diff --git a/Documentation/hwmon/index.rst b/Documentation/hwmon/index.rst index 6e7b8726b60c..7424cbf36ae1 100644 --- a/Documentation/hwmon/index.rst +++ b/Documentation/hwmon/index.rst @@ -166,6 +166,7 @@ Hardware Monitoring Kernel Drivers mp2856 mp2888 mp2975 + mp2993 mp5023 mp5990 mpq8785 diff --git a/Documentation/hwmon/mp2993.rst b/Documentation/hwmon/mp2993.rst new file mode 100644 index 000000000000..7a4fe0d946e0 --- /dev/null +++ b/Documentation/hwmon/mp2993.rst @@ -0,0 +1,150 @@ +.. SPDX-License-Identifier: GPL-2.0 + +Kernel driver mp2993 +==================== + +Supported chips: + + * MPS mp2993 + + Prefix: 'mp2993' + + * Datasheet + https://scnbwymvp-my.sharepoint.com/:f:/g/personal/admin_scnbwy_com/Eth4kX1_J1hMsaASHiOYL4QBHU5a75r-tRfLKbHnJFdKLQ?e=vxj3DF + +Author: + + Noah Wang + +Description +----------- + +This driver implements support for Monolithic Power Systems, Inc. (MPS) +MP2993 Dual Loop Digital Multi-phase Controller. + +Device compliant with: + +- PMBus rev 1.3 interface. + +The driver exports the following attributes via the 'sysfs' files +for input voltage: + +**in1_input** + +**in1_label** + +**in1_crit** + +**in1_crit_alarm** + +**in1_lcrit** + +**in1_lcrit_alarm** + +**in1_max** + +**in1_max_alarm** + +**in1_min** + +**in1_min_alarm** + +The driver provides the following attributes for output voltage: + +**in2_input** + +**in2_label** + +**in2_crit** + +**in2_crit_alarm** + +**in2_lcrit** + +**in2_lcrit_alarm** + +**in3_input** + +**in3_label** + +**in3_crit** + +**in3_crit_alarm** + +**in3_lcrit** + +**in3_lcrit_alarm** + +The driver provides the following attributes for input current: + +**curr1_input** + +**curr1_label** + +**curr1_max** + +**curr1_max_alarm** + +The driver provides the following attributes for output current: + +**curr2_input** + +**curr2_label** + +**curr2_crit** + +**curr2_crit_alarm** + +**curr2_max** + +**curr2_max_alarm** + +**curr3_input** + +**curr3_label** + +**curr3_crit** + +**curr3_crit_alarm** + +**curr3_max** + +**curr3_max_alarm** + +The driver provides the following attributes for input power: + +**power1_input** + +**power1_label** + +The driver provides the following attributes for output power: + +**power2_input** + +**power2_label** + +**power3_input** + +**power3_label** + +The driver provides the following attributes for temperature: + +**temp1_input** + +**temp1_crit** + +**temp1_crit_alarm** + +**temp1_max** + +**temp1_max_alarm** + +**temp2_input** + +**temp2_crit** + +**temp2_crit_alarm** + +**temp2_max** + +**temp2_max_alarm** diff --git a/MAINTAINERS b/MAINTAINERS index d6c90161c7bf..a1e2f387b706 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -15258,6 +15258,13 @@ S: Maintained F: Documentation/devicetree/bindings/leds/backlight/mps,mp3309c.yaml F: drivers/video/backlight/mp3309c.c +MPS MP2993 DRIVER +M: Noah Wang +L: linux-hwmon@vger.kernel.org +S: Maintained +F: Documentation/hwmon/mp2993.rst +F: drivers/hwmon/pmbus/mp2993.c + MR800 AVERMEDIA USB FM RADIO DRIVER M: Alexey Klimov L: linux-media@vger.kernel.org diff --git a/drivers/hwmon/pmbus/Kconfig b/drivers/hwmon/pmbus/Kconfig index 08e82c457356..d875d31ce84c 100644 --- a/drivers/hwmon/pmbus/Kconfig +++ b/drivers/hwmon/pmbus/Kconfig @@ -346,6 +346,15 @@ config SENSORS_MP2975 This driver can also be built as a module. If so, the module will be called mp2975. +config SENSORS_MP2993 + tristate "MPS MP2993" + help + If you say yes here you get hardware monitoring support for MPS + MP2993 Dual Loop Digital Multi-Phase Controller. + + This driver can also be built as a module. If so, the module will + be called mp2993. + config SENSORS_MP2975_REGULATOR depends on SENSORS_MP2975 && REGULATOR bool "Regulator support for MPS MP2975" diff --git a/drivers/hwmon/pmbus/Makefile b/drivers/hwmon/pmbus/Makefile index 2279b3327bbf..312d3f0c0540 100644 --- a/drivers/hwmon/pmbus/Makefile +++ b/drivers/hwmon/pmbus/Makefile @@ -37,6 +37,7 @@ obj-$(CONFIG_SENSORS_MAX8688) += max8688.o obj-$(CONFIG_SENSORS_MP2856) += mp2856.o obj-$(CONFIG_SENSORS_MP2888) += mp2888.o obj-$(CONFIG_SENSORS_MP2975) += mp2975.o +obj-$(CONFIG_SENSORS_MP2993) += mp2993.o obj-$(CONFIG_SENSORS_MP5023) += mp5023.o obj-$(CONFIG_SENSORS_MP5990) += mp5990.o obj-$(CONFIG_SENSORS_MPQ7932) += mpq7932.o diff --git a/drivers/hwmon/pmbus/mp2993.c b/drivers/hwmon/pmbus/mp2993.c new file mode 100644 index 000000000000..944593e13231 --- /dev/null +++ b/drivers/hwmon/pmbus/mp2993.c @@ -0,0 +1,261 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Hardware monitoring driver for MPS Multi-phase Digital VR Controllers(MP2993) + */ + +#include +#include +#include +#include "pmbus.h" + +#define MP2993_VOUT_OVUV_UINT 125 +#define MP2993_VOUT_OVUV_DIV 64 +#define MP2993_VIN_LIMIT_UINT 1 +#define MP2993_VIN_LIMIT_DIV 8 +#define MP2993_READ_VIN_UINT 1 +#define MP2993_READ_VIN_DIV 32 + +#define MP2993_PAGE_NUM 2 + +#define MP2993_RAIL1_FUNC (PMBUS_HAVE_VIN | PMBUS_HAVE_VOUT | \ + PMBUS_HAVE_IOUT | PMBUS_HAVE_POUT | \ + PMBUS_HAVE_TEMP | PMBUS_HAVE_PIN | \ + PMBUS_HAVE_IIN | \ + PMBUS_HAVE_STATUS_VOUT | \ + PMBUS_HAVE_STATUS_IOUT | \ + PMBUS_HAVE_STATUS_TEMP | \ + PMBUS_HAVE_STATUS_INPUT) + +#define MP2993_RAIL2_FUNC (PMBUS_HAVE_VOUT | PMBUS_HAVE_IOUT | \ + PMBUS_HAVE_POUT | PMBUS_HAVE_TEMP | \ + PMBUS_HAVE_STATUS_VOUT | \ + PMBUS_HAVE_STATUS_IOUT | \ + PMBUS_HAVE_STATUS_TEMP | \ + PMBUS_HAVE_STATUS_INPUT) + +/* Converts a linear11 data exponent to a specified value */ +static u16 mp2993_linear11_exponent_transfer(u16 word, u16 expect_exponent) +{ + s16 exponent, mantissa, target_exponent; + + exponent = ((s16)word) >> 11; + mantissa = ((s16)((word & 0x7ff) << 5)) >> 5; + target_exponent = (s16)((expect_exponent & 0x1f) << 11) >> 11; + + if (exponent > target_exponent) + mantissa = mantissa << (exponent - target_exponent); + else + mantissa = mantissa >> (target_exponent - exponent); + + return (mantissa & 0x7ff) | ((expect_exponent << 11) & 0xf800); +} + +static int +mp2993_set_vout_format(struct i2c_client *client, int page, int format) +{ + int ret; + + ret = i2c_smbus_write_byte_data(client, PMBUS_PAGE, page); + if (ret < 0) + return ret; + + return i2c_smbus_write_byte_data(client, PMBUS_VOUT_MODE, format); +} + +static int mp2993_identify(struct i2c_client *client, struct pmbus_driver_info *info) +{ + int ret; + + /* Set vout to direct format for rail1. */ + ret = mp2993_set_vout_format(client, 0, PB_VOUT_MODE_DIRECT); + if (ret < 0) + return ret; + + /* Set vout to direct format for rail2. */ + return mp2993_set_vout_format(client, 1, PB_VOUT_MODE_DIRECT); +} + +static int mp2993_read_word_data(struct i2c_client *client, int page, int phase, + int reg) +{ + int ret; + + switch (reg) { + case PMBUS_VOUT_OV_FAULT_LIMIT: + case PMBUS_VOUT_UV_FAULT_LIMIT: + ret = pmbus_read_word_data(client, page, phase, reg); + if (ret < 0) + return ret; + + ret = DIV_ROUND_CLOSEST(ret * MP2993_VOUT_OVUV_UINT, MP2993_VOUT_OVUV_DIV); + break; + case PMBUS_OT_FAULT_LIMIT: + case PMBUS_OT_WARN_LIMIT: + /* + * The MP2993 ot fault limit value and ot warn limit value + * per rail are always the same, so only PMBUS_OT_FAULT_LIMIT + * and PMBUS_OT_WARN_LIMIT register in page 0 are defined to + * indicates the limit value. + */ + ret = pmbus_read_word_data(client, 0, phase, reg); + break; + case PMBUS_READ_VIN: + /* The MP2993 vin scale is (1/32V)/Lsb */ + ret = pmbus_read_word_data(client, page, phase, reg); + if (ret < 0) + return ret; + + ret = DIV_ROUND_CLOSEST((ret & GENMASK(9, 0)) * MP2993_READ_VIN_UINT, + MP2993_READ_VIN_DIV); + break; + case PMBUS_VIN_OV_FAULT_LIMIT: + case PMBUS_VIN_OV_WARN_LIMIT: + case PMBUS_VIN_UV_WARN_LIMIT: + case PMBUS_VIN_UV_FAULT_LIMIT: + /* The MP2993 vin limit scale is (1/8V)/Lsb */ + ret = pmbus_read_word_data(client, page, phase, reg); + if (ret < 0) + return ret; + + ret = DIV_ROUND_CLOSEST((ret & GENMASK(7, 0)) * MP2993_VIN_LIMIT_UINT, + MP2993_VIN_LIMIT_DIV); + break; + case PMBUS_READ_IOUT: + case PMBUS_READ_IIN: + case PMBUS_IIN_OC_WARN_LIMIT: + case PMBUS_IOUT_OC_FAULT_LIMIT: + case PMBUS_IOUT_OC_WARN_LIMIT: + case PMBUS_READ_VOUT: + case PMBUS_READ_PIN: + case PMBUS_READ_POUT: + case PMBUS_READ_TEMPERATURE_1: + ret = -ENODATA; + break; + default: + ret = -EINVAL; + break; + } + + return ret; +} + +static int mp2993_write_word_data(struct i2c_client *client, int page, int reg, + u16 word) +{ + int ret; + + switch (reg) { + case PMBUS_VOUT_OV_FAULT_LIMIT: + case PMBUS_VOUT_UV_FAULT_LIMIT: + ret = DIV_ROUND_CLOSEST(word * MP2993_VOUT_OVUV_DIV, MP2993_VOUT_OVUV_UINT); + ret = pmbus_write_word_data(client, 0, reg, ret); + break; + case PMBUS_OT_FAULT_LIMIT: + case PMBUS_OT_WARN_LIMIT: + /* + * The MP2993 ot fault