mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git
synced 2024-12-29 17:22:07 +00:00
master
70874 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Leonard Göhrs
|
08d312c944 |
ARM: dts: stm32: lxa-tac: Add support for generation 3 devices
Add support for the lxa-tac generation 3 board based on the STM32MP153c. Signed-off-by: Leonard Göhrs <l.goehrs@pengutronix.de> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com> |
||
|
Leonard Göhrs
|
b4f063ba74 |
ARM: dts: stm32: lxa-tac: move adc and gpio{e,g} to gen{1,2} boards
This is a preparation patch in order to add lxa-tac generation 3
board.
As the gen3 board has a different adc and gpio{e,g} setups, move these
from the stm32mp15xc-lxa-tac.dtsi to the gen{1,2}.dts files.
Signed-off-by: Leonard Göhrs <l.goehrs@pengutronix.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
|
||
|
Leonard Göhrs
|
0407c432ae |
ARM: dts: stm32: lxa-tac: adjust USB gadget fifo sizes for multi function
Allow providing the Ethernet and mass storage functions on the USB peripheral port at the same time. Signed-off-by: Leonard Göhrs <l.goehrs@pengutronix.de> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com> |
||
|
Leonard Göhrs
|
4f1d50488f |
ARM: dts: stm32: lxa-tac: extend the alias table
Some of the userspace software and tests depend on the can/i2c/spi devices having the same name on every boot. This may not always be the case based on e.g. parallel probe order. Assign static device numbers to all can/i2c/spi devices. Signed-off-by: Leonard Göhrs <l.goehrs@pengutronix.de> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com> |
||
|
Leonard Göhrs
|
2cb11e2282 |
ARM: dts: stm32: lxa-tac: disable the real time clock
The RTC was enabled under the false assumption that the SoM already contains a suitable 32.768 kHz crystal. It does however not contain such a crystal and since none is fitted externally to the SoM the RTC can not be used on the hardware. Reflect that in the devicetree. Signed-off-by: Leonard Göhrs <l.goehrs@pengutronix.de> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com> |
||
|
Arnaud Pouliquen
|
4ea654242e |
ARM: dts: stm32: Fix IPCC EXTI declaration on stm32mp151
The GIC IRQ type used for IPCC RX should be IRQ_TYPE_LEVEL_HIGH.
Replacing the interrupt with the EXTI event changes the type to
the numeric value 1, meaning IRQ_TYPE_EDGE_RISING.
The issue is that EXTI event 61 is a direct event.The IRQ type of
direct events is not used by EXTI and is propagated to the parent
IRQ controller of EXTI, the GIC.
Align the IRQ type to the value expected by the GIC by replacing
the second parameter "1" with IRQ_TYPE_LEVEL_HIGH.
Fixes:
|
||
|
Marek Vasut
|
41e12cebd9 |
ARM: dts: stm32: Sort M24256E write-lockable page in DH STM32MP13xx DHCOR SoM DT
Move the M24256E write-lockable page subnode after RTC subnode in
DH STM32MP13xx DHCOR SoM DT to keep the list of nodes sorted by I2C
address. No functional change.
Fixes:
|
||
|
Marek Vasut
|
a4422a9183 |
ARM: dts: stm32: Increase CPU core voltage on STM32MP13xx DHCOR SoM
The STM32MP13xx DHCOR DHSBC is populated with STM32MP13xx part capable
of 1 GHz operation, increase the CPU core voltage to 1.35 V to make
sure the SoC is stable even if the blobs unconditionally force the CPU
to 1 GHz operation.
It is not possible to make use of CPUfreq on the STM32MP13xx because
the SCMI protocol 0x13 is not implemented by upstream OpTee-OS which
is the SCMI provider.
Fixes:
|
||
|
Marek Vasut
|
73317d3271 |
ARM: dts: stm32: Deduplicate serial aliases and chosen node for STM32MP15xx DHCOM SoM
Deduplicate /aliases { serialN = ... } and /chosen node into
stm32mp15xx-dhcom-som.dtsi , since the content is identical
on all carrier boards using the STM32MP15xx DHCOM SoM. No
functional change.
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Christoph Niedermaier <cniedermaier@dh-electronics.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
|
||
|
Shawn Guo
|
4b534cfc65 | Merge branch 'imx/defconfig' into for-next | ||
|
Shawn Guo
|
7597fa2369 | Merge branch 'imx/dt' into for-next | ||
|
Jesse Taube
|
5f12203006 |
ARM: dts: imxrt1050: Fix clocks for mmc
One of the usdhc1 controller's clocks should be IMXRT1050_CLK_AHB_PODF not
IMXRT1050_CLK_OSC.
Fixes:
|
||
|
Frederic Weisbecker
|
26e6057674 |
arm/bL_switcher: Use kthread_run_on_cpu()
Use the proper API instead of open coding it. Reviewed-by: Dave Martin <Dave.Martin@arm.com> Acked-by: Nicolas Pitre <nico@fluxnic.net> Signed-off-by: Frederic Weisbecker <frederic@kernel.org> |
||
|
Stefan Eichenberger
|
1ddb61a7c0 |
ARM: imx_v6_v7_defconfig: enable SND_SOC_SPDIF
Enable SND_SOC_SPDIF in imx_v6_v7_defconfig to support SPDIF audio.
With commit
|
||
|
Alexander Stein
|
c92fd19450 |
ARM: imx_v6_v7_defconfig: enable JC42 for TQMa7x
TQMa7x uses an JC42 compatible temperature sensor. Enable the corresponding driver. Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Reviewed-by: Markus Niebel <markus.niebel@ew.tq-group.com> Reviewed-by: Bruno Thomsen <bruno.thomsen@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org> |
||
|
Alexander Stein
|
d78a518e77 |
ARM: dts: imx7[d]-mba7: add Ethernet PHY IRQ support
The regulator-fec*-pwdn regulators were used to deassert the PWDN signal of ethernet PHY, e.g. not powering. This is not necessary as the line has a pull-up already. Instead of the combo pad of the PHY for IRQ support. Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Reviewed-by: Markus Niebel <markus.niebel@ew.tq-group.com> Reviewed-by: Bruno Thomsen <bruno.thomsen@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org> |
||
|
Alexander Stein
|
c0a0fdcd62 |
ARM: dts: imx7-mba7: Remove duplicated power supply
VCC3V3 is used twice, resulting in the debugfs warning: debugfs: Directory 'VCC3V3' with parent 'regulator' already present! The power supply provided by reg_vcc_3v3 is actually the same as reg_mba_3v3. Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Reviewed-by: Markus Niebel <markus.niebel@ew.tq-group.com> Reviewed-by: Bruno Thomsen <bruno.thomsen@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org> |
||
|
Alexander Stein
|
10a5e47ad4 |
ARM: dts: imx7-mba7: Fix SD card vmmc-supply
The SD card is directly supplied by VCC3V3. Remove superfluous regulator. Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Reviewed-by: Markus Niebel <markus.niebel@ew.tq-group.com> Reviewed-by: Bruno Thomsen <bruno.thomsen@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org> |
||
|
Alexander Stein
|
765d85db7e |
ARM: dts: imx7-mba7: Add 3.3V and 5.0V regulators
These voltages are provided unconditionally from external power supply and are input voltages to various dedicated, switchable, power rails. Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Reviewed-by: Markus Niebel <markus.niebel@ew.tq-group.com> Reviewed-by: Bruno Thomsen <bruno.thomsen@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org> |
||
|
Alexander Stein
|
78e08cebfe |
ARM: dts: imx7-tqma7: add missing vs-supply for LM75A (rev. 01xxx)
Add missing supply for LM75. Fixes the kernel warning:
lm75 0-0048: supply vs not found, using dummy regulator
Fixes:
|
||
|
Alexander Stein
|
24bd1c6c87 |
ARM: dts: imx7-tqma7: Remove superfluous status="okay" property
There is no need to specify status = "okay"; for newly created nodes, remove this property. Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Reviewed-by: Markus Niebel <markus.niebel@ew.tq-group.com> Reviewed-by: Bruno Thomsen <bruno.thomsen@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org> |
||
|
Alexander Stein
|
23d0d41176 |
ARM: dts: imx7-mba7: remove LVDS transmitter regulator
This regulator essentially controls the SHTDN# pin of the LVDS encoder. Remove it for proper usage with 'lvds-encoder' driver. Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Reviewed-by: Markus Niebel <markus.niebel@ew.tq-group.com> Reviewed-by: Bruno Thomsen <bruno.thomsen@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org> |
||
|
Geert Uytterhoeven
|
f70ec2ef27 |
ARM: dts: imx: Switch to {hp,mic}-det-gpios
Replace the deprecated "hp-det-gpio" and "mic-det-gpio" properties by "hp-det-gpios" resp. "mic-det-gpios" in Freescale Generic ASoC Sound Card device nodes. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Shawn Guo <shawnguo@kernel.org> |
||
|
Ryan Wanner
|
0d562f7497 |
ARM: at91: add new SoC sama7d65
Add new SoC from at91 family: sama7d65 Signed-off-by: Ryan Wanner <Ryan.Wanner@microchip.com> Reviewed-by: Claudiu Beznea <claudiu.beznea@tuxon.dev> Link: https://lore.kernel.org/r/465960c9240553753e96a7f4ff3f48879ade7558.1733505542.git.Ryan.Wanner@microchip.com [claudiu.beznea: use tabs instead of spaces] Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev> |
||
|
Ryan Wanner
|
221984dece |
ARM: configs: at91: sama7: add new SoC config
Add sama7d65 to the sama7_defconfig. Signed-off-by: Ryan Wanner <Ryan.Wanner@microchip.com> Signed-off-by: Varshini Rajendran <varshini.rajendran@microchip.com> Reviewed-by: Claudiu Beznea <claudiu.beznea@tuxon.dev> Link: https://lore.kernel.org/r/e5a1311100a4f05fdc44107e124129d2d93df2e0.1733505542.git.Ryan.Wanner@microchip.com Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev> |
||
|
Nicolas Ferre
|
6fc5bdfa87 |
ARM: at91: pm: change BU Power Switch to automatic mode
Change how the Backup Unit Power is configured and force the
automatic/hardware mode.
This change eliminates the need for software management of the power
switch, ensuring it transitions to the backup power source before
entering low power modes.
This is done in the only location where this switch was configured. It's
usually done in the bootloader.
Previously, the loss of the VDDANA (or VDDIN33) power source was not
automatically compensated by an alternative power source. This resulted
in the loss of Backup Unit content, including Backup Self-refresh low
power mode information, OTP emulation configuration, and boot
configuration, for instance.
Fixes:
|
||
|
Andreas Kemnade
|
f723f12dce |
ARM: dts: ti/omap: gta04: fix pm issues caused by spi module
Despite CM_IDLEST1_CORE and CM_FCLKEN1_CORE behaving normal,
disabling SPI leads to messages like when suspending:
Powerdomain (core_pwrdm) didn't enter target state 0
and according to /sys/kernel/debug/pm_debug/count off state is not
entered. That was not connected to SPI during the discussion
of disabling SPI. See:
https://lore.kernel.org/linux-omap/20230122100852.32ae082c@aktux/
The reason is that SPI is per default in slave mode. Linux driver
will turn it to master per default. It slave mode, the powerdomain seems to
be kept active if active chip select input is sensed.
Fix that by explicitly disabling the SPI3 pins which used to be muxed by
the bootloader since they are available on an optionally fitted header
which would require dtb overlays anyways.
Fixes:
|
||
|
Romain Naour
|
c1472ec1dc |
ARM: dts: dra7: Add bus_dma_limit for l4 cfg bus
A bus_dma_limit was added for l3 bus by commit |
||
|
Christophe JAILLET
|
19ee9e4cde |
ARM: OMAP2+: Fix a typo
A 'a' is missing in "powerdomin". Add it. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/ec20fd5c347bf74963532e95282f850d209d84d5.1730539664.git.christophe.jaillet@wanadoo.fr Signed-off-by: Kevin Hilman <khilman@baylibre.com> |
||
|
Mesih Kilinc
|
20296f8baa |
ARM: dts: suniv: f1c100s: Activate Audio Codec for Lichee Pi Nano
Allwinner suniv F1C100s now has basic audio codec support. Activate it for Lichee Pi Nano board. Signed-off-by: Mesih Kilinc <mesihkilinc@gmail.com> [ csokas.bence: Moved and fixed conflict ] Signed-off-by: Csókás, Bence <csokas.bence@prolan.hu> Link: https://patch.msgid.link/20241123123900.2656837-6-csokas.bence@prolan.hu Signed-off-by: Chen-Yu Tsai <wens@csie.org> |
||
|
Mesih Kilinc
|
95b570f7de |
ARM: dts: suniv: f1c100s: Add support for Audio Codec
Allwinner suniv F1C100s now has basic audio codec support. Enable it under device tree. Signed-off-by: Mesih Kilinc <mesihkilinc@gmail.com> [ csokas.bence: Rebased on current master ] Signed-off-by: Csókás, Bence <csokas.bence@prolan.hu> Link: https://patch.msgid.link/20241123123900.2656837-5-csokas.bence@prolan.hu Signed-off-by: Chen-Yu Tsai <wens@csie.org> |
||
|
Mesih Kilinc
|
7336701f64 |
ARM: dts: suniv: f1c100s: Add support for DMA
Allwinner suniv F1C100s now has DMA support. Enable it under device tree. Signed-off-by: Mesih Kilinc <mesihkilinc@gmail.com> [ csokas.bence: Rebased on current master ] Signed-off-by: Csókás, Bence <csokas.bence@prolan.hu> Link: https://patch.msgid.link/20241122161128.2619172-6-csokas.bence@prolan.hu Signed-off-by: Chen-Yu Tsai <wens@csie.org> |
||
|
Michal Pecio
|
cec785a7f2 |
ARM: tegra: nyan: Maintain power to USB ports on boot
USB ports are turned on by the firmware as it looks for disks to boot, ensure that they aren't power cycled before the xHCI driver comes up. This enables USB devices to be ready for use faster and reduces wear and risk of data loss on storage devices. A particularly annoying case was booting from a mechanical disk, which takes time to spin up again. Vendor kernel also kept these ports powered, and by the same means. Signed-off-by: Michal Pecio <michal.pecio@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com> |
||
|
Geert Uytterhoeven
|
62f95d8a49 |
ARM: dts: marvell: mmp2-olpc-xo-1-75: Switch to {hp,mic}-det-gpios
Replace the deprecated "hp-det-gpio" and "mic-det-gpio" properties by "hp-det-gpios" resp. "mic-det-gpios" in Audio Graph Card device nodes. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/7b4d7d735189fb346175a95e29db33f01c8cf93d.1727438777.git.geert+renesas@glider.be Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> |
||
|
Fabio Estevam
|
b77bd3ba76 |
ARM: imx: Re-introduce the PINCTRL selection
Since commit |
||
|
Eric Biggers
|
1684e82936 |
arm/crc-t10dif: expose CRC-T10DIF function through lib
Move the arm CRC-T10DIF assembly code into the lib directory and wire it up to the library interface. This allows it to be used without going through the crypto API. It remains usable via the crypto API too via the shash algorithms that use the library interface. Thus all the arch-specific "shash" code becomes unnecessary and is removed. Note: to see the diff from arch/arm/crypto/crct10dif-ce-glue.c to arch/arm/lib/crc-t10dif-glue.c, view this commit with 'git show -M10'. Reviewed-by: Ard Biesheuvel <ardb@kernel.org> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Link: https://lore.kernel.org/r/20241202012056.209768-6-ebiggers@kernel.org Signed-off-by: Eric Biggers <ebiggers@google.com> |
||
|
Eric Biggers
|
1e1b6dbc3d |
arm/crc32: expose CRC32 functions through lib
Move the arm CRC32 assembly code into the lib directory and wire it up to the library interface. This allows it to be used without going through the crypto API. It remains usable via the crypto API too via the shash algorithms that use the library interface. Thus all the arch-specific "shash" code becomes unnecessary and is removed. Note: to see the diff from arch/arm/crypto/crc32-ce-glue.c to arch/arm/lib/crc32-glue.c, view this commit with 'git show -M10'. Reviewed-by: Ard Biesheuvel <ardb@kernel.org> Link: https://lore.kernel.org/r/20241202010844.144356-6-ebiggers@kernel.org Signed-off-by: Eric Biggers <ebiggers@google.com> |
||
|
Linus Torvalds
|
e70140ba0d |
Get rid of 'remove_new' relic from platform driver struct
The continual trickle of small conversion patches is grating on me, and is really not helping. Just get rid of the 'remove_new' member function, which is just an alias for the plain 'remove', and had a comment to that effect: /* * .remove_new() is a relic from a prototype conversion of .remove(). * New drivers are supposed to implement .remove(). Once all drivers are * converted to not use .remove_new any more, it will be dropped. */ This was just a tree-wide 'sed' script that replaced '.remove_new' with '.remove', with some care taken to turn a subsequent tab into two tabs to make things line up. I did do some minimal manual whitespace adjustment for places that used spaces to line things up. Then I just removed the old (sic) .remove_new member function, and this is the end result. No more unnecessary conversion noise. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Linus Torvalds
|
6a34dfa15d |
Kbuild updates for v6.13
- Add generic support for built-in boot DTB files
- Enable TAB cycling for dialog buttons in nconfig
- Fix issues in streamline_config.pl
- Refactor Kconfig
- Add support for Clang's AutoFDO (Automatic Feedback-Directed
Optimization)
- Add support for Clang's Propeller, a profile-guided optimization.
- Change the working directory to the external module directory for M=
builds
- Support building external modules in a separate output directory
- Enable objtool for *.mod.o and additional kernel objects
- Use lz4 instead of deprecated lz4c
- Work around a performance issue with "git describe"
- Refactor modpost
-----BEGIN PGP SIGNATURE-----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=GDKD
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Add generic support for built-in boot DTB files
- Enable TAB cycling for dialog buttons in nconfig
- Fix issues in streamline_config.pl
- Refactor Kconfig
- Add support for Clang's AutoFDO (Automatic Feedback-Directed
Optimization)
- Add support for Clang's Propeller, a profile-guided optimization.
- Change the working directory to the external module directory for M=
builds
- Support building external modules in a separate output directory
- Enable objtool for *.mod.o and additional kernel objects
- Use lz4 instead of deprecated lz4c
- Work around a performance issue with "git describe"
- Refactor modpost
* tag 'kbuild-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (85 commits)
kbuild: rename .tmp_vmlinux.kallsyms0.syms to .tmp_vmlinux0.syms
gitignore: Don't ignore 'tags' directory
kbuild: add dependency from vmlinux to resolve_btfids
modpost: replace tdb_hash() with hash_str()
kbuild: deb-pkg: add python3:native to build dependency
genksyms: reduce indentation in export_symbol()
modpost: improve error messages in device_id_check()
modpost: rename alias symbol for MODULE_DEVICE_TABLE()
modpost: rename variables in handle_moddevtable()
modpost: move strstarts() to modpost.h
modpost: convert do_usb_table() to a generic handler
modpost: convert do_of_table() to a generic handler
modpost: convert do_pnp_device_entry() to a generic handler
modpost: convert do_pnp_card_entries() to a generic handler
modpost: call module_alias_printf() from all do_*_entry() functions
modpost: pass (struct module *) to do_*_entry() functions
modpost: remove DEF_FIELD_ADDR_VAR() macro
modpost: deduplicate MODULE_ALIAS() for all drivers
modpost: introduce module_alias_printf() helper
modpost: remove unnecessary check in do_acpi_entry()
...
|
||
|
Linus Torvalds
|
9d5daef3b3 |
ARM updates for 6.13-rc1
- add dev_is_amba() function to allow conversions during the next cycle - improve PREEMPT_RT performance with VFP - KASAN fixes for vmap stack -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEuNNh8scc2k/wOAE+9OeQG+StrGQFAmdI+gkACgkQ9OeQG+St rGSyrQ/+PxDrzd06IFsbICV5xrf3JJBQDdwbLzHhhMpRdg84/nxO60YyrbMqFO/H koDI9WmNU8nN0K5WcYwpVFG23oajktHGLNSnJRcp2KEolQ83abjzh1n0UfkA3TCV TZhPLL6FjRcwqRKX1dV2d/bZHzhQ4FS/nv85vyAhcUcSq0R6boS4Q8d3EftKEhly nlch4vl/aMVCXgCBB7Y6/SF8E9Xzx5ZTFkqnyZZptY+3hM8ZQbJJt2ppAU0Qo2JP gtS2FapBVozcKsWdA2pq2yU3gFQJC3rzMToms6z/LrdPhjs0RlCklVuv25HUoiY1 y0sXaoXzIPmmpkLGXwQx3qEJZM3rC1rR/i+yEFZB4/NzelN3TPYkSeI918gW+74B S1zluO20BDL+2MsDQ+1AKPPq3iOVuNrmTiOQm8kdllChOoS41pMURjWm1pthRc4p ScPSDqWHcmS4SrH+ftbT9ma4RskVindPtxsAf01mAbmLC92jj0WWSiFWaxydhkz1 430rxjFDKGZSBDoRbbxe9bE0NGWOfaInqrM3FwVNRXeZHdpUACGWU0Cx2AagtljY 9adFwCXdWc8r/Y9nZxBnkr+RQs01zJALcb44lqj70JYkUvoLPPNExIRwyh8vupjb zjgQj1Cdj2bnfnv1PB/DGK63aGUpELlXkKFkKionJWcilDdmtiY= =RJA2 -----END PGP SIGNATURE----- Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rmk/linux Pull ARM updates from Russell King: - add dev_is_amba() function to allow conversions during the next cycle - improve PREEMPT_RT performance with VFP - KASAN fixes for vmap stack * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rmk/linux: ARM: 9431/1: mm: Pair atomic_set_release() with _read_acquire() ARM: 9430/1: entry: Do a dummy read from VMAP shadow ARM: 9429/1: ioremap: Sync PGDs for VMALLOC shadow ARM: 9426/1: vfp: Move sending signals outside of vfp_state_hold()ed section. ARM: 9425/1: vfp: Use vfp_state_hold() in vfp_support_entry(). ARM: 9424/1: vfp: Use vfp_state_hold() in vfp_sync_hwstate(). ARM: 9423/1: vfp: Provide vfp_state_hold() for VFP locking. ARM: 9415/1: amba: Add dev_is_amba() function and export it for modules |
||
|
Masahiro Yamada
|
214c0eea43 |
kbuild: add $(objtree)/ prefix to some in-kernel build artifacts
$(objtree) refers to the top of the output directory of kernel builds. This commit adds the explicit $(objtree)/ prefix to build artifacts needed for building external modules. This change has no immediate impact, as the top-level Makefile currently defines: objtree := . This commit prepares for supporting the building of external modules in a different directory. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Nicolas Schier <nicolas@fjasle.eu> |
||
|
Linus Torvalds
|
2d32fba02e |
This is the bulk of the pin control changes for v6.13:
No core changes this time.
New drivers:
- Xlinix Versal pin control driver.
- Ocelot LAN969x pin control driver.
- T-Head TH1520 RISC-V SoC pin control driver.
- Qualcomm SM8750, IPQ5424, QCS8300, SAR2130P and QCS615 SoC
pin control drivers.
- Qualcomm SM8750 LPASS (low power audio subsystem)
pin control driver.
- Qualcomm PM8937 mixsig IC pin control support, GPIO and
MPP (multi-purpose-pin).
- Samsung Exynos8895 and Exynos9810 SoC pin control driver.
- SpacemiT K1 SoC pin control driver.
- Airhoa EN7581 IC pin control driver.
Improvements:
- The Renesas subdriver now supports schmitt-trigger and
open drain pin configurations if the hardware supports it.
- Support GPIOF and GPIOG banks in the Aspeed G6 SoC.
- Support the DSW community in the Intel Elkhartlake SoC.
-----BEGIN PGP SIGNATURE-----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=F7bj
-----END PGP SIGNATURE-----
Merge tag 'pinctrl-v6.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control updates from Linus Walleij:
"No core changes this time.
