx.o
 omap-prcm-4-5-common			=  cminst44xx.o cm44xx.o prm44xx.o \
 					   prcm_mpu44xx.o prminst44xx.o \
-					   vc44xx_data.o vp44xx_data.o \
-					   prm44xx.o
+					   vc44xx_data.o vp44xx_data.o
 obj-$(CONFIG_ARCH_OMAP4)		+= $(omap-prcm-4-5-common)
 obj-$(CONFIG_SOC_OMAP5)			+= $(omap-prcm-4-5-common)
 
 # OMAP voltage domains
-obj-y					+= voltage.o vc.o vp.o
+voltagedomain-common			:= voltage.o vc.o vp.o
+obj-$(CONFIG_ARCH_OMAP2)		+= $(voltagedomain-common)
 obj-$(CONFIG_ARCH_OMAP2)		+= voltagedomains2xxx_data.o
+obj-$(CONFIG_ARCH_OMAP3)		+= $(voltagedomain-common)
 obj-$(CONFIG_ARCH_OMAP3)		+= voltagedomains3xxx_data.o
+obj-$(CONFIG_ARCH_OMAP4)		+= $(voltagedomain-common)
 obj-$(CONFIG_ARCH_OMAP4)		+= voltagedomains44xx_data.o
-obj-$(CONFIG_SOC_AM33XX)		+= voltagedomains33xx_data.o
+obj-$(CONFIG_SOC_AM33XX)		+= $(voltagedomain-common)
+obj-$(CONFIG_SOC_AM33XX)                += voltagedomains33xx_data.o
+obj-$(CONFIG_SOC_OMAP5)			+= $(voltagedomain-common)
 
 # OMAP powerdomain framework
-obj-y					+= powerdomain.o powerdomain-common.o
+powerdomain-common			+= powerdomain.o powerdomain-common.o
+obj-$(CONFIG_ARCH_OMAP2)		+= $(powerdomain-common)
 obj-$(CONFIG_ARCH_OMAP2)		+= powerdomains2xxx_data.o
-obj-$(CONFIG_ARCH_OMAP2)		+= powerdomain2xxx_3xxx.o
 obj-$(CONFIG_ARCH_OMAP2)		+= powerdomains2xxx_3xxx_data.o
-obj-$(CONFIG_ARCH_OMAP3)		+= powerdomain2xxx_3xxx.o
+obj-$(CONFIG_ARCH_OMAP3)		+= $(powerdomain-common)
 obj-$(CONFIG_ARCH_OMAP3)		+= powerdomains3xxx_data.o
 obj-$(CONFIG_ARCH_OMAP3)		+= powerdomains2xxx_3xxx_data.o
-obj-$(CONFIG_ARCH_OMAP4)		+= powerdomain44xx.o
+obj-$(CONFIG_ARCH_OMAP4)		+= $(powerdomain-common)
 obj-$(CONFIG_ARCH_OMAP4)		+= powerdomains44xx_data.o
-obj-$(CONFIG_SOC_AM33XX)		+= powerdomain33xx.o
+obj-$(CONFIG_SOC_AM33XX)		+= $(powerdomain-common)
 obj-$(CONFIG_SOC_AM33XX)		+= powerdomains33xx_data.o
-obj-$(CONFIG_SOC_OMAP5)			+= powerdomain44xx.o
+obj-$(CONFIG_SOC_OMAP5)			+= $(powerdomain-common)
 
 # PRCM clockdomain control
-obj-y					+= clockdomain.o
-obj-$(CONFIG_ARCH_OMAP2)		+= clockdomain2xxx_3xxx.o
+clockdomain-common			+= clockdomain.o
+obj-$(CONFIG_ARCH_OMAP2)		+= $(clockdomain-common)
 obj-$(CONFIG_ARCH_OMAP2)		+= clockdomains2xxx_3xxx_data.o
 obj-$(CONFIG_SOC_OMAP2420)		+= clockdomains2420_data.o
 obj-$(CONFIG_SOC_OMAP2430)		+= clockdomains2430_data.o
-obj-$(CONFIG_ARCH_OMAP3)		+= clockdomain2xxx_3xxx.o
+obj-$(CONFIG_ARCH_OMAP3)		+= $(clockdomain-common)
 obj-$(CONFIG_ARCH_OMAP3)		+= clockdomains2xxx_3xxx_data.o
 obj-$(CONFIG_ARCH_OMAP3)		+= clockdomains3xxx_data.o
-obj-$(CONFIG_ARCH_OMAP4)		+= clockdomain44xx.o
+obj-$(CONFIG_ARCH_OMAP4)		+= $(clockdomain-common)
 obj-$(CONFIG_ARCH_OMAP4)		+= clockdomains44xx_data.o
-obj-$(CONFIG_SOC_AM33XX)		+= clockdomain33xx.o
+obj-$(CONFIG_SOC_AM33XX)		+= $(clockdomain-common)
 obj-$(CONFIG_SOC_AM33XX)		+= clockdomains33xx_data.o
-obj-$(CONFIG_SOC_OMAP5)			+= clockdomain44xx.o
+obj-$(CONFIG_SOC_OMAP5)			+= $(clockdomain-common)
 
 # Clock framework
-obj-y					+= clock.o clock_common_data.o \
-					   clkt_dpll.o clkt_clksel.o
-obj-$(CONFIG_ARCH_OMAP2)		+= clock2xxx.o
-obj-$(CONFIG_ARCH_OMAP2)		+= clkt2xxx_dpllcore.o clkt2xxx_sys.o
+obj-$(CONFIG_ARCH_OMAP2)		+= $(clock-common) clock2xxx.o
+obj-$(CONFIG_ARCH_OMAP2)		+= clkt2xxx_sys.o
+obj-$(CONFIG_ARCH_OMAP2)		+= clkt2xxx_dpllcore.o
 obj-$(CONFIG_ARCH_OMAP2)		+= clkt2xxx_virt_prcm_set.o
 obj-$(CONFIG_ARCH_OMAP2)		+= clkt2xxx_apll.o clkt2xxx_osc.o
 obj-$(CONFIG_ARCH_OMAP2)		+= clkt2xxx_dpll.o clkt_iclk.o
 obj-$(CONFIG_SOC_OMAP2420)		+= clock2420_data.o
 obj-$(CONFIG_SOC_OMAP2430)		+= clock2430.o clock2430_data.o
-obj-$(CONFIG_ARCH_OMAP3)		+= clock3xxx.o
+obj-$(CONFIG_ARCH_OMAP3)		+= $(clock-common) clock3xxx.o
 obj-$(CONFIG_ARCH_OMAP3)		+= clock34xx.o clkt34xx_dpll3m2.o
-obj-$(CONFIG_ARCH_OMAP3)		+= clock3517.o clock36xx.o clkt_iclk.o
+obj-$(CONFIG_ARCH_OMAP3)		+= clock3517.o clock36xx.o
 obj-$(CONFIG_ARCH_OMAP3)		+= dpll3xxx.o clock3xxx_data.o
-obj-$(CONFIG_ARCH_OMAP4)		+= clock44xx_data.o
+obj-$(CONFIG_ARCH_OMAP3)		+= clkt_iclk.o
+obj-$(CONFIG_ARCH_OMAP4)		+= $(clock-common) clock44xx_data.o
 obj-$(CONFIG_ARCH_OMAP4)		+= dpll3xxx.o dpll44xx.o
-obj-$(CONFIG_SOC_AM33XX)		+= dpll3xxx.o clock33xx_data.o
+obj-$(CONFIG_SOC_AM33XX)		+= $(clock-common) dpll3xxx.o
+obj-$(CONFIG_SOC_AM33XX)		+= clock33xx_data.o
+obj-$(CONFIG_SOC_OMAP5)			+= $(clock-common)
 obj-$(CONFIG_SOC_OMAP5)			+= dpll3xxx.o dpll44xx.o
 
 # OMAP2 clock rate set data (old "OPP" data)
@@ -162,7 +178,6 @@ obj-$(CONFIG_SOC_OMAP2420)		+= opp2420_data.o
 obj-$(CONFIG_SOC_OMAP2430)		+= opp2430_data.o
 
 # hwmod data
-obj-y					+= omap_hwmod_common_data.o
 obj-$(CONFIG_SOC_OMAP2420)		+= omap_hwmod_2xxx_ipblock_data.o
 obj-$(CONFIG_SOC_OMAP2420)		+= omap_hwmod_2xxx_3xxx_ipblock_data.o
 obj-$(CONFIG_SOC_OMAP2420)		+= omap_hwmod_2xxx_interconnect_data.o
@@ -208,10 +223,10 @@ obj-$(CONFIG_MACH_OMAP_H4)		+= board-h4.o
 obj-$(CONFIG_MACH_OMAP_2430SDP)		+= board-2430sdp.o
 obj-$(CONFIG_MACH_OMAP_APOLLON)		+= board-apollon.o
 obj-$(CONFIG_MACH_OMAP3_BEAGLE)		+= board-omap3beagle.o
-obj-$(CONFIG_MACH_DEVKIT8000)		+= board-devkit8000.o
+obj-$(CONFIG_MACH_DEVKIT8000)     	+= board-devkit8000.o
 obj-$(CONFIG_MACH_OMAP_LDP)		+= board-ldp.o
-obj-$(CONFIG_MACH_OMAP3530_LV_SOM)	+= board-omap3logic.o
-obj-$(CONFIG_MACH_OMAP3_TORPEDO)	+= board-omap3logic.o
+obj-$(CONFIG_MACH_OMAP3530_LV_SOM)      += board-omap3logic.o
+obj-$(CONFIG_MACH_OMAP3_TORPEDO)        += board-omap3logic.o
 obj-$(CONFIG_MACH_ENCORE)		+= board-omap3encore.o
 obj-$(CONFIG_MACH_OVERO)		+= board-overo.o
 obj-$(CONFIG_MACH_OMAP3EVM)		+= board-omap3evm.o

arch/arm/mach-omap2/am33xx.h

@@ -21,5 +21,6 @@
 #define AM33XX_SCM_BASE		0x44E10000
 #define AM33XX_CTRL_BASE	AM33XX_SCM_BASE
 #define AM33XX_PRCM_BASE	0x44E00000
+#define AM33XX_TAP_BASE		(AM33XX_CTRL_BASE + 0x3FC)
 
 #endif /* __ASM_ARCH_AM33XX_H */

arch/arm/mach-omap2/board-2430sdp.c

@@ -285,5 +285,5 @@ MACHINE_START(OMAP_2430SDP, "OMAP2430 sdp2430 board")
 	.init_machine	= omap_2430sdp_init,
 	.init_late	= omap2430_init_late,
 	.timer		= &omap2_timer,
-	.restart	= omap_prcm_restart,
+	.restart	= omap2xxx_restart,
 MACHINE_END

arch/arm/mach-omap2/board-3430sdp.c

@@ -597,5 +597,5 @@ MACHINE_START(OMAP_3430SDP, "OMAP3430 3430SDP board")
 	.init_machine	= omap_3430sdp_init,
 	.init_late	= omap3430_init_late,
 	.timer		= &omap3_timer,
-	.restart	= omap_prcm_restart,
+	.restart	= omap3xxx_restart,
 MACHINE_END

arch/arm/mach-omap2/board-3630sdp.c

@@ -212,5 +212,5 @@ MACHINE_START(OMAP_3630SDP, "OMAP 3630SDP board")
 	.init_machine	= omap_sdp_init,
 	.init_late	= omap3630_init_late,
 	.timer		= &omap3_timer,
-	.restart	= omap_prcm_restart,
+	.restart	= omap3xxx_restart,
 MACHINE_END

arch/arm/mach-omap2/board-4430sdp.c

@@ -881,5 +881,5 @@ MACHINE_START(OMAP_4430SDP, "OMAP4430 4430SDP board")
 	.init_machine	= omap_4430sdp_init,
 	.init_late	= omap4430_init_late,
 	.timer		= &omap4_timer,
-	.restart	= omap_prcm_restart,
+	.restart	= omap44xx_restart,
 MACHINE_END

arch/arm/mach-omap2/board-am3517crane.c

@@ -93,5 +93,5 @@ MACHINE_START(CRANEBOARD, "AM3517/05 CRANEBOARD")
 	.init_machine	= am3517_crane_init,
 	.init_late	= am35xx_init_late,
 	.timer		= &omap3_timer,
-	.restart	= omap_prcm_restart,
+	.restart	= omap3xxx_restart,
 MACHINE_END

arch/arm/mach-omap2/board-am3517evm.c

@@ -393,5 +393,5 @@ MACHINE_START(OMAP3517EVM, "OMAP3517/AM3517 EVM")
 	.init_machine	= am3517_evm_init,
 	.init_late	= am35xx_init_late,
 	.timer		= &omap3_timer,
-	.restart	= omap_prcm_restart,
+	.restart	= omap3xxx_restart,
 MACHINE_END

arch/arm/mach-omap2/board-apollon.c

@@ -338,5 +338,5 @@ MACHINE_START(OMAP_APOLLON, "OMAP24xx Apollon")
 	.init_machine	= omap_apollon_init,
 	.init_late	= omap2420_init_late,
 	.timer		= &omap2_timer,
-	.restart	= omap_prcm_restart,
+	.restart	= omap2xxx_restart,
 MACHINE_END

arch/arm/mach-omap2/board-cm-t35.c

@@ -751,18 +751,18 @@ MACHINE_START(CM_T35, "Compulab CM-T35")
 	.init_machine	= cm_t35_init,
 	.init_late	= omap35xx_init_late,
 	.timer		= &omap3_timer,
-	.restart	= omap_prcm_restart,
+	.restart	= omap3xxx_restart,
 MACHINE_END
 
 MACHINE_START(CM_T3730, "Compulab CM-T3730")
-	.atag_offset    = 0x100,
-	.reserve        = omap_reserve,
-	.map_io         = omap3_map_io,
-	.init_early     = omap3630_init_early,
-	.init_irq       = omap3_init_irq,
+	.atag_offset	= 0x100,
+	.reserve	= omap_reserve,
+	.map_io		= omap3_map_io,
+	.init_early	= omap3630_init_early,
+	.init_irq	= omap3_init_irq,
 	.handle_irq	= omap3_intc_handle_irq,
-	.init_machine   = cm_t3730_init,
+	.init_machine	= cm_t3730_init,
 	.init_late     = omap3630_init_late,
-	.timer          = &omap3_timer,
-	.restart	= omap_prcm_restart,
+	.timer		= &omap3_timer,
+	.restart	= omap3xxx_restart,
 MACHINE_END

arch/arm/mach-omap2/board-cm-t3517.c

@@ -298,5 +298,5 @@ MACHINE_START(CM_T3517, "Compulab CM-T3517")
 	.init_machine	= cm_t3517_init,
 	.init_late	= am35xx_init_late,
 	.timer		= &omap3_timer,
-	.restart	= omap_prcm_restart,
+	.restart	= omap3xxx_restart,
 MACHINE_END

arch/arm/mach-omap2/board-devkit8000.c

@@ -643,5 +643,5 @@ MACHINE_START(DEVKIT8000, "OMAP3 Devkit8000")
 	.init_machine	= devkit8000_init,
 	.init_late	= omap35xx_init_late,
 	.timer		= &omap3_secure_timer,
-	.restart	= omap_prcm_restart,
+	.restart	= omap3xxx_restart,
 MACHINE_END

arch/arm/mach-omap2/board-generic.c

@@ -57,7 +57,7 @@ DT_MACHINE_START(OMAP242X_DT, "Generic OMAP2420 (Flattened Device Tree)")
 	.init_machine	= omap_generic_init,
 	.timer		= &omap2_timer,
 	.dt_compat	= omap242x_boards_compat,
-	.restart	= omap_prcm_restart,
+	.restart	= omap2xxx_restart,
 MACHINE_END
 #endif
 
@@ -76,7 +76,7 @@ DT_MACHINE_START(OMAP243X_DT, "Generic OMAP2430 (Flattened Device Tree)")
 	.init_machine	= omap_generic_init,
 	.timer		= &omap2_timer,
 	.dt_compat	= omap243x_boards_compat,
-	.restart	= omap_prcm_restart,
+	.restart	= omap2xxx_restart,
 MACHINE_END
 #endif
 
@@ -95,7 +95,7 @@ DT_MACHINE_START(OMAP3_DT, "Generic OMAP3 (Flattened Device Tree)")
 	.init_machine	= omap_generic_init,
 	.timer		= &omap3_timer,
 	.dt_compat	= omap3_boards_compat,
-	.restart	= omap_prcm_restart,
+	.restart	= omap3xxx_restart,
 MACHINE_END
 
 static const char *omap3_gp_boards_compat[] __initdata = {
@@ -112,7 +112,7 @@ DT_MACHINE_START(OMAP3_GP_DT, "Generic OMAP3-GP (Flattened Device Tree)")
 	.init_machine	= omap_generic_init,
 	.timer		= &omap3_secure_timer,
 	.dt_compat	= omap3_gp_boards_compat,
-	.restart	= omap_prcm_restart,
+	.restart	= omap3xxx_restart,
 MACHINE_END
 #endif
 
@@ -151,7 +151,7 @@ DT_MACHINE_START(OMAP4_DT, "Generic OMAP4 (Flattened Device Tree)")
 	.init_late	= omap4430_init_late,
 	.timer		= &omap4_timer,
 	.dt_compat	= omap4_boards_compat,
-	.restart	= omap_prcm_restart,
+	.restart	= omap44xx_restart,
 MACHINE_END
 #endif
 
@@ -171,6 +171,6 @@ DT_MACHINE_START(OMAP5_DT, "Generic OMAP5 (Flattened Device Tree)")
 	.init_machine	= omap_generic_init,
 	.timer		= &omap5_timer,
 	.dt_compat	= omap5_boards_compat,
-	.restart	= omap_prcm_restart,
+	.restart	= omap44xx_restart,
 MACHINE_END
 #endif

arch/arm/mach-omap2/board-h4.c

@@ -386,5 +386,5 @@ MACHINE_START(OMAP_H4, "OMAP2420 H4 board")
 	.init_machine	= omap_h4_init,
 	.init_late	= omap2420_init_late,
 	.timer		= &omap2_timer,
-	.restart	= omap_prcm_restart,
+	.restart	= omap2xxx_restart,
 MACHINE_END

arch/arm/mach-omap2/board-igep0020.c

@@ -651,7 +651,7 @@ MACHINE_START(IGEP0020, "IGEP v2 board")
 	.init_machine	= igep_init,
 	.init_late	= omap35xx_init_late,
 	.timer		= &omap3_timer,
-	.restart	= omap_prcm_restart,
+	.restart	= omap3xxx_restart,
 MACHINE_END
 
 MACHINE_START(IGEP0030, "IGEP OMAP3 module")
@@ -664,5 +664,5 @@ MACHINE_START(IGEP0030, "IGEP OMAP3 module")
 	.init_machine	= igep_init,
 	.init_late	= omap35xx_init_late,
 	.timer		= &omap3_timer,
-	.restart	= omap_prcm_restart,
+	.restart	= omap3xxx_restart,
 MACHINE_END

arch/arm/mach-omap2/board-ldp.c

@@ -436,5 +436,5 @@ MACHINE_START(OMAP_LDP, "OMAP LDP board")
 	.init_machine	= omap_ldp_init,
 	.init_late	= omap3430_init_late,
 	.timer		= &omap3_timer,
-	.restart	= omap_prcm_restart,
+	.restart	= omap3xxx_restart,
 MACHINE_END

arch/arm/mach-omap2/board-n8x0.c

@@ -690,7 +690,7 @@ MACHINE_START(NOKIA_N800, "Nokia N800")
 	.init_machine	= n8x0_init_machine,
 	.init_late	= omap2420_init_late,
 	.timer		= &omap2_timer,
-	.restart	= omap_prcm_restart,
+	.restart	= omap2xxx_restart,
 MACHINE_END
 
 MACHINE_START(NOKIA_N810, "Nokia N810")
@@ -703,7 +703,7 @@ MACHINE_START(NOKIA_N810, "Nokia N810")
 	.init_machine	= n8x0_init_machine,
 	.init_late	= omap2420_init_late,
 	.timer		= &omap2_timer,
-	.restart	= omap_prcm_restart,
+	.restart	= omap2xxx_restart,
 MACHINE_END
 
 MACHINE_START(NOKIA_N810_WIMAX, "Nokia N810 WiMAX")
@@ -716,5 +716,5 @@ MACHINE_START(NOKIA_N810_WIMAX, "Nokia N810 WiMAX")
 	.init_machine	= n8x0_init_machine,
 	.init_late	= omap2420_init_late,
 	.timer		= &omap2_timer,
-	.restart	= omap_prcm_restart,
+	.restart	= omap2xxx_restart,
 MACHINE_END

arch/arm/mach-omap2/board-omap3beagle.c

@@ -545,5 +545,5 @@ MACHINE_START(OMAP3_BEAGLE, "OMAP3 Beagle Board")
 	.init_machine	= omap3_beagle_init,
 	.init_late	= omap3_init_late,
 	.timer		= &omap3_secure_timer,
-	.restart	= omap_prcm_restart,
+	.restart	= omap3xxx_restart,
 MACHINE_END

arch/arm/mach-omap2/board-omap3evm.c

@@ -757,5 +757,5 @@ MACHINE_START(OMAP3EVM, "OMAP3 EVM")
 	.init_machine	= omap3_evm_init,
 	.init_late	= omap35xx_init_late,
 	.timer		= &omap3_timer,
-	.restart	= omap_prcm_restart,
+	.restart	= omap3xxx_restart,
 MACHINE_END

arch/arm/mach-omap2/board-omap3logic.c

@@ -232,7 +232,7 @@ MACHINE_START(OMAP3_TORPEDO, "Logic OMAP3 Torpedo board")
 	.init_machine	= omap3logic_init,
 	.init_late	= omap35xx_init_late,
 	.timer		= &omap3_timer,
-	.restart	= omap_prcm_restart,
+	.restart	= omap3xxx_restart,
 MACHINE_END
 
 MACHINE_START(OMAP3530_LV_SOM, "OMAP Logic 3530 LV SOM board")
@@ -245,5 +245,5 @@ MACHINE_START(OMAP3530_LV_SOM, "OMAP Logic 3530 LV SOM board")
 	.init_machine	= omap3logic_init,
 	.init_late	= omap35xx_init_late,
 	.timer		= &omap3_timer,
-	.restart	= omap_prcm_restart,
+	.restart	= omap3xxx_restart,
 MACHINE_END

arch/arm/mach-omap2/board-omap3pandora.c

@@ -619,5 +619,5 @@ MACHINE_START(OMAP3_PANDORA, "Pandora Handheld Console")
 	.init_machine	= omap3pandora_init,
 	.init_late	= omap35xx_init_late,
 	.timer		= &omap3_timer,
-	.restart	= omap_prcm_restart,
+	.restart	= omap3xxx_restart,
 MACHINE_END

arch/arm/mach-omap2/board-omap3stalker.c

@@ -427,5 +427,5 @@ MACHINE_START(SBC3530, "OMAP3 STALKER")
 	.init_machine		= omap3_stalker_init,
 	.init_late		= omap35xx_init_late,
 	.timer			= &omap3_secure_timer,
-	.restart		= omap_prcm_restart,
+	.restart		= omap3xxx_restart,
 MACHINE_END

arch/arm/mach-omap2/board-omap3touchbook.c

@@ -387,5 +387,5 @@ MACHINE_START(TOUCHBOOK, "OMAP3 touchbook Board")
 	.init_machine	= omap3_touchbook_init,
 	.init_late	= omap3430_init_late,
 	.timer		= &omap3_secure_timer,
-	.restart	= omap_prcm_restart,
+	.restart	= omap3xxx_restart,
 MACHINE_END

arch/arm/mach-omap2/board-omap4panda.c

@@ -524,5 +524,5 @@ MACHINE_START(OMAP4_PANDA, "OMAP4 Panda board")
 	.init_machine	= omap4_panda_init,
 	.init_late	= omap4430_init_late,
 	.timer		= &omap4_timer,
-	.restart	= omap_prcm_restart,
+	.restart	= omap44xx_restart,
 MACHINE_END

arch/arm/mach-omap2/board-overo.c

@@ -553,5 +553,5 @@ MACHINE_START(OVERO, "Gumstix Overo")
 	.init_machine	= overo_init,
 	.init_late	= omap35xx_init_late,
 	.timer		= &omap3_timer,
-	.restart	= omap_prcm_restart,
+	.restart	= omap3xxx_restart,
 MACHINE_END

arch/arm/mach-omap2/board-rm680.c

@@ -148,7 +148,7 @@ MACHINE_START(NOKIA_RM680, "Nokia RM-680 board")
 	.init_machine	= rm680_init,
 	.init_late	= omap3630_init_late,
 	.timer		= &omap3_timer,
-	.restart	= omap_prcm_restart,
+	.restart	= omap3xxx_restart,
 MACHINE_END
 
 MACHINE_START(NOKIA_RM696, "Nokia RM-696 board")
@@ -161,5 +161,5 @@ MACHINE_START(NOKIA_RM696, "Nokia RM-696 board")
 	.init_machine	= rm680_init,
 	.init_late	= omap3630_init_late,
 	.timer		= &omap3_timer,
-	.restart	= omap_prcm_restart,
+	.restart	= omap3xxx_restart,
 MACHINE_END

arch/arm/mach-omap2/board-rx51.c

@@ -127,5 +127,5 @@ MACHINE_START(NOKIA_RX51, "Nokia RX-51 board")
 	.init_machine	= rx51_init,
 	.init_late	= omap3430_init_late,
 	.timer		= &omap3_timer,
-	.restart	= omap_prcm_restart,
+	.restart	= omap3xxx_restart,
 MACHINE_END

arch/arm/mach-omap2/board-ti8168evm.c

@@ -46,7 +46,7 @@ MACHINE_START(TI8168EVM, "ti8168evm")
 	.timer		= &omap3_timer,
 	.init_machine	= ti81xx_evm_init,
 	.init_late	= ti81xx_init_late,
-	.restart	= omap_prcm_restart,
+	.restart	= omap44xx_restart,
 MACHINE_END
 
 MACHINE_START(TI8148EVM, "ti8148evm")
@@ -58,5 +58,5 @@ MACHINE_START(TI8148EVM, "ti8148evm")
 	.timer		= &omap3_timer,
 	.init_machine	= ti81xx_evm_init,
 	.init_late	= ti81xx_init_late,
-	.restart	= omap_prcm_restart,
+	.restart	= omap44xx_restart,
 MACHINE_END

arch/arm/mach-omap2/board-zoom.c

@@ -138,7 +138,7 @@ MACHINE_START(OMAP_ZOOM2, "OMAP Zoom2 board")
 	.init_machine	= omap_zoom_init,
 	.init_late	= omap3430_init_late,
 	.timer		= &omap3_timer,
-	.restart	= omap_prcm_restart,
+	.restart	= omap3xxx_restart,
 MACHINE_END
 
 MACHINE_START(OMAP_ZOOM3, "OMAP Zoom3 board")
@@ -151,5 +151,5 @@ MACHINE_START(OMAP_ZOOM3, "OMAP Zoom3 board")
 	.init_machine	= omap_zoom_init,
 	.init_late	= omap3630_init_late,
 	.timer		= &omap3_timer,
-	.restart	= omap_prcm_restart,
+	.restart	= omap3xxx_restart,
 MACHINE_END

arch/arm/mach-omap2/clkt2xxx_apll.c

@@ -21,11 +21,10 @@
 #include <linux/clk.h>
 #include <linux/io.h>
 
-#include <plat/prcm.h>
 
 #include "clock.h"
 #include "clock2xxx.h"
-#include "cm2xxx_3xxx.h"
+#include "cm2xxx.h"
 #include "cm-regbits-24xx.h"
 
 /* CM_CLKEN_PLL.EN_{54,96}M_PLL options (24XX) */
@@ -37,44 +36,16 @@
 #define APLLS_CLKIN_13MHZ		2
 #define APLLS_CLKIN_12MHZ		3
 
-void __iomem *cm_idlest_pll;
-
 /* Private functions */
 
-/* Enable an APLL if off */
-static int omap2_clk_apll_enable(struct clk *clk, u32 status_mask)
+static int _apll96_enable(struct clk *clk)
 {
-	u32 cval, apll_mask;
-
-	apll_mask = EN_APLL_LOCKED << clk->enable_bit;
-
-	cval = omap2_cm_read_mod_reg(PLL_MOD, CM_CLKEN);
-
-	if ((cval & apll_mask) == apll_mask)
-		return 0;   /* apll already enabled */
-
-	cval &= ~apll_mask;
-	cval |= apll_mask;
-	omap2_cm_write_mod_reg(cval, PLL_MOD, CM_CLKEN);
-
-	omap2_cm_wait_idlest(cm_idlest_pll, status_mask,
-			     OMAP24XX_CM_IDLEST_VAL, __clk_get_name(clk));
-
-	/*
-	 * REVISIT: Should we return an error code if omap2_wait_clock_ready()
-	 * fails?
-	 */
-	return 0;
+	return omap2xxx_cm_apll96_enable();
 }
 
-static int omap2_clk_apll96_enable(struct clk *clk)
+static int _apll54_enable(struct clk *clk)
 {
-	return omap2_clk_apll_enable(clk, OMAP24XX_ST_96M_APLL_MASK);
-}
-
-static int omap2_clk_apll54_enable(struct clk *clk)
-{
-	return omap2_clk_apll_enable(clk, OMAP24XX_ST_54M_APLL_MASK);
+	return omap2xxx_cm_apll54_enable();
 }
 
 static void _apll96_allow_idle(struct clk *clk)
@@ -97,28 +68,28 @@ static void _apll54_deny_idle(struct clk *clk)
 	omap2xxx_cm_set_apll54_disable_autoidle();
 }
 
-/* Stop APLL */
-static void omap2_clk_apll_disable(struct clk *clk)
+static void _apll96_disable(struct clk *clk)
 {
-	u32 cval;
+	omap2xxx_cm_apll96_disable();
+}
 
-	cval = omap2_cm_read_mod_reg(PLL_MOD, CM_CLKEN);
-	cval &= ~(EN_APLL_LOCKED << clk->enable_bit);
-	omap2_cm_write_mod_reg(cval, PLL_MOD, CM_CLKEN);
+static void _apll54_disable(struct clk *clk)
+{
+	omap2xxx_cm_apll54_disable();
 }
 
 /* Public data */
 
 const struct clkops clkops_apll96 = {
-	.enable		= omap2_clk_apll96_enable,
-	.disable	= omap2_clk_apll_disable,
+	.enable		= _apll96_enable,
+	.disable	= _apll96_disable,
 	.allow_idle	= _apll96_allow_idle,
 	.deny_idle	= _apll96_deny_idle,
 };
 
 const struct clkops clkops_apll54 = {
-	.enable		= omap2_clk_apll54_enable,
-	.disable	= omap2_clk_apll_disable,
+	.enable		= _apll54_enable,
+	.disable	= _apll54_disable,
 	.allow_idle	= _apll54_allow_idle,
 	.deny_idle	= _apll54_deny_idle,
 };

arch/arm/mach-omap2/clkt2xxx_dpll.c

@@ -15,7 +15,7 @@
 #include <linux/io.h>
 
 #include "clock.h"
-#include "cm2xxx_3xxx.h"
+#include "cm2xxx.h"
 #include "cm-regbits-24xx.h"
 
 /* Private functions */

arch/arm/mach-omap2/clkt2xxx_dpllcore.c

@@ -28,16 +28,22 @@
 #include "clock.h"
 #include "clock2xxx.h"
 #include "opp2xxx.h"
-#include "cm2xxx_3xxx.h"
+#include "cm2xxx.h"
 #include "cm-regbits-24xx.h"
 #include "sdrc.h"
 #include "sram.h"
 
 /* #define DOWN_VARIABLE_DPLL 1 */		/* Experimental */
 
+/*
+ * dpll_core_ck: pointer to the combined dpll_ck + core_ck on OMAP2xxx
+ * (currently defined as "dpll_ck" in the OMAP2xxx clock tree).  Set
+ * during dpll_ck init and used later by omap2xxx_clk_get_core_rate().
+ */
+static struct clk *dpll_core_ck;
+
 /**
  * omap2xxx_clk_get_core_rate - return the CORE_CLK rate
- * @clk: pointer to the combined dpll_ck + core_ck (currently "dpll_ck")
  *
  * Returns the CORE_CLK rate.  CORE_CLK can have one of three rate
  * sources on OMAP2xxx: the DPLL CLKOUT rate, DPLL CLKOUTX2, or 32KHz
@@ -45,12 +51,14 @@
  * struct clk *dpll_ck, which is a composite clock of dpll_ck and
  * core_ck.
  */
-unsigned long omap2xxx_clk_get_core_rate(struct clk *clk)
+unsigned long omap2xxx_clk_get_core_rate(void)
 {
 	long long core_clk;
 	u32 v;
 
-	core_clk = omap2_get_dpll_rate(clk);
+	WARN_ON(!dpll_core_ck);
+
+	core_clk = omap2_get_dpll_rate(dpll_core_ck);
 
 	v = omap2_cm_read_mod_reg(PLL_MOD, CM_CLKSEL2);
 	v &= OMAP24XX_CORE_CLK_SRC_MASK;
@@ -98,7 +106,7 @@ static long omap2_dpllcore_round_rate(unsigned long target_rate)
 
 unsigned long omap2_dpllcore_recalc(struct clk *clk)
 {
-	return omap2xxx_clk_get_core_rate(clk);
+	return omap2xxx_clk_get_core_rate();
 }
 
 int omap2_reprogram_dpllcore(struct clk *clk, unsigned long rate)
@@ -108,7 +116,7 @@ int omap2_reprogram_dpllcore(struct clk *clk, unsigned long rate)
 	struct prcm_config tmpset;
 	const struct dpll_data *dd;
 
-	cur_rate = omap2xxx_clk_get_core_rate(dclk);
+	cur_rate = omap2xxx_clk_get_core_rate();
 	mult = omap2_cm_read_mod_reg(PLL_MOD, CM_CLKSEL2);
 	mult &= OMAP24XX_CORE_CLK_SRC_MASK;
 
@@ -169,3 +177,19 @@ int omap2_reprogram_dpllcore(struct clk *clk, unsigned long rate)
 	return 0;
 }
 
+/**
+ * omap2xxx_clkt_dpllcore_init - clk init function for dpll_ck
+ * @clk: struct clk *dpll_ck
+ *
+ * Store a local copy of @clk in dpll_core_ck so other code can query
+ * the core rate without having to clk_get(), which can sleep.  Must
+ * only be called once.  No return value.  XXX If the clock
+ * registration process is ever changed such that dpll_ck is no longer
+ * statically defined, this code may need to change to increment some
+ * kind of use count on dpll_ck.
+ */
+void omap2xxx_clkt_dpllcore_init(struct clk *clk)
+{
+	WARN(dpll_core_ck, "dpll_core_ck already set - should never happen");
+	dpll_core_ck = clk;
+}

arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c

@@ -1,7 +1,7 @@
 /*
  * OMAP2xxx DVFS virtual clock functions
  *
- * Copyright (C) 2005-2008 Texas Instruments, Inc.
+ * Copyright (C) 2005-2008, 2012 Texas Instruments, Inc.
  * Copyright (C) 2004-2010 Nokia Corporation
  *
  * Contacts:
@@ -37,7 +37,7 @@
 #include "clock.h"
 #include "clock2xxx.h"
 #include "opp2xxx.h"
-#include "cm2xxx_3xxx.h"
+#include "cm2xxx.h"
 #include "cm-regbits-24xx.h"
 #include "sdrc.h"
 #include "sram.h"
@@ -45,6 +45,13 @@
 const struct prcm_config *curr_prcm_set;
 const struct prcm_config *rate_table;
 
+/*
+ * sys_ck_rate: the rate of the external high-frequency clock
+ * oscillator on the board.  Set by the SoC-specific clock init code.
+ * Once set during a boot, will not change.
+ */
+static unsigned long sys_ck_rate;
+
 /**
  * omap2_table_mpu_recalc - just return the MPU speed
  * @clk: virt_prcm_set struct clk
@@ -66,15 +73,14 @@ unsigned long omap2_table_mpu_recalc(struct clk *clk)
 long omap2_round_to_table_rate(struct clk *clk, unsigned long rate)
 {
 	const struct prcm_config *ptr;
-	long highest_rate, sys_clk_rate;
+	long highest_rate;
 
 	highest_rate = -EINVAL;
-	sys_clk_rate = __clk_get_rate(sclk);
 
 	for (ptr = rate_table; ptr->mpu_speed; ptr++) {
 		if (!(ptr->flags & cpu_mask))
 			continue;
-		if (ptr->xtal_speed != sys_clk_rate)
+		if (ptr->xtal_speed != sys_ck_rate)
 			continue;
 
 		highest_rate = ptr->mpu_speed;
@@ -93,15 +99,12 @@ int omap2_select_table_rate(struct clk *clk, unsigned long rate)
 	const struct prcm_config *prcm;
 	unsigned long found_speed = 0;
 	unsigned long flags;
-	long sys_clk_rate;
-
-	sys_clk_rate = __clk_get_rate(sclk);
 
 	for (prcm = rate_table; prcm->mpu_speed; prcm++) {
 		if (!(prcm->flags & cpu_mask))
 			continue;
 
-		if (prcm->xtal_speed != sys_clk_rate)
+		if (prcm->xtal_speed != sys_ck_rate)
 			continue;
 
 		if (prcm->mpu_speed <= rate) {
@@ -117,7 +120,7 @@ int omap2_select_table_rate(struct clk *clk, unsigned long rate)
 	}
 
 	curr_prcm_set = prcm;
-	cur_rate = omap2xxx_clk_get_core_rate(dclk);
+	cur_rate = omap2xxx_clk_get_core_rate();
 
 	if (prcm->dpll_speed == cur_rate / 2) {
 		omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL, 1);
@@ -167,3 +170,50 @@ int omap2_select_table_rate(struct clk *clk, unsigned long rate)
 
 	return 0;
 }
+
+/**
+ * omap2xxx_clkt_vps_check_bootloader_rate - determine which of the rate
+ * table sets matches the current CORE DPLL hardware rate
+ *
+ * Check the MPU rate set by bootloader.  Sets the 'curr_prcm_set'
+ * global to point to the active rate set when found; otherwise, sets
+ * it to NULL.  No return value;
+ */
+void omap2xxx_clkt_vps_check_bootloader_rates(void)
+{
+	const struct prcm_config *prcm = NULL;
+	unsigned long rate;
+
+	rate = omap2xxx_clk_get_core_rate();
+	for (prcm = rate_table; prcm->mpu_speed; prcm++) {
+		if (!(prcm->flags & cpu_mask))
+			continue;
+		if (prcm->xtal_speed != sys_ck_rate)
+			continue;
+		if (prcm->dpll_speed <= rate)
+			break;
+	}
+	curr_prcm_set = prcm;
+}
+
+/**
+ * omap2xxx_clkt_vps_late_init - store a copy of the sys_ck rate
+ *
+ * Store a copy of the sys_ck rate for later use by the OMAP2xxx DVFS
+ * code.  (The sys_ck rate does not -- or rather, must not -- change
+ * during kernel runtime.)  Must be called after we have a valid
+ * sys_ck rate, but before the virt_prcm_set clock rate is
+ * recalculated.  No return value.
+ */
+void omap2xxx_clkt_vps_late_init(void)
+{
+	struct clk *c;
+
+	c = clk_get(NULL, "sys_ck");
+	if (IS_ERR(c)) {
+		WARN(1, "could not locate sys_ck\n");
+	} else {
+		sys_ck_rate = clk_get_rate(c);
+		clk_put(c);
+	}
+}

arch/arm/mach-omap2/clkt_iclk.c

@@ -14,7 +14,6 @@
 #include <linux/clk.h>
 #include <linux/io.h>
 
-#include <plat/prcm.h>
 
 #include "clock.h"
 #include "clock2xxx.h"

arch/arm/mach-omap2/clock.c

@@ -26,16 +26,24 @@
 
 #include <asm/cpu.h>
 
-#include <plat/prcm.h>
 
 #include <trace/events/power.h>
 
 #include "soc.h"
 #include "clockdomain.h"
 #include "clock.h"
-#include "cm2xxx_3xxx.h"
+#include "cm.h"
+#include "cm2xxx.h"
+#include "cm3xxx.h"
 #include "cm-regbits-24xx.h"
 #include "cm-regbits-34xx.h"
+#include "common.h"
+
+/*
+ * MAX_MODULE_ENABLE_WAIT: maximum of number of microseconds to wait
+ * for a module to indicate that it is no longer in idle
+ */
+#define MAX_MODULE_ENABLE_WAIT		100000
 
 u16 cpu_mask;
 
@@ -57,6 +65,40 @@ static DEFINE_SPINLOCK(clockfw_lock);
 
 /* Private functions */
 
+
+/**
+ * _wait_idlest_generic - wait for a module to leave the idle state
+ * @reg: virtual address of module IDLEST register
+ * @mask: value to mask against to determine if the module is active
+ * @idlest: idle state indicator (0 or 1) for the clock
+ * @name: name of the clock (for printk)
+ *
+ * Wait for a module to leave idle, where its idle-status register is
+ * not inside the CM module.  Returns 1 if the module left idle
+ * promptly, or 0 if the module did not leave idle before the timeout
+ * elapsed.  XXX Deprecated - should be moved into drivers for the
+ * individual IP block that the IDLEST register exists in.
+ */
+static int _wait_idlest_generic(void __iomem *reg, u32 mask, u8 idlest,
+				const char *name)
+{
+	int i = 0, ena = 0;
+
+	ena = (idlest) ? 0 : mask;
+
+	omap_test_timeout(((__raw_readl(reg) & mask) == ena),
+			  MAX_MODULE_ENABLE_WAIT, i);
+
+	if (i < MAX_MODULE_ENABLE_WAIT)
+		pr_debug("omap clock: module associated with clock %s ready after %d loops\n",
+			 name, i);
+	else
+		pr_err("omap clock: module associated with clock %s didn't enable in %d tries\n",
+		       name, MAX_MODULE_ENABLE_WAIT);
+
+	return (i < MAX_MODULE_ENABLE_WAIT) ? 1 : 0;
+};
+
 /**
  * _omap2_module_wait_ready - wait for an OMAP module to leave IDLE
  * @clk: struct clk * belonging to the module
@@ -70,7 +112,9 @@ static DEFINE_SPINLOCK(clockfw_lock);
 static void _omap2_module_wait_ready(struct clk *clk)
 {
 	void __iomem *companion_reg, *idlest_reg;
-	u8 other_bit, idlest_bit, idlest_val;
+	u8 other_bit, idlest_bit, idlest_val, idlest_reg_id;
+	s16 prcm_mod;
+	int r;
 
 	/* Not all modules have multiple clocks that their IDLEST depends on */
 	if (clk->ops->find_companion) {
@@ -81,8 +125,14 @@ static void _omap2_module_wait_ready(struct clk *clk)
 
 	clk->ops->find_idlest(clk, &idlest_reg, &idlest_bit, &idlest_val);
 
-	omap2_cm_wait_idlest(idlest_reg, (1 << idlest_bit), idlest_val,
-			     __clk_get_name(clk));
+	r = cm_split_idlest_reg(idlest_reg, &prcm_mod, &idlest_reg_id);
+	if (r) {
+		/* IDLEST register not in the CM module */
+		_wait_idlest_generic(idlest_reg, (1 << idlest_bit), idlest_val,
+				     clk->name);
+	} else {
+		cm_wait_module_ready(prcm_mod, idlest_reg_id, idlest_bit);
+	};
 }
 
 /* Public functions */

arch/arm/mach-omap2/clock.h

@@ -409,33 +409,6 @@ extern void omap2_clkt_iclk_deny_idle(struct clk *clk);
 u32 omap2_get_dpll_rate(struct clk *clk);
 void omap2_init_dpll_parent(struct clk *clk);
 
-int omap2_wait_clock_ready(void __iomem *reg, u32 cval, const char *name);
-
-
-#ifdef CONFIG_ARCH_OMAP2
-void omap2xxx_clk_prepare_for_reboot(void);
-#else
-static inline void omap2xxx_clk_prepare_for_reboot(void)
-{
-}
-#endif
-
-#ifdef CONFIG_ARCH_OMAP3
-void omap3_clk_prepare_for_reboot(void);
-#else
-static inline void omap3_clk_prepare_for_reboot(void)
-{
-}
-#endif
-
-#ifdef CONFIG_ARCH_OMAP4
-void omap4_clk_prepare_for_reboot(void);
-#else
-static inline void omap4_clk_prepare_for_reboot(void)
-{
-}
-#endif
-
 int omap2_dflt_clk_enable(struct clk *clk);
 void omap2_dflt_clk_disable(struct clk *clk);
 void omap2_clk_dflt_find_companion(struct clk *clk, void __iomem **other_reg,
@@ -454,7 +427,6 @@ extern const struct clkops clkops_dummy;
 extern const struct clkops clkops_omap2_dflt;
 
 extern struct clk_functions omap2_clk_functions;
-extern struct clk *vclk, *sclk;
 
 extern const struct clksel_rate gpt_32k_rates[];
 extern const struct clksel_rate gpt_sys_rates[];

arch/arm/mach-omap2/clock2420_data.c

@@ -1,7 +1,7 @@
 /*
  * OMAP2420 clock data
  *
- * Copyright (C) 2005-2009 Texas Instruments, Inc.
+ * Copyright (C) 2005-2009, 2012 Texas Instruments, Inc.
  * Copyright (C) 2004-2011 Nokia Corporation
  *
  * Contacts:
@@ -23,7 +23,7 @@
 #include "clock.h"
 #include "clock2xxx.h"
 #include "opp2xxx.h"
-#include "cm2xxx_3xxx.h"
+#include "cm2xxx.h"
 #include "prm2xxx_3xxx.h"
 #include "prm-regbits-24xx.h"
 #include "cm-regbits-24xx.h"
@@ -124,6 +124,7 @@ static struct clk dpll_ck = {
 	.name		= "dpll_ck",
 	.ops		= &clkops_omap2xxx_dpll_ops,
 	.parent		= &sys_ck,		/* Can be func_32k also */
+	.init		= &omap2xxx_clkt_dpllcore_init,
 	.dpll_data	= &dpll_dd,
 	.clkdm_name	= "wkup_clkdm",
 	.recalc		= &omap2_dpllcore_recalc,
@@ -1924,12 +1925,9 @@ static struct omap_clk omap2420_clks[] = {
 
 int __init omap2420_clk_init(void)
 {
-	const struct prcm_config *prcm;
 	struct omap_clk *c;
-	u32 clkrate;
 
 	prcm_clksrc_ctrl = OMAP2420_PRCM_CLKSRC_CTRL;
-	cm_idlest_pll = OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST);
 	cpu_mask = RATE_IN_242X;
 	rate_table = omap2420_rate_table;
 
@@ -1949,20 +1947,13 @@ int __init omap2420_clk_init(void)
 		omap2_init_clk_clkdm(c->lk.clk);
 	}
 
+	omap2xxx_clkt_vps_late_init();
+
 	/* Disable autoidle on all clocks; let the PM code enable it later */
 	omap_clk_disable_autoidle_all();
 
-	/* Check the MPU rate set by bootloader */
-	clkrate = omap2xxx_clk_get_core_rate(&dpll_ck);
-	for (prcm = rate_table; prcm->mpu_speed; prcm++) {
-		if (!(prcm->flags & cpu_mask))
-			continue;
-		if (prcm->xtal_speed != sys_ck.rate)
-			continue;
-		if (prcm->dpll_speed <= clkrate)
-			break;
-	}
-	curr_prcm_set = prcm;
+	/* XXX Can this be done from the virt_prcm_set clk init function? */
+	omap2xxx_clkt_vps_check_bootloader_rates();
 
 	recalculate_root_clocks();
 
@@ -1976,11 +1967,6 @@ int __init omap2420_clk_init(void)
 	 */
 	clk_enable_init_clocks();
 
-	/* Avoid sleeping sleeping during omap2_clk_prepare_for_reboot() */
-	vclk = clk_get(NULL, "virt_prcm_set");
-	sclk = clk_get(NULL, "sys_ck");
-	dclk = clk_get(NULL, "dpll_ck");
-
 	return 0;
 }
 

arch/arm/mach-omap2/clock2430.c

@@ -25,7 +25,7 @@
 #include "iomap.h"
 #include "clock.h"
 #include "clock2xxx.h"
-#include "cm2xxx_3xxx.h"
+#include "cm2xxx.h"
 #include "cm-regbits-24xx.h"
 
 /**

arch/arm/mach-omap2/clock2430_data.c

@@ -1,7 +1,7 @@
 /*
  * OMAP2430 clock data
  *
- * Copyright (C) 2005-2009 Texas Instruments, Inc.
+ * Copyright (C) 2005-2009, 2012 Texas Instruments, Inc.
  * Copyright (C) 2004-2011 Nokia Corporation
  *
  * Contacts:
@@ -22,7 +22,7 @@
 #include "clock.h"
 #include "clock2xxx.h"
 #include "opp2xxx.h"
-#include "cm2xxx_3xxx.h"
+#include "cm2xxx.h"
 #include "prm2xxx_3xxx.h"
 #include "prm-regbits-24xx.h"
 #include "cm-regbits-24xx.h"
@@ -123,6 +123,7 @@ static struct clk dpll_ck = {
 	.name		= "dpll_ck",
 	.ops		= &clkops_omap2xxx_dpll_ops,
 	.parent		= &sys_ck,		/* Can be func_32k also */
+	.init		= &omap2xxx_clkt_dpllcore_init,
 	.dpll_data	= &dpll_dd,
 	.clkdm_name	= "wkup_clkdm",
 	.recalc		= &omap2_dpllcore_recalc,
@@ -2023,12 +2024,9 @@ static struct omap_clk omap2430_clks[] = {
 
 int __init omap2430_clk_init(void)
 {
-	const struct prcm_config *prcm;
 	struct omap_clk *c;
-	u32 clkrate;
 
 	prcm_clksrc_ctrl = OMAP2430_PRCM_CLKSRC_CTRL;
-	cm_idlest_pll = OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST);
 	cpu_mask = RATE_IN_243X;
 	rate_table = omap2430_rate_table;
 
@@ -2048,20 +2046,13 @@ int __init omap2430_clk_init(void)
 		omap2_init_clk_clkdm(c->lk.clk);
 	}
 
+	omap2xxx_clkt_vps_late_init();
+
 	/* Disable autoidle on all clocks; let the PM code enable it later */
 	omap_clk_disable_autoidle_all();
 
-	/* Check the MPU rate set by bootloader */
-	clkrate = omap2xxx_clk_get_core_rate(&dpll_ck);
-	for (prcm = rate_table; prcm->mpu_speed; prcm++) {
-		if (!(prcm->flags & cpu_mask))
-			continue;
-		if (prcm->xtal_speed != sys_ck.rate)
-			continue;
-		if (prcm->dpll_speed <= clkrate)
-			break;
-	}
-	curr_prcm_set = prcm;
+	/* XXX Can this be done from the virt_prcm_set clk init function? */
+	omap2xxx_clkt_vps_check_bootloader_rates();
 
 	recalculate_root_clocks();
 
@@ -2075,11 +2066,6 @@ int __init omap2430_clk_init(void)
 	 */
 	clk_enable_init_clocks();
 
-	/* Avoid sleeping sleeping during omap2_clk_prepare_for_reboot() */
-	vclk = clk_get(NULL, "virt_prcm_set");
-	sclk = clk_get(NULL, "sys_ck");
-	dclk = clk_get(NULL, "dpll_ck");
-
 	return 0;
 }
 

arch/arm/mach-omap2/clock2xxx.c

@@ -28,26 +28,10 @@
 #include "cm.h"
 #include "cm-regbits-24xx.h"
 
-struct clk *vclk, *sclk, *dclk;
-
 /*
  * Omap24xx specific clock functions
  */
 
-/*
- * Set clocks for bypass mode for reboot to work.
- */
-void omap2xxx_clk_prepare_for_reboot(void)
-{
-	u32 rate;
-
-	if (vclk == NULL || sclk == NULL)
-		return;
-
-	rate = clk_get_rate(sclk);
-	clk_set_rate(vclk, rate);
-}
-
 /*
  * Switch the MPU rate if specified on cmdline.  We cannot do this
  * early until cmdline is parsed.  XXX This should be removed from the

arch/arm/mach-omap2/clock2xxx.h

@@ -15,10 +15,13 @@ unsigned long omap2xxx_sys_clk_recalc(struct clk *clk);
 unsigned long omap2_osc_clk_recalc(struct clk *clk);
 unsigned long omap2_dpllcore_recalc(struct clk *clk);
 int omap2_reprogram_dpllcore(struct clk *clk, unsigned long rate);
-unsigned long omap2xxx_clk_get_core_rate(struct clk *clk);
+unsigned long omap2xxx_clk_get_core_rate(void);
 u32 omap2xxx_get_apll_clkin(void);
 u32 omap2xxx_get_sysclkdiv(void);
 void omap2xxx_clk_prepare_for_reboot(void);
+void omap2xxx_clkt_dpllcore_init(struct clk *clk);
+void omap2xxx_clkt_vps_check_bootloader_rates(void);
+void omap2xxx_clkt_vps_late_init(void);
 
 #ifdef CONFIG_SOC_OMAP2420
 int omap2420_clk_init(void);
@@ -32,9 +35,7 @@ int omap2430_clk_init(void);
 #define omap2430_clk_init()	do { } while(0)
 #endif
 
-extern void __iomem *prcm_clksrc_ctrl, *cm_idlest_pll;
-
-extern struct clk *dclk;
+extern void __iomem *prcm_clksrc_ctrl;
 
 extern const struct clkops clkops_omap2430_i2chs_wait;
 extern const struct clkops clkops_oscck;

arch/arm/mach-omap2/clock34xx.c

@@ -23,7 +23,7 @@
 
 #include "clock.h"
 #include "clock34xx.h"
-#include "cm2xxx_3xxx.h"
+#include "cm3xxx.h"
 #include "cm-regbits-34xx.h"
 
 /**

arch/arm/mach-omap2/clock3517.c

@@ -23,7 +23,7 @@
 
 #include "clock.h"
 #include "clock3517.h"
-#include "cm2xxx_3xxx.h"
+#include "cm3xxx.h"
 #include "cm-regbits-34xx.h"
 
 /*

arch/arm/mach-omap2/clock3xxx_data.c

@@ -28,7 +28,7 @@
 #include "clock34xx.h"
 #include "clock36xx.h"
 #include "clock3517.h"
-#include "cm2xxx_3xxx.h"
+#include "cm3xxx.h"
 #include "cm-regbits-34xx.h"
 #include "prm2xxx_3xxx.h"
 #include "prm-regbits-34xx.h"

arch/arm/mach-omap2/clockdomain2xxx_3xxx.c

@@ -1,341 +0,0 @@
-/*
- * OMAP2 and OMAP3 clockdomain control
- *
- * Copyright (C) 2008-2010 Texas Instruments, Inc.
- * Copyright (C) 2008-2010 Nokia Corporation
- *
- * Derived from mach-omap2/clockdomain.c written by Paul Walmsley
- * Rajendra Nayak <rnayak@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/types.h>
-#include <plat/prcm.h>
-
-#include "soc.h"
-#include "prm.h"
-#include "prm2xxx_3xxx.h"
-#include "cm.h"
-#include "cm2xxx_3xxx.h"
-#include "cm-regbits-24xx.h"
-#include "cm-regbits-34xx.h"
-#include "prm-regbits-24xx.h"
-#include "clockdomain.h"
-
-static int omap2_clkdm_add_wkdep(struct clockdomain *clkdm1,
-						struct clockdomain *clkdm2)
-{
-	omap2_prm_set_mod_reg_bits((1 << clkdm2->dep_bit),
-				clkdm1->pwrdm.ptr->prcm_offs, PM_WKDEP);
-	return 0;
-}
-
-static int omap2_clkdm_del_wkdep(struct clockdomain *clkdm1,
-						 struct clockdomain *clkdm2)
-{
-	omap2_prm_clear_mod_reg_bits((1 << clkdm2->dep_bit),
-				clkdm1->pwrdm.ptr->prcm_offs, PM_WKDEP);
-	return 0;
-}
-
-static int omap2_clkdm_read_wkdep(struct clockdomain *clkdm1,
-						 struct clockdomain *clkdm2)
-{
-	return omap2_prm_read_mod_bits_shift(clkdm1->pwrdm.ptr->prcm_offs,
-				PM_WKDEP, (1 << clkdm2->dep_bit));
-}
-
-static int omap2_clkdm_clear_all_wkdeps(struct clockdomain *clkdm)
-{
-	struct clkdm_dep *cd;
-	u32 mask = 0;
-
-	for (cd = clkdm->wkdep_srcs; cd && cd->clkdm_name; cd++) {
-		if (!cd->clkdm)
-			continue; /* only happens if data is erroneous */
-
-		/* PRM accesses are slow, so minimize them */
-		mask |= 1 << cd->clkdm->dep_bit;
-		atomic_set(&cd->wkdep_usecount, 0);
-	}
-
-	omap2_prm_clear_mod_reg_bits(mask, clkdm->pwrdm.ptr->prcm_offs,
-				 PM_WKDEP);
-	return 0;
-}
-
-static int omap3_clkdm_add_sleepdep(struct clockdomain *clkdm1,
-						 struct clockdomain *clkdm2)
-{
-	omap2_cm_set_mod_reg_bits((1 << clkdm2->dep_bit),
-				clkdm1->pwrdm.ptr->prcm_offs,
-				OMAP3430_CM_SLEEPDEP);
-	return 0;
-}
-
-static int omap3_clkdm_del_sleepdep(struct clockdomain *clkdm1,
-						 struct clockdomain *clkdm2)
-{
-	omap2_cm_clear_mod_reg_bits((1 << clkdm2->dep_bit),
-				clkdm1->pwrdm.ptr->prcm_offs,
-				OMAP3430_CM_SLEEPDEP);
-	return 0;
-}
-
-static int omap3_clkdm_read_sleepdep(struct clockdomain *clkdm1,
-						 struct clockdomain *clkdm2)
-{
-	return omap2_prm_read_mod_bits_shift(clkdm1->pwrdm.ptr->prcm_offs,
-				OMAP3430_CM_SLEEPDEP, (1 << clkdm2->dep_bit));
-}
-
-static int omap3_clkdm_clear_all_sleepdeps(struct clockdomain *clkdm)
-{
-	struct clkdm_dep *cd;
-	u32 mask = 0;
-
-	for (cd = clkdm->sleepdep_srcs; cd && cd->clkdm_name; cd++) {
-		if (!cd->clkdm)
-			continue; /* only happens if data is erroneous */
-
-		/* PRM accesses are slow, so minimize them */
-		mask |= 1 << cd->clkdm->dep_bit;
-		atomic_set(&cd->sleepdep_usecount, 0);
-	}
-	omap2_prm_clear_mod_reg_bits(mask, clkdm->pwrdm.ptr->prcm_offs,
-				OMAP3430_CM_SLEEPDEP);
-	return 0;
-}
-
-static int omap2_clkdm_sleep(struct clockdomain *clkdm)
-{
-	omap2_cm_set_mod_reg_bits(OMAP24XX_FORCESTATE_MASK,
-				clkdm->pwrdm.ptr->prcm_offs,
-				OMAP2_PM_PWSTCTRL);
-	return 0;
-}
-
-static int omap2_clkdm_wakeup(struct clockdomain *clkdm)
-{
-	omap2_cm_clear_mod_reg_bits(OMAP24XX_FORCESTATE_MASK,
-				clkdm->pwrdm.ptr->prcm_offs,
-				OMAP2_PM_PWSTCTRL);
-	return 0;
-}
-
-static void omap2_clkdm_allow_idle(struct clockdomain *clkdm)
-{
-	if (atomic_read(&clkdm->usecount) > 0)
-		_clkdm_add_autodeps(clkdm);
-
-	omap2xxx_cm_clkdm_enable_hwsup(clkdm->pwrdm.ptr->prcm_offs,
-				clkdm->clktrctrl_mask);
-}
-
-static void omap2_clkdm_deny_idle(struct clockdomain *clkdm)
-{
-	omap2xxx_cm_clkdm_disable_hwsup(clkdm->pwrdm.ptr->prcm_offs,
-				clkdm->clktrctrl_mask);
-
-	if (atomic_read(&clkdm->usecount) > 0)
-		_clkdm_del_autodeps(clkdm);
-}
-
-static void _enable_hwsup(struct clockdomain *clkdm)
-{
-	if (cpu_is_omap24xx())
-		omap2xxx_cm_clkdm_enable_hwsup(clkdm->pwrdm.ptr->prcm_offs,
-					       clkdm->clktrctrl_mask);
-	else if (cpu_is_omap34xx())
-		omap3xxx_cm_clkdm_enable_hwsup(clkdm->pwrdm.ptr->prcm_offs,
-					       clkdm->clktrctrl_mask);
-}
-
-static void _disable_hwsup(struct clockdomain *clkdm)
-{
-	if (cpu_is_omap24xx())
-		omap2xxx_cm_clkdm_disable_hwsup(clkdm->pwrdm.ptr->prcm_offs,
-						clkdm->clktrctrl_mask);
-	else if (cpu_is_omap34xx())
-		omap3xxx_cm_clkdm_disable_hwsup(clkdm->pwrdm.ptr->prcm_offs,
-						clkdm->clktrctrl_mask);
-}
-
-static int omap3_clkdm_sleep(struct clockdomain *clkdm)
-{
-	omap3xxx_cm_clkdm_force_sleep(clkdm->pwrdm.ptr->prcm_offs,
-				clkdm->clktrctrl_mask);
-	return 0;
-}
-
-static int omap3_clkdm_wakeup(struct clockdomain *clkdm)
-{
-	omap3xxx_cm_clkdm_force_wakeup(clkdm->pwrdm.ptr->prcm_offs,
-				clkdm->clktrctrl_mask);
-	return 0;
-}
-
-static int omap2_clkdm_clk_enable(struct clockdomain *clkdm)
-{
-	bool hwsup = false;
-
-	if (!clkdm->clktrctrl_mask)
-		return 0;
-
-	hwsup = omap2_cm_is_clkdm_in_hwsup(clkdm->pwrdm.ptr->prcm_offs,
-				clkdm->clktrctrl_mask);
-
-	if (hwsup) {
-		/* Disable HW transitions when we are changing deps */
-		_disable_hwsup(clkdm);
-		_clkdm_add_autodeps(clkdm);
-		_enable_hwsup(clkdm);
-	} else {
-		if (clkdm->flags & CLKDM_CAN_FORCE_WAKEUP)
-			omap2_clkdm_wakeup(clkdm);
-	}
-
-	return 0;
-}
-
-static int omap2_clkdm_clk_disable(struct clockdomain *clkdm)
-{
-	bool hwsup = false;
-
-	if (!clkdm->clktrctrl_mask)
-		return 0;
-
-	hwsup = omap2_cm_is_clkdm_in_hwsup(clkdm->pwrdm.ptr->prcm_offs,
-				clkdm->clktrctrl_mask);
-
-	if (hwsup) {
-		/* Disable HW transitions when we are changing deps */
-		_disable_hwsup(clkdm);
-		_clkdm_del_autodeps(clkdm);
-		_enable_hwsup(clkdm);
-	} else {
-		if (clkdm->flags & CLKDM_CAN_FORCE_SLEEP)
-			omap2_clkdm_sleep(clkdm);
-	}
-
-	return 0;
-}
-
-static void omap3_clkdm_allow_idle(struct clockdomain *clkdm)
-{
-	if (atomic_read(&clkdm->usecount) > 0)
-		_clkdm_add_autodeps(clkdm);
-
-	omap3xxx_cm_clkdm_enable_hwsup(clkdm->pwrdm.ptr->prcm_offs,
-				clkdm->clktrctrl_mask);
-}
-
-static void omap3_clkdm_deny_idle(struct clockdomain *clkdm)
-{
-	omap3xxx_cm_clkdm_disable_hwsup(clkdm->pwrdm.ptr->prcm_offs,
-				clkdm->clktrctrl_mask);
-
-	if (atomic_read(&clkdm->usecount) > 0)
-		_clkdm_del_autodeps(clkdm);
-}
-
-static int omap3xxx_clkdm_clk_enable(struct clockdomain *clkdm)
-{
-	bool hwsup = false;
-
-	if (!clkdm->clktrctrl_mask)
-		return 0;
-
-	/*
-	 * The CLKDM_MISSING_IDLE_REPORTING flag documentation has
-	 * more details on the unpleasant problem this is working
-	 * around
-	 */
-	if ((clkdm->flags & CLKDM_MISSING_IDLE_REPORTING) &&
-	    (clkdm->flags & CLKDM_CAN_FORCE_WAKEUP)) {
-		omap3_clkdm_wakeup(clkdm);
-		return 0;
-	}
-
-	hwsup = omap2_cm_is_clkdm_in_hwsup(clkdm->pwrdm.ptr->prcm_offs,
-				clkdm->clktrctrl_mask);
-
-	if (hwsup) {
-		/* Disable HW transitions when we are changing deps */
-		_disable_hwsup(clkdm);
-		_clkdm_add_autodeps(clkdm);
-		_enable_hwsup(clkdm);
-	} else {
-		if (clkdm->flags & CLKDM_CAN_FORCE_WAKEUP)
-			omap3_clkdm_wakeup(clkdm);
-	}
-
-	return 0;
-}
-
-static int omap3xxx_clkdm_clk_disable(struct clockdomain *clkdm)
-{
-	bool hwsup = false;
-
-	if (!clkdm->clktrctrl_mask)
-		return 0;
-
-	/*
-	 * The CLKDM_MISSING_IDLE_REPORTING flag documentation has
-	 * more details on the unpleasant problem this is working
-	 * around
-	 */
-	if (clkdm->flags & CLKDM_MISSING_IDLE_REPORTING &&
-	    !(clkdm->flags & CLKDM_CAN_FORCE_SLEEP)) {
-		_enable_hwsup(clkdm);
-		return 0;
-	}
-
-	hwsup = omap2_cm_is_clkdm_in_hwsup(clkdm->pwrdm.ptr->prcm_offs,
-				clkdm->clktrctrl_mask);
-
-	if (hwsup) {
-		/* Disable HW transitions when we are changing deps */
-		_disable_hwsup(clkdm);
-		_clkdm_del_autodeps(clkdm);
-		_enable_hwsup(clkdm);
-	} else {
-		if (clkdm->flags & CLKDM_CAN_FORCE_SLEEP)
-			omap3_clkdm_sleep(clkdm);
-	}
-
-	return 0;
-}
-
-struct clkdm_ops omap2_clkdm_operations = {
-	.clkdm_add_wkdep	= omap2_clkdm_add_wkdep,
-	.clkdm_del_wkdep	= omap2_clkdm_del_wkdep,
-	.clkdm_read_wkdep	= omap2_clkdm_read_wkdep,
-	.clkdm_clear_all_wkdeps	= omap2_clkdm_clear_all_wkdeps,
-	.clkdm_sleep		= omap2_clkdm_sleep,
-	.clkdm_wakeup		= omap2_clkdm_wakeup,
-	.clkdm_allow_idle	= omap2_clkdm_allow_idle,
-	.clkdm_deny_idle	= omap2_clkdm_deny_idle,
-	.clkdm_clk_enable	= omap2_clkdm_clk_enable,
-	.clkdm_clk_disable	= omap2_clkdm_clk_disable,
-};
-
-struct clkdm_ops omap3_clkdm_operations = {
-	.clkdm_add_wkdep	= omap2_clkdm_add_wkdep,
-	.clkdm_del_wkdep	= omap2_clkdm_del_wkdep,
-	.clkdm_read_wkdep	= omap2_clkdm_read_wkdep,
-	.clkdm_clear_all_wkdeps	= omap2_clkdm_clear_all_wkdeps,
-	.clkdm_add_sleepdep	= omap3_clkdm_add_sleepdep,
-	.clkdm_del_sleepdep	= omap3_clkdm_del_sleepdep,
-	.clkdm_read_sleepdep	= omap3_clkdm_read_sleepdep,
-	.clkdm_clear_all_sleepdeps	= omap3_clkdm_clear_all_sleepdeps,
-	.clkdm_sleep		= omap3_clkdm_sleep,
-	.clkdm_wakeup		= omap3_clkdm_wakeup,
-	.clkdm_allow_idle	= omap3_clkdm_allow_idle,
-	.clkdm_deny_idle	= omap3_clkdm_deny_idle,
-	.clkdm_clk_enable	= omap3xxx_clkdm_clk_enable,
-	.clkdm_clk_disable	= omap3xxx_clkdm_clk_disable,
-};

arch/arm/mach-omap2/clockdomain33xx.c

@@ -1,74 +0,0 @@
-/*
- * AM33XX clockdomain control
- *
- * Copyright (C) 2011-2012 Texas Instruments Incorporated - http://www.ti.com/
- * Vaibhav Hiremath <hvaibhav@ti.com>
- *
- * Derived from mach-omap2/clockdomain44xx.c written by Rajendra Nayak
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <linux/kernel.h>
-
-#include "clockdomain.h"
-#include "cm33xx.h"
-
-
-static int am33xx_clkdm_sleep(struct clockdomain *clkdm)
-{
-	am33xx_cm_clkdm_force_sleep(clkdm->cm_inst, clkdm->clkdm_offs);
-	return 0;
-}
-
-static int am33xx_clkdm_wakeup(struct clockdomain *clkdm)
-{
-	am33xx_cm_clkdm_force_wakeup(clkdm->cm_inst, clkdm->clkdm_offs);
-	return 0;
-}
-
-static void am33xx_clkdm_allow_idle(struct clockdomain *clkdm)
-{
-	am33xx_cm_clkdm_enable_hwsup(clkdm->cm_inst, clkdm->clkdm_offs);
-}
-
-static void am33xx_clkdm_deny_idle(struct clockdomain *clkdm)
-{
-	am33xx_cm_clkdm_disable_hwsup(clkdm->cm_inst, clkdm->clkdm_offs);
-}
-
-static int am33xx_clkdm_clk_enable(struct clockdomain *clkdm)
-{
-	if (clkdm->flags & CLKDM_CAN_FORCE_WAKEUP)
-		return am33xx_clkdm_wakeup(clkdm);
-
-	return 0;
-}
-
-static int am33xx_clkdm_clk_disable(struct clockdomain *clkdm)
-{
-	bool hwsup = false;
-
-	hwsup = am33xx_cm_is_clkdm_in_hwsup(clkdm->cm_inst, clkdm->clkdm_offs);
-
-	if (!hwsup && (clkdm->flags & CLKDM_CAN_FORCE_SLEEP))
-		am33xx_clkdm_sleep(clkdm);
-
-	return 0;
-}
-
-struct clkdm_ops am33xx_clkdm_operations = {
-	.clkdm_sleep		= am33xx_clkdm_sleep,
-	.clkdm_wakeup		= am33xx_clkdm_wakeup,
-	.clkdm_allow_idle	= am33xx_clkdm_allow_idle,
-	.clkdm_deny_idle	= am33xx_clkdm_deny_idle,
-	.clkdm_clk_enable	= am33xx_clkdm_clk_enable,
-	.clkdm_clk_disable	= am33xx_clkdm_clk_disable,
-};

arch/arm/mach-omap2/clockdomain44xx.c

@@ -1,151 +0,0 @@
-/*
- * OMAP4 clockdomain control
- *
- * Copyright (C) 2008-2010 Texas Instruments, Inc.
- * Copyright (C) 2008-2010 Nokia Corporation
- *
- * Derived from mach-omap2/clockdomain.c written by Paul Walmsley
- * Rajendra Nayak <rnayak@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include "clockdomain.h"
-#include "cminst44xx.h"
-#include "cm44xx.h"
-
-static int omap4_clkdm_add_wkup_sleep_dep(struct clockdomain *clkdm1,
-					struct clockdomain *clkdm2)
-{
-	omap4_cminst_set_inst_reg_bits((1 << clkdm2->dep_bit),
-					clkdm1->prcm_partition,
-					clkdm1->cm_inst, clkdm1->clkdm_offs +
-					OMAP4_CM_STATICDEP);
-	return 0;
-}
-
-static int omap4_clkdm_del_wkup_sleep_dep(struct clockdomain *clkdm1,
-					struct clockdomain *clkdm2)
-{
-	omap4_cminst_clear_inst_reg_bits((1 << clkdm2->dep_bit),
-					clkdm1->prcm_partition,
-					clkdm1->cm_inst, clkdm1->clkdm_offs +
-					OMAP4_CM_STATICDEP);
-	return 0;
-}
-
-static int omap4_clkdm_read_wkup_sleep_dep(struct clockdomain *clkdm1,
-					struct clockdomain *clkdm2)
-{
-	return omap4_cminst_read_inst_reg_bits(clkdm1->prcm_partition,
-					clkdm1->cm_inst, clkdm1->clkdm_offs +
-					OMAP4_CM_STATICDEP,
-					(1 << clkdm2->dep_bit));
-}
-
-static int omap4_clkdm_clear_all_wkup_sleep_deps(struct clockdomain *clkdm)
-{
-	struct clkdm_dep *cd;
-	u32 mask = 0;
-
-	if (!clkdm->prcm_partition)
-		return 0;
-
-	for (cd = clkdm->wkdep_srcs; cd && cd->clkdm_name; cd++) {
-		if (!cd->clkdm)
-			continue; /* only happens if data is erroneous */
-
-		mask |= 1 << cd->clkdm->dep_bit;
-		atomic_set(&cd->wkdep_usecount, 0);
-	}
-
-	omap4_cminst_clear_inst_reg_bits(mask, clkdm->prcm_partition,
-					clkdm->cm_inst, clkdm->clkdm_offs +
-					OMAP4_CM_STATICDEP);
-	return 0;
-}
-
-static int omap4_clkdm_sleep(struct clockdomain *clkdm)
-{
-	omap4_cminst_clkdm_enable_hwsup(clkdm->prcm_partition,
-					clkdm->cm_inst, clkdm->clkdm_offs);
-	return 0;
-}
-
-static int omap4_clkdm_wakeup(struct clockdomain *clkdm)
-{
-	omap4_cminst_clkdm_force_wakeup(clkdm->prcm_partition,
-					clkdm->cm_inst, clkdm->clkdm_offs);
-	return 0;
-}
-
-static void omap4_clkdm_allow_idle(struct clockdomain *clkdm)
-{
-	omap4_cminst_clkdm_enable_hwsup(clkdm->prcm_partition,
-					clkdm->cm_inst, clkdm->clkdm_offs);
-}
-
-static void omap4_clkdm_deny_idle(struct clockdomain *clkdm)
-{
-	if (clkdm->flags & CLKDM_CAN_FORCE_WAKEUP)
-		omap4_clkdm_wakeup(clkdm);
-	else
-		omap4_cminst_clkdm_disable_hwsup(clkdm->prcm_partition,
-						 clkdm->cm_inst,
-						 clkdm->clkdm_offs);
-}
-
-static int omap4_clkdm_clk_enable(struct clockdomain *clkdm)
-{
-	if (clkdm->flags & CLKDM_CAN_FORCE_WAKEUP)
-		return omap4_clkdm_wakeup(clkdm);
-
-	return 0;
-}
-
-static int omap4_clkdm_clk_disable(struct clockdomain *clkdm)
-{
-	bool hwsup = false;
-
-	if (!clkdm->prcm_partition)
-		return 0;
-
-	/*
-	 * The CLKDM_MISSING_IDLE_REPORTING flag documentation has
-	 * more details on the unpleasant problem this is working
-	 * around
-	 */
-	if (clkdm->flags & CLKDM_MISSING_IDLE_REPORTING &&
-	    !(clkdm->flags & CLKDM_CAN_FORCE_SLEEP)) {
-		omap4_clkdm_allow_idle(clkdm);
-		return 0;
-	}
-
-	hwsup = omap4_cminst_is_clkdm_in_hwsup(clkdm->prcm_partition,
-					clkdm->cm_inst, clkdm->clkdm_offs);
-
-	if (!hwsup && (clkdm->flags & CLKDM_CAN_FORCE_SLEEP))
-		omap4_clkdm_sleep(clkdm);
-
-	return 0;
-}
-
-struct clkdm_ops omap4_clkdm_operations = {
-	.clkdm_add_wkdep	= omap4_clkdm_add_wkup_sleep_dep,
-	.clkdm_del_wkdep	= omap4_clkdm_del_wkup_sleep_dep,
-	.clkdm_read_wkdep	= omap4_clkdm_read_wkup_sleep_dep,
-	.clkdm_clear_all_wkdeps	= omap4_clkdm_clear_all_wkup_sleep_deps,
-	.clkdm_add_sleepdep	= omap4_clkdm_add_wkup_sleep_dep,
-	.clkdm_del_sleepdep	= omap4_clkdm_del_wkup_sleep_dep,
-	.clkdm_read_sleepdep	= omap4_clkdm_read_wkup_sleep_dep,
-	.clkdm_clear_all_sleepdeps	= omap4_clkdm_clear_all_wkup_sleep_deps,
-	.clkdm_sleep		= omap4_clkdm_sleep,
-	.clkdm_wakeup		= omap4_clkdm_wakeup,
-	.clkdm_allow_idle	= omap4_clkdm_allow_idle,
-	.clkdm_deny_idle	= omap4_clkdm_deny_idle,
-	.clkdm_clk_enable	= omap4_clkdm_clk_enable,
-	.clkdm_clk_disable	= omap4_clkdm_clk_disable,
-};

arch/arm/mach-omap2/cm-regbits-24xx.h

@@ -333,7 +333,9 @@
 #define OMAP24XX_EN_DPLL_MASK				(0x3 << 0)
 
 /* CM_IDLEST_CKGEN */
+#define OMAP24XX_ST_54M_APLL_SHIFT			9
 #define OMAP24XX_ST_54M_APLL_MASK			(1 << 9)
+#define OMAP24XX_ST_96M_APLL_SHIFT			8
 #define OMAP24XX_ST_96M_APLL_MASK			(1 << 8)
 #define OMAP24XX_ST_54M_CLK_MASK			(1 << 6)
 #define OMAP24XX_ST_12M_CLK_MASK			(1 << 5)

arch/arm/mach-omap2/cm.h

@@ -1,7 +1,7 @@
 /*
  * OMAP2+ Clock Management prototypes
  *
- * Copyright (C) 2007-2009 Texas Instruments, Inc.
+ * Copyright (C) 2007-2009, 2012 Texas Instruments, Inc.
  * Copyright (C) 2007-2009 Nokia Corporation
  *
  * Written by Paul Walmsley
@@ -22,6 +22,12 @@
  */
 #define MAX_MODULE_READY_TIME		2000
 
+# ifndef __ASSEMBLER__
+extern void __iomem *cm_base;
+extern void __iomem *cm2_base;
+extern void omap2_set_globals_cm(void __iomem *cm, void __iomem *cm2);
+# endif
+
 /*
  * MAX_MODULE_DISABLE_TIME: max duration in microseconds to wait for
  * the PRCM to request that a module enter the inactive state in the
@@ -33,4 +39,26 @@
  */
 #define MAX_MODULE_DISABLE_TIME		5000
 
