The error path in msi_domain_alloc(), frees the already allocated MSI
interrupts in a loop, but the loop condition terminates when the index
reaches zero, which fails to free the first allocated MSI interrupt at
index zero.
Check for >= 0 so that msi[0] is freed as well.
Fixes: f3cf8bb0d6c3 ("genirq: Add generic msi irq domain support")
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20241026063639.10711-1-ruanjinjie@huawei.com
-----BEGIN PGP SIGNATURE-----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=L3s9
-----END PGP SIGNATURE-----
Merge tag 'pci-v6.12-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Wait for device readiness after reset by polling Vendor ID and
looking for Configuration RRS instead of polling the Command
register and looking for non-error completions, to avoid hardware
retries done for RRS on non-Vendor ID reads (Bjorn Helgaas)
- Rename CRS Completion Status to RRS ('Request Retry Status') to
match PCIe r6.0 spec usage (Bjorn Helgaas)
- Clear LBMS bit after a manual link retrain so we don't try to
retrain a link when there's no downstream device anymore (Maciej W.
Rozycki)
- Revert to the original link speed after retraining fails instead of
leaving it restricted to 2.5GT/s, so a future device has a chance
to use higher speeds (Maciej W. Rozycki)
- Wait for each level of downstream bus, not just the first, to
become accessible before restoring devices on that bus (Ilpo
Järvinen)
- Add ARCH_PCI_DEV_GROUPS so s390 can add its own attribute_groups
without having to stomp on the core's pdev->dev.groups (Lukas
Wunner)
Driver binding:
- Export pcim_request_region(), a managed counterpart of
pci_request_region(), for use by drivers (Philipp Stanner)
- Export pcim_iomap_region() and deprecate pcim_iomap_regions()
(Philipp Stanner)
- Request the PCI BAR used by xboxvideo (Philipp Stanner)
- Request and map drm/ast BARs with pcim_iomap_region() (Philipp
Stanner)
MSI:
- Add MSI_FLAG_NO_AFFINITY flag for devices that mux MSIs onto a
single IRQ line and cannot set the affinity of each MSI to a
specific CPU core (Marek Vasut)
- Use MSI_FLAG_NO_AFFINITY and remove unnecessary .irq_set_affinity()
implementations in aardvark, altera, brcmstb, dwc, mediatek-gen3,
mediatek, mobiveil, plda, rcar, tegra, vmd, xilinx-nwl,
xilinx-xdma, and xilinx drivers to avoid 'IRQ: set affinity failed'
warnings (Marek Vasut)
Power management:
- Add pwrctl support for ATH11K inside the WCN6855 package (Konrad
Dybcio)
PCI device hotplug:
- Remove unnecessary hpc_ops struct from shpchp (ngn)
- Check for PCI_POSSIBLE_ERROR(), not 0xffffffff, in cpqphp
(weiyufeng)
Virtualization:
- Mark Creative Labs EMU20k2 INTx masking as broken (Alex Williamson)
- Add an ACS quirk for Qualcomm SA8775P, which doesn't advertise ACS
but does provide ACS-like features (Subramanian Ananthanarayanan)
IOMMU:
- Add function 0 DMA alias quirk for Glenfly Arise audio function,
which uses the function 0 Requester ID (WangYuli)
NPEM:
- Add Native PCIe Enclosure Management (NPEM) support for sysfs
control of NVMe RAID storage indicators (ok/fail/locate/
rebuild/etc) (Mariusz Tkaczyk)
- Add support for the ACPI _DSM PCIe SSD status LED management, which
is functionally similar to NPEM but mediated by platform firmware
(Mariusz Tkaczyk)
Device trees:
- Drop minItems and maxItems from ranges in PCI generic host binding
since host bridges may have several MMIO and I/O port apertures
(Frank Li)
- Add kirin, rcar-gen2, uniphier DT binding top-level constraints for
clocks (Krzysztof Kozlowski)
Altera PCIe controller driver:
- Convert altera DT bindings from text to YAML (Matthew Gerlach)
- Replace TLP_REQ_ID() with macro PCI_DEVID(), which does the same
thing and is what other drivers use (Jinjie Ruan)
Broadcom STB PCIe controller driver:
- Add DT binding maxItems for reset controllers (Jim Quinlan)
- Use the 'bridge' reset method if described in the DT (Jim Quinlan)
- Use the 'swinit' reset method if described in the DT (Jim Quinlan)
- Add 'has_phy' so the existence of a 'rescal' reset controller
doesn't imply software control of it (Jim Quinlan)
- Add support for many inbound DMA windows (Jim Quinlan)
- Rename SoC 'type' to 'soc_base' express the fact that SoCs come in
families of multiple similar devices (Jim Quinlan)
- Add Broadcom 7712 DT description and driver support (Jim Quinlan)
- Sort enums, pcie_offsets[], pcie_cfg_data, .compatible strings for