limit value and ot warn limit value + * per rail are always the same, so only PMBUS_OT_FAULT_LIMIT + * and PMBUS_OT_WARN_LIMIT register in page 0 are defined to + * config the ot limit value. + */ + ret = pmbus_write_word_data(client, 0, reg, word); + break; + case PMBUS_VIN_OV_FAULT_LIMIT: + case PMBUS_VIN_OV_WARN_LIMIT: + case PMBUS_VIN_UV_WARN_LIMIT: + case PMBUS_VIN_UV_FAULT_LIMIT: + /* The MP2993 vin limit scale is (1/8V)/Lsb */ + ret = pmbus_write_word_data(client, 0, reg, + DIV_ROUND_CLOSEST(word * MP2993_VIN_LIMIT_DIV, + MP2993_VIN_LIMIT_UINT)); + break; + case PMBUS_IIN_OC_WARN_LIMIT: + /* + * The PMBUS_IIN_OC_WARN_LIMIT of MP2993 is linear11 format, + * and the exponent is a constant value(5'b00000)， so the + * exponent of word parameter should be converted to 5'b00000. + */ + ret = pmbus_write_word_data(client, page, reg, + mp2993_linear11_exponent_transfer(word, 0x00)); + break; + // + case PMBUS_IOUT_OC_FAULT_LIMIT: + case PMBUS_IOUT_OC_WARN_LIMIT: + /* + * The PMBUS_IOUT_OC_FAULT_LIMIT and PMBUS_IOUT_OC_WARN_LIMIT + * of MP2993 can be regarded as linear11 format, and the + * exponent is a 5'b00001 or 5'b00000. To ensure a larger + * range of limit value, so the exponent of word parameter + * should be converted to 5'b00001. + */ + ret = pmbus_write_word_data(client, page, reg, + mp2993_linear11_exponent_transfer(word, 0x01)); + break; + default: + ret = -EINVAL; + break; + } + + return ret; +} + +static struct pmbus_driver_info mp2993_info = { + .pages = MP2993_PAGE_NUM, + .format[PSC_VOLTAGE_IN] = direct, + .format[PSC_CURRENT_IN] = linear, + .format[PSC_CURRENT_OUT] = linear, + .format[PSC_TEMPERATURE] = direct, + .format[PSC_POWER] = linear, + .format[PSC_VOLTAGE_OUT] = direct, + + .m[PSC_VOLTAGE_OUT] = 1, + .R[PSC_VOLTAGE_OUT] = 3, + .b[PSC_VOLTAGE_OUT] = 0, + + .m[PSC_VOLTAGE_IN] = 1, + .R[PSC_VOLTAGE_IN] = 0, + .b[PSC_VOLTAGE_IN] = 0, + + .m[PSC_TEMPERATURE] = 1, + .R[PSC_TEMPERATURE] = 0, + .b[PSC_TEMPERATURE] = 0, + + .func[0] = MP2993_RAIL1_FUNC, + .func[1] = MP2993_RAIL2_FUNC, + .read_word_data = mp2993_read_word_data, + .write_word_data = mp2993_write_word_data, + .identify = mp2993_identify, +}; + +static int mp2993_probe(struct i2c_client *client) +{ + return pmbus_do_probe(client, &mp2993_info); +} + +static const struct i2c_device_id mp2993_id[] = { + {"mp2993", 0}, + {} +}; +MODULE_DEVICE_TABLE(i2c, mp2993_id); + +static const struct of_device_id __maybe_unused mp2993_of_match[] = { + {.compatible = "mps,mp2993"}, + {} +}; +MODULE_DEVICE_TABLE(of, mp2993_of_match); + +static struct i2c_driver mp2993_driver = { + .driver = { + .name = "mp2993", + .of_match_table = mp2993_of_match, + }, + .probe = mp2993_probe, + .id_table = mp2993_id, +}; + +module_i2c_driver(mp2993_driver); + +MODULE_AUTHOR("Noah Wang "); +MODULE_DESCRIPTION("PMBus driver for MPS MP2993"); +MODULE_LICENSE("GPL"); +MODULE_IMPORT_NS(PMBUS);