+# ifndef __ASSEMBLER__
+
+/**
+ * struct cm_ll_data - fn ptrs to per-SoC CM function implementations
+ * @split_idlest_reg: ptr to the SoC CM-specific split_idlest_reg impl
+ * @wait_module_ready: ptr to the SoC CM-specific wait_module_ready impl
+ */
+struct cm_ll_data {
+	int (*split_idlest_reg)(void __iomem *idlest_reg, s16 *prcm_inst,
+				u8 *idlest_reg_id);
+	int (*wait_module_ready)(s16 prcm_mod, u8 idlest_id, u8 idlest_shift);
+};
+
+extern int cm_split_idlest_reg(void __iomem *idlest_reg, s16 *prcm_inst,
+			       u8 *idlest_reg_id);
+extern int cm_wait_module_ready(s16 prcm_mod, u8 idlest_id, u8 idlest_shift);
+
+extern int cm_register(struct cm_ll_data *cld);
+extern int cm_unregister(struct cm_ll_data *cld);
+
+# endif
+
 #endif

arch/arm/mach-omap2/cm2xxx.c

@@ -0,0 +1,381 @@
+/*
+ * OMAP2xxx CM module functions
+ *
+ * Copyright (C) 2009 Nokia Corporation
+ * Copyright (C) 2008-2010, 2012 Texas Instruments, Inc.
+ * Paul Walmsley
+ * Rajendra Nayak <rnayak@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/io.h>
+
+#include "soc.h"
+#include "iomap.h"
+#include "common.h"
+#include "prm2xxx.h"
+#include "cm.h"
+#include "cm2xxx.h"
+#include "cm-regbits-24xx.h"
+#include "clockdomain.h"
+
+/* CM_AUTOIDLE_PLL.AUTO_* bit values for DPLLs */
+#define DPLL_AUTOIDLE_DISABLE				0x0
+#define OMAP2XXX_DPLL_AUTOIDLE_LOW_POWER_STOP		0x3
+
+/* CM_AUTOIDLE_PLL.AUTO_* bit values for APLLs (OMAP2xxx only) */
+#define OMAP2XXX_APLL_AUTOIDLE_DISABLE			0x0
+#define OMAP2XXX_APLL_AUTOIDLE_LOW_POWER_STOP		0x3
+
+/* CM_IDLEST_PLL bit value offset for APLLs (OMAP2xxx only) */
+#define EN_APLL_LOCKED					3
+
+static const u8 omap2xxx_cm_idlest_offs[] = {
+	CM_IDLEST1, CM_IDLEST2, OMAP2430_CM_IDLEST3, OMAP24XX_CM_IDLEST4
+};
+
+/*
+ *
+ */
+
+static void _write_clktrctrl(u8 c, s16 module, u32 mask)
+{
+	u32 v;
+
+	v = omap2_cm_read_mod_reg(module, OMAP2_CM_CLKSTCTRL);
+	v &= ~mask;
+	v |= c << __ffs(mask);
+	omap2_cm_write_mod_reg(v, module, OMAP2_CM_CLKSTCTRL);
+}
+
+bool omap2xxx_cm_is_clkdm_in_hwsup(s16 module, u32 mask)
+{
+	u32 v;
+
+	v = omap2_cm_read_mod_reg(module, OMAP2_CM_CLKSTCTRL);
+	v &= mask;
+	v >>= __ffs(mask);
+
+	return (v == OMAP24XX_CLKSTCTRL_ENABLE_AUTO) ? 1 : 0;
+}
+
+void omap2xxx_cm_clkdm_enable_hwsup(s16 module, u32 mask)
+{
+	_write_clktrctrl(OMAP24XX_CLKSTCTRL_ENABLE_AUTO, module, mask);
+}
+
+void omap2xxx_cm_clkdm_disable_hwsup(s16 module, u32 mask)
+{
+	_write_clktrctrl(OMAP24XX_CLKSTCTRL_DISABLE_AUTO, module, mask);
+}
+
+/*
+ * DPLL autoidle control
+ */
+
+static void _omap2xxx_set_dpll_autoidle(u8 m)
+{
+	u32 v;
+
+	v = omap2_cm_read_mod_reg(PLL_MOD, CM_AUTOIDLE);
+	v &= ~OMAP24XX_AUTO_DPLL_MASK;
+	v |= m << OMAP24XX_AUTO_DPLL_SHIFT;
+	omap2_cm_write_mod_reg(v, PLL_MOD, CM_AUTOIDLE);
+}
+
+void omap2xxx_cm_set_dpll_disable_autoidle(void)
+{
+	_omap2xxx_set_dpll_autoidle(OMAP2XXX_DPLL_AUTOIDLE_LOW_POWER_STOP);
+}
+
+void omap2xxx_cm_set_dpll_auto_low_power_stop(void)
+{
+	_omap2xxx_set_dpll_autoidle(DPLL_AUTOIDLE_DISABLE);
+}
+
+/*
+ * APLL control
+ */
+
+static void _omap2xxx_set_apll_autoidle(u8 m, u32 mask)
+{
+	u32 v;
+
+	v = omap2_cm_read_mod_reg(PLL_MOD, CM_AUTOIDLE);
+	v &= ~mask;
+	v |= m << __ffs(mask);
+	omap2_cm_write_mod_reg(v, PLL_MOD, CM_AUTOIDLE);
+}
+
+void omap2xxx_cm_set_apll54_disable_autoidle(void)
+{
+	_omap2xxx_set_apll_autoidle(OMAP2XXX_APLL_AUTOIDLE_LOW_POWER_STOP,
+				    OMAP24XX_AUTO_54M_MASK);
+}
+
+void omap2xxx_cm_set_apll54_auto_low_power_stop(void)
+{
+	_omap2xxx_set_apll_autoidle(OMAP2XXX_APLL_AUTOIDLE_DISABLE,
+				    OMAP24XX_AUTO_54M_MASK);
+}
+
+void omap2xxx_cm_set_apll96_disable_autoidle(void)
+{
+	_omap2xxx_set_apll_autoidle(OMAP2XXX_APLL_AUTOIDLE_LOW_POWER_STOP,
+				    OMAP24XX_AUTO_96M_MASK);
+}
+
+void omap2xxx_cm_set_apll96_auto_low_power_stop(void)
+{
+	_omap2xxx_set_apll_autoidle(OMAP2XXX_APLL_AUTOIDLE_DISABLE,
+				    OMAP24XX_AUTO_96M_MASK);
+}
+
+/* Enable an APLL if off */
+static int _omap2xxx_apll_enable(u8 enable_bit, u8 status_bit)
+{
+	u32 v, m;
+
+	m = EN_APLL_LOCKED << enable_bit;
+
+	v = omap2_cm_read_mod_reg(PLL_MOD, CM_CLKEN);
+	if (v & m)
+		return 0;   /* apll already enabled */
+
+	v |= m;
+	omap2_cm_write_mod_reg(v, PLL_MOD, CM_CLKEN);
+
+	omap2xxx_cm_wait_module_ready(PLL_MOD, 1, status_bit);
+
+	/*
+	 * REVISIT: Should we return an error code if
+	 * omap2xxx_cm_wait_module_ready() fails?
+	 */
+	return 0;
+}
+
+/* Stop APLL */
+static void _omap2xxx_apll_disable(u8 enable_bit)
+{
+	u32 v;
+
+	v = omap2_cm_read_mod_reg(PLL_MOD, CM_CLKEN);
+	v &= ~(EN_APLL_LOCKED << enable_bit);
+	omap2_cm_write_mod_reg(v, PLL_MOD, CM_CLKEN);
+}
+
+/* Enable an APLL if off */
+int omap2xxx_cm_apll54_enable(void)
+{
+	return _omap2xxx_apll_enable(OMAP24XX_EN_54M_PLL_SHIFT,
+				     OMAP24XX_ST_54M_APLL_SHIFT);
+}
+
+/* Enable an APLL if off */
+int omap2xxx_cm_apll96_enable(void)
+{
+	return _omap2xxx_apll_enable(OMAP24XX_EN_96M_PLL_SHIFT,
+				     OMAP24XX_ST_96M_APLL_SHIFT);
+}
+
+/* Stop APLL */
+void omap2xxx_cm_apll54_disable(void)
+{
+	_omap2xxx_apll_disable(OMAP24XX_EN_54M_PLL_SHIFT);
+}
+
+/* Stop APLL */
+void omap2xxx_cm_apll96_disable(void)
+{
+	_omap2xxx_apll_disable(OMAP24XX_EN_96M_PLL_SHIFT);
+}
+
+/**
+ * omap2xxx_cm_split_idlest_reg - split CM_IDLEST reg addr into its components
+ * @idlest_reg: CM_IDLEST* virtual address
+ * @prcm_inst: pointer to an s16 to return the PRCM instance offset
+ * @idlest_reg_id: pointer to a u8 to return the CM_IDLESTx register ID
+ *
+ * XXX This function is only needed until absolute register addresses are
+ * removed from the OMAP struct clk records.
+ */
+int omap2xxx_cm_split_idlest_reg(void __iomem *idlest_reg, s16 *prcm_inst,
+				 u8 *idlest_reg_id)
+{
+	unsigned long offs;
+	u8 idlest_offs;
+	int i;
+
+	if (idlest_reg < cm_base || idlest_reg > (cm_base + 0x0fff))
+		return -EINVAL;
+
+	idlest_offs = (unsigned long)idlest_reg & 0xff;
+	for (i = 0; i < ARRAY_SIZE(omap2xxx_cm_idlest_offs); i++) {
+		if (idlest_offs == omap2xxx_cm_idlest_offs[i]) {
+			*idlest_reg_id = i + 1;
+			break;
+		}
+	}
+
+	if (i == ARRAY_SIZE(omap2xxx_cm_idlest_offs))
+		return -EINVAL;
+
+	offs = idlest_reg - cm_base;
+	offs &= 0xff00;
+	*prcm_inst = offs;
+
+	return 0;
+}
+
+/*
+ *
+ */
+
+/**
+ * omap2xxx_cm_wait_module_ready - wait for a module to leave idle or standby
+ * @prcm_mod: PRCM module offset
+ * @idlest_id: CM_IDLESTx register ID (i.e., x = 1, 2, 3)
+ * @idlest_shift: shift of the bit in the CM_IDLEST* register to check
+ *
+ * Wait for the PRCM to indicate that the module identified by
+ * (@prcm_mod, @idlest_id, @idlest_shift) is clocked.  Return 0 upon
+ * success or -EBUSY if the module doesn't enable in time.
+ */
+int omap2xxx_cm_wait_module_ready(s16 prcm_mod, u8 idlest_id, u8 idlest_shift)
+{
+	int ena = 0, i = 0;
+	u8 cm_idlest_reg;
+	u32 mask;
+
+	if (!idlest_id || (idlest_id > ARRAY_SIZE(omap2xxx_cm_idlest_offs)))
+		return -EINVAL;
+
+	cm_idlest_reg = omap2xxx_cm_idlest_offs[idlest_id - 1];
+
+	mask = 1 << idlest_shift;
+	ena = mask;
+
+	omap_test_timeout(((omap2_cm_read_mod_reg(prcm_mod, cm_idlest_reg) &
+			    mask) == ena), MAX_MODULE_READY_TIME, i);
+
+	return (i < MAX_MODULE_READY_TIME) ? 0 : -EBUSY;
+}
+
+/* Clockdomain low-level functions */
+
+static void omap2xxx_clkdm_allow_idle(struct clockdomain *clkdm)
+{
+	if (atomic_read(&clkdm->usecount) > 0)
+		_clkdm_add_autodeps(clkdm);
+
+	omap2xxx_cm_clkdm_enable_hwsup(clkdm->pwrdm.ptr->prcm_offs,
+				       clkdm->clktrctrl_mask);
+}
+
+static void omap2xxx_clkdm_deny_idle(struct clockdomain *clkdm)
+{
+	omap2xxx_cm_clkdm_disable_hwsup(clkdm->pwrdm.ptr->prcm_offs,
+					clkdm->clktrctrl_mask);
+
+	if (atomic_read(&clkdm->usecount) > 0)
+		_clkdm_del_autodeps(clkdm);
+}
+
+static int omap2xxx_clkdm_clk_enable(struct clockdomain *clkdm)
+{
+	bool hwsup = false;
+
+	if (!clkdm->clktrctrl_mask)
+		return 0;
+
+	hwsup = omap2xxx_cm_is_clkdm_in_hwsup(clkdm->pwrdm.ptr->prcm_offs,
+					      clkdm->clktrctrl_mask);
+
+	if (hwsup) {
+		/* Disable HW transitions when we are changing deps */
+		omap2xxx_cm_clkdm_disable_hwsup(clkdm->pwrdm.ptr->prcm_offs,
+						clkdm->clktrctrl_mask);
+		_clkdm_add_autodeps(clkdm);
+		omap2xxx_cm_clkdm_enable_hwsup(clkdm->pwrdm.ptr->prcm_offs,
+					       clkdm->clktrctrl_mask);
+	} else {
+		if (clkdm->flags & CLKDM_CAN_FORCE_WAKEUP)
+			omap2xxx_clkdm_wakeup(clkdm);
+	}
+
+	return 0;
+}
+
+static int omap2xxx_clkdm_clk_disable(struct clockdomain *clkdm)
+{
+	bool hwsup = false;
+
+	if (!clkdm->clktrctrl_mask)
+		return 0;
+
+	hwsup = omap2xxx_cm_is_clkdm_in_hwsup(clkdm->pwrdm.ptr->prcm_offs,
+					      clkdm->clktrctrl_mask);
+
+	if (hwsup) {
+		/* Disable HW transitions when we are changing deps */
+		omap2xxx_cm_clkdm_disable_hwsup(clkdm->pwrdm.ptr->prcm_offs,
+						clkdm->clktrctrl_mask);
+		_clkdm_del_autodeps(clkdm);
+		omap2xxx_cm_clkdm_enable_hwsup(clkdm->pwrdm.ptr->prcm_offs,
+					       clkdm->clktrctrl_mask);
+	} else {
+		if (clkdm->flags & CLKDM_CAN_FORCE_SLEEP)
+			omap2xxx_clkdm_sleep(clkdm);
+	}
+
+	return 0;
+}
+
+struct clkdm_ops omap2_clkdm_operations = {
+	.clkdm_add_wkdep	= omap2_clkdm_add_wkdep,
+	.clkdm_del_wkdep	= omap2_clkdm_del_wkdep,
+	.clkdm_read_wkdep	= omap2_clkdm_read_wkdep,
+	.clkdm_clear_all_wkdeps	= omap2_clkdm_clear_all_wkdeps,
+	.clkdm_sleep		= omap2xxx_clkdm_sleep,
+	.clkdm_wakeup		= omap2xxx_clkdm_wakeup,
+	.clkdm_allow_idle	= omap2xxx_clkdm_allow_idle,
+	.clkdm_deny_idle	= omap2xxx_clkdm_deny_idle,
+	.clkdm_clk_enable	= omap2xxx_clkdm_clk_enable,
+	.clkdm_clk_disable	= omap2xxx_clkdm_clk_disable,
+};
+
+/*
+ *
+ */
+
+static struct cm_ll_data omap2xxx_cm_ll_data = {
+	.split_idlest_reg	= &omap2xxx_cm_split_idlest_reg,
+	.wait_module_ready	= &omap2xxx_cm_wait_module_ready,
+};
+
+int __init omap2xxx_cm_init(void)
+{
+	if (!cpu_is_omap24xx())
+		return 0;
+
+	return cm_register(&omap2xxx_cm_ll_data);
+}
+
+static void __exit omap2xxx_cm_exit(void)
+{
+	if (!cpu_is_omap24xx())
+		return;
+
+	/* Should never happen */
+	WARN(cm_unregister(&omap2xxx_cm_ll_data),
+	     "%s: cm_ll_data function pointer mismatch\n", __func__);
+}
+__exitcall(omap2xxx_cm_exit);

arch/arm/mach-omap2/cm2xxx.h

@@ -0,0 +1,70 @@
+/*
+ * OMAP2xxx Clock Management (CM) register definitions
+ *
+ * Copyright (C) 2007-2009, 2012 Texas Instruments, Inc.
+ * Copyright (C) 2007-2010 Nokia Corporation
+ * Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * The CM hardware modules on the OMAP2/3 are quite similar to each
+ * other.  The CM modules/instances on OMAP4 are quite different, so
+ * they are handled in a separate file.
+ */
+#ifndef __ARCH_ASM_MACH_OMAP2_CM2XXX_H
+#define __ARCH_ASM_MACH_OMAP2_CM2XXX_H
+
+#include "prcm-common.h"
+#include "cm2xxx_3xxx.h"
+
+#define OMAP2420_CM_REGADDR(module, reg)				\
+			OMAP2_L4_IO_ADDRESS(OMAP2420_CM_BASE + (module) + (reg))
+#define OMAP2430_CM_REGADDR(module, reg)				\
+			OMAP2_L4_IO_ADDRESS(OMAP2430_CM_BASE + (module) + (reg))
+
+/*
+ * Module specific CM register offsets from CM_BASE + domain offset
+ * Use cm_{read,write}_mod_reg() with these registers.
+ * These register offsets generally appear in more than one PRCM submodule.
+ */
+
+/* OMAP2-specific register offsets */
+
+#define OMAP24XX_CM_FCLKEN2				0x0004
+#define OMAP24XX_CM_ICLKEN4				0x001c
+#define OMAP24XX_CM_AUTOIDLE4				0x003c
+#define OMAP24XX_CM_IDLEST4				0x002c
+
+/* CM_IDLEST bit field values to indicate deasserted IdleReq */
+
+#define OMAP24XX_CM_IDLEST_VAL				0
+
+
+/* Clock management domain register get/set */
+
+#ifndef __ASSEMBLER__
+
+extern void omap2xxx_cm_clkdm_enable_hwsup(s16 module, u32 mask);
+extern void omap2xxx_cm_clkdm_disable_hwsup(s16 module, u32 mask);
+
+extern void omap2xxx_cm_set_dpll_disable_autoidle(void);
+extern void omap2xxx_cm_set_dpll_auto_low_power_stop(void);
+
+extern void omap2xxx_cm_set_apll54_disable_autoidle(void);
+extern void omap2xxx_cm_set_apll54_auto_low_power_stop(void);
+extern void omap2xxx_cm_set_apll96_disable_autoidle(void);
+extern void omap2xxx_cm_set_apll96_auto_low_power_stop(void);
+
+extern bool omap2xxx_cm_is_clkdm_in_hwsup(s16 module, u32 mask);
+extern int omap2xxx_cm_wait_module_ready(s16 prcm_mod, u8 idlest_id,
+					 u8 idlest_shift);
+extern int omap2xxx_cm_split_idlest_reg(void __iomem *idlest_reg,
+					s16 *prcm_inst, u8 *idlest_reg_id);
+
+extern int __init omap2xxx_cm_init(void);
+
+#endif
+
+#endif

arch/arm/mach-omap2/cm2xxx_3xxx.h

@@ -16,28 +16,7 @@
 #ifndef __ARCH_ASM_MACH_OMAP2_CM2XXX_3XXX_H
 #define __ARCH_ASM_MACH_OMAP2_CM2XXX_3XXX_H
 
-#include "prcm-common.h"
-
-#define OMAP2420_CM_REGADDR(module, reg)				\
-			OMAP2_L4_IO_ADDRESS(OMAP2420_CM_BASE + (module) + (reg))
-#define OMAP2430_CM_REGADDR(module, reg)				\
-			OMAP2_L4_IO_ADDRESS(OMAP2430_CM_BASE + (module) + (reg))
-#define OMAP34XX_CM_REGADDR(module, reg)				\
-			OMAP2_L4_IO_ADDRESS(OMAP3430_CM_BASE + (module) + (reg))
-
-
-/*
- * OMAP3-specific global CM registers
- * Use cm_{read,write}_reg() with these registers.
- * These registers appear once per CM module.
- */
-
-#define OMAP3430_CM_REVISION		OMAP34XX_CM_REGADDR(OCP_MOD, 0x0000)
-#define OMAP3430_CM_SYSCONFIG		OMAP34XX_CM_REGADDR(OCP_MOD, 0x0010)
-#define OMAP3430_CM_POLCTRL		OMAP34XX_CM_REGADDR(OCP_MOD, 0x009c)
-
-#define OMAP3_CM_CLKOUT_CTRL_OFFSET	0x0070
-#define OMAP3430_CM_CLKOUT_CTRL		OMAP_CM_REGADDR(OMAP3430_CCR_MOD, 0x0070)
+#include "cm.h"
 
 /*
  * Module specific CM register offsets from CM_BASE + domain offset
@@ -57,6 +36,7 @@
 #define CM_IDLEST					0x0020
 #define CM_IDLEST1					CM_IDLEST
 #define CM_IDLEST2					0x0024
+#define OMAP2430_CM_IDLEST3				0x0028
 #define CM_AUTOIDLE					0x0030
 #define CM_AUTOIDLE1					CM_AUTOIDLE
 #define CM_AUTOIDLE2					0x0034
@@ -66,70 +46,60 @@
 #define CM_CLKSEL2					0x0044
 #define OMAP2_CM_CLKSTCTRL				0x0048
 
-/* OMAP2-specific register offsets */
-
-#define OMAP24XX_CM_FCLKEN2				0x0004
-#define OMAP24XX_CM_ICLKEN4				0x001c
-#define OMAP24XX_CM_AUTOIDLE4				0x003c
-#define OMAP24XX_CM_IDLEST4				0x002c
-
-#define OMAP2430_CM_IDLEST3				0x0028
-
-/* OMAP3-specific register offsets */
-
-#define OMAP3430_CM_CLKEN_PLL				0x0004
-#define OMAP3430ES2_CM_CLKEN2				0x0004
-#define OMAP3430ES2_CM_FCLKEN3				0x0008
-#define OMAP3430_CM_IDLEST_PLL				CM_IDLEST2
-#define OMAP3430_CM_AUTOIDLE_PLL			CM_AUTOIDLE2
-#define OMAP3430ES2_CM_AUTOIDLE2_PLL			CM_AUTOIDLE2
-#define OMAP3430_CM_CLKSEL1				CM_CLKSEL
-#define OMAP3430_CM_CLKSEL1_PLL				CM_CLKSEL
-#define OMAP3430_CM_CLKSEL2_PLL				CM_CLKSEL2
-#define OMAP3430_CM_SLEEPDEP				CM_CLKSEL2
-#define OMAP3430_CM_CLKSEL3				OMAP2_CM_CLKSTCTRL
-#define OMAP3430_CM_CLKSTST				0x004c
-#define OMAP3430ES2_CM_CLKSEL4				0x004c
-#define OMAP3430ES2_CM_CLKSEL5				0x0050
-#define OMAP3430_CM_CLKSEL2_EMU				0x0050
-#define OMAP3430_CM_CLKSEL3_EMU				0x0054
-
-
-/* CM_IDLEST bit field values to indicate deasserted IdleReq */
-
-#define OMAP24XX_CM_IDLEST_VAL				0
-#define OMAP34XX_CM_IDLEST_VAL				1
-
-
-/* Clock management domain register get/set */
-
 #ifndef __ASSEMBLER__
 
-extern u32 omap2_cm_read_mod_reg(s16 module, u16 idx);
-extern void omap2_cm_write_mod_reg(u32 val, s16 module, u16 idx);
-extern u32 omap2_cm_rmw_mod_reg_bits(u32 mask, u32 bits, s16 module, s16 idx);
+#include <linux/io.h>
 
-extern int omap2_cm_wait_module_ready(s16 prcm_mod, u8 idlest_id,
-				      u8 idlest_shift);
-extern u32 omap2_cm_set_mod_reg_bits(u32 bits, s16 module, s16 idx);
-extern u32 omap2_cm_clear_mod_reg_bits(u32 bits, s16 module, s16 idx);
+static inline u32 omap2_cm_read_mod_reg(s16 module, u16 idx)
+{
+	return __raw_readl(cm_base + module + idx);
+}
 
-extern bool omap2_cm_is_clkdm_in_hwsup(s16 module, u32 mask);
-extern void omap2xxx_cm_clkdm_enable_hwsup(s16 module, u32 mask);
-extern void omap2xxx_cm_clkdm_disable_hwsup(s16 module, u32 mask);
+static inline void omap2_cm_write_mod_reg(u32 val, s16 module, u16 idx)
+{
+	__raw_writel(val, cm_base + module + idx);
+}
 
-extern void omap3xxx_cm_clkdm_enable_hwsup(s16 module, u32 mask);
-extern void omap3xxx_cm_clkdm_disable_hwsup(s16 module, u32 mask);
-extern void omap3xxx_cm_clkdm_force_sleep(s16 module, u32 mask);
-extern void omap3xxx_cm_clkdm_force_wakeup(s16 module, u32 mask);
+/* Read-modify-write a register in a CM module. Caller must lock */
+static inline u32 omap2_cm_rmw_mod_reg_bits(u32 mask, u32 bits, s16 module,
+					    s16 idx)
+{
+	u32 v;
 
-extern void omap2xxx_cm_set_dpll_disable_autoidle(void);
-extern void omap2xxx_cm_set_dpll_auto_low_power_stop(void);
+	v = omap2_cm_read_mod_reg(module, idx);
+	v &= ~mask;
+	v |= bits;
+	omap2_cm_write_mod_reg(v, module, idx);
 
-extern void omap2xxx_cm_set_apll54_disable_autoidle(void);
-extern void omap2xxx_cm_set_apll54_auto_low_power_stop(void);
-extern void omap2xxx_cm_set_apll96_disable_autoidle(void);
-extern void omap2xxx_cm_set_apll96_auto_low_power_stop(void);
+	return v;
+}
+
+/* Read a CM register, AND it, and shift the result down to bit 0 */
+static inline u32 omap2_cm_read_mod_bits_shift(s16 domain, s16 idx, u32 mask)
+{
+	u32 v;
+
+	v = omap2_cm_read_mod_reg(domain, idx);
+	v &= mask;
+	v >>= __ffs(mask);
+
+	return v;
+}
+
+static inline u32 omap2_cm_set_mod_reg_bits(u32 bits, s16 module, s16 idx)
+{
+	return omap2_cm_rmw_mod_reg_bits(bits, bits, module, idx);
+}
+
+static inline u32 omap2_cm_clear_mod_reg_bits(u32 bits, s16 module, s16 idx)
+{
+	return omap2_cm_rmw_mod_reg_bits(bits, 0x0, module, idx);
+}
+
+extern int omap2xxx_cm_apll54_enable(void);
+extern void omap2xxx_cm_apll54_disable(void);
+extern int omap2xxx_cm_apll96_enable(void);
+extern void omap2xxx_cm_apll96_disable(void);
 
 #endif
 
@@ -146,11 +116,4 @@ extern void omap2xxx_cm_set_apll96_auto_low_power_stop(void);
 /* CM_IDLEST_GFX */
 #define OMAP_ST_GFX_MASK				(1 << 0)
 
-
-/* Function prototypes */
-# ifndef __ASSEMBLER__
-extern void omap3_cm_save_context(void);
-extern void omap3_cm_restore_context(void);
-# endif
-
 #endif

arch/arm/mach-omap2/cm33xx.c

@@ -22,6 +22,7 @@
 #include <linux/err.h>
 #include <linux/io.h>
 
+#include "clockdomain.h"
 #include "cm.h"
 #include "cm33xx.h"
 #include "cm-regbits-34xx.h"
@@ -309,3 +310,58 @@ void am33xx_cm_module_disable(u16 inst, s16 cdoffs, u16 clkctrl_offs)
 	v &= ~AM33XX_MODULEMODE_MASK;
 	am33xx_cm_write_reg(v, inst, clkctrl_offs);
 }
+
+/*
+ * Clockdomain low-level functions
+ */
+
+static int am33xx_clkdm_sleep(struct clockdomain *clkdm)
+{
+	am33xx_cm_clkdm_force_sleep(clkdm->cm_inst, clkdm->clkdm_offs);
+	return 0;
+}
+
+static int am33xx_clkdm_wakeup(struct clockdomain *clkdm)
+{
+	am33xx_cm_clkdm_force_wakeup(clkdm->cm_inst, clkdm->clkdm_offs);
+	return 0;
+}
+
+static void am33xx_clkdm_allow_idle(struct clockdomain *clkdm)
+{
+	am33xx_cm_clkdm_enable_hwsup(clkdm->cm_inst, clkdm->clkdm_offs);
+}
+
+static void am33xx_clkdm_deny_idle(struct clockdomain *clkdm)
+{
+	am33xx_cm_clkdm_disable_hwsup(clkdm->cm_inst, clkdm->clkdm_offs);
+}
+
+static int am33xx_clkdm_clk_enable(struct clockdomain *clkdm)
+{
+	if (clkdm->flags & CLKDM_CAN_FORCE_WAKEUP)
+		return am33xx_clkdm_wakeup(clkdm);
+
+	return 0;
+}
+
+static int am33xx_clkdm_clk_disable(struct clockdomain *clkdm)
+{
+	bool hwsup = false;
+
+	hwsup = am33xx_cm_is_clkdm_in_hwsup(clkdm->cm_inst, clkdm->clkdm_offs);
+
+	if (!hwsup && (clkdm->flags & CLKDM_CAN_FORCE_SLEEP))
+		am33xx_clkdm_sleep(clkdm);
+
+	return 0;
+}
+
+struct clkdm_ops am33xx_clkdm_operations = {
+	.clkdm_sleep		= am33xx_clkdm_sleep,
+	.clkdm_wakeup		= am33xx_clkdm_wakeup,
+	.clkdm_allow_idle	= am33xx_clkdm_allow_idle,
+	.clkdm_deny_idle	= am33xx_clkdm_deny_idle,
+	.clkdm_clk_enable	= am33xx_clkdm_clk_enable,
+	.clkdm_clk_disable	= am33xx_clkdm_clk_disable,
+};

arch/arm/mach-omap2/cm3xxx.c

@@ -1,8 +1,10 @@
 /*
- * OMAP2/3 CM module functions
+ * OMAP3xxx CM module functions
  *
  * Copyright (C) 2009 Nokia Corporation
+ * Copyright (C) 2008-2010, 2012 Texas Instruments, Inc.
  * Paul Walmsley
+ * Rajendra Nayak <rnayak@ti.com>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -12,8 +14,6 @@
 #include <linux/kernel.h>
 #include <linux/types.h>
 #include <linux/delay.h>
-#include <linux/spinlock.h>
-#include <linux/list.h>
 #include <linux/errno.h>
 #include <linux/err.h>
 #include <linux/io.h>
@@ -21,56 +21,16 @@
 #include "soc.h"
 #include "iomap.h"
 #include "common.h"
+#include "prm2xxx_3xxx.h"
 #include "cm.h"
-#include "cm2xxx_3xxx.h"
-#include "cm-regbits-24xx.h"
+#include "cm3xxx.h"
 #include "cm-regbits-34xx.h"
+#include "clockdomain.h"
 
-/* CM_AUTOIDLE_PLL.AUTO_* bit values for DPLLs */
-#define DPLL_AUTOIDLE_DISABLE				0x0
-#define OMAP2XXX_DPLL_AUTOIDLE_LOW_POWER_STOP		0x3
-
-/* CM_AUTOIDLE_PLL.AUTO_* bit values for APLLs (OMAP2xxx only) */
-#define OMAP2XXX_APLL_AUTOIDLE_DISABLE			0x0
-#define OMAP2XXX_APLL_AUTOIDLE_LOW_POWER_STOP		0x3
-
-static const u8 cm_idlest_offs[] = {
-	CM_IDLEST1, CM_IDLEST2, OMAP2430_CM_IDLEST3, OMAP24XX_CM_IDLEST4
+static const u8 omap3xxx_cm_idlest_offs[] = {
+	CM_IDLEST1, CM_IDLEST2, OMAP2430_CM_IDLEST3
 };
 
-u32 omap2_cm_read_mod_reg(s16 module, u16 idx)
-{
-	return __raw_readl(cm_base + module + idx);
-}
-
-void omap2_cm_write_mod_reg(u32 val, s16 module, u16 idx)
-{
-	__raw_writel(val, cm_base + module + idx);
-}
-
-/* Read-modify-write a register in a CM module. Caller must lock */
-u32 omap2_cm_rmw_mod_reg_bits(u32 mask, u32 bits, s16 module, s16 idx)
-{
-	u32 v;
-
-	v = omap2_cm_read_mod_reg(module, idx);
-	v &= ~mask;
-	v |= bits;
-	omap2_cm_write_mod_reg(v, module, idx);
-
-	return v;
-}
-
-u32 omap2_cm_set_mod_reg_bits(u32 bits, s16 module, s16 idx)
-{
-	return omap2_cm_rmw_mod_reg_bits(bits, bits, module, idx);
-}
-
-u32 omap2_cm_clear_mod_reg_bits(u32 bits, s16 module, s16 idx)
-{
-	return omap2_cm_rmw_mod_reg_bits(bits, 0x0, module, idx);
-}
-
 /*
  *
  */
@@ -85,33 +45,15 @@ static void _write_clktrctrl(u8 c, s16 module, u32 mask)
 	omap2_cm_write_mod_reg(v, module, OMAP2_CM_CLKSTCTRL);
 }
 
-bool omap2_cm_is_clkdm_in_hwsup(s16 module, u32 mask)
+bool omap3xxx_cm_is_clkdm_in_hwsup(s16 module, u32 mask)
 {
 	u32 v;
-	bool ret = 0;
-
-	BUG_ON(!cpu_is_omap24xx() && !cpu_is_omap34xx());
 
 	v = omap2_cm_read_mod_reg(module, OMAP2_CM_CLKSTCTRL);
 	v &= mask;
 	v >>= __ffs(mask);
 
-	if (cpu_is_omap24xx())
-		ret = (v == OMAP24XX_CLKSTCTRL_ENABLE_AUTO) ? 1 : 0;
-	else
-		ret = (v == OMAP34XX_CLKSTCTRL_ENABLE_AUTO) ? 1 : 0;
-
-	return ret;
-}
-
-void omap2xxx_cm_clkdm_enable_hwsup(s16 module, u32 mask)
-{
-	_write_clktrctrl(OMAP24XX_CLKSTCTRL_ENABLE_AUTO, module, mask);
-}
-
-void omap2xxx_cm_clkdm_disable_hwsup(s16 module, u32 mask)
-{
-	_write_clktrctrl(OMAP24XX_CLKSTCTRL_DISABLE_AUTO, module, mask);
+	return (v == OMAP34XX_CLKSTCTRL_ENABLE_AUTO) ? 1 : 0;
 }
 
 void omap3xxx_cm_clkdm_enable_hwsup(s16 module, u32 mask)
@@ -134,110 +76,248 @@ void omap3xxx_cm_clkdm_force_wakeup(s16 module, u32 mask)
 	_write_clktrctrl(OMAP34XX_CLKSTCTRL_FORCE_WAKEUP, module, mask);
 }
 
-/*
- * DPLL autoidle control
- */
-
-static void _omap2xxx_set_dpll_autoidle(u8 m)
-{
-	u32 v;
-
-	v = omap2_cm_read_mod_reg(PLL_MOD, CM_AUTOIDLE);
-	v &= ~OMAP24XX_AUTO_DPLL_MASK;
-	v |= m << OMAP24XX_AUTO_DPLL_SHIFT;
-	omap2_cm_write_mod_reg(v, PLL_MOD, CM_AUTOIDLE);
-}
-
-void omap2xxx_cm_set_dpll_disable_autoidle(void)
-{
-	_omap2xxx_set_dpll_autoidle(OMAP2XXX_DPLL_AUTOIDLE_LOW_POWER_STOP);
-}
-
-void omap2xxx_cm_set_dpll_auto_low_power_stop(void)
-{
-	_omap2xxx_set_dpll_autoidle(DPLL_AUTOIDLE_DISABLE);
-}
-
-/*
- * APLL autoidle control
- */
-
-static void _omap2xxx_set_apll_autoidle(u8 m, u32 mask)
-{
-	u32 v;
-
-	v = omap2_cm_read_mod_reg(PLL_MOD, CM_AUTOIDLE);
-	v &= ~mask;
-	v |= m << __ffs(mask);
-	omap2_cm_write_mod_reg(v, PLL_MOD, CM_AUTOIDLE);
-}
-
-void omap2xxx_cm_set_apll54_disable_autoidle(void)
-{
-	_omap2xxx_set_apll_autoidle(OMAP2XXX_APLL_AUTOIDLE_LOW_POWER_STOP,
-				    OMAP24XX_AUTO_54M_MASK);
-}
-
-void omap2xxx_cm_set_apll54_auto_low_power_stop(void)
-{
-	_omap2xxx_set_apll_autoidle(OMAP2XXX_APLL_AUTOIDLE_DISABLE,
-				    OMAP24XX_AUTO_54M_MASK);
-}
-
-void omap2xxx_cm_set_apll96_disable_autoidle(void)
-{
-	_omap2xxx_set_apll_autoidle(OMAP2XXX_APLL_AUTOIDLE_LOW_POWER_STOP,
-				    OMAP24XX_AUTO_96M_MASK);
-}
-
-void omap2xxx_cm_set_apll96_auto_low_power_stop(void)
-{
-	_omap2xxx_set_apll_autoidle(OMAP2XXX_APLL_AUTOIDLE_DISABLE,
-				    OMAP24XX_AUTO_96M_MASK);
-}
-
 /*
  *
  */
 
 /**
- * omap2_cm_wait_idlest_ready - wait for a module to leave idle or standby
+ * omap3xxx_cm_wait_module_ready - wait for a module to leave idle or standby
  * @prcm_mod: PRCM module offset
  * @idlest_id: CM_IDLESTx register ID (i.e., x = 1, 2, 3)
  * @idlest_shift: shift of the bit in the CM_IDLEST* register to check
  *
- * XXX document
+ * Wait for the PRCM to indicate that the module identified by
+ * (@prcm_mod, @idlest_id, @idlest_shift) is clocked.  Return 0 upon
+ * success or -EBUSY if the module doesn't enable in time.
  */
-int omap2_cm_wait_module_ready(s16 prcm_mod, u8 idlest_id, u8 idlest_shift)
+int omap3xxx_cm_wait_module_ready(s16 prcm_mod, u8 idlest_id, u8 idlest_shift)
 {
 	int ena = 0, i = 0;
 	u8 cm_idlest_reg;
 	u32 mask;
 
-	if (!idlest_id || (idlest_id > ARRAY_SIZE(cm_idlest_offs)))
+	if (!idlest_id || (idlest_id > ARRAY_SIZE(omap3xxx_cm_idlest_offs)))
 		return -EINVAL;
 
-	cm_idlest_reg = cm_idlest_offs[idlest_id - 1];
+	cm_idlest_reg = omap3xxx_cm_idlest_offs[idlest_id - 1];
 
 	mask = 1 << idlest_shift;
+	ena = 0;
 
-	if (cpu_is_omap24xx())
-		ena = mask;
-	else if (cpu_is_omap34xx())
-		ena = 0;
-	else
-		BUG();
-
-	omap_test_timeout(((omap2_cm_read_mod_reg(prcm_mod, cm_idlest_reg) & mask) == ena),
-			  MAX_MODULE_READY_TIME, i);
+	omap_test_timeout(((omap2_cm_read_mod_reg(prcm_mod, cm_idlest_reg) &
+			    mask) == ena), MAX_MODULE_READY_TIME, i);
 
 	return (i < MAX_MODULE_READY_TIME) ? 0 : -EBUSY;
 }
 
+/**
+ * omap3xxx_cm_split_idlest_reg - split CM_IDLEST reg addr into its components
+ * @idlest_reg: CM_IDLEST* virtual address
+ * @prcm_inst: pointer to an s16 to return the PRCM instance offset
+ * @idlest_reg_id: pointer to a u8 to return the CM_IDLESTx register ID
+ *
+ * XXX This function is only needed until absolute register addresses are
+ * removed from the OMAP struct clk records.
+ */
+int omap3xxx_cm_split_idlest_reg(void __iomem *idlest_reg, s16 *prcm_inst,
+				 u8 *idlest_reg_id)
+{
+	unsigned long offs;
+	u8 idlest_offs;
+	int i;
+
+	if (idlest_reg < (cm_base + OMAP3430_IVA2_MOD) ||
+	    idlest_reg > (cm_base + 0x1ffff))
+		return -EINVAL;
+
+	idlest_offs = (unsigned long)idlest_reg & 0xff;
+	for (i = 0; i < ARRAY_SIZE(omap3xxx_cm_idlest_offs); i++) {
+		if (idlest_offs == omap3xxx_cm_idlest_offs[i]) {
+			*idlest_reg_id = i + 1;
+			break;
+		}
+	}
+
+	if (i == ARRAY_SIZE(omap3xxx_cm_idlest_offs))
+		return -EINVAL;
+
+	offs = idlest_reg - cm_base;
+	offs &= 0xff00;
+	*prcm_inst = offs;
+
+	return 0;
+}
+
+/* Clockdomain low-level operations */
+
+static int omap3xxx_clkdm_add_sleepdep(struct clockdomain *clkdm1,
+				       struct clockdomain *clkdm2)
+{
+	omap2_cm_set_mod_reg_bits((1 << clkdm2->dep_bit),
+				  clkdm1->pwrdm.ptr->prcm_offs,
+				  OMAP3430_CM_SLEEPDEP);
+	return 0;
+}
+
+static int omap3xxx_clkdm_del_sleepdep(struct clockdomain *clkdm1,
+				       struct clockdomain *clkdm2)
+{
+	omap2_cm_clear_mod_reg_bits((1 << clkdm2->dep_bit),
+				    clkdm1->pwrdm.ptr->prcm_offs,
+				    OMAP3430_CM_SLEEPDEP);
+	return 0;
+}
+
+static int omap3xxx_clkdm_read_sleepdep(struct clockdomain *clkdm1,
+					struct clockdomain *clkdm2)
+{
+	return omap2_cm_read_mod_bits_shift(clkdm1->pwrdm.ptr->prcm_offs,
+					    OMAP3430_CM_SLEEPDEP,
+					    (1 << clkdm2->dep_bit));
+}
+
+static int omap3xxx_clkdm_clear_all_sleepdeps(struct clockdomain *clkdm)
+{
+	struct clkdm_dep *cd;
+	u32 mask = 0;
+
+	for (cd = clkdm->sleepdep_srcs; cd && cd->clkdm_name; cd++) {
+		if (!cd->clkdm)
+			continue; /* only happens if data is erroneous */
+
+		mask |= 1 << cd->clkdm->dep_bit;
+		atomic_set(&cd->sleepdep_usecount, 0);
+	}
+	omap2_cm_clear_mod_reg_bits(mask, clkdm->pwrdm.ptr->prcm_offs,
+				    OMAP3430_CM_SLEEPDEP);
+	return 0;
+}
+
+static int omap3xxx_clkdm_sleep(struct clockdomain *clkdm)
+{
+	omap3xxx_cm_clkdm_force_sleep(clkdm->pwrdm.ptr->prcm_offs,
+				      clkdm->clktrctrl_mask);
+	return 0;
+}
+
+static int omap3xxx_clkdm_wakeup(struct clockdomain *clkdm)
+{
+	omap3xxx_cm_clkdm_force_wakeup(clkdm->pwrdm.ptr->prcm_offs,
+				       clkdm->clktrctrl_mask);
+	return 0;
+}
+
+static void omap3xxx_clkdm_allow_idle(struct clockdomain *clkdm)
+{
+	if (atomic_read(&clkdm->usecount) > 0)
+		_clkdm_add_autodeps(clkdm);
+
+	omap3xxx_cm_clkdm_enable_hwsup(clkdm->pwrdm.ptr->prcm_offs,
+				       clkdm->clktrctrl_mask);
+}
+
+static void omap3xxx_clkdm_deny_idle(struct clockdomain *clkdm)
+{
+	omap3xxx_cm_clkdm_disable_hwsup(clkdm->pwrdm.ptr->prcm_offs,
+					clkdm->clktrctrl_mask);
+
+	if (atomic_read(&clkdm->usecount) > 0)
+		_clkdm_del_autodeps(clkdm);
+}
+
+static int omap3xxx_clkdm_clk_enable(struct clockdomain *clkdm)
+{
+	bool hwsup = false;
+
+	if (!clkdm->clktrctrl_mask)
+		return 0;
+
+	/*
+	 * The CLKDM_MISSING_IDLE_REPORTING flag documentation has
+	 * more details on the unpleasant problem this is working
+	 * around
+	 */
+	if ((clkdm->flags & CLKDM_MISSING_IDLE_REPORTING) &&
+	    (clkdm->flags & CLKDM_CAN_FORCE_WAKEUP)) {
+		omap3xxx_clkdm_wakeup(clkdm);
+		return 0;
+	}
+
+	hwsup = omap3xxx_cm_is_clkdm_in_hwsup(clkdm->pwrdm.ptr->prcm_offs,
+					      clkdm->clktrctrl_mask);
+
+	if (hwsup) {
+		/* Disable HW transitions when we are changing deps */
+		omap3xxx_cm_clkdm_disable_hwsup(clkdm->pwrdm.ptr->prcm_offs,
+						clkdm->clktrctrl_mask);
+		_clkdm_add_autodeps(clkdm);
+		omap3xxx_cm_clkdm_enable_hwsup(clkdm->pwrdm.ptr->prcm_offs,
+					       clkdm->clktrctrl_mask);
+	} else {
+		if (clkdm->flags & CLKDM_CAN_FORCE_WAKEUP)
+			omap3xxx_clkdm_wakeup(clkdm);
+	}
+
+	return 0;
+}
+
+static int omap3xxx_clkdm_clk_disable(struct clockdomain *clkdm)
+{
+	bool hwsup = false;
+
+	if (!clkdm->clktrctrl_mask)
+		return 0;
+
+	/*
+	 * The CLKDM_MISSING_IDLE_REPORTING flag documentation has
+	 * more details on the unpleasant problem this is working
+	 * around
+	 */
+	if (clkdm->flags & CLKDM_MISSING_IDLE_REPORTING &&
+	    !(clkdm->flags & CLKDM_CAN_FORCE_SLEEP)) {
+		omap3xxx_cm_clkdm_enable_hwsup(clkdm->pwrdm.ptr->prcm_offs,
+					       clkdm->clktrctrl_mask);
+		return 0;
+	}
+
+	hwsup = omap3xxx_cm_is_clkdm_in_hwsup(clkdm->pwrdm.ptr->prcm_offs,
+					      clkdm->clktrctrl_mask);
+
+	if (hwsup) {
+		/* Disable HW transitions when we are changing deps */
+		omap3xxx_cm_clkdm_disable_hwsup(clkdm->pwrdm.ptr->prcm_offs,
+						clkdm->clktrctrl_mask);
+		_clkdm_del_autodeps(clkdm);
+		omap3xxx_cm_clkdm_enable_hwsup(clkdm->pwrdm.ptr->prcm_offs,
+					       clkdm->clktrctrl_mask);
+	} else {
+		if (clkdm->flags & CLKDM_CAN_FORCE_SLEEP)
+			omap3xxx_clkdm_sleep(clkdm);
+	}
+
+	return 0;
+}
+
+struct clkdm_ops omap3_clkdm_operations = {
+	.clkdm_add_wkdep	= omap2_clkdm_add_wkdep,
+	.clkdm_del_wkdep	= omap2_clkdm_del_wkdep,
+	.clkdm_read_wkdep	= omap2_clkdm_read_wkdep,
+	.clkdm_clear_all_wkdeps	= omap2_clkdm_clear_all_wkdeps,
+	.clkdm_add_sleepdep	= omap3xxx_clkdm_add_sleepdep,
+	.clkdm_del_sleepdep	= omap3xxx_clkdm_del_sleepdep,
+	.clkdm_read_sleepdep	= omap3xxx_clkdm_read_sleepdep,
+	.clkdm_clear_all_sleepdeps	= omap3xxx_clkdm_clear_all_sleepdeps,
+	.clkdm_sleep		= omap3xxx_clkdm_sleep,
+	.clkdm_wakeup		= omap3xxx_clkdm_wakeup,
+	.clkdm_allow_idle	= omap3xxx_clkdm_allow_idle,
+	.clkdm_deny_idle	= omap3xxx_clkdm_deny_idle,
+	.clkdm_clk_enable	= omap3xxx_clkdm_clk_enable,
+	.clkdm_clk_disable	= omap3xxx_clkdm_clk_disable,
+};
+
 /*
  * Context save/restore code - OMAP3 only
  */
-#ifdef CONFIG_ARCH_OMAP3
 struct omap3_cm_regs {
 	u32 iva2_cm_clksel1;
 	u32 iva2_cm_clksel2;
@@ -555,4 +635,31 @@ void omap3_cm_restore_context(void)
 	omap2_cm_write_mod_reg(cm_context.cm_clkout_ctrl, OMAP3430_CCR_MOD,
 			       OMAP3_CM_CLKOUT_CTRL_OFFSET);
 }
-#endif
+
+/*
+ *
+ */
+
+static struct cm_ll_data omap3xxx_cm_ll_data = {
+	.split_idlest_reg	= &omap3xxx_cm_split_idlest_reg,
+	.wait_module_ready	= &omap3xxx_cm_wait_module_ready,
+};
+
+int __init omap3xxx_cm_init(void)
+{
+	if (!cpu_is_omap34xx())
+		return 0;
+
+	return cm_register(&omap3xxx_cm_ll_data);
+}
+
+static void __exit omap3xxx_cm_exit(void)
+{
+	if (!cpu_is_omap34xx())
+		return;
+
+	/* Should never happen */
+	WARN(cm_unregister(&omap3xxx_cm_ll_data),
+	     "%s: cm_ll_data function pointer mismatch\n", __func__);
+}
+__exitcall(omap3xxx_cm_exit);

arch/arm/mach-omap2/cm3xxx.h

@@ -0,0 +1,91 @@
+/*
+ * OMAP2/3 Clock Management (CM) register definitions
+ *
+ * Copyright (C) 2007-2009 Texas Instruments, Inc.
+ * Copyright (C) 2007-2010 Nokia Corporation
+ * Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * The CM hardware modules on the OMAP2/3 are quite similar to each
+ * other.  The CM modules/instances on OMAP4 are quite different, so
+ * they are handled in a separate file.
+ */
+#ifndef __ARCH_ASM_MACH_OMAP2_CM3XXX_H
+#define __ARCH_ASM_MACH_OMAP2_CM3XXX_H
+
+#include "prcm-common.h"
+#include "cm2xxx_3xxx.h"
+
+#define OMAP34XX_CM_REGADDR(module, reg)				\
+			OMAP2_L4_IO_ADDRESS(OMAP3430_CM_BASE + (module) + (reg))
+
+
+/*
+ * OMAP3-specific global CM registers
+ * Use cm_{read,write}_reg() with these registers.
+ * These registers appear once per CM module.
+ */
+
+#define OMAP3430_CM_REVISION		OMAP34XX_CM_REGADDR(OCP_MOD, 0x0000)
+#define OMAP3430_CM_SYSCONFIG		OMAP34XX_CM_REGADDR(OCP_MOD, 0x0010)
+#define OMAP3430_CM_POLCTRL		OMAP34XX_CM_REGADDR(OCP_MOD, 0x009c)
+
+#define OMAP3_CM_CLKOUT_CTRL_OFFSET	0x0070
+#define OMAP3430_CM_CLKOUT_CTRL		OMAP_CM_REGADDR(OMAP3430_CCR_MOD, 0x0070)
+
+/*
+ * Module specific CM register offsets from CM_BASE + domain offset
+ * Use cm_{read,write}_mod_reg() with these registers.
+ * These register offsets generally appear in more than one PRCM submodule.
+ */
+
+/* OMAP3-specific register offsets */
+
+#define OMAP3430_CM_CLKEN_PLL				0x0004
+#define OMAP3430ES2_CM_CLKEN2				0x0004
+#define OMAP3430ES2_CM_FCLKEN3				0x0008
+#define OMAP3430_CM_IDLEST_PLL				CM_IDLEST2
+#define OMAP3430_CM_AUTOIDLE_PLL			CM_AUTOIDLE2
+#define OMAP3430ES2_CM_AUTOIDLE2_PLL			CM_AUTOIDLE2
+#define OMAP3430_CM_CLKSEL1				CM_CLKSEL
+#define OMAP3430_CM_CLKSEL1_PLL				CM_CLKSEL
+#define OMAP3430_CM_CLKSEL2_PLL				CM_CLKSEL2
+#define OMAP3430_CM_SLEEPDEP				CM_CLKSEL2
+#define OMAP3430_CM_CLKSEL3				OMAP2_CM_CLKSTCTRL
+#define OMAP3430_CM_CLKSTST				0x004c
+#define OMAP3430ES2_CM_CLKSEL4				0x004c
+#define OMAP3430ES2_CM_CLKSEL5				0x0050
+#define OMAP3430_CM_CLKSEL2_EMU				0x0050
+#define OMAP3430_CM_CLKSEL3_EMU				0x0054
+
+
+/* CM_IDLEST bit field values to indicate deasserted IdleReq */
+
+#define OMAP34XX_CM_IDLEST_VAL				1
+
+
+#ifndef __ASSEMBLER__
+
+extern void omap3xxx_cm_clkdm_enable_hwsup(s16 module, u32 mask);
+extern void omap3xxx_cm_clkdm_disable_hwsup(s16 module, u32 mask);
+extern void omap3xxx_cm_clkdm_force_sleep(s16 module, u32 mask);
+extern void omap3xxx_cm_clkdm_force_wakeup(s16 module, u32 mask);
+
+extern bool omap3xxx_cm_is_clkdm_in_hwsup(s16 module, u32 mask);
+extern int omap3xxx_cm_wait_module_ready(s16 prcm_mod, u8 idlest_id,
+					 u8 idlest_shift);
+
+extern int omap3xxx_cm_split_idlest_reg(void __iomem *idlest_reg,
+					s16 *prcm_inst, u8 *idlest_reg_id);
+
+extern void omap3_cm_save_context(void);
+extern void omap3_cm_restore_context(void);
+
+extern int __init omap3xxx_cm_init(void);
+
+#endif
+
+#endif

arch/arm/mach-omap2/cm_common.c

@@ -0,0 +1,140 @@
+/*
+ * OMAP2+ common Clock Management (CM) IP block functions
+ *
+ * Copyright (C) 2012 Texas Instruments, Inc.
+ * Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * XXX This code should eventually be moved to a CM driver.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+
+#include "cm2xxx.h"
+#include "cm3xxx.h"
+#include "cm44xx.h"
+#include "common.h"
+
+/*
+ * cm_ll_data: function pointers to SoC-specific implementations of
+ * common CM functions
+ */
+static struct cm_ll_data null_cm_ll_data;
+static struct cm_ll_data *cm_ll_data = &null_cm_ll_data;
+
+/* cm_base: base virtual address of the CM IP block */
+void __iomem *cm_base;
+
+/* cm2_base: base virtual address of the CM2 IP block (OMAP44xx only) */
+void __iomem *cm2_base;
+
+/**
+ * omap2_set_globals_cm - set the CM/CM2 base addresses (for early use)
+ * @cm: CM base virtual address
+ * @cm2: CM2 base virtual address (if present on the booted SoC)
+ *
+ * XXX Will be replaced when the PRM/CM drivers are completed.
+ */
+void __init omap2_set_globals_cm(void __iomem *cm, void __iomem *cm2)
+{
+	cm_base = cm;
+	cm2_base = cm2;
+}
+
+/**
+ * cm_split_idlest_reg - split CM_IDLEST reg addr into its components
+ * @idlest_reg: CM_IDLEST* virtual address
+ * @prcm_inst: pointer to an s16 to return the PRCM instance offset
+ * @idlest_reg_id: pointer to a u8 to return the CM_IDLESTx register ID
+ *
+ * Given an absolute CM_IDLEST register address @idlest_reg, passes
+ * the PRCM instance offset and IDLEST register ID back to the caller
+ * via the @prcm_inst and @idlest_reg_id.  Returns -EINVAL upon error,
+ * or 0 upon success.  XXX This function is only needed until absolute
+ * register addresses are removed from the OMAP struct clk records.
+ */
+int cm_split_idlest_reg(void __iomem *idlest_reg, s16 *prcm_inst,
+			u8 *idlest_reg_id)
+{
+	if (!cm_ll_data->split_idlest_reg) {
+		WARN_ONCE(1, "cm: %s: no low-level function defined\n",
+			  __func__);
+		return -EINVAL;
+	}
+
+	return cm_ll_data->split_idlest_reg(idlest_reg, prcm_inst,
+					   idlest_reg_id);
+}
+
+/**
+ * cm_wait_module_ready - wait for a module to leave idle or standby
+ * @prcm_mod: PRCM module offset
+ * @idlest_id: CM_IDLESTx register ID (i.e., x = 1, 2, 3)
+ * @idlest_shift: shift of the bit in the CM_IDLEST* register to check
+ *
+ * Wait for the PRCM to indicate that the module identified by
+ * (@prcm_mod, @idlest_id, @idlest_shift) is clocked.  Return 0 upon
+ * success, -EBUSY if the module doesn't enable in time, or -EINVAL if
+ * no per-SoC wait_module_ready() function pointer has been registered
+ * or if the idlest register is unknown on the SoC.
+ */
+int cm_wait_module_ready(s16 prcm_mod, u8 idlest_id, u8 idlest_shift)
+{
+	if (!cm_ll_data->wait_module_ready) {
+		WARN_ONCE(1, "cm: %s: no low-level function defined\n",
+			  __func__);
+		return -EINVAL;
+	}
+
+	return cm_ll_data->wait_module_ready(prcm_mod, idlest_id, idlest_shift);
+}
+
+/**
+ * cm_register - register per-SoC low-level data with the CM
+ * @cld: low-level per-SoC OMAP CM data & function pointers to register
+ *
+ * Register per-SoC low-level OMAP CM data and function pointers with
+ * the OMAP CM common interface.  The caller must keep the data
+ * pointed to by @cld valid until it calls cm_unregister() and
+ * it returns successfully.  Returns 0 upon success, -EINVAL if @cld
+ * is NULL, or -EEXIST if cm_register() has already been called
+ * without an intervening cm_unregister().
+ */
+int cm_register(struct cm_ll_data *cld)
+{
+	if (!cld)
+		return -EINVAL;
+
+	if (cm_ll_data != &null_cm_ll_data)
+		return -EEXIST;
+
+	cm_ll_data = cld;
+
+	return 0;
+}
+
+/**
+ * cm_unregister - unregister per-SoC low-level data & function pointers
+ * @cld: low-level per-SoC OMAP CM data & function pointers to unregister
+ *
+ * Unregister per-SoC low-level OMAP CM data and function pointers
+ * that were previously registered with cm_register().  The
+ * caller may not destroy any of the data pointed to by @cld until
+ * this function returns successfully.  Returns 0 upon success, or
+ * -EINVAL if @cld is NULL or if @cld does not match the struct
+ * cm_ll_data * previously registered by cm_register().
+ */
+int cm_unregister(struct cm_ll_data *cld)
+{
+	if (!cld || cm_ll_data != cld)
+		return -EINVAL;
+
+	cm_ll_data = &null_cm_ll_data;
+
+	return 0;
+}

arch/arm/mach-omap2/cminst44xx.c

@@ -2,8 +2,9 @@
  * OMAP4 CM instance functions
  *
  * Copyright (C) 2009 Nokia Corporation
- * Copyright (C) 2011 Texas Instruments, Inc.
+ * Copyright (C) 2008-2011 Texas Instruments, Inc.
  * Paul Walmsley
+ * Rajendra Nayak <rnayak@ti.com>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -22,6 +23,7 @@
 
 #include "iomap.h"
 #include "common.h"
+#include "clockdomain.h"
 #include "cm.h"
 #include "cm1_44xx.h"
 #include "cm2_44xx.h"
@@ -343,3 +345,141 @@ void omap4_cminst_module_disable(u8 part, u16 inst, s16 cdoffs,
 	v &= ~OMAP4430_MODULEMODE_MASK;
 	omap4_cminst_write_inst_reg(v, part, inst, clkctrl_offs);
 }
+
+/*
+ * Clockdomain low-level functions
+ */
+
+static int omap4_clkdm_add_wkup_sleep_dep(struct clockdomain *clkdm1,
+					struct clockdomain *clkdm2)
+{
+	omap4_cminst_set_inst_reg_bits((1 << clkdm2->dep_bit),
+				       clkdm1->prcm_partition,
+				       clkdm1->cm_inst, clkdm1->clkdm_offs +
+				       OMAP4_CM_STATICDEP);
+	return 0;
+}
+
+static int omap4_clkdm_del_wkup_sleep_dep(struct clockdomain *clkdm1,
+					struct clockdomain *clkdm2)
+{
+	omap4_cminst_clear_inst_reg_bits((1 << clkdm2->dep_bit),
+					 clkdm1->prcm_partition,
+					 clkdm1->cm_inst, clkdm1->clkdm_offs +
+					 OMAP4_CM_STATICDEP);
+	return 0;
+}
+
+static int omap4_clkdm_read_wkup_sleep_dep(struct clockdomain *clkdm1,
+					struct clockdomain *clkdm2)
+{
+	return omap4_cminst_read_inst_reg_bits(clkdm1->prcm_partition,
+					       clkdm1->cm_inst,
+					       clkdm1->clkdm_offs +
+					       OMAP4_CM_STATICDEP,
+					       (1 << clkdm2->dep_bit));
+}
+
+static int omap4_clkdm_clear_all_wkup_sleep_deps(struct clockdomain *clkdm)
+{
+	struct clkdm_dep *cd;
+	u32 mask = 0;
+
+	if (!clkdm->prcm_partition)
+		return 0;
+
+	for (cd = clkdm->wkdep_srcs; cd && cd->clkdm_name; cd++) {
+		if (!cd->clkdm)
+			continue; /* only happens if data is erroneous */
+
+		mask |= 1 << cd->clkdm->dep_bit;
+		atomic_set(&cd->wkdep_usecount, 0);
+	}
+
+	omap4_cminst_clear_inst_reg_bits(mask, clkdm->prcm_partition,
+					 clkdm->cm_inst, clkdm->clkdm_offs +
+					 OMAP4_CM_STATICDEP);
+	return 0;
+}
+
+static int omap4_clkdm_sleep(struct clockdomain *clkdm)
+{
+	omap4_cminst_clkdm_enable_hwsup(clkdm->prcm_partition,
+					clkdm->cm_inst, clkdm->clkdm_offs);
+	return 0;
+}
+
+static int omap4_clkdm_wakeup(struct clockdomain *clkdm)
+{
+	omap4_cminst_clkdm_force_wakeup(clkdm->prcm_partition,
+					clkdm->cm_inst, clkdm->clkdm_offs);
+	return 0;
+}
+
+static void omap4_clkdm_allow_idle(struct clockdomain *clkdm)
+{
+	omap4_cminst_clkdm_enable_hwsup(clkdm->prcm_partition,
+					clkdm->cm_inst, clkdm->clkdm_offs);
+}
+
+static void omap4_clkdm_deny_idle(struct clockdomain *clkdm)
+{
+	if (clkdm->flags & CLKDM_CAN_FORCE_WAKEUP)
+		omap4_clkdm_wakeup(clkdm);
+	else
+		omap4_cminst_clkdm_disable_hwsup(clkdm->prcm_partition,
+						 clkdm->cm_inst,
+						 clkdm->clkdm_offs);
+}
+
+static int omap4_clkdm_clk_enable(struct clockdomain *clkdm)
+{
+	if (clkdm->flags & CLKDM_CAN_FORCE_WAKEUP)
+		return omap4_clkdm_wakeup(clkdm);
+
+	return 0;
+}
+
+static int omap4_clkdm_clk_disable(struct clockdomain *clkdm)
+{
+	bool hwsup = false;
+
+	if (!clkdm->prcm_partition)
+		return 0;
+
+	/*
+	 * The CLKDM_MISSING_IDLE_REPORTING flag documentation has
+	 * more details on the unpleasant problem this is working
+	 * around
+	 */
+	if (clkdm->flags & CLKDM_MISSING_IDLE_REPORTING &&
+	    !(clkdm->flags & CLKDM_CAN_FORCE_SLEEP)) {
+		omap4_clkdm_allow_idle(clkdm);
+		return 0;
+	}
+
+	hwsup = omap4_cminst_is_clkdm_in_hwsup(clkdm->prcm_partition,
+					clkdm->cm_inst, clkdm->clkdm_offs);
+
+	if (!hwsup && (clkdm->flags & CLKDM_CAN_FORCE_SLEEP))
+		omap4_clkdm_sleep(clkdm);
+
+	return 0;
+}
+
+struct clkdm_ops omap4_clkdm_operations = {
+	.clkdm_add_wkdep	= omap4_clkdm_add_wkup_sleep_dep,
+	.clkdm_del_wkdep	= omap4_clkdm_del_wkup_sleep_dep,
+	.clkdm_read_wkdep	= omap4_clkdm_read_wkup_sleep_dep,
+	.clkdm_clear_all_wkdeps	= omap4_clkdm_clear_all_wkup_sleep_deps,
+	.clkdm_add_sleepdep	= omap4_clkdm_add_wkup_sleep_dep,
+	.clkdm_del_sleepdep	= omap4_clkdm_del_wkup_sleep_dep,
+	.clkdm_read_sleepdep	= omap4_clkdm_read_wkup_sleep_dep,
+	.clkdm_clear_all_sleepdeps	= omap4_clkdm_clear_all_wkup_sleep_deps,
+	.clkdm_sleep		= omap4_clkdm_sleep,
+	.clkdm_wakeup		= omap4_clkdm_wakeup,
+	.clkdm_allow_idle	= omap4_clkdm_allow_idle,
+	.clkdm_deny_idle	= omap4_clkdm_deny_idle,
+	.clkdm_clk_enable	= omap4_clkdm_clk_enable,
+	.clkdm_clk_disable	= omap4_clkdm_clk_disable,
+};

arch/arm/mach-omap2/cminst44xx.h

@@ -38,4 +38,6 @@ extern u32 omap4_cminst_clear_inst_reg_bits(u32 bits, u8 part, s16 inst,
 extern u32 omap4_cminst_read_inst_reg_bits(u8 part, u16 inst, s16 idx,
 					   u32 mask);
 
+extern void omap_cm_base_init(void);
+
 #endif

arch/arm/mach-omap2/common.c

@@ -14,196 +14,13 @@
  */
 #include <linux/kernel.h>
 #include <linux/init.h>
-#include <linux/clk.h>
-#include <linux/io.h>
 #include <linux/platform_data/dsp-omap.h>
 
 #include <plat/vram.h>
 
-#include "soc.h"
-#include "iomap.h"
 #include "common.h"
-#include "clock.h"
-#include "sdrc.h"
-#include "control.h"
 #include "omap-secure.h"
 
-/* Global address base setup code */
-
-static void __init __omap2_set_globals(struct omap_globals *omap2_globals)
-{
-	omap2_set_globals_tap(omap2_globals);
-	omap2_set_globals_sdrc(omap2_globals);
-	omap2_set_globals_control(omap2_globals);
-	omap2_set_globals_prcm(omap2_globals);
-}
-
-#if defined(CONFIG_SOC_OMAP2420)
-
-static struct omap_globals omap242x_globals = {
-	.class	= OMAP242X_CLASS,
-	.tap	= OMAP2_L4_IO_ADDRESS(0x48014000),
-	.sdrc	= OMAP2_L3_IO_ADDRESS(OMAP2420_SDRC_BASE),
-	.sms	= OMAP2_L3_IO_ADDRESS(OMAP2420_SMS_BASE),
-	.ctrl	= OMAP2_L4_IO_ADDRESS(OMAP242X_CTRL_BASE),
-	.prm	= OMAP2_L4_IO_ADDRESS(OMAP2420_PRM_BASE),
-	.cm	= OMAP2_L4_IO_ADDRESS(OMAP2420_CM_BASE),
-};
-
-void __init omap2_set_globals_242x(void)
-{
-	__omap2_set_globals(&omap242x_globals);
-}
-
-void __init omap242x_map_io(void)
-{
-	omap242x_map_common_io();
-}
-#endif
-
-#if defined(CONFIG_SOC_OMAP2430)
-
-static struct omap_globals omap243x_globals = {
-	.class	= OMAP243X_CLASS,
-	.tap	= OMAP2_L4_IO_ADDRESS(0x4900a000),
-	.sdrc	= OMAP2_L3_IO_ADDRESS(OMAP243X_SDRC_BASE),
-	.sms	= OMAP2_L3_IO_ADDRESS(OMAP243X_SMS_BASE),
-	.ctrl	= OMAP2_L4_IO_ADDRESS(OMAP243X_CTRL_BASE),
-	.prm	= OMAP2_L4_IO_ADDRESS(OMAP2430_PRM_BASE),
-	.cm	= OMAP2_L4_IO_ADDRESS(OMAP2430_CM_BASE),
-};
-
-void __init omap2_set_globals_243x(void)
-{
-	__omap2_set_globals(&omap243x_globals);
-}
-
-void __init omap243x_map_io(void)
-{
-	omap243x_map_common_io();
-}
-#endif
-
-#if defined(CONFIG_ARCH_OMAP3)
-
-static struct omap_globals omap3_globals = {
-	.class	= OMAP343X_CLASS,
-	.tap	= OMAP2_L4_IO_ADDRESS(0x4830A000),
-	.sdrc	= OMAP2_L3_IO_ADDRESS(OMAP343X_SDRC_BASE),
-	.sms	= OMAP2_L3_IO_ADDRESS(OMAP343X_SMS_BASE),
-	.ctrl	= OMAP2_L4_IO_ADDRESS(OMAP343X_CTRL_BASE),
-	.prm	= OMAP2_L4_IO_ADDRESS(OMAP3430_PRM_BASE),
-	.cm	= OMAP2_L4_IO_ADDRESS(OMAP3430_CM_BASE),
-};
-
-void __init omap2_set_globals_3xxx(void)
-{
-	__omap2_set_globals(&omap3_globals);
-}
-
-void __init omap3_map_io(void)
-{
-	omap34xx_map_common_io();
-}
-
-/*
- * Adjust TAP register base such that omap3_check_revision accesses the correct
- * TI81XX register for checking device ID (it adds 0x204 to tap base while
- * TI81XX DEVICE ID register is at offset 0x600 from control base).
- */
-#define TI81XX_TAP_BASE		(TI81XX_CTRL_BASE + \
-				TI81XX_CONTROL_DEVICE_ID - 0x204)
-
-static struct omap_globals ti81xx_globals = {
-	.class  = OMAP343X_CLASS,
-	.tap    = OMAP2_L4_IO_ADDRESS(TI81XX_TAP_BASE),
-	.ctrl   = OMAP2_L4_IO_ADDRESS(TI81XX_CTRL_BASE),
-	.prm    = OMAP2_L4_IO_ADDRESS(TI81XX_PRCM_BASE),
-	.cm     = OMAP2_L4_IO_ADDRESS(TI81XX_PRCM_BASE),
-};
-
-void __init omap2_set_globals_ti81xx(void)
-{
-	__omap2_set_globals(&ti81xx_globals);
-}
-
-void __init ti81xx_map_io(void)
-{
-	omapti81xx_map_common_io();
-}
-#endif
-
-#if defined(CONFIG_SOC_AM33XX)
-#define AM33XX_TAP_BASE		(AM33XX_CTRL_BASE + \
-				TI81XX_CONTROL_DEVICE_ID - 0x204)
-
-static struct omap_globals am33xx_globals = {
-	.class  = AM335X_CLASS,
-	.tap    = AM33XX_L4_WK_IO_ADDRESS(AM33XX_TAP_BASE),
-	.ctrl   = AM33XX_L4_WK_IO_ADDRESS(AM33XX_CTRL_BASE),
-	.prm    = AM33XX_L4_WK_IO_ADDRESS(AM33XX_PRCM_BASE),
-	.cm     = AM33XX_L4_WK_IO_ADDRESS(AM33XX_PRCM_BASE),
-};
-
-void __init omap2_set_globals_am33xx(void)
-{
-	__omap2_set_globals(&am33xx_globals);
-}
-
-void __init am33xx_map_io(void)
-{
-	omapam33xx_map_common_io();
-}
-#endif
-
-#if defined(CONFIG_ARCH_OMAP4)
-static struct omap_globals omap4_globals = {
-	.class	= OMAP443X_CLASS,
-	.tap	= OMAP2_L4_IO_ADDRESS(OMAP443X_SCM_BASE),
-	.ctrl	= OMAP2_L4_IO_ADDRESS(OMAP443X_SCM_BASE),
-	.ctrl_pad	= OMAP2_L4_IO_ADDRESS(OMAP443X_CTRL_BASE),
-	.prm	= OMAP2_L4_IO_ADDRESS(OMAP4430_PRM_BASE),
-	.cm	= OMAP2_L4_IO_ADDRESS(OMAP4430_CM_BASE),
-	.cm2	= OMAP2_L4_IO_ADDRESS(OMAP4430_CM2_BASE),
-	.prcm_mpu	= OMAP2_L4_IO_ADDRESS(OMAP4430_PRCM_MPU_BASE),
-};
-
-void __init omap2_set_globals_443x(void)
-{
-	__omap2_set_globals(&omap4_globals);
-}
-
-void __init omap4_map_io(void)
-{
-	omap44xx_map_common_io();
-}
-#endif
-
-#if defined(CONFIG_SOC_OMAP5)
-static struct omap_globals omap5_globals = {
-	.class	= OMAP54XX_CLASS,
-	.tap	= OMAP2_L4_IO_ADDRESS(OMAP54XX_SCM_BASE),
-	.ctrl	= OMAP2_L4_IO_ADDRESS(OMAP54XX_SCM_BASE),
-	.ctrl_pad	= OMAP2_L4_IO_ADDRESS(OMAP54XX_CTRL_BASE),
-	.prm	= OMAP2_L4_IO_ADDRESS(OMAP54XX_PRM_BASE),
-	.cm	= OMAP2_L4_IO_ADDRESS(OMAP54XX_CM_CORE_AON_BASE),
-	.cm2	= OMAP2_L4_IO_ADDRESS(OMAP54XX_CM_CORE_BASE),
-	.prcm_mpu = OMAP2_L4_IO_ADDRESS(OMAP54XX_PRCM_MPU_BASE),
-};
-
-void __init omap2_set_globals_5xxx(void)
-{
-	omap2_set_globals_tap(&omap5_globals);
-	omap2_set_globals_control(&omap5_globals);
-	omap2_set_globals_prcm(&omap5_globals);
-}
-
-void __init omap5_map_io(void)
-{
-	omap5_map_common_io();
-}
-#endif
-
 /*
  * Stub function for OMAP2 so that common files
  * continue to build when custom builds are used

arch/arm/mach-omap2/common.h

@@ -41,54 +41,6 @@
 
 #define OMAP_INTC_START		NR_IRQS
 
-#ifdef CONFIG_SOC_OMAP2420
-extern void omap242x_map_common_io(void);
-#else
-static inline void omap242x_map_common_io(void)
-{
-}
-#endif
-
-#ifdef CONFIG_SOC_OMAP2430
-extern void omap243x_map_common_io(void);
-#else
-static inline void omap243x_map_common_io(void)
-{
-}
-#endif
-
-#ifdef CONFIG_ARCH_OMAP3
-extern void omap34xx_map_common_io(void);
-#else
-static inline void omap34xx_map_common_io(void)
-{
-}
-#endif
-
-#ifdef CONFIG_SOC_TI81XX
-extern void omapti81xx_map_common_io(void);
-#else
-static inline void omapti81xx_map_common_io(void)
-{
-}
-#endif
-
-#ifdef CONFIG_SOC_AM33XX
-extern void omapam33xx_map_common_io(void);
-#else
-static inline void omapam33xx_map_common_io(void)
-{
-}
-#endif
-
-#ifdef CONFIG_ARCH_OMAP4
-extern void omap44xx_map_common_io(void);
-#else
-static inline void omap44xx_map_common_io(void)
-{
-}
-#endif
-
 #if defined(CONFIG_PM) && defined(CONFIG_ARCH_OMAP2)
 int omap2_pm_init(void);
 #else
@@ -125,14 +77,6 @@ static inline int omap_mux_late_init(void)
 }
 #endif
 
-#ifdef CONFIG_SOC_OMAP5
-extern void omap5_map_common_io(void);
-#else
-static inline void omap5_map_common_io(void)
-{
-}
-#endif
-
 extern void omap2_init_common_infrastructure(void);
 
 extern struct sys_timer omap2_timer;
@@ -165,52 +109,43 @@ void am35xx_init_late(void);
 void ti81xx_init_late(void);
 void omap4430_init_late(void);
 int omap2_common_pm_late_init(void);
-void omap_prcm_restart(char, const char *);
 
-/*
- * IO bases for various OMAP processors
- * Except the tap base, rest all the io bases
- * listed are physical addresses.
- */
-struct omap_globals {
-	u32		class;		/* OMAP class to detect */
-	void __iomem	*tap;		/* Control module ID code */
-	void __iomem	*sdrc;           /* SDRAM Controller */
-	void __iomem	*sms;            /* SDRAM Memory Scheduler */
-	void __iomem	*ctrl;           /* System Control Module */
-	void __iomem	*ctrl_pad;	/* PAD Control Module */
-	void __iomem	*prm;            /* Power and Reset Management */
-	void __iomem	*cm;             /* Clock Management */
-	void __iomem	*cm2;
-	void __iomem	*prcm_mpu;
-};
-
-void omap2_set_globals_242x(void);
-void omap2_set_globals_243x(void);
-void omap2_set_globals_3xxx(void);
-void omap2_set_globals_443x(void);
-void omap2_set_globals_5xxx(void);
-void omap2_set_globals_ti81xx(void);
-void omap2_set_globals_am33xx(void);
-
-/* These get called from omap2_set_globals_xxxx(), do not call these */
-void omap2_set_globals_tap(struct omap_globals *);
-#if defined(CONFIG_SOC_HAS_OMAP2_SDRC)
-void omap2_set_globals_sdrc(struct omap_globals *);
+#if defined(CONFIG_SOC_OMAP2420) || defined(CONFIG_SOC_OMAP2430)
+void omap2xxx_restart(char mode, const char *cmd);
 #else
-static inline void omap2_set_globals_sdrc(struct omap_globals *omap2_globals)
-{ }
+static inline void omap2xxx_restart(char mode, const char *cmd)
+{
+}
 #endif
-void omap2_set_globals_control(struct omap_globals *);
-void omap2_set_globals_prcm(struct omap_globals *);
 
-void omap242x_map_io(void);
-void omap243x_map_io(void);
-void omap3_map_io(void);
-void am33xx_map_io(void);
-void omap4_map_io(void);
-void omap5_map_io(void);
-void ti81xx_map_io(void);
+#ifdef CONFIG_ARCH_OMAP3
+void omap3xxx_restart(char mode, const char *cmd);
+#else
+static inline void omap3xxx_restart(char mode, const char *cmd)
+{
+}
+#endif
+
+#if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5)
+void omap44xx_restart(char mode, const char *cmd);
+#else
+static inline void omap44xx_restart(char mode, const char *cmd)
+{
+}
+#endif
+
+/* This gets called from mach-omap2/io.c, do not call this */
+void __init omap2_set_globals_tap(u32 class, void __iomem *tap);
+
+void __init omap242x_map_io(void);
+void __init omap243x_map_io(void);
+void __init omap3_map_io(void);
+void __init am33xx_map_io(void);
+void __init omap4_map_io(void);
+void __init omap5_map_io(void);
+void __init ti81xx_map_io(void);
+
+/* omap_barriers_init() is OMAP4 only */
 void omap_barriers_init(void);
 
 /**

arch/arm/mach-omap2/control.c

@@ -20,8 +20,8 @@
 #include "common.h"
 #include "cm-regbits-34xx.h"
 #include "prm-regbits-34xx.h"
-#include "prm2xxx_3xxx.h"
-#include "cm2xxx_3xxx.h"
+#include "prm3xxx.h"
+#include "cm3xxx.h"
 #include "sdrc.h"
 #include "pm.h"
 #include "control.h"
@@ -147,13 +147,11 @@ static struct omap3_control_regs control_context;
 #define OMAP_CTRL_REGADDR(reg)		(omap2_ctrl_base + (reg))
 #define OMAP4_CTRL_PAD_REGADDR(reg)	(omap4_ctrl_pad_base + (reg))
 
-void __init omap2_set_globals_control(struct omap_globals *omap2_globals)
+void __init omap2_set_globals_control(void __iomem *ctrl,
+				      void __iomem *ctrl_pad)
 {
-	if (omap2_globals->ctrl)
-		omap2_ctrl_base = omap2_globals->ctrl;
-
-	if (omap2_globals->ctrl_pad)
-		omap4_ctrl_pad_base = omap2_globals->ctrl_pad;
+	omap2_ctrl_base = ctrl;
+	omap4_ctrl_pad_base = ctrl_pad;
 }
 
 void __iomem *omap_ctrl_base_get(void)

arch/arm/mach-omap2/control.h

@@ -414,6 +414,8 @@ extern void omap_ctrl_write_dsp_boot_addr(u32 bootaddr);
 extern void omap_ctrl_write_dsp_boot_mode(u8 bootmode);
 extern void omap3630_ctrl_disable_rta(void);
 extern int omap3_ctrl_save_padconf(void);
+extern void omap2_set_globals_control(void __iomem *ctrl,
+				      void __iomem *ctrl_pad);
 #else
 #define omap_ctrl_base_get()		0
 #define omap_ctrl_readb(x)		0

arch/arm/mach-omap2/cpuidle34xx.c

@@ -27,7 +27,6 @@
 #include <linux/export.h>
 #include <linux/cpu_pm.h>
 
-#include <plat/prcm.h>
 #include "powerdomain.h"
 #include "clockdomain.h"
 

arch/arm/mach-omap2/devices.c

@@ -646,29 +646,3 @@ static int __init omap2_init_devices(void)
 	return 0;
 }
 arch_initcall(omap2_init_devices);
-
-#if defined(CONFIG_OMAP_WATCHDOG) || defined(CONFIG_OMAP_WATCHDOG_MODULE)
-static int __init omap_init_wdt(void)
-{
-	int id = -1;
-	struct platform_device *pdev;
-	struct omap_hwmod *oh;
-	char *oh_name = "wd_timer2";
-	char *dev_name = "omap_wdt";
-
-	if (!cpu_class_is_omap2() || of_have_populated_dt())
-		return 0;
-
-	oh = omap_hwmod_lookup(oh_name);
-	if (!oh) {
-		pr_err("Could not look up wd_timer%d hwmod\n", id);
-		return -EINVAL;
-	}
-
-	pdev = omap_device_build(dev_name, id, oh, NULL, 0, NULL, 0, 0);
-	WARN(IS_ERR(pdev), "Can't build omap_device for %s:%s.\n",
-				dev_name, oh->name);
-	return 0;
-}
-subsys_initcall(omap_init_wdt);
-#endif

arch/arm/mach-omap2/display.c

@@ -35,6 +35,7 @@
 #include "mux.h"
 #include "control.h"
 #include "display.h"
+#include "prm.h"
 
 #define DISPC_CONTROL		0x0040
 #define DISPC_CONTROL2		0x0238
@@ -512,7 +513,6 @@ static void dispc_disable_outputs(void)
 	}
 }
 
-#define MAX_MODULE_SOFTRESET_WAIT	10000
 int omap_dss_reset(struct omap_hwmod *oh)
 {
 	struct omap_hwmod_opt_clk *oc;

arch/arm/mach-omap2/hdq1w.c

@@ -31,11 +31,9 @@
 #include "omap_device.h"
 #include "hdq1w.h"
 
+#include "prm.h"
 #include "common.h"
 
-/* Maximum microseconds to wait for OMAP module to softreset */
-#define MAX_MODULE_SOFTRESET_WAIT	10000
-
 /**
  * omap_hdq1w_reset - reset the OMAP HDQ1W module
  * @oh: struct omap_hwmod *

arch/arm/mach-omap2/i2c.c

@@ -20,10 +20,11 @@
  */
 
 #include "soc.h"
-#include "common.h"
 #include "omap_hwmod.h"
 #include "omap_device.h"
 
+#include "prm.h"
+#include "common.h"
 #include "mux.h"
 #include "i2c.h"
 
@@ -32,9 +33,6 @@
 #define OMAP2_I2C_CON_OFFSET			0x24
 #define OMAP4_I2C_CON_OFFSET			0xA4
 
-/* Maximum microseconds to wait for OMAP module to softreset */
-#define MAX_MODULE_SOFTRESET_WAIT	10000
-
 #define MAX_OMAP_I2C_HWMOD_NAME_LEN	16
 
 static void __init omap2_i2c_mux_pins(int bus_id)

arch/arm/mach-omap2/id.c

@@ -559,11 +559,12 @@ void __init omap5xxx_check_revision(void)
  * detect the exact revision later on in omap2_detect_revision() once map_io
  * is done.
  */
-void __init omap2_set_globals_tap(struct omap_globals *omap2_globals)
+void __init omap2_set_globals_tap(u32 class, void __iomem *tap)
 {
-	omap_revision = omap2_globals->class;
-	tap_base = omap2_globals->tap;
+	omap_revision = class;
+	tap_base = tap;
 
+	/* XXX What is this intended to do? */
 	if (cpu_is_omap34xx())
 		tap_prod_id = 0x0210;
 	else

arch/arm/mach-omap2/io.c

@@ -40,8 +40,16 @@
 #include "clock44xx.h"
 #include "omap-pm.h"
 #include "sdrc.h"
+#include "control.h"
 #include "serial.h"
 #include "sram.h"
+#include "cm2xxx.h"
+#include "cm3xxx.h"
+#include "prm.h"
+#include "cm.h"
+#include "prcm_mpu44xx.h"
+#include "prminst44xx.h"
+#include "cminst44xx.h"
 
 /*
  * The machine specific code may provide the extra mapping besides the
@@ -264,7 +272,7 @@ static struct map_desc omap54xx_io_desc[] __initdata = {
 #endif
 
 #ifdef CONFIG_SOC_OMAP2420
-void __init omap242x_map_common_io(void)
+void __init omap242x_map_io(void)
 {
 	iotable_init(omap24xx_io_desc, ARRAY_SIZE(omap24xx_io_desc));
 	iotable_init(omap242x_io_desc, ARRAY_SIZE(omap242x_io_desc));
@@ -272,7 +280,7 @@ void __init omap242x_map_common_io(void)
 #endif
 
 #ifdef CONFIG_SOC_OMAP2430
-void __init omap243x_map_common_io(void)
+void __init omap243x_map_io(void)
 {
 	iotable_init(omap24xx_io_desc, ARRAY_SIZE(omap24xx_io_desc));
 	iotable_init(omap243x_io_desc, ARRAY_SIZE(omap243x_io_desc));
@@ -280,28 +288,28 @@ void __init omap243x_map_common_io(void)
 #endif
 
 #ifdef CONFIG_ARCH_OMAP3
-void __init omap34xx_map_common_io(void)
+void __init omap3_map_io(void)
 {
 	iotable_init(omap34xx_io_desc, ARRAY_SIZE(omap34xx_io_desc));
 }
 #endif
 
 #ifdef CONFIG_SOC_TI81XX
-void __init omapti81xx_map_common_io(void)
+void __init ti81xx_map_io(void)
 {
 	iotable_init(omapti81xx_io_desc, ARRAY_SIZE(omapti81xx_io_desc));
 }
 #endif
 
 #ifdef CONFIG_SOC_AM33XX
-void __init omapam33xx_map_common_io(void)
+void __init am33xx_map_io(void)
 {
 	iotable_init(omapam33xx_io_desc, ARRAY_SIZE(omapam33xx_io_desc));
 }
 #endif
 
 #ifdef CONFIG_ARCH_OMAP4
-void __init omap44xx_map_common_io(void)
+void __init omap4_map_io(void)
 {
 	iotable_init(omap44xx_io_desc, ARRAY_SIZE(omap44xx_io_desc));
 	omap_barriers_init();
@@ -309,7 +317,7 @@ void __init omap44xx_map_common_io(void)
 #endif
 