maintainability (Bjorn Helgaas)
Freescale i.MX6 PCIe controller driver:
- Add imx6q-pcie 'dbi2' and 'atu' reg-names for i.MX8M Endpoints
(Richard Zhu)
- Fix a code restructuring error that caused i.MX8MM and i.MX8MP
Endpoints to fail to establish link (Richard Zhu)
- Fix i.MX8MP Endpoint occasional failure to trigger MSI by enforcing
outbound alignment requirement (Richard Zhu)
- Call phy_power_off() in the .probe() error path (Frank Li)
- Rename internal names from imx6_* to imx_* since i.MX7/8/9 are also
supported (Frank Li)
- Manage Refclk by using SoC-specific callbacks instead of switch
statements (Frank Li)
- Manage core reset by using SoC-specific callbacks instead of switch
statements (Frank Li)
- Expand comments for erratum ERR010728 workaround (Frank Li)
- Use generic PHY APIs to configure mode, speed, and submode, which
is harmless for devices that implement their own internal PHY
management and don't set the generic imx_pcie->phy (Frank Li)
- Add i.MX8Q (i.MX8QM, i.MX8QXP, and i.MX8DXL) DT binding and driver
Root Complex support (Richard Zhu)
Freescale Layerscape PCIe controller driver:
- Replace layerscape-pcie DT binding compatible fsl,lx2160a-pcie with
fsl,lx2160ar2-pcie (Frank Li)
- Add layerscape-pcie DT binding deprecated 'num-viewport' property
to address a DT checker warning (Frank Li)
- Change layerscape-pcie DT binding 'fsl,pcie-scfg' to phandle-array
(Frank Li)
Loongson PCIe controller driver:
- Increase max PCI hosts to 8 for Loongson-3C6000 and newer chipsets
(Huacai Chen)
Marvell Aardvark PCIe controller driver:
- Fix issue with emulating Configuration RRS for two-byte reads of
Vendor ID; previously it only worked for four-byte reads (Bjorn
Helgaas)
MediaTek PCIe Gen3 controller driver:
- Add per-SoC struct mtk_gen3_pcie_pdata to support multiple SoC
types (Lorenzo Bianconi)
- Use reset_bulk APIs to manage PHY reset lines (Lorenzo Bianconi)
- Add DT and driver support for Airoha EN7581 PCIe controller
(Lorenzo Bianconi)
Qualcomm PCIe controller driver:
- Update qcom,pcie-sc7280 DT binding with eight interrupts (Rayyan
Ansari)
- Add back DT 'vddpe-3v3-supply', which was incorrectly removed
earlier (Johan Hovold)
- Drop endpoint redundant masking of global IRQ events (Manivannan
Sadhasivam)
- Clarify unknown global IRQ message and only log it once to avoid a
flood (Manivannan Sadhasivam)
- Add 'linux,pci-domain' property to endpoint DT binding (Manivannan
Sadhasivam)
- Assign PCI domain number for endpoint controllers (Manivannan
Sadhasivam)
- Add 'qcom_pcie_ep' and the PCI domain number to IRQ names for
endpoint controller (Manivannan Sadhasivam)
- Add global SPI interrupt for PCIe link events to DT binding
(Manivannan Sadhasivam)
- Add global RC interrupt handler to handle 'Link up' events and
automatically enumerate hot-added devices (Manivannan Sadhasivam)
- Avoid mirroring of DBI and iATU register space so it doesn't
overlap BAR MMIO space (Prudhvi Yarlagadda)
- Enable controller resources like PHY only after PERST# is
deasserted to partially avoid the problem that the endpoint SoC
crashes when accessing things when Refclk is absent (Manivannan
Sadhasivam)
- Add 16.0 GT/s equalization and RX lane margining settings (Shashank
Babu Chinta Venkata)
- Pass domain number to pci_bus_release_domain_nr() explicitly to
avoid a NULL pointer dereference (Manivannan Sadhasivam)
Renesas R-Car PCIe controller driver:
- Make the read-only const array 'check_addr' static (Colin Ian King)
- Add R-Car V4M (R8A779H0) PCIe host and endpoint to DT binding
(Yoshihiro Shimoda)
TI DRA7xx PCIe controller driver:
- Request IRQF_ONESHOT for 'dra7xx-pcie-main' IRQ since the primary
handler is NULL (Siddharth Vadapalli)
- Handle IRQ request errors during root port and endpoint probe
(Siddharth Vadapalli)
TI J721E PCIe driver:
- Add DT 'ti,syscon-acspcie-proxy-ctrl' and driver support to enable
the ACSPCIE module to drive Refclk for the Endpoint (Siddharth
Vadapalli)
- Extract the cadence link setup from cdns_pcie_host_setup() so link
setup can be done separately during resume (Thomas Richard)
- Add T_PERST_CLK_US definition for the mandatory delay between
Refclk becoming stable and PERST# being deasserted (Thomas Richard)
- Add j721e suspend and resume support (Théo Lebrun)
TI Keystone PCIe controller driver:
- Fix NULL pointer checking when applying MRRS limitation quirk for