New drivers:
- Xlinix Versal pin control driver
- Ocelot LAN969x pin control driver
- T-Head TH1520 RISC-V SoC pin control driver
- Qualcomm SM8750, IPQ5424, QCS8300, SAR2130P and QCS615 SoC pin
control drivers
- Qualcomm SM8750 LPASS (low power audio subsystem) pin control
driver
- Qualcomm PM8937 mixsig IC pin control support, GPIO and MPP
(multi-purpose-pin)
- Samsung Exynos8895 and Exynos9810 SoC pin control driver
- SpacemiT K1 SoC pin control driver
- Airhoa EN7581 IC pin control driver
Improvements:
- The Renesas subdriver now supports schmitt-trigger and open drain
pin configurations if the hardware supports it
- Support GPIOF and GPIOG banks in the Aspeed G6 SoC
- Support the DSW community in the Intel Elkhartlake SoC"
* tag 'pinctrl-v6.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (105 commits)
pinctrl: airoha: Use unsigned long for bit search
pinctrl: k210: Undef K210_PC_DEFAULT
pinctrl: qcom: spmi: fix debugfs drive strength
pinctrl: qcom: Add sm8750 pinctrl driver
dt-bindings: pinctrl: qcom: Add sm8750 pinctrl
pinctrl: cy8c95x0: remove unneeded goto labels
pinctrl: cy8c95x0: embed iterator to the for-loop
pinctrl: cy8c95x0: Use temporary variable for struct device
pinctrl: cy8c95x0: use flexible sleeping in reset function
pinctrl: cy8c95x0: switch to using devm_regulator_get_enable()
pinctrl: cy8c95x0: Use 2-argument strscpy()
dt-bindings: pinctrl: sx150xq: allow gpio line naming
pinctrl: single: add marvell,pxa1908-padconf compatible
dt-bindings: pinctrl: pinctrl-single: add marvell,pxa1908-padconf compatible
dt-bindings: pinctrl: correct typo of description for cv1800
pinctrl: qcom: spmi-mpp: Add PM8937 compatible
dt-bindings: pinctrl: qcom,pmic-mpp: Document PM8937 compatible
pinctrl: qcom-pmic-gpio: add support for PM8937
dt-bindings: pinctrl: qcom,pmic-gpio: add PM8937
pinctrl: Use of_property_present() for non-boolean properties
...
|
||
|
Linus Torvalds
|
f5f4745a7f |
- The series "resource: A couple of cleanups" from Andy Shevchenko
performs some cleanups in the resource management code.
- The series "Improve the copy of task comm" from Yafang Shao addresses
possible race-induced overflows in the management of task_struct.comm[].
- The series "Remove unnecessary header includes from
{tools/}lib/list_sort.c" from Kuan-Wei Chiu adds some cleanups and a
small fix to the list_sort library code and to its selftest.
- The series "Enhance min heap API with non-inline functions and
optimizations" also from Kuan-Wei Chiu optimizes and cleans up the
min_heap library code.
- The series "nilfs2: Finish folio conversion" from Ryusuke Konishi
finishes off nilfs2's folioification.
- The series "add detect count for hung tasks" from Lance Yang adds more
userspace visibility into the hung-task detector's activity.
- Apart from that, singelton patches in many places - please see the
individual changelogs for details.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZ0L6lQAKCRDdBJ7gKXxA
jmEIAPwMSglNPKRIOgzOvHh8MUJW1Dy8iKJ2kWCO3f6QTUIM2AEA+PazZbUd/g2m
Ii8igH0UBibIgva7MrCyJedDI1O23AA=
=8BIU
-----END PGP SIGNATURE-----
Merge tag 'mm-nonmm-stable-2024-11-24-02-05' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
- The series "resource: A couple of cleanups" from Andy Shevchenko
performs some cleanups in the resource management code
- The series "Improve the copy of task comm" from Yafang Shao addresses
possible race-induced overflows in the management of
task_struct.comm[]
- The series "Remove unnecessary header includes from
{tools/}lib/list_sort.c" from Kuan-Wei Chiu adds some cleanups and a
small fix to the list_sort library code and to its selftest
- The series "Enhance min heap API with non-inline functions and
optimizations" also from Kuan-Wei Chiu optimizes and cleans up the
min_heap library code
- The series "nilfs2: Finish folio conversion" from Ryusuke Konishi
finishes off nilfs2's folioification
- The series "add detect count for hung tasks" from Lance Yang adds
more userspace visibility into the hung-task detector's activity
- Apart from that, singelton patches in many places - please see the
individual changelogs for details
* tag 'mm-nonmm-stable-2024-11-24-02-05' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (71 commits)
gdb: lx-symbols: do not error out on monolithic build
kernel/reboot: replace sprintf() with sysfs_emit()
lib: util_macros_kunit: add kunit test for util_macros.h
util_macros.h: fix/rework find_closest() macros
Improve consistency of '#error' directive messages
ocfs2: fix uninitialized value in ocfs2_file_read_iter()
hung_task: add docs for hung_task_detect_count
hung_task: add detect count for hung tasks
dma-buf: use atomic64_inc_return() in dma_buf_getfile()
fs/proc/kcore.c: fix coccinelle reported ERROR instances
resource: avoid unnecessary resource tree walking in __region_intersects()
ocfs2: remove unused errmsg function and table
ocfs2: cluster: fix a typo
lib/scatterlist: use sg_phys() helper
checkpatch: always parse orig_commit in fixes tag
nilfs2: convert metadata aops from writepage to writepages
nilfs2: convert nilfs_recovery_copy_block() to take a folio
nilfs2: convert nilfs_page_count_clean_buffers() to take a folio
nilfs2: remove nilfs_writepage
nilfs2: convert checkpoint file to be folio-based
...
|
||
|
Linus Torvalds
|
7f4f3b14e8 |
Add Rust support for trace events:
- Allow Rust code to have trace events Trace events is a popular way to debug what is happening inside the kernel or just to find out what is happening. Rust code is being added to the Linux kernel but it currently does not support the tracing infrastructure. Add support of trace events inside Rust code. -----BEGIN PGP SIGNATURE----- iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZ0DjqhQccm9zdGVkdEBn b29kbWlzLm9yZwAKCRAp5XQQmuv6qrLlAPsF6t/c1nHSGTKDv9FJDJe4JHdP7e+U 7X0S8BmSTKFNAQD+K2TEd0bjVP7ug8dQZBT+fveiFr+ARYxAwJ3JnEFjUwg= =Ab+T -----END PGP SIGNATURE----- Merge tag 'trace-rust-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace Pull rust trace event support from Steven Rostedt: "Allow Rust code to have trace events Trace events is a popular way to debug what is happening inside the kernel or just to find out what is happening. Rust code is being added to the Linux kernel but it currently does not support the tracing infrastructure. Add support of trace events inside Rust code" * tag 'trace-rust-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: rust: jump_label: skip formatting generated file jump_label: rust: pass a mut ptr to `static_key_count` samples: rust: fix `rust_print` build making it a combined module rust: add arch_static_branch jump_label: adjust inline asm to be consistent rust: samples: add tracepoint to Rust sample rust: add tracepoint support rust: add static_branch_unlikely for static_key_false |
||
|
Linus Torvalds
|
5c00ff742b |
- The series "zram: optimal post-processing target selection" from
Sergey Senozhatsky improves zram's post-processing selection algorithm.
This leads to improved memory savings.
- Wei Yang has gone to town on the mapletree code, contributing several
series which clean up the implementation:
- "refine mas_mab_cp()"
- "Reduce the space to be cleared for maple_big_node"
- "maple_tree: simplify mas_push_node()"
- "Following cleanup after introduce mas_wr_store_type()"
- "refine storing null"
- The series "selftests/mm: hugetlb_fault_after_madv improvements" from
David Hildenbrand fixes this selftest for s390.
- The series "introduce pte_offset_map_{ro|rw}_nolock()" from Qi Zheng
implements some rationaizations and cleanups in the page mapping code.
- The series "mm: optimize shadow entries removal" from Shakeel Butt
optimizes the file truncation code by speeding up the handling of shadow
entries.
- The series "Remove PageKsm()" from Matthew Wilcox completes the
migration of this flag over to being a folio-based flag.
- The series "Unify hugetlb into arch_get_unmapped_area functions" from
Oscar Salvador implements a bunch of consolidations and cleanups in the
hugetlb code.
- The series "Do not shatter hugezeropage on wp-fault" from Dev Jain
takes away the wp-fault time practice of turning a huge zero page into
small pages. Instead we replace the whole thing with a THP. More
consistent cleaner and potentiall saves a large number of pagefaults.
- The series "percpu: Add a test case and fix for clang" from Andy
Shevchenko enhances and fixes the kernel's built in percpu test code.
- The series "mm/mremap: Remove extra vma tree walk" from Liam Howlett
optimizes mremap() by avoiding doing things which we didn't need to do.
- The series "Improve the tmpfs large folio read performance" from
Baolin Wang teaches tmpfs to copy data into userspace at the folio size
rather than as individual pages. A 20% speedup was observed.
- The series "mm/damon/vaddr: Fix issue in
damon_va_evenly_split_region()" fro Zheng Yejian fixes DAMON splitting.
- The series "memcg-v1: fully deprecate charge moving" from Shakeel Butt
removes the long-deprecated memcgv2 charge moving feature.
- The series "fix error handling in mmap_region() and refactor" from
Lorenzo Stoakes cleanup up some of the mmap() error handling and
addresses some potential performance issues.
- The series "x86/module: use large ROX pages for text allocations" from
Mike Rapoport teaches x86 to use large pages for read-only-execute
module text.
- The series "page allocation tag compression" from Suren Baghdasaryan
is followon maintenance work for the new page allocation profiling
feature.
- The series "page->index removals in mm" from Matthew Wilcox remove
most references to page->index in mm/. A slow march towards shrinking
struct page.
- The series "damon/{self,kunit}tests: minor fixups for DAMON debugfs
interface tests" from Andrew Paniakin performs maintenance work for
DAMON's self testing code.
- The series "mm: zswap swap-out of large folios" from Kanchana Sridhar
improves zswap's batching of compression and decompression. It is a
step along the way towards using Intel IAA hardware acceleration for
this zswap operation.
- The series "kasan: migrate the last module test to kunit" from
Sabyrzhan Tasbolatov completes the migration of the KASAN built-in tests
over to the KUnit framework.
- The series "implement lightweight guard pages" from Lorenzo Stoakes
permits userapace to place fault-generating guard pages within a single
VMA, rather than requiring that multiple VMAs be created for this.
Improved efficiencies for userspace memory allocators are expected.
- The series "memcg: tracepoint for flushing stats" from JP Kobryn uses
tracepoints to provide increased visibility into memcg stats flushing
activity.
- The series "zram: IDLE flag handling fixes" from Sergey Senozhatsky
fixes a zram buglet which potentially affected performance.
- The series "mm: add more kernel parameters to control mTHP" from
Maíra Canal enhances our ability to control/configuremultisize THP from
the kernel boot command line.
- The series "kasan: few improvements on kunit tests" from Sabyrzhan
Tasbolatov has a couple of fixups for the KASAN KUnit tests.
- The series "mm/list_lru: Split list_lru lock into per-cgroup scope"
from Kairui Song optimizes list_lru memory utilization when lockdep is
enabled.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZzwFqgAKCRDdBJ7gKXxA
jkeuAQCkl+BmeYHE6uG0hi3pRxkupseR6DEOAYIiTv0/l8/GggD/Z3jmEeqnZaNq
xyyenpibWgUoShU2wZ/Ha8FE5WDINwg=
=JfWR
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2024-11-18-19-27' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- The series "zram: optimal post-processing target selection" from
Sergey Senozhatsky improves zram's post-processing selection
algorithm. This leads to improved memory savings.
- Wei Yang has gone to town on the mapletree code, contributing several
series which clean up the implementation:
- "refine mas_mab_cp()"
- "Reduce the space to be cleared for maple_big_node"
- "maple_tree: simplify mas_push_node()"
- "Following cleanup after introduce mas_wr_store_type()"
- "refine storing null"
- The series "selftests/mm: hugetlb_fault_after_madv improvements" from
David Hildenbrand fixes this selftest for s390.
- The series "introduce pte_offset_map_{ro|rw}_nolock()" from Qi Zheng
implements some rationaizations and cleanups in the page mapping
code.
- The series "mm: optimize shadow entries removal" from Shakeel Butt
optimizes the file truncation code by speeding up the handling of
shadow entries.
- The series "Remove PageKsm()" from Matthew Wilcox completes the
migration of this flag over to being a folio-based flag.
- The series "Unify hugetlb into arch_get_unmapped_area functions" from
Oscar Salvador implements a bunch of consolidations and cleanups in
the hugetlb code.
- The series "Do not shatter hugezeropage on wp-fault" from Dev Jain
takes away the wp-fault time practice of turning a huge zero page
into small pages. Instead we replace the whole thing with a THP. More
consistent cleaner and potentiall saves a large number of pagefaults.
- The series "percpu: Add a test case and fix for clang" from Andy
Shevchenko enhances and fixes the kernel's built in percpu test code.
- The series "mm/mremap: Remove extra vma tree walk" from Liam Howlett
optimizes mremap() by avoiding doing things which we didn't need to
do.
- The series "Improve the tmpfs large folio read performance" from
Baolin Wang teaches tmpfs to copy data into userspace at the folio
size rather than as individual pages. A 20% speedup was observed.
- The series "mm/damon/vaddr: Fix issue in
damon_va_evenly_split_region()" fro Zheng Yejian fixes DAMON
splitting.
- The series "memcg-v1: fully deprecate charge moving" from Shakeel
Butt removes the long-deprecated memcgv2 charge moving feature.
- The series "fix error handling in mmap_region() and refactor" from
Lorenzo Stoakes cleanup up some of the mmap() error handling and
addresses some potential performance issues.
- The series "x86/module: use large ROX pages for text allocations"
from Mike Rapoport teaches x86 to use large pages for
read-only-execute module text.
- The series "page allocation tag compression" from Suren Baghdasaryan
is followon maintenance work for the new page allocation profiling
feature.
- The series "page->index removals in mm" from Matthew Wilcox remove
most references to page->index in mm/. A slow march towards shrinking
struct page.
- The series "damon/{self,kunit}tests: minor fixups for DAMON debugfs
interface tests" from Andrew Paniakin performs maintenance work for
DAMON's self testing code.
- The series "mm: zswap swap-out of large folios" from Kanchana Sridhar
improves zswap's batching of compression and decompression. It is a
step along the way towards using Intel IAA hardware acceleration for
this zswap operation.
- The series "kasan: migrate the last module test to kunit" from
Sabyrzhan Tasbolatov completes the migration of the KASAN built-in
tests over to the KUnit framework.
- The series "implement lightweight guard pages" from Lorenzo Stoakes
permits userapace to place fault-generating guard pages within a
single VMA, rather than requiring that multiple VMAs be created for
this. Improved efficiencies for userspace memory allocators are
expected.
- The series "memcg: tracepoint for flushing stats" from JP Kobryn uses
tracepoints to provide increased visibility into memcg stats flushing
activity.
- The series "zram: IDLE flag handling fixes" from Sergey Senozhatsky
fixes a zram buglet which potentially affected performance.
- The series "mm: add more kernel parameters to control mTHP" from
Maíra Canal enhances our ability to control/configuremultisize THP
from the kernel boot command line.
- The series "kasan: few improvements on kunit tests" from Sabyrzhan
Tasbolatov has a couple of fixups for the KASAN KUnit tests.
- The series "mm/list_lru: Split list_lru lock into per-cgroup scope"
from Kairui Song optimizes list_lru memory utilization when lockdep
is enabled.
* tag 'mm-stable-2024-11-18-19-27' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (215 commits)
cma: enforce non-zero pageblock_order during cma_init_reserved_mem()
mm/kfence: add a new kunit test test_use_after_free_read_nofault()
zram: fix NULL pointer in comp_algorithm_show()
memcg/hugetlb: add hugeTLB counters to memcg
vmstat: call fold_vm_zone_numa_events() before show per zone NUMA event
mm: mmap_lock: check trace_mmap_lock_$type_enabled() instead of regcount
zram: ZRAM_DEF_COMP should depend on ZRAM
MAINTAINERS/MEMORY MANAGEMENT: add document files for mm
Docs/mm/damon: recommend academic papers to read and/or cite
mm: define general function pXd_init()
kmemleak: iommu/iova: fix transient kmemleak false positive
mm/list_lru: simplify the list_lru walk callback function
mm/list_lru: split the lock to per-cgroup scope
mm/list_lru: simplify reparenting and initial allocation
mm/list_lru: code clean up for reparenting
mm/list_lru: don't export list_lru_add
mm/list_lru: don't pass unnecessary key parameters
kasan: add kunit tests for kmalloc_track_caller, kmalloc_node_track_caller
kasan: change kasan_atomics kunit test as KUNIT_CASE_SLOW
kasan: use EXPORT_SYMBOL_IF_KUNIT to export symbols
...
|
||
|
Linus Torvalds
|
c01f664e4c |
\n
-----BEGIN PGP SIGNATURE----- iQEzBAABCAAdFiEEq1nRK9aeMoq1VSgcnJ2qBz9kQNkFAmc/WXkACgkQnJ2qBz9k QNnwjAf/c8K3Vhw9RuKMtPF0K+gC//0mLsq+WmgrtXfMLvbSymrACnwHFJzpNGeS iEqCYlCC7vlqzPXpsVRlFeHpM52oVnE/wFF0Hp1h/Y1oqbRSzur6iSl4epmmBN+K AsPoWEXco7ABqtrhoZb0b1n7io9VorHN4nLhO6KWD83nZAawJDWgSw0sNCqcT6to vVxR3baP/EhONxNquxXe2lxq26dMilehmTk4AOyYslNYb0iG4r18TPyNb7fmuuKG M+nFfMnM9EPH8lnmgx6Mg/X77d/eZoq4pMRmeqSsroB5k/AQJnNrGweNL1+yr7OY adWNOMGWdNNQXPFgGbL5yZwNZ64kRA== =Eq1B -----END PGP SIGNATURE----- Merge tag 'reiserfs_delete' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs Pull reiserfs removal from Jan Kara: "The deprecation period of reiserfs is ending at the end of this year so it is time to remove it" * tag 'reiserfs_delete' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: reiserfs: The last commit |
||
|
Linus Torvalds
|
43fb83c17b |
ARM: soc updates for 6.13
The SoC specific code updates for 6.13 are fairly minimal. One Broadcom SoC model gains automatic configuration for the debug uarg as we have on many other machines, the remaining changes are trivial cleanups. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmc+D8IACgkQYKtH/8kJ UicuyhAAqR3ps9ukDj4jIVrQthV76rMb6HfEF4gQ4qxIjS3uLp5wfqjxzeTI7bKY ntrzU9rAxgMdTuRDVqONCxjgBvtg7pG9kXlbndVhl11RdryEeO/fat99V2mPN6yS 0t9tR6lxVcz3VRI5qcyCRYLRicDXyeNklsMwEhfSolS1hWbTG0b/qtn8oa+vQ7bs U33rnvudrC36Wpy4HU6XIissq1RgleUrGqC6L2M3OLSEOlS8tM4RBA215VaDiWs9 fP8dYhdMVWmlif9pXi1L1M3uqEE3ahVDwzqg1bSc0LmX7nn4rXGGgu/YGiALuW4t KmsoTdcwaPxiQR+WVp3G6EEVxumFpMfX1dGiJ8ZagaI+pbXpjHej6B+xhWCRgjfp eTK0YeGjDduEOaaozGys5NdqoGFKPpl+npLD1rQGBtizCJO1x6zINAyuRgNHhyYa 640Bn77O7Rs+41qao2Nnr4mfbur73d3q+K1qOy4Tx3BL5fQGyz4PwUkT/wG4C++j esCBO2lA9opw9ZJzBSFWx6ez0GtEW+kVUf3dNDSXxYawVNBrIoV61xnG7Xcfqz0x RFSWTATWKLI34Px6fuorVxVw8xcGdQGgvbvIDbj2aiC8yXIbzeeSs8P9pEsakYD9 eej8H6eRy/EnOwBC8yJXCHoAA31PqaO+aLI5Vf0p0m0Ibtv/1zQ= =lQ3B -----END PGP SIGNATURE----- Merge tag 'soc-arm-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC updates from Arnd Bergmann: "The SoC specific code updates for 6.13 are fairly minimal. One Broadcom SoC model gains automatic configuration for the debug uarg as we have on many other machines, the remaining changes are trivial cleanups" * tag 'soc-arm-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: ARM: imx: Switch to new sys-off handler API ARM: bcm: brcmstb: Drop custom init_irq callback ARM: bcm: Support BCMBCA debug UART ARM: zynq: Remove unused zynq_slcr_init() declaration ASoC: samsung: Remove obsoleted declaration for s3c64xx_ac97_setup_gpio ARM: samsung: Remove obsoleted declaration for s3c_hwmon_set_platdata |
||
|
Linus Torvalds
|
06e47dce8f |
soc: defconfig updates for 6.13
As usual, a few newly added device drivers get enabled in the arm32 multi_v7_defconfig and arm64 defconfig as well as a few of the SoC specific config files. The main visible change is the inclusion of (reduced) debug info by default in the 32-bit defconfig. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmc+EHIACgkQYKtH/8kJ Uid+ahAAnkQNh7m0+0l8O1DxLVjCVDb76f4r+dvYWBzBzOZoSvkLQzhKILGmgjFd tfLpWr7sfpgT7YPZxrwHK/muwpZ7rflTiC5P0qpgeo4VzO6VXv5r124uzYg0nEPo /t4hzCkAADKu80hNeDfaKFk9GbqvkOBKnO0PHpuTPGubiy3gU2cH6EvyqUYokvBM c0iD8fPtI5zb6oBju1oRFJtXIX6TJXXbQvjOIVmhz7cEsl/RAmPJLbbpgT/u8roR pCIHX1pqw1bURaUrBQiv33E266tF6kg9KYJUsGvXkykd0ifyXSOneYsxoadvO5x/ +2Xrfj243aMMz9EDXd2oczdpuoPyGkyUeaaNy61EvgMzaYpf3B9B7g7mqfuyhaCs VvXbWIc3jpA3P8dbyBOZhQQF8NzHMP8Dj8ymQhN17FiwkQTDV6CtHHO8srkKSoYU IGgtNJce0IvLEz87VU9C1F6DA5dscdTRGrlDErv+2ap5IeyCtE4gJaFNO+/64wUk QUP+gphCqxMXQuLmOIrKV9dsslnChRM9qlgNaJQMbvKvT25xRIpNc9/mmVPWoAs+ 1A3wdHn/ZOvaFBcWwNHpZaNu/3ybHGp60wkejWCiEzhaLabXBsEoKOap7+1cWGTK IlVUiaJoNIYBoLACTqx42AATgn0TsNXj4NVHq3poiodi1/7wunw= =tElw -----END PGP SIGNATURE----- Merge tag 'soc-defconfig-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull SoC defconfig updates from Arnd Bergmann: "As usual, a few newly added device drivers get enabled in the arm32 multi_v7_defconfig and arm64 defconfig as well as a few of the SoC specific config files. The main visible change is the inclusion of (reduced) debug info by default in the 32-bit defconfig" * tag 'soc-defconfig-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: ARM: imx_v6_v7_defconfig: Enable drivers for Kobo Clara 2E arm64: defconfig: Enable VBATTB clock and Renesas RTCA-3 arm64: defconfig: Enable PCF857X GPIO expander arm64: defconfig: Enable sc7280 clock controllers ARM: configs: at91: enable PAC1934 driver as module ARM: multi_v7_defconfig: Enable debugging symbols by default |
||
|
Linus Torvalds
|
9c39d5ab45 |
soc: devicetree updates for 6.13
This release adds the devicetree files for an impressive number of new
SoC variants, though as expected these are all related to others we
already support:
- The microchip sam9x7 devicetree is now added, after the device driver
and platform code has already made it in. This is likely the last ARMv5
(!) platform to ever get added, updating the 20+ year old at91/sam9
platform wtih DDR3 memory and gigabit ethernet.
- On the Apple platform, there are now devicetree files for a number of
A-series SoCs in addition to the M-series ones, these are used
primarily in phones and tablets, but are closely related to the
already supported chips.
- Samsung Exynos 8895 and Exynos 990 are more phone SoCs used in older
Samsung Galaxy phones.
- Qualcomm Snapdragon 778G (SM7325) is another phone SoC, closely related
to the Snapdragon 7c+ Gen 3 (SC7280) used in low-end laptops.
- Rockchip RK3528 and RK3576 are new variants of their TV box and Tablet
chips, still using the older ARMv8.0 cores from RK3328/RK3399 but
with a newer process and other improvements from the RK35xx (otherwise
ARMv8.2) chips. RK3566T and RK3399-S are also added, these are just
lower-cost versions of their normal counterparts.
- TI J742S2 is a feature-reduced version of the J784s4
industrial/automotive SoC, with fewer CPU cores.
- Sophgo SG2002 is an embedded SoC with one RISC-V (C906) and one ARM
(Cortex-A53) core, at this point support is only added for running
on the RISC-V side on the LicheeRV Nano board.