 #ifdef CONFIG_SOC_OMAP5
-void __init omap5_map_common_io(void)
+void __init omap5_map_io(void)
 {
 	iotable_init(omap54xx_io_desc, ARRAY_SIZE(omap54xx_io_desc));
 }
@@ -371,8 +379,15 @@ static void __init omap_hwmod_init_postsetup(void)
 #ifdef CONFIG_SOC_OMAP2420
 void __init omap2420_init_early(void)
 {
-	omap2_set_globals_242x();
+	omap2_set_globals_tap(OMAP242X_CLASS, OMAP2_L4_IO_ADDRESS(0x48014000));
+	omap2_set_globals_sdrc(OMAP2_L3_IO_ADDRESS(OMAP2420_SDRC_BASE),
+			       OMAP2_L3_IO_ADDRESS(OMAP2420_SMS_BASE));
+	omap2_set_globals_control(OMAP2_L4_IO_ADDRESS(OMAP242X_CTRL_BASE),
+				  NULL);
+	omap2_set_globals_prm(OMAP2_L4_IO_ADDRESS(OMAP2420_PRM_BASE));
+	omap2_set_globals_cm(OMAP2_L4_IO_ADDRESS(OMAP2420_CM_BASE), NULL);
 	omap2xxx_check_revision();
+	omap2xxx_cm_init();
 	omap2xxx_voltagedomains_init();
 	omap242x_powerdomains_init();
 	omap242x_clockdomains_init();
@@ -392,8 +407,15 @@ void __init omap2420_init_late(void)
 #ifdef CONFIG_SOC_OMAP2430
 void __init omap2430_init_early(void)
 {
-	omap2_set_globals_243x();
+	omap2_set_globals_tap(OMAP243X_CLASS, OMAP2_L4_IO_ADDRESS(0x4900a000));
+	omap2_set_globals_sdrc(OMAP2_L3_IO_ADDRESS(OMAP243X_SDRC_BASE),
+			       OMAP2_L3_IO_ADDRESS(OMAP243X_SMS_BASE));
+	omap2_set_globals_control(OMAP2_L4_IO_ADDRESS(OMAP243X_CTRL_BASE),
+				  NULL);
+	omap2_set_globals_prm(OMAP2_L4_IO_ADDRESS(OMAP2430_PRM_BASE));
+	omap2_set_globals_cm(OMAP2_L4_IO_ADDRESS(OMAP2430_CM_BASE), NULL);
 	omap2xxx_check_revision();
+	omap2xxx_cm_init();
 	omap2xxx_voltagedomains_init();
 	omap243x_powerdomains_init();
 	omap243x_clockdomains_init();
@@ -417,9 +439,16 @@ void __init omap2430_init_late(void)
 #ifdef CONFIG_ARCH_OMAP3
 void __init omap3_init_early(void)
 {
-	omap2_set_globals_3xxx();
+	omap2_set_globals_tap(OMAP343X_CLASS, OMAP2_L4_IO_ADDRESS(0x4830A000));
+	omap2_set_globals_sdrc(OMAP2_L3_IO_ADDRESS(OMAP343X_SDRC_BASE),
+			       OMAP2_L3_IO_ADDRESS(OMAP343X_SMS_BASE));
+	omap2_set_globals_control(OMAP2_L4_IO_ADDRESS(OMAP343X_CTRL_BASE),
+				  NULL);
+	omap2_set_globals_prm(OMAP2_L4_IO_ADDRESS(OMAP3430_PRM_BASE));
+	omap2_set_globals_cm(OMAP2_L4_IO_ADDRESS(OMAP3430_CM_BASE), NULL);
 	omap3xxx_check_revision();
 	omap3xxx_check_features();
+	omap3xxx_cm_init();
 	omap3xxx_voltagedomains_init();
 	omap3xxx_powerdomains_init();
 	omap3xxx_clockdomains_init();
@@ -450,7 +479,12 @@ void __init am35xx_init_early(void)
 
 void __init ti81xx_init_early(void)
 {
-	omap2_set_globals_ti81xx();
+	omap2_set_globals_tap(OMAP343X_CLASS,
+			      OMAP2_L4_IO_ADDRESS(TI81XX_TAP_BASE));
+	omap2_set_globals_control(OMAP2_L4_IO_ADDRESS(TI81XX_CTRL_BASE),
+				  NULL);
+	omap2_set_globals_prm(OMAP2_L4_IO_ADDRESS(TI81XX_PRCM_BASE));
+	omap2_set_globals_cm(OMAP2_L4_IO_ADDRESS(TI81XX_PRCM_BASE), NULL);
 	omap3xxx_check_revision();
 	ti81xx_check_features();
 	omap3xxx_voltagedomains_init();
@@ -507,7 +541,12 @@ void __init ti81xx_init_late(void)
 #ifdef CONFIG_SOC_AM33XX
 void __init am33xx_init_early(void)
 {
-	omap2_set_globals_am33xx();
+	omap2_set_globals_tap(AM335X_CLASS,
+			      AM33XX_L4_WK_IO_ADDRESS(AM33XX_TAP_BASE));
+	omap2_set_globals_control(AM33XX_L4_WK_IO_ADDRESS(AM33XX_CTRL_BASE),
+				  NULL);
+	omap2_set_globals_prm(AM33XX_L4_WK_IO_ADDRESS(AM33XX_PRCM_BASE));
+	omap2_set_globals_cm(AM33XX_L4_WK_IO_ADDRESS(AM33XX_PRCM_BASE), NULL);
 	omap3xxx_check_revision();
 	ti81xx_check_features();
 	am33xx_voltagedomains_init();
@@ -522,7 +561,16 @@ void __init am33xx_init_early(void)
 #ifdef CONFIG_ARCH_OMAP4
 void __init omap4430_init_early(void)
 {
-	omap2_set_globals_443x();
+	omap2_set_globals_tap(OMAP443X_CLASS,
+			      OMAP2_L4_IO_ADDRESS(OMAP443X_SCM_BASE));
+	omap2_set_globals_control(OMAP2_L4_IO_ADDRESS(OMAP443X_SCM_BASE),
+				  OMAP2_L4_IO_ADDRESS(OMAP443X_CTRL_BASE));
+	omap2_set_globals_prm(OMAP2_L4_IO_ADDRESS(OMAP4430_PRM_BASE));
+	omap2_set_globals_cm(OMAP2_L4_IO_ADDRESS(OMAP4430_CM_BASE),
+			     OMAP2_L4_IO_ADDRESS(OMAP4430_CM2_BASE));
+	omap2_set_globals_prcm_mpu(OMAP2_L4_IO_ADDRESS(OMAP4430_PRCM_MPU_BASE));
+	omap_prm_base_init();
+	omap_cm_base_init();
 	omap4xxx_check_revision();
 	omap4xxx_check_features();
 	omap44xx_voltagedomains_init();
@@ -544,7 +592,16 @@ void __init omap4430_init_late(void)
 #ifdef CONFIG_SOC_OMAP5
 void __init omap5_init_early(void)
 {
-	omap2_set_globals_5xxx();
+	omap2_set_globals_tap(OMAP54XX_CLASS,
+			      OMAP2_L4_IO_ADDRESS(OMAP54XX_SCM_BASE));
+	omap2_set_globals_control(OMAP2_L4_IO_ADDRESS(OMAP54XX_SCM_BASE),
+				  OMAP2_L4_IO_ADDRESS(OMAP54XX_CTRL_BASE));
+	omap2_set_globals_prm(OMAP2_L4_IO_ADDRESS(OMAP54XX_PRM_BASE));
+	omap2_set_globals_cm(OMAP2_L4_IO_ADDRESS(OMAP54XX_CM_CORE_AON_BASE),
+			     OMAP2_L4_IO_ADDRESS(OMAP54XX_CM_CORE_BASE));
+	omap2_set_globals_prcm_mpu(OMAP2_L4_IO_ADDRESS(OMAP54XX_PRCM_MPU_BASE));
+	omap_prm_base_init();
+	omap_cm_base_init();
 	omap5xxx_check_revision();
 }
 #endif

arch/arm/mach-omap2/mcbsp.c

@@ -29,7 +29,7 @@
  * FIXME: Find a mechanism to enable/disable runtime the McBSP ICLK autoidle.
  * Sidetone needs non-gated ICLK and sidetone autoidle is broken.
  */
-#include "cm2xxx_3xxx.h"
+#include "cm3xxx.h"
 #include "cm-regbits-34xx.h"
 
 static int omap3_enable_st_clock(unsigned int id, bool enable)

arch/arm/mach-omap2/msdi.c

@@ -25,6 +25,7 @@
 #include <linux/err.h>
 #include <linux/platform_data/gpio-omap.h>
 
+#include "prm.h"
 #include "common.h"
 #include "control.h"
 #include "omap_hwmod.h"
@@ -43,9 +44,6 @@
 #define MSDI_CON_CLKD_MASK			(0x3f << 0)
 #define MSDI_CON_CLKD_SHIFT			0
 
-/* Maximum microseconds to wait for OMAP module to softreset */
-#define MAX_MODULE_SOFTRESET_WAIT	10000
-
 /* MSDI_TARGET_RESET_CLKD: clock divisor to use throughout the reset */
 #define MSDI_TARGET_RESET_CLKD		0x3ff
 

arch/arm/mach-omap2/omap2-restart.c

@@ -0,0 +1,65 @@
+/*
+ * omap2-restart.c - code common to all OMAP2xxx machines.
+ *
+ * Copyright (C) 2012 Texas Instruments
+ * Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+
+#include "common.h"
+#include "prm2xxx.h"
+
+/*
+ * reset_virt_prcm_set_ck, reset_sys_ck: pointers to the virt_prcm_set
+ * clock and the sys_ck.  Used during the reset process
+ */
+static struct clk *reset_virt_prcm_set_ck, *reset_sys_ck;
+
+/* Reboot handling */
+
+/**
+ * omap2xxx_restart - Set DPLL to bypass mode for reboot to work
+ *
+ * Set the DPLL to bypass so that reboot completes successfully.  No
+ * return value.
+ */
+void omap2xxx_restart(char mode, const char *cmd)
+{
+	u32 rate;
+
+	rate = clk_get_rate(reset_sys_ck);
+	clk_set_rate(reset_virt_prcm_set_ck, rate);
+
+	/* XXX Should save the cmd argument for use after the reboot */
+
+	omap2xxx_prm_dpll_reset(); /* never returns */
+	while (1);
+}
+
+/**
+ * omap2xxx_common_look_up_clks_for_reset - look up clocks needed for restart
+ *
+ * Some clocks need to be looked up in advance for the SoC restart
+ * operation to work - see omap2xxx_restart().  Returns -EINVAL upon
+ * error or 0 upon success.
+ */
+static int __init omap2xxx_common_look_up_clks_for_reset(void)
+{
+	reset_virt_prcm_set_ck = clk_get(NULL, "virt_prcm_set");
+	if (IS_ERR(reset_virt_prcm_set_ck))
+		return -EINVAL;
+
+	reset_sys_ck = clk_get(NULL, "sys_ck");
+	if (IS_ERR(reset_sys_ck))
+		return -EINVAL;
+
+	return 0;
+}
+core_initcall(omap2xxx_common_look_up_clks_for_reset);

arch/arm/mach-omap2/omap3-restart.c

@@ -0,0 +1,36 @@
+/*
+ * omap3-restart.c - Code common to all OMAP3xxx machines.
+ *
+ * Copyright (C) 2009, 2012 Texas Instruments
+ * Copyright (C) 2010 Nokia Corporation
+ * Tony Lindgren <tony@atomide.com>
+ * Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include "iomap.h"
+#include "common.h"
+#include "control.h"
+#include "prm3xxx.h"
+
+/* Global address base setup code */
+
+/**
+ * omap3xxx_restart - trigger a software restart of the SoC
+ * @mode: the "reboot mode", see arch/arm/kernel/{setup,process}.c
+ * @cmd: passed from the userspace program rebooting the system (if provided)
+ *
+ * Resets the SoC.  For @cmd, see the 'reboot' syscall in
+ * kernel/sys.c.  No return value.
+ */
+void omap3xxx_restart(char mode, const char *cmd)
+{
+	omap3_ctrl_write_boot_mode((cmd ? (u8)*cmd : 0));
+	omap3xxx_prm_dpll3_reset(); /* never returns */
+	while (1);
+}

arch/arm/mach-omap2/omap4-common.c

@@ -27,9 +27,12 @@
 
 #include "omap-wakeupgen.h"
 #include "soc.h"
+#include "iomap.h"
 #include "common.h"
 #include "mmc.h"
 #include "hsmmc.h"
+#include "prminst44xx.h"
+#include "prcm_mpu44xx.h"
 #include "omap4-sar-layout.h"
 #include "omap-secure.h"
 #include "sram.h"
@@ -279,3 +282,19 @@ int __init omap4_twl6030_hsmmc_init(struct omap2_hsmmc_info *controllers)
 	return 0;
 }
 #endif
+
+/**
+ * omap44xx_restart - trigger a software restart of the SoC
+ * @mode: the "reboot mode", see arch/arm/kernel/{setup,process}.c
+ * @cmd: passed from the userspace program rebooting the system (if provided)
+ *
+ * Resets the SoC.  For @cmd, see the 'reboot' syscall in
+ * kernel/sys.c.  No return value.
+ */
+void omap44xx_restart(char mode, const char *cmd)
+{
+	/* XXX Should save 'cmd' into scratchpad for use after reboot */
+	omap4_prminst_global_warm_sw_reset(); /* never returns */
+	while (1);
+}
+

arch/arm/mach-omap2/omap_hwmod.c

@@ -141,25 +141,23 @@
 
 #include "clock.h"
 #include "omap_hwmod.h"
-#include <plat/prcm.h>
 
 #include "soc.h"
 #include "common.h"
 #include "clockdomain.h"
 #include "powerdomain.h"
-#include "cm2xxx_3xxx.h"
+#include "cm2xxx.h"
+#include "cm3xxx.h"
 #include "cminst44xx.h"
 #include "cm33xx.h"
-#include "prm2xxx_3xxx.h"
+#include "prm.h"
+#include "prm3xxx.h"
 #include "prm44xx.h"
 #include "prm33xx.h"
 #include "prminst44xx.h"
 #include "mux.h"
 #include "pm.h"
 
-/* Maximum microseconds to wait for OMAP module to softreset */
-#define MAX_MODULE_SOFTRESET_WAIT	10000
-
 /* Name of the OMAP hwmod for the MPU */
 #define MPU_INITIATOR_NAME		"mpu"
 
@@ -2063,7 +2061,8 @@ static int _enable(struct omap_hwmod *oh)
 			_enable_sysc(oh);
 		}
 	} else {
-		_omap4_disable_module(oh);
+		if (soc_ops.disable_module)
+			soc_ops.disable_module(oh);
 		_disable_clocks(oh);
 		pr_debug("omap_hwmod: %s: _wait_target_ready: %d\n",
 			 oh->name, r);
@@ -2668,7 +2667,7 @@ static int __init _alloc_linkspace(struct omap_hwmod_ocp_if **ois)
 /* Static functions intended only for use in soc_ops field function pointers */
 
 /**
- * _omap2_wait_target_ready - wait for a module to leave slave idle
+ * _omap2xxx_wait_target_ready - wait for a module to leave slave idle
  * @oh: struct omap_hwmod *
  *
  * Wait for a module @oh to leave slave idle.  Returns 0 if the module
@@ -2676,7 +2675,7 @@ static int __init _alloc_linkspace(struct omap_hwmod_ocp_if **ois)
  * slave idle; otherwise, pass along the return value of the
  * appropriate *_cm*_wait_module_ready() function.
  */
-static int _omap2_wait_target_ready(struct omap_hwmod *oh)
+static int _omap2xxx_wait_target_ready(struct omap_hwmod *oh)
 {
 	if (!oh)
 		return -EINVAL;
@@ -2689,9 +2688,36 @@ static int _omap2_wait_target_ready(struct omap_hwmod *oh)
 
 	/* XXX check module SIDLEMODE, hardreset status, enabled clocks */
 
-	return omap2_cm_wait_module_ready(oh->prcm.omap2.module_offs,
-					  oh->prcm.omap2.idlest_reg_id,
-					  oh->prcm.omap2.idlest_idle_bit);
+	return omap2xxx_cm_wait_module_ready(oh->prcm.omap2.module_offs,
+					     oh->prcm.omap2.idlest_reg_id,
+					     oh->prcm.omap2.idlest_idle_bit);
+}
+
+/**
+ * _omap3xxx_wait_target_ready - wait for a module to leave slave idle
+ * @oh: struct omap_hwmod *
+ *
+ * Wait for a module @oh to leave slave idle.  Returns 0 if the module
+ * does not have an IDLEST bit or if the module successfully leaves
+ * slave idle; otherwise, pass along the return value of the
+ * appropriate *_cm*_wait_module_ready() function.
+ */
+static int _omap3xxx_wait_target_ready(struct omap_hwmod *oh)
+{
+	if (!oh)
+		return -EINVAL;
+
+	if (oh->flags & HWMOD_NO_IDLEST)
+		return 0;
+
+	if (!_find_mpu_rt_port(oh))
+		return 0;
+
+	/* XXX check module SIDLEMODE, hardreset status, enabled clocks */
+
+	return omap3xxx_cm_wait_module_ready(oh->prcm.omap2.module_offs,
+					     oh->prcm.omap2.idlest_reg_id,
+					     oh->prcm.omap2.idlest_idle_bit);
 }
 
 /**
@@ -3959,8 +3985,13 @@ int omap_hwmod_pad_route_irq(struct omap_hwmod *oh, int pad_idx, int irq_idx)
  */
 void __init omap_hwmod_init(void)
 {
-	if (cpu_is_omap24xx() || cpu_is_omap34xx()) {
-		soc_ops.wait_target_ready = _omap2_wait_target_ready;
+	if (cpu_is_omap24xx()) {
+		soc_ops.wait_target_ready = _omap2xxx_wait_target_ready;
+		soc_ops.assert_hardreset = _omap2_assert_hardreset;
+		soc_ops.deassert_hardreset = _omap2_deassert_hardreset;
+		soc_ops.is_hardreset_asserted = _omap2_is_hardreset_asserted;
+	} else if (cpu_is_omap34xx()) {
+		soc_ops.wait_target_ready = _omap3xxx_wait_target_ready;
 		soc_ops.assert_hardreset = _omap2_assert_hardreset;
 		soc_ops.deassert_hardreset = _omap2_deassert_hardreset;
 		soc_ops.is_hardreset_asserted = _omap2_is_hardreset_asserted;

arch/arm/mach-omap2/pm24xx.c

@@ -43,9 +43,9 @@
 #include "soc.h"
 #include "common.h"
 #include "clock.h"
-#include "prm2xxx_3xxx.h"
+#include "prm2xxx.h"
 #include "prm-regbits-24xx.h"
-#include "cm2xxx_3xxx.h"
+#include "cm2xxx.h"
 #include "cm-regbits-24xx.h"
 #include "sdrc.h"
 #include "sram.h"

arch/arm/mach-omap2/pm34xx.c

@@ -38,17 +38,15 @@
 
 #include "clockdomain.h"
 #include "powerdomain.h"
-#include <plat/prcm.h>
 #include <plat-omap/dma-omap.h>
 
 #include "soc.h"
 #include "common.h"
-#include "cm2xxx_3xxx.h"
+#include "cm3xxx.h"
 #include "cm-regbits-34xx.h"
 #include "gpmc.h"
 #include "prm-regbits-34xx.h"
-
-#include "prm2xxx_3xxx.h"
+#include "prm3xxx.h"
 #include "pm.h"
 #include "sdrc.h"
 #include "sram.h"

arch/arm/mach-omap2/powerdomain.c

@@ -29,8 +29,6 @@
 
 #include <asm/cpu.h>
 
-#include <plat/prcm.h>
-
 #include "powerdomain.h"
 #include "clockdomain.h"
 

arch/arm/mach-omap2/powerdomain2xxx_3xxx.c

@@ -1,242 +0,0 @@
-/*
- * OMAP2 and OMAP3 powerdomain control
- *
- * Copyright (C) 2009-2011 Texas Instruments, Inc.
- * Copyright (C) 2007-2009 Nokia Corporation
- *
- * Derived from mach-omap2/powerdomain.c written by Paul Walmsley
- * Rajendra Nayak <rnayak@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/io.h>
-#include <linux/errno.h>
-#include <linux/delay.h>
-#include <linux/bug.h>
-
-#include <plat/prcm.h>
-
-#include "powerdomain.h"
-#include "prm.h"
-#include "prm-regbits-24xx.h"
-#include "prm-regbits-34xx.h"
-
-
-/* Common functions across OMAP2 and OMAP3 */
-static int omap2_pwrdm_set_next_pwrst(struct powerdomain *pwrdm, u8 pwrst)
-{
-	omap2_prm_rmw_mod_reg_bits(OMAP_POWERSTATE_MASK,
-				(pwrst << OMAP_POWERSTATE_SHIFT),
-				pwrdm->prcm_offs, OMAP2_PM_PWSTCTRL);
-	return 0;
-}
-
-static int omap2_pwrdm_read_next_pwrst(struct powerdomain *pwrdm)
-{
-	return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs,
-					     OMAP2_PM_PWSTCTRL,
-					     OMAP_POWERSTATE_MASK);
-}
-
-static int omap2_pwrdm_read_pwrst(struct powerdomain *pwrdm)
-{
-	return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs,
-					     OMAP2_PM_PWSTST,
-					     OMAP_POWERSTATEST_MASK);
-}
-
-static int omap2_pwrdm_set_mem_onst(struct powerdomain *pwrdm, u8 bank,
-								u8 pwrst)
-{
-	u32 m;
-
-	m = omap2_pwrdm_get_mem_bank_onstate_mask(bank);
-
-	omap2_prm_rmw_mod_reg_bits(m, (pwrst << __ffs(m)), pwrdm->prcm_offs,
-				   OMAP2_PM_PWSTCTRL);
-
-	return 0;
-}
-
-static int omap2_pwrdm_set_mem_retst(struct powerdomain *pwrdm, u8 bank,
-								u8 pwrst)
-{
-	u32 m;
-
-	m = omap2_pwrdm_get_mem_bank_retst_mask(bank);
-
-	omap2_prm_rmw_mod_reg_bits(m, (pwrst << __ffs(m)), pwrdm->prcm_offs,
-				   OMAP2_PM_PWSTCTRL);
-
-	return 0;
-}
-
-static int omap2_pwrdm_read_mem_pwrst(struct powerdomain *pwrdm, u8 bank)
-{
-	u32 m;
-
-	m = omap2_pwrdm_get_mem_bank_stst_mask(bank);
-
-	return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs, OMAP2_PM_PWSTST,
-					     m);
-}
-
-static int omap2_pwrdm_read_mem_retst(struct powerdomain *pwrdm, u8 bank)
-{
-	u32 m;
-
-	m = omap2_pwrdm_get_mem_bank_retst_mask(bank);
-
-	return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs,
-					     OMAP2_PM_PWSTCTRL, m);
-}
-
-static int omap2_pwrdm_set_logic_retst(struct powerdomain *pwrdm, u8 pwrst)
-{
-	u32 v;
-
-	v = pwrst << __ffs(OMAP3430_LOGICL1CACHERETSTATE_MASK);
-	omap2_prm_rmw_mod_reg_bits(OMAP3430_LOGICL1CACHERETSTATE_MASK, v,
-				   pwrdm->prcm_offs, OMAP2_PM_PWSTCTRL);
-
-	return 0;
-}
-
-static int omap2_pwrdm_wait_transition(struct powerdomain *pwrdm)
-{
-	u32 c = 0;
-
-	/*
-	 * REVISIT: pwrdm_wait_transition() may be better implemented
-	 * via a callback and a periodic timer check -- how long do we expect
-	 * powerdomain transitions to take?
-	 */
-
-	/* XXX Is this udelay() value meaningful? */
-	while ((omap2_prm_read_mod_reg(pwrdm->prcm_offs, OMAP2_PM_PWSTST) &
-		OMAP_INTRANSITION_MASK) &&
-		(c++ < PWRDM_TRANSITION_BAILOUT))
-			udelay(1);
-
-	if (c > PWRDM_TRANSITION_BAILOUT) {
-		pr_err("powerdomain: %s: waited too long to complete transition\n",
-		       pwrdm->name);
-		return -EAGAIN;
-	}
-
-	pr_debug("powerdomain: completed transition in %d loops\n", c);
-
-	return 0;
-}
-
-/* Applicable only for OMAP3. Not supported on OMAP2 */
-static int omap3_pwrdm_read_prev_pwrst(struct powerdomain *pwrdm)
-{
-	return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs,
-					     OMAP3430_PM_PREPWSTST,
-					     OMAP3430_LASTPOWERSTATEENTERED_MASK);
-}
-
-static int omap3_pwrdm_read_logic_pwrst(struct powerdomain *pwrdm)
-{
-	return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs,
-					     OMAP2_PM_PWSTST,
-					     OMAP3430_LOGICSTATEST_MASK);
-}
-
-static int omap3_pwrdm_read_logic_retst(struct powerdomain *pwrdm)
-{
-	return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs,
-					     OMAP2_PM_PWSTCTRL,
-					     OMAP3430_LOGICSTATEST_MASK);
-}
-
-static int omap3_pwrdm_read_prev_logic_pwrst(struct powerdomain *pwrdm)
-{
-	return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs,
-					     OMAP3430_PM_PREPWSTST,
-					     OMAP3430_LASTLOGICSTATEENTERED_MASK);
-}
-
-static int omap3_get_mem_bank_lastmemst_mask(u8 bank)
-{
-	switch (bank) {
-	case 0:
-		return OMAP3430_LASTMEM1STATEENTERED_MASK;
-	case 1:
-		return OMAP3430_LASTMEM2STATEENTERED_MASK;
-	case 2:
-		return OMAP3430_LASTSHAREDL2CACHEFLATSTATEENTERED_MASK;
-	case 3:
-		return OMAP3430_LASTL2FLATMEMSTATEENTERED_MASK;
-	default:
-		WARN_ON(1); /* should never happen */
-		return -EEXIST;
-	}
-	return 0;
-}
-
-static int omap3_pwrdm_read_prev_mem_pwrst(struct powerdomain *pwrdm, u8 bank)
-{
-	u32 m;
-
-	m = omap3_get_mem_bank_lastmemst_mask(bank);
-
-	return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs,
-				OMAP3430_PM_PREPWSTST, m);
-}
-
-static int omap3_pwrdm_clear_all_prev_pwrst(struct powerdomain *pwrdm)
-{
-	omap2_prm_write_mod_reg(0, pwrdm->prcm_offs, OMAP3430_PM_PREPWSTST);
-	return 0;
-}
-
-static int omap3_pwrdm_enable_hdwr_sar(struct powerdomain *pwrdm)
-{
-	return omap2_prm_rmw_mod_reg_bits(0,
-					  1 << OMAP3430ES2_SAVEANDRESTORE_SHIFT,
-					  pwrdm->prcm_offs, OMAP2_PM_PWSTCTRL);
-}
-
-static int omap3_pwrdm_disable_hdwr_sar(struct powerdomain *pwrdm)
-{
-	return omap2_prm_rmw_mod_reg_bits(1 << OMAP3430ES2_SAVEANDRESTORE_SHIFT,
-					  0, pwrdm->prcm_offs,
-					  OMAP2_PM_PWSTCTRL);
-}
-
-struct pwrdm_ops omap2_pwrdm_operations = {
-	.pwrdm_set_next_pwrst	= omap2_pwrdm_set_next_pwrst,
-	.pwrdm_read_next_pwrst	= omap2_pwrdm_read_next_pwrst,
-	.pwrdm_read_pwrst	= omap2_pwrdm_read_pwrst,
-	.pwrdm_set_logic_retst	= omap2_pwrdm_set_logic_retst,
-	.pwrdm_set_mem_onst	= omap2_pwrdm_set_mem_onst,
-	.pwrdm_set_mem_retst	= omap2_pwrdm_set_mem_retst,
-	.pwrdm_read_mem_pwrst	= omap2_pwrdm_read_mem_pwrst,
-	.pwrdm_read_mem_retst	= omap2_pwrdm_read_mem_retst,
-	.pwrdm_wait_transition	= omap2_pwrdm_wait_transition,
-};
-
-struct pwrdm_ops omap3_pwrdm_operations = {
-	.pwrdm_set_next_pwrst	= omap2_pwrdm_set_next_pwrst,
-	.pwrdm_read_next_pwrst	= omap2_pwrdm_read_next_pwrst,
-	.pwrdm_read_pwrst	= omap2_pwrdm_read_pwrst,
-	.pwrdm_read_prev_pwrst	= omap3_pwrdm_read_prev_pwrst,
-	.pwrdm_set_logic_retst	= omap2_pwrdm_set_logic_retst,
-	.pwrdm_read_logic_pwrst	= omap3_pwrdm_read_logic_pwrst,
-	.pwrdm_read_logic_retst	= omap3_pwrdm_read_logic_retst,
-	.pwrdm_read_prev_logic_pwrst	= omap3_pwrdm_read_prev_logic_pwrst,
-	.pwrdm_set_mem_onst	= omap2_pwrdm_set_mem_onst,
-	.pwrdm_set_mem_retst	= omap2_pwrdm_set_mem_retst,
-	.pwrdm_read_mem_pwrst	= omap2_pwrdm_read_mem_pwrst,
-	.pwrdm_read_mem_retst	= omap2_pwrdm_read_mem_retst,
-	.pwrdm_read_prev_mem_pwrst	= omap3_pwrdm_read_prev_mem_pwrst,
-	.pwrdm_clear_all_prev_pwrst	= omap3_pwrdm_clear_all_prev_pwrst,
-	.pwrdm_enable_hdwr_sar	= omap3_pwrdm_enable_hdwr_sar,
-	.pwrdm_disable_hdwr_sar	= omap3_pwrdm_disable_hdwr_sar,
-	.pwrdm_wait_transition	= omap2_pwrdm_wait_transition,
-};

arch/arm/mach-omap2/powerdomain33xx.c

@@ -1,229 +0,0 @@
-/*
- * AM33XX Powerdomain control
- *
- * Copyright (C) 2011-2012 Texas Instruments Incorporated - http://www.ti.com/
- *
- * Derived from mach-omap2/powerdomain44xx.c written by Rajendra Nayak
- * <rnayak@ti.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <linux/io.h>
-#include <linux/errno.h>
-#include <linux/delay.h>
-
-#include <plat/prcm.h>
-
-#include "powerdomain.h"
-#include "prm33xx.h"
-#include "prm-regbits-33xx.h"
-
-
-static int am33xx_pwrdm_set_next_pwrst(struct powerdomain *pwrdm, u8 pwrst)
-{
-	am33xx_prm_rmw_reg_bits(OMAP_POWERSTATE_MASK,
-				(pwrst << OMAP_POWERSTATE_SHIFT),
-				pwrdm->prcm_offs, pwrdm->pwrstctrl_offs);
-	return 0;
-}
-
-static int am33xx_pwrdm_read_next_pwrst(struct powerdomain *pwrdm)
-{
-	u32 v;
-
-	v = am33xx_prm_read_reg(pwrdm->prcm_offs,  pwrdm->pwrstctrl_offs);
-	v &= OMAP_POWERSTATE_MASK;
-	v >>= OMAP_POWERSTATE_SHIFT;
-
-	return v;
-}
-
-static int am33xx_pwrdm_read_pwrst(struct powerdomain *pwrdm)
-{
-	u32 v;
-
-	v = am33xx_prm_read_reg(pwrdm->prcm_offs, pwrdm->pwrstst_offs);
-	v &= OMAP_POWERSTATEST_MASK;
-	v >>= OMAP_POWERSTATEST_SHIFT;
-
-	return v;
-}
-
-static int am33xx_pwrdm_read_prev_pwrst(struct powerdomain *pwrdm)
-{
-	u32 v;
-
-	v = am33xx_prm_read_reg(pwrdm->prcm_offs, pwrdm->pwrstst_offs);
-	v &= AM33XX_LASTPOWERSTATEENTERED_MASK;
-	v >>= AM33XX_LASTPOWERSTATEENTERED_SHIFT;
-
-	return v;
-}
-
-static int am33xx_pwrdm_set_lowpwrstchange(struct powerdomain *pwrdm)
-{
-	am33xx_prm_rmw_reg_bits(AM33XX_LOWPOWERSTATECHANGE_MASK,
-				(1 << AM33XX_LOWPOWERSTATECHANGE_SHIFT),
-				pwrdm->prcm_offs, pwrdm->pwrstctrl_offs);
-	return 0;
-}
-
-static int am33xx_pwrdm_clear_all_prev_pwrst(struct powerdomain *pwrdm)
-{
-	am33xx_prm_rmw_reg_bits(AM33XX_LASTPOWERSTATEENTERED_MASK,
-				AM33XX_LASTPOWERSTATEENTERED_MASK,
-				pwrdm->prcm_offs, pwrdm->pwrstst_offs);
-	return 0;
-}
-
-static int am33xx_pwrdm_set_logic_retst(struct powerdomain *pwrdm, u8 pwrst)
-{
-	u32 m;
-
-	m = pwrdm->logicretstate_mask;
-	if (!m)
-		return -EINVAL;
-
-	am33xx_prm_rmw_reg_bits(m, (pwrst << __ffs(m)),
-				pwrdm->prcm_offs, pwrdm->pwrstctrl_offs);
-
-	return 0;
-}
-
-static int am33xx_pwrdm_read_logic_pwrst(struct powerdomain *pwrdm)
-{
-	u32 v;
-
-	v = am33xx_prm_read_reg(pwrdm->prcm_offs, pwrdm->pwrstst_offs);
-	v &= AM33XX_LOGICSTATEST_MASK;
-	v >>= AM33XX_LOGICSTATEST_SHIFT;
-
-	return v;
-}
-
-static int am33xx_pwrdm_read_logic_retst(struct powerdomain *pwrdm)
-{
-	u32 v, m;
-
-	m = pwrdm->logicretstate_mask;
-	if (!m)
-		return -EINVAL;
-
-	v = am33xx_prm_read_reg(pwrdm->prcm_offs, pwrdm->pwrstctrl_offs);
-	v &= m;
-	v >>= __ffs(m);
-
-	return v;
-}
-
-static int am33xx_pwrdm_set_mem_onst(struct powerdomain *pwrdm, u8 bank,
-		u8 pwrst)
-{
-	u32 m;
-
-	m = pwrdm->mem_on_mask[bank];
-	if (!m)
-		return -EINVAL;
-
-	am33xx_prm_rmw_reg_bits(m, (pwrst << __ffs(m)),
-				pwrdm->prcm_offs, pwrdm->pwrstctrl_offs);
-
-	return 0;
-}
-
-static int am33xx_pwrdm_set_mem_retst(struct powerdomain *pwrdm, u8 bank,
-					u8 pwrst)
-{
-	u32 m;
-
-	m = pwrdm->mem_ret_mask[bank];
-	if (!m)
-		return -EINVAL;
-
-	am33xx_prm_rmw_reg_bits(m, (pwrst << __ffs(m)),
-				pwrdm->prcm_offs, pwrdm->pwrstctrl_offs);
-
-	return 0;
-}
-
-static int am33xx_pwrdm_read_mem_pwrst(struct powerdomain *pwrdm, u8 bank)
-{
-	u32 m, v;
-
-	m = pwrdm->mem_pwrst_mask[bank];
-	if (!m)
-		return -EINVAL;
-
-	v = am33xx_prm_read_reg(pwrdm->prcm_offs, pwrdm->pwrstst_offs);
-	v &= m;
-	v >>= __ffs(m);
-
-	return v;
-}
-
-static int am33xx_pwrdm_read_mem_retst(struct powerdomain *pwrdm, u8 bank)
-{
-	u32 m, v;
-
-	m = pwrdm->mem_retst_mask[bank];
-	if (!m)
-		return -EINVAL;
-
-	v = am33xx_prm_read_reg(pwrdm->prcm_offs, pwrdm->pwrstctrl_offs);
-	v &= m;
-	v >>= __ffs(m);
-
-	return v;
-}
-
-static int am33xx_pwrdm_wait_transition(struct powerdomain *pwrdm)
-{
-	u32 c = 0;
-
-	/*
-	 * REVISIT: pwrdm_wait_transition() may be better implemented
-	 * via a callback and a periodic timer check -- how long do we expect
-	 * powerdomain transitions to take?
-	 */
-
-	/* XXX Is this udelay() value meaningful? */
-	while ((am33xx_prm_read_reg(pwrdm->prcm_offs, pwrdm->pwrstst_offs)
-			& OMAP_INTRANSITION_MASK) &&
-			(c++ < PWRDM_TRANSITION_BAILOUT))
-		udelay(1);
-
-	if (c > PWRDM_TRANSITION_BAILOUT) {
-		pr_err("powerdomain: %s: waited too long to complete transition\n",
-		       pwrdm->name);
-		return -EAGAIN;
-	}
-
-	pr_debug("powerdomain: completed transition in %d loops\n", c);
-
-	return 0;
-}
-
-struct pwrdm_ops am33xx_pwrdm_operations = {
-	.pwrdm_set_next_pwrst		= am33xx_pwrdm_set_next_pwrst,
-	.pwrdm_read_next_pwrst		= am33xx_pwrdm_read_next_pwrst,
-	.pwrdm_read_pwrst		= am33xx_pwrdm_read_pwrst,
-	.pwrdm_read_prev_pwrst		= am33xx_pwrdm_read_prev_pwrst,
-	.pwrdm_set_logic_retst		= am33xx_pwrdm_set_logic_retst,
-	.pwrdm_read_logic_pwrst		= am33xx_pwrdm_read_logic_pwrst,
-	.pwrdm_read_logic_retst		= am33xx_pwrdm_read_logic_retst,
-	.pwrdm_clear_all_prev_pwrst	= am33xx_pwrdm_clear_all_prev_pwrst,
-	.pwrdm_set_lowpwrstchange	= am33xx_pwrdm_set_lowpwrstchange,
-	.pwrdm_read_mem_pwrst		= am33xx_pwrdm_read_mem_pwrst,
-	.pwrdm_read_mem_retst		= am33xx_pwrdm_read_mem_retst,
-	.pwrdm_set_mem_onst		= am33xx_pwrdm_set_mem_onst,
-	.pwrdm_set_mem_retst		= am33xx_pwrdm_set_mem_retst,
-	.pwrdm_wait_transition		= am33xx_pwrdm_wait_transition,
-};

arch/arm/mach-omap2/powerdomain44xx.c

@@ -1,285 +0,0 @@
-/*
- * OMAP4 powerdomain control
- *
- * Copyright (C) 2009-2010, 2012 Texas Instruments, Inc.
- * Copyright (C) 2007-2009 Nokia Corporation
- *
- * Derived from mach-omap2/powerdomain.c written by Paul Walmsley
- * Rajendra Nayak <rnayak@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/io.h>
-#include <linux/errno.h>
-#include <linux/delay.h>
-#include <linux/bug.h>
-
-#include "powerdomain.h"
-#include <plat/prcm.h>
-#include "prm2xxx_3xxx.h"
-#include "prm44xx.h"
-#include "prminst44xx.h"
-#include "prm-regbits-44xx.h"
-
-static int omap4_pwrdm_set_next_pwrst(struct powerdomain *pwrdm, u8 pwrst)
-{
-	omap4_prminst_rmw_inst_reg_bits(OMAP_POWERSTATE_MASK,
-					(pwrst << OMAP_POWERSTATE_SHIFT),
-					pwrdm->prcm_partition,
-					pwrdm->prcm_offs, OMAP4_PM_PWSTCTRL);
-	return 0;
-}
-
-static int omap4_pwrdm_read_next_pwrst(struct powerdomain *pwrdm)
-{
-	u32 v;
-
-	v = omap4_prminst_read_inst_reg(pwrdm->prcm_partition, pwrdm->prcm_offs,
-					OMAP4_PM_PWSTCTRL);
-	v &= OMAP_POWERSTATE_MASK;
-	v >>= OMAP_POWERSTATE_SHIFT;
-
-	return v;
-}
-
-static int omap4_pwrdm_read_pwrst(struct powerdomain *pwrdm)
-{
-	u32 v;
-
-	v = omap4_prminst_read_inst_reg(pwrdm->prcm_partition, pwrdm->prcm_offs,
-					OMAP4_PM_PWSTST);
-	v &= OMAP_POWERSTATEST_MASK;
-	v >>= OMAP_POWERSTATEST_SHIFT;
-
-	return v;
-}
-
-static int omap4_pwrdm_read_prev_pwrst(struct powerdomain *pwrdm)
-{
-	u32 v;
-
-	v = omap4_prminst_read_inst_reg(pwrdm->prcm_partition, pwrdm->prcm_offs,
-					OMAP4_PM_PWSTST);
-	v &= OMAP4430_LASTPOWERSTATEENTERED_MASK;
-	v >>= OMAP4430_LASTPOWERSTATEENTERED_SHIFT;
-
-	return v;
-}
-
-static int omap4_pwrdm_set_lowpwrstchange(struct powerdomain *pwrdm)
-{
-	omap4_prminst_rmw_inst_reg_bits(OMAP4430_LOWPOWERSTATECHANGE_MASK,
-					(1 << OMAP4430_LOWPOWERSTATECHANGE_SHIFT),
-					pwrdm->prcm_partition,
-					pwrdm->prcm_offs, OMAP4_PM_PWSTCTRL);
-	return 0;
-}
-
-static int omap4_pwrdm_clear_all_prev_pwrst(struct powerdomain *pwrdm)
-{
-	omap4_prminst_rmw_inst_reg_bits(OMAP4430_LASTPOWERSTATEENTERED_MASK,
-					OMAP4430_LASTPOWERSTATEENTERED_MASK,
-					pwrdm->prcm_partition,
-					pwrdm->prcm_offs, OMAP4_PM_PWSTST);
-	return 0;
-}
-
-static int omap4_pwrdm_set_logic_retst(struct powerdomain *pwrdm, u8 pwrst)
-{
-	u32 v;
-
-	v = pwrst << __ffs(OMAP4430_LOGICRETSTATE_MASK);
-	omap4_prminst_rmw_inst_reg_bits(OMAP4430_LOGICRETSTATE_MASK, v,
-					pwrdm->prcm_partition, pwrdm->prcm_offs,
-					OMAP4_PM_PWSTCTRL);
-
-	return 0;
-}
-
-static int omap4_pwrdm_set_mem_onst(struct powerdomain *pwrdm, u8 bank,
-				    u8 pwrst)
-{
-	u32 m;
-
-	m = omap2_pwrdm_get_mem_bank_onstate_mask(bank);
-
-	omap4_prminst_rmw_inst_reg_bits(m, (pwrst << __ffs(m)),
-					pwrdm->prcm_partition, pwrdm->prcm_offs,
-					OMAP4_PM_PWSTCTRL);
-
-	return 0;
-}
-
-static int omap4_pwrdm_set_mem_retst(struct powerdomain *pwrdm, u8 bank,
-				     u8 pwrst)
-{
-	u32 m;
-
-	m = omap2_pwrdm_get_mem_bank_retst_mask(bank);
-
-	omap4_prminst_rmw_inst_reg_bits(m, (pwrst << __ffs(m)),
-					pwrdm->prcm_partition, pwrdm->prcm_offs,
-					OMAP4_PM_PWSTCTRL);
-
-	return 0;
-}
-
-static int omap4_pwrdm_read_logic_pwrst(struct powerdomain *pwrdm)
-{
-	u32 v;
-
-	v = omap4_prminst_read_inst_reg(pwrdm->prcm_partition, pwrdm->prcm_offs,
-					OMAP4_PM_PWSTST);
-	v &= OMAP4430_LOGICSTATEST_MASK;
-	v >>= OMAP4430_LOGICSTATEST_SHIFT;
-
-	return v;
-}
-
-static int omap4_pwrdm_read_logic_retst(struct powerdomain *pwrdm)
-{
-	u32 v;
-
-	v = omap4_prminst_read_inst_reg(pwrdm->prcm_partition, pwrdm->prcm_offs,
-					OMAP4_PM_PWSTCTRL);
-	v &= OMAP4430_LOGICRETSTATE_MASK;
-	v >>= OMAP4430_LOGICRETSTATE_SHIFT;
-
-	return v;
-}
-
-/**
- * omap4_pwrdm_read_prev_logic_pwrst - read the previous logic powerstate
- * @pwrdm: struct powerdomain * to read the state for
- *
- * Reads the previous logic powerstate for a powerdomain. This
- * function must determine the previous logic powerstate by first
- * checking the previous powerstate for the domain. If that was OFF,
- * then logic has been lost. If previous state was RETENTION, the
- * function reads the setting for the next retention logic state to
- * see the actual value.  In every other case, the logic is
- * retained. Returns either PWRDM_POWER_OFF or PWRDM_POWER_RET
- * depending whether the logic was retained or not.
- */
-static int omap4_pwrdm_read_prev_logic_pwrst(struct powerdomain *pwrdm)
-{
-	int state;
-
-	state = omap4_pwrdm_read_prev_pwrst(pwrdm);
-
-	if (state == PWRDM_POWER_OFF)
-		return PWRDM_POWER_OFF;
-
-	if (state != PWRDM_POWER_RET)
-		return PWRDM_POWER_RET;
-
-	return omap4_pwrdm_read_logic_retst(pwrdm);
-}
-
-static int omap4_pwrdm_read_mem_pwrst(struct powerdomain *pwrdm, u8 bank)
-{
-	u32 m, v;
-
-	m = omap2_pwrdm_get_mem_bank_stst_mask(bank);
-
-	v = omap4_prminst_read_inst_reg(pwrdm->prcm_partition, pwrdm->prcm_offs,
-					OMAP4_PM_PWSTST);
-	v &= m;
-	v >>= __ffs(m);
-
-	return v;
-}
-
-static int omap4_pwrdm_read_mem_retst(struct powerdomain *pwrdm, u8 bank)
-{
-	u32 m, v;
-
-	m = omap2_pwrdm_get_mem_bank_retst_mask(bank);
-
-	v = omap4_prminst_read_inst_reg(pwrdm->prcm_partition, pwrdm->prcm_offs,
-					OMAP4_PM_PWSTCTRL);
-	v &= m;
-	v >>= __ffs(m);
-
-	return v;
-}
-
-/**
- * omap4_pwrdm_read_prev_mem_pwrst - reads the previous memory powerstate
- * @pwrdm: struct powerdomain * to read mem powerstate for
- * @bank: memory bank index
- *
- * Reads the previous memory powerstate for a powerdomain. This
- * function must determine the previous memory powerstate by first
- * checking the previous powerstate for the domain. If that was OFF,
- * then logic has been lost. If previous state was RETENTION, the
- * function reads the setting for the next memory retention state to
- * see the actual value.  In every other case, the logic is
- * retained. Returns either PWRDM_POWER_OFF or PWRDM_POWER_RET
- * depending whether logic was retained or not.
- */
-static int omap4_pwrdm_read_prev_mem_pwrst(struct powerdomain *pwrdm, u8 bank)
-{
-	int state;
-
-	state = omap4_pwrdm_read_prev_pwrst(pwrdm);
-
-	if (state == PWRDM_POWER_OFF)
-		return PWRDM_POWER_OFF;
-
-	if (state != PWRDM_POWER_RET)
-		return PWRDM_POWER_RET;
-
-	return omap4_pwrdm_read_mem_retst(pwrdm, bank);
-}
-
-static int omap4_pwrdm_wait_transition(struct powerdomain *pwrdm)
-{
-	u32 c = 0;
-
-	/*
-	 * REVISIT: pwrdm_wait_transition() may be better implemented
-	 * via a callback and a periodic timer check -- how long do we expect
-	 * powerdomain transitions to take?
-	 */
-
-	/* XXX Is this udelay() value meaningful? */
-	while ((omap4_prminst_read_inst_reg(pwrdm->prcm_partition,
-					    pwrdm->prcm_offs,
-					    OMAP4_PM_PWSTST) &
-		OMAP_INTRANSITION_MASK) &&
-	       (c++ < PWRDM_TRANSITION_BAILOUT))
-		udelay(1);
-
-	if (c > PWRDM_TRANSITION_BAILOUT) {
-		pr_err("powerdomain: %s: waited too long to complete transition\n",
-		       pwrdm->name);
-		return -EAGAIN;
-	}
-
-	pr_debug("powerdomain: completed transition in %d loops\n", c);
-
-	return 0;
-}
-
-struct pwrdm_ops omap4_pwrdm_operations = {
-	.pwrdm_set_next_pwrst	= omap4_pwrdm_set_next_pwrst,
-	.pwrdm_read_next_pwrst	= omap4_pwrdm_read_next_pwrst,
-	.pwrdm_read_pwrst	= omap4_pwrdm_read_pwrst,
-	.pwrdm_read_prev_pwrst	= omap4_pwrdm_read_prev_pwrst,
-	.pwrdm_set_lowpwrstchange	= omap4_pwrdm_set_lowpwrstchange,
-	.pwrdm_clear_all_prev_pwrst	= omap4_pwrdm_clear_all_prev_pwrst,
-	.pwrdm_set_logic_retst	= omap4_pwrdm_set_logic_retst,
-	.pwrdm_read_logic_pwrst	= omap4_pwrdm_read_logic_pwrst,
-	.pwrdm_read_prev_logic_pwrst	= omap4_pwrdm_read_prev_logic_pwrst,
-	.pwrdm_read_logic_retst	= omap4_pwrdm_read_logic_retst,
-	.pwrdm_read_mem_pwrst	= omap4_pwrdm_read_mem_pwrst,
-	.pwrdm_read_mem_retst	= omap4_pwrdm_read_mem_retst,
-	.pwrdm_read_prev_mem_pwrst	= omap4_pwrdm_read_prev_mem_pwrst,
-	.pwrdm_set_mem_onst	= omap4_pwrdm_set_mem_onst,
-	.pwrdm_set_mem_retst	= omap4_pwrdm_set_mem_retst,
-	.pwrdm_wait_transition	= omap4_pwrdm_wait_transition,
-};

arch/arm/mach-omap2/prcm-common.h

@@ -406,11 +406,6 @@
 #define OMAP3430_EN_CORE_MASK				(1 << 0)
 