AM65x SR 1.0 Errata #i2037 (Dan Carpenter)
Xilinx NWL PCIe controller driver:
- Fix off-by-one error in INTx IRQ handler that caused INTx
interrupts to be lost or delivered as the wrong interrupt (Sean
Anderson)
- Rate-limit misc interrupt messages (Sean Anderson)
- Turn off the clock on probe failure and device removal (Sean
Anderson)
- Add DT binding and driver support for enabling/disabling PHYs (Sean
Anderson)
- Add PCIe phy bindings for the ZCU102 (Sean Anderson)
Xilinx XDMA PCIe controller driver:
- Add support for Xilinx QDMA Soft IP PCIe Root Port Bridge to DT
binding and xilinx-dma-pl driver (Thippeswamy Havalige)
Miscellaneous:
- Fix buffer overflow in kirin_pcie_parse_port() (Alexandra Diupina)
- Fix minor kerneldoc issues and typos (Bjorn Helgaas)
- Use PCI_DEVID() macro in aer_inject() instead of open-coding it
(Jinjie Ruan)
- Check pcie_find_root_port() return in x86 fixups to avoid NULL
pointer dereferences (Samasth Norway Ananda)
- Make pci_bus_type constant (Kunwu Chan)
- Remove unused declarations of __pci_pme_wakeup() and
pci_vpd_release() (Yue Haibing)
- Remove any leftover .*.cmd files with make clean (zhang jiao)
- Remove unused BILLION macro (zhang jiao)"
* tag 'pci-v6.12-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (132 commits)
PCI: Fix typos
dt-bindings: PCI: qcom: Allow 'vddpe-3v3-supply' again
tools: PCI: Remove unused BILLION macro
tools: PCI: Remove .*.cmd files with make clean
PCI: Pass domain number to pci_bus_release_domain_nr() explicitly
PCI: dra7xx: Fix error handling when IRQ request fails in probe
PCI: dra7xx: Fix threaded IRQ request for "dra7xx-pcie-main" IRQ
PCI: qcom: Add RX lane margining settings for 16.0 GT/s
PCI: qcom: Add equalization settings for 16.0 GT/s
PCI: dwc: Always cache the maximum link speed value in dw_pcie::max_link_speed
PCI: dwc: Rename 'dw_pcie::link_gen' to 'dw_pcie::max_link_speed'
PCI: qcom-ep: Enable controller resources like PHY only after refclk is available
PCI: Mark Creative Labs EMU20k2 INTx masking as broken
dt-bindings: PCI: imx6q-pcie: Add reg-name "dbi2" and "atu" for i.MX8M PCIe Endpoint
dt-bindings: PCI: altera: msi: Convert to YAML
PCI: imx6: Add i.MX8Q PCIe Root Complex (RC) support
PCI: Rename CRS Completion Status to RRS
PCI: aardvark: Correct Configuration RRS checking
PCI: Wait for device readiness with Configuration RRS
PCI: brcmstb: Sort enums, pcie_offsets[], pcie_cfg_data, .compatible strings
...
Various PCI controllers that mux MSIs onto a single IRQ line produce these
"IRQ%d: set affinity failed" warnings when entering suspend. This has been
discussed before [1] [2] and an example test case is included at the end of
this commit message.
Controller drivers that create MSI IRQ domain with
MSI_FLAG_USE_DEF_CHIP_OPS and do not override the .irq_set_affinity()
irqchip callback get assigned the default msi_domain_set_affinity()
callback. That is not desired on controllers where it is not possible to
set affinity of each MSI IRQ line to a specific CPU core due to hardware
limitation.
Introduce flag MSI_FLAG_NO_AFFINITY, which keeps .irq_set_affinity() unset
if the controller driver did not assign it. This way, migrate_one_irq()
can exit right away, without printing the warning. The .irq_set_affinity()
implementations which only return -EINVAL can be removed from multiple
controller drivers.
$ grep 25 /proc/interrupts
25: 0 0 0 0 0 0 0 0 PCIe MSI 0 Edge PCIe PME
$ echo core > /sys/power/pm_test ; echo mem > /sys/power/state
...
Disabling non-boot CPUs ...
IRQ25: set affinity failed(-22). <---------- This is being silenced here
psci: CPU7 killed (polled 4 ms)
...
[1] https://lore.kernel.org/all/d4a6eea3c5e33a3a4056885419df95a7@kernel.org/
[2] https://lore.kernel.org/all/5f4947b18bf381615a37aa81c2242477@kernel.org/
Link: https://lore.kernel.org/r/20240723132958.41320-2-marek.vasut+renesas@mailbox.org
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
[bhelgaas: commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Now that the platform MSI hack is gone, nothing needs to know about struct
msi_device_data outside of the core code.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Shivamurthy Shastri <shivamurthy.shastri@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240623142236.003295177@linutronix.de
MSI functions for allocation and free can be directly used by
the device drivers without any wrapper provided by bus drivers.
So export these MSI functions.
Also, add a wrapper API to allocate MSIs providing only the
number of interrupts rather than range for simpler driver usage.
Signed-off-by: Nipun Gupta <nipun.gupta@amd.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240423111021.1686144-1-nipun.gupta@amd.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Some platform-MSI implementations require that power management is
redirected to the underlying interrupt chip device. To make this work
with per device MSI domains provide a new feature flag and let the
core code handle the setup of dev->pm_dev when set during device MSI
domain creation.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240127161753.114685-14-apatel@ventanamicro.com
To support wire to MSI bridges proper in the MSI core infrastructure it is
required to have separate allocation/free interfaces which can be invoked
from the regular irqdomain allocaton/free functions.
The mechanism for allocation is:
- Allocate the next free MSI descriptor index in the domain
- Store the hardware interrupt number and the trigger type
which was extracted by the irqdomain core from the firmware spec
in the MSI descriptor device cookie so it can be retrieved by
the underlying interrupt domain and interrupt chip
- Use the regular MSI allocation mechanism for the newly allocated
index which returns a fully initialized Linux interrupt on succes
This works because:
- the domains have a fixed size
- each hardware interrupt is only allocated once
- the underlying domain does not care about the MSI index it only cares
about the hardware interrupt number and the trigger type
The free function looks up the MSI index in the MSI descriptor of the
provided Linux interrupt number and uses the regular index based free
functions of the MSI core.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240127161753.114685-12-apatel@ventanamicro.com
To support wire to MSI domains via the MSI infrastructure it is required to
use the firmware node of the device which implements this for creating the
MSI domain. Otherwise the existing firmware match mechanisms to find the
correct irqdomain for a wired interrupt which is connected to a wire to MSI
bridge would fail.
This cannot be used for the general case because not all devices provide
firmware nodes and all regular per device MSI domains are directly
associated to the device and have not be searched for.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240127161753.114685-11-apatel@ventanamicro.com
In preparation for providing a special allocation function for wired
interrupts which are connected to a wire to MSI bridge, split the inner
workings of msi_domain_alloc_irq_at() out into a helper function so the
code can be shared.
No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240127161753.114685-9-apatel@ventanamicro.com
irq_create_fwspec_mapping() requires translation of the firmware spec to a
hardware interrupt number and the trigger type information.
Wired interrupts which are connected to a wire to MSI bridge, like MBIGEN
are allocated that way. So far MBIGEN provides a regular irqdomain which
then hooks backwards into the MSI infrastructure. That's an unholy mess and
will be replaced with per device MSI domains which are regular MSI domains.
Interrupts on MSI domains are not supported by irq_create_fwspec_mapping(),
but for making the wire to MSI bridges sane it makes sense to provide a
special allocation/free interface in the MSI infrastructure. That avoids
the backdoors into the core MSI allocation code and just shares all the
regular MSI infrastructure.
Provide an optional translation callback in msi_domain_ops which can be
utilized by these wire to MSI bridges. No other MSI domain should provide a
translation callback. The default translation callback of the MSI
irqdomains will warn when it is invoked on a non-prepared MSI domain.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240127161753.114685-8-apatel@ventanamicro.com
commit ef8dd01538ea ("genirq/msi: Make interrupt allocation less
convoluted"), reworked the code so that the x86 specific quirk for affinity
setting of non-maskable PCI/MSI interrupts is not longer activated if
necessary.
This could be solved by restoring the original logic in the core MSI code,
but after a deeper analysis it turned out that the quirk flag is not
required at all.
The quirk is only required when the PCI/MSI device cannot mask the MSI
interrupts, which in turn also prevents reservation mode from being enabled
for the affected interrupt.
This allows ot remove the NOMASK quirk bit completely as msi_set_affinity()
can instead check whether reservation mode is enabled for the interrupt,
which gives exactly the same answer.
Even in the momentary non-existing case that the reservation mode would be
not set for a maskable MSI interrupt this would not cause any harm as it
just would cause msi_set_affinity() to go needlessly through the
functionaly equivalent slow path, which works perfectly fine with maskable
interrupts as well.
Rework msi_set_affinity() to query the reservation mode and remove all
NOMASK quirk logic from the core code.
[ tglx: Massaged changelog ]
Fixes: ef8dd01538ea ("genirq/msi: Make interrupt allocation less convoluted")
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Koichiro Den <den@valinux.co.jp>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20231026032036.2462428-1-den@valinux.co.jp
Commit bf5e758f02fc ("genirq/msi: Simplify sysfs handling") reworked the
creation of sysfs entries for MSI IRQs. The creation used to be in
msi_domain_alloc_irqs_descs_locked after calling ops->domain_alloc_irqs.
