From e10c52e7e064038d9bd67b20bf4ce92077d7d84e Mon Sep 17 00:00:00 2001 From: Jan Kiszka Date: Tue, 15 Oct 2024 15:04:44 +0800 Subject: [PATCH] phy: starfive: jh7110-usb: Fix link configuration to controller In order to connect the USB 2.0 PHY to its controller, we also need to set "u0_pdrstn_split_sw_usbpipe_plugen" [1]. Some downstream U-Boot versions did that, but upstream firmware does not, and the kernel must not rely on such behavior anyway. Failing to set this left the USB gadget port invisible to connected hosts behind. Link: https://doc-en.rvspace.org/JH7110/TRM/JH7110_TRM/sys_syscon.html#sys_syscon__section_b3l_fqs_wsb [1] Fixes: 16d3a71c20cf ("phy: starfive: Add JH7110 USB 2.0 PHY driver") Signed-off-by: Jan Kiszka Signed-off-by: Minda Chen Reviewed-by: Conor Dooley Link: https://lore.kernel.org/r/20241015070444.20972-2-minda.chen@starfivetech.com Signed-off-by: Vinod Koul --- drivers/phy/starfive/phy-jh7110-usb.c | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) diff --git a/drivers/phy/starfive/phy-jh7110-usb.c b/drivers/phy/starfive/phy-jh7110-usb.c index 633912f8a05d..cb5454fbe2c8 100644 --- a/drivers/phy/starfive/phy-jh7110-usb.c +++ b/drivers/phy/starfive/phy-jh7110-usb.c @@ -10,18 +10,24 @@ #include #include #include +#include #include #include #include +#include #include #define USB_125M_CLK_RATE 125000000 #define USB_LS_KEEPALIVE_OFF 0x4 #define USB_LS_KEEPALIVE_ENABLE BIT(4) +#define USB_PDRSTN_SPLIT BIT(17) +#define SYSCON_USB_SPLIT_OFFSET 0x18 + struct jh7110_usb2_phy { struct phy *phy; void __iomem *regs; + struct regmap *sys_syscon; struct clk *usb_125m_clk; struct clk *app_125m; enum phy_mode mode; @@ -61,6 +67,10 @@ static int usb2_phy_set_mode(struct phy *_phy, usb2_set_ls_keepalive(phy, (mode != PHY_MODE_USB_DEVICE)); } + /* Connect usb 2.0 phy mode */ + regmap_update_bits(phy->sys_syscon, SYSCON_USB_SPLIT_OFFSET, + USB_PDRSTN_SPLIT, USB_PDRSTN_SPLIT); + return 0; } @@ -129,6 +139,12 @@ static int jh7110_usb_phy_probe(struct platform_device *pdev) phy_set_drvdata(phy->phy, phy); phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); + phy->sys_syscon = + syscon_regmap_lookup_by_compatible("starfive,jh7110-sys-syscon"); + if (IS_ERR(phy->sys_syscon)) + return dev_err_probe(dev, PTR_ERR(phy->sys_syscon), + "Failed to get sys-syscon\n"); + return PTR_ERR_OR_ZERO(phy_provider); }