 
-/*
- * MAX_MODULE_HARDRESET_WAIT: Maximum microseconds to wait for an OMAP
- * submodule to exit hardreset
- */
-#define MAX_MODULE_HARDRESET_WAIT		10000
 
 /*
  * Maximum time(us) it takes to output the signal WUCLKOUT of the last
@@ -419,24 +414,7 @@
  * microseconds on OMAP4, so this timeout may be too high.
  */
 #define MAX_IOPAD_LATCH_TIME			100
-
 # ifndef __ASSEMBLER__
-extern void __iomem *prm_base;
-extern void __iomem *cm_base;
-extern void __iomem *cm2_base;
-extern void __iomem *prcm_mpu_base;
-
-#if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5)
-extern void omap_prm_base_init(void);
-extern void omap_cm_base_init(void);
-#else
-static inline void omap_prm_base_init(void)
-{
-}
-static inline void omap_cm_base_init(void)
-{
-}
-#endif
 
 /**
  * struct omap_prcm_irq - describes a PRCM interrupt bit

arch/arm/mach-omap2/prcm.c

@@ -1,189 +0,0 @@
-/*
- * linux/arch/arm/mach-omap2/prcm.c
- *
- * OMAP 24xx Power Reset and Clock Management (PRCM) functions
- *
- * Copyright (C) 2005 Nokia Corporation
- *
- * Written by Tony Lindgren <tony.lindgren@nokia.com>
- *
- * Copyright (C) 2007 Texas Instruments, Inc.
- * Rajendra Nayak <rnayak@ti.com>
- *
- * Some pieces of code Copyright (C) 2005 Texas Instruments, Inc.
- * Upgraded with OMAP4 support by Abhijit Pagare <abhijitpagare@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/delay.h>
-#include <linux/export.h>
-
-#include "common.h"
-#include <plat/prcm.h>
-
-#include "soc.h"
-#include "clock.h"
-#include "clock2xxx.h"
-#include "cm2xxx_3xxx.h"
-#include "prm2xxx_3xxx.h"
-#include "prm44xx.h"
-#include "prminst44xx.h"
-#include "cminst44xx.h"
-#include "prm-regbits-24xx.h"
-#include "prm-regbits-44xx.h"
-#include "control.h"
-
-void __iomem *prm_base;
-void __iomem *cm_base;
-void __iomem *cm2_base;
-void __iomem *prcm_mpu_base;
-
-#define MAX_MODULE_ENABLE_WAIT		100000
-
-u32 omap_prcm_get_reset_sources(void)
-{
-	/* XXX This presumably needs modification for 34XX */
-	if (cpu_is_omap24xx() || cpu_is_omap34xx())
-		return omap2_prm_read_mod_reg(WKUP_MOD, OMAP2_RM_RSTST) & 0x7f;
-	if (cpu_is_omap44xx())
-		return omap2_prm_read_mod_reg(WKUP_MOD, OMAP4_RM_RSTST) & 0x7f;
-
-	return 0;
-}
-EXPORT_SYMBOL(omap_prcm_get_reset_sources);
-
-/* Resets clock rates and reboots the system. Only called from system.h */
-void omap_prcm_restart(char mode, const char *cmd)
-{
-	s16 prcm_offs = 0;
-
-	if (cpu_is_omap24xx()) {
-		omap2xxx_clk_prepare_for_reboot();
-
-		prcm_offs = WKUP_MOD;
-	} else if (cpu_is_omap34xx()) {
-		prcm_offs = OMAP3430_GR_MOD;
-		omap3_ctrl_write_boot_mode((cmd ? (u8)*cmd : 0));
-	} else if (cpu_is_omap44xx()) {
-		omap4_prminst_global_warm_sw_reset(); /* never returns */
-	} else {
-		WARN_ON(1);
-	}
-
-	/*
-	 * As per Errata i520, in some cases, user will not be able to
-	 * access DDR memory after warm-reset.
-	 * This situation occurs while the warm-reset happens during a read
-	 * access to DDR memory. In that particular condition, DDR memory
-	 * does not respond to a corrupted read command due to the warm
-	 * reset occurrence but SDRC is waiting for read completion.
-	 * SDRC is not sensitive to the warm reset, but the interconnect is
-	 * reset on the fly, thus causing a misalignment between SDRC logic,
-	 * interconnect logic and DDR memory state.
-	 * WORKAROUND:
-	 * Steps to perform before a Warm reset is trigged:
-	 * 1. enable self-refresh on idle request
-	 * 2. put SDRC in idle
-	 * 3. wait until SDRC goes to idle
-	 * 4. generate SW reset (Global SW reset)
-	 *
-	 * Steps to be performed after warm reset occurs (in bootloader):
-	 * if HW warm reset is the source, apply below steps before any
-	 * accesses to SDRAM:
-	 * 1. Reset SMS and SDRC and wait till reset is complete
-	 * 2. Re-initialize SMS, SDRC and memory
-	 *
-	 * NOTE: Above work around is required only if arch reset is implemented
-	 * using Global SW reset(GLOBAL_SW_RST). DPLL3 reset does not need
-	 * the WA since it resets SDRC as well as part of cold reset.
-	 */
-
-	/* XXX should be moved to some OMAP2/3 specific code */
-	omap2_prm_set_mod_reg_bits(OMAP_RST_DPLL3_MASK, prcm_offs,
-				   OMAP2_RM_RSTCTRL);
-	omap2_prm_read_mod_reg(prcm_offs, OMAP2_RM_RSTCTRL); /* OCP barrier */
-}
-
-/**
- * omap2_cm_wait_idlest - wait for IDLEST bit to indicate module readiness
- * @reg: physical address of module IDLEST register
- * @mask: value to mask against to determine if the module is active
- * @idlest: idle state indicator (0 or 1) for the clock
- * @name: name of the clock (for printk)
- *
- * Returns 1 if the module indicated readiness in time, or 0 if it
- * failed to enable in roughly MAX_MODULE_ENABLE_WAIT microseconds.
- *
- * XXX This function is deprecated.  It should be removed once the
- * hwmod conversion is complete.
- */
-int omap2_cm_wait_idlest(void __iomem *reg, u32 mask, u8 idlest,
-				const char *name)
-{
-	int i = 0;
-	int ena = 0;
-
-	if (idlest)
-		ena = 0;
-	else
-		ena = mask;
-
-	/* Wait for lock */
-	omap_test_timeout(((__raw_readl(reg) & mask) == ena),
-			  MAX_MODULE_ENABLE_WAIT, i);
-
-	if (i < MAX_MODULE_ENABLE_WAIT)
-		pr_debug("cm: Module associated with clock %s ready after %d loops\n",
-			 name, i);
-	else
-		pr_err("cm: Module associated with clock %s didn't enable in %d tries\n",
-		       name, MAX_MODULE_ENABLE_WAIT);
-
-	return (i < MAX_MODULE_ENABLE_WAIT) ? 1 : 0;
-};
-
-void __init omap2_set_globals_prcm(struct omap_globals *omap2_globals)
-{
-	if (omap2_globals->prm)
-		prm_base = omap2_globals->prm;
-	if (omap2_globals->cm)
-		cm_base = omap2_globals->cm;
-	if (omap2_globals->cm2)
-		cm2_base = omap2_globals->cm2;
-	if (omap2_globals->prcm_mpu)
-		prcm_mpu_base = omap2_globals->prcm_mpu;
-
-	if (cpu_is_omap44xx() || soc_is_omap54xx()) {
-		omap_prm_base_init();
-		omap_cm_base_init();
-	}
-}
-
-/*
- * Stubbed functions so that common files continue to build when
- * custom builds are used
- * XXX These are temporary and should be removed at the earliest possible
- * opportunity
- */
-int __weak omap4_cminst_wait_module_idle(u8 part, u16 inst, s16 cdoffs,
-					u16 clkctrl_offs)
-{
-	return 0;
-}
-
-void __weak omap4_cminst_module_enable(u8 mode, u8 part, u16 inst,
-				s16 cdoffs, u16 clkctrl_offs)
-{
-}
-
-void __weak omap4_cminst_module_disable(u8 part, u16 inst, s16 cdoffs,
-				 u16 clkctrl_offs)
-{
-}

arch/arm/mach-omap2/prcm_mpu44xx.c

@@ -20,6 +20,12 @@
 #include "prcm_mpu44xx.h"
 #include "cm-regbits-44xx.h"
 
+/*
+ * prcm_mpu_base: the virtual address of the start of the PRCM_MPU IP
+ *   block registers
+ */
+void __iomem *prcm_mpu_base;
+
 /* PRCM_MPU low-level functions */
 
 u32 omap4_prcm_mpu_read_inst_reg(s16 inst, u16 reg)
@@ -43,3 +49,14 @@ u32 omap4_prcm_mpu_rmw_inst_reg_bits(u32 mask, u32 bits, s16 inst, s16 reg)
 
 	return v;
 }
+
+/**
+ * omap2_set_globals_prcm_mpu - set the MPU PRCM base address (for early use)
+ * @prcm_mpu: PRCM_MPU base virtual address
+ *
+ * XXX Will be replaced when the PRM/CM drivers are completed.
+ */
+void __init omap2_set_globals_prcm_mpu(void __iomem *prcm_mpu)
+{
+	prcm_mpu_base = prcm_mpu;
+}

arch/arm/mach-omap2/prcm_mpu44xx.h

@@ -1,7 +1,7 @@
 /*
  * OMAP44xx PRCM MPU instance offset macros
  *
- * Copyright (C) 2010 Texas Instruments, Inc.
+ * Copyright (C) 2010, 2012 Texas Instruments, Inc.
  * Copyright (C) 2010 Nokia Corporation
  *
  * Paul Walmsley (paul@pwsan.com)
@@ -25,6 +25,12 @@
 #ifndef __ARCH_ARM_MACH_OMAP2_PRCM_MPU44XX_H
 #define __ARCH_ARM_MACH_OMAP2_PRCM_MPU44XX_H
 
+#include "common.h"
+
+# ifndef __ASSEMBLER__
+extern void __iomem *prcm_mpu_base;
+# endif
+
 #define OMAP4430_PRCM_MPU_BASE			0x48243000
 
 #define OMAP44XX_PRCM_MPU_REGADDR(inst, reg)				\
@@ -98,6 +104,7 @@ extern u32 omap4_prcm_mpu_read_inst_reg(s16 inst, u16 idx);
 extern void omap4_prcm_mpu_write_inst_reg(u32 val, s16 inst, u16 idx);
 extern u32 omap4_prcm_mpu_rmw_inst_reg_bits(u32 mask, u32 bits, s16 inst,
 					    s16 idx);
+extern void __init omap2_set_globals_prcm_mpu(void __iomem *prcm_mpu);
 # endif
 
 #endif

arch/arm/mach-omap2/prm-regbits-24xx.h

@@ -14,7 +14,7 @@
  * published by the Free Software Foundation.
  */
 
-#include "prm2xxx_3xxx.h"
+#include "prm2xxx.h"
 
 /* Bits shared between registers */
 
@@ -209,9 +209,13 @@
 
 /* RM_RSTST_WKUP specific bits */
 /* 2430 calls EXTWMPU_RST "EXTWARM_RST" and GLOBALWMPU_RST "GLOBALWARM_RST" */
+#define OMAP24XX_EXTWMPU_RST_SHIFT			6
 #define OMAP24XX_EXTWMPU_RST_MASK			(1 << 6)
+#define OMAP24XX_SECU_WD_RST_SHIFT			5
 #define OMAP24XX_SECU_WD_RST_MASK			(1 << 5)
+#define OMAP24XX_MPU_WD_RST_SHIFT			4
 #define OMAP24XX_MPU_WD_RST_MASK			(1 << 4)
+#define OMAP24XX_SECU_VIOL_RST_SHIFT			3
 #define OMAP24XX_SECU_VIOL_RST_MASK			(1 << 3)
 
 /* PM_WKEN_WKUP specific bits */

arch/arm/mach-omap2/prm-regbits-34xx.h

@@ -14,7 +14,7 @@
 #define __ARCH_ARM_MACH_OMAP2_PRM_REGBITS_34XX_H
 
 
-#include "prm2xxx_3xxx.h"
+#include "prm3xxx.h"
 
 /* Shared register bits */
 
@@ -509,15 +509,25 @@
 #define OMAP3430_RSTTIME1_MASK				(0xff << 0)
 
 /* PRM_RSTST */
+#define OMAP3430_ICECRUSHER_RST_SHIFT			10
 #define OMAP3430_ICECRUSHER_RST_MASK			(1 << 10)
+#define OMAP3430_ICEPICK_RST_SHIFT			9
 #define OMAP3430_ICEPICK_RST_MASK			(1 << 9)
+#define OMAP3430_VDD2_VOLTAGE_MANAGER_RST_SHIFT		8
 #define OMAP3430_VDD2_VOLTAGE_MANAGER_RST_MASK		(1 << 8)
+#define OMAP3430_VDD1_VOLTAGE_MANAGER_RST_SHIFT		7
 #define OMAP3430_VDD1_VOLTAGE_MANAGER_RST_MASK		(1 << 7)
+#define OMAP3430_EXTERNAL_WARM_RST_SHIFT		6
 #define OMAP3430_EXTERNAL_WARM_RST_MASK			(1 << 6)
+#define OMAP3430_SECURE_WD_RST_SHIFT			5
 #define OMAP3430_SECURE_WD_RST_MASK			(1 << 5)
+#define OMAP3430_MPU_WD_RST_SHIFT			4
 #define OMAP3430_MPU_WD_RST_MASK			(1 << 4)
+#define OMAP3430_SECURITY_VIOL_RST_SHIFT		3
 #define OMAP3430_SECURITY_VIOL_RST_MASK			(1 << 3)
+#define OMAP3430_GLOBAL_SW_RST_SHIFT			1
 #define OMAP3430_GLOBAL_SW_RST_MASK			(1 << 1)
+#define OMAP3430_GLOBAL_COLD_RST_SHIFT			0
 #define OMAP3430_GLOBAL_COLD_RST_MASK			(1 << 0)
 
 /* PRM_VOLTCTRL */

arch/arm/mach-omap2/prm.h

@@ -1,7 +1,7 @@
 /*
  * OMAP2/3/4 Power/Reset Management (PRM) bitfield definitions
  *
- * Copyright (C) 2007-2009 Texas Instruments, Inc.
+ * Copyright (C) 2007-2009, 2012 Texas Instruments, Inc.
  * Copyright (C) 2010 Nokia Corporation
  *
  * Paul Walmsley
@@ -15,6 +15,28 @@
 
 #include "prcm-common.h"
 
+# ifndef __ASSEMBLER__
+extern void __iomem *prm_base;
+extern void omap2_set_globals_prm(void __iomem *prm);
+# endif
+
+
+/*
+ * MAX_MODULE_SOFTRESET_WAIT: Maximum microseconds to wait for OMAP
+ * module to softreset
+ */
+#define MAX_MODULE_SOFTRESET_WAIT		10000
+
+/*
+ * MAX_MODULE_HARDRESET_WAIT: Maximum microseconds to wait for an OMAP
+ * submodule to exit hardreset
+ */
+#define MAX_MODULE_HARDRESET_WAIT		10000
+
+/*
+ * Register bitfields
+ */
+
 /*
  * 24XX: PM_PWSTST_CORE, PM_PWSTST_GFX, PM_PWSTST_MPU, PM_PWSTST_DSP
  *
@@ -52,5 +74,58 @@
 #define OMAP_POWERSTATE_SHIFT				0
 #define OMAP_POWERSTATE_MASK				(0x3 << 0)
 
+/*
+ * Standardized OMAP reset source bits
+ *
+ * To the extent these happen to match the hardware register bit
+ * shifts, it's purely coincidental.  Used by omap-wdt.c.
+ * OMAP_UNKNOWN_RST_SRC_ID_SHIFT is a special value, used whenever
+ * there are any bits remaining in the global PRM_RSTST register that
+ * haven't been identified, or when the PRM code for the current SoC
+ * doesn't know how to interpret the register.
+ */
+#define OMAP_GLOBAL_COLD_RST_SRC_ID_SHIFT			0
+#define OMAP_GLOBAL_WARM_RST_SRC_ID_SHIFT			1
+#define OMAP_SECU_VIOL_RST_SRC_ID_SHIFT				2
+#define OMAP_MPU_WD_RST_SRC_ID_SHIFT				3
+#define OMAP_SECU_WD_RST_SRC_ID_SHIFT				4
+#define OMAP_EXTWARM_RST_SRC_ID_SHIFT				5
+#define OMAP_VDD_MPU_VM_RST_SRC_ID_SHIFT			6
+#define OMAP_VDD_IVA_VM_RST_SRC_ID_SHIFT			7
+#define OMAP_VDD_CORE_VM_RST_SRC_ID_SHIFT			8
+#define OMAP_ICEPICK_RST_SRC_ID_SHIFT				9
+#define OMAP_ICECRUSHER_RST_SRC_ID_SHIFT			10
+#define OMAP_C2C_RST_SRC_ID_SHIFT				11
+#define OMAP_UNKNOWN_RST_SRC_ID_SHIFT				12
+
+#ifndef __ASSEMBLER__
+
+/**
+ * struct prm_reset_src_map - map register bitshifts to standard bitshifts
+ * @reg_shift: bitshift in the PRM reset source register
+ * @std_shift: bitshift equivalent in the standard reset source list
+ *
+ * The fields are signed because -1 is used as a terminator.
+ */
+struct prm_reset_src_map {
+	s8 reg_shift;
+	s8 std_shift;
+};
+
+/**
+ * struct prm_ll_data - fn ptrs to per-SoC PRM function implementations
+ * @read_reset_sources: ptr to the Soc PRM-specific get_reset_source impl
+ */
+struct prm_ll_data {
+	u32 (*read_reset_sources)(void);
+};
+
+extern int prm_register(struct prm_ll_data *pld);
+extern int prm_unregister(struct prm_ll_data *pld);
+
+extern u32 prm_read_reset_sources(void);
+
+#endif
+
 
 #endif

arch/arm/mach-omap2/prm2xxx.c

@@ -0,0 +1,139 @@
+/*
+ * OMAP2xxx PRM module functions
+ *
+ * Copyright (C) 2010-2012 Texas Instruments, Inc.
+ * Copyright (C) 2010 Nokia Corporation
+ * Benoît Cousson
+ * Paul Walmsley
+ * Rajendra Nayak <rnayak@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+
+#include "common.h"
+#include <plat/cpu.h>
+
+#include "vp.h"
+#include "powerdomain.h"
+#include "clockdomain.h"
+#include "prm2xxx.h"
+#include "cm2xxx_3xxx.h"
+#include "prm-regbits-24xx.h"
+
+/*
+ * omap2xxx_prm_reset_src_map - map from bits in the PRM_RSTST_WKUP
+ *   hardware register (which are specific to the OMAP2xxx SoCs) to
+ *   reset source ID bit shifts (which is an OMAP SoC-independent
+ *   enumeration)
+ */
+static struct prm_reset_src_map omap2xxx_prm_reset_src_map[] = {
+	{ OMAP_GLOBALCOLD_RST_SHIFT, OMAP_GLOBAL_COLD_RST_SRC_ID_SHIFT },
+	{ OMAP_GLOBALWARM_RST_SHIFT, OMAP_GLOBAL_WARM_RST_SRC_ID_SHIFT },
+	{ OMAP24XX_SECU_VIOL_RST_SHIFT, OMAP_SECU_VIOL_RST_SRC_ID_SHIFT },
+	{ OMAP24XX_MPU_WD_RST_SHIFT, OMAP_MPU_WD_RST_SRC_ID_SHIFT },
+	{ OMAP24XX_SECU_WD_RST_SHIFT, OMAP_SECU_WD_RST_SRC_ID_SHIFT },
+	{ OMAP24XX_EXTWMPU_RST_SHIFT, OMAP_EXTWARM_RST_SRC_ID_SHIFT },
+	{ -1, -1 },
+};
+
+/**
+ * omap2xxx_prm_read_reset_sources - return the last SoC reset source
+ *
+ * Return a u32 representing the last reset sources of the SoC.  The
+ * returned reset source bits are standardized across OMAP SoCs.
+ */
+static u32 omap2xxx_prm_read_reset_sources(void)
+{
+	struct prm_reset_src_map *p;
+	u32 r = 0;
+	u32 v;
+
+	v = omap2_prm_read_mod_reg(WKUP_MOD, OMAP2_RM_RSTST);
+
+	p = omap2xxx_prm_reset_src_map;
+	while (p->reg_shift >= 0 && p->std_shift >= 0) {
+		if (v & (1 << p->reg_shift))
+			r |= 1 << p->std_shift;
+		p++;
+	}
+
+	return r;
+}
+
+/**
+ * omap2xxx_prm_dpll_reset - use DPLL reset to reboot the OMAP SoC
+ *
+ * Set the DPLL reset bit, which should reboot the SoC.  This is the
+ * recommended way to restart the SoC.  No return value.
+ */
+void omap2xxx_prm_dpll_reset(void)
+{
+	omap2_prm_set_mod_reg_bits(OMAP_RST_DPLL3_MASK, WKUP_MOD,
+				   OMAP2_RM_RSTCTRL);
+	/* OCP barrier */
+	omap2_prm_read_mod_reg(WKUP_MOD, OMAP2_RM_RSTCTRL);
+}
+
+int omap2xxx_clkdm_sleep(struct clockdomain *clkdm)
+{
+	omap2_prm_set_mod_reg_bits(OMAP24XX_FORCESTATE_MASK,
+				   clkdm->pwrdm.ptr->prcm_offs,
+				   OMAP2_PM_PWSTCTRL);
+	return 0;
+}
+
+int omap2xxx_clkdm_wakeup(struct clockdomain *clkdm)
+{
+	omap2_prm_clear_mod_reg_bits(OMAP24XX_FORCESTATE_MASK,
+				     clkdm->pwrdm.ptr->prcm_offs,
+				     OMAP2_PM_PWSTCTRL);
+	return 0;
+}
+
+struct pwrdm_ops omap2_pwrdm_operations = {
+	.pwrdm_set_next_pwrst	= omap2_pwrdm_set_next_pwrst,
+	.pwrdm_read_next_pwrst	= omap2_pwrdm_read_next_pwrst,
+	.pwrdm_read_pwrst	= omap2_pwrdm_read_pwrst,
+	.pwrdm_set_logic_retst	= omap2_pwrdm_set_logic_retst,
+	.pwrdm_set_mem_onst	= omap2_pwrdm_set_mem_onst,
+	.pwrdm_set_mem_retst	= omap2_pwrdm_set_mem_retst,
+	.pwrdm_read_mem_pwrst	= omap2_pwrdm_read_mem_pwrst,
+	.pwrdm_read_mem_retst	= omap2_pwrdm_read_mem_retst,
+	.pwrdm_wait_transition	= omap2_pwrdm_wait_transition,
+};
+
+/*
+ *
+ */
+
+static struct prm_ll_data omap2xxx_prm_ll_data = {
+	.read_reset_sources = &omap2xxx_prm_read_reset_sources,
+};
+
+static int __init omap2xxx_prm_init(void)
+{
+	if (!cpu_is_omap24xx())
+		return 0;
+
+	return prm_register(&omap2xxx_prm_ll_data);
+}
+subsys_initcall(omap2xxx_prm_init);
+
+static void __exit omap2xxx_prm_exit(void)
+{
+	if (!cpu_is_omap24xx())
+		return;
+
+	/* Should never happen */
+	WARN(prm_unregister(&omap2xxx_prm_ll_data),
+	     "%s: prm_ll_data function pointer mismatch\n", __func__);
+}
+__exitcall(omap2xxx_prm_exit);

arch/arm/mach-omap2/prm2xxx.h

@@ -0,0 +1,134 @@
+/*
+ * OMAP2xxx Power/Reset Management (PRM) register definitions
+ *
+ * Copyright (C) 2007-2009, 2011-2012 Texas Instruments, Inc.
+ * Copyright (C) 2008-2010 Nokia Corporation
+ * Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * The PRM hardware modules on the OMAP2/3 are quite similar to each
+ * other.  The PRM on OMAP4 has a new register layout, and is handled
+ * in a separate file.
+ */
+#ifndef __ARCH_ARM_MACH_OMAP2_PRM2XXX_H
+#define __ARCH_ARM_MACH_OMAP2_PRM2XXX_H
+
+#include "prcm-common.h"
+#include "prm.h"
+#include "prm2xxx_3xxx.h"
+
+#define OMAP2420_PRM_REGADDR(module, reg)				\
+		OMAP2_L4_IO_ADDRESS(OMAP2420_PRM_BASE + (module) + (reg))
+#define OMAP2430_PRM_REGADDR(module, reg)				\
+		OMAP2_L4_IO_ADDRESS(OMAP2430_PRM_BASE + (module) + (reg))
+
+/*
+ * OMAP2-specific global PRM registers
+ * Use __raw_{read,write}l() with these registers.
+ *
+ * With a few exceptions, these are the register names beginning with
+ * PRCM_* on 24xx.  (The exceptions are the IRQSTATUS and IRQENABLE
+ * bits.)
+ *
+ */
+
+#define OMAP2_PRCM_REVISION_OFFSET	0x0000
+#define OMAP2420_PRCM_REVISION		OMAP2420_PRM_REGADDR(OCP_MOD, 0x0000)
+#define OMAP2_PRCM_SYSCONFIG_OFFSET	0x0010
+#define OMAP2420_PRCM_SYSCONFIG		OMAP2420_PRM_REGADDR(OCP_MOD, 0x0010)
+
+#define OMAP2_PRCM_IRQSTATUS_MPU_OFFSET	0x0018
+#define OMAP2420_PRCM_IRQSTATUS_MPU	OMAP2420_PRM_REGADDR(OCP_MOD, 0x0018)
+#define OMAP2_PRCM_IRQENABLE_MPU_OFFSET	0x001c
+#define OMAP2420_PRCM_IRQENABLE_MPU	OMAP2420_PRM_REGADDR(OCP_MOD, 0x001c)
+
+#define OMAP2_PRCM_VOLTCTRL_OFFSET	0x0050
+#define OMAP2420_PRCM_VOLTCTRL		OMAP2420_PRM_REGADDR(OCP_MOD, 0x0050)
+#define OMAP2_PRCM_VOLTST_OFFSET	0x0054
+#define OMAP2420_PRCM_VOLTST		OMAP2420_PRM_REGADDR(OCP_MOD, 0x0054)
+#define OMAP2_PRCM_CLKSRC_CTRL_OFFSET	0x0060
+#define OMAP2420_PRCM_CLKSRC_CTRL	OMAP2420_PRM_REGADDR(OCP_MOD, 0x0060)
+#define OMAP2_PRCM_CLKOUT_CTRL_OFFSET	0x0070
+#define OMAP2420_PRCM_CLKOUT_CTRL	OMAP2420_PRM_REGADDR(OCP_MOD, 0x0070)
+#define OMAP2_PRCM_CLKEMUL_CTRL_OFFSET	0x0078
+#define OMAP2420_PRCM_CLKEMUL_CTRL	OMAP2420_PRM_REGADDR(OCP_MOD, 0x0078)
+#define OMAP2_PRCM_CLKCFG_CTRL_OFFSET	0x0080
+#define OMAP2420_PRCM_CLKCFG_CTRL	OMAP2420_PRM_REGADDR(OCP_MOD, 0x0080)
+#define OMAP2_PRCM_CLKCFG_STATUS_OFFSET	0x0084
+#define OMAP2420_PRCM_CLKCFG_STATUS	OMAP2420_PRM_REGADDR(OCP_MOD, 0x0084)
+#define OMAP2_PRCM_VOLTSETUP_OFFSET	0x0090
+#define OMAP2420_PRCM_VOLTSETUP		OMAP2420_PRM_REGADDR(OCP_MOD, 0x0090)
+#define OMAP2_PRCM_CLKSSETUP_OFFSET	0x0094
+#define OMAP2420_PRCM_CLKSSETUP		OMAP2420_PRM_REGADDR(OCP_MOD, 0x0094)
+#define OMAP2_PRCM_POLCTRL_OFFSET	0x0098
+#define OMAP2420_PRCM_POLCTRL		OMAP2420_PRM_REGADDR(OCP_MOD, 0x0098)
+
+#define OMAP2430_PRCM_REVISION		OMAP2430_PRM_REGADDR(OCP_MOD, 0x0000)
+#define OMAP2430_PRCM_SYSCONFIG		OMAP2430_PRM_REGADDR(OCP_MOD, 0x0010)
+
+#define OMAP2430_PRCM_IRQSTATUS_MPU	OMAP2430_PRM_REGADDR(OCP_MOD, 0x0018)
+#define OMAP2430_PRCM_IRQENABLE_MPU	OMAP2430_PRM_REGADDR(OCP_MOD, 0x001c)
+
+#define OMAP2430_PRCM_VOLTCTRL		OMAP2430_PRM_REGADDR(OCP_MOD, 0x0050)
+#define OMAP2430_PRCM_VOLTST		OMAP2430_PRM_REGADDR(OCP_MOD, 0x0054)
+#define OMAP2430_PRCM_CLKSRC_CTRL	OMAP2430_PRM_REGADDR(OCP_MOD, 0x0060)
+#define OMAP2430_PRCM_CLKOUT_CTRL	OMAP2430_PRM_REGADDR(OCP_MOD, 0x0070)
+#define OMAP2430_PRCM_CLKEMUL_CTRL	OMAP2430_PRM_REGADDR(OCP_MOD, 0x0078)
+#define OMAP2430_PRCM_CLKCFG_CTRL	OMAP2430_PRM_REGADDR(OCP_MOD, 0x0080)
+#define OMAP2430_PRCM_CLKCFG_STATUS	OMAP2430_PRM_REGADDR(OCP_MOD, 0x0084)
+#define OMAP2430_PRCM_VOLTSETUP		OMAP2430_PRM_REGADDR(OCP_MOD, 0x0090)
+#define OMAP2430_PRCM_CLKSSETUP		OMAP2430_PRM_REGADDR(OCP_MOD, 0x0094)
+#define OMAP2430_PRCM_POLCTRL		OMAP2430_PRM_REGADDR(OCP_MOD, 0x0098)
+
+/*
+ * Module specific PRM register offsets from PRM_BASE + domain offset
+ *
+ * Use prm_{read,write}_mod_reg() with these registers.
+ *
+ * With a few exceptions, these are the register names beginning with
+ * {PM,RM}_* on both OMAP2/3 SoC families..  (The exceptions are the
+ * IRQSTATUS and IRQENABLE bits.)
+ */
+
+/* Register offsets appearing on both OMAP2 and OMAP3 */
+
+#define OMAP2_RM_RSTCTRL				0x0050
+#define OMAP2_RM_RSTTIME				0x0054
+#define OMAP2_RM_RSTST					0x0058
+#define OMAP2_PM_PWSTCTRL				0x00e0
+#define OMAP2_PM_PWSTST					0x00e4
+
+#define PM_WKEN						0x00a0
+#define PM_WKEN1					PM_WKEN
+#define PM_WKST						0x00b0
+#define PM_WKST1					PM_WKST
+#define PM_WKDEP					0x00c8
+#define PM_EVGENCTRL					0x00d4
+#define PM_EVGENONTIM					0x00d8
+#define PM_EVGENOFFTIM					0x00dc
+
+/* OMAP2xxx specific register offsets */
+#define OMAP24XX_PM_WKEN2				0x00a4
+#define OMAP24XX_PM_WKST2				0x00b4
+
+#define OMAP24XX_PRCM_IRQSTATUS_DSP			0x00f0	/* IVA mod */
+#define OMAP24XX_PRCM_IRQENABLE_DSP			0x00f4	/* IVA mod */
+#define OMAP24XX_PRCM_IRQSTATUS_IVA			0x00f8
+#define OMAP24XX_PRCM_IRQENABLE_IVA			0x00fc
+
+#ifndef __ASSEMBLER__
+/* Function prototypes */
+extern int omap2xxx_clkdm_sleep(struct clockdomain *clkdm);
+extern int omap2xxx_clkdm_wakeup(struct clockdomain *clkdm);
+
+extern void omap2xxx_prm_dpll_reset(void);
+
+extern int __init prm2xxx_init(void);
+extern int __exit prm2xxx_exit(void);
+
+#endif
+
+#endif

arch/arm/mach-omap2/prm2xxx_3xxx.c

@@ -15,82 +15,12 @@
 #include <linux/errno.h>
 #include <linux/err.h>
 #include <linux/io.h>
-#include <linux/irq.h>
 
-#include <plat/prcm.h>
-
-#include "soc.h"
 #include "common.h"
-#include "vp.h"
-
+#include "powerdomain.h"
 #include "prm2xxx_3xxx.h"
-#include "cm2xxx_3xxx.h"
 #include "prm-regbits-24xx.h"
-#include "prm-regbits-34xx.h"
-
-static const struct omap_prcm_irq omap3_prcm_irqs[] = {
-	OMAP_PRCM_IRQ("wkup",	0,	0),
-	OMAP_PRCM_IRQ("io",	9,	1),
-};
-
-static struct omap_prcm_irq_setup omap3_prcm_irq_setup = {
-	.ack			= OMAP3_PRM_IRQSTATUS_MPU_OFFSET,
-	.mask			= OMAP3_PRM_IRQENABLE_MPU_OFFSET,
-	.nr_regs		= 1,
-	.irqs			= omap3_prcm_irqs,
-	.nr_irqs		= ARRAY_SIZE(omap3_prcm_irqs),
-	.irq			= 11 + OMAP_INTC_START,
-	.read_pending_irqs	= &omap3xxx_prm_read_pending_irqs,
-	.ocp_barrier		= &omap3xxx_prm_ocp_barrier,
-	.save_and_clear_irqen	= &omap3xxx_prm_save_and_clear_irqen,
-	.restore_irqen		= &omap3xxx_prm_restore_irqen,
-};
-
-u32 omap2_prm_read_mod_reg(s16 module, u16 idx)
-{
-	return __raw_readl(prm_base + module + idx);
-}
-
-void omap2_prm_write_mod_reg(u32 val, s16 module, u16 idx)
-{
-	__raw_writel(val, prm_base + module + idx);
-}
-
-/* Read-modify-write a register in a PRM module. Caller must lock */
-u32 omap2_prm_rmw_mod_reg_bits(u32 mask, u32 bits, s16 module, s16 idx)
-{
-	u32 v;
-
-	v = omap2_prm_read_mod_reg(module, idx);
-	v &= ~mask;
-	v |= bits;
-	omap2_prm_write_mod_reg(v, module, idx);
-
-	return v;
-}
-
-/* Read a PRM register, AND it, and shift the result down to bit 0 */
-u32 omap2_prm_read_mod_bits_shift(s16 domain, s16 idx, u32 mask)
-{
-	u32 v;
-
-	v = omap2_prm_read_mod_reg(domain, idx);
-	v &= mask;
-	v >>= __ffs(mask);
-
-	return v;
-}
-
-u32 omap2_prm_set_mod_reg_bits(u32 bits, s16 module, s16 idx)
-{
-	return omap2_prm_rmw_mod_reg_bits(bits, bits, module, idx);
-}
-
-u32 omap2_prm_clear_mod_reg_bits(u32 bits, s16 module, s16 idx)
-{
-	return omap2_prm_rmw_mod_reg_bits(bits, 0x0, module, idx);
-}
-
+#include "clockdomain.h"
 
 /**
  * omap2_prm_is_hardreset_asserted - read the HW reset line state of
@@ -104,9 +34,6 @@ u32 omap2_prm_clear_mod_reg_bits(u32 bits, s16 module, s16 idx)
  */
 int omap2_prm_is_hardreset_asserted(s16 prm_mod, u8 shift)
 {
-	if (!(cpu_is_omap24xx() || cpu_is_omap34xx()))
-		return -EINVAL;
-
 	return omap2_prm_read_mod_bits_shift(prm_mod, OMAP2_RM_RSTCTRL,
 				       (1 << shift));
 }
@@ -127,9 +54,6 @@ int omap2_prm_assert_hardreset(s16 prm_mod, u8 shift)
 {
 	u32 mask;
 
-	if (!(cpu_is_omap24xx() || cpu_is_omap34xx()))
-		return -EINVAL;
-
 	mask = 1 << shift;
 	omap2_prm_rmw_mod_reg_bits(mask, mask, prm_mod, OMAP2_RM_RSTCTRL);
 
@@ -156,9 +80,6 @@ int omap2_prm_deassert_hardreset(s16 prm_mod, u8 rst_shift, u8 st_shift)
 	u32 rst, st;
 	int c;
 
-	if (!(cpu_is_omap24xx() || cpu_is_omap34xx()))
-		return -EINVAL;
-
 	rst = 1 << rst_shift;
 	st = 1 << st_shift;
 
@@ -178,188 +99,155 @@ int omap2_prm_deassert_hardreset(s16 prm_mod, u8 rst_shift, u8 st_shift)
 	return (c == MAX_MODULE_HARDRESET_WAIT) ? -EBUSY : 0;
 }
 
-/* PRM VP */
 
-/*
- * struct omap3_vp - OMAP3 VP register access description.
- * @tranxdone_status: VP_TRANXDONE_ST bitmask in PRM_IRQSTATUS_MPU reg
- */
-struct omap3_vp {
-	u32 tranxdone_status;
-};
+/* Powerdomain low-level functions */
 
-static struct omap3_vp omap3_vp[] = {
-	[OMAP3_VP_VDD_MPU_ID] = {
-		.tranxdone_status = OMAP3430_VP1_TRANXDONE_ST_MASK,
-	},
-	[OMAP3_VP_VDD_CORE_ID] = {
-		.tranxdone_status = OMAP3430_VP2_TRANXDONE_ST_MASK,
-	},
-};
-
-#define MAX_VP_ID ARRAY_SIZE(omap3_vp);
-
-u32 omap3_prm_vp_check_txdone(u8 vp_id)
+/* Common functions across OMAP2 and OMAP3 */
+int omap2_pwrdm_set_next_pwrst(struct powerdomain *pwrdm, u8 pwrst)
 {
-	struct omap3_vp *vp = &omap3_vp[vp_id];
-	u32 irqstatus;
-
-	irqstatus = omap2_prm_read_mod_reg(OCP_MOD,
-					   OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
-	return irqstatus & vp->tranxdone_status;
+	omap2_prm_rmw_mod_reg_bits(OMAP_POWERSTATE_MASK,
+				   (pwrst << OMAP_POWERSTATE_SHIFT),
+				   pwrdm->prcm_offs, OMAP2_PM_PWSTCTRL);
+	return 0;
 }
 
-void omap3_prm_vp_clear_txdone(u8 vp_id)
+int omap2_pwrdm_read_next_pwrst(struct powerdomain *pwrdm)
 {
-	struct omap3_vp *vp = &omap3_vp[vp_id];
-
-	omap2_prm_write_mod_reg(vp->tranxdone_status,
-				OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
+	return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs,
+					     OMAP2_PM_PWSTCTRL,
+					     OMAP_POWERSTATE_MASK);
 }
 