Then it moved into __msi_domain_alloc_irqs which is an implementation of
domain_alloc_irqs. However, Xen comes with the only other implementation
of domain_alloc_irqs and hence doesn't run the sysfs population code
anymore.
Commit 6c796996ee70 ("x86/pci/xen: Fixup fallout from the PCI/MSI
overhaul") set the flag MSI_FLAG_DEV_SYSFS for the xen msi_domain_info
but that doesn't actually have an effect because Xen uses it's own
domain_alloc_irqs implementation.
Fix this by making use of the fallback functions for sysfs population.
Fixes: bf5e758f02fc ("genirq/msi: Simplify sysfs handling")
Signed-off-by: Maximilian Heyne <mheyne@amazon.de>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20230503131656.15928-1-mheyne@amazon.de
Signed-off-by: Juergen Gross <jgross@suse.com>
- Prevent possible NULL pointer derefences in irq_data_get_affinity_mask()
and irq_domain_create_hierarchy().
- Take the per device MSI lock before invoking code which relies
on it being hold.
- Make sure that MSI descriptors are unreferenced before freeing
them. This was overlooked when the platform MSI code was converted to
use core infrastructure and results in a fals positive warning.
- Remove dead code in the MSI subsystem.
- Clarify the documentation for pci_msix_free_irq().
- More kobj_type constification.
-----BEGIN PGP SIGNATURE-----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=jWot
-----END PGP SIGNATURE-----
Merge tag 'irq-urgent-2023-03-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq updates from Thomas Gleixner:
"A set of updates for the interrupt susbsystem:
- Prevent possible NULL pointer derefences in
irq_data_get_affinity_mask() and irq_domain_create_hierarchy()
- Take the per device MSI lock before invoking code which relies on
it being hold
- Make sure that MSI descriptors are unreferenced before freeing
them. This was overlooked when the platform MSI code was converted
to use core infrastructure and results in a fals positive warning
- Remove dead code in the MSI subsystem
- Clarify the documentation for pci_msix_free_irq()
- More kobj_type constification"
* tag 'irq-urgent-2023-03-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
genirq/msi, platform-msi: Ensure that MSI descriptors are unreferenced
genirq/msi: Drop dead domain name assignment
irqdomain: Add missing NULL pointer check in irq_domain_create_hierarchy()
genirq/irqdesc: Make kobj_type structures constant
PCI/MSI: Clarify usage of pci_msix_free_irq()
genirq/msi: Take the per-device MSI lock before validating the control structure
genirq/ipi: Fix NULL pointer deref in irq_data_get_affinity_mask()
Miquel reported a warning in the MSI core which is triggered when
interrupts are freed via platform_msi_device_domain_free().
This code got reworked to use core functions for freeing the MSI
descriptors, but nothing took care to clear the msi_desc->irq entry, which
then triggers the warning in msi_free_msi_desc() which uses desc->irq to
validate that the descriptor has been torn down. The same issue exists in
msi_domain_populate_irqs().
Up to the point that msi_free_msi_descs() grew a warning for this case,
this went un-noticed.
Provide the counterpart of msi_domain_populate_irqs() and invoke it in
platform_msi_device_domain_free() before freeing the interrupts and MSI
descriptors and also in the error path of msi_domain_populate_irqs().
Fixes: 2f2940d16823 ("genirq/msi: Remove filter from msi_free_descs_free_range()")
Reported-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Miquel Raynal <miquel.raynal@bootlin.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/87mt4wkwnv.ffs@tglx
Since commit d59f6617eef0 ("genirq: Allow fwnode to carry name
information only") an IRQ domain is always given a name during
allocation (e.g. used for the debugfs entry).
Drop the unused fallback name assignment when creating MSI domains.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20230224130509.27814-1-johan+linaro@kernel.org
Calling msi_ctrl_valid() ultimately results in calling
msi_get_device_domain(), which requires holding the device MSI lock.
However, in msi_domain_populate_irqs() the lock is taken right after having
called msi_ctrl_valid(), which is just a tad too late.
Take the lock before invoking msi_ctrl_valid().
Fixes: 40742716f294 ("genirq/msi: Make msi_add_simple_msi_descs() device domain aware")
Reported-by: "Russell King (Oracle)" <linux@armlinux.org.uk>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/Y/Opu6ETe3ZzZ/8E@shell.armlinux.org.uk
Link: https://lore.kernel.org/r/20230220190101.314446-1-maz@kernel.org
msi_create_device_irq_domain() creates a firmware node for the new domain,
which is never freed. kmemleak reports:
unreferenced object 0xffff888120ba9a00 (size 96):
comm "systemd-modules", pid 221, jiffies 4294893411 (age 635.732s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 e0 19 8b 83 ff ff ff ff ................