A total of 92 new .dts files describing individual machines is added,
which must be a new record. The majority of these is for the newly added
chips above, notably all the Apple phones and tablets. The other new
machines include nine industrial/embedded boards with NXP i.MX6 or i.MX8
SoCs, eight for Rockchips RK35XX and one or two each for Rockchips RV1109,
RK3308, Allwinner A33, Tegra 234, Qualcomm qcs9100/sc8280xp/x1e80100,
TI AM625 and Starfive JH7110.
As usual there are also many newlyad added features in existing boards
as well as cleanups and minor bugfixes.
-----BEGIN PGP SIGNATURE-----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=Ha1w
-----END PGP SIGNATURE-----
Merge tag 'soc-dt-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC devicetree updates from Arnd Bergmann:
"This release adds the devicetree files for an impressive number of new
SoC variants, though as expected these are all related to others we
already support:
- The microchip sam9x7 devicetree is now added, after the device
driver and platform code has already made it in. This is likely the
last ARMv5 (!) platform to ever get added, updating the 20+ year
old at91/sam9 platform with DDR3 memory and gigabit ethernet.
- On the Apple platform, there are now devicetree files for a number
of A-series SoCs in addition to the M-series ones, these are used
primarily in phones and tablets, but are closely related to the
already supported chips.
- Samsung Exynos 8895 and Exynos 990 are more phone SoCs used in
older Samsung Galaxy phones.
- Qualcomm Snapdragon 778G (SM7325) is another phone SoC, closely
related to the Snapdragon 7c+ Gen 3 (SC7280) used in low-end
laptops.
- Rockchip RK3528 and RK3576 are new variants of their TV box and
Tablet chips, still using the older ARMv8.0 cores from
RK3328/RK3399 but with a newer process and other improvements from
the RK35xx (otherwise ARMv8.2) chips. RK3566T and RK3399-S are also
added, these are just lower-cost versions of their normal
counterparts.
- TI J742S2 is a feature-reduced version of the J784s4
industrial/automotive SoC, with fewer CPU cores.
- Sophgo SG2002 is an embedded SoC with one RISC-V (C906) and one ARM
(Cortex-A53) core, at this point support is only added for running
on the RISC-V side on the LicheeRV Nano board.
A total of 92 new .dts files describing individual machines is added,
which must be a new record. The majority of these is for the newly
added chips above, notably all the Apple phones and tablets. The other
new machines include nine industrial/embedded boards with NXP i.MX6 or
i.MX8 SoCs, eight for Rockchips RK35XX and one or two each for
Rockchips RV1109, RK3308, Allwinner A33, Tegra 234, Qualcomm
qcs9100/sc8280xp/x1e80100, TI AM625 and Starfive JH7110.
As usual there are also many newly added features in existing boards
as well as cleanups and minor bugfixes"
* tag 'soc-dt-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (718 commits)
arm64: dts: apm: Remove unused and undocumented "bus_num" property
arm: dts: spear13xx: Remove unused and undocumented "pl022,slave-tx-disable" property
arm64: dts: amd: Remove unused and undocumented "amd,zlib-support" property
arm64: dts: lg131x: Update spi clock properties
arm64: dts: seattle: Update spi clock properties
arm64: dts: rockchip: use less broad pinctrl for pcie3x1 on Radxa E25
arm64: dts: rockchip: add Radxa ROCK 5C
dt-bindings: arm: rockchip: add Radxa ROCK 5C
arm64: dts: rockchip: orangepi-5-plus: Enable GPU
arm64: dts: rockchip: enable USB3 on NanoPC-T6
arm64: dts: rockchip: adapt regulator nodenames to preferred form
arm64: dts: rockchip: Enable HDMI display for rk3588 Cool Pi GenBook
arm64: dts: rockchip: Enable HDMI display for rk3588 Cool Pi 4B
arm64: dts: rockchip: Enable HDMI0 for rk3588 Cool Pi CM5 EVB
arm64: dts: rockchip: Enable HDMI on NanoPi R6C/R6S
arm64: dts: rockchip: Enable GPU on NanoPi R6C/R6S
arm64: dts: rockchip: Enable HDMI on Hardkernel ODROID-M2
arm64: dts: rockchip: Remove non-removable flag from sdmmc on rk3576-sige5
arm64: dts: allwinner: a100: perf1: Add eMMC and MMC node
arm64: dts: allwinner: pinephone: Add mount matrix to accelerometer
...
|
||
|
Linus Torvalds
|
79caa6c88a |
asm-generic updates for 6.13
These are a number of unrelated cleanups, generally simplifying the
architecture specific header files:
- A series from Al Viro simplifies asm/vga.h, after it turns out that
most of it can be generalized.
- A series from Julian Vetter adds a common version of
memcpy_{to,from}io() and memset_io() and changes most architectures
to use that instead of their own implementation
- A series from Niklas Schnelle concludes his work to make PC
style inb()/outb() optional
- Nicolas Pitre contributes improvements for the generic do_div()
helper
- Christoph Hellwig adds a generic version of page_to_phys()
and phys_to_page(), replacing the slightly different architecture
specific definitions.
- Uwe Kleine-Koenig has a minor cleanup for ioctl definitions
-----BEGIN PGP SIGNATURE-----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=zEHk
-----END PGP SIGNATURE-----
Merge tag 'asm-generic-3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull asm-generic updates from Arnd Bergmann:
"These are a number of unrelated cleanups, generally simplifying the
architecture specific header files:
- A series from Al Viro simplifies asm/vga.h, after it turns out that
most of it can be generalized.
- A series from Julian Vetter adds a common version of
memcpy_{to,from}io() and memset_io() and changes most architectures
to use that instead of their own implementation
- A series from Niklas Schnelle concludes his work to make PC style
inb()/outb() optional
- Nicolas Pitre contributes improvements for the generic do_div()
helper
- Christoph Hellwig adds a generic version of page_to_phys() and
phys_to_page(), replacing the slightly different architecture
specific definitions.
- Uwe Kleine-Koenig has a minor cleanup for ioctl definitions"
* tag 'asm-generic-3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: (24 commits)
empty include/asm-generic/vga.h
sparc: get rid of asm/vga.h
asm/vga.h: don't bother with scr_mem{cpy,move}v() unless we need to
vt_buffer.h: get rid of dead code in default scr_...() instances
tty: serial: export serial_8250_warn_need_ioport
lib/iomem_copy: fix kerneldoc format style
hexagon: simplify asm/io.h for !HAS_IOPORT
loongarch: Use new fallback IO memcpy/memset
csky: Use new fallback IO memcpy/memset
arm64: Use new fallback IO memcpy/memset
New implementation for IO memcpy and IO memset
watchdog: Add HAS_IOPORT dependency for SBC8360 and SBC7240
__arch_xprod64(): make __always_inline when optimizing for performance
ARM: div64: improve __arch_xprod_64()
asm-generic/div64: optimize/simplify __div64_const32()
lib/math/test_div64: add some edge cases relevant to __div64_const32()
asm-generic: add an optional pfn_valid check to page_to_phys
asm-generic: provide generic page_to_phys and phys_to_page implementations
asm-generic/io.h: Remove I/O port accessors for HAS_IOPORT=n
tty: serial: handle HAS_IOPORT dependencies
...
|
||
|
Linus Torvalds
|
e6de688e93 |
Devicetree updates for v6.13:
Bindings:
- Enable dtc "interrupt_provider" warnings for binding examples.
Fix the warnings in fsl,mu-msi and ti,sci-inta due to this.
- Convert zii,rave-sp-wdt, zii,rave-sp-pwrbutton, and
altr,fpga-passive-serial to DT schema format
- Add some documentation on the different forms of YAML text blocks
which are a constant source of review comments
- Fix some schema errors in constraints for arrays
- Add compatibles for qcom,sar2130p-pdc and onnn,adt7462
DT core:
- Allow overlay kunit tests to run CONFIG_OF_OVERLAY=n
- Add some warnings on deprecated address handling
- Rework early_init_dt_scan() so the arch can pass in the phys address
of the DTB as __pa() is not always valid to use. This fixes a warning
for arm64 with kexec.
- Add and use some new DT graph iterators for iterating over ports and
endpoints
- Rework reserved-memory handling to be sized dynamically for fixed
regions
- Optimize of_modalias() to avoid a strlen() call
- Constify struct device_node and property pointers where ever possible
-----BEGIN PGP SIGNATURE-----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=NCYS
-----END PGP SIGNATURE-----
Merge tag 'devicetree-for-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
"Bindings:
- Enable dtc "interrupt_provider" warnings for binding examples. Fix
the warnings in fsl,mu-msi and ti,sci-inta due to this.
- Convert zii,rave-sp-wdt, zii,rave-sp-pwrbutton, and
altr,fpga-passive-serial to DT schema format
- Add some documentation on the different forms of YAML text blocks
which are a constant source of review comments
- Fix some schema errors in constraints for arrays
- Add compatibles for qcom,sar2130p-pdc and onnn,adt7462
DT core:
- Allow overlay kunit tests to run CONFIG_OF_OVERLAY=n
- Add some warnings on deprecated address handling
- Rework early_init_dt_scan() so the arch can pass in the phys
address of the DTB as __pa() is not always valid to use. This fixes
a warning for arm64 with kexec.
- Add and use some new DT graph iterators for iterating over ports
and endpoints
- Rework reserved-memory handling to be sized dynamically for fixed
regions
- Optimize of_modalias() to avoid a strlen() call
- Constify struct device_node and property pointers where ever
possible"
* tag 'devicetree-for-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (36 commits)
of: Allow overlay kunit tests to run CONFIG_OF_OVERLAY=n
dt-bindings: interrupt-controller: qcom,pdc: Add SAR2130P compatible
of/address: Rework bus matching to avoid warnings
of: WARN on deprecated #address-cells/#size-cells handling
of/fdt: Don't use default address cell sizes for address translation
dt-bindings: Enable dtc "interrupt_provider" warnings
of/fdt: add dt_phys arg to early_init_dt_scan and early_init_dt_verify
dt-bindings: cache: qcom,llcc: Fix X1E80100 reg entries
dt-bindings: watchdog: convert zii,rave-sp-wdt.txt to yaml format
dt-bindings: input: convert zii,rave-sp-pwrbutton.txt to yaml
media: xilinx-tpg: use new of_graph functions
fbdev: omapfb: use new of_graph functions
gpu: drm: omapdrm: use new of_graph functions
ASoC: audio-graph-card2: use new of_graph functions
ASoC: audio-graph-card: use new of_graph functions
ASoC: test-component: use new of_graph functions
of: property: use new of_graph functions
of: property: add of_graph_get_next_port_endpoint()
of: property: add of_graph_get_next_port()
of: module: remove strlen() call in of_modalias()
...
|
||
|
Linus Torvalds
|
bf9aa14fc5 |
A rather large update for timekeeping and timers:
- The final step to get rid of auto-rearming posix-timers
posix-timers are currently auto-rearmed by the kernel when the signal
of the timer is ignored so that the timer signal can be delivered once
the corresponding signal is unignored.
This requires to throttle the timer to prevent a DoS by small intervals
and keeps the system pointlessly out of low power states for no value.
This is a long standing non-trivial problem due to the lock order of
posix-timer lock and the sighand lock along with life time issues as
the timer and the sigqueue have different life time rules.
Cure this by:
* Embedding the sigqueue into the timer struct to have the same life
time rules. Aside of that this also avoids the lookup of the timer
in the signal delivery and rearm path as it's just a always valid
container_of() now.
* Queuing ignored timer signals onto a seperate ignored list.
* Moving queued timer signals onto the ignored list when the signal is
switched to SIG_IGN before it could be delivered.
* Walking the ignored list when SIG_IGN is lifted and requeue the
signals to the actual signal lists. This allows the signal delivery
code to rearm the timer.
This also required to consolidate the signal delivery rules so they are
consistent across all situations. With that all self test scenarios
finally succeed.
- Core infrastructure for VFS multigrain timestamping
This is required to allow the kernel to use coarse grained time stamps
by default and switch to fine grained time stamps when inode attributes
are actively observed via getattr().
These changes have been provided to the VFS tree as well, so that the
VFS specific infrastructure could be built on top.
- Cleanup and consolidation of the sleep() infrastructure
* Move all sleep and timeout functions into one file
* Rework udelay() and ndelay() into proper documented inline functions
and replace the hardcoded magic numbers by proper defines.
* Rework the fsleep() implementation to take the reality of the timer
wheel granularity on different HZ values into account. Right now the
boundaries are hard coded time ranges which fail to provide the
requested accuracy on different HZ settings.
* Update documentation for all sleep/timeout related functions and fix
up stale documentation links all over the place
* Fixup a few usage sites
- Rework of timekeeping and adjtimex(2) to prepare for multiple PTP clocks
A system can have multiple PTP clocks which are participating in
seperate and independent PTP clock domains. So far the kernel only
considers the PTP clock which is based on CLOCK TAI relevant as that's
the clock which drives the timekeeping adjustments via the various user
space daemons through adjtimex(2).
The non TAI based clock domains are accessible via the file descriptor
based posix clocks, but their usability is very limited. They can't be
accessed fast as they always go all the way out to the hardware and
they cannot be utilized in the kernel itself.
As Time Sensitive Networking (TSN) gains traction it is required to
provide fast user and kernel space access to these clocks.
The approach taken is to utilize the timekeeping and adjtimex(2)
infrastructure to provide this access in a similar way how the kernel
provides access to clock MONOTONIC, REALTIME etc.
Instead of creating a duplicated infrastructure this rework converts
timekeeping and adjtimex(2) into generic functionality which operates
on pointers to data structures instead of using static variables.
This allows to provide time accessors and adjtimex(2) functionality for
the independent PTP clocks in a subsequent step.
- Consolidate hrtimer initialization
hrtimers are set up by initializing the data structure and then
seperately setting the callback function for historical reasons.
That's an extra unnecessary step and makes Rust support less straight
forward than it should be.
Provide a new set of hrtimer_setup*() functions and convert the core
code and a few usage sites of the less frequently used interfaces over.
The bulk of the htimer_init() to hrtimer_setup() conversion is already
prepared and scheduled for the next merge window.
- Drivers:
* Ensure that the global timekeeping clocksource is utilizing the
cluster 0 timer on MIPS multi-cluster systems.
Otherwise CPUs on different clusters use their cluster specific
clocksource which is not guaranteed to be synchronized with other
clusters.
* Mostly boring cleanups, fixes, improvements and code movement
-----BEGIN PGP SIGNATURE-----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=2VC6
-----END PGP SIGNATURE-----
Merge tag 'timers-core-2024-11-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer updates from Thomas Gleixner:
"A rather large update for timekeeping and timers:
- The final step to get rid of auto-rearming posix-timers
posix-timers are currently auto-rearmed by the kernel when the
signal of the timer is ignored so that the timer signal can be
delivered once the corresponding signal is unignored.
This requires to throttle the timer to prevent a DoS by small
intervals and keeps the system pointlessly out of low power states
for no value. This is a long standing non-trivial problem due to
the lock order of posix-timer lock and the sighand lock along with
life time issues as the timer and the sigqueue have different life
time rules.
Cure this by:
- Embedding the sigqueue into the timer struct to have the same
life time rules. Aside of that this also avoids the lookup of
the timer in the signal delivery and rearm path as it's just a
always valid container_of() now.
- Queuing ignored timer signals onto a seperate ignored list.
- Moving queued timer signals onto the ignored list when the
signal is switched to SIG_IGN before it could be delivered.
- Walking the ignored list when SIG_IGN is lifted and requeue the
signals to the actual signal lists. This allows the signal
delivery code to rearm the timer.
This also required to consolidate the signal delivery rules so they
are consistent across all situations. With that all self test
scenarios finally succeed.
- Core infrastructure for VFS multigrain timestamping
This is required to allow the kernel to use coarse grained time
stamps by default and switch to fine grained time stamps when inode
attributes are actively observed via getattr().
These changes have been provided to the VFS tree as well, so that
the VFS specific infrastructure could be built on top.
- Cleanup and consolidation of the sleep() infrastructure
- Move all sleep and timeout functions into one file
- Rework udelay() and ndelay() into proper documented inline
functions and replace the hardcoded magic numbers by proper
defines.
- Rework the fsleep() implementation to take the reality of the
timer wheel granularity on different HZ values into account.
Right now the boundaries are hard coded time ranges which fail
to provide the requested accuracy on different HZ settings.
- Update documentation for all sleep/timeout related functions
and fix up stale documentation links all over the place
- Fixup a few usage sites
- Rework of timekeeping and adjtimex(2) to prepare for multiple PTP
clocks
A system can have multiple PTP clocks which are participating in
seperate and independent PTP clock domains. So far the kernel only
considers the PTP clock which is based on CLOCK TAI relevant as
that's the clock which drives the timekeeping adjustments via the
various user space daemons through adjtimex(2).
The non TAI based clock domains are accessible via the file
descriptor based posix clocks, but their usability is very limited.
They can't be accessed fast as they always go all the way out to
the hardware and they cannot be utilized in the kernel itself.
As Time Sensitive Networking (TSN) gains traction it is required to
provide fast user and kernel space access to these clocks.
The approach taken is to utilize the timekeeping and adjtimex(2)
infrastructure to provide this access in a similar way how the
kernel provides access to clock MONOTONIC, REALTIME etc.
Instead of creating a duplicated infrastructure this rework
converts timekeeping and adjtimex(2) into generic functionality
which operates on pointers to data structures instead of using
static variables.
This allows to provide time accessors and adjtimex(2) functionality
for the independent PTP clocks in a subsequent step.
- Consolidate hrtimer initialization
hrtimers are set up by initializing the data structure and then
seperately setting the callback function for historical reasons.
That's an extra unnecessary step and makes Rust support less
straight forward than it should be.
Provide a new set of hrtimer_setup*() functions and convert the
core code and a few usage sites of the less frequently used
interfaces over.
The bulk of the htimer_init() to hrtimer_setup() conversion is
already prepared and scheduled for the next merge window.
- Drivers:
- Ensure that the global timekeeping clocksource is utilizing the
cluster 0 timer on MIPS multi-cluster systems.
Otherwise CPUs on different clusters use their cluster specific
clocksource which is not guaranteed to be synchronized with
other clusters.
- Mostly boring cleanups, fixes, improvements and code movement"
* tag 'timers-core-2024-11-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (140 commits)
posix-timers: Fix spurious warning on double enqueue versus do_exit()
clocksource/drivers/arm_arch_timer: Use of_property_present() for non-boolean properties
clocksource/drivers/gpx: Remove redundant casts
clocksource/drivers/timer-ti-dm: Fix child node refcount handling
dt-bindings: timer: actions,owl-timer: convert to YAML
clocksource/drivers/ralink: Add Ralink System Tick Counter driver
clocksource/drivers/mips-gic-timer: Always use cluster 0 counter as clocksource
clocksource/drivers/timer-ti-dm: Don't fail probe if int not found
clocksource/drivers:sp804: Make user selectable
clocksource/drivers/dw_apb: Remove unused dw_apb_clockevent functions
hrtimers: Delete hrtimer_init_on_stack()
alarmtimer: Switch to use hrtimer_setup() and hrtimer_setup_on_stack()
io_uring: Switch to use hrtimer_setup_on_stack()
sched/idle: Switch to use hrtimer_setup_on_stack()
hrtimers: Delete hrtimer_init_sleeper_on_stack()
wait: Switch to use hrtimer_setup_sleeper_on_stack()
timers: Switch to use hrtimer_setup_sleeper_on_stack()
net: pktgen: Switch to use hrtimer_setup_sleeper_on_stack()
futex: Switch to use hrtimer_setup_sleeper_on_stack()
fs/aio: Switch to use hrtimer_setup_sleeper_on_stack()
...
|
||
|
Linus Torvalds
|
0352387523 |
First step of consolidating the VDSO data page handling:
The VDSO data page handling is architecture specific for historical
reasons, but there is no real technical reason to do so.
Aside of that VDSO data has become a dump ground for various mechanisms
and fail to provide a clear separation of the functionalities.
Clean this up by:
* consolidating the VDSO page data by getting rid of architecture
specific warts especially in x86 and PowerPC.
* removing the last includes of header files which are pulling in other
headers outside of the VDSO namespace.
* seperating timekeeping and other VDSO data accordingly.
Further consolidation of the VDSO page handling is done in subsequent
changes scheduled for the next merge window.
This also lays the ground for expanding the VDSO time getters for
independent PTP clocks in a generic way without making every architecture
add support seperately.
-----BEGIN PGP SIGNATURE-----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=q5eD
-----END PGP SIGNATURE-----
Merge tag 'timers-vdso-2024-11-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull vdso data page handling updates from Thomas Gleixner:
"First steps of consolidating the VDSO data page handling.
The VDSO data page handling is architecture specific for historical
reasons, but there is no real technical reason to do so.
Aside of that VDSO data has become a dump ground for various
mechanisms and fail to provide a clear separation of the
functionalities.
Clean this up by:
- consolidating the VDSO page data by getting rid of architecture
specific warts especially in x86 and PowerPC.
- removing the last includes of header files which are pulling in
other headers outside of the VDSO namespace.
- seperating timekeeping and other VDSO data accordingly.
Further consolidation of the VDSO page handling is done in subsequent
changes scheduled for the next merge window.
This also lays the ground for expanding the VDSO time getters for
independent PTP clocks in a generic way without making every
architecture add support seperately"
* tag 'timers-vdso-2024-11-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (42 commits)
x86/vdso: Add missing brackets in switch case
vdso: Rename struct arch_vdso_data to arch_vdso_time_data
powerpc: Split systemcfg struct definitions out from vdso
powerpc: Split systemcfg data out of vdso data page
powerpc: Add kconfig option for the systemcfg page
powerpc/pseries/lparcfg: Use num_possible_cpus() for potential processors
powerpc/pseries/lparcfg: Fix printing of system_active_processors
powerpc/procfs: Propagate error of remap_pfn_range()
powerpc/vdso: Remove offset comment from 32bit vdso_arch_data
x86/vdso: Split virtual clock pages into dedicated mapping
x86/vdso: Delete vvar.h
x86/vdso: Access vdso data without vvar.h
x86/vdso: Move the rng offset to vsyscall.h
x86/vdso: Access rng vdso data without vvar.h
x86/vdso: Access timens vdso data without vvar.h
x86/vdso: Allocate vvar page from C code
x86/vdso: Access rng data from kernel without vvar
x86/vdso: Place vdso_data at beginning of vvar page
x86/vdso: Use __arch_get_vdso_data() to access vdso data
x86/mm/mmap: Remove arch_vma_name()
...
|
||
|
Linus Torvalds
|
5c2b050848 |
A set of updates for the interrupt subsystem:
- Tree wide:
* Make nr_irqs static to the core code and provide accessor functions
to remove existing and prevent future aliasing problems with local
variables or function arguments of the same name.
- Core code:
* Prevent freeing an interrupt in the devres code which is not managed
by devres in the first place.
* Use seq_put_decimal_ull_width() for decimal values output in
/proc/interrupts which increases performance significantly as it
avoids parsing the format strings over and over.
* Optimize raising the timer and hrtimer soft interrupts by using the
'set bit only' variants instead of the combined version which checks
whether ksoftirqd should be woken up. The latter is a pointless
exercise as both soft interrupts are raised in the context of the
timer interrupt and therefore never wake up ksoftirqd.
* Delegate timer/hrtimer soft interrupt processing to a dedicated thread
on RT.
Timer and hrtimer soft interrupts are always processed in ksoftirqd
on RT enabled kernels. This can lead to high latencies when other
soft interrupts are delegated to ksoftirqd as well.
The separate thread allows to run them seperately under a RT
scheduling policy to reduce the latency overhead.
- Drivers:
* New drivers or extensions of existing drivers to support Renesas
RZ/V2H(P), Aspeed AST27XX, T-HEAD C900 and ATMEL sam9x7 interrupt
chips
* Support for multi-cluster GICs on MIPS.
MIPS CPUs can come with multiple CPU clusters, where each CPU cluster
has its own GIC (Generic Interrupt Controller). This requires to
access the GIC of a remote cluster through a redirect register block.
This is encapsulated into a set of helper functions to keep the
complexity out of the actual code paths which handle the GIC details.
* Support for encrypted guests in the ARM GICV3 ITS driver
The ITS page needs to be shared with the hypervisor and therefore
must be decrypted.
* Small cleanups and fixes all over the place
-----BEGIN PGP SIGNATURE-----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=JqxC
-----END PGP SIGNATURE-----
Merge tag 'irq-core-2024-11-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull interrupt subsystem updates from Thomas Gleixner:
"Tree wide:
- Make nr_irqs static to the core code and provide accessor functions
to remove existing and prevent future aliasing problems with local
variables or function arguments of the same name.