-u32 omap3_prm_vcvp_read(u8 offset)
+int omap2_pwrdm_read_pwrst(struct powerdomain *pwrdm)
 {
-	return omap2_prm_read_mod_reg(OMAP3430_GR_MOD, offset);
+	return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs,
+					     OMAP2_PM_PWSTST,
+					     OMAP_POWERSTATEST_MASK);
 }
 
-void omap3_prm_vcvp_write(u32 val, u8 offset)
+int omap2_pwrdm_set_mem_onst(struct powerdomain *pwrdm, u8 bank,
+								u8 pwrst)
 {
-	omap2_prm_write_mod_reg(val, OMAP3430_GR_MOD, offset);
+	u32 m;
+
+	m = omap2_pwrdm_get_mem_bank_onstate_mask(bank);
+
+	omap2_prm_rmw_mod_reg_bits(m, (pwrst << __ffs(m)), pwrdm->prcm_offs,
+				   OMAP2_PM_PWSTCTRL);
+
+	return 0;
 }
 
-u32 omap3_prm_vcvp_rmw(u32 mask, u32 bits, u8 offset)
+int omap2_pwrdm_set_mem_retst(struct powerdomain *pwrdm, u8 bank,
+								u8 pwrst)
 {
-	return omap2_prm_rmw_mod_reg_bits(mask, bits, OMAP3430_GR_MOD, offset);
+	u32 m;
+
+	m = omap2_pwrdm_get_mem_bank_retst_mask(bank);
+
+	omap2_prm_rmw_mod_reg_bits(m, (pwrst << __ffs(m)), pwrdm->prcm_offs,
+				   OMAP2_PM_PWSTCTRL);
+
+	return 0;
 }
 
-/**
- * omap3xxx_prm_read_pending_irqs - read pending PRM MPU IRQs into @events
- * @events: ptr to a u32, preallocated by caller
- *
- * Read PRM_IRQSTATUS_MPU bits, AND'ed with the currently-enabled PRM
- * MPU IRQs, and store the result into the u32 pointed to by @events.
- * No return value.
- */
-void omap3xxx_prm_read_pending_irqs(unsigned long *events)
+int omap2_pwrdm_read_mem_pwrst(struct powerdomain *pwrdm, u8 bank)
 {
-	u32 mask, st;
+	u32 m;
 
-	/* XXX Can the mask read be avoided (e.g., can it come from RAM?) */
-	mask = omap2_prm_read_mod_reg(OCP_MOD, OMAP3_PRM_IRQENABLE_MPU_OFFSET);
-	st = omap2_prm_read_mod_reg(OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
+	m = omap2_pwrdm_get_mem_bank_stst_mask(bank);
 
-	events[0] = mask & st;
+	return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs, OMAP2_PM_PWSTST,
+					     m);
 }
 
-/**
- * omap3xxx_prm_ocp_barrier - force buffered MPU writes to the PRM to complete
- *
- * Force any buffered writes to the PRM IP block to complete.  Needed
- * by the PRM IRQ handler, which reads and writes directly to the IP
- * block, to avoid race conditions after acknowledging or clearing IRQ
- * bits.  No return value.
- */
-void omap3xxx_prm_ocp_barrier(void)
+int omap2_pwrdm_read_mem_retst(struct powerdomain *pwrdm, u8 bank)
 {
-	omap2_prm_read_mod_reg(OCP_MOD, OMAP3_PRM_REVISION_OFFSET);
+	u32 m;
+
+	m = omap2_pwrdm_get_mem_bank_retst_mask(bank);
+
+	return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs,
+					     OMAP2_PM_PWSTCTRL, m);
 }
 
-/**
- * omap3xxx_prm_save_and_clear_irqen - save/clear PRM_IRQENABLE_MPU reg
- * @saved_mask: ptr to a u32 array to save IRQENABLE bits
- *
- * Save the PRM_IRQENABLE_MPU register to @saved_mask.  @saved_mask
- * must be allocated by the caller.  Intended to be used in the PRM
- * interrupt handler suspend callback.  The OCP barrier is needed to
- * ensure the write to disable PRM interrupts reaches the PRM before
- * returning; otherwise, spurious interrupts might occur.  No return
- * value.
- */
-void omap3xxx_prm_save_and_clear_irqen(u32 *saved_mask)
+int omap2_pwrdm_set_logic_retst(struct powerdomain *pwrdm, u8 pwrst)
 {
-	saved_mask[0] = omap2_prm_read_mod_reg(OCP_MOD,
-					       OMAP3_PRM_IRQENABLE_MPU_OFFSET);
-	omap2_prm_write_mod_reg(0, OCP_MOD, OMAP3_PRM_IRQENABLE_MPU_OFFSET);
+	u32 v;
 
-	/* OCP barrier */
-	omap2_prm_read_mod_reg(OCP_MOD, OMAP3_PRM_REVISION_OFFSET);
+	v = pwrst << __ffs(OMAP_LOGICRETSTATE_MASK);
+	omap2_prm_rmw_mod_reg_bits(OMAP_LOGICRETSTATE_MASK, v, pwrdm->prcm_offs,
+				   OMAP2_PM_PWSTCTRL);
+
+	return 0;
 }
 
-/**
- * omap3xxx_prm_restore_irqen - set PRM_IRQENABLE_MPU register from args
- * @saved_mask: ptr to a u32 array of IRQENABLE bits saved previously
- *
- * Restore the PRM_IRQENABLE_MPU register from @saved_mask.  Intended
- * to be used in the PRM interrupt handler resume callback to restore
- * values saved by omap3xxx_prm_save_and_clear_irqen().  No OCP
- * barrier should be needed here; any pending PRM interrupts will fire
- * once the writes reach the PRM.  No return value.
- */
-void omap3xxx_prm_restore_irqen(u32 *saved_mask)
+int omap2_pwrdm_wait_transition(struct powerdomain *pwrdm)
 {
-	omap2_prm_write_mod_reg(saved_mask[0], OCP_MOD,
-				OMAP3_PRM_IRQENABLE_MPU_OFFSET);
-}
+	u32 c = 0;
 
-/**
- * omap3xxx_prm_reconfigure_io_chain - clear latches and reconfigure I/O chain
- *
- * Clear any previously-latched I/O wakeup events and ensure that the
- * I/O wakeup gates are aligned with the current mux settings.  Works
- * by asserting WUCLKIN, waiting for WUCLKOUT to be asserted, and then
- * deasserting WUCLKIN and clearing the ST_IO_CHAIN WKST bit.  No
- * return value.
- */
-void omap3xxx_prm_reconfigure_io_chain(void)
-{
-	int i = 0;
+	/*
+	 * REVISIT: pwrdm_wait_transition() may be better implemented
+	 * via a callback and a periodic timer check -- how long do we expect
+	 * powerdomain transitions to take?
+	 */
 
-	omap2_prm_set_mod_reg_bits(OMAP3430_EN_IO_CHAIN_MASK, WKUP_MOD,
-				   PM_WKEN);
+	/* XXX Is this udelay() value meaningful? */
+	while ((omap2_prm_read_mod_reg(pwrdm->prcm_offs, OMAP2_PM_PWSTST) &
+		OMAP_INTRANSITION_MASK) &&
+		(c++ < PWRDM_TRANSITION_BAILOUT))
+			udelay(1);
 
-	omap_test_timeout(omap2_prm_read_mod_reg(WKUP_MOD, PM_WKST) &
-			  OMAP3430_ST_IO_CHAIN_MASK,
-			  MAX_IOPAD_LATCH_TIME, i);
-	if (i == MAX_IOPAD_LATCH_TIME)
-		pr_warn("PRM: I/O chain clock line assertion timed out\n");
-
-	omap2_prm_clear_mod_reg_bits(OMAP3430_EN_IO_CHAIN_MASK, WKUP_MOD,
-				     PM_WKEN);
-
-	omap2_prm_set_mod_reg_bits(OMAP3430_ST_IO_CHAIN_MASK, WKUP_MOD,
-				   PM_WKST);
-
-	omap2_prm_read_mod_reg(WKUP_MOD, PM_WKST);
-}
-
-/**
- * omap3xxx_prm_enable_io_wakeup - enable wakeup events from I/O wakeup latches
- *
- * Activates the I/O wakeup event latches and allows events logged by
- * those latches to signal a wakeup event to the PRCM.  For I/O
- * wakeups to occur, WAKEUPENABLE bits must be set in the pad mux
- * registers, and omap3xxx_prm_reconfigure_io_chain() must be called.
- * No return value.
- */
-static void __init omap3xxx_prm_enable_io_wakeup(void)
-{
-	if (omap3_has_io_wakeup())
-		omap2_prm_set_mod_reg_bits(OMAP3430_EN_IO_MASK, WKUP_MOD,
-					   PM_WKEN);
-}
-
-static int __init omap3xxx_prcm_init(void)
-{
-	int ret = 0;
-
-	if (cpu_is_omap34xx()) {
-		omap3xxx_prm_enable_io_wakeup();
-		ret = omap_prcm_register_chain_handler(&omap3_prcm_irq_setup);
-		if (!ret)
-			irq_set_status_flags(omap_prcm_event_to_irq("io"),
-					     IRQ_NOAUTOEN);
+	if (c > PWRDM_TRANSITION_BAILOUT) {
+		pr_err("powerdomain: %s: waited too long to complete transition\n",
+		       pwrdm->name);
+		return -EAGAIN;
 	}
 
-	return ret;
+	pr_debug("powerdomain: completed transition in %d loops\n", c);
+
+	return 0;
 }
-subsys_initcall(omap3xxx_prcm_init);
+
+int omap2_clkdm_add_wkdep(struct clockdomain *clkdm1,
+			  struct clockdomain *clkdm2)
+{
+	omap2_prm_set_mod_reg_bits((1 << clkdm2->dep_bit),
+				   clkdm1->pwrdm.ptr->prcm_offs, PM_WKDEP);
+	return 0;
+}
+
+int omap2_clkdm_del_wkdep(struct clockdomain *clkdm1,
+			  struct clockdomain *clkdm2)
+{
+	omap2_prm_clear_mod_reg_bits((1 << clkdm2->dep_bit),
+				     clkdm1->pwrdm.ptr->prcm_offs, PM_WKDEP);
+	return 0;
+}
+
+int omap2_clkdm_read_wkdep(struct clockdomain *clkdm1,
+			   struct clockdomain *clkdm2)
+{
+	return omap2_prm_read_mod_bits_shift(clkdm1->pwrdm.ptr->prcm_offs,
+					     PM_WKDEP, (1 << clkdm2->dep_bit));
+}
+
+int omap2_clkdm_clear_all_wkdeps(struct clockdomain *clkdm)
+{
+	struct clkdm_dep *cd;
+	u32 mask = 0;
+
+	for (cd = clkdm->wkdep_srcs; cd && cd->clkdm_name; cd++) {
+		if (!cd->clkdm)
+			continue; /* only happens if data is erroneous */
+
+		/* PRM accesses are slow, so minimize them */
+		mask |= 1 << cd->clkdm->dep_bit;
+		atomic_set(&cd->wkdep_usecount, 0);
+	}
+
+	omap2_prm_clear_mod_reg_bits(mask, clkdm->pwrdm.ptr->prcm_offs,
+				     PM_WKDEP);
+	return 0;
+}
+

arch/arm/mach-omap2/prm2xxx_3xxx.h

@@ -1,7 +1,7 @@
 /*
- * OMAP2/3 Power/Reset Management (PRM) register definitions
+ * OMAP2xxx/3xxx-common Power/Reset Management (PRM) register definitions
  *
- * Copyright (C) 2007-2009, 2011 Texas Instruments, Inc.
+ * Copyright (C) 2007-2009, 2011-2012 Texas Instruments, Inc.
  * Copyright (C) 2008-2010 Nokia Corporation
  * Paul Walmsley
  *
@@ -19,160 +19,6 @@
 #include "prcm-common.h"
 #include "prm.h"
 
-#define OMAP2420_PRM_REGADDR(module, reg)				\
-		OMAP2_L4_IO_ADDRESS(OMAP2420_PRM_BASE + (module) + (reg))
-#define OMAP2430_PRM_REGADDR(module, reg)				\
-		OMAP2_L4_IO_ADDRESS(OMAP2430_PRM_BASE + (module) + (reg))
-#define OMAP34XX_PRM_REGADDR(module, reg)				\
-		OMAP2_L4_IO_ADDRESS(OMAP3430_PRM_BASE + (module) + (reg))
-
-
-/*
- * OMAP2-specific global PRM registers
- * Use __raw_{read,write}l() with these registers.
- *
- * With a few exceptions, these are the register names beginning with
- * PRCM_* on 24xx.  (The exceptions are the IRQSTATUS and IRQENABLE
- * bits.)
- *
- */
-
-#define OMAP2_PRCM_REVISION_OFFSET	0x0000
-#define OMAP2420_PRCM_REVISION		OMAP2420_PRM_REGADDR(OCP_MOD, 0x0000)
-#define OMAP2_PRCM_SYSCONFIG_OFFSET	0x0010
-#define OMAP2420_PRCM_SYSCONFIG		OMAP2420_PRM_REGADDR(OCP_MOD, 0x0010)
-
-#define OMAP2_PRCM_IRQSTATUS_MPU_OFFSET	0x0018
-#define OMAP2420_PRCM_IRQSTATUS_MPU	OMAP2420_PRM_REGADDR(OCP_MOD, 0x0018)
-#define OMAP2_PRCM_IRQENABLE_MPU_OFFSET	0x001c
-#define OMAP2420_PRCM_IRQENABLE_MPU	OMAP2420_PRM_REGADDR(OCP_MOD, 0x001c)
-
-#define OMAP2_PRCM_VOLTCTRL_OFFSET	0x0050
-#define OMAP2420_PRCM_VOLTCTRL		OMAP2420_PRM_REGADDR(OCP_MOD, 0x0050)
-#define OMAP2_PRCM_VOLTST_OFFSET	0x0054
-#define OMAP2420_PRCM_VOLTST		OMAP2420_PRM_REGADDR(OCP_MOD, 0x0054)
-#define OMAP2_PRCM_CLKSRC_CTRL_OFFSET	0x0060
-#define OMAP2420_PRCM_CLKSRC_CTRL	OMAP2420_PRM_REGADDR(OCP_MOD, 0x0060)
-#define OMAP2_PRCM_CLKOUT_CTRL_OFFSET	0x0070
-#define OMAP2420_PRCM_CLKOUT_CTRL	OMAP2420_PRM_REGADDR(OCP_MOD, 0x0070)
-#define OMAP2_PRCM_CLKEMUL_CTRL_OFFSET	0x0078
-#define OMAP2420_PRCM_CLKEMUL_CTRL	OMAP2420_PRM_REGADDR(OCP_MOD, 0x0078)
-#define OMAP2_PRCM_CLKCFG_CTRL_OFFSET	0x0080
-#define OMAP2420_PRCM_CLKCFG_CTRL	OMAP2420_PRM_REGADDR(OCP_MOD, 0x0080)
-#define OMAP2_PRCM_CLKCFG_STATUS_OFFSET	0x0084
-#define OMAP2420_PRCM_CLKCFG_STATUS	OMAP2420_PRM_REGADDR(OCP_MOD, 0x0084)
-#define OMAP2_PRCM_VOLTSETUP_OFFSET	0x0090
-#define OMAP2420_PRCM_VOLTSETUP		OMAP2420_PRM_REGADDR(OCP_MOD, 0x0090)
-#define OMAP2_PRCM_CLKSSETUP_OFFSET	0x0094
-#define OMAP2420_PRCM_CLKSSETUP		OMAP2420_PRM_REGADDR(OCP_MOD, 0x0094)
-#define OMAP2_PRCM_POLCTRL_OFFSET	0x0098
-#define OMAP2420_PRCM_POLCTRL		OMAP2420_PRM_REGADDR(OCP_MOD, 0x0098)
-
-#define OMAP2430_PRCM_REVISION		OMAP2430_PRM_REGADDR(OCP_MOD, 0x0000)
-#define OMAP2430_PRCM_SYSCONFIG		OMAP2430_PRM_REGADDR(OCP_MOD, 0x0010)
-
-#define OMAP2430_PRCM_IRQSTATUS_MPU	OMAP2430_PRM_REGADDR(OCP_MOD, 0x0018)
-#define OMAP2430_PRCM_IRQENABLE_MPU	OMAP2430_PRM_REGADDR(OCP_MOD, 0x001c)
-
-#define OMAP2430_PRCM_VOLTCTRL		OMAP2430_PRM_REGADDR(OCP_MOD, 0x0050)
-#define OMAP2430_PRCM_VOLTST		OMAP2430_PRM_REGADDR(OCP_MOD, 0x0054)
-#define OMAP2430_PRCM_CLKSRC_CTRL	OMAP2430_PRM_REGADDR(OCP_MOD, 0x0060)
-#define OMAP2430_PRCM_CLKOUT_CTRL	OMAP2430_PRM_REGADDR(OCP_MOD, 0x0070)
-#define OMAP2430_PRCM_CLKEMUL_CTRL	OMAP2430_PRM_REGADDR(OCP_MOD, 0x0078)
-#define OMAP2430_PRCM_CLKCFG_CTRL	OMAP2430_PRM_REGADDR(OCP_MOD, 0x0080)
-#define OMAP2430_PRCM_CLKCFG_STATUS	OMAP2430_PRM_REGADDR(OCP_MOD, 0x0084)
-#define OMAP2430_PRCM_VOLTSETUP		OMAP2430_PRM_REGADDR(OCP_MOD, 0x0090)
-#define OMAP2430_PRCM_CLKSSETUP		OMAP2430_PRM_REGADDR(OCP_MOD, 0x0094)
-#define OMAP2430_PRCM_POLCTRL		OMAP2430_PRM_REGADDR(OCP_MOD, 0x0098)
-
-/*
- * OMAP3-specific global PRM registers
- * Use __raw_{read,write}l() with these registers.
- *
- * With a few exceptions, these are the register names beginning with
- * PRM_* on 34xx.  (The exceptions are the IRQSTATUS and IRQENABLE
- * bits.)
- */
-
-#define OMAP3_PRM_REVISION_OFFSET	0x0004
-#define OMAP3430_PRM_REVISION		OMAP34XX_PRM_REGADDR(OCP_MOD, 0x0004)
-#define OMAP3_PRM_SYSCONFIG_OFFSET	0x0014
-#define OMAP3430_PRM_SYSCONFIG		OMAP34XX_PRM_REGADDR(OCP_MOD, 0x0014)
-
-#define OMAP3_PRM_IRQSTATUS_MPU_OFFSET	0x0018
-#define OMAP3430_PRM_IRQSTATUS_MPU	OMAP34XX_PRM_REGADDR(OCP_MOD, 0x0018)
-#define OMAP3_PRM_IRQENABLE_MPU_OFFSET	0x001c
-#define OMAP3430_PRM_IRQENABLE_MPU	OMAP34XX_PRM_REGADDR(OCP_MOD, 0x001c)
-
-
-#define OMAP3_PRM_VC_SMPS_SA_OFFSET	0x0020
-#define OMAP3430_PRM_VC_SMPS_SA		OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0020)
-#define OMAP3_PRM_VC_SMPS_VOL_RA_OFFSET	0x0024
-#define OMAP3430_PRM_VC_SMPS_VOL_RA	OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0024)
-#define OMAP3_PRM_VC_SMPS_CMD_RA_OFFSET	0x0028
-#define OMAP3430_PRM_VC_SMPS_CMD_RA	OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0028)
-#define OMAP3_PRM_VC_CMD_VAL_0_OFFSET	0x002c
-#define OMAP3430_PRM_VC_CMD_VAL_0	OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x002c)
-#define OMAP3_PRM_VC_CMD_VAL_1_OFFSET	0x0030
-#define OMAP3430_PRM_VC_CMD_VAL_1	OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0030)
-#define OMAP3_PRM_VC_CH_CONF_OFFSET	0x0034
-#define OMAP3430_PRM_VC_CH_CONF		OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0034)
-#define OMAP3_PRM_VC_I2C_CFG_OFFSET	0x0038
-#define OMAP3430_PRM_VC_I2C_CFG		OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0038)
-#define OMAP3_PRM_VC_BYPASS_VAL_OFFSET	0x003c
-#define OMAP3430_PRM_VC_BYPASS_VAL	OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x003c)
-#define OMAP3_PRM_RSTCTRL_OFFSET	0x0050
-#define OMAP3430_PRM_RSTCTRL		OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0050)
-#define OMAP3_PRM_RSTTIME_OFFSET	0x0054
-#define OMAP3430_PRM_RSTTIME		OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0054)
-#define OMAP3_PRM_RSTST_OFFSET	0x0058
-#define OMAP3430_PRM_RSTST		OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0058)
-#define OMAP3_PRM_VOLTCTRL_OFFSET	0x0060
-#define OMAP3430_PRM_VOLTCTRL		OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0060)
-#define OMAP3_PRM_SRAM_PCHARGE_OFFSET	0x0064
-#define OMAP3430_PRM_SRAM_PCHARGE	OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0064)
-#define OMAP3_PRM_CLKSRC_CTRL_OFFSET	0x0070
-#define OMAP3430_PRM_CLKSRC_CTRL	OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0070)
-#define OMAP3_PRM_VOLTSETUP1_OFFSET	0x0090
-#define OMAP3430_PRM_VOLTSETUP1		OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0090)
-#define OMAP3_PRM_VOLTOFFSET_OFFSET	0x0094
-#define OMAP3430_PRM_VOLTOFFSET		OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0094)
-#define OMAP3_PRM_CLKSETUP_OFFSET	0x0098
-#define OMAP3430_PRM_CLKSETUP		OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0098)
-#define OMAP3_PRM_POLCTRL_OFFSET	0x009c
-#define OMAP3430_PRM_POLCTRL		OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x009c)
-#define OMAP3_PRM_VOLTSETUP2_OFFSET	0x00a0
-#define OMAP3430_PRM_VOLTSETUP2		OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00a0)
-#define OMAP3_PRM_VP1_CONFIG_OFFSET	0x00b0
-#define OMAP3430_PRM_VP1_CONFIG		OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00b0)
-#define OMAP3_PRM_VP1_VSTEPMIN_OFFSET	0x00b4
-#define OMAP3430_PRM_VP1_VSTEPMIN	OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00b4)
-#define OMAP3_PRM_VP1_VSTEPMAX_OFFSET	0x00b8
-#define OMAP3430_PRM_VP1_VSTEPMAX	OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00b8)
-#define OMAP3_PRM_VP1_VLIMITTO_OFFSET	0x00bc
-#define OMAP3430_PRM_VP1_VLIMITTO	OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00bc)
-#define OMAP3_PRM_VP1_VOLTAGE_OFFSET	0x00c0
-#define OMAP3430_PRM_VP1_VOLTAGE	OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00c0)
-#define OMAP3_PRM_VP1_STATUS_OFFSET	0x00c4
-#define OMAP3430_PRM_VP1_STATUS		OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00c4)
-#define OMAP3_PRM_VP2_CONFIG_OFFSET	0x00d0
-#define OMAP3430_PRM_VP2_CONFIG		OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00d0)
-#define OMAP3_PRM_VP2_VSTEPMIN_OFFSET	0x00d4
-#define OMAP3430_PRM_VP2_VSTEPMIN	OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00d4)
-#define OMAP3_PRM_VP2_VSTEPMAX_OFFSET	0x00d8
-#define OMAP3430_PRM_VP2_VSTEPMAX	OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00d8)
-#define OMAP3_PRM_VP2_VLIMITTO_OFFSET	0x00dc
-#define OMAP3430_PRM_VP2_VLIMITTO	OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00dc)
-#define OMAP3_PRM_VP2_VOLTAGE_OFFSET	0x00e0
-#define OMAP3430_PRM_VP2_VOLTAGE	OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00e0)
-#define OMAP3_PRM_VP2_STATUS_OFFSET	0x00e4
-#define OMAP3430_PRM_VP2_STATUS		OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00e4)
-
-#define OMAP3_PRM_CLKSEL_OFFSET	0x0040
-#define OMAP3430_PRM_CLKSEL		OMAP34XX_PRM_REGADDR(OMAP3430_CCR_MOD, 0x0040)
-#define OMAP3_PRM_CLKOUT_CTRL_OFFSET	0x0070
-#define OMAP3430_PRM_CLKOUT_CTRL	OMAP34XX_PRM_REGADDR(OMAP3430_CCR_MOD, 0x0070)
-
 /*
  * Module specific PRM register offsets from PRM_BASE + domain offset
  *
@@ -200,66 +46,83 @@
 #define PM_EVGENONTIM					0x00d8
 #define PM_EVGENOFFTIM					0x00dc
 
-/* OMAP2xxx specific register offsets */
-#define OMAP24XX_PM_WKEN2				0x00a4
-#define OMAP24XX_PM_WKST2				0x00b4
-
-#define OMAP24XX_PRCM_IRQSTATUS_DSP			0x00f0	/* IVA mod */
-#define OMAP24XX_PRCM_IRQENABLE_DSP			0x00f4	/* IVA mod */
-#define OMAP24XX_PRCM_IRQSTATUS_IVA			0x00f8
-#define OMAP24XX_PRCM_IRQENABLE_IVA			0x00fc
-
-/* OMAP3 specific register offsets */
-#define OMAP3430ES2_PM_WKEN3				0x00f0
-#define OMAP3430ES2_PM_WKST3				0x00b8
-
-#define OMAP3430_PM_MPUGRPSEL				0x00a4
-#define OMAP3430_PM_MPUGRPSEL1				OMAP3430_PM_MPUGRPSEL
-#define OMAP3430ES2_PM_MPUGRPSEL3			0x00f8
-
-#define OMAP3430_PM_IVAGRPSEL				0x00a8
-#define OMAP3430_PM_IVAGRPSEL1				OMAP3430_PM_IVAGRPSEL
-#define OMAP3430ES2_PM_IVAGRPSEL3			0x00f4
-
-#define OMAP3430_PM_PREPWSTST				0x00e8
-
-#define OMAP3430_PRM_IRQSTATUS_IVA2			0x00f8
-#define OMAP3430_PRM_IRQENABLE_IVA2			0x00fc
-
 
 #ifndef __ASSEMBLER__
+
+#include <linux/io.h>
+#include "powerdomain.h"
+
 /* Power/reset management domain register get/set */
-extern u32 omap2_prm_read_mod_reg(s16 module, u16 idx);
-extern void omap2_prm_write_mod_reg(u32 val, s16 module, u16 idx);
-extern u32 omap2_prm_rmw_mod_reg_bits(u32 mask, u32 bits, s16 module, s16 idx);
-extern u32 omap2_prm_set_mod_reg_bits(u32 bits, s16 module, s16 idx);
-extern u32 omap2_prm_clear_mod_reg_bits(u32 bits, s16 module, s16 idx);
-extern u32 omap2_prm_read_mod_bits_shift(s16 domain, s16 idx, u32 mask);
+static inline u32 omap2_prm_read_mod_reg(s16 module, u16 idx)
+{
+	return __raw_readl(prm_base + module + idx);
+}
+
+static inline void omap2_prm_write_mod_reg(u32 val, s16 module, u16 idx)
+{
+	__raw_writel(val, prm_base + module + idx);
+}
+
+/* Read-modify-write a register in a PRM module. Caller must lock */
+static inline u32 omap2_prm_rmw_mod_reg_bits(u32 mask, u32 bits, s16 module,
+					     s16 idx)
+{
+	u32 v;
+
+	v = omap2_prm_read_mod_reg(module, idx);
+	v &= ~mask;
+	v |= bits;
+	omap2_prm_write_mod_reg(v, module, idx);
+
+	return v;
+}
+
+/* Read a PRM register, AND it, and shift the result down to bit 0 */
+static inline u32 omap2_prm_read_mod_bits_shift(s16 domain, s16 idx, u32 mask)
+{
+	u32 v;
+
+	v = omap2_prm_read_mod_reg(domain, idx);
+	v &= mask;
+	v >>= __ffs(mask);
+
+	return v;
+}
+
+static inline u32 omap2_prm_set_mod_reg_bits(u32 bits, s16 module, s16 idx)
+{
+	return omap2_prm_rmw_mod_reg_bits(bits, bits, module, idx);
+}
+
+static inline u32 omap2_prm_clear_mod_reg_bits(u32 bits, s16 module, s16 idx)
+{
+	return omap2_prm_rmw_mod_reg_bits(bits, 0x0, module, idx);
+}
 
 /* These omap2_ PRM functions apply to both OMAP2 and 3 */
 extern int omap2_prm_is_hardreset_asserted(s16 prm_mod, u8 shift);
 extern int omap2_prm_assert_hardreset(s16 prm_mod, u8 shift);
 extern int omap2_prm_deassert_hardreset(s16 prm_mod, u8 rst_shift, u8 st_shift);
 
-/* OMAP3-specific VP functions */
-u32 omap3_prm_vp_check_txdone(u8 vp_id);
-void omap3_prm_vp_clear_txdone(u8 vp_id);
+extern int omap2_pwrdm_set_next_pwrst(struct powerdomain *pwrdm, u8 pwrst);
+extern int omap2_pwrdm_read_next_pwrst(struct powerdomain *pwrdm);
+extern int omap2_pwrdm_read_pwrst(struct powerdomain *pwrdm);
+extern int omap2_pwrdm_set_mem_onst(struct powerdomain *pwrdm, u8 bank,
+				    u8 pwrst);
+extern int omap2_pwrdm_set_mem_retst(struct powerdomain *pwrdm, u8 bank,
+				     u8 pwrst);
+extern int omap2_pwrdm_read_mem_pwrst(struct powerdomain *pwrdm, u8 bank);
+extern int omap2_pwrdm_read_mem_retst(struct powerdomain *pwrdm, u8 bank);
+extern int omap2_pwrdm_set_logic_retst(struct powerdomain *pwrdm, u8 pwrst);
+extern int omap2_pwrdm_wait_transition(struct powerdomain *pwrdm);
 
-/*
- * OMAP3 access functions for voltage controller (VC) and
- * voltage proccessor (VP) in the PRM.
- */
-extern u32 omap3_prm_vcvp_read(u8 offset);
-extern void omap3_prm_vcvp_write(u32 val, u8 offset);
-extern u32 omap3_prm_vcvp_rmw(u32 mask, u32 bits, u8 offset);
-
-extern void omap3xxx_prm_reconfigure_io_chain(void);
-
-/* PRM interrupt-related functions */
-extern void omap3xxx_prm_read_pending_irqs(unsigned long *events);
-extern void omap3xxx_prm_ocp_barrier(void);
-extern void omap3xxx_prm_save_and_clear_irqen(u32 *saved_mask);
-extern void omap3xxx_prm_restore_irqen(u32 *saved_mask);
+extern int omap2_clkdm_add_wkdep(struct clockdomain *clkdm1,
+				 struct clockdomain *clkdm2);
+extern int omap2_clkdm_del_wkdep(struct clockdomain *clkdm1,
+				 struct clockdomain *clkdm2);
+extern int omap2_clkdm_read_wkdep(struct clockdomain *clkdm1,
+				  struct clockdomain *clkdm2);
+extern int omap2_clkdm_clear_all_wkdeps(struct clockdomain *clkdm);
 
 #endif /* __ASSEMBLER */
 
@@ -348,7 +211,9 @@ extern void omap3xxx_prm_restore_irqen(u32 *saved_mask);
  *
  * 3430: RM_RSTST_CORE, RM_RSTST_EMU
  */
+#define OMAP_GLOBALWARM_RST_SHIFT			1
 #define OMAP_GLOBALWARM_RST_MASK			(1 << 1)
+#define OMAP_GLOBALCOLD_RST_SHIFT			0
 #define OMAP_GLOBALCOLD_RST_MASK			(1 << 0)
 
 /*
@@ -376,11 +241,4 @@ extern void omap3xxx_prm_restore_irqen(u32 *saved_mask);
 #define OMAP_LOGICRETSTATE_MASK				(1 << 2)
 
 
-/*
- * MAX_MODULE_HARDRESET_WAIT: Maximum microseconds to wait for an OMAP
- * submodule to exit hardreset
- */
-#define MAX_MODULE_HARDRESET_WAIT		10000
-
-
 #endif

arch/arm/mach-omap2/prm33xx.c

@@ -20,6 +20,7 @@
 #include <linux/io.h>
 
 #include "common.h"
+#include "powerdomain.h"
 #include "prm33xx.h"
 #include "prm-regbits-33xx.h"
 
@@ -131,3 +132,204 @@ int am33xx_prm_deassert_hardreset(u8 shift, s16 inst,
 
 	return (c == MAX_MODULE_HARDRESET_WAIT) ? -EBUSY : 0;
 }
+
+static int am33xx_pwrdm_set_next_pwrst(struct powerdomain *pwrdm, u8 pwrst)
+{
+	am33xx_prm_rmw_reg_bits(OMAP_POWERSTATE_MASK,
+				(pwrst << OMAP_POWERSTATE_SHIFT),
+				pwrdm->prcm_offs, pwrdm->pwrstctrl_offs);
+	return 0;
+}
+
+static int am33xx_pwrdm_read_next_pwrst(struct powerdomain *pwrdm)
+{
+	u32 v;
+
+	v = am33xx_prm_read_reg(pwrdm->prcm_offs,  pwrdm->pwrstctrl_offs);
+	v &= OMAP_POWERSTATE_MASK;
+	v >>= OMAP_POWERSTATE_SHIFT;
+
+	return v;
+}
+
+static int am33xx_pwrdm_read_pwrst(struct powerdomain *pwrdm)
+{
+	u32 v;
+
+	v = am33xx_prm_read_reg(pwrdm->prcm_offs, pwrdm->pwrstst_offs);
+	v &= OMAP_POWERSTATEST_MASK;
+	v >>= OMAP_POWERSTATEST_SHIFT;
+
+	return v;
+}
+
+static int am33xx_pwrdm_read_prev_pwrst(struct powerdomain *pwrdm)
+{
+	u32 v;
+
+	v = am33xx_prm_read_reg(pwrdm->prcm_offs, pwrdm->pwrstst_offs);
+	v &= AM33XX_LASTPOWERSTATEENTERED_MASK;
+	v >>= AM33XX_LASTPOWERSTATEENTERED_SHIFT;
+
+	return v;
+}
+
+static int am33xx_pwrdm_set_lowpwrstchange(struct powerdomain *pwrdm)
+{
+	am33xx_prm_rmw_reg_bits(AM33XX_LOWPOWERSTATECHANGE_MASK,
+				(1 << AM33XX_LOWPOWERSTATECHANGE_SHIFT),
+				pwrdm->prcm_offs, pwrdm->pwrstctrl_offs);
+	return 0;
+}
+
+static int am33xx_pwrdm_clear_all_prev_pwrst(struct powerdomain *pwrdm)
+{
+	am33xx_prm_rmw_reg_bits(AM33XX_LASTPOWERSTATEENTERED_MASK,
+				AM33XX_LASTPOWERSTATEENTERED_MASK,
+				pwrdm->prcm_offs, pwrdm->pwrstst_offs);
+	return 0;
+}
+
+static int am33xx_pwrdm_set_logic_retst(struct powerdomain *pwrdm, u8 pwrst)
+{
+	u32 m;
+
+	m = pwrdm->logicretstate_mask;
+	if (!m)
+		return -EINVAL;
+
+	am33xx_prm_rmw_reg_bits(m, (pwrst << __ffs(m)),
+				pwrdm->prcm_offs, pwrdm->pwrstctrl_offs);
+
+	return 0;
+}
+
+static int am33xx_pwrdm_read_logic_pwrst(struct powerdomain *pwrdm)
+{
+	u32 v;
+
+	v = am33xx_prm_read_reg(pwrdm->prcm_offs, pwrdm->pwrstst_offs);
+	v &= AM33XX_LOGICSTATEST_MASK;
+	v >>= AM33XX_LOGICSTATEST_SHIFT;
+
+	return v;
+}
+
+static int am33xx_pwrdm_read_logic_retst(struct powerdomain *pwrdm)
+{
+	u32 v, m;
+
+	m = pwrdm->logicretstate_mask;
+	if (!m)
+		return -EINVAL;
+
+	v = am33xx_prm_read_reg(pwrdm->prcm_offs, pwrdm->pwrstctrl_offs);
+	v &= m;
+	v >>= __ffs(m);
+
+	return v;
+}
+
+static int am33xx_pwrdm_set_mem_onst(struct powerdomain *pwrdm, u8 bank,
+		u8 pwrst)
+{
+	u32 m;
+
+	m = pwrdm->mem_on_mask[bank];
+	if (!m)
+		return -EINVAL;
+
+	am33xx_prm_rmw_reg_bits(m, (pwrst << __ffs(m)),
+				pwrdm->prcm_offs, pwrdm->pwrstctrl_offs);
+
+	return 0;
+}
+
+static int am33xx_pwrdm_set_mem_retst(struct powerdomain *pwrdm, u8 bank,
+					u8 pwrst)
+{
+	u32 m;
+
+	m = pwrdm->mem_ret_mask[bank];
+	if (!m)
+		return -EINVAL;
+
+	am33xx_prm_rmw_reg_bits(m, (pwrst << __ffs(m)),
+				pwrdm->prcm_offs, pwrdm->pwrstctrl_offs);
+
+	return 0;
+}
+
+static int am33xx_pwrdm_read_mem_pwrst(struct powerdomain *pwrdm, u8 bank)
+{
+	u32 m, v;
+
+	m = pwrdm->mem_pwrst_mask[bank];
+	if (!m)
+		return -EINVAL;
+
+	v = am33xx_prm_read_reg(pwrdm->prcm_offs, pwrdm->pwrstst_offs);
+	v &= m;
+	v >>= __ffs(m);
+
+	return v;
+}
+
+static int am33xx_pwrdm_read_mem_retst(struct powerdomain *pwrdm, u8 bank)
+{
+	u32 m, v;
+
+	m = pwrdm->mem_retst_mask[bank];
+	if (!m)
+		return -EINVAL;
+
+	v = am33xx_prm_read_reg(pwrdm->prcm_offs, pwrdm->pwrstctrl_offs);
+	v &= m;
+	v >>= __ffs(m);
+
+	return v;
+}
+
+static int am33xx_pwrdm_wait_transition(struct powerdomain *pwrdm)
+{
+	u32 c = 0;
+
+	/*
+	 * REVISIT: pwrdm_wait_transition() may be better implemented
+	 * via a callback and a periodic timer check -- how long do we expect
+	 * powerdomain transitions to take?
+	 */
+
+	/* XXX Is this udelay() value meaningful? */
+	while ((am33xx_prm_read_reg(pwrdm->prcm_offs, pwrdm->pwrstst_offs)
+			& OMAP_INTRANSITION_MASK) &&
+			(c++ < PWRDM_TRANSITION_BAILOUT))
+		udelay(1);
+
+	if (c > PWRDM_TRANSITION_BAILOUT) {
+		pr_err("powerdomain: %s: waited too long to complete transition\n",
+		       pwrdm->name);
+		return -EAGAIN;
+	}
+
+	pr_debug("powerdomain: completed transition in %d loops\n", c);
+
+	return 0;
+}
+
+struct pwrdm_ops am33xx_pwrdm_operations = {
+	.pwrdm_set_next_pwrst		= am33xx_pwrdm_set_next_pwrst,
+	.pwrdm_read_next_pwrst		= am33xx_pwrdm_read_next_pwrst,
+	.pwrdm_read_pwrst		= am33xx_pwrdm_read_pwrst,
+	.pwrdm_read_prev_pwrst		= am33xx_pwrdm_read_prev_pwrst,
+	.pwrdm_set_logic_retst		= am33xx_pwrdm_set_logic_retst,
+	.pwrdm_read_logic_pwrst		= am33xx_pwrdm_read_logic_pwrst,
+	.pwrdm_read_logic_retst		= am33xx_pwrdm_read_logic_retst,
+	.pwrdm_clear_all_prev_pwrst	= am33xx_pwrdm_clear_all_prev_pwrst,
+	.pwrdm_set_lowpwrstchange	= am33xx_pwrdm_set_lowpwrstchange,
+	.pwrdm_read_mem_pwrst		= am33xx_pwrdm_read_mem_pwrst,
+	.pwrdm_read_mem_retst		= am33xx_pwrdm_read_mem_retst,
+	.pwrdm_set_mem_onst		= am33xx_pwrdm_set_mem_onst,
+	.pwrdm_set_mem_retst		= am33xx_pwrdm_set_mem_retst,
+	.pwrdm_wait_transition		= am33xx_pwrdm_wait_transition,
+};