00 00 00 00 00 00 00 00 18 9a ba 20 81 88 ff ff ........... ....
backtrace:
[<000000008cdbc98d>] __irq_domain_alloc_fwnode+0x51/0x2b0
[<00000000c57acf9d>] msi_create_device_irq_domain+0x283/0x670
[<000000009b567982>] __pci_enable_msix_range+0x49e/0xdb0
[<0000000077cc1445>] pci_alloc_irq_vectors_affinity+0x11f/0x1c0
[<00000000532e9ef5>] mlx5_irq_table_create+0x24c/0x940 [mlx5_core]
[<00000000fabd2b80>] mlx5_load+0x1fa/0x680 [mlx5_core]
[<000000006bb22ae4>] mlx5_init_one+0x485/0x670 [mlx5_core]
[<00000000eaa5e1ad>] probe_one+0x4c2/0x720 [mlx5_core]
[<00000000df8efb43>] local_pci_probe+0xd6/0x170
[<0000000085cb9924>] pci_device_probe+0x231/0x6e0
Use the proper free operation for the firmware wnode so the name is freed
during error unwind of msi_create_device_irq_domain() and also free the
node in msi_remove_device_irq_domain() if it was automatically allocated.
To avoid extra NULL pointer checks make irq_domain_free_fwnode() tolerant
of NULL.
Fixes: 27a6dea3ebaa ("genirq/msi: Provide msi_create/free_device_irq_domain()")
Reported-by: Omri Barazi <obarazi@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Kalle Valo <kvalo@kernel.org>
Tested-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/0-v2-24af6665e2da+c9-msi_leak_jgg@nvidia.com
s390 doesn't use irq_domains, so it has no place to set
IRQ_DOMAIN_FLAG_ISOLATED_MSI. Instead of continuing to abuse the iommu
subsystem to convey this information add a simple define which s390 can
make statically true. The define will cause msi_device_has_isolated() to
return true.
Remove IOMMU_CAP_INTR_REMAP from the s390 iommu driver.
Link: https://lore.kernel.org/r/8-v3-3313bb5dd3a3+10f11-secure_msi_jgg@nvidia.com
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Tested-by: Matthew Rosato <mjrosato@linux.ibm.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
What x86 calls "interrupt remapping" is one way to achieve isolated MSI,
make it clear this is talking about isolated MSI, no matter how it is
achieved. This matches the new driver facing API name of
msi_device_has_isolated_msi()
No functional change.
Link: https://lore.kernel.org/r/6-v3-3313bb5dd3a3+10f11-secure_msi_jgg@nvidia.com
Tested-by: Matthew Rosato <mjrosato@linux.ibm.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
This will replace irq_domain_check_msi_remap() in following patches.
The new API makes it more clear what "msi_remap" actually means from a
functional perspective instead of identifying an implementation specific
HW feature.
Isolated MSI means that HW modeled by an irq_domain on the path from the
initiating device to the CPU will validate that the MSI message specifies
an interrupt number that the device is authorized to trigger. This must
block devices from triggering interrupts they are not authorized to
trigger. Currently authorization means the MSI vector is one assigned to
the device.
This is interesting for securing VFIO use cases where a rouge MSI (eg
created by abusing a normal PCI MemWr DMA) must not allow the VFIO
userspace to impact outside its security domain, eg userspace triggering
interrupts on kernel drivers, a VM triggering interrupts on the
hypervisor, or a VM triggering interrupts on another VM.
As this is actually modeled as a per-irq_domain property, not a global
platform property, correct the interface to accept the device parameter
and scan through only the part of the irq_domains hierarchy originating
from the source device.
Locate the new code in msi.c as it naturally only works with
CONFIG_GENERIC_MSI_IRQ, which also requires CONFIG_IRQ_DOMAIN and
IRQ_DOMAIN_HIERARCHY.
Link: https://lore.kernel.org/r/1-v3-3313bb5dd3a3+10f11-secure_msi_jgg@nvidia.com
Tested-by: Matthew Rosato <mjrosato@linux.ibm.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
On architectures such as s390 that do not use irq domains for MSI,
returning 0 as the maximum MSI index is a bit counter-productive,
as it indicates that no MSI can be allocated. Bad idea.
Instead, return the maximum we're willing to support in the MSI
backing store (MSI_XA_DOMAIN_SIZE), and let the arch code do its
usual thing.
Thanks to Matthew Rosato for fixing the fix.
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
[maz: commit message]
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/87fsdgzpqs.ffs@tglx
For architectures such as s390 and powerpc that do not use
irq domains for MSIs, dev->msi.domain is always NULL, so
the per-device, per-bus MSI domain is also guaranteed to
be NULL.
So checking one without checking the other is bound to result
in a splat, followed by a memory leak as we don't free the MSI
descriptors.
Add the missing check.
Reported-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/e570e70d-19bc-101b-0481-ff9a3cab3504@linux.ibm.com
For supporting post MSI-X enable allocations and for the upcoming PCI/IMS
support a separate interface is required which allows not only the
allocation of a specific index, but also the allocation of any, i.e. the
next free index. The latter is especially required for IMS because IMS
completely does away with index to functionality mappings which are
often found in MSI/MSI-X implementation.