Core code:
- Prevent freeing an interrupt in the devres code which is not
managed by devres in the first place.
- Use seq_put_decimal_ull_width() for decimal values output in
/proc/interrupts which increases performance significantly as it
avoids parsing the format strings over and over.
- Optimize raising the timer and hrtimer soft interrupts by using the
'set bit only' variants instead of the combined version which
checks whether ksoftirqd should be woken up. The latter is a
pointless exercise as both soft interrupts are raised in the
context of the timer interrupt and therefore never wake up
ksoftirqd.
- Delegate timer/hrtimer soft interrupt processing to a dedicated
thread on RT.
Timer and hrtimer soft interrupts are always processed in ksoftirqd
on RT enabled kernels. This can lead to high latencies when other
soft interrupts are delegated to ksoftirqd as well.
The separate thread allows to run them seperately under a RT
scheduling policy to reduce the latency overhead.
Drivers:
- New drivers or extensions of existing drivers to support Renesas
RZ/V2H(P), Aspeed AST27XX, T-HEAD C900 and ATMEL sam9x7 interrupt
chips
- Support for multi-cluster GICs on MIPS.
MIPS CPUs can come with multiple CPU clusters, where each CPU
cluster has its own GIC (Generic Interrupt Controller). This
requires to access the GIC of a remote cluster through a redirect
register block.
This is encapsulated into a set of helper functions to keep the
complexity out of the actual code paths which handle the GIC
details.
- Support for encrypted guests in the ARM GICV3 ITS driver
The ITS page needs to be shared with the hypervisor and therefore
must be decrypted.
- Small cleanups and fixes all over the place"
* tag 'irq-core-2024-11-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (50 commits)
irqchip/riscv-aplic: Prevent crash when MSI domain is missing
genirq/proc: Use seq_put_decimal_ull_width() for decimal values
softirq: Use a dedicated thread for timer wakeups on PREEMPT_RT.
timers: Use __raise_softirq_irqoff() to raise the softirq.
hrtimer: Use __raise_softirq_irqoff() to raise the softirq
riscv: defconfig: Enable T-HEAD C900 ACLINT SSWI drivers
irqchip: Add T-HEAD C900 ACLINT SSWI driver
dt-bindings: interrupt-controller: Add T-HEAD C900 ACLINT SSWI device
irqchip/stm32mp-exti: Use of_property_present() for non-boolean properties
irqchip/mips-gic: Fix selection of GENERIC_IRQ_EFFECTIVE_AFF_MASK
irqchip/mips-gic: Prevent indirect access to clusters without CPU cores
irqchip/mips-gic: Multi-cluster support
irqchip/mips-gic: Setup defaults in each cluster
irqchip/mips-gic: Support multi-cluster in for_each_online_cpu_gic()
irqchip/mips-gic: Replace open coded online CPU iterations
genirq/irqdesc: Use str_enabled_disabled() helper in wakeup_show()
genirq/devres: Don't free interrupt which is not managed by devres
irqchip/gic-v3-its: Fix over allocation in itt_alloc_pool()
irqchip/aspeed-intc: Add AST27XX INTC support
dt-bindings: interrupt-controller: Add support for ASPEED AST27XX INTC
...
|
||
|
Linus Torvalds
|
f41dac3efb |
Performance events changes for v6.13:
- Uprobes:
- Add BPF session support (Jiri Olsa)
- Switch to RCU Tasks Trace flavor for better performance (Andrii Nakryiko)
- Massively increase uretprobe SMP scalability by SRCU-protecting
the uretprobe lifetime (Andrii Nakryiko)
- Kill xol_area->slot_count (Oleg Nesterov)
- Core facilities:
- Implement targeted high-frequency profiling by adding the ability
for an event to "pause" or "resume" AUX area tracing (Adrian Hunter)
- VM profiling/sampling:
- Correct perf sampling with guest VMs (Colton Lewis)
- New hardware support:
- x86/intel: Add PMU support for Intel ArrowLake-H CPUs (Dapeng Mi)
- Misc fixes and enhancements:
- x86/intel/pt: Fix buffer full but size is 0 case (Adrian Hunter)
- x86/amd: Warn only on new bits set (Breno Leitao)
- x86/amd/uncore: Avoid a false positive warning about snprintf
truncation in amd_uncore_umc_ctx_init (Jean Delvare)
- uprobes: Re-order struct uprobe_task to save some space (Christophe JAILLET)
- x86/rapl: Move the pmu allocation out of CPU hotplug (Kan Liang)
- x86/rapl: Clean up cpumask and hotplug (Kan Liang)
- uprobes: Deuglify xol_get_insn_slot/xol_free_insn_slot paths (Oleg Nesterov)
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=ItOT
-----END PGP SIGNATURE-----
Merge tag 'perf-core-2024-11-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull performance events updates from Ingo Molnar:
"Uprobes:
- Add BPF session support (Jiri Olsa)
- Switch to RCU Tasks Trace flavor for better performance (Andrii
Nakryiko)
- Massively increase uretprobe SMP scalability by SRCU-protecting
the uretprobe lifetime (Andrii Nakryiko)
- Kill xol_area->slot_count (Oleg Nesterov)
Core facilities:
- Implement targeted high-frequency profiling by adding the ability
for an event to "pause" or "resume" AUX area tracing (Adrian
Hunter)
VM profiling/sampling:
- Correct perf sampling with guest VMs (Colton Lewis)
New hardware support:
- x86/intel: Add PMU support for Intel ArrowLake-H CPUs (Dapeng Mi)
Misc fixes and enhancements:
- x86/intel/pt: Fix buffer full but size is 0 case (Adrian Hunter)
- x86/amd: Warn only on new bits set (Breno Leitao)
- x86/amd/uncore: Avoid a false positive warning about snprintf
truncation in amd_uncore_umc_ctx_init (Jean Delvare)
- uprobes: Re-order struct uprobe_task to save some space
(Christophe JAILLET)
- x86/rapl: Move the pmu allocation out of CPU hotplug (Kan Liang)
- x86/rapl: Clean up cpumask and hotplug (Kan Liang)
- uprobes: Deuglify xol_get_insn_slot/xol_free_insn_slot paths (Oleg
Nesterov)"
* tag 'perf-core-2024-11-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (32 commits)
perf/core: Correct perf sampling with guest VMs
perf/x86: Refactor misc flag assignments
perf/powerpc: Use perf_arch_instruction_pointer()
perf/core: Hoist perf_instruction_pointer() and perf_misc_flags()
perf/arm: Drop unused functions
uprobes: Re-order struct uprobe_task to save some space
perf/x86/amd/uncore: Avoid a false positive warning about snprintf truncation in amd_uncore_umc_ctx_init
perf/x86/intel: Do not enable large PEBS for events with aux actions or aux sampling
perf/x86/intel/pt: Add support for pause / resume
perf/core: Add aux_pause, aux_resume, aux_start_paused
perf/x86/intel/pt: Fix buffer full but size is 0 case
uprobes: SRCU-protect uretprobe lifetime (with timeout)
uprobes: allow put_uprobe() from non-sleepable softirq context
perf/x86/rapl: Clean up cpumask and hotplug
perf/x86/rapl: Move the pmu allocation out of CPU hotplug
uprobe: Add support for session consumer
uprobe: Add data pointer to consumer handlers
perf/x86/amd: Warn only on new bits set
uprobes: fold xol_take_insn_slot() into xol_get_insn_slot()
uprobes: kill xol_area->slot_count
...
|
||
|
Linus Torvalds
|
02b2f1a7b8 |
This update includes the following changes:
API:
- Add sig driver API.
- Remove signing/verification from akcipher API.
- Move crypto_simd_disabled_for_test to lib/crypto.
- Add WARN_ON for return values from driver that indicates memory corruption.
Algorithms:
- Provide crc32-arch and crc32c-arch through Crypto API.
- Optimise crc32c code size on x86.
- Optimise crct10dif on arm/arm64.
- Optimise p10-aes-gcm on powerpc.
- Optimise aegis128 on x86.
- Output full sample from test interface in jitter RNG.
- Retry without padata when it fails in pcrypt.
Drivers:
- Add support for Airoha EN7581 TRNG.
- Add support for STM32MP25x platforms in stm32.
- Enable iproc-r200 RNG driver on BCMBCA.
- Add Broadcom BCM74110 RNG driver.
-----BEGIN PGP SIGNATURE-----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=T8pa
-----END PGP SIGNATURE-----
Merge tag 'v6.13-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
"API:
- Add sig driver API
- Remove signing/verification from akcipher API
- Move crypto_simd_disabled_for_test to lib/crypto
- Add WARN_ON for return values from driver that indicates memory
corruption
Algorithms:
- Provide crc32-arch and crc32c-arch through Crypto API
- Optimise crc32c code size on x86
- Optimise crct10dif on arm/arm64
- Optimise p10-aes-gcm on powerpc
- Optimise aegis128 on x86
- Output full sample from test interface in jitter RNG
- Retry without padata when it fails in pcrypt
Drivers:
- Add support for Airoha EN7581 TRNG
- Add support for STM32MP25x platforms in stm32
- Enable iproc-r200 RNG driver on BCMBCA
- Add Broadcom BCM74110 RNG driver"
* tag 'v6.13-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (112 commits)
crypto: marvell/cesa - fix uninit value for struct mv_cesa_op_ctx
crypto: cavium - Fix an error handling path in cpt_ucode_load_fw()
crypto: aesni - Move back to module_init
crypto: lib/mpi - Export mpi_set_bit
crypto: aes-gcm-p10 - Use the correct bit to test for P10
hwrng: amd - remove reference to removed PPC_MAPLE config
crypto: arm/crct10dif - Implement plain NEON variant
crypto: arm/crct10dif - Macroify PMULL asm code
crypto: arm/crct10dif - Use existing mov_l macro instead of __adrl
crypto: arm64/crct10dif - Remove remaining 64x64 PMULL fallback code
crypto: arm64/crct10dif - Use faster 16x64 bit polynomial multiply
crypto: arm64/crct10dif - Remove obsolete chunking logic
crypto: bcm - add error check in the ahash_hmac_init function
crypto: caam - add error check to caam_rsa_set_priv_key_form
hwrng: bcm74110 - Add Broadcom BCM74110 RNG driver
dt-bindings: rng: add binding for BCM74110 RNG
padata: Clean up in padata_do_multithreaded()
crypto: inside-secure - Fix the return value of safexcel_xcbcmac_cra_init()
crypto: qat - Fix missing destroy_workqueue in adf_init_aer()
crypto: rsassa-pkcs1 - Reinstate support for legacy protocols
...
|
||
|
Rob Herring (Arm)
|
a21b2eb7cf
|
arm: dts: spear13xx: Remove unused and undocumented "pl022,slave-tx-disable" property
Remove "pl022,slave-tx-disable" property which is both unused in the kernel and undocumented. Most likely they are leftovers from downstream. Signed-off-by: Rob Herring (Arm) <robh@kernel.org> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Link: https://lore.kernel.org/r/20241115193835.3623725-1-robh@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Arnd Bergmann
|
44a50de51b |
Allwinner fixes for 6.12
- Fix DCDC5 voltage range on Cubieboard 4 -----BEGIN PGP SIGNATURE----- iQJCBAABCgAsFiEE2nN1m/hhnkhOWjtHOJpUIZwPJDAFAmcrcLcOHHdlbnNAY3Np ZS5vcmcACgkQOJpUIZwPJDCodw//TZdq7uDs2QVL07V9h/gujlB13Po5Z9nOOSDa rgFhGnZ3iEFZ2AJw8bivT8oj4gQJ1V+N1Nvh4rZOZgOMCHVBZ8Zk2h+6sGeBjmAw sLITKvMAdZ3zuUNdS4dAAEJncDhTBQTpOdxBBH5RvCXBWr4Pf4Lvib26M5dxVQGc 5Zuh9qm6P4s4yHt37gJayMLPVPEqIHeVy/TKXpws9Anb8BXrGxdwJnWEv4qAeaaO NcNmV59KVJQyu/n/bvMT2krgPaVA7ghKObQ/FA0RfCwD8jT48NEC6bvQ9a+XWSk3 PwskuEnw0v2ve0IIz3+t2resE9006cE30UctSk7oA1iG3AfFKQzbKbqS2rk5506I VwyvZ2wkcBtg8rYpPg0uLMUpwgH3LEhNygjgOpcxc5n71pzffl1t68HYY1Fy+YV6 LOi6mytgNGXFwbRagp1O3427GlGhO0D+1zyA2oBBjCcbuEPuTsDhlxXK9fBL6TkA uy/T+n0qZhT+jWsHgAZhcQUjqCeh4lsfGsg0C90kohtEZQhvOO6unHRFU5att88e WZy2svPBx5293WapUreD5R3ue6lYl6mjVTQN5oSLbs73vhOShDz2T6lALuxSovHf ps8gMK43KptHcC/zS+oV4qwaaXOtDTCMv1e5MvIG7PZ1TdgAy6lt+kRNce71org/ DaCt3fQ= =pgqN -----END PGP SIGNATURE----- Merge tag 'sunxi-fixes-for-6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into soc/dt Allwinner fixes for 6.12 - Fix DCDC5 voltage range on Cubieboard 4 * tag 'sunxi-fixes-for-6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: ARM: dts: cubieboard4: Fix DCDC5 regulator constraints |
||
|
Linus Torvalds
|
ba1f9c8fe3 |
arm64 updates for 6.13:
* Support for running Linux in a protected VM under the Arm Confidential
Compute Architecture (CCA)
* Guarded Control Stack user-space support. Current patches follow the
x86 ABI of implicitly creating a shadow stack on clone(). Subsequent
patches (already on the list) will add support for clone3() allowing
finer-grained control of the shadow stack size and placement from libc
* AT_HWCAP3 support (not running out of HWCAP2 bits yet but we are
getting close with the upcoming dpISA support)
* Other arch features:
- In-kernel use of the memcpy instructions, FEAT_MOPS (previously only
exposed to user; uaccess support not merged yet)
- MTE: hugetlbfs support and the corresponding kselftests
- Optimise CRC32 using the PMULL instructions
- Support for FEAT_HAFT enabling ARCH_HAS_NONLEAF_PMD_YOUNG
- Optimise the kernel TLB flushing to use the range operations
- POE/pkey (permission overlays): further cleanups after bringing the
signal handler in line with the x86 behaviour for 6.12
* arm64 perf updates:
- Support for the NXP i.MX91 PMU in the existing IMX driver
- Support for Ampere SoCs in the Designware PCIe PMU driver
- Support for Marvell's 'PEM' PCIe PMU present in the 'Odyssey' SoC
- Support for Samsung's 'Mongoose' CPU PMU
- Support for PMUv3.9 finer-grained userspace counter access control
- Switch back to platform_driver::remove() now that it returns 'void'
- Add some missing events for the CXL PMU driver
* Miscellaneous arm64 fixes/cleanups:
- Page table accessors cleanup: type updates, drop unused macros,
reorganise arch_make_huge_pte() and clean up pte_mkcont(), sanity
check addresses before runtime P4D/PUD folding
- Command line override for ID_AA64MMFR0_EL1.ECV (advertising the
FEAT_ECV for the generic timers) allowing Linux to boot with
firmware deployments that don't set SCTLR_EL3.ECVEn
- ACPI/arm64: tighten the check for the array of platform timer
structures and adjust the error handling procedure in
gtdt_parse_timer_block()
- Optimise the cache flush for the uprobes xol slot (skip if no
change) and other uprobes/kprobes cleanups
- Fix the context switching of tpidrro_el0 when kpti is enabled
- Dynamic shadow call stack fixes
- Sysreg updates
- Various arm64 kselftest improvements
-----BEGIN PGP SIGNATURE-----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=wDot
-----END PGP SIGNATURE-----
Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Catalin Marinas:
- Support for running Linux in a protected VM under the Arm
Confidential Compute Architecture (CCA)
- Guarded Control Stack user-space support. Current patches follow the
x86 ABI of implicitly creating a shadow stack on clone(). Subsequent
patches (already on the list) will add support for clone3() allowing
finer-grained control of the shadow stack size and placement from
libc
- AT_HWCAP3 support (not running out of HWCAP2 bits yet but we are
getting close with the upcoming dpISA support)
- Other arch features:
- In-kernel use of the memcpy instructions, FEAT_MOPS (previously
only exposed to user; uaccess support not merged yet)
- MTE: hugetlbfs support and the corresponding kselftests
- Optimise CRC32 using the PMULL instructions
- Support for FEAT_HAFT enabling ARCH_HAS_NONLEAF_PMD_YOUNG
- Optimise the kernel TLB flushing to use the range operations
- POE/pkey (permission overlays): further cleanups after bringing
the signal handler in line with the x86 behaviour for 6.12
- arm64 perf updates:
- Support for the NXP i.MX91 PMU in the existing IMX driver
- Support for Ampere SoCs in the Designware PCIe PMU driver
- Support for Marvell's 'PEM' PCIe PMU present in the 'Odyssey' SoC
- Support for Samsung's 'Mongoose' CPU PMU
- Support for PMUv3.9 finer-grained userspace counter access
control
- Switch back to platform_driver::remove() now that it returns
'void'
- Add some missing events for the CXL PMU driver
- Miscellaneous arm64 fixes/cleanups:
- Page table accessors cleanup: type updates, drop unused macros,
reorganise arch_make_huge_pte() and clean up pte_mkcont(), sanity
check addresses before runtime P4D/PUD folding
- Command line override for ID_AA64MMFR0_EL1.ECV (advertising the
FEAT_ECV for the generic timers) allowing Linux to boot with
firmware deployments that don't set SCTLR_EL3.ECVEn
- ACPI/arm64: tighten the check for the array of platform timer
structures and adjust the error handling procedure in
gtdt_parse_timer_block()
- Optimise the cache flush for the uprobes xol slot (skip if no
change) and other uprobes/kprobes cleanups
- Fix the context switching of tpidrro_el0 when kpti is enabled
- Dynamic shadow call stack fixes
- Sysreg updates
- Various arm64 kselftest improvements
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (168 commits)
arm64: tls: Fix context-switching of tpidrro_el0 when kpti is enabled
kselftest/arm64: Try harder to generate different keys during PAC tests
kselftest/arm64: Don't leak pipe fds in pac.exec_sign_all()
arm64/ptrace: Clarify documentation of VL configuration via ptrace
kselftest/arm64: Corrupt P0 in the irritator when testing SSVE
acpi/arm64: remove unnecessary cast
arm64/mm: Change protval as 'pteval_t' in map_range()
kselftest/arm64: Fix missing printf() argument in gcs/gcs-stress.c
kselftest/arm64: Add FPMR coverage to fp-ptrace
kselftest/arm64: Expand the set of ZA writes fp-ptrace does
kselftets/arm64: Use flag bits for features in fp-ptrace assembler code
kselftest/arm64: Enable build of PAC tests with LLVM=1
kselftest/arm64: Check that SVCR is 0 in signal handlers
selftests/mm: Fix unused function warning for aarch64_write_signal_pkey()
kselftest/arm64: Fix printf() compiler warnings in the arm64 syscall-abi.c tests
kselftest/arm64: Fix printf() warning in the arm64 MTE prctl() test
kselftest/arm64: Fix printf() compiler warnings in the arm64 fp tests
kselftest/arm64: Fix build with stricter assemblers
arm64/scs: Drop unused prototype __pi_scs_patch_vmlinux()
arm64/scs: Deal with 64-bit relative offsets in FDE frames
...
|
||
|
Linus Torvalds
|
82339c4911 |
sanitize xattr and io_uring interactions with it,
add *xattrat() syscalls, sanitize struct filename handling in there. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> -----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQQqUNBr3gm4hGXdBJlZ7Krx/gZQ6wUCZzdj4gAKCRBZ7Krx/gZQ 6/02AQC8ndn9i1wLGRb5DdZYGNWUDhXCdPrZCF2nyvU2swCIPwEAm1H5F/bxBXeT 6qCLHThVw4KTJOT2aDY03ELrxbi8Vg4= =35Oj -----END PGP SIGNATURE----- Merge tag 'pull-xattr' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull xattr updates from Al Viro: "Sanitize xattr and io_uring interactions with it, add *xattrat() syscalls, sanitize struct filename handling in there" * tag 'pull-xattr' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: xattr: remove redundant check on variable err fs/xattr: add *at family syscalls new helpers: file_removexattr(), filename_removexattr() new helpers: file_listxattr(), filename_listxattr() replace do_getxattr() with saner helpers. replace do_setxattr() with saner helpers. new helper: import_xattr_name() fs: rename struct xattr_ctx to kernel_xattr_ctx xattr: switch to CLASS(fd) io_[gs]etxattr_prep(): just use getname() io_uring: IORING_OP_F[GS]ETXATTR is fine with REQ_F_FIXED_FILE getname_maybe_null() - the third variant of pathname copy-in teach filename_lookup() to treat NULL filename as "" |
||
|
Linus Torvalds
|
0f25f0e4ef |
the bulk of struct fd memory safety stuff
Making sure that struct fd instances are destroyed in the same
scope where they'd been created, getting rid of reassignments
and passing them by reference, converting to CLASS(fd{,_pos,_raw}).
We are getting very close to having the memory safety of that stuff
trivial to verify.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQqUNBr3gm4hGXdBJlZ7Krx/gZQ6wUCZzdikAAKCRBZ7Krx/gZQ
69nJAQCmbQHK3TGUbQhOw6MJXOK9ezpyEDN3FZb4jsu38vTIdgEA6OxAYDO2m2g9
CN18glYmD3wRyU6Bwl4vGODouSJvDgA=
=gVH3
-----END PGP SIGNATURE-----
Merge tag 'pull-fd' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull 'struct fd' class updates from Al Viro:
"The bulk of struct fd memory safety stuff
Making sure that struct fd instances are destroyed in the same scope
where they'd been created, getting rid of reassignments and passing
them by reference, converting to CLASS(fd{,_pos,_raw}).