arch/arm/mach-omap2/prm3xxx.c

@@ -0,0 +1,417 @@
+/*
+ * OMAP3xxx PRM module functions
+ *
+ * Copyright (C) 2010-2012 Texas Instruments, Inc.
+ * Copyright (C) 2010 Nokia Corporation
+ * Benoît Cousson
+ * Paul Walmsley
+ * Rajendra Nayak <rnayak@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+
+#include "common.h"
+#include <plat/cpu.h>
+
+#include "vp.h"
+#include "powerdomain.h"
+#include "prm3xxx.h"
+#include "prm2xxx_3xxx.h"
+#include "cm2xxx_3xxx.h"
+#include "prm-regbits-34xx.h"
+
+static const struct omap_prcm_irq omap3_prcm_irqs[] = {
+	OMAP_PRCM_IRQ("wkup",	0,	0),
+	OMAP_PRCM_IRQ("io",	9,	1),
+};
+
+static struct omap_prcm_irq_setup omap3_prcm_irq_setup = {
+	.ack			= OMAP3_PRM_IRQSTATUS_MPU_OFFSET,
+	.mask			= OMAP3_PRM_IRQENABLE_MPU_OFFSET,
+	.nr_regs		= 1,
+	.irqs			= omap3_prcm_irqs,
+	.nr_irqs		= ARRAY_SIZE(omap3_prcm_irqs),
+	.irq			= 11 + OMAP_INTC_START,
+	.read_pending_irqs	= &omap3xxx_prm_read_pending_irqs,
+	.ocp_barrier		= &omap3xxx_prm_ocp_barrier,
+	.save_and_clear_irqen	= &omap3xxx_prm_save_and_clear_irqen,
+	.restore_irqen		= &omap3xxx_prm_restore_irqen,
+};
+
+/*
+ * omap3_prm_reset_src_map - map from bits in the PRM_RSTST hardware
+ *   register (which are specific to OMAP3xxx SoCs) to reset source ID
+ *   bit shifts (which is an OMAP SoC-independent enumeration)
+ */
+static struct prm_reset_src_map omap3xxx_prm_reset_src_map[] = {
+	{ OMAP3430_GLOBAL_COLD_RST_SHIFT, OMAP_GLOBAL_COLD_RST_SRC_ID_SHIFT },
+	{ OMAP3430_GLOBAL_SW_RST_SHIFT, OMAP_GLOBAL_WARM_RST_SRC_ID_SHIFT },
+	{ OMAP3430_SECURITY_VIOL_RST_SHIFT, OMAP_SECU_VIOL_RST_SRC_ID_SHIFT },
+	{ OMAP3430_MPU_WD_RST_SHIFT, OMAP_MPU_WD_RST_SRC_ID_SHIFT },
+	{ OMAP3430_SECURE_WD_RST_SHIFT, OMAP_MPU_WD_RST_SRC_ID_SHIFT },
+	{ OMAP3430_EXTERNAL_WARM_RST_SHIFT, OMAP_EXTWARM_RST_SRC_ID_SHIFT },
+	{ OMAP3430_VDD1_VOLTAGE_MANAGER_RST_SHIFT,
+	  OMAP_VDD_MPU_VM_RST_SRC_ID_SHIFT },
+	{ OMAP3430_VDD2_VOLTAGE_MANAGER_RST_SHIFT,
+	  OMAP_VDD_CORE_VM_RST_SRC_ID_SHIFT },
+	{ OMAP3430_ICEPICK_RST_SHIFT, OMAP_ICEPICK_RST_SRC_ID_SHIFT },
+	{ OMAP3430_ICECRUSHER_RST_SHIFT, OMAP_ICECRUSHER_RST_SRC_ID_SHIFT },
+	{ -1, -1 },
+};
+
+/* PRM VP */
+
+/*
+ * struct omap3_vp - OMAP3 VP register access description.
+ * @tranxdone_status: VP_TRANXDONE_ST bitmask in PRM_IRQSTATUS_MPU reg
+ */
+struct omap3_vp {
+	u32 tranxdone_status;
+};
+
+static struct omap3_vp omap3_vp[] = {
+	[OMAP3_VP_VDD_MPU_ID] = {
+		.tranxdone_status = OMAP3430_VP1_TRANXDONE_ST_MASK,
+	},
+	[OMAP3_VP_VDD_CORE_ID] = {
+		.tranxdone_status = OMAP3430_VP2_TRANXDONE_ST_MASK,
+	},
+};
+
+#define MAX_VP_ID ARRAY_SIZE(omap3_vp);
+
+u32 omap3_prm_vp_check_txdone(u8 vp_id)
+{
+	struct omap3_vp *vp = &omap3_vp[vp_id];
+	u32 irqstatus;
+
+	irqstatus = omap2_prm_read_mod_reg(OCP_MOD,
+					   OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
+	return irqstatus & vp->tranxdone_status;
+}
+
+void omap3_prm_vp_clear_txdone(u8 vp_id)
+{
+	struct omap3_vp *vp = &omap3_vp[vp_id];
+
+	omap2_prm_write_mod_reg(vp->tranxdone_status,
+				OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
+}
+
+u32 omap3_prm_vcvp_read(u8 offset)
+{
+	return omap2_prm_read_mod_reg(OMAP3430_GR_MOD, offset);
+}
+
+void omap3_prm_vcvp_write(u32 val, u8 offset)
+{
+	omap2_prm_write_mod_reg(val, OMAP3430_GR_MOD, offset);
+}
+
+u32 omap3_prm_vcvp_rmw(u32 mask, u32 bits, u8 offset)
+{
+	return omap2_prm_rmw_mod_reg_bits(mask, bits, OMAP3430_GR_MOD, offset);
+}
+
+/**
+ * omap3xxx_prm_dpll3_reset - use DPLL3 reset to reboot the OMAP SoC
+ *
+ * Set the DPLL3 reset bit, which should reboot the SoC.  This is the
+ * recommended way to restart the SoC, considering Errata i520.  No
+ * return value.
+ */
+void omap3xxx_prm_dpll3_reset(void)
+{
+	omap2_prm_set_mod_reg_bits(OMAP_RST_DPLL3_MASK, OMAP3430_GR_MOD,
+				   OMAP2_RM_RSTCTRL);
+	/* OCP barrier */
+	omap2_prm_read_mod_reg(OMAP3430_GR_MOD, OMAP2_RM_RSTCTRL);
+}
+
+/**
+ * omap3xxx_prm_read_pending_irqs - read pending PRM MPU IRQs into @events
+ * @events: ptr to a u32, preallocated by caller
+ *
+ * Read PRM_IRQSTATUS_MPU bits, AND'ed with the currently-enabled PRM
+ * MPU IRQs, and store the result into the u32 pointed to by @events.
+ * No return value.
+ */
+void omap3xxx_prm_read_pending_irqs(unsigned long *events)
+{
+	u32 mask, st;
+
+	/* XXX Can the mask read be avoided (e.g., can it come from RAM?) */
+	mask = omap2_prm_read_mod_reg(OCP_MOD, OMAP3_PRM_IRQENABLE_MPU_OFFSET);
+	st = omap2_prm_read_mod_reg(OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
+
+	events[0] = mask & st;
+}
+
+/**
+ * omap3xxx_prm_ocp_barrier - force buffered MPU writes to the PRM to complete
+ *
+ * Force any buffered writes to the PRM IP block to complete.  Needed
+ * by the PRM IRQ handler, which reads and writes directly to the IP
+ * block, to avoid race conditions after acknowledging or clearing IRQ
+ * bits.  No return value.
+ */
+void omap3xxx_prm_ocp_barrier(void)
+{
+	omap2_prm_read_mod_reg(OCP_MOD, OMAP3_PRM_REVISION_OFFSET);
+}
+
+/**
+ * omap3xxx_prm_save_and_clear_irqen - save/clear PRM_IRQENABLE_MPU reg
+ * @saved_mask: ptr to a u32 array to save IRQENABLE bits
+ *
+ * Save the PRM_IRQENABLE_MPU register to @saved_mask.  @saved_mask
+ * must be allocated by the caller.  Intended to be used in the PRM
+ * interrupt handler suspend callback.  The OCP barrier is needed to
+ * ensure the write to disable PRM interrupts reaches the PRM before
+ * returning; otherwise, spurious interrupts might occur.  No return
+ * value.
+ */
+void omap3xxx_prm_save_and_clear_irqen(u32 *saved_mask)
+{
+	saved_mask[0] = omap2_prm_read_mod_reg(OCP_MOD,
+					       OMAP3_PRM_IRQENABLE_MPU_OFFSET);
+	omap2_prm_write_mod_reg(0, OCP_MOD, OMAP3_PRM_IRQENABLE_MPU_OFFSET);
+
+	/* OCP barrier */
+	omap2_prm_read_mod_reg(OCP_MOD, OMAP3_PRM_REVISION_OFFSET);
+}
+
+/**
+ * omap3xxx_prm_restore_irqen - set PRM_IRQENABLE_MPU register from args
+ * @saved_mask: ptr to a u32 array of IRQENABLE bits saved previously
+ *
+ * Restore the PRM_IRQENABLE_MPU register from @saved_mask.  Intended
+ * to be used in the PRM interrupt handler resume callback to restore
+ * values saved by omap3xxx_prm_save_and_clear_irqen().  No OCP
+ * barrier should be needed here; any pending PRM interrupts will fire
+ * once the writes reach the PRM.  No return value.
+ */
+void omap3xxx_prm_restore_irqen(u32 *saved_mask)
+{
+	omap2_prm_write_mod_reg(saved_mask[0], OCP_MOD,
+				OMAP3_PRM_IRQENABLE_MPU_OFFSET);
+}
+
+/**
+ * omap3xxx_prm_reconfigure_io_chain - clear latches and reconfigure I/O chain
+ *
+ * Clear any previously-latched I/O wakeup events and ensure that the
+ * I/O wakeup gates are aligned with the current mux settings.  Works
+ * by asserting WUCLKIN, waiting for WUCLKOUT to be asserted, and then
+ * deasserting WUCLKIN and clearing the ST_IO_CHAIN WKST bit.  No
+ * return value.
+ */
+void omap3xxx_prm_reconfigure_io_chain(void)
+{
+	int i = 0;
+
+	omap2_prm_set_mod_reg_bits(OMAP3430_EN_IO_CHAIN_MASK, WKUP_MOD,
+				   PM_WKEN);
+
+	omap_test_timeout(omap2_prm_read_mod_reg(WKUP_MOD, PM_WKST) &
+			  OMAP3430_ST_IO_CHAIN_MASK,
+			  MAX_IOPAD_LATCH_TIME, i);
+	if (i == MAX_IOPAD_LATCH_TIME)
+		pr_warn("PRM: I/O chain clock line assertion timed out\n");
+
+	omap2_prm_clear_mod_reg_bits(OMAP3430_EN_IO_CHAIN_MASK, WKUP_MOD,
+				     PM_WKEN);
+
+	omap2_prm_set_mod_reg_bits(OMAP3430_ST_IO_CHAIN_MASK, WKUP_MOD,
+				   PM_WKST);
+
+	omap2_prm_read_mod_reg(WKUP_MOD, PM_WKST);
+}
+
+/**
+ * omap3xxx_prm_enable_io_wakeup - enable wakeup events from I/O wakeup latches
+ *
+ * Activates the I/O wakeup event latches and allows events logged by
+ * those latches to signal a wakeup event to the PRCM.  For I/O
+ * wakeups to occur, WAKEUPENABLE bits must be set in the pad mux
+ * registers, and omap3xxx_prm_reconfigure_io_chain() must be called.
+ * No return value.
+ */
+static void __init omap3xxx_prm_enable_io_wakeup(void)
+{
+	if (omap3_has_io_wakeup())
+		omap2_prm_set_mod_reg_bits(OMAP3430_EN_IO_MASK, WKUP_MOD,
+					   PM_WKEN);
+}
+
+/**
+ * omap3xxx_prm_read_reset_sources - return the last SoC reset source
+ *
+ * Return a u32 representing the last reset sources of the SoC.  The
+ * returned reset source bits are standardized across OMAP SoCs.
+ */
+static u32 omap3xxx_prm_read_reset_sources(void)
+{
+	struct prm_reset_src_map *p;
+	u32 r = 0;
+	u32 v;
+
+	v = omap2_prm_read_mod_reg(WKUP_MOD, OMAP2_RM_RSTST);
+
+	p = omap3xxx_prm_reset_src_map;
+	while (p->reg_shift >= 0 && p->std_shift >= 0) {
+		if (v & (1 << p->reg_shift))
+			r |= 1 << p->std_shift;
+		p++;
+	}
+
+	return r;
+}
+
+/* Powerdomain low-level functions */
+
+/* Applicable only for OMAP3. Not supported on OMAP2 */
+static int omap3_pwrdm_read_prev_pwrst(struct powerdomain *pwrdm)
+{
+	return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs,
+					     OMAP3430_PM_PREPWSTST,
+					     OMAP3430_LASTPOWERSTATEENTERED_MASK);
+}
+
+static int omap3_pwrdm_read_logic_pwrst(struct powerdomain *pwrdm)
+{
+	return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs,
+					     OMAP2_PM_PWSTST,
+					     OMAP3430_LOGICSTATEST_MASK);
+}
+
+static int omap3_pwrdm_read_logic_retst(struct powerdomain *pwrdm)
+{
+	return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs,
+					     OMAP2_PM_PWSTCTRL,
+					     OMAP3430_LOGICSTATEST_MASK);
+}
+
+static int omap3_pwrdm_read_prev_logic_pwrst(struct powerdomain *pwrdm)
+{
+	return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs,
+					     OMAP3430_PM_PREPWSTST,
+					     OMAP3430_LASTLOGICSTATEENTERED_MASK);
+}
+
+static int omap3_get_mem_bank_lastmemst_mask(u8 bank)
+{
+	switch (bank) {
+	case 0:
+		return OMAP3430_LASTMEM1STATEENTERED_MASK;
+	case 1:
+		return OMAP3430_LASTMEM2STATEENTERED_MASK;
+	case 2:
+		return OMAP3430_LASTSHAREDL2CACHEFLATSTATEENTERED_MASK;
+	case 3:
+		return OMAP3430_LASTL2FLATMEMSTATEENTERED_MASK;
+	default:
+		WARN_ON(1); /* should never happen */
+		return -EEXIST;
+	}
+	return 0;
+}
+
+static int omap3_pwrdm_read_prev_mem_pwrst(struct powerdomain *pwrdm, u8 bank)
+{
+	u32 m;
+
+	m = omap3_get_mem_bank_lastmemst_mask(bank);
+
+	return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs,
+				OMAP3430_PM_PREPWSTST, m);
+}
+
+static int omap3_pwrdm_clear_all_prev_pwrst(struct powerdomain *pwrdm)
+{
+	omap2_prm_write_mod_reg(0, pwrdm->prcm_offs, OMAP3430_PM_PREPWSTST);
+	return 0;
+}
+
+static int omap3_pwrdm_enable_hdwr_sar(struct powerdomain *pwrdm)
+{
+	return omap2_prm_rmw_mod_reg_bits(0,
+					  1 << OMAP3430ES2_SAVEANDRESTORE_SHIFT,
+					  pwrdm->prcm_offs, OMAP2_PM_PWSTCTRL);
+}
+
+static int omap3_pwrdm_disable_hdwr_sar(struct powerdomain *pwrdm)
+{
+	return omap2_prm_rmw_mod_reg_bits(1 << OMAP3430ES2_SAVEANDRESTORE_SHIFT,
+					  0, pwrdm->prcm_offs,
+					  OMAP2_PM_PWSTCTRL);
+}
+
+struct pwrdm_ops omap3_pwrdm_operations = {
+	.pwrdm_set_next_pwrst	= omap2_pwrdm_set_next_pwrst,
+	.pwrdm_read_next_pwrst	= omap2_pwrdm_read_next_pwrst,
+	.pwrdm_read_pwrst	= omap2_pwrdm_read_pwrst,
+	.pwrdm_read_prev_pwrst	= omap3_pwrdm_read_prev_pwrst,
+	.pwrdm_set_logic_retst	= omap2_pwrdm_set_logic_retst,
+	.pwrdm_read_logic_pwrst	= omap3_pwrdm_read_logic_pwrst,
+	.pwrdm_read_logic_retst	= omap3_pwrdm_read_logic_retst,
+	.pwrdm_read_prev_logic_pwrst	= omap3_pwrdm_read_prev_logic_pwrst,
+	.pwrdm_set_mem_onst	= omap2_pwrdm_set_mem_onst,
+	.pwrdm_set_mem_retst	= omap2_pwrdm_set_mem_retst,
+	.pwrdm_read_mem_pwrst	= omap2_pwrdm_read_mem_pwrst,
+	.pwrdm_read_mem_retst	= omap2_pwrdm_read_mem_retst,
+	.pwrdm_read_prev_mem_pwrst	= omap3_pwrdm_read_prev_mem_pwrst,
+	.pwrdm_clear_all_prev_pwrst	= omap3_pwrdm_clear_all_prev_pwrst,
+	.pwrdm_enable_hdwr_sar	= omap3_pwrdm_enable_hdwr_sar,
+	.pwrdm_disable_hdwr_sar	= omap3_pwrdm_disable_hdwr_sar,
+	.pwrdm_wait_transition	= omap2_pwrdm_wait_transition,
+};
+
+/*
+ *
+ */
+
+static struct prm_ll_data omap3xxx_prm_ll_data = {
+	.read_reset_sources = &omap3xxx_prm_read_reset_sources,
+};
+
+static int __init omap3xxx_prm_init(void)
+{
+	int ret;
+
+	if (!cpu_is_omap34xx())
+		return 0;
+
+	ret = prm_register(&omap3xxx_prm_ll_data);
+	if (ret)
+		return ret;
+
+	omap3xxx_prm_enable_io_wakeup();
+	ret = omap_prcm_register_chain_handler(&omap3_prcm_irq_setup);
+	if (!ret)
+		irq_set_status_flags(omap_prcm_event_to_irq("io"),
+				     IRQ_NOAUTOEN);
+
+
+	return ret;
+}
+subsys_initcall(omap3xxx_prm_init);
+
+static void __exit omap3xxx_prm_exit(void)
+{
+	if (!cpu_is_omap34xx())
+		return;
+
+	/* Should never happen */
+	WARN(prm_unregister(&omap3xxx_prm_ll_data),
+	     "%s: prm_ll_data function pointer mismatch\n", __func__);
+}
+__exitcall(omap3xxx_prm_exit);

arch/arm/mach-omap2/prm3xxx.h

@@ -0,0 +1,162 @@
+/*
+ * OMAP3xxx Power/Reset Management (PRM) register definitions
+ *
+ * Copyright (C) 2007-2009, 2011-2012 Texas Instruments, Inc.
+ * Copyright (C) 2008-2010 Nokia Corporation
+ * Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * The PRM hardware modules on the OMAP2/3 are quite similar to each
+ * other.  The PRM on OMAP4 has a new register layout, and is handled
+ * in a separate file.
+ */
+#ifndef __ARCH_ARM_MACH_OMAP2_PRM3XXX_H
+#define __ARCH_ARM_MACH_OMAP2_PRM3XXX_H
+
+#include "prcm-common.h"
+#include "prm.h"
+#include "prm2xxx_3xxx.h"
+
+#define OMAP34XX_PRM_REGADDR(module, reg)				\
+		OMAP2_L4_IO_ADDRESS(OMAP3430_PRM_BASE + (module) + (reg))
+
+
+/*
+ * OMAP3-specific global PRM registers
+ * Use __raw_{read,write}l() with these registers.
+ *
+ * With a few exceptions, these are the register names beginning with
+ * PRM_* on 34xx.  (The exceptions are the IRQSTATUS and IRQENABLE
+ * bits.)
+ */
+
+#define OMAP3_PRM_REVISION_OFFSET	0x0004
+#define OMAP3430_PRM_REVISION		OMAP34XX_PRM_REGADDR(OCP_MOD, 0x0004)
+#define OMAP3_PRM_SYSCONFIG_OFFSET	0x0014
+#define OMAP3430_PRM_SYSCONFIG		OMAP34XX_PRM_REGADDR(OCP_MOD, 0x0014)
+
+#define OMAP3_PRM_IRQSTATUS_MPU_OFFSET	0x0018
+#define OMAP3430_PRM_IRQSTATUS_MPU	OMAP34XX_PRM_REGADDR(OCP_MOD, 0x0018)
+#define OMAP3_PRM_IRQENABLE_MPU_OFFSET	0x001c
+#define OMAP3430_PRM_IRQENABLE_MPU	OMAP34XX_PRM_REGADDR(OCP_MOD, 0x001c)
+
+
+#define OMAP3_PRM_VC_SMPS_SA_OFFSET	0x0020
+#define OMAP3430_PRM_VC_SMPS_SA		OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0020)
+#define OMAP3_PRM_VC_SMPS_VOL_RA_OFFSET	0x0024
+#define OMAP3430_PRM_VC_SMPS_VOL_RA	OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0024)
+#define OMAP3_PRM_VC_SMPS_CMD_RA_OFFSET	0x0028
+#define OMAP3430_PRM_VC_SMPS_CMD_RA	OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0028)
+#define OMAP3_PRM_VC_CMD_VAL_0_OFFSET	0x002c
+#define OMAP3430_PRM_VC_CMD_VAL_0	OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x002c)
+#define OMAP3_PRM_VC_CMD_VAL_1_OFFSET	0x0030
+#define OMAP3430_PRM_VC_CMD_VAL_1	OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0030)
+#define OMAP3_PRM_VC_CH_CONF_OFFSET	0x0034
+#define OMAP3430_PRM_VC_CH_CONF		OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0034)
+#define OMAP3_PRM_VC_I2C_CFG_OFFSET	0x0038
+#define OMAP3430_PRM_VC_I2C_CFG		OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0038)
+#define OMAP3_PRM_VC_BYPASS_VAL_OFFSET	0x003c
+#define OMAP3430_PRM_VC_BYPASS_VAL	OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x003c)
+#define OMAP3_PRM_RSTCTRL_OFFSET	0x0050
+#define OMAP3430_PRM_RSTCTRL		OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0050)
+#define OMAP3_PRM_RSTTIME_OFFSET	0x0054
+#define OMAP3430_PRM_RSTTIME		OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0054)
+#define OMAP3_PRM_RSTST_OFFSET	0x0058
+#define OMAP3430_PRM_RSTST		OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0058)
+#define OMAP3_PRM_VOLTCTRL_OFFSET	0x0060
+#define OMAP3430_PRM_VOLTCTRL		OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0060)
+#define OMAP3_PRM_SRAM_PCHARGE_OFFSET	0x0064
+#define OMAP3430_PRM_SRAM_PCHARGE	OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0064)
+#define OMAP3_PRM_CLKSRC_CTRL_OFFSET	0x0070
+#define OMAP3430_PRM_CLKSRC_CTRL	OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0070)
+#define OMAP3_PRM_VOLTSETUP1_OFFSET	0x0090
+#define OMAP3430_PRM_VOLTSETUP1		OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0090)
+#define OMAP3_PRM_VOLTOFFSET_OFFSET	0x0094
+#define OMAP3430_PRM_VOLTOFFSET		OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0094)
+#define OMAP3_PRM_CLKSETUP_OFFSET	0x0098
+#define OMAP3430_PRM_CLKSETUP		OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0098)
+#define OMAP3_PRM_POLCTRL_OFFSET	0x009c
+#define OMAP3430_PRM_POLCTRL		OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x009c)
+#define OMAP3_PRM_VOLTSETUP2_OFFSET	0x00a0
+#define OMAP3430_PRM_VOLTSETUP2		OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00a0)
+#define OMAP3_PRM_VP1_CONFIG_OFFSET	0x00b0
+#define OMAP3430_PRM_VP1_CONFIG		OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00b0)
+#define OMAP3_PRM_VP1_VSTEPMIN_OFFSET	0x00b4
+#define OMAP3430_PRM_VP1_VSTEPMIN	OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00b4)
+#define OMAP3_PRM_VP1_VSTEPMAX_OFFSET	0x00b8
+#define OMAP3430_PRM_VP1_VSTEPMAX	OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00b8)
+#define OMAP3_PRM_VP1_VLIMITTO_OFFSET	0x00bc
+#define OMAP3430_PRM_VP1_VLIMITTO	OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00bc)
+#define OMAP3_PRM_VP1_VOLTAGE_OFFSET	0x00c0
+#define OMAP3430_PRM_VP1_VOLTAGE	OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00c0)
+#define OMAP3_PRM_VP1_STATUS_OFFSET	0x00c4
+#define OMAP3430_PRM_VP1_STATUS		OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00c4)
+#define OMAP3_PRM_VP2_CONFIG_OFFSET	0x00d0
+#define OMAP3430_PRM_VP2_CONFIG		OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00d0)
+#define OMAP3_PRM_VP2_VSTEPMIN_OFFSET	0x00d4
+#define OMAP3430_PRM_VP2_VSTEPMIN	OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00d4)
+#define OMAP3_PRM_VP2_VSTEPMAX_OFFSET	0x00d8
+#define OMAP3430_PRM_VP2_VSTEPMAX	OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00d8)
+#define OMAP3_PRM_VP2_VLIMITTO_OFFSET	0x00dc
+#define OMAP3430_PRM_VP2_VLIMITTO	OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00dc)
+#define OMAP3_PRM_VP2_VOLTAGE_OFFSET	0x00e0
+#define OMAP3430_PRM_VP2_VOLTAGE	OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00e0)
+#define OMAP3_PRM_VP2_STATUS_OFFSET	0x00e4
+#define OMAP3430_PRM_VP2_STATUS		OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00e4)
+
+#define OMAP3_PRM_CLKSEL_OFFSET	0x0040
+#define OMAP3430_PRM_CLKSEL		OMAP34XX_PRM_REGADDR(OMAP3430_CCR_MOD, 0x0040)
+#define OMAP3_PRM_CLKOUT_CTRL_OFFSET	0x0070
+#define OMAP3430_PRM_CLKOUT_CTRL	OMAP34XX_PRM_REGADDR(OMAP3430_CCR_MOD, 0x0070)
+
+/* OMAP3 specific register offsets */
+#define OMAP3430ES2_PM_WKEN3				0x00f0
+#define OMAP3430ES2_PM_WKST3				0x00b8
+
+#define OMAP3430_PM_MPUGRPSEL				0x00a4
+#define OMAP3430_PM_MPUGRPSEL1				OMAP3430_PM_MPUGRPSEL
+#define OMAP3430ES2_PM_MPUGRPSEL3			0x00f8
+
+#define OMAP3430_PM_IVAGRPSEL				0x00a8
+#define OMAP3430_PM_IVAGRPSEL1				OMAP3430_PM_IVAGRPSEL
+#define OMAP3430ES2_PM_IVAGRPSEL3			0x00f4
+
+#define OMAP3430_PM_PREPWSTST				0x00e8
+
+#define OMAP3430_PRM_IRQSTATUS_IVA2			0x00f8
+#define OMAP3430_PRM_IRQENABLE_IVA2			0x00fc
+
+
+#ifndef __ASSEMBLER__
+
+/* OMAP3-specific VP functions */
+u32 omap3_prm_vp_check_txdone(u8 vp_id);
+void omap3_prm_vp_clear_txdone(u8 vp_id);
+
+/*
+ * OMAP3 access functions for voltage controller (VC) and
+ * voltage proccessor (VP) in the PRM.
+ */
+extern u32 omap3_prm_vcvp_read(u8 offset);
+extern void omap3_prm_vcvp_write(u32 val, u8 offset);
+extern u32 omap3_prm_vcvp_rmw(u32 mask, u32 bits, u8 offset);
+
+extern void omap3xxx_prm_reconfigure_io_chain(void);
+
+/* PRM interrupt-related functions */
+extern void omap3xxx_prm_read_pending_irqs(unsigned long *events);
+extern void omap3xxx_prm_ocp_barrier(void);
+extern void omap3xxx_prm_save_and_clear_irqen(u32 *saved_mask);
+extern void omap3xxx_prm_restore_irqen(u32 *saved_mask);
+
+extern void omap3xxx_prm_dpll3_reset(void);
+
+extern u32 omap3xxx_prm_get_reset_sources(void);
+
+#endif /* __ASSEMBLER */
+
+
+#endif

arch/arm/mach-omap2/prm44xx.c

@@ -1,10 +1,11 @@
 /*
  * OMAP4 PRM module functions
  *
- * Copyright (C) 2011 Texas Instruments, Inc.
+ * Copyright (C) 2011-2012 Texas Instruments, Inc.
  * Copyright (C) 2010 Nokia Corporation
  * Benoît Cousson
  * Paul Walmsley
+ * Rajendra Nayak <rnayak@ti.com>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -17,7 +18,6 @@
 #include <linux/err.h>
 #include <linux/io.h>
 
-#include <plat/prcm.h>
 
 #include "soc.h"
 #include "iomap.h"
@@ -27,6 +27,9 @@
 #include "prm-regbits-44xx.h"
 #include "prcm44xx.h"
 #include "prminst44xx.h"
+#include "powerdomain.h"
+
+/* Static data */
 
 static const struct omap_prcm_irq omap4_prcm_irqs[] = {
 	OMAP_PRCM_IRQ("wkup",   0,      0),
@@ -46,6 +49,33 @@ static struct omap_prcm_irq_setup omap4_prcm_irq_setup = {
 	.restore_irqen		= &omap44xx_prm_restore_irqen,
 };
 
+/*
+ * omap44xx_prm_reset_src_map - map from bits in the PRM_RSTST
+ *   hardware register (which are specific to OMAP44xx SoCs) to reset
+ *   source ID bit shifts (which is an OMAP SoC-independent
+ *   enumeration)
+ */
+static struct prm_reset_src_map omap44xx_prm_reset_src_map[] = {
+	{ OMAP4430_RST_GLOBAL_WARM_SW_SHIFT,
+	  OMAP_GLOBAL_WARM_RST_SRC_ID_SHIFT },
+	{ OMAP4430_RST_GLOBAL_COLD_SW_SHIFT,
+	  OMAP_GLOBAL_COLD_RST_SRC_ID_SHIFT },
+	{ OMAP4430_MPU_SECURITY_VIOL_RST_SHIFT,
+	  OMAP_SECU_VIOL_RST_SRC_ID_SHIFT },
+	{ OMAP4430_MPU_WDT_RST_SHIFT, OMAP_MPU_WD_RST_SRC_ID_SHIFT },
+	{ OMAP4430_SECURE_WDT_RST_SHIFT, OMAP_SECU_WD_RST_SRC_ID_SHIFT },
+	{ OMAP4430_EXTERNAL_WARM_RST_SHIFT, OMAP_EXTWARM_RST_SRC_ID_SHIFT },
+	{ OMAP4430_VDD_MPU_VOLT_MGR_RST_SHIFT,
+	  OMAP_VDD_MPU_VM_RST_SRC_ID_SHIFT },
+	{ OMAP4430_VDD_IVA_VOLT_MGR_RST_SHIFT,
+	  OMAP_VDD_IVA_VM_RST_SRC_ID_SHIFT },
+	{ OMAP4430_VDD_CORE_VOLT_MGR_RST_SHIFT,
+	  OMAP_VDD_CORE_VM_RST_SRC_ID_SHIFT },
+	{ OMAP4430_ICEPICK_RST_SHIFT, OMAP_ICEPICK_RST_SRC_ID_SHIFT },
+	{ OMAP4430_C2C_RST_SHIFT, OMAP_C2C_RST_SRC_ID_SHIFT },
+	{ -1, -1 },
+};
+
 /* PRM low-level functions */
 
 /* Read a register in a CM/PRM instance in the PRM module */
@@ -291,12 +321,324 @@ static void __init omap44xx_prm_enable_io_wakeup(void)
 				    OMAP4_PRM_IO_PMCTRL_OFFSET);
 }
 
-static int __init omap4xxx_prcm_init(void)
+/**
+ * omap44xx_prm_read_reset_sources - return the last SoC reset source
+ *
+ * Return a u32 representing the last reset sources of the SoC.  The
+ * returned reset source bits are standardized across OMAP SoCs.
+ */
+static u32 omap44xx_prm_read_reset_sources(void)
 {
-	if (cpu_is_omap44xx()) {
-		omap44xx_prm_enable_io_wakeup();
-		return omap_prcm_register_chain_handler(&omap4_prcm_irq_setup);
+	struct prm_reset_src_map *p;
+	u32 r = 0;
+	u32 v;
+
+	v = omap4_prm_read_inst_reg(OMAP4430_PRM_OCP_SOCKET_INST,
+				    OMAP4_RM_RSTST);
+
+	p = omap44xx_prm_reset_src_map;
+	while (p->reg_shift >= 0 && p->std_shift >= 0) {
+		if (v & (1 << p->reg_shift))
+			r |= 1 << p->std_shift;
+		p++;
 	}
+
+	return r;
+}
+
+/* Powerdomain low-level functions */
+
+static int omap4_pwrdm_set_next_pwrst(struct powerdomain *pwrdm, u8 pwrst)
+{
+	omap4_prminst_rmw_inst_reg_bits(OMAP_POWERSTATE_MASK,
+					(pwrst << OMAP_POWERSTATE_SHIFT),
+					pwrdm->prcm_partition,
+					pwrdm->prcm_offs, OMAP4_PM_PWSTCTRL);
 	return 0;
 }
-subsys_initcall(omap4xxx_prcm_init);
+
+static int omap4_pwrdm_read_next_pwrst(struct powerdomain *pwrdm)
+{
+	u32 v;
+
+	v = omap4_prminst_read_inst_reg(pwrdm->prcm_partition, pwrdm->prcm_offs,
+					OMAP4_PM_PWSTCTRL);
+	v &= OMAP_POWERSTATE_MASK;
+	v >>= OMAP_POWERSTATE_SHIFT;
+
+	return v;
+}
+
+static int omap4_pwrdm_read_pwrst(struct powerdomain *pwrdm)
+{
+	u32 v;
+
+	v = omap4_prminst_read_inst_reg(pwrdm->prcm_partition, pwrdm->prcm_offs,
+					OMAP4_PM_PWSTST);
+	v &= OMAP_POWERSTATEST_MASK;
+	v >>= OMAP_POWERSTATEST_SHIFT;
+
+	return v;
+}
+
+static int omap4_pwrdm_read_prev_pwrst(struct powerdomain *pwrdm)
+{
+	u32 v;
+
+	v = omap4_prminst_read_inst_reg(pwrdm->prcm_partition, pwrdm->prcm_offs,
+					OMAP4_PM_PWSTST);
+	v &= OMAP4430_LASTPOWERSTATEENTERED_MASK;
+	v >>= OMAP4430_LASTPOWERSTATEENTERED_SHIFT;
+
+	return v;
+}
+
+static int omap4_pwrdm_set_lowpwrstchange(struct powerdomain *pwrdm)
+{
+	omap4_prminst_rmw_inst_reg_bits(OMAP4430_LOWPOWERSTATECHANGE_MASK,
+					(1 << OMAP4430_LOWPOWERSTATECHANGE_SHIFT),
+					pwrdm->prcm_partition,
+					pwrdm->prcm_offs, OMAP4_PM_PWSTCTRL);
+	return 0;
+}
+
+static int omap4_pwrdm_clear_all_prev_pwrst(struct powerdomain *pwrdm)
+{
+	omap4_prminst_rmw_inst_reg_bits(OMAP4430_LASTPOWERSTATEENTERED_MASK,
+					OMAP4430_LASTPOWERSTATEENTERED_MASK,
+					pwrdm->prcm_partition,
+					pwrdm->prcm_offs, OMAP4_PM_PWSTST);
+	return 0;
+}
+
+static int omap4_pwrdm_set_logic_retst(struct powerdomain *pwrdm, u8 pwrst)
+{
+	u32 v;
+
+	v = pwrst << __ffs(OMAP4430_LOGICRETSTATE_MASK);
+	omap4_prminst_rmw_inst_reg_bits(OMAP4430_LOGICRETSTATE_MASK, v,
+					pwrdm->prcm_partition, pwrdm->prcm_offs,
+					OMAP4_PM_PWSTCTRL);
+
+	return 0;
+}
+
+static int omap4_pwrdm_set_mem_onst(struct powerdomain *pwrdm, u8 bank,
+				    u8 pwrst)
+{
+	u32 m;
+
+	m = omap2_pwrdm_get_mem_bank_onstate_mask(bank);
+
+	omap4_prminst_rmw_inst_reg_bits(m, (pwrst << __ffs(m)),
+					pwrdm->prcm_partition, pwrdm->prcm_offs,
+					OMAP4_PM_PWSTCTRL);
+
+	return 0;
+}
+
+static int omap4_pwrdm_set_mem_retst(struct powerdomain *pwrdm, u8 bank,
+				     u8 pwrst)
+{
+	u32 m;
+
+	m = omap2_pwrdm_get_mem_bank_retst_mask(bank);
+
+	omap4_prminst_rmw_inst_reg_bits(m, (pwrst << __ffs(m)),
+					pwrdm->prcm_partition, pwrdm->prcm_offs,
+					OMAP4_PM_PWSTCTRL);
+
+	return 0;
+}
+
+static int omap4_pwrdm_read_logic_pwrst(struct powerdomain *pwrdm)
+{
+	u32 v;
+
+	v = omap4_prminst_read_inst_reg(pwrdm->prcm_partition, pwrdm->prcm_offs,
+					OMAP4_PM_PWSTST);
+	v &= OMAP4430_LOGICSTATEST_MASK;
+	v >>= OMAP4430_LOGICSTATEST_SHIFT;
+
+	return v;
+}
+
+static int omap4_pwrdm_read_logic_retst(struct powerdomain *pwrdm)
+{
+	u32 v;
+
+	v = omap4_prminst_read_inst_reg(pwrdm->prcm_partition, pwrdm->prcm_offs,
+					OMAP4_PM_PWSTCTRL);
+	v &= OMAP4430_LOGICRETSTATE_MASK;
+	v >>= OMAP4430_LOGICRETSTATE_SHIFT;
+
+	return v;
+}
+
+/**
+ * omap4_pwrdm_read_prev_logic_pwrst - read the previous logic powerstate
+ * @pwrdm: struct powerdomain * to read the state for
+ *
+ * Reads the previous logic powerstate for a powerdomain. This
+ * function must determine the previous logic powerstate by first
+ * checking the previous powerstate for the domain. If that was OFF,
+ * then logic has been lost. If previous state was RETENTION, the
+ * function reads the setting for the next retention logic state to
+ * see the actual value.  In every other case, the logic is
+ * retained. Returns either PWRDM_POWER_OFF or PWRDM_POWER_RET
+ * depending whether the logic was retained or not.
+ */
+static int omap4_pwrdm_read_prev_logic_pwrst(struct powerdomain *pwrdm)
+{
+	int state;
+
+	state = omap4_pwrdm_read_prev_pwrst(pwrdm);
+
+	if (state == PWRDM_POWER_OFF)
+		return PWRDM_POWER_OFF;
+
+	if (state != PWRDM_POWER_RET)
+		return PWRDM_POWER_RET;
+
+	return omap4_pwrdm_read_logic_retst(pwrdm);
+}
+
+static int omap4_pwrdm_read_mem_pwrst(struct powerdomain *pwrdm, u8 bank)
+{
+	u32 m, v;
+
+	m = omap2_pwrdm_get_mem_bank_stst_mask(bank);
+
+	v = omap4_prminst_read_inst_reg(pwrdm->prcm_partition, pwrdm->prcm_offs,
+					OMAP4_PM_PWSTST);
+	v &= m;
+	v >>= __ffs(m);
+
+	return v;
+}
+
+static int omap4_pwrdm_read_mem_retst(struct powerdomain *pwrdm, u8 bank)
+{
+	u32 m, v;
+
+	m = omap2_pwrdm_get_mem_bank_retst_mask(bank);
+
+	v = omap4_prminst_read_inst_reg(pwrdm->prcm_partition, pwrdm->prcm_offs,
+					OMAP4_PM_PWSTCTRL);
+	v &= m;
+	v >>= __ffs(m);
+
+	return v;
+}
+
+/**
+ * omap4_pwrdm_read_prev_mem_pwrst - reads the previous memory powerstate
+ * @pwrdm: struct powerdomain * to read mem powerstate for
+ * @bank: memory bank index
+ *
+ * Reads the previous memory powerstate for a powerdomain. This
+ * function must determine the previous memory powerstate by first
+ * checking the previous powerstate for the domain. If that was OFF,
+ * then logic has been lost. If previous state was RETENTION, the
+ * function reads the setting for the next memory retention state to
+ * see the actual value.  In every other case, the logic is
+ * retained. Returns either PWRDM_POWER_OFF or PWRDM_POWER_RET
+ * depending whether logic was retained or not.
+ */
+static int omap4_pwrdm_read_prev_mem_pwrst(struct powerdomain *pwrdm, u8 bank)
+{
+	int state;
+
+	state = omap4_pwrdm_read_prev_pwrst(pwrdm);
+
+	if (state == PWRDM_POWER_OFF)
+		return PWRDM_POWER_OFF;
+
+	if (state != PWRDM_POWER_RET)
+		return PWRDM_POWER_RET;
+
+	return omap4_pwrdm_read_mem_retst(pwrdm, bank);
+}
+
+static int omap4_pwrdm_wait_transition(struct powerdomain *pwrdm)
+{
+	u32 c = 0;
+
+	/*
+	 * REVISIT: pwrdm_wait_transition() may be better implemented
+	 * via a callback and a periodic timer check -- how long do we expect
+	 * powerdomain transitions to take?
+	 */
+
+	/* XXX Is this udelay() value meaningful? */
+	while ((omap4_prminst_read_inst_reg(pwrdm->prcm_partition,
+					    pwrdm->prcm_offs,
+					    OMAP4_PM_PWSTST) &
+		OMAP_INTRANSITION_MASK) &&
+	       (c++ < PWRDM_TRANSITION_BAILOUT))
+		udelay(1);
+
+	if (c > PWRDM_TRANSITION_BAILOUT) {
+		pr_err("powerdomain: %s: waited too long to complete transition\n",
+		       pwrdm->name);
+		return -EAGAIN;
+	}
+
+	pr_debug("powerdomain: completed transition in %d loops\n", c);
+
+	return 0;
+}
+
+struct pwrdm_ops omap4_pwrdm_operations = {
+	.pwrdm_set_next_pwrst	= omap4_pwrdm_set_next_pwrst,
+	.pwrdm_read_next_pwrst	= omap4_pwrdm_read_next_pwrst,
+	.pwrdm_read_pwrst	= omap4_pwrdm_read_pwrst,
+	.pwrdm_read_prev_pwrst	= omap4_pwrdm_read_prev_pwrst,
+	.pwrdm_set_lowpwrstchange	= omap4_pwrdm_set_lowpwrstchange,
+	.pwrdm_clear_all_prev_pwrst	= omap4_pwrdm_clear_all_prev_pwrst,
+	.pwrdm_set_logic_retst	= omap4_pwrdm_set_logic_retst,
+	.pwrdm_read_logic_pwrst	= omap4_pwrdm_read_logic_pwrst,
+	.pwrdm_read_prev_logic_pwrst	= omap4_pwrdm_read_prev_logic_pwrst,
+	.pwrdm_read_logic_retst	= omap4_pwrdm_read_logic_retst,
+	.pwrdm_read_mem_pwrst	= omap4_pwrdm_read_mem_pwrst,
+	.pwrdm_read_mem_retst	= omap4_pwrdm_read_mem_retst,
+	.pwrdm_read_prev_mem_pwrst	= omap4_pwrdm_read_prev_mem_pwrst,
+	.pwrdm_set_mem_onst	= omap4_pwrdm_set_mem_onst,
+	.pwrdm_set_mem_retst	= omap4_pwrdm_set_mem_retst,
+	.pwrdm_wait_transition	= omap4_pwrdm_wait_transition,
+};
+
+/*
+ * XXX document
+ */
+static struct prm_ll_data omap44xx_prm_ll_data = {
+	.read_reset_sources = &omap44xx_prm_read_reset_sources,
+};
+
+static int __init omap44xx_prm_init(void)
+{
+	int ret;
+
+	if (!cpu_is_omap44xx())
+		return 0;
+
+	ret = prm_register(&omap44xx_prm_ll_data);
+	if (ret)
+		return ret;
+
+	omap44xx_prm_enable_io_wakeup();
+
+	return omap_prcm_register_chain_handler(&omap4_prcm_irq_setup);
+}
+subsys_initcall(omap44xx_prm_init);
+
+static void __exit omap44xx_prm_exit(void)
+{
+	if (!cpu_is_omap44xx())
+		return;
+
+	/* Should never happen */
+	WARN(prm_unregister(&omap44xx_prm_ll_data),
+	     "%s: prm_ll_data function pointer mismatch\n", __func__);
+}
+__exitcall(omap44xx_prm_exit);

arch/arm/mach-omap2/prm44xx.h

@@ -771,6 +771,8 @@ extern void omap44xx_prm_ocp_barrier(void);
 extern void omap44xx_prm_save_and_clear_irqen(u32 *saved_mask);
 extern void omap44xx_prm_restore_irqen(u32 *saved_mask);
 
+extern u32 omap44xx_prm_get_reset_sources(void);
+
 # endif
 
 #endif