But even with MSI-X there are devices where only the first few indices have
a fixed functionality and the rest is freely assignable by software,
e.g. to queues.
msi_domain_alloc_irq_at() is also different from the range based interfaces
as it always enforces that the MSI descriptor is allocated by the core code
and not preallocated by the caller like the PCI/MSI[-X] enable code path
does.
msi_domain_alloc_irq_at() can be invoked with the index argument set to
MSI_ANY_INDEX which makes the core code pick the next free index. The irq
domain can provide a prepare_desc() operation callback in it's
msi_domain_ops to do domain specific post allocation initialization before
the actual Linux interrupt and the associated interrupt descriptor and
hierarchy alloccations are conducted.
The function also takes an optional @icookie argument which is of type
union msi_instance_cookie. This cookie is not used by the core code and is
stored in the allocated msi_desc::data::icookie. The meaning of the cookie
is completely implementation defined. In case of IMS this might be a PASID
or a pointer to a device queue, but for the MSI core it's opaque and not
used in any way.
The function returns a struct msi_map which on success contains the
allocated index number and the Linux interrupt number so the caller can
spare the index to Linux interrupt number lookup.
On failure map::index contains the error code and map::virq is 0.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221124232326.501359457@linutronix.de
The existing MSI domain ops msi_prepare() and set_desc() turned out to be
unsuitable for implementing IMS support.
msi_prepare() does not operate on the MSI descriptors. set_desc() lacks
an irq_domain pointer and has a completely different purpose.
Introduce a prepare_desc() op which allows IMS implementations to amend an
MSI descriptor which was allocated by the core code, e.g. by adjusting the
iomem base or adding some data based on the allocated index. This is way
better than requiring that all IMS domain implementations preallocate the
MSI descriptor and then allocate the interrupt.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221124232326.444560717@linutronix.de
Provide new bus tokens for the upcoming per device PCI/MSI and PCI/MSIX
interrupt domains.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221124232325.917219885@linutronix.de
Per device domains provide the real domain size to the core code. This
allows range checking on insertion of MSI descriptors and also paves the
way for dynamic index allocations which are required e.g. for IMS. This
avoids external mechanisms like bitmaps on the device side and just
utilizes the core internal MSI descriptor storxe for it.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221124232325.798556374@linutronix.de
Provide an interface to match a per device domain bus token. This allows to
query which type of domain is installed for a particular domain id. Will be
used for PCI to avoid frequent create/remove cycles for the MSI resp. MSI-X
domains.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221124232325.738047902@linutronix.de
Now that all prerequsites are in place, provide the actual interfaces for
creating and removing per device interrupt domains.
MSI device interrupt domains are created from the provided
msi_domain_template which is duplicated so that it can be modified for the
particular device.
The name of the domain and the name of the interrupt chip are composed by
"$(PREFIX)$(CHIPNAME)-$(DEVNAME)"
$PREFIX: The optional prefix provided by the underlying MSI parent domain
via msi_parent_ops::prefix.
$CHIPNAME: The name of the irq_chip in the template
$DEVNAME: The name of the device
The domain is further initialized through a MSI parent domain callback which
fills in the required functionality for the parent domain or domains further
down the hierarchy. This initialization can fail, e.g. when the requested
feature or MSI domain type cannot be supported.
The domain pointer is stored in the pointer array inside of msi_device_data
which is attached to the domain.
The domain can be removed via the API or left for disposal via devres when
the device is torn down. The API removal is useful e.g. for PCI to have
seperate domains for MSI and MSI-X, which are mutually exclusive and always
occupy the default domain id slot.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221124232325.678838546@linutronix.de
Split the functionality of msi_create_irq_domain() so it can
be reused for creating per device irq domains.
No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221124232325.559086358@linutronix.de
To allow proper range checking especially for dynamic allocations add a
size field to struct msi_domain_info. If the field is 0 then the size is
unknown or unlimited (up to MSI_MAX_INDEX) to provide backwards
compability.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221124232325.501144862@linutronix.de
MSI parent domains must have some control over the MSI domains which are
built on top. On domain creation they need to fill in e.g. architecture
specific chip callbacks or msi domain ops to make the outermost domain
parent agnostic which is obviously required for architecture independence
etc.
The structure contains:
1) A bitfield which exposes the supported functional features. This
allows to check for features and is also used in the initialization
callback to mask out unsupported features when the actual domain
implementation requests a broader range, e.g. on x86 PCI multi-MSI
is only supported by remapping domains but not by the underlying
vector domain. The PCI/MSI code can then always request multi-MSI
support, but the resulting feature set after creation might not
have it set.
2) An optional string prefix which is put in front of domain and chip
names during creation of the MSI domain. That allows to keep the
naming schemes e.g. on x86 where PCI-MSI domains have a IR- prefix
when interrupt remapping is enabled.
3) An initialization callback to sanity check the domain info of
the to be created MSI domain, to restrict features and to
apply changes in MSI ops and interrupt chip callbacks to
accomodate to the particular MSI parent implementation and/or
the underlying hierarchy.
Add a conveniance function to delegate the initialization from the
MSI parent domain to an underlying domain in the hierarchy.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221124232325.382485843@linutronix.de
Now that all users are converted remove the old interfaces.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221124230314.694291814@linutronix.de
Provide two sorts of interfaces to handle the different use cases:
- msi_domain_alloc_irqs_range():
Handles a caller defined precise range
- msi_domain_alloc_irqs_all():
Allocates all interrupts associated to a domain by scanning the
allocated MSI descriptors
The latter is useful for the existing PCI/MSI support which does not have
range information available.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221124230314.396497163@linutronix.de
Provide two sorts of interfaces to handle the different use cases:
- msi_domain_free_irqs_range():
Handles a caller defined precise range
- msi_domain_free_irqs_all():
Frees all interrupts associated to a domain
The latter is useful for device teardown and to handle the legacy MSI support
which does not have any range information available.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221124230314.337844751@linutronix.de
Allocating simple interrupt descriptors in the core code has to be multi
device irqdomain aware for the upcoming PCI/IMS support.
Change the interfaces to take a domain id into account. Use the internal
control struct for transport of arguments.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221124230314.279112474@linutronix.de
Change the descriptor free functions to take a domain id to prepare for the
upcoming multi MSI domain per device support.
To avoid changing and extending the interfaces over and over use an core
internal control struct and hand the pointer through the various functions.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221124230314.220788011@linutronix.de
Change the descriptor allocation and insertion functions to take a domain
id to prepare for the upcoming multi MSI domain per device support.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221124230314.163043028@linutronix.de
This reflects the functionality better. No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221124230314.103554618@linutronix.de
In preparation of the upcoming per device multi MSI domain support, change
the interface to support lookups based on domain id and zero based index
within the domain.
Signed-off-by: Ahmed S. Darwish <darwi@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221124230314.044613697@linutronix.de
To support multiple MSI interrupt domains per device it is necessary to
segment the xarray MSI descriptor storage. Each domain gets up to
MSI_MAX_INDEX entries.
Change the iterators so they operate with domain ids and take the domain
offsets into account.
The publicly available iterators which are mostly used in legacy
implementations and the PCI/MSI core default to MSI_DEFAULT_DOMAIN (0)
which is the id for the existing "global" domains.
No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221124230313.985498981@linutronix.de
With the upcoming per device MSI interrupt domain support it is necessary
to store the domain pointers per device.
Instead of delegating that storage to device drivers or subsystems add a
domain pointer to the msi_dev_domain array in struct msi_device_data.
This pointer is also used to take care of tearing down the irq domains when
msi_device_data is cleaned up via devres.
The interfaces into the MSI core will be changed from irqdomain pointer
based interfaces to domain id based interfaces to support multiple MSI
domains on a single device (e.g. PCI/MSI[-X] and PCI/IMS.
Once the per device domain support is complete the irq domain pointer in
struct device::msi.domain will not longer contain a pointer to the "global"
MSI domain. It will contain a pointer to the MSI parent domain instead.
It would be a horrible maze of conditionals to evaluate all over the place
which domain pointer should be used, i.e. the "global" one in
device::msi::domain or one from the internal pointer array.
To avoid this evaluate in msi_setup_device_data() whether the irq domain
which is associated to a device is a "global" or a parent MSI domain. If it
is global then copy the pointer into the first entry of the msi_dev_domain
array.
This allows to convert interfaces and implementation to domain ids while
keeping everything existing working.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221124230313.923860399@linutronix.de
The upcoming support for multiple MSI domains per device requires storage
for the MSI descriptors and in a second step storage for the irqdomain
pointers.
Move the xarray into a separate data structure msi_dev_domain and create an
array with size 1 in msi_device_data, which can be expanded later when the
support for per device domains is implemented.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221124230313.864887773@linutronix.de
In the upcoming per device MSI domain concept the MSI parent domains are
not allowed to be used as regular MSI domains where the MSI allocation/free
operations are applicable.
Add appropriate checks.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221124230313.806128070@linutronix.de
It's truly a MSI only flag and for the upcoming per device MSI domains this
must be in the MSI flags so it can be set during domain setup without
exposing this quirk outside of x86.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221124230313.454246167@linutronix.de
Adjust to reality and remove another layer of pointless Kconfig
indirection. CONFIG_GENERIC_MSI_IRQ is good enough to serve
all purposes.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20221111122014.524842979@linutronix.de
Add a bus token member to struct msi_domain_info and let
msi_create_irq_domain() set the bus token.
That allows to remove the bus token updates at the call sites.
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ahmed S. Darwish <darwi@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20221111122014.294554462@linutronix.de