We are getting very close to having the memory safety of that stuff
trivial to verify"
* tag 'pull-fd' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (28 commits)
deal with the last remaing boolean uses of fd_file()
css_set_fork(): switch to CLASS(fd_raw, ...)
memcg_write_event_control(): switch to CLASS(fd)
assorted variants of irqfd setup: convert to CLASS(fd)
do_pollfd(): convert to CLASS(fd)
convert do_select()
convert vfs_dedupe_file_range().
convert cifs_ioctl_copychunk()
convert media_request_get_by_fd()
convert spu_run(2)
switch spufs_calls_{get,put}() to CLASS() use
convert cachestat(2)
convert do_preadv()/do_pwritev()
fdget(), more trivial conversions
fdget(), trivial conversions
privcmd_ioeventfd_assign(): don't open-code eventfd_ctx_fdget()
o2hb_region_dev_store(): avoid goto around fdget()/fdput()
introduce "fd_pos" class, convert fdget_pos() users to it.
fdget_raw() users: switch to CLASS(fd_raw)
convert vmsplice() to CLASS(fd)
...
|
||
|
Linus Torvalds
|
4a5df37964 |
10 hotfixes, 7 of which are cc:stable. All singletons, please see the
changelogs for details. -----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZzkr6AAKCRDdBJ7gKXxA jsb2AP9HCOI4w9rQTmBdnaefXytS7fiiPq+LVNpjJ0NGXX2FSgD/e1NM0wi8KevQ npcvlqTcXtRSJvYNF904aTNyDn+Kuw0= =KFGY -----END PGP SIGNATURE----- Merge tag 'mm-hotfixes-stable-2024-11-16-15-33' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull hotfixes from Andrew Morton: "10 hotfixes, 7 of which are cc:stable. All singletons, please see the changelogs for details" * tag 'mm-hotfixes-stable-2024-11-16-15-33' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: mm: revert "mm: shmem: fix data-race in shmem_getattr()" ocfs2: uncache inode which has failed entering the group mm: fix NULL pointer dereference in alloc_pages_bulk_noprof mm, doc: update read_ahead_kb for MADV_HUGEPAGE fs/proc/task_mmu: prevent integer overflow in pagemap_scan_get_args() sched/task_stack: fix object_is_on_stack() for KASAN tagged pointers crash, powerpc: default to CRASH_DUMP=n on PPC_BOOK3S_32 mm/mremap: fix address wraparound in move_page_tables() tools/mm: fix compile error mm, swap: fix allocation and scanning race with swapoff |
||
|
Linus Torvalds
|
b84eeed05a |
ARM fixes for v6.12
- Fix kernel mapping for XIP kernels - Fix SMP support for XIP kernels - Fix complication corner case with CFI - Fix a typo in nommu code - Fix cacheflush syscall when PAN is enabled on LPAE platforms -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEuNNh8scc2k/wOAE+9OeQG+StrGQFAmc5F/UACgkQ9OeQG+St rGQBRg/+P9YMx0MZTV8y5B92yAzOk28QW303f8PWzoTXMiQ1nhMFUhk/TFMaeSxs 6CJfQ+W5S+N9X1hG8XAlBPZruX5GWKXScS1By4J/sBwTXmIomnkeL6SwQRULF63v C/dcFWd9avKo2XnZIhQ8mduczR17MoagXxq6kpLvgaLJ6C/b6XJQ+SwqtuGXuJtz NpPrU0hSLOZdfGHQC6jyIhWObgNEX+Li8EZorynOAYiy90sYUgpffAsL/qWUV+cM VF/cK+BYkvShxChj6rvcv7vlbGBUaV2DhRIdXe4AxD2hkX3cUmLG+10YQ7pq/gb0 722w7ZsBRXXFnlKle3vPzf4upWdMJEQ1SM3z6nYcZ8JTK9rGIxvAlt4PhFc6iw/v 2AF3WSXhbdRg1+6kK5Q/fsga40BtXbL/3pS/5Q57MZfrmF/0PYVdFRvKJQuRVvxC +FiWTDKuR7yTSK9/5hx+2W6WDjuDvoFeMBo4n9GyqdajIpi13dUminE/KdCTuz57 OefDS7SGfUlnWj6JAUbF+hg0/Loij5KldZbmQDWLeU2/LTx3UMUMNZ6RLATQ33tT +aMnrxwEd2qPXNhlC/hAz/PR5tt14w2jlEK+1x4S5siW6vi4+8F6KfcycZFzkVHI gqRNhG//mmpnCzK7FU5q0Od0GrM1zpYhhnAXm92QPP4zJp1R0s8= =yhjm -----END PGP SIGNATURE----- Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rmk/linux Pull ARM fixes from Russell King: - Fix kernel mapping for XIP kernels - Fix SMP support for XIP kernels - Fix complication corner case with CFI - Fix a typo in nommu code - Fix cacheflush syscall when PAN is enabled on LPAE platforms * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rmk/linux: ARM: fix cacheflush with PAN ARM: 9435/1: ARM/nommu: Fix typo "absence" ARM: 9434/1: cfi: Fix compilation corner case ARM: 9420/1: smp: Fix SMP for xip kernels ARM: 9419/1: mm: Fix kernel memory mapping for xip kernels |
||
|
Ard Biesheuvel
|
e7c1d1c9b2 |
crypto: arm/crct10dif - Implement plain NEON variant
The CRC-T10DIF algorithm produces a 16-bit CRC, and this is reflected in the folding coefficients, which are also only 16 bits wide. This means that the polynomial multiplications involving these coefficients can be performed using 8-bit long polynomial multiplication (8x8 -> 16) in only a few steps, and this is an instruction that is part of the base NEON ISA, which is all most real ARMv7 cores implement. (The 64-bit PMULL instruction is part of the crypto extensions, which are only implemented by 64-bit cores) The final reduction is a bit more involved, but we can delegate that to the generic CRC-T10DIF implementation after folding the entire input into a 16 byte vector. This results in a speedup of around 6.6x on Cortex-A72 running in 32-bit mode. On Cortex-A8 (BeagleBone White), the results are substantially better than that, but not sufficiently reproducible (with tcrypt) to quote a number here. Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> |
||
|
Ard Biesheuvel
|
802d8d110c |
crypto: arm/crct10dif - Macroify PMULL asm code
To allow an alternative version to be created of the PMULL based CRC-T10DIF algorithm, turn the bulk of it into a macro, except for the final reduction, which will only be used by the existing version. Reviewed-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> |
||
|
Ard Biesheuvel
|
fcf27785ae |
crypto: arm/crct10dif - Use existing mov_l macro instead of __adrl
Reviewed-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> |
||
|
Dave Vasilevsky
|
31daa34315 |
crash, powerpc: default to CRASH_DUMP=n on PPC_BOOK3S_32
Fixes boot failures on 6.9 on PPC_BOOK3S_32 machines using Open Firmware.
On these machines, the kernel refuses to boot from non-zero
PHYSICAL_START, which occurs when CRASH_DUMP is on.
Since most PPC_BOOK3S_32 machines boot via Open Firmware, it should
default to off for them. Users booting via some other mechanism can still
turn it on explicitly.
Does not change the default on any other architectures for the
time being.
Link: https://lkml.kernel.org/r/20240917163720.1644584-1-dave@vasilevsky.ca
Fixes:
|
||
|
Colton Lewis
|
e33ed362cf |
perf/arm: Drop unused functions
For ARM's implementation, perf_instruction_pointer() and perf_misc_flags() are equivalent to the generic versions in include/linux/perf_event.h so arch/arm doesn't need to provide its own versions. Drop them here. Signed-off-by: Colton Lewis <coltonlewis@google.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Reviewed-by: Oliver Upton <oliver.upton@linux.dev> Acked-by: Will Deacon <will@kernel.org> Link: https://lore.kernel.org/r/20241113190156.2145593-2-coltonlewis@google.com |
||
|
Arnd Bergmann
|
2b7fda346e |
Microchip AT91 device tree updates for v6.13
It contains: - device tree support for the Microchip SAM9X7 SoC and the Microchip SAM9X75 Curiosity board - enable power monitor support for SAM9X60-EK, SAMA5D2-ICP, SAMA7G45 Curiosity, SAMA7G5-EK boards - updates the uart nodes with missing properties - device tree cleanups -----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQTsZ8eserC1pmhwqDmejrg/N2X7/QUCZyuq2wAKCRCejrg/N2X7 /SuVAP9pziV3tFoypFQoVttvsJarlXhPh8d5bK6zB/Q/gBQeuAD/aWPbfFBvSOl4 H6FWMj+ap1iLbNy8dIYqDX/NkwH43w0= =PiDc -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmc1N90ACgkQYKtH/8kJ UieRJQ//bEZBz+12tW2DHuxIWGIdjorHls9PcAuAekgSEgMsrBXMt9F4QZnLIjP8 8GeKr4drahWGfyXv3hvqwr39QhCFuFq6d/hlW23mmOcj3SFxhIvLdknLzRL3yMvk WhcUywBnDRnvuntWKOOmqhp2C/stWvsp1Jtrsq2R1Y3+wjH2HyGXwU6S7XkSlXX9 4Am9sqkYl0r365los8zjnk1fTV29wxHN2tMN00T2wVACtxo+pU1IsfurA7eu0ahQ Q/a+jIZyTk4cO6HtcPzH9ZhdlBSmJQPaEskz59Lp03kyiE+iENBE2l3CxTXielQe nhJsHz33R/jNJJMrTACqAyT2awjfLcnW9+vCvjEFhrhnmSmAQKVJTyQMOrZyhyHo o3Mgtq5ZhzZHGWeBChraVCIlMswbJp1uBUP9KFMzgroYEo0zOYOTwjN7QzPG/6mj DjAHpAw9ZKKa4gc35h4r9/iT/XUZ09TRnilHiNlrPGc/UTXivNYlvn5xsXMhaTQy JE9APKKfOfZ/GxL7avzfgWvfpypWgQC/ZvfJ796YyOKtYt3Al7VzDv2IdZGSg4N6 2OkYA/EHHvsKHjokg3tTzOXPtSREcpiberkl7mf8m7oJgZb8a28r0XqU2gm/WX1C 9E4RaPMkPVmNs3V4ACh+sHUNwtXHO0zUYqbpTvvgmULNvfnNpPU= =Gfl0 -----END PGP SIGNATURE----- Merge tag 'at91-dt-6.13' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into soc/dt Microchip AT91 device tree updates for v6.13 It contains: - device tree support for the Microchip SAM9X7 SoC and the Microchip SAM9X75 Curiosity board - enable power monitor support for SAM9X60-EK, SAMA5D2-ICP, SAMA7G45 Curiosity, SAMA7G5-EK boards - updates the uart nodes with missing properties - device tree cleanups * tag 'at91-dt-6.13' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux: ARM: dts: microchip: sam9x75_curiosity: add sam9x75 curiosity board dt-bindings: arm: add sam9x75 curiosity board ARM: dts: at91: sam9x7: add device tree for SoC ARM: dts: microchip: Rename LED sub nodes name ARM: dts: microchip: Rename the pmic node ARM: dts: microchip: Rename the eeprom nodename ARM: dts: microchip: sama7g5ek: Add power monitor support ARM: dts: microchip: sama7g54_curiosity: Add power monitor support ARM: dts: microchip: sama5d2_icp: Add power monitor support ARM: dts: microchip: sam9x60ek: Add power monitor support ARM: dts: microchip: Unify rng node names ARM: dts: microchip: Add trng labels for all at91 SoCs ARM: dts: microchip: sam9x60: Add missing property atmel,usart-mode Link: https://lore.kernel.org/r/20241113182050.2176500-2-claudiu.beznea@tuxon.dev Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Arnd Bergmann
|
de6dff2090 |
Microchip AT91 defconfig updates for v6.13
It contains: - enable PAC1934 power monitor driver for the Microchip AT91 defconfigs -----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQTsZ8eserC1pmhwqDmejrg/N2X7/QUCZynPXAAKCRCejrg/N2X7 /Up+AP96Yz9vhsiCf91K4KetECyoZ66K0ESLIs8kzJd4HTPJKgEA25xpSu24Usz7 uSsNYEdfSHosJ+KUFD0GPZ+EEwTAPg4= =Qe4u -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmc1Hv4ACgkQYKtH/8kJ UifeKBAAnsb3W/Pqrd4G9+J8ayYYYOeYeiPS7gbaPRa4BYoGxJxt714odONbWr/U Vcb2qe680MQ0CCiuM9b3KpruVSNVE4wMMe7tGqF3id99/zE3nd5ZFaPyWvqeaP5o dsvnP3IIPsAiozKEH6fsyNnZwtjHA6P4rFyVb96DFEgKo5fUleMYnKjR2RK9KF67 v+2H8xZjLQP9EbHh4hLyJQwme3how5Ej6o5od+VO7ffq4nVgFDgvSvkWNMabR6OR 48fJtCxd72onxP0gOxrTwLvTlsNdlUndlshElwZc9wDYww2EJlwo5cPDasx4YKBo z0XmCOq0+YIlyVENAsdPkjpT0gQfhI84exqswOKwnh4jNK+Q2Vhfdoo0I7q+maPB Mgjzzs6xD7ZbyCEEpRaDJrKZMxdNLyExDPzz+0lkpB5Y13PdhH45Rc7YsRLVO6TC rFDPArfp8jKIPy50JBxR9rtUuDTNFFHZ59C1DKJ98ZqT9OMP/0JngKJ7dI4zjANn gG/J6/ncBM+HjKsJa8h78ZM6S/Zk+6saCw6pjUrEb2wBIMd43pmveP3l4DVlKZFz Duviy5lPSfuyUZ5g0Z3uuPJcAkC91tAFq7J4P2e0MJXi5sa2KGZodDx613C81tmy zA14OO/cB+06KWUhltOxS6uEKtVUXvqCrckEplguh2ZSR+HE30c= =iuEN -----END PGP SIGNATURE----- Merge tag 'at91-defconfig-6.13' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into soc/defconfig Microchip AT91 defconfig updates for v6.13 It contains: - enable PAC1934 power monitor driver for the Microchip AT91 defconfigs * tag 'at91-defconfig-6.13' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux: ARM: configs: at91: enable PAC1934 driver as module Link: https://lore.kernel.org/r/20241113182050.2176500-1-claudiu.beznea@tuxon.dev Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Linus Walleij
|
93ee385254 |
ARM: 9431/1: mm: Pair atomic_set_release() with _read_acquire()
The code for syncing vmalloc memory PGD pointers is using
atomic_read() in pair with atomic_set_release() but the
proper pairing is atomic_read_acquire() paired with
atomic_set_release().
This is done to clearly instruct the compiler to not
reorder the memcpy() or similar calls inside the section
so that we do not observe changes to init_mm. memcpy()
calls should be identified by the compiler as having
unpredictable side effects, but let's try to be on the
safe side.
Cc: stable@vger.kernel.org
Fixes:
|
||
|
Linus Walleij
|
44e9a3bb76 |
ARM: 9430/1: entry: Do a dummy read from VMAP shadow
When switching task, in addition to a dummy read from the new
VMAP stack, also do a dummy read from the VMAP stack's
corresponding KASAN shadow memory to sync things up in
the new MM context.
Cc: stable@vger.kernel.org
Fixes:
|
||
|
Linus Walleij
|
d6e6a74d4c |
ARM: 9429/1: ioremap: Sync PGDs for VMALLOC shadow
When sync:ing the VMALLOC area to other CPUs, make sure to also
sync the KASAN shadow memory for the VMALLOC area, so that we
don't get stale entries for the shadow memory in the top level PGD.
Since we are now copying PGDs in two instances, create a helper
function named memcpy_pgd() to do the actual copying, and
create a helper to map the addresses of VMALLOC_START and
VMALLOC_END into the corresponding shadow memory.
Co-developed-by: Melon Liu <melon1335@163.com>
Cc: stable@vger.kernel.org
Fixes:
|
||
|
Russell King (Oracle)
|
ca29cfcc4a |
ARM: fix cacheflush with PAN
It seems that the cacheflush syscall got broken when PAN for LPAE was
implemented. User access was not enabled around the cache maintenance
instructions, causing them to fault.
Fixes:
|
||
|
WangYuli
|
fb5af7d540 |
ARM: 9435/1: ARM/nommu: Fix typo "absence"
There is a spelling mistake of 'absense' in comments which should be 'absence'. Link: https://lore.kernel.org/all/fca25741-c89f-43ea-95af-5e3232d513fc@arm.com/ Signed-off-by: WangYuli <wangyuli@uniontech.com> Reviewed-by: Vladimir Murzin <vladimir.murzin@arm.com> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> |
||
|
Linus Walleij
|
4aea16b7cf |
ARM: 9434/1: cfi: Fix compilation corner case
When enabling expert mode CONFIG_EXPERT and using that power user mode to disable the branch prediction hardening !CONFIG_HARDEN_BRANCH_PREDICTOR, the assembly linker in CLANG notices that some assembly in proc-v7.S does not have corresponding C call sites, i.e. the prototypes in proc-v7-bugs.c are enclosed in ifdef CONFIG_HARDEN_BRANCH_PREDICTOR so this assembly: SYM_TYPED_FUNC_START(cpu_v7_smc_switch_mm) SYM_TYPED_FUNC_START(cpu_v7_hvc_switch_mm) Results in: ld.lld: error: undefined symbol: __kcfi_typeid_cpu_v7_smc_switch_mm >>> referenced by proc-v7.S:94 (.../arch/arm/mm/proc-v7.S:94) >>> arch/arm/mm/proc-v7.o:(.text+0x108) in archive vmlinux.a ld.lld: error: undefined symbol: __kcfi_typeid_cpu_v7_hvc_switch_mm >>> referenced by proc-v7.S:105 (.../arch/arm/mm/proc-v7.S:105) >>> arch/arm/mm/proc-v7.o:(.text+0x124) in archive vmlinux.a Fix this by adding an additional requirement that CONFIG_HARDEN_BRANCH_PREDICTOR has to be enabled to compile these assembly calls. Closes: https://lore.kernel.org/oe-kbuild-all/202411041456.ZsoEiD7T-lkp@intel.com/ Reported-by: kernel test robot <lkp@intel.com> Reviewed-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> |
||
|
Arnd Bergmann
|
9c6cb03775 |
i.MX SoC changes for 6.13:
- A change from Andrew Davis to convert i.MX6 PM code to use new sys-off API -----BEGIN PGP SIGNATURE----- iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAmcoe/MUHHNoYXduZ3Vv QGtlcm5lbC5vcmcACgkQUFdYWoewfM58Ogf/Z3+r8M479tEnIkCMMy64Fpl7KlTJ LvEZGChV7kaqTrwcE5HzW1sVbccNZbBVtXICjOfyleRI251dsxr3/c0DcduWxNM1 Ss10x7yavWReJUCscLDiIDMKA6IIGR6z3V5BJUWj43iVdImIGWLgoJwbbWwKWn07 qoc+S38gcws5JUSZtahEEIaOv98x8olOrFxKV5x0zMYK7tvD83rpmvxFFJFnbiXN DlPykFvIY42+G1QpHCiND0JzPpLAN9XZE62Rpt045OMKswJFTJR6+Wo0cpsCYIJE COOyTukXW1xgnYtsP2YL/Wpj40hk+bIr7WAu6GnT2ES3OIjwQNgyFsjyqA== =Q548 -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmcz01oACgkQYKtH/8kJ UifZ4A//bf7ctofN4CBUtdwpS4FeQKgwVQzs4naI5t6idP2EmWSfPBeVOxwKpTB9 6bKSuK2iVq3qf+o7rQC4RasHDylzGN442hVOXVs5h0rIYjQ3k5DXsMCk7VYzO+qZ 8ycx5hFr6j5XNCweMyVc/QVITiwo4iIUKJ89xa1fvHyvB5zgB5vyTA0oyUFnyp2w Rv1c/9ovL3A5+lunTO35gpgW6qHf12Z4r1ihdMIpRy4JmHjwzXzBPS43AkBcC5ed qb8G4EHjFO1xcFuNcumvbvSZqGgsoUBiDS0kvWuvpRjAsmRNKb56XN7LEbTVvl0h Fgi5mnstWewpomswo7vEhT/PytqCB3+klkaozkXYjmParLrKXhU6k2+xuBfgn0ge VaZnijGyorV8cRmDFka2UDwyBdFmDrFHELiP35NWvHaKIfnulJQ3TrFKwWf4M8a+ F3kPcp0faSJusFebm8YDIXJPkeG3MhcT7KyXFwhJTpXtBMJgqtxtttwT4VkRld0l gCC8FJvTX+YjqJ8wPz3/HEBxBnvbgg5jotOTdcS3Z/3ooLCVONMlU+hDQ0RFCxSe BFuYYkyNA5wvknWMgv8W024q6VVRut5quwFdgMibAcK1EH31o4V8USQKGT7h9vpJ cPkdIxCys4FJkrN54wTMfw16KvqOHhWFsIqXdPWr74gwKvlXkp4= =IX9G -----END PGP SIGNATURE----- Merge tag 'imx-soc-6.13' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/arm i.MX SoC changes for 6.13: - A change from Andrew Davis to convert i.MX6 PM code to use new sys-off API * tag 'imx-soc-6.13' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: ARM: imx: Switch to new sys-off handler API Link: https://lore.kernel.org/r/20241104090055.1881860-2-shawnguo2@yeah.net Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Arnd Bergmann
|
d95fa0fab7 |
ARM: Zynq SoC changes for 6.13
- cleanup zynq_slcr_init() -----BEGIN PGP SIGNATURE----- iF0EABECAB0WIQQbPNTMvXmYlBPRwx7KSWXLKUoMIQUCZyTOzQAKCRDKSWXLKUoM If9PAJ0SCeGdCLcVaofKgO1nHu5lrX8a8wCgjFyg0qiNIEoGybncVg2FAdcHmgQ= =YII4 -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmcz0y8ACgkQYKtH/8kJ UieF1RAApP36pLeq40tZgPjrvbe5DGJCi1+YE1ovJHQBWSCYcbYmaxnKz03SHZxl rtNhAAATxSTxQ+5atxvgx8URDlBjVnPWu06w8gjGgXEPeRLZnV8RvBPvAvOYQ+p9 nusHOH8kJycWaYpOWP3fHGqm27zYjwahgguAkN1qtJc8UF2Ti0rR5j1EBSlXDLs/ aPo8SENgPxM5/Nh/ubA+Zk4IIUUM14lMCeGuYPJTA7Phjb8okxwS5EwvWv78hnUD RxjHJ7rG27PxqQjLviBCIRvdJBCVuBuNjDKdyKgq3VDQjhMj2JJYDdrqy8EhxmRz I7GljgiiUvRxviRj3kTtOUW1c+6njVJxBDM3JmYeKbBTHPJpli2+l+q5jeiH8pVB QnRmvI8jm8XdTfTMply8uLXqK2HKhfLNdzw8HHypLJX29pfTzw3cyYy8N4phYjvs xAmvXf09j9ciDEWPJ8iW/asUZA2Rl+qwbGr9wZ+eADm5aeUy4iMdwtI34XFUI1ik cRMZi+6hPHhPpNUjX/Tep/GL9bmlgd3K7GLjVewRMejSrokp6GhU7Fc8XLgJaq0A FbRFA4BNbLxgddN3DGvlEm79FQu5L9/M6FcsrnM8Majt3fdTZyyO5Sdyjpa5LQAM C0JS0RBgFs4PbJYXNtNtyWPRmVKKujVNr1ZreTOUag6iB4BiGNA= =vGJw -----END PGP SIGNATURE----- Merge tag 'zynq-soc-for-6.13' of https://github.com/Xilinx/linux-xlnx into soc/arm ARM: Zynq SoC changes for 6.13 - cleanup zynq_slcr_init() * tag 'zynq-soc-for-6.13' of https://github.com/Xilinx/linux-xlnx: ARM: zynq: Remove unused zynq_slcr_init() declaration Link: https://lore.kernel.org/r/CAHTX3dKLb4nOVpVvnwyxE6zJZNXpiB4hh=WzpKWwhqP7aLobjw@mail.gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Arnd Bergmann
|
1c8f196da9 |
This pull request contains Broadcom ARM-based SoC changes for 6.13,
please pull the following: - Linus adds support for the debug UART on BCM6846 (BCMBCA) platform - Florian dros the custom init_irq() callback which does the same thing as the standard irqchip_init() -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEm+Rq3+YGJdiR9yuFh9CWnEQHBwQFAmcfCrEACgkQh9CWnEQH BwRxBxAArVZ/cjrpMTvmNi9qgoZaT6Qtp5+fMdATSbIA6+O1lW+04anmGliH4ntm gTsrchds8c3+Uf78rMWcI4rwztInRb7k2tjtWsH1S6Z+xWwaC050AVNvlQP66QJJ N/S5WMTtROVE3ZXLENGQLdeTUvjoZjfvydUCReOsH1CX8aqnKNGzUjEW6O7mPtAc 1wWpQnZ/9BVEikcnKhcWouS5MkXejwbOO7YIbpQfUQCHOUjuSj5QAfZSZfNZpVOJ OHtTS0Ukw3Ejcd8zNYI8+zBzNMyhuwnbKmMaE7CMK8PyfU1gx9Gp/0dQUunTx1eJ Fj6QyzZ5Tw4U/Li4O9g90X+rdcCsuAjhDW1uf7SyaBTuSChCDrtrYcjXiNxnWOLs vJiZOzj5VhHJNEKgVeJSGi17ZmXIqxOCKeMEVoG3N6430/tz5OsN8GlQlyZXsEe3 PWG9LsHrG78zSQs3bP8nzkW0yVmErvhoyaNXfL3EY/+4QnYgSn7tQG4L+ztIG93W fC+TBz/zN3+cs9TpXBcnRK/Bv7+CSQGWvsqikPL7+zM0eshtyFwKzAUAM4ox0kaN Es9f8Y6sjbRKu4J7n9cUHXzudh3El3P9fE47+oTLJwL8AL2H865A/EALYs6qaEW0 uTx7S4IskKn8hvV5UmBX10JXG6Vet3b5EfWPGULf9QuKcH+IcKc= =IKb0 -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmcz0sQACgkQYKtH/8kJ Uife1g/9Gv6grB9m9KP3bu631sptFXPAAUHXRAxRzIbX46pSVBVNGxtcvTp07Og0 1Ise+WgJNReMW9JZplZGg7YubpfEbA0hLskOHBR7oJWQ4R2NvvKdx1bJB+oIo87h UnlW+AeX4RlXVyfu4GkNXPHlWNnSU166njGJ7oqk6d9ExZMJZw31bBqVL6bZrKSe VJyNr9iqKJ7upfFl0ldY9N6pL5ubZxWz54ni55HPtSe4BaCtfGoo4zM2SxDZiVPE jbIhU/2GfOUysWdoxoZIQDqL8gyqC/tb2W1DDtQUgYmIK2WPiaqEtrBeot2tYE+6 UbldlaUsVmwAGtj367dyz8g45cIlcMLKQuasFSS2LYl4+YgUxqujXxvxvxWNTvYc 8PE72ZgzrOuTvOJPI5sFO0XTrsN3MbeJSKmsWQda3imZ3B2Zyc2mxV9tZCBsDw3O 3S+2dui3T4oppGLqUtqt6oocVVtf86lTSQHaVGlakFQ/Wo3uLRprvcluXjbQL4Qm VS8qJ84cYgw7kxzWUwzBcUK2NdUDo+lExpAqSUUkSJOBIt0ey/7TWB2bE8u1NJ5y PByGOuPQYzFBHvKHQcVOHADNyMEEkNRTwlYeblmA0WkwmtfxX6dY8yeR+v1d4PjC T1ctBNOPUSewVKypbVZT1lQ4TtIN7t+MDKYXeHJD06/yU/6XYg0= =pE/r -----END PGP SIGNATURE----- Merge tag 'arm-soc/for-6.13/soc' of https://github.com/Broadcom/stblinux into soc/arm This pull request contains Broadcom ARM-based SoC changes for 6.13, please pull the following: - Linus adds support for the debug UART on BCM6846 (BCMBCA) platform - Florian dros the custom init_irq() callback which does the same thing as the standard irqchip_init() * tag 'arm-soc/for-6.13/soc' of https://github.com/Broadcom/stblinux: ARM: bcm: brcmstb: Drop custom init_irq callback ARM: bcm: Support BCMBCA debug UART Link: https://lore.kernel.org/r/20241028035449.734504-2-florian.fainelli@broadcom.com Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Arnd Bergmann
|
31e7323a41 |
i.MX defconfig changes for 6.13:
- Enable BD71828 regulator and NXPUART Bluetooth driver support in imx_v6_v7_defconfig (needed by Kobo Clara 2E device) -----BEGIN PGP SIGNATURE----- iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAmcojA0UHHNoYXduZ3Vv QGtlcm5lbC5vcmcACgkQUFdYWoewfM5PTAgAuIjJWSs48S1ITX67Y3T8ZeaKTpcc gkfy2D/2VF39gWSfWGyFFQBUToBInu5WZQmUX/z8tKeEKuKneEh1YxSDyWdH0Dop +VmSXcNotemQAvTirc9n6XixxH6seouIeZYvHYW/KwMcfrhZc3F2ALsKI+40NkAp 5v6JVRmRjmS0+FrMR2MqPDvrfoRzO6ENbKs1Y+wjOEvCld6AaLHGInSGW0+UmB8b UzFdg7m+NBHGGZ3eTWIhkXh8vOkJ1o3WERV6it8GPVevsJg9X9eKo7m9HICPwVeV I6EFpmAq7kLS4U8+BpuqcnGOzm8CBl5JVEg76Qe1RqlzZlz3JGlUbSEZ2Q== =moI9 -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmcz0f0ACgkQYKtH/8kJ Uifd5Q/6A6h66NLDqDOpsTnQHGxMXYdWPyPnd+R9/tpiCyB8rijuBlPNJYeTATyB 5RYeQilAjtWRJBB9Bg67lFAQZC/orID4nAnO05gHlxi+dGjiUtdxSIXnplt+8vYE 9vDjNFBakL6jhWL65Bj5thL0Ijvm75Mk3/ttAqrtsrB7FLyV0XqV4NWEr510PvgM Zb35YnzUS83ukZ1d1vXOexrzaq+GaMdKvJlu7olAvZEiPeTxZWF3lgl0HY21ZoOx /viyvDQVA1aG0pInvXxxLv9mzPNMoMreEgHpPlXVunAsQAkRYgWS737PQHer9JEi J6OG9D/bNUj/GqVsbTpk74QWMranMhbD7ICA1X+DoWYm5WNm6PSydIFjSfTNOCP8 lLZueyce1+bMmeu406L4YpGMMJXZcPdTYuNwipkj72InBasgoFcly+kUgetWNFCt s9M0XyrKvXd9Fq1TxMuADNzslWJulRXL6BrOopmTEgdUS8zoiXUgPUHqeP+2dUmk bLvSEp+zHG3VrQOATLa6Ge6x+HHyLuj6IzFAgcPzXpBhLkcHdwkWWlYU8ESHG9NX H+EngiKrNFlSZUChIMynPbjrcIXS8QQ1mU+V1XAUE8DQIGT7l3YcRlHatB2ozuw0 6FsEzcQ1PXHe+L5S4i7Nta+z0zoz75JZyg5D4De+4yu8wFq5qEY= =iawl -----END PGP SIGNATURE----- Merge tag 'imx-defconfig-6.13' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/defconfig i.MX defconfig changes for 6.13: - Enable BD71828 regulator and NXPUART Bluetooth driver support in imx_v6_v7_defconfig (needed by Kobo Clara 2E device) * tag 'imx-defconfig-6.13' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: ARM: imx_v6_v7_defconfig: Enable drivers for Kobo Clara 2E Link: https://lore.kernel.org/r/20241104090055.1881860-6-shawnguo2@yeah.net Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Arnd Bergmann
|
7d33d08f3c |
This pull request contains a multi_v7_defconfig update:
- Florian aligns the ARM64 and ARM multi_v7_defconfig by enabling the kernel with debugging symbols by default and using the toolchain's dwarf version -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEm+Rq3+YGJdiR9yuFh9CWnEQHBwQFAmcfCvQACgkQh9CWnEQH BwR9wBAAvhEZTD0qYLCXwFk1rA3CV0y2RNiw9v+lD2MmBCjviqVKJ6WtyCVDttm8 15w83QfCEs8JnHv/iEYtsXKDM5GRb6Ukz9CJj1cSPZmwql6Te7mXTwzKcBqY9ZUV t85OK4RgIYTohyL5wdncMpyF0axP0qjT2KSc5/wFiyoefaywLSeifvHZHpIh0xEK 004eVuAVGKt7lMwvC6/rd0e8+ZpC81Utueonkl/qRcU7YQmn1JkfFL8wAWMAMwXQ FUDjwfIyPCXaf9ZN//FbEpFAjded5PmLL5zyWCEuYAMMtliwMlbr08CGw6z5UrD0 w8DNhSMC60K9bHKnVCCGvTpgS05GOFLuZ5iaQt+e+PUYUyx42qfG1RkJmB4/xU5i ktfkId14ZeizI1e6dXg6k+B7RltVMASpcjt7p4K6/XP/jk5N0wN7WDBk1lNK4/XO hlVLYbv4UJGOJlpsVIJBNg0pPzeI08p21uwZLDP916eoj9NbIjQq7IRrfTtO7qCe wsVaE5E0zIk8nYw1GQXH6e/VZTQ9gnoHAUC+Kv7lstmDx2VSh5lq5R/s90mfyTj1 VxevabH6pxkQYzMm4BvWmjRzuty0MCCLO1+Jzr8399nwtPXOrW1V8f/q/5lakh1w lX3e6wpEeoDxscRlGot9Tl4hrUAW/e1JEiApObMqvtiqVke/wjU= =Dt31 -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmcz0XkACgkQYKtH/8kJ UielaQ/8DY6aGGtoE6a2PgGHW8F/3KILuva1fNFc42sL+bbZQxdxKbz5Bh0lUcrR 1AwDYgFVBI+yFi0cSDKhva0f9d66WhYeQRGNP2Bdqyg9B8Jk8Pr0TOf3f9fCgGGr qISxCNr9vGI3auEjc+pfO4GesxOheQ8wyYDKuXsD9n7Ryxyvc8hpH2LMSZXr9t+Y t1xHRtykt4pkt5wpbiXrJLmdmyK6oW5P6Ltw1sXkHRJRxkxrQmOEooz/XYE+iOHt gQDaKwdtEL+zhgORa+diIn1p+l5x00VOq1e+qx7/LzJ4Oz/NMcLQUtIXbbp/LVZ5 6F0c2/FUbN/dJWOndzAwSjRAc6NrAFvKjNp9NnfT7JIO2t+MYOxbsp4hBPDPYNoZ jK8Fy6Gsq9nyteEPNswm0Y3e0tkdR5EXmo5mnAIl8M0uJFg1EbvrLVeSwEuOAslV sbjXa0uR2MpecDVrxFVJMtbQjw/rOngDz991+tjEmMR1q7sQXVOhJCQrz/Js0JgJ p33o0lA1SZ4tki1VA3h7UmGiOllGFU5Df+sxGrqT/+sBtJFLbshVNePFQQecyp0O yoGuDY8sIfu5JQ8Pa6QuB1FYo2kz3VPPhqPRzQ/uJu6MpIQJisybguJBaGQm5i9i MAslPLtwRDUzL/W+WvNTfrzZlvyD0VavAVDNw2n0za93FWPkjio= =1G37 -----END PGP SIGNATURE----- Merge tag 'arm-soc/for-6.13/defconfig' of https://github.com/Broadcom/stblinux into soc/defconfig This pull request contains a multi_v7_defconfig update: - Florian aligns the ARM64 and ARM multi_v7_defconfig by enabling the kernel with debugging symbols by default and using the toolchain's dwarf version * tag 'arm-soc/for-6.13/defconfig' of https://github.com/Broadcom/stblinux: ARM: multi_v7_defconfig: Enable debugging symbols by default Link: https://lore.kernel.org/r/20241028035449.734504-1-florian.fainelli@broadcom.com Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Arnd Bergmann
|
06fc642c53 |
Fixed-regulator nowadays has preferred node-naming scheme set in the
binding. This gets all boards on the same state for Rockchip arm32-dts. -----BEGIN PGP SIGNATURE----- iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAmcyH54QHGhlaWtvQHNu dGVjaC5kZQAKCRDzpnnJnNEdgQqLB/9wgQ7tMybGu8ruGGGVcuyDGq28yqp4F53l 2KlIZGKSv9zDmNq/uKQhGAnomQLv7zNPemr7iqDK2QeWmPPm5GclLuxnKe7GA7sL FyQrWWMNgI2ruH+ms8c8LcjzhWR010Vb6sWA/kXBEezW78Y+7EYaPAVdji7ylVH7 o3wgq6GWvc3AGXV7OSjBFeU680snsnwg8rW1DVjUdWVdPNmMyiN4sQlYxGdbTQN/ Vu8rdtROv2qiVhO7KvHfyrwTms56qTon8b3amzmKlFnBGlWOv4svrbwklzL9s+ua aPJe0GWvkGlt9vCnRnh7fi9zLdOWNv7G/DQwJT+r2rXlYCng3CtB =onFR -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmcz0AQACgkQYKtH/8kJ UidCuA//UXJ8LTdhUvr5uBde5DlXftiDYy9VlO6k1bMb+W7T0mGjeA6ysKENC588 8j5fUtmtCRO2nzD/pMp/A02mvi3ZH1ErLEzUZo7HKLjFgIVG0ZoVW31dRbDgkAbx d9wCGC7BHNo681I2xsBucoZwM55mMyeSI/EALVg89V7QYyj9tSjyr7Wj834jMOPp 7cTL/ZVtSkyNIG3+JlFndEQPF2tsYRNclWUUjf2wuWkQm/C9lVr84oi1H8QWtZop tEixFi/kppfV6HXxt2Odk2pWKs7wJivPBVXX1L4ch8rqXUnxigCBPsKm7hmOp7qd oTIm6bUofYzRZEVexnTwYm+Cbazg5b+TsPoB48/SVXeOsV9MuNHSzzmd3nktJj40 pbDOXTu8IBB1TpGHMVcU6e4UyDySDlIZnHxLyZLh5Flmym51Ft+pcni7R2+QG++B VZqkPJ3/UqHPeIYOVk0B/2jG6n/fzMwXQGMO9xusgDEYM7+bs7QjutpTSlVE4p6c 0EUxdsT0JmERyuNo4NfNwR4cBtPIpXASBdT7rxdQOGD5XRg2rEex0j66lk6Gty5+ TPQM+F9PEaqYCYjkuWWQXTKEJ/2gA67OiKuFu4ny5bUHuYJHxtTHSnaQnmRdobW+ c2I3o3oCdG2cYwSIUKgslGX115lhfwflG8xBHlyJKP7uyMyqcBw= =3uQG -----END PGP SIGNATURE----- Merge tag 'v6.13-rockchip-dts32-2' of https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/dt Fixed-regulator nowadays has preferred node-naming scheme set in the binding. This gets all boards on the same state for Rockchip arm32-dts. * tag 'v6.13-rockchip-dts32-2' of https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: ARM: dts: rockchip: adapt regulator nodenames to preferred form ARM: dts: rockchip: Add Relfor Saib board dt-bindings: arm: rockchip: Add Relfor Saib board dt-bindings: vendor-prefixes: Add Relfor labs ARM: dts: rockchip: Add watchdog node for RV1126 dt-bindings: watchdog: rockchip: Add rockchip,rv1126-wdt string Link: https://lore.kernel.org/r/6740039.4vTCxPXJkl@diego Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Arnd Bergmann
|
36255ab493 |
Allwinner Device Tree changes for 6.13 part 2
- Remove accidental suniv duplicates in Makefile - Add second source magnetometer for Pine Phone - Add orientation (mount matrix) for Pine Phone's accelerometer and magnetometer - Enable eMMC and MMC on A100 Perf1 -----BEGIN PGP SIGNATURE----- iQJCBAABCgAsFiEE2nN1m/hhnkhOWjtHOJpUIZwPJDAFAmcwtssOHHdlbnNAY3Np ZS5vcmcACgkQOJpUIZwPJDC+zA/9F1YbB88RHtaLKwN/WLQZ3vkQxADhulsixI8X BHQATpsI477csCxjFJre5VPCDT8w77Dy4v0NHzIfZ/vB74wcTsBXoaW7jsSS9SQs V7Z9kf33loRaeY9OUgaJNZLBP0vPCt4GZBlW6VdMsJtID5ZMO0Gl42bFrL+QI8Oo 4ZnINz+gcTZtJFU6h+ZTiCzqGe13NJTD/Q8g/yEjMc38tyvVf3t/IhUyZBHCDHs+ G4Fs0aIpLYbicecRfk4sNTla2vsAezzkyaCu+Kq/W5dWy2vxKKIyarYMNmTmUJfH zed8oRKqqYedAI/1THMhNMTVm1Zr5FluhYBAkbGGVQNeLldBv+5P6Lte4pAUGIFJ Gmg0hWDW2KkIpmAmyVMAKgLtSQXLrwPS5Cls6doDk+6dJBh9unPKgl7CUFGnkJo6 giZSvUi10CKCCf2SEG7KQyHb/dOCwquQf2TMVQvglMbxK4cfdvdryaN4/9z318aE eMQbN9MNpFsLUGtfDMjQJ2cOQBhAGsQROJOwLpjf3cBXl62RXx2iQK2e/DIm6sU0 ElFAAxN7ciq7YlMFZDteEsrAKv9uTsqU7oqxVJFJbwRMhC/hPpknMIsPAzmQSfPx WgM1xVUeECDF9suhWAHBWVXi4gY3fTUxUk0UgkRrpPwfAmcECyGqVLU0JOKwowGP 4/xFtBs= =vpQK -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmczz24ACgkQYKtH/8kJ Uie1ng/+MJ9Uwv80VTf/qSmm2706bDiDg8A7r1lMeSTD/o57rcg6sfUjHUfLfbRb 9LWIxOPFgqh+9J3NsivlMC2s3aIGqCJIXzC/0AXgfmwnE5/fKac7gZgctbZRRbJD 3Uz403tcmRgTHrNpOEg74Yak0HC61gQeR7AtqeuvDz2KbMCvUR3qbpOZ2EqChxxv JDGBXVgrke3x6Cexawsf+DX/lBt5A+MMuPPNRdUS9ZIem5T/l0QjboLJU0lHt8MW BSfCeZx4SrigHwhHqJxYjVs9KhNIS/se7/QQ0Huw3rBKq/rN+506KduwZ1+r2P5n x5TrUt12kzsYPIyruXNBOQLo7fwgQ5dxxiphCMoagVA7CwT1ggnGmuoEEQeWW1KB e8gCb2WajgQmNzk9Gd3fG/cr8OjxMI9c5YEu/dy8Gy0UFzh2XD5q8Z2mEDPx01JI L8hpaMsRHntoKHK5nWeEsG9q+PcNMgGco7UOC0wpdlxbZwAJP8Q5eRzt9GglMIoX 6TbAoiEA7rXI04ijkCAJ7pL6cCEbSIt1QY5eIKIohZYhj27sKvVkT/Kt9VIghoy6 +GqzstDCf6Stf7erlV7Vfp2bwYefxiQtxA099XDaB16hHO3UfCwxnv+wG4cVCFL2 EmVTsALzS5c+WGoUAcXitCoWhD5VAPGVbCrGRFvu5rraW/wNFpw= =4WAW -----END PGP SIGNATURE----- Merge tag 'sunxi-dt-for-6.13-2' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into soc/dt Allwinner Device Tree changes for 6.13 part 2 - Remove accidental suniv duplicates in Makefile - Add second source magnetometer for Pine Phone - Add orientation (mount matrix) for Pine Phone's accelerometer and magnetometer - Enable eMMC and MMC on A100 Perf1 * tag 'sunxi-dt-for-6.13-2' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: arm64: dts: allwinner: a100: perf1: Add eMMC and MMC node arm64: dts: allwinner: pinephone: Add mount matrix to accelerometer arm64: dts: sun50i-a64-pinephone: Add mount-matrix for PinePhone magnetometers arm64: dts: sun50i-a64-pinephone: Add AF8133J to PinePhone ARM: dts: allwinner: Remove accidental suniv duplicates arm64: allwinner: a100: Add MMC related nodes arm64: dts: allwinner: a100: add usb related nodes dt-bindings: usb: sunxi-musb: Add A100 compatible string dt-bindings: usb: Add A100 compatible string dt-bindings: phy: sun50i-a64: add a100 compatible arm64: dts: allwinner: a100: add watchdog node arm64: dts: allwinner: A100: Add PMU mode ARM: dts: sunxi: add support for RerVision A33-Vstar board dt-bindings: arm: sunxi: document RerVision A33-Vstar board arm64: dts: allwinner: Add disable-wp for boards with micro SD card arm64: dts: allwinner: h313/h616/h618/h700: Enable audio codec for all supported boards arm64: dts: allwinner: h616: Add audio codec node Link: https://lore.kernel.org/r/ZzC-OF57MT_yCeWH@wens.tw Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Arnd Bergmann
|
4bdb783791 |
mvebu dt for 6.13 (part 1)
turris-omnia: prepare device tree for LED brightness change detection kirkwood: fix at24 EEPROM node name -----BEGIN PGP SIGNATURE----- iF0EABECAB0WIQQYqXDMF3cvSLY+g9cLBhiOFHI71QUCZy3Z9AAKCRALBhiOFHI7 1XsoAJ4pNATVd6wMB99OU5acH2NoJNTAwQCfd9MxQ5Jry32vZb+hlGhbcSYt0+g= =lmuu -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmczzv0ACgkQYKtH/8kJ Uid/EA//ZnhQOYIAeZjcPQvzfI7Eyxrn3UNUqBrL54UNEgq0IxyYAZd58ayRzA1y GxrknNGxw9dhVY7xZhl6iZyng7Xszh02zNEfgQNg77YIsUzD2SdHun3yJf65+dTt EEGrq2eYnc1SYICDtKiWP7w38zocALemXNUi7wc9SzjXQwuhmhszKIVET5H+5nSE tR2KXMOK5eyPcMsyl7slxNIN0+meqJhD/b335CcqyAmkjPDPLYx2haSrC2BlgPZE QtF5CrYUDF5Bbf9DbHGxrTKEQh/KNuHp9sfiQXAztKGJ1fPCGNny16+jiVRDd8z+ WW878haXKC5QxhGhE6IWwOfMCR31bGr35RkrxcIiLxqrPBpWlgHCGnp7Kgxql1g8 Zh4rTR0a7g8BOS6Gwc1x8kmLQG2AaFKmZMCBlKA7D0zvqPej5kBpfHHV/R24kWHm qaJeTSRMDWAlDuyusId5U0ZIN0t1Wkhkfg2wD1qAfBih+OBbln3eAHGVUQy/A8/X M1itMn/eF9fvKvCXlfzBp7ngraukJsj92KPeyjHwJJ2Qr//Vj5A1ZKI50siBvDWm 9xxvU6n6tOTH0IrqMcX1tJ0vAIGLGhqYdznG2X8E1CHP4JUl/M2bxCxVyDgn0dL5 +RwhKSb21wHWYbfE9PhOi3Oegn/wp5PKegdPhC/3Iar7YWcAetU= =XOvv -----END PGP SIGNATURE----- Merge tag 'mvebu-dt-6.13-1' of https://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu into soc/dt mvebu dt for 6.13 (part 1) turris-omnia: prepare device tree for LED brightness change detection kirkwood: fix at24 EEPROM node name * tag 'mvebu-dt-6.13-1' of https://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu: ARM: dts: turris-omnia: Add global LED brightness change interrupt ARM: dts: marvell: kirkwood: Fix at24 EEPROM node name Link: https://lore.kernel.org/r/87bjyq83x0.fsf@BLaptop.bootlin.com Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Arnd Bergmann
|
2f992e7346 |
STM32 DT for v6.13, round 1
Highlights:
----------
- MPU:
- STM32MP13:
- ST DK board:
- Add support of WLAN/BT Murata Type 1DX module.
- DH SOM:
- Add M24256E EEPROM suport.
- STMP32MP15:
- Use IWDG2 as wakeup source.
- Add support of WLAN/BT Murata Type 1DX module on DK2 board.
- STM32MP25:
- Enable RTC.
- Add DMA support for U(S)ART, I2C and SPI instances.
-----BEGIN PGP SIGNATURE-----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=yEXz
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmczzmsACgkQYKtH/8kJ
Uich1w/+JeabBt3wucXFbgc/W5m5bWC/HWoF+Be5rxYkBAFAVai2mrvncKh9TP8b
8qmSY6U6hRDNE/E7vJDqrW7gsFQUmCwmk9Why8FEv4HI3x45aWLL3vLVkqRXN+sg
PG+D4vbM6LRHLMTETsKa4PhVloEn9nWXM9g0CU+SKo5jlhMdLPEkwaBUTIM0Jvck
aN972QLIpeN42EcCniKLK8cWUzYQfI9ei2Hxpmfo1JO0hM0DbmlLVFz/JRF61abg
HTS//waeAkRJzobxYmc0VLDQnyycEBu9KOhjBOpYK0ZmGfaMJmPzJKMN4pxrW/7A
oo44Gt9ifDIjsTP5KGfmJpVYcWSBEhhaUOfE7x81OxWq14KkmP3JMf9bUybV/HV2
DFG366cnz8vrvJ6JxaeG07e7BW7MlZVclv4v9an47812rb/5k4e/UY/ynGl0DPBZ
PCUvsNYFRG8w13aPcbAYBF+sTZn2AUuiMhyP4JOrxMMB2rGHQStqfQtWy/hrz+SX
Qo/7je/OGuWqYreLQ7EXECz//3tSYZSrif16Ie8t+1OfR/+fvyceYwHmaDLiiqsD
Rsf3is9zhW+Vnjn04+8yYEEtDv7KZ+drHjYaD847O0q66p2QsTSwbjlOQ3mtG0xm
SaTevBiddHHaY8ZQjS0CrUOg5f3YV6VmSOyEK/i5B3Dq7pJziGo=
=+sT+
-----END PGP SIGNATURE-----
Merge tag 'stm32-dt-for-v6.13-1' of https://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into soc/dt
STM32 DT for v6.13, round 1
Highlights:
----------
- MPU:
- STM32MP13:
- ST DK board:
- Add support of WLAN/BT Murata Type 1DX module.
- DH SOM:
- Add M24256E EEPROM suport.
- STMP32MP15:
- Use IWDG2 as wakeup source.
- Add support of WLAN/BT Murata Type 1DX module on DK2 board.
- STM32MP25:
- Enable RTC.
- Add DMA support for U(S)ART, I2C and SPI instances.
