In the case of a prepare callback after an xrun or when the PCM is
restarted after a call to snd_pcm_drain/snd_pcm_drop, avoid
reprogramming the SHIM registers but send the PDI stream number so that
the link DMA data can be set. This is needed for the case that the DMA
data is cleared when the PCM is stopped and restarted without being
closed.
Link: https://github.com/thesofproject/sof/issues/9502
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Acked-by: Vinod Koul <vkoul@kernel.org>
All: stable@vger.kernel.org # 6.10.x 6.11.x
Link: https://patch.msgid.link/20241016032910.14601-4-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The HDaudio mlink support makes it more logical to couple interrupt
enabling/disabling with power-up/down sequences.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Acked-by: Vinod Koul <vkoul@kernel.org>
Link: https://patch.msgid.link/20241007121241.30914-3-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In older platforms, the number of links was constant and hard-coded to
4. Newer platforms can have varying number of links, so we need to add
a probe-time check to make sure the ACPI-reported information with
_DSD properties is aligned with hardware capabilities reported in the
SoundWire LCAP register.
Acked-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Acked-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240819005548.5867-3-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
For some reason a number of files included the "All rights reserved"
statement. Good old copy-paste made sure this mistake proliferated.
Remove the "All rights reserved" in all Intel-copyright to align with
internal guidance.
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20240617121318.14037-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The ACE3 IP used in PantherLake exposes new bitfields in the ACTMCTL
register to better control clocks/delays. These bitfields were
reserved/zero in the ACE2.x IP, to simplify the integration the new
bifields are added unconditionally. The behavior will only be impacted
when the firmware exposes DSD properties to set non-zero values.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20240603070240.5165-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Starting with LNL, the recommendation is to use settings read from DSD
properties instead of hard-coding the values.
The DOAIS and DODS values are completely-specific to Intel and are
stored in a vendor-specific property structure.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20240429004321.2399754-3-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Use two variables to save the settings, in preparation of a follow-up
change to read values from _DSD properties.
Starting with this patch, the bitfields will be reordered and listed
MSB-first, as shown in the hardware documentation.
Also note that the default for DOAIS is changed from 0x1 (copy-pasted
value?) to 0x3 (hardware default).
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20240429004321.2399754-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Since LunarLake, we use the HDadio WAKEEN/WAKESTS to detect wakes for
SoundWire codecs. This patch follows the HDaudio example and
simplifies the behavior on wake-up by unconditionally waking up all
links.
This behavior makes a lot of sense when removing the jack, which may
signal that the user wants to start rendering audio using the local
amplifiers. Resuming all links helps make sure the amplifiers are
ready to be used. Worst case, the pm_runtime suspend would kick-in
after several seconds of inactivity.
Closes: https://github.com/thesofproject/linux/issues/4687
Co-developed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Keqiao Zhang <keqiao.zhang@intel.com>
Link: https://lore.kernel.org/r/20240426064030.2305343-3-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The initial programming sequence only worked in the case where the
OFLEN bit is set, i.e. the DSP handles the SoundWire interface. In the
Linux integration, the interface is owned by the host. This disconnect
leads to wake-ups being routed to the DSP and not to the host.
The suggested update is to rely on the global HDAudio WAKEEN/STATESTS
registers, with the SDI bits used to program the wakeups and check the
status.
Note that there is no way to know which peripheral generated a
wake-up. When the hardware detects a change, it sets all the bits
corresponding to LSDIIDx. The LSDIIDx information can be used to
figure out on which link the wakeup happened, but for further details
the software will have to check the status of each peripheral.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20240426064030.2305343-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Starting with Lunar Lake, the notion of ALH is mostly irrelevant,
since the HDaudio DMAs are used. However the firmware still relies on
an 'ALH gateway' with a 'node_id' based on the same formula.
This patch in isolation has no functional impact, it's only when the
ASoC parts use it that we will see a changed behavior.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20240408062206.421326-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Insert clock setup after power-up and before setting up the SYNCPRD,
per hardware recommendations.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20240326092030.1062802-8-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The existing sequence is fine if we want to only use the xtal
clock. However if we want to select the clock, we first need to
power-up, then select the clock and last set the SYNCPRD.
This patch first modifies the order, we will add the clock selection
as a follow-up.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20240326092030.1062802-7-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The input clock to the SoundWire IP can be
38.4 MHz (xtal clock source)
24.576 MHz (audio cardinal clock)
96 MHz (internal Audio PLL)
This patch moves the clock selection outside the mutex and add the new
choices for 24.576 and 96 MHz, but doesn't add any functionality.
Follow-up patches will add support for clock selection.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20240326092030.1062802-6-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Start from ACE1.x, DOAISE is added to AC timing control
register bit 5, it combines with DOAIS to get effective
timing, and has the default value 1.
The current code fills DOAIS, DACTQE and DODS bits to a
variable initialized to zero, and updates the variable
to AC timing control register. With this operation, We
change DOAISE to 0, and force a much more aggressive
timing. The timing is even unable to form a working
waveform on SDA pin.
This patch uses read-modify-write operation for the AC
timing control register access, thus makes sure those
bits not supposed and intended to change are not touched.
Signed-off-by: Chao Song <chao.song@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20231127124735.2080562-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
ASoC is now unified asoc_xxx() into snd_soc_xxx().
This patch convert asoc_xxx() to snd_soc_xxx().
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/874jk0qnga.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The code is fork-lifted from intel.c and is mostly similar *except*
for the SHIM configuration which cannot be done here with the
introduction of HDAudio Extended links. The ACE2.x SOF side also
requires the hw_free and trigger callbacks to be implemented for
HDaudio DMA management
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230802061947.3788679-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add the abstraction needed to only program the LSDIID registers for
the HDaudio extended links. It's perfectly fine to program this
register multiple times in case devices lose sync and reattach.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230515071042.2038-21-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
This is the last callback needed for all bus management routines on
new hardware. Same concept as before, just different register.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230515071042.2038-19-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The WAKEEN and WAKESTS registers were moved to the per-link SHIM_VS
area.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230515071042.2038-18-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The sequences are so far identical, so the abstraction is a bit
over-engineered. In time we will simplify if there is no need to
special case or work-around programming sequences.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230515071042.2038-17-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Same functionality as before, but with the registers moved to the
HDaudio multi-link area.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230515071042.2038-16-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The code is similar to the previous implementation, the only
difference is that the PDI descriptors are now in different areas.
Using common helpers proves tricky with multiple changed registers,
workarounds that are no longer necessary. It's simpler to duplicate
the intel_register_dai() function rather than try to add multiple
levels of abstraction and indirections.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230515071042.2038-15-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Unlike previous hardware generations, the glue-to-master transition is
not managed by software, instead the transitions are managed as part
of the power-up/down sequences controlled by SPA/CPA bits.
The only thing that's required is to configure the link PHY for
'normal' operation instead of the PHY test mode.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230515071042.2038-14-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The registers used for multi-link synchronization are no longer in the
SHIM but in the HDaudio multi-link capability space. Use helpers to
configure the SYNCPRD value, and wait for SYNCPU to change after
powering-up.
Note that the SYNCPRD value is shared between all sublinks, for
obvious reasons if those links are supposed to be synchronized. The
value of SYNCPRD is programmed only once for all sublinks.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230515071042.2038-13-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
only power-up/down for now, the frequency is not set.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230515071042.2038-12-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The register map and programming sequences for the ACE2.x IP are
completely different and need to be abstracted with a different set of
callbacks.
This initial patch adds a new file, follow-up patches will add each
required callback.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230515071042.2038-4-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
