In an upcoming patch bch2_backpointer_get_key() will be repairing when
it finds a dangling backpointer; it will need to flush the btree write
buffer before it can definitively say there's an error.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
bch_backpointer no longer contains the bucket_offset field, it's just a
direct LBA mapping (with low bits to account for compressed extent
splitting), so we don't need to refer to the device to construct it
anymore.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
New on disk format version: backpointers new include the generation
number of the bucket they refer to, and the obsolete bucket_offset field
(no longer needed because we no longer store backpointers in alloc keys)
is gone.
This is an expensive forced upgrade - hopefully the last; we have to run
the extents_to_backpointers recovery pass to regenerate backpointers.
It's a forced incompatible upgrade because the alternative would've been
permamently making backpointers bigger, and as one of the biggest btrees
(along with the extents btree) that's not an ideal option.
It's worth it though, because this allows us to make the
check_extents_to_backpointers pass drastically cheaper: an upcoming
patch changes it to sum up backpointers in a bucket and check the sum
against the sector counts for that bucket, only looking for missing
backpointers if they don't match (and then only for specific buckets).
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Add a new parameter to bkey validate functions, and use it to improve
invalid bkey error messages: we can now print the btree and depth it
came from, or if it came from the journal, or is a btree root.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
bch_backpointer.bucket_offset is going away - it's no longer needed
since we no longer store backpointers in alloc keys, the same
information is in the key position itself.
And we'll be reclaiming the space in bch_backpointer for the bucket
generation number.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Since we no longer store backpointers in alloc keys, there's no reason
not to pass around bkey_i_backpointers; this means we don't have to pass
the bucket pos separately.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
_noerror means don't produce inconsistent errors, so it should be using
bch2_dev_rcu_noerror().
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Since for quite some time backpointers have only been stored in the
backpointers btree, not alloc keys (an aborted experiment, support for
which has been removed) - we can replace get_next_backpointer() with
simple btree iteration.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
bkey_fsck_err() was added as an interface that looks like fsck_err(),
but previously all it did was ensure that the appropriate error counter
was incremented in the superblock.
This is a cleanup and bugfix patch that converts it to a wrapper around
fsck_err(). This is needed to fix an issue with the upgrade path to
disk_accounting_v3, where the "silent fix" error list now includes
bkey_fsck errors; fsck_err() handles this in a unified way, and since we
need to change printing of bkey fsck errors from the caller to the inner
bkey_fsck_err() calls, this ends up being a pretty big change.
Als,, rename .invalid() methods to .validate(), for clarity, while we're
changing the function signature anyways (to drop the printbuf argument).
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
We're about to start using bch_validate_flags for superblock section
validation - it's no longer bkey specific.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Remove some duplication, and inconsistency between check_fix_ptrs and
the main ptr marking paths
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
bcachefs btree nodes are big - typically 256k - and btree roots are
pinned in memory. As we're now up to 18 btrees, we now have significant
memory overhead in mostly empty btree roots.
And in the future we're going to start enforcing that certain btree node
boundaries exist, to solve lock contention issues - analagous to XFS's
AGIs.
Thus, we need to start allocating smaller btree node buffers when we
can. This patch changes code that refers to the filesystem constant
c->opts.btree_node_size to refer to the btree node buffer size -
btree_buf_bytes() - where appropriate.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
The bucket_offset field of bch_backpointer is a 40-bit bitfield, but the
bch2_backpointer_swab() helper uses swab32. This leads to inconsistency
when an on-disk fs is accessed from an opposite endian machine.
As it turns out, we already have an internal swab40() helper that is
used from the bch_alloc_v4 swab callback. Lift it into the backpointers
header file and use it consistently in both places.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This patch adds a superblock error counter for every distinct fsck
error; this means that when analyzing filesystems out in the wild we'll
be able to see what sorts of inconsistencies are being found and repair,
and hence what bugs to look for.
Errors validating bkeys are not yet considered distinct fsck errors, but
this patch adds a new helper, bkey_fsck_err(), in order to add distinct
error types for them as well.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
As part of the forward compatibility patch series, we need to allow for
new key types without complaining loudly when running an old version.
This patch changes the flags parameter of bkey_invalid to an enum, and
adds a new flag to indicate we're being called from the transaction
commit path.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This adds a new field to bkey_ops for the minimum size of the value,
which standardizes that check and also enforces the new rule (previously
done somewhat ad-hoc) that we can extend value types by adding new
fields on to the end.
To make that work we do _not_ initialize min_val_size with sizeof,
instead we initialize it to the size of the first version of those
values.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
We don't store backpointers in alloc keys anymore, since we gained the
btree write buffer.
This patch drops support for backpointers in alloc keys, and revs the on
disk format version so that we know a fsck is required.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This adds a flags param to bch2_backpointer_get_key() so that we can
pass BTREE_ITER_INTENT, since ec_stripe_update_extent() is updating the
extent immediately.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
We now print the pos where the backpointer was found in the btree, as
well as the exact bucket:bucket_offset of the data, to aid in grepping
through logs.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Currently, we don't use bucket data type for tracking whether buckets
are part of a stripe; parity buckets are BCH_DATA_parity, but data
buckets in a stripe are BCH_DATA_user. There's a separate counter,
buckets_ec, outside the BCH_DATA_TYPES system for tracking number of
buckets on a device that are part of a stripe.
The trouble with this approach is that it's too coarse grained, and we
need better information on fragmentation for debugging copygc.
With this patch, data buckets in a stripe are now tracked as
BCH_DATA_stripe buckets.
This doesn't yet differentiate between erasure coded and non-erasure
coded data in a stripe bucket, nor do we yet track empty data buckets in
stripes.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
The btree key cache mainly helps with lock contention, at the cost of
additional memory overhead. During some fsck passes the memory overhead
really matters, but fsck is single threaded so lock contention is an
issue - so skipping the key cache during fsck will help with
performance.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This patch adds backpointers: we now have a reverse index from device
and offset on that device (specifically, offset within a bucket) back to
btree nodes and (non cached) data extents.
The first 40 backpointers within a bucket are stored in the alloc key;
after that backpointers spill over to the next backpointers btree. This
is to help avoid performance regressions from additional btree updates
on large streaming workloads.
This patch adds all the code for creating, checking and repairing
backpointers. The next patch in the series is going to use backpointers
for copygc - finally getting rid of the need to scan all extents to do
copygc.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