* tag 'stm32-dt-for-v6.13-1' of https://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32:
arm64: dts: st: add DMA support on SPI instances of stm32mp25
arm64: dts: st: add DMA support on I2C instances of stm32mp25
arm64: dts: st: add DMA support on U(S)ART instances of stm32mp25
arm64: dts: st: add RNG node on stm32mp251
arm64: dts: st: enable RTC on stm32mp257f-ev1 board
arm64: dts: st: add RTC on stm32mp25x
ARM: dts: stm32: add support of WLAN/BT on stm32mp135f-dk
ARM: dts: stm32: add support of WLAN/BT on stm32mp157c-dk2
ARM: dts: stm32: rtc, add LSCO to WLAN/BT module on stm32mp135f-dk
ARM: dts: stm32: rtc, add LSCO to WLAN/BT module on stm32mp157c-dk2
ARM: dts: stm32: rtc, add pin to provide LSCO on stm32mp13
ARM: dts: stm32: rtc, add pin to provide LSCO on stm32mp15
ARM: dts: stm32: Describe M24256E write-lockable page in DH STM32MP13xx DHCOR SoM DT
ARM: dts: stm32: Add IWDG2 EXTI interrupt mapping and mark as wakeup source
Link: https://lore.kernel.org/r/92d2d6df-cc5c-488f-8ebd-550b1903db12@foss.st.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
||
|
Arnd Bergmann
|
bf7626089a |
Amlogic ARM DT changes for v6.13:
- DT fixes to pass bindings chedk, including: - fixing nodes names - dropping meson6 ATV1200 board - add missing properties -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEPVPGJshWBf4d9CyLd9zb2sjISdEFAmcrcQ0ACgkQd9zb2sjI SdG/0w//eruAQigovZ3UkZmcoxRIWW7kTKk5pQpxFypFIVSrqxGv1VLCzvMBuTyH OPYLsD7Di7KJ36og6/JcNw9sRQeqFbrv53NfS8GsBKP+n2w/9Woo+ulKEW0EDAzS ZS5EexUeW7mNgA019oBwwnN/dTFUhbp6yexU+ta5XvhSihHxu9OZcxGRLCZNkeAz LshuzJKNyMxlINneJe8EEQYWl/HapXRrUFk7LTePgNoy4FOyMZloBBi9Zpg3RsjE b6uw6lC3DLKNlkcSo4HLmHpzFOhfLkvpdCtZkIN9Z3QeEJt21gphqlh0rg3Bvr5L jb70+1vCWAuvtlfXb4s9ZJKZ/Cyhi8FoluIi7zcOvYLgZt/Y/yGJ+J4UhprrNQfW H9FRpK9lbW+mhXp7myD4ZIk0BB6gicVkQ8eiRTp7KR9YvSuRXZLm8HrD352zvBfG k15YaYtbdmfifnQM8J9ALrHyFAYkrf8pMtt/LsO2RXaQxzbySvdwrGoGXfveq7i/ eDSlf7GNnfyoCDGAgeBRf0TV07Jq2adC0r8fctdsHB+jjUr950VDLQevML3J5ptH tPKGSshpm6qMGYH80xTvCX6y+b4PMK0HCRTbgZ9pxyH7H4TtNzYigw9q9BEWCwpd 9O4PyDD0OZLoHSFB0BYt5+wskVzo3BN0lguFflhT3nXri68YZd0= =w/xu -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmczzcIACgkQYKtH/8kJ UicOexAAn2IZA19vspYc9KmpffSQtJje8lAffHVpN8Y7enRnMkBkfvhfWM5Mq0OM ncQsX31tlCwfFELwT09F6poa8ZKecaVZLG9McIBIaI5AA6QHbnaYnOlSdte+dpdn AO+KZteCVJYn2P/Vze8Doc+ga6Ocll6mO58tEgeYv+/EBz+raz6YwGezmizTAud2 FjBbPsBdYQA5wqH1lU3++9NuzhaXPAcSWx0nZx48OqOAmvYGJGjWmORDBDfQUKAX f2Kr3VEBXsdchRX2jUPwzCWAe/QJFrPfYwnORDvPvi32DvhyZRFKA3H+GE/o/Nyz wUAM8w+kY63ihhRboX+e7Rq6hwxkHS/5A2kD/BgOM3za57bsYn88OHVK931EBIW4 j7pl8Ftvk5rJI4EyV3yhXsV9ofW7I6WMHyibCgNw3oU+Etnypu1mPIA/85wLM4GG RsxDLhu99t7tKUhskTbGBRFtms5EyvdrADZB9wPXOlVSzIldo8+6Td9Ox4OgCYxP VY6UkmzSkJKVLeuDzyDbmJPwlqcUpsqIQyW9cc9dMudzMxndrKiq7tF1ija+Yy6d TZIEEdOvta+RKr5yTkwuorFan14+q1HRrGoZca5rm6WEedPLHV9Z2Vs32kt1/2b9 aglYJCXpNgJ3j5PD9qmUkul1kgmoFSGSk6pweyv3mo+s2+SdmaE= =PZR6 -----END PGP SIGNATURE----- Merge tag 'amlogic-arm-dt-for-v6.13' of https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux into soc/dt Amlogic ARM DT changes for v6.13: - DT fixes to pass bindings chedk, including: - fixing nodes names - dropping meson6 ATV1200 board - add missing properties * tag 'amlogic-arm-dt-for-v6.13' of https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux: ARM: dts: amlogic: meson8/8b: remove invalid pinctrl reg ARM: dts: amlogic: meson8b-ec100: add missing gpio-line-names entry ARM: dts: amlogic: meson8b-ec100: add missing clocks property in sound card ARM: dts: amlogic: meson8-minix-neo-x8: fix invalid pnictrl-names ARM: dts: amlogic: add missing phy-mode in ethmac node ARM: dts: amlogic: meson8: use correct pinctrl bank node name ARM: dts: amlogic: fix /memory node name ARM: dts: amlogic: meson8b-odroidc1: fix invalid reset-gpio ARM: dts: amlogic: meson6: remove support for ATV1200 board ARM: dts: amlogic: meson8: fix ao_arc_sram node name ARM: dts: amlogic: meson8: fix soc thermal-zone node name ARM: dts: amlogic: meson6: fix clk81 node name Link: https://lore.kernel.org/r/ffaa3755-8c5d-4fc3-86bf-9129d3889bff@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Arnd Bergmann
|
f50f6052c3 |
Qualcomm Arm64 DeviceTree changes for v6.13
Introduce descriptions of the 8cx Gen3-based Microsoft Surface Pro 9 5G, X Elite based Dell XPS 13 9345, the QCS9100 platform and the "Ride" development boards thereon, and the SM7325 platform and the Nothing Phone 1. MSM8998 gains support for HDMI. The Lenovo Miix 630 gains support for volume keys, audio and sensor DSPs, touchscreen, and its specific WiFi calibration variant. On QCM6490, Fairphone FP5 gains a thermistor adjacent to UFS/RAM, while the IDP gains UFS and WiFi support. For QCS6490 changes to Rb3Gen2 enables WiFi, Venus, PCIe, SD-card, and volume keys. Adreno speedbins are adjusted and PMU nodes' compatibles for the two clusters are corrected. The DB845C/RB3 and QRB5165 RB5 vision mezzanines are converted to DeviceTree overlays, and both gains CMA heap for libcamera to use. SA8775P gains GPI DMA support, support for controlling download mode (bootloader-assisted ramdump support), additional UARTs, and qcrypto support. The "Ride" development board gains WiFi and Bluetooth support. On SC8280XP (8cx Gen3) another UART is described, used in the Microsoft Surface 9 5G. The WiFi/BT combo chip's power management unit is described on the CRD and Lenovo ThinkPad X13s. On SDM630/660 the GPU SMMU and clock controller is added, as is the A2Noc and LPASS SMMU, and the DSP-based WiFi device. GPU, modem DSP and WiFi is then enabled on the Inforce 6560 development board. On SM8450 Hardware Development Kit, the WCN6855 is modelled to enable WiFi and Bluetooth. A "global" interrupt is defined on SM8450 PCIe RC controller, to enable hotplug. On X Elite, USB Type-C controllers are marked as usb-role-switch capable, the GICv3 ITS is enabled for PCIe. TCSR region is described and wired up to allow setting and cleaning the download mode (bootloader-assisted ramdump) flag, and residency numbers for C4/C5 are updated. USB role switch is enabled on Lenovo ThinkPad T14s and the ASUS Vivobook S15. The T14s also gains support for a second source trackpad. The Microsoft Surface Laptop gains LID switch and the USB Type-A connector attached to the multiport controller is enabled. The CRD has its HID device power supplies described. Application SMMU is flagged as DMA coherent across QDU1000, SC7180, SC8180X, SC8280XP, SDM670, SDM845, SM8150, SM8350, SM8450, and X1E80100. In addition to this, the effort to improve style and binding compliance continued. -----BEGIN PGP SIGNATURE----- iQJJBAABCAAzFiEEBd4DzF816k8JZtUlCx85Pw2ZrcUFAmcqTFoVHGFuZGVyc3Nv bkBrZXJuZWwub3JnAAoJEAsfOT8Nma3FTLEQALnrquJONM9qtUC8E2dw5VGuA5UJ hJLahtYsspCCgpCGxzlvX9kF79gDko9CSU2A/xLjXT0OB+OzAsUniQhNWufnpEP9 JPQ+MOWQp+7UtxL+WNnTmiYaU2nR0gurZhji3gmnMP4sJqiZmH7hGADSYVb5K5G3 FRAgf1zNwrezW50ZPLsLQqnQRdGfjGyiy0HfVu2NXMk4mkFmaAsw12rFdqIixBq1 V9STUywmaXbMCfhOZlN79cjjswyBWz+y196gIgjpitHhoY1s7MGwjYiBYXnor+FH w5AcoyRs5jxqbnVb12DtzrP0peml4OMdKwdHFq1EY0cVBaNK0+CtG8eew7PssbUH Hz4hztK8BBCNMMQbpSW4aqXeDe3EcCNnFVtuX4B100oCTLWpBiKP203NXVttjxt/ YFch9OoIcQv+ouYzZgJs345bj48UoEX+PusAEo2NeWK19hesA3eNZlslovNSrbn6 SZoxqQ60nKO+bpncsDBmy68vl/cWawqdrjBENDUL9PeJdzfDoaPGkRJmrbkKb971 xWFzjUTFnJQJVdywOLhSCAkxGVHL2T0DaIsqVJYkNKgCtOhghJ2IWUk4Mk4ueLD3 fGGXbY2VGFSI7J/Aq+80rQcmDR2glVvEbebfmqzWYjyQPJnbg8xey4WxgSjpiCur TEaBGSyFrcO1sPJs =Qu8Z -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmczzIIACgkQYKtH/8kJ UidW2A//U7s3EZaJdA4cL6wT3SCb1IGdU4DzsALPJuVlRiQuCiT4C+r/9+k7p6vf 4sny9ZvvadjtM9Goext4T40rVjw00kcgpI3tE3UzEgDr6yws/7AnpI8/Oo7A2Kd3 1vn2OBeRMS+HqQKhyjZ2rAtMnSUw7aQ69tVCbc5YeWPN3Tj4dI0/Agg12RZSuz3B 75aVDiURhzcPTDsnywYXaEzDH0Jkk4+wcmIMk5ll28s+lOlL2YjEGeLeoBFriJss 4tv4ir5blhlMMWFPRif9cxp1msrd+7nLYBKtBW/65+If5Od3aCg0I6H7beMAFRCr H2mO0RadU/E7Q00i8pT48/5/vaDFpyEuvdxRdq4LVkfoqOVnIvj+hV7BMrQpudyy /0R1+13FNjKrBI/4UcgaZH06N/i0A296Sxj53jEDgoB/hqr4XpzzrrxvApu44BEU dJLGr2LEOe7+rfhXcu8kRwtuza6F0gYL5SfL1zNGfcdSeUNyKd/9j1FqTvmJsBSW 5zZfgHuiuGb86FSOvIXhEIxKyC19aO8El8tiqGOX2e8HsG23pLJTS6yUQqGxlvt6 2WSwIzgn7XBOAaCePcVDkpau5rpcqNt2X5Ka9+M2ebXdInjRPHXA9G0LBUbrHYvU LcCtK0m7wyDkQYIwuDEBg/xsrg4hpRsvCV5DRR6oD9jtixGnWRU= =JBWR -----END PGP SIGNATURE----- Merge tag 'qcom-arm64-for-6.13' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt Qualcomm Arm64 DeviceTree changes for v6.13 Introduce descriptions of the 8cx Gen3-based Microsoft Surface Pro 9 5G, X Elite based Dell XPS 13 9345, the QCS9100 platform and the "Ride" development boards thereon, and the SM7325 platform and the Nothing Phone 1. MSM8998 gains support for HDMI. The Lenovo Miix 630 gains support for volume keys, audio and sensor DSPs, touchscreen, and its specific WiFi calibration variant. On QCM6490, Fairphone FP5 gains a thermistor adjacent to UFS/RAM, while the IDP gains UFS and WiFi support. For QCS6490 changes to Rb3Gen2 enables WiFi, Venus, PCIe, SD-card, and volume keys. Adreno speedbins are adjusted and PMU nodes' compatibles for the two clusters are corrected. The DB845C/RB3 and QRB5165 RB5 vision mezzanines are converted to DeviceTree overlays, and both gains CMA heap for libcamera to use. SA8775P gains GPI DMA support, support for controlling download mode (bootloader-assisted ramdump support), additional UARTs, and qcrypto support. The "Ride" development board gains WiFi and Bluetooth support. On SC8280XP (8cx Gen3) another UART is described, used in the Microsoft Surface 9 5G. The WiFi/BT combo chip's power management unit is described on the CRD and Lenovo ThinkPad X13s. On SDM630/660 the GPU SMMU and clock controller is added, as is the A2Noc and LPASS SMMU, and the DSP-based WiFi device. GPU, modem DSP and WiFi is then enabled on the Inforce 6560 development board. On SM8450 Hardware Development Kit, the WCN6855 is modelled to enable WiFi and Bluetooth. A "global" interrupt is defined on SM8450 PCIe RC controller, to enable hotplug. On X Elite, USB Type-C controllers are marked as usb-role-switch capable, the GICv3 ITS is enabled for PCIe. TCSR region is described and wired up to allow setting and cleaning the download mode (bootloader-assisted ramdump) flag, and residency numbers for C4/C5 are updated. USB role switch is enabled on Lenovo ThinkPad T14s and the ASUS Vivobook S15. The T14s also gains support for a second source trackpad. The Microsoft Surface Laptop gains LID switch and the USB Type-A connector attached to the multiport controller is enabled. The CRD has its HID device power supplies described. Application SMMU is flagged as DMA coherent across QDU1000, SC7180, SC8180X, SC8280XP, SDM670, SDM845, SM8150, SM8350, SM8450, and X1E80100. In addition to this, the effort to improve style and binding compliance continued. * tag 'qcom-arm64-for-6.13' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (120 commits) arm64: dts: qcom: sdm845-db845c-navigation-mezzanine: Add cma heap for libcamera softisp support arm64: dts: qcom: qrb5165-rb5-vision-mezzanine: Add cma heap for libcamera softisp support arm64: dts: qcom: qrb5165-rb5-vision-mezzanine: Drop redundant clock-lanes from camera@1a arm64: dts: qcom: sc8280xp-x13s: Drop redundant clock-lanes from camera@10 arm64: dts: qcom: sdm845-db845c-navigation-mezzanine: Convert mezzanine riser to dtso arm64: dts: qcom: qrb5165-rb5-vision-mezzanine: Convert mezzanine riser to dtbo arm64: dts: qcom: sm8450-hdk: model the PMU of the on-board wcn6855 arm64: dts: qcom: sc8280xp-x13s: model the PMU of the on-board wcn6855 arm64: dts: qcom: sc8280xp-crd: enable bluetooth arm64: dts: qcom: sc8280xp-crd: model the PMU of the on-board wcn6855 arm64: dts: qcom: qcs9100: Add support for the QCS9100 Ride and Ride Rev3 boards dt-bindings: arm: qcom: Document qcs9100-ride and qcs9100-ride Rev3 arm64: dts: qcom: x1e80100: Update C4/C5 residency/exit numbers arm64: dts: qcom: x1e80100-crd: describe HID supplies arm64: dts: qcom: msm8998-lenovo-miix-630: add WiFi calibration variant arm64: dts: qcom: msm8998-clamshell: enable resin/VolDown arm64: dts: qcom: msm8998-lenovo-miix-630: enable VolumeUp button arm64: dts: qcom: msm8998-lenovo-miix-630: enable aDSP and SLPI arm64: dts: qcom: msm8998-lenovo-miix-630: enable touchscreen arm64: dts: qcom: qcs6490-rb3gen2: Add PCIe nodes ... Link: https://lore.kernel.org/r/20241105164901.7787-1-andersson@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Arnd Bergmann
|
cbfa4e486e |
ARM: dts: OMAP updates for v6.13
Misc. minor updates for OMAP3, OMAP4, AM3 and DRA7 platforms. -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEEe4dGDhaSf6n1v/EMWTcYmtP7xmUFAmcpG0wACgkQWTcYmtP7 xmVAqA/+Mv7F+6LSiDQPMETWJ1N2V/AcFI88fIvsHryx1TaaIiqrsVZ02BJF/gRI w2CEBS7ioMmdNWgpT3OB3A1vaaoYNEX7NEYCapVR/loK5xwtnOoG3IZyHSQU7VcF np42qkzxnAbnafV2MYuDxadXstKYrU++M1kVshKY4rNo+db85Fk3yopofl4QHSfW yLQs1xSXj8Flw11fm0BIehENMYFUYvs0fwy1PJviw9GJhVzlBByd8groeiNBgl0K JMKq4/yi4xeI/5ooo7Ltlv+BEzP3UZzwTOjLRdiJYGbO8M6ScTHNmnRjrm5Cv+3o EC562u28czaZhhAbX1r9gVLsKvKO4FX5q8GNbYXtjVKGudkwGJKxsQlgqtBDmCJu YNvdhZTjgRFVKtFdjzfLyZXSvJX+9mzTSH4n3zncoJ4fbRrtpMrOoxEuadrrNP3X UPf1i23j42XjlHxgqzn80/jcZKMnK22JZ8Sd1vg8+Iq+huMGcLcPd5ICYcaP38uc UQaHjHt9Youw0PsKWzb0c6+55XotKYi8eHCwgX2uxiFj8XmjJmU/MGDR6Df0NJJZ Zjh77lwVptk3tsyddlzfmdx0uw4W1iwa4EMi7M8uxfxqpHIUNnTiTSGXuXovccAR IOtQEKhv1hdQXRienXPdkEznuR8o7G//lzb/B+us872qhOSRpKo= =tPAO -----END PGP SIGNATURE----- Merge tag 'omap-for-v6.13/dt-signed-1' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap into soc/dt ARM: dts: OMAP updates for v6.13 Misc. minor updates for OMAP3, OMAP4, AM3 and DRA7 platforms. * tag 'omap-for-v6.13/dt-signed-1' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap: ARM: dts: omap4-kc1: fix twl6030 power node ARM: dts: am335x-bone-common: Increase MDIO reset deassert delay to 50ms ARM: dts: ti/omap: omap4-epson-embt2ws: add charger ARM: dts: omap36xx: declare 1GHz OPP as turbo again ARM: ti/omap: omap3-gta04a5: add Bluetooth ARM: dts: ti/omap: dra7: fix redundant clock divider definition ARM: dts: ti/omap: use standard node name for twl4030 charger ARM: dts: omap: omap4-epson-embt2ws: add GPIO expander ARM: dts: omap: omap4-epson-embt2ws: add unknown gpio outputs ARM: dts: omap: omap4-epson-embt2ws: wire up regulators ARM: dts: omap: omap4-epson-embt2ws: define GPIO regulators ARM: dts: ti: dra7: Remove double include of clock bindings ARM: dts: ti: omap3434-sdp: drop linux,mtd-name from onenand node ARM: dts: ti: omap: am335x-baltos: drop "gpmc,device-nand" from NAND node ARM: dts: ti: drop linux,mtd-name from NAND nodes ARM: dts: ti/omap: Fix at24 EEPROM node names |
||
|
Arnd Bergmann
|
8cd0d9b997 |
Renesas DTS updates for v6.13 (take two)
- Add a CPU Operating Performance Points table for the RZ/V2H SoC,
- Add Battery Backup Function (VBATTB) and RTC support for the RZ/G3S
SoC and the RZ/G3S SMARC SoM,
- Add DMAC support for MMC on the RZ/A1H SoC and the Genmai
development board,
- Miscellaneous fixes and improvements.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCZyjGagAKCRCKwlD9ZEnx
cHrRAPsETRczaN2vpy+9m0EJuN+QhlX980jiLYndIx8YUvMG3QD/XdLdG4MnGQtg
2x8u2BfbbXOIrV2YWErVIVn/bQNAMgk=
=FjWC
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmczy8sACgkQYKtH/8kJ
UiewXw//cs/9vlIVVRkS/BUR3O2cMDvkbKqqoAuQjMHUXWyK4QR4e7+DiWm5LSeQ
XPn4ny+Aaq1W3Xms6fn5axiW0F34/RoyPDjYLfX9vikAfhPM+tX6MOkxF3hi+ZAw
laxl8vYjFe+NBXBB8MLF1ULRT8FViA/ND90QrDBRK9EIVM7B3YoDDTxwuG0eaCJj
inMRwvLQlxyHaspl4SLaiE1MfhkYe85203SWh6//7d1ZVTF9SKqMA7YjDqJ5Y32b
+SgDIyMALbOso7uZVaB7PkPVCQwWdrqf494eukROC+pJPvPkmnAiNox7aEBF0IOa
aBU3kMYUQ/VUUj8D7w3gD2ywYDcKG8tdWBpAGqe+XmJ2OmvQnpFzKZPkRL7EheAH
edR3Jd6XMi/9cGOxf3iSpWG/nE4ilKuDtz0QUHnpf6mqBLDeJxMoaq8a4F5HKb6x
upKm7rdVShbU5HCHnO/SANgXYt63IisO9KCoQkvEwEsxx3Yz6/xmjnX01x32HG94
FDQYizN6ZtJdjTJQQV0wLV8KMVlhRVtFsYwNSxwbCT172uyoUWqM9PdA2eQZciDQ
YtFBl1b+Qn0c77eN5dAbrbM2RmzmJ/dGjMreDwBB4gTh1NJanw8kzO940INXbVkz
41DvH2mqMQG8z/Z/8j7sVxJFPXJJrsDDlZLxhatY4lSa2X4gFjc=
=7QOY
-----END PGP SIGNATURE-----
Merge tag 'renesas-dts-for-v6.13-tag2' of https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/dt
Renesas DTS updates for v6.13 (take two)
- Add a CPU Operating Performance Points table for the RZ/V2H SoC,
- Add Battery Backup Function (VBATTB) and RTC support for the RZ/G3S
SoC and the RZ/G3S SMARC SoM,
- Add DMAC support for MMC on the RZ/A1H SoC and the Genmai
development board,
- Miscellaneous fixes and improvements.
* tag 'renesas-dts-for-v6.13-tag2' of https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
arm64: dts: renesas: rzg3s-smarc-som: Enable RTC
arm64: dts: renesas: rzg3s-smarc-som: Enable VBATTB
arm64: dts: renesas: r9a08g045: Add RTC node
arm64: dts: renesas: r9a08g045: Add VBATTB node
arm64: dts: renesas: white-hawk-cpu-common: Add pin control for DSI-eDP IRQ
ARM: dts: renesas: r7s72100: Add DMA support to MMCIF
ARM: dts: renesas: r7s72100: Add DMAC node
arm64: dts: renesas: hihope: Drop #sound-dai-cells
dt-bindings: clock: renesas,r9a08g045-vbattb: Document VBATTB
dt-bindings: clock: r9a08g045-cpg: Add power domain ID for RTC
arm64: dts: renesas: r9a09g057: Add OPP table
Link: https://lore.kernel.org/r/cover.1730726155.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
||
|
Arnd Bergmann
|
430851a9de |
i.MX ARM device tree changes for 6.13:
- New device support: Kobo Clara 2E, Comvetia LXR board, i.MX6DL DHCOM SoM on PDK2 carrier - A bunch of dt-schema warning fixes from Fabio Estevam - A set of changes from Hiago De Franco to update audio card for Apalis and Colibri devices - A series from Marek Vasut to improve pin config nodes according to bindings - A couple of changes from Sean Nyekjaer to add DMA support i.MX6UL UART ports - Other small and random changes -----BEGIN PGP SIGNATURE----- iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAmcog3gUHHNoYXduZ3Vv QGtlcm5lbC5vcmcACgkQUFdYWoewfM7rYAf+IAD92c4ybmxaG5OmhNapvIla9DhE 97ag0d7otHmT2NVj8tWlvbyuA3YioxqkVengNEZ5gQ44aex70eroiknesF38ix81 PQcfgLTXcK5ElrubnfCIau5CJfH3a5STRUJvZdg4B2VX2Pclmz/N/Mc1l5CzqZth xbi7Iuf8otjbq8RrvZ2Bu1GhEuXUrb9F+xBJAiVChlMLwapjgb8X6yPqfqouoiBa sFJquqsc2+j+uj2cF/x/noljtwSlvhjM0Bs9BEDaXEkcS8zXV62Iq6AEBibWDwdy Dw33psg+EdUeskIYWw+d3mYA4cQbSAAJ03i/lgYO0BaTgUMB46xVDvLf/g== =WHH7 -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmczyrwACgkQYKtH/8kJ Uifqhw/+Kd9D/UwMeS3w5TI5YnxwsyLSljm29wEVZ+I2iGR6b/pigLhqflzq7yTK pMPPJ2grCt4w9yicQpHqpE475mRwY7jw2TKXzCgxfv4X0DVqJCy11Wvr5kiQdihT 303p1HQgJiMXmQKzfSwvlr4whbGygRdayFa2er2V6LhC7aklQmNwdjjTeicEUNkJ MgXprN/WJus69vNPTT2J2Y12cxZF9vSE5HY8a4YkHLcZ4ldOq8pt8qqgX8yEWiQr ZuCNDrAMtR7JeAa2JD/760cus1Xp2lSeGCII7NoHRLN3xBxgco3bnZ51r36R3C7C 3AJ8sy15t2U1Z1aOtij50UlKL0+rrudgi4/y/NrJIOusJYD5kB+cUX0c1r0DH43n DTLzNKrpxv9pyWXUlsTucozSV8WJ/WrVRISMUrjjJn+NACrXRhWizbcQUb6a80Bx y0o1IednNfeY08bQwK7sjzdmhTfdDwX2+LRuMP1IceqGzeftoWHOqM03VXlF8x2j ETMK9rgmdO6LQF9ep+0QVdD+lgCbQ1HAKsJxRHdlcAU+EMTJWTIVyhKa4m7cQoMb 4kyajp2bAkYeuZmSjMzPvpxJcNYHHNC0GAqRVYqvU19/QBF8/TBN0Pum03je80mQ wEeeHpQ+5dYOup7xe141VMwMaY6z85qXjsQ6d+FllE41gdWyviE= =WHOI -----END PGP SIGNATURE----- Merge tag 'imx-dt-6.13' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dt i.MX ARM device tree changes for 6.13: - New device support: Kobo Clara 2E, Comvetia LXR board, i.MX6DL DHCOM SoM on PDK2 carrier - A bunch of dt-schema warning fixes from Fabio Estevam - A set of changes from Hiago De Franco to update audio card for Apalis and Colibri devices - A series from Marek Vasut to improve pin config nodes according to bindings - A couple of changes from Sean Nyekjaer to add DMA support i.MX6UL UART ports - Other small and random changes * tag 'imx-dt-6.13' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (39 commits) ARM: dts: imx: Add devicetree for Kobo Clara 2E ARM: dts: imx6sll: Improve gpc description ARM: dts: imx6sl: Pass tempmon #thermal-sensor-cells ARM: dts: imx6sx: Fix tempmon description ARM: dts: imx6sll: Remove regulator-3p0 unit address ARM: dts: imx6sll: Fix the last SPDIF clock name ARM: dts: imx7ulp: Remove incorrect mmc fallback compatible ARM: dts: imx6sl: Remove incorrect mmc fallback compatible ARM: dts: imx6sx: Remove incorrect mmc fallback compatible ARM: dts: imx6sl/sll: Add the "fsl,imx6dl-gpt" fallback ARM: dts: imx6ul: Drop duplicate space in iomux node groups ARM: dts: imx6sx: Align pin config nodes with bindings ARM: dts: imx6sl: imx6sll: Align pin config nodes with bindings ARM: dts: imx6qp: Align pin config nodes with bindings ARM: dts: imx6qdl: Align pin config nodes with bindings ARM: dts: imx6q: Align pin config nodes with bindings ARM: dts: imx6dl: Align pin config nodes with bindings ARM: dts: imx53: Align pin config nodes with bindings ARM: dts: imx51: Align pin config nodes with bindings ARM: dts: imx50: Align pin config nodes with bindings ... Link: https://lore.kernel.org/r/20241104090055.1881860-4-shawnguo2@yeah.net Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Arnd Bergmann
|
7e2574fafd |
Qualcomm Arm32 DeviceTree updates for v6.13
IPQ4019 flash partition scheme is moved to nvmem-layout. SDX55 and SDX65 PCIe EP controllers gain missing linux,pci-domain properties. Stylistic improvements across a range of platforms and devices. -----BEGIN PGP SIGNATURE----- iQJJBAABCAAzFiEEBd4DzF816k8JZtUlCx85Pw2ZrcUFAmcoQ6YVHGFuZGVyc3Nv bkBrZXJuZWwub3JnAAoJEAsfOT8Nma3FREcP/R6myVgG1NmZQT6J/mViqlVdNq+e rSo0/+RDQhtHp+05wn7IoHd1jf9GTuPskZ1NwZ4c2m2CSCkInywkUJj7S21mFUXx relHhzNSX12umBOndLWEqPzKblo4N4iRluSouZtJ2WlOT/SZ32facMNJ/WbyzTY2 l9uhmj6p5iWqm+Oggb/S1V78PyQ/OVVV7C3vLQLDdCINuSOl8M4MIcsKkPtimWJf 3ulS62IGWISpLZ4ivEb6E+005DImAE/PxtnWOihREtCMwEa9A83OwBccRSMNkAFM mdAOuCXfPyEJwySzGxA6tVUoh+yqq7Zfbd95s3hvatQIzzf5OQQ27PJ3C0n9Gq9k YIH9B57QFBnva8gUSwtYPGx6uo07l9msowsU2SdaWTiWlfcx064DF4W7AR4uzRJD F0GIV6krloPkFQNmrRiV/rBTVzsi5ZuMFbXQNCMn0KgY9M5VCwo+IqZUat91yMvv 7fxOCqDcJ4d9MOR11RNTqjqXaQS/Z/OtnTNOoTxCmcR4HBvOb1SDBRoVILTkPUV4 QHhDxrVFYL7q3wb/8RlbNgoXx4E+QPMnenVYtYeoXdjo6xVigGu2jFoCVGNFUTCO qx1zvbZnJHDRdvBPTBBj3Hroo1hnWAbrG0ev/Y2hbHMM0Xm8dVEFczL/ZdFfQqKO raWBtp8r3QuU2wcJ =fOIQ -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmczynMACgkQYKtH/8kJ UicQahAA2qEhnzn1Cn/mYnLI8qOZ0ugsE7z5M+xwBRpspzobytSQfz0HclUQhlZv NFUgPYpA0K5TxiaA+mVOTLAXktEpEo34b2cNDVRLa+t+XRMdNrvO/zPSqrA+eyaL kDcAqU9Y/tc3roKMyaq46lLsw5yK5AUZxaMSFr0Ph8cKxbtiNhIGOCcPEb8496iv 6dJ+0eqUx/lu1IjqxOrdpipvgw1o/AdIWL+t6mXwhGOkw5uu5hcQo+wczTAtTEcp Vr9PfHyPTVyGOpRrPtheT9UGr7coHQaoiGX2SvzoIBS+UMFN7/jDjeq95/03WFuN XaddwvnMnKcV7FrGUvBv8zoEBGGDkpFNlOPSwfWcnwB647YpbuhC+yJsAvbxr2XG /WdA1PO3fo1Sf+AoO4t4oOQk/5gHKScVovuUOfuhH1W36JFzLUt/VKMdtOfcgjbv 9tVqmzgiFBBNZyos97BzsglUAJDbjwXP8uM/Abm7K1iBIG/ax/nY9afRt1+fKbPb LagQuEr1sw5cdJM7Nc36tmvzU678dFVy1tHHbi7uj3wAlYnveyeSJw1MpjQZaQzW OCu1atP4vJltDvottaDE8jrIQHWJ986zbDhllewIVgw9aAHpFz+y2g0bYz3VA0a+ w8idVfwk7hYCvGy2AidpdxgAtrPlwQefBu2X6ytBQ0a3FB/etOQ= =dKCF -----END PGP SIGNATURE----- Merge tag 'qcom-arm32-for-6.13' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt Qualcomm Arm32 DeviceTree updates for v6.13 IPQ4019 flash partition scheme is moved to nvmem-layout. SDX55 and SDX65 PCIe EP controllers gain missing linux,pci-domain properties. Stylistic improvements across a range of platforms and devices. * tag 'qcom-arm32-for-6.13' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: ARM: dts: qcom: ipq4019: use nvmem-layout ARM: dts: qcom: change labels to lower-case ARM: dts: qcom: sdx65: Add 'linux,pci-domain' to PCIe EP controller node ARM: dts: qcom: sdx55: Add 'linux,pci-domain' to PCIe EP controller node ARM: dts: qcom: minor whitespace cleanup ARM: dts: qcom: drop underscore in node names Link: https://lore.kernel.org/r/20241104034744.14378-1-andersson@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Arnd Bergmann
|
2ffd61e39e |
SoCFPGA DTS updates for v6.13
- Fix dts warning for at24 EEPROM node names -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEoHhMeiyk5VmwVMwNGZQEC4GjKPQFAmclI/QACgkQGZQEC4Gj KPScFg//frhCSFcnzjhv5Cgd2U+ax1lv433na6P7ssqvVS4fW5e/6JUSV16c5nfP QZ/M8dU7TwqtAO7vdUyIqCp6VXHmEaYhZLpIREWwkdqHZChxFCvgIqsetIOA+W46 Ax7ctV3bmaLutw95LmC4nwdVykOWZhrQZmkmu76qbSm0cGTvY/u9i73q5B4Z3Vpt AD9QLN1sgBmCNdUiWcD+wMjcPi3CEfo47MKgwrz/xRgXGg1nWnyYWyewLe9LIHh9 i2TAlZD084ZH/ucDE5RPcxYkJdlAURMAYcSrwFi07PPd0vTUHsEBGisl2eWMsF6F db8Msqrqhavob1JXMUkQFJsugx0ahHVB1PgIuvkdEK7QpgiBb4eCaIYc0SNGhQ6x SxyyX+s/Zlofl799qMrMO7sE17/ydAgmRvkbn5tNHLIvtUka3v9iSxF5S0PDyoJ3 ZvozbWDEARTlRwBOWgWRA2rhqyrR2sIKByIEsiEgZXzfWVGNONOc1e4YYEr0o3BZ jB+QY/pVWdewiEDmwYqFeglPzXpe3kodZW4h+6davQtj7dLwEW7TxArxNjhce9Vz ptjfe4ziSNhcXAOypZ+xtbPQcjYLGtilXVWzTnPnFRl3zx46chH0VURQQlTqzHBJ YJ4w/Fhdt5IZQR77PaClqhCxAkfHtGxjukR7kyPI44UhTC/+418= =z2s3 -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmczylQACgkQYKtH/8kJ UicLnQ/9Gq/wYkb9CF5Bveu0xHUomL1jkUtVm9gjNqAH3bhohESxHl30mo04hrRY t128tNoYjy/jpyLbqo50nZryY/XcW83XFeOfmWPGzD2FbewJdkUCCuNyuz+fynMU HeW8H00UYm6IG9x0k8vo5Na+NZjBcO/Gk+as//Ood+8is7rA5gwGJdPUL+kR2Ko+ kpYQkHkDCgIY8swLCWm48Q3Nvc399VpKsoYZ39V3K9KEbTSC/n24SEHIUfiZTopn 5GOacHsEWZ5acgIsWOMF6/oXaxpq5Ik99PH/KxjRgxbtt+snIDLtg+X4knxo6RAB rN2LRrqnarCIEajhl2pS2TeYlhtev18d2C0wdO3668cQaxK3OpJyzHRoXeQ+rgI7 jzeceSVECttvdrQYM8Tkz4d+SOg2cN8TWo2uQqw6NbAtVfeVYhTML9zDr7Ajw6zJ jp0rs5lUrTREhPMA3QKmaCwgHDOnNFtAPhFXBtwmLc1J3Qbb0fj3tfxrAs0eqZv3 O6hh17O4Gpdx7eue1BZZpfyb3M6vL0u04br+Arqi42OcQ/BQ95DHU17TCwXE5PFh pG44QOhAOUDtK7OG8DamjleIpNm+NxoAMU10Yoqn/N1FDQnQ4rPjEELZJxcXIhjF IzrbCDU3MC2ryT5Ujw/ZgTivRtJbE9SCKuKQZE2BsKw9xdgceuo= =qSqI -----END PGP SIGNATURE----- Merge tag 'socfpga_dts_updates_for_v6.13' of https://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into soc/dt SoCFPGA DTS updates for v6.13 - Fix dts warning for at24 EEPROM node names * tag 'socfpga_dts_updates_for_v6.13' of https://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux: ARM: dts: socfpga: Fix at24 EEPROM node names Link: https://lore.kernel.org/r/20241101190046.912598-1-dinguyen@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Arnd Bergmann
|
98354868cf |
Ux500 DTS file updates for the v6.13 kernel cycle:
- Add touchkeys to the Samsung Codina variants - Re-work the Codina device tree for eMMC -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEElDRnuGcz/wPCXQWMQRCzN7AZXXMFAmcWO+QACgkQQRCzN7AZ XXO2kQ/+K4nkqiTevunRbLO7T/Et0+OEf860swhelWluRdG3uF/W+XiW8fm9VNsv TaVob2E5KZE9RwBwCyWRblMLYD1NVRGlQV8LiTBUS2I2D5k9lOb0zxg3yzIlpxUj v3w8FFhV0wqOY4BSiC02bjSN0bvSXjcVg2MnH1P8HrWbPZ6AxQaZWunPRV/HO3GC /kLCcIAuzqdL5kAkLifDySpissaUgByCYRyuQkxRfPEaeWVJmrKULi8OuyrWTQHo XBnfcRehte+bGaHKsu/MUkpP8mkBkB8bnChkwV5CgBGuXTxOmio0lLAzuNPfFLW+ ByktigWi0bq2C/pgXlAc8uNkGKq9X4DcQJq3v6JXonmfMsRYj8AMbqoNoKzcDAFE EWXR9cHcUPNolcfVjvWUwNXfw+fidUn0oI50UVyyQcjxmiLCsYumvY5JruxIYuvX /KrkmHCV7ZuoYVQ2nsYV47WSCoAepu6Rrp/jlX8jFRN1aSih+u6vGXBGmxq3lXY3 GCsTfvZcgKWI70bmvVUlHjl1ZV9iEQtospR+LIaUuQNrazwY2rmBEcFgx1vS4KU0 nGas3J8ur52U3b0bAFFpVT5R5hvvvcakCcGgCowSBRXgdfBvY0lMbLnOqHZ5iw5V 1v3vw0gl4fmEG0B0v3SNIWHm55KNVb4BQakmY5YCLLEjVz8Y8sA= =5+C+ -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmczyGkACgkQYKtH/8kJ UifhFQ//ckueR8b1ZE/3XmJ3HNPNJ9z7GYhZkZw6671dy/+IcnIswHiJKN9/xxbm hzsnL4eojqV1FiGzXefc3ePERhhKT22RzV3kDPH7/icwTn9t1g6iK7i5OJ0r0yPj 41mZLgHkddeE5LiUDiXOKmBMVIBPUuHKFg6gslWfFy9PBH4F0/8jSA97faVJODI0 Ujoz4fbLWZyCdebXKVLRQnCKBulcLAF7x7DN5iZ4HoXjKDtY+tlsJhsErBVw5NI0 L0eDs6vNJ2hTIeU2+j8nKJR7qCrOkyesPcNCMLBvcDPNJAeKdaMwME3upOV7IFpB R+O85VvAG79lG6oo5wBvGGn0l86s7cNJ15LAqsJUIqGFKrtViPYpz7DwKgUCCNWU OGPUftG9+Jd1sAzYczugjxgqFOI8MzYuQ/gWZaei8NICvsuJMgFr+er0q1FLH55q vJCc8V/y3Z/ORHOn5x0/QgPe8Mf0VS8kjTzUfkRqdbyEk9wHMMyJxVRqFR8E3ofY S2vakKHLSCipmcskbxvL1jC67qW1YOENwuGAqDbxhADRi1QFfNpI6r+DtdsRJ/an 6tyjDgTl1q06BfqQzKY8pBDu/GOSLMnug1moXc3Bgz9LL22JBFQLKSBN5oqyWfLX XnhznpavQX8FahohngxNa1Sk/F5wW8N/16CPwS239tL2F5MO9sM= =XL5S -----END PGP SIGNATURE----- Merge tag 'ux500-dts-for-v6.13' of https://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik into soc/dt Ux500 DTS file updates for the v6.13 kernel cycle: - Add touchkeys to the Samsung Codina variants - Re-work the Codina device tree for eMMC * tag 'ux500-dts-for-v6.13' of https://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik: ARM: dts: Reconfigure the MC2 eMMC interface ARM: dts: ux500: Add touchkeys to Codinas Link: https://lore.kernel.org/r/CACRpkda5rix2JLYpexXTeGqKBcHeWxZx7A49jYCCmDPU7CFLSA@mail.gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Arnd Bergmann
|
735ac12ee8 |
Renesas DTS updates for v6.13
- Add support for PCIe on the R-Car V4M SoC and the Gray Hawk
development board,
- Add support for watchdog, OS timer, keyboard switch, SDHI, and MMCIF
on the Genmai development board,
- Add support for watchdog on the RSK+RZA1 development board,
- Add support for QSPI NOR FLASH on the RZ/G2UL SMARC SoM,
- Add support for E-FUSE on the R-Car V3U, S4-8, V4H, and V4M SoCs,
- Use interrupts-extended where it makes sense,
- Miscellaneous fixes and improvements.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCZxJK7wAKCRCKwlD9ZEnx
cIc9AP9qfjKj9dER6XolPiFCNTVkQ4mUwXWSfw2tfcF7c14lQQEArTm1rPjJFnE6
ov1fEylEw6cf/lX63RAx1cO3b2RYOwQ=
=d+VK
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmczyE4ACgkQYKtH/8kJ
UiezOQ//VR2Hkzcr6q3DQLolO6p+DmbXCWmkj/q+xlRBSE+JUsPIE9TqK4Ajb+wa
b/EenZ1wLNtbtqjBuhKDH40Y0Qs2dbUTENBW0nJAegYouiTmFnJAvznOe4nyhKgT
3U8FDnW0Bh+rF078zNG1tsnJ4sO4SL4/ZHBHh4bPVMgyoeCovzofwdw7fu9UMlrV
zXzIPuroPfttgErJfLv7IxjXkQIeLXZn/Bf7Ezqn8RZTbtJOfku8xdwMkhhix4za
FFsECfehEBI/we2bUSxAKSd2z5/RynNbH/a6Zjsbwj+QytesL0e8qWfRZCURjsUF
KJWOpnKZ4ueTSeZdCzxZ1prt9OjJEY8Eh/pzcJWSHk9gYPnllQO7ma6NYaY6qklZ
pMoEfdPEN/VsNs68kq2OC89afb2R5hkbmPv0whj3PBNTbN5PC+G8fjKATe3jHMKr
1aXpP3f79hBIjGF817KioXPVRP6J1A18TYh0c0hHqDgvlC1MiHLW6Va5BTDibWNn
JiQgkYz+7lrJNS5ll8LiUVzUKxLF6gjcsMMCQqLuJfHDmyKGYKcJkZNGzJr7Mp9N
6w+4rYrIiKFzESXRFQPeeRRFOZtLmbuPIw6SzA8VvpY0VvueuYw5xXlXIUfCZYIn
hFsIk10LYPKi2V6d7LjjjbJZw9ic2IXzcwbkv1qEqlxML/WWMhQ=
=XVt1
-----END PGP SIGNATURE-----
Merge tag 'renesas-dts-for-v6.13-tag1' of https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/dt
Renesas DTS updates for v6.13
- Add support for PCIe on the R-Car V4M SoC and the Gray Hawk
development board,
- Add support for watchdog, OS timer, keyboard switch, SDHI, and MMCIF
on the Genmai development board,
- Add support for watchdog on the RSK+RZA1 development board,
- Add support for QSPI NOR FLASH on the RZ/G2UL SMARC SoM,
- Add support for E-FUSE on the R-Car V3U, S4-8, V4H, and V4M SoCs,
- Use interrupts-extended where it makes sense,
- Miscellaneous fixes and improvements.
* tag 'renesas-dts-for-v6.13-tag1' of https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: (53 commits)
arm64: dts: renesas: rzg3s-smarc: Use interrupts-extended for gpio-keys
arm64: dts: renesas: beacon-renesom: Use interrupts-extended for touchscreen
arm64: dts: renesas: Use interrupts-extended for WLAN
arm64: dts: renesas: Use interrupts-extended for video decoders
arm64: dts: renesas: Use interrupts-extended for USB muxes
arm64: dts: renesas: Use interrupts-extended for PMICs
arm64: dts: renesas: Use interrupts-extended for I/O expanders
arm64: dts: renesas: Use interrupts-extended for HDMI bridges
arm64: dts: renesas: Use interrupts-extended for Ethernet PHYs
arm64: dts: renesas: Use interrupts-extended for DisplayPort bridges
ARM: dts: renesas: kzm9g: Use interrupts-extended for sensors
ARM: dts: renesas: kzm9g: Use interrupts-extended for I/O expander
ARM: dts: renesas: r8a7742-iwg21m: Use interrupts-extended for RTC
ARM: dts: renesas: iwg22d-sodimm: Use interrupts-extended for port expander
ARM: dts: renesas: Use interrupts-extended for video decoders
ARM: dts: renesas: Use interrupts-extended for touchpanels
ARM: dts: renesas: Use interrupts-extended for PMICs
ARM: dts: renesas: Use interrupts-extended for HDMI bridges
ARM: dts: renesas: Use interrupts-extended for Ethernet PHYs
ARM: dts: renesas: Use interrupts-extended for Ethernet MACs
...
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
||
|
Sebastian Andrzej Siewior
|
c0b5195bad |
ARM: 9426/1: vfp: Move sending signals outside of vfp_state_hold()ed section.
VFP_bounce() is invoked from within vfp_support_entry() and may send a signal. Sending a signal uses spinlock_t which becomes a sleeping lock on PREEMPT_RT and must not be acquired within a preempt-disabled section. Move the vfp_raise_sigfpe() block outside of the vfp_state_hold() section. Reviewed-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> |
||
|
Sebastian Andrzej Siewior
|
27035c23ba |
ARM: 9425/1: vfp: Use vfp_state_hold() in vfp_support_entry().
vfp_entry() is invoked from exception handler and is fully preemptible. It uses local_bh_disable() to remain uninterrupted while checking the VFP state. This is not working on PREEMPT_RT because local_bh_disable() synchronizes the relevant section but the context remains fully preemptible. Use vfp_state_hold() for uninterrupted access. Reviewed-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> |
||
|
Sebastian Andrzej Siewior
|
b54cdbad4a |
ARM: 9424/1: vfp: Use vfp_state_hold() in vfp_sync_hwstate().
vfp_sync_hwstate() uses preempt_disable() followed by local_bh_disable() to ensure that it won't get interrupted while checking the VFP state. This harms PREEMPT_RT because softirq handling can get preempted and local_bh_disable() synchronizes the related section with a sleeping lock which does not work with disabled preemption. Use the vfp_state_hold() to synchronize the access. Reviewed-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> |
||
|
Sebastian Andrzej Siewior
|
f26bdbe1fa |
ARM: 9423/1: vfp: Provide vfp_state_hold() for VFP locking.
kernel_neon_begin() uses local_bh_disable() to ensure exclusive access to the VFP unit. This is broken on PREEMPT_RT because a BH disabled section remains preemptible on PREEMPT_RT. Introduce vfp_state_hold() which uses local_bh_disable() and preempt_disable() on PREEMPT_RT. Since softirqs are processed always in thread context, disabling preemption is enough to ensure that the current context won't get interrupted by something that is using the VFP. Use it in kernel_neon_begin(). Reviewed-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> |
||
|
Harith G
|
9e9b0cf931 |
ARM: 9420/1: smp: Fix SMP for xip kernels
Fix the physical address calculation of the following to get smp working on xip kernels. - secondary_data needed for secondary cpu bootup. - secondary_startup address passed through psci. - identity mapped code region needed for enabling mmu for secondary cpus. Signed-off-by: Harith George <harith.g@alifsemi.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> |
||
|
Harith G
|
ed6cbe6e55 |
ARM: 9419/1: mm: Fix kernel memory mapping for xip kernels
The patchset introducing kernel_sec_start/end variables to separate the
kernel/lowmem memory mappings, broke the mapping of the kernel memory
for xipkernels.
kernel_sec_start/end variables are in RO area before the MMU is switched
on for xipkernels.
So these cannot be set early in boot in head.S. Fix this by setting these
after MMU is switched on.
xipkernels need two different mappings for kernel text (starting at
CONFIG_XIP_PHYS_ADDR) and data (starting at CONFIG_PHYS_OFFSET).
Also, move the kernel code mapping from devicemaps_init() to map_kernel().
Fixes:
|