dt-binding: phy: convert ti,omap-usb2 to YAML

Move ti,omap-usb2 to its own YAML schema.

Signed-off-by: Roger Quadros <rogerq@ti.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20200831142130.21836-1-rogerq@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>

Documentation/devicetree/bindings/phy/ti,omap-usb2.yaml

@@ -0,0 +1,74 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/ti,omap-usb2.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: OMAP USB2 PHY
+
+maintainers:
+ - Kishon Vijay Abraham I <kishon@ti.com>
+ - Roger Quadros <rogerq@ti.com>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+        - enum:
+          - ti,dra7x-usb2
+          - ti,dra7x-usb2-phy2
+          - ti,am654-usb2
+        - enum:
+          - ti,omap-usb2
+      - items:
+        - const: ti,am437x-usb2
+      - items:
+        - const: ti,omap-usb2
+
+  reg:
+    maxItems: 1
+
+  "#phy-cells":
+    const: 0
+
+  clocks:
+    minItems: 1
+    items:
+      - description: wakeup clock
+      - description: reference clock
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: wkupclk
+      - const: refclk
+
+  syscon-phy-power:
+    $ref: /schemas/types.yaml#definitions/phandle-array
+    description:
+      phandle/offset pair. Phandle to the system control module and
+      register offset to power on/off the PHY.
+
+  ctrl-module:
+    $ref: /schemas/types.yaml#definitions/phandle
+    description:
+      (deprecated) phandle of the control module used by PHY driver
+      to power on the PHY. Use syscon-phy-power instead.
+
+required:
+  - compatible
+  - reg
+  - "#phy-cells"
+  - clocks
+  - clock-names
+
+examples:
+  - |
+    usb0_phy: phy@4100000 {
+      compatible = "ti,am654-usb2", "ti,omap-usb2";
+      reg = <0x4100000 0x54>;
+      syscon-phy-power = <&scm_conf 0x4000>;
+      clocks = <&k3_clks 151 0>, <&k3_clks 151 1>;
+      clock-names = "wkupclk", "refclk";
+      #phy-cells = <0>;
+    };

Documentation/devicetree/bindings/phy/ti-phy.txt

@@ -27,43 +27,6 @@ omap_control_usb: omap-control-usb@4a002300 {
         reg-names = "otghs_control";
 };
 
-OMAP USB2 PHY
-
-Required properties:
- - compatible: Should be "ti,omap-usb2"
-	       Should be "ti,dra7x-usb2" for the 1st instance of USB2 PHY on
-	       DRA7x
-	       Should be "ti,dra7x-usb2-phy2" for the 2nd instance of USB2 PHY
-	       in DRA7x
-	       Should be "ti,am654-usb2" for the USB2 PHYs on AM654.
- - reg : Address and length of the register set for the device.
- - #phy-cells: determine the number of cells that should be given in the
-   phandle while referencing this phy.
- - clocks: a list of phandles and clock-specifier pairs, one for each entry in
-   clock-names.
- - clock-names: should include:
-   * "wkupclk" - wakeup clock.
-   * "refclk" - reference clock (optional).
-
-Deprecated properties:
- - ctrl-module : phandle of the control module used by PHY driver to power on
-   the PHY.
-
-Recommended properies:
-- syscon-phy-power : phandle/offset pair. Phandle to the system control
-  module and the register offset to power on/off the PHY.
-
-This is usually a subnode of ocp2scp to which it is connected.
-
-usb2phy@4a0ad080 {
-	compatible = "ti,omap-usb2";
-	reg = <0x4a0ad080 0x58>;
-	ctrl-module = <&omap_control_usb>;
-	#phy-cells = <0>;
-	clocks = <&usb_phy_cm_clk32k>, <&usb_otg_ss_refclk960m>;
-	clock-names = "wkupclk", "refclk";
-};
-
 TI PIPE3 PHY
 
 Required properties: