The CPU and on-disk keys are mapped to two different structures because
of the endianness. There's an intermediate buffer used to do the
conversion, but this is not necessary when CPU and on-disk endianness
match.
Add optimized versions of helpers that take disk_key and use the buffer
directly for CPU keys or drop the intermediate buffer and conversion.
This saves a lot of stack space accross many functions and removes about
6K of generated binary code:
text data bss dec hex filename
1090439 17468 14912 1122819 112203 pre/btrfs.ko
1084613 17456 14912 1116981 110b35 post/btrfs.ko
Delta: -5826
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Before this patch, qgroup completely relies on per-inode extent io tree
to detect reserved data space leak.
However previous bug has already shown how release page before
btrfs_finish_ordered_io() could lead to leak, and since it's
QGROUP_RESERVED bit cleared without triggering qgroup rsv, it can't be
detected by per-inode extent io tree.
So this patch adds another (and hopefully the final) safety net to catch
qgroup data reserved space leak. At least the new safety net catches
all the leaks during development, so it should be pretty useful in the
real world.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[BUG]
The following simple workload from fsstress can lead to qgroup reserved
data space leak:
0/0: creat f0 x:0 0 0
0/0: creat add id=0,parent=-1
0/1: write f0[259 1 0 0 0 0] [600030,27288] 0
0/4: dwrite - xfsctl(XFS_IOC_DIOINFO) f0[259 1 0 0 64 627318] return 25, fallback to stat()
0/4: dwrite f0[259 1 0 0 64 627318] [610304,106496] 0
This would cause btrfs qgroup to leak 20480 bytes for data reserved
space. If btrfs qgroup limit is enabled, such leak can lead to
unexpected early EDQUOT and unusable space.
[CAUSE]
When doing direct IO, kernel will try to writeback existing buffered
page cache, then invalidate them:
generic_file_direct_write()
|- filemap_write_and_wait_range();
|- invalidate_inode_pages2_range();
However for btrfs, the bi_end_io hook doesn't finish all its heavy work
right after bio ends. In fact, it delays its work further:
submit_extent_page(end_io_func=end_bio_extent_writepage);
end_bio_extent_writepage()
|- btrfs_writepage_endio_finish_ordered()
|- btrfs_init_work(finish_ordered_fn);
<<< Work queue execution >>>
finish_ordered_fn()
|- btrfs_finish_ordered_io();
|- Clear qgroup bits
This means, when filemap_write_and_wait_range() returns,
btrfs_finish_ordered_io() is not guaranteed to be executed, thus the
qgroup bits for related range are not cleared.
Now into how the leak happens, this will only focus on the overlapping
part of buffered and direct IO part.
1. After buffered write
The inode had the following range with QGROUP_RESERVED bit:
596 616K
|///////////////|
Qgroup reserved data space: 20K
2. Writeback part for range [596K, 616K)
Write back finished, but btrfs_finish_ordered_io() not get called
yet.
So we still have:
596K 616K
|///////////////|
Qgroup reserved data space: 20K
3. Pages for range [596K, 616K) get released
This will clear all qgroup bits, but don't update the reserved data
space.
So we have:
596K 616K
| |
Qgroup reserved data space: 20K
That number doesn't match the qgroup bit range anymore.
4. Dio prepare space for range [596K, 700K)
Qgroup reserved data space for that range, we got:
596K 616K 700K
|///////////////|///////////////////////|
Qgroup reserved data space: 20K + 104K = 124K
5. btrfs_finish_ordered_range() gets executed for range [596K, 616K)
Qgroup free reserved space for that range, we got:
596K 616K 700K
| |///////////////////////|
We need to free that range of reserved space.
Qgroup reserved data space: 124K - 20K = 104K
6. btrfs_finish_ordered_range() gets executed for range [596K, 700K)
However qgroup bit for range [596K, 616K) is already cleared in
previous step, so we only free 84K for qgroup reserved space.
596K 616K 700K
| | |
We need to free that range of reserved space.
Qgroup reserved data space: 104K - 84K = 20K
Now there is no way to release that 20K unless disabling qgroup or
unmounting the fs.
[FIX]
This patch will change the timing of btrfs_qgroup_release/free_data()
call. Here it uses buffered COW write as an example.
The new timing | The old timing
----------------------------------------+---------------------------------------
btrfs_buffered_write() | btrfs_buffered_write()
|- btrfs_qgroup_reserve_data() | |- btrfs_qgroup_reserve_data()
|
btrfs_run_delalloc_range() | btrfs_run_delalloc_range()
|- btrfs_add_ordered_extent() |
|- btrfs_qgroup_release_data() |
The reserved is passed into |
btrfs_ordered_extent structure |
|
btrfs_finish_ordered_io() | btrfs_finish_ordered_io()
|- The reserved space is passed to | |- btrfs_qgroup_release_data()
btrfs_qgroup_record | The resereved space is passed
| to btrfs_qgroup_recrod
|
btrfs_qgroup_account_extents() | btrfs_qgroup_account_extents()
|- btrfs_qgroup_free_refroot() | |- btrfs_qgroup_free_refroot()
The point of such change is to ensure, when ordered extents are
submitted, the qgroup reserved space is already released, to keep the
timing aligned with file_write_and_wait_range().
So that qgroup data reserved space is all bound to btrfs_ordered_extent
and solve the timing mismatch.
Fixes: f695fdcef83a ("btrfs: qgroup: Introduce functions to release/free qgroup reserve data space")
Suggested-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The incoming qgroup reserved space timing will move the data reservation
to ordered extent completely.
However in btrfs_punch_hole_lock_range() will call
btrfs_invalidate_page(), which will clear QGROUP_RESERVED bit for the
range.
In current stage it's OK, but if we're making ordered extents handle the
reserved space, then btrfs_punch_hole_lock_range() can clear the
QGROUP_RESERVED bit before we submit ordered extent, leading to qgroup
reserved space leakage.
So here change the timing to make reserve data space after
btrfs_punch_hole_lock_range().
The new timing is fine for either current code or the new code.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This is to prepare for the incoming timing change of qgroup reserved
data space and ordered extent.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Function insert_reserved_file_extent() takes a long list of parameters,
which are all for btrfs_file_extent_item, even including two reserved
members, encryption and other_encoding.
This makes the parameter list unnecessary long for a function which only
gets called twice.
This patch will refactor the parameter list, by using
btrfs_file_extent_item as parameter directly to hugely reduce the number
of parameters.
Also, since there are only two callers, one in btrfs_finish_ordered_io()
which inserts file extent for ordered extent, and one
__btrfs_prealloc_file_range().
These two call sites have completely different context, where ordered
extent can be compressed, but will always be regular extent, while the
preallocated one is never going to be compressed and always has PREALLOC
type.
So use two small wrapper for these two different call sites to improve
readability.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Add proper variable for the scrub page and use it instead of repeatedly
dereferencing the other structures.
Signed-off-by: David Sterba <dsterba@suse.com>
Use a simpler iteration over tree block pages, same what csum_tree_block
does: first page always exists, loop over the rest.
Signed-off-by: David Sterba <dsterba@suse.com>
Add proper variable for the scrub page and use it instead of repeatedly
dereferencing the other structures.
Signed-off-by: David Sterba <dsterba@suse.com>
Add proper variable for the scrub page and use it instead of repeatedly
dereferencing the other structures.
Signed-off-by: David Sterba <dsterba@suse.com>
The page contents with the checksum is available during the entire
function so we don't need to make a copy.
Signed-off-by: David Sterba <dsterba@suse.com>
BTRFS_SUPER_INFO_SIZE is 4096, and fits to a page on all supported
architectures, so we can calculate the checksum in one go.
Signed-off-by: David Sterba <dsterba@suse.com>
As the page mapping has been removed, rename the variables to 'kaddr'
that we use everywhere else. The type is changed to 'char *' so pointer
arithmetic works without casts.
Signed-off-by: David Sterba <dsterba@suse.com>
All pages that scrub uses in the scrub_block::pagev array are allocated
with GFP_KERNEL and never part of any mapping, so kmap is not necessary,
we only need to know the page address.
In scrub_write_page_to_dev_replace we don't even need to call
flush_dcache_page because of the same reason as above.
Signed-off-by: David Sterba <dsterba@suse.com>
This patch introduces a new "rescue=" mount option group for all mount
options for data recovery.
Different rescue sub options are seperated by ':'. E.g
"ro,rescue=nologreplay:usebackuproot".
The original plan was to use ';', but ';' needs to be escaped/quoted,
or it will be interpreted by bash, similar to '|'.
And obviously, user can specify rescue options one by one like:
"ro,rescue=nologreplay,rescue=usebackuproot".
The following mount options are converted to "rescue=", old mount
options are deprecated but still available for compatibility purpose:
- usebackuproot
Now it's "rescue=usebackuproot"
- nologreplay
Now it's "rescue=nologreplay"
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We currently use btrfs_check_data_free_space() when allocating space for
relocating data extents, but that is not necessary because that function
combines btrfs_alloc_data_chunk_ondemand(), which does the actual space
reservation, and btrfs_qgroup_reserve_data().
We can use btrfs_alloc_data_chunk_ondemand() directly because we know we
do not need to reserve qgroup space since we are dealing with a relocation
tree, which can never have qgroups (btrfs_qgroup_reserve_data() does
nothing as is_fstree() returns false for a relocation tree).
Conversely we can use btrfs_free_reserved_data_space_noquota() directly
instead of btrfs_free_reserved_data_space(), since we had no qgroup
reservation when allocating space.
This change is preparatory work for another patch in this series that
makes relocation reserve the exact amount of space it needs to relocate
a data block group. The function btrfs_check_data_free_space() has
the incovenient of requiring a start offset argument and we will want to
be able to allocate space for multiple ranges, which are not consecutive,
at once.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The start argument for btrfs_free_reserved_data_space_noquota() is only
used to make sure the amount of bytes we decrement from the bytes_may_use
counter of the data space_info object is aligned to the filesystem's
sector size. It serves no other purpose.
All its current callers always pass a length argument that is already
aligned to the sector size, so we can make the start argument go away.
In fact its presence makes it impossible to use it in a context where we
just want to free a number of bytes for a range for which either we do
not know its start offset or for freeing multiple ranges at once (which
are not contiguous).
This change is preparatory work for a patch (third patch in this series)
that makes relocation of data block groups that are not full reserve less
data space.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
As there is a dump_stack() done on memory allocation failures, these
messages might as well be deleted instead.
Signed-off-by: Liao Pingfang <liao.pingfang@zte.com.cn>
Reviewed-by: David Sterba <dsterba@suse.com>
[ minor tweaks ]
Signed-off-by: David Sterba <dsterba@suse.com>
Use the helper function where it is open coded to increment the
block_group reference count As btrfs_get_block_group() is a one-liner we
could have open-coded it, but its partner function
btrfs_put_block_group() isn't one-liner which does the free part in it.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
__btrfs_return_cluster_to_free_space() returns only 0. And all its
parent functions don't need the return value either so make this a void
function.
Further, as none of the callers of btrfs_return_cluster_to_free_space()
is actually using the return from this function, make this function also
return void.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Initially when the 'removed' flag was added to a block group to avoid
races between block group removal and fitrim, by commit 04216820fe83d5
("Btrfs: fix race between fs trimming and block group remove/allocation"),
we had to lock the chunks mutex because we could be moving the block
group from its current list, the pending chunks list, into the pinned
chunks list, or we could just be adding it to the pinned chunks if it was
not in the pending chunks list. Both lists were protected by the chunk
mutex.
However we no longer have those lists since commit 1c11b63eff2a67
("btrfs: replace pending/pinned chunks lists with io tree"), and locking
the chunk mutex is no longer necessary because of that. The same happens
at btrfs_unfreeze_block_group(), we lock the chunk mutex because the block
group's extent map could be part of the pinned chunks list and the call
to remove_extent_mapping() could be deleting it from that list, which
used to be protected by that mutex.
So just remove those lock and unlock calls as they are not needed anymore.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When find_first_block_group() finds a block group item in the extent-tree,
it does a lookup of the object in the extent mapping tree and does further
checks on the item.
Factor out this step from find_first_block_group() so we can further
simplify the code.
While we're at it, we can also just return early in
find_first_block_group(), if the tree slot isn't found.
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We already have an fs_info in our function parameters, there's no need
to do the maths again and get fs_info from the extent_root just to get
the mapping_tree.
Instead directly grab the mapping_tree from fs_info.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Adresses held in 'logical' array are always guaranteed to fall within
the boundaries of the block group. That is, 'start' can never be
smaller than cache->start. This invariant follows from the way the
address are calculated in btrfs_rmap_block:
stripe_nr = physical - map->stripes[i].physical;
stripe_nr = div64_u64(stripe_nr, map->stripe_len);
bytenr = chunk_start + stripe_nr * io_stripe_size;
I.e it's always some IO stripe within the given chunk.
Exploit this invariant to simplify the body of the loop by removing the
unnecessary 'if' since its 'else' part is the one always executed.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
extent_map::orig_block_len contains the size of a physical stripe when
it's used to describe block groups (calculated in read_one_chunk via
calc_stripe_length or calculated in decide_stripe_size and then assigned
to extent_map::orig_block_len in create_chunk). Exploit this fact to get
the size directly rather than opencoding the calculations. No functional
changes.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The call to btrfs_btree_balance_dirty has been there since the early
days of BTRFS, when the btree was directly modified from the write path,
hence dirtied btree inode pages. With the implementation of b888db2bd7b6
("Btrfs: Add delayed allocation to the extent based page tree code")
13 years ago the btree is no longer modified from the write path, hence
there is no point in calling this function. Just remove it.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This patch refactored target bpf_iter_init_seq_priv_t callback
function to accept additional information. This will be needed
in later patches for map element targets since a particular
map should be passed to traverse elements for that particular
map. In the future, other information may be passed to target
as well, e.g., pid, cgroup id, etc. to customize the iterator.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200723184110.590156-1-yhs@fb.com
The UDP reuseport conflict was a little bit tricky.
The net-next code, via bpf-next, extracted the reuseport handling
into a helper so that the BPF sk lookup code could invoke it.
At the same time, the logic for reuseport handling of unconnected
sockets changed via commit efc6b6f6c3113e8b203b9debfb72d81e0f3dcace
which changed the logic to carry on the reuseport result into the
rest of the lookup loop if we do not return immediately.
This requires moving the reuseport_has_conns() logic into the callers.
While we are here, get rid of inline directives as they do not belong
in foo.c files.
The other changes were cases of more straightforward overlapping
modifications.
Signed-off-by: David S. Miller <davem@davemloft.net>
- Fix the layering violation in the use of the EFI runtime services
availability mask in users of the 'efivars' abstraction
- Revert build fix for GCC v4.8 which is no longer supported
- Clean up some x86 EFI stub details, some of which are borderline bugs
that copy around garbage into padding fields - let's fix these
out of caution.
- Fix build issues while working on RISC-V support
- Avoid --whole-archive when linking the stub on arm64
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=n3nF
-----END PGP SIGNATURE-----
Merge tag 'efi-urgent-2020-07-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into master
Pull EFI fixes from Ingo Molnar:
"Various EFI fixes:
- Fix the layering violation in the use of the EFI runtime services
availability mask in users of the 'efivars' abstraction
- Revert build fix for GCC v4.8 which is no longer supported
- Clean up some x86 EFI stub details, some of which are borderline
bugs that copy around garbage into padding fields - let's fix these
out of caution.
- Fix build issues while working on RISC-V support
- Avoid --whole-archive when linking the stub on arm64"
* tag 'efi-urgent-2020-07-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
efi: Revert "efi/x86: Fix build with gcc 4"
efi/efivars: Expose RT service availability via efivars abstraction
efi/libstub: Move the function prototypes to header file
efi/libstub: Fix gcc error around __umoddi3 for 32 bit builds
efi/libstub/arm64: link stub lib.a conditionally
efi/x86: Only copy upto the end of setup_header
efi/x86: Remove unused variables
-----BEGIN PGP SIGNATURE-----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=Cvv4
-----END PGP SIGNATURE-----
Merge tag '5.8-rc6-cifs-fix' of git://git.samba.org/sfrench/cifs-2.6 into master
Pull cifs fix from Steve French:
"A fix for a recently discovered regression in rename to older servers
caused by a recent patch"
* tag '5.8-rc6-cifs-fix' of git://git.samba.org/sfrench/cifs-2.6:
Revert "cifs: Fix the target file was deleted when rename failed."
Linked requests are hashed, remove a comment stating otherwise. Also
move hash bits to emphasise that we don't carry it through loop
iteration and set it every time.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Whoever called io_prep_linked_timeout() should also do
io_queue_linked_timeout(). __io_queue_sqe() doesn't follow that for the
punting path leaving linked timeouts prepared but never queued.
Fixes: 6df1db6b54243 ("io_uring: fix mis-refcounting linked timeouts")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Remove REQ_F_WORK_INITIALIZED after io_req_clean_work(). That's a cold
path but is safer for those using io_req_clean_work() out of
*dismantle_req()/*io_free(). And for the same reason zero work.fs
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
/proc/fs/nfsd/client/../state at the wrong moment.
-----BEGIN PGP SIGNATURE-----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=lzOL
-----END PGP SIGNATURE-----
Merge tag 'nfsd-5.8-2' of git://linux-nfs.org/~bfields/linux into master
Pull nfsd fix from Bruce Fields:
"Just one fix for a NULL dereference if someone happens to read
/proc/fs/nfsd/client/../state at the wrong moment"
* tag 'nfsd-5.8-2' of git://linux-nfs.org/~bfields/linux:
nfsd4: fix NULL dereference in nfsd/clients display code
Merge misc fixes from Andrew Morton:
"Subsystems affected by this patch series: mm/pagemap, mm/shmem,
mm/hotfixes, mm/memcg, mm/hugetlb, mailmap, squashfs, scripts,
io-mapping, MAINTAINERS, and gdb"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
scripts/gdb: fix lx-symbols 'gdb.error' while loading modules
MAINTAINERS: add KCOV section
io-mapping: indicate mapping failure
scripts/decode_stacktrace: strip basepath from all paths
squashfs: fix length field overlap check in metadata reading
mailmap: add entry for Mike Rapoport
khugepaged: fix null-pointer dereference due to race
mm/hugetlb: avoid hardcoding while checking if cma is enabled
mm: memcg/slab: fix memory leak at non-root kmem_cache destroy
mm/memcg: fix refcount error while moving and swapping
mm/memcontrol: fix OOPS inside mem_cgroup_get_nr_swap_pages()
mm: initialize return of vm_insert_pages
vfs/xattr: mm/shmem: kernfs: release simple xattr entry in a right way
mm/mmap.c: close race between munmap() and expand_upwards()/downwards()
-----BEGIN PGP SIGNATURE-----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=51h/
-----END PGP SIGNATURE-----
Merge tag 'for-5.8-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux into master
Pull btrfs fixes from David Sterba:
"A few resouce leak fixes from recent patches, all are stable material.
The problems have been observed during testing or have a reproducer"
* tag 'for-5.8-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: fix mount failure caused by race with umount
btrfs: fix page leaks after failure to lock page for delalloc
btrfs: qgroup: fix data leak caused by race between writeback and truncate
btrfs: fix double free on ulist after backref resolution failure
Two fixes, the first one to remove compilation warnings and the second
to avoid potentially inefficient allocation of BIOs for direct writes
into sequential zones.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSRPv8tYSvhwAzJdzjdoc3SxdoYdgUCXxqPOwAKCRDdoc3SxdoY
dkUzAQCp8p1ijemK+t2pN35dz+J9TG2idX0iUkZA5dAUkwsZmQD+NT/U52WLTqCH
eKc72BZTfdMhTK/Sk6fnUtFzVXvGhgM=
=RERh
-----END PGP SIGNATURE-----
Merge tag 'zonefs-5.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs into master
Pull zonefs fixes from Damien Le Moal:
"Two fixes, the first one to remove compilation warnings and the second
to avoid potentially inefficient allocation of BIOs for direct writes
into sequential zones"
* tag 'zonefs-5.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs:
zonefs: count pages after truncating the iterator
zonefs: Fix compilation warning
-----BEGIN PGP SIGNATURE-----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=TBlP
-----END PGP SIGNATURE-----
Merge tag 'io_uring-5.8-2020-07-24' of git://git.kernel.dk/linux-block into master
Pull io_uring fixes from Jens Axboe:
- Fix discrepancy in how sqe->flags are treated for a few requests,
this makes it consistent (Daniele)
- Ensure that poll driven retry works with double waitqueue poll users
- Fix a missing io_req_init_async() (Pavel)
* tag 'io_uring-5.8-2020-07-24' of git://git.kernel.dk/linux-block:
io_uring: missed req_init_async() for IOSQE_ASYNC
io_uring: always allow drain/link/hardlink/async sqe flags
io_uring: ensure double poll additions work with both request types
This is a regression introduced by the "migrate from ll_rw_block usage
to BIO" patch.
Squashfs packs structures on byte boundaries, and due to that the length
field (of the metadata block) may not be fully in the current block.
The new code rewrote and introduced a faulty check for that edge case.
Fixes: 93e72b3c612adcaca1 ("squashfs: migrate from ll_rw_block usage to BIO")
Reported-by: Bernd Amend <bernd.amend@gmail.com>
Signed-off-by: Phillip Lougher <phillip@squashfs.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Adrien Schildknecht <adrien+dev@schischi.me>
Cc: Guenter Roeck <groeck@chromium.org>
Cc: Daniel Rosenberg <drosen@google.com>
Link: http://lkml.kernel.org/r/20200717195536.16069-1-phillip@squashfs.org.uk
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Move io_req_init_async() into io_grab_files(), it's safer this way. Note
that io_queue_async_work() does *init_async(), so it's valid to move out
of __io_queue_sqe() punt path. Also, add a helper around io_grab_files().
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Calling into opcode prep handlers may be dangerous, as they re-read
SQE but might not re-initialise requests completely. If io_req_defer()
passed fast checks and is done with preparations, punt it async.
As all other cases are covered with nulling @sqe, this guarantees that
io_[opcode]_prep() are visited only once per request.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In io_sq_thread(), if there are task works to handle, current codes
will skip schedule() and go on polling sq again, but forget to clear
IORING_SQ_NEED_WAKEUP flag, fix this issue. Also add two helpers to
set and clear IORING_SQ_NEED_WAKEUP flag,
Signed-off-by: Xiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
As every iopoll request have a task ref, it becomes expensive to put
them one by one, instead we can put several at once integrating that
into io_req_free_batch().
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Locked and pinned memory accounting in io_{,un}account_mem() depends on
having ->sqo_mm, which is NULL after a recent change for non SQPOLL'ed
io_ring. That disables the accounting.
Return ->sqo_mm initialisation back, and do __io_sq_thread_acquire_mm()
based on IORING_SETUP_SQPOLL flag.
Fixes: 8eb06d7e8dd85 ("io_uring: fix missing ->mm on exit")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
io_sqe_buffer_unregister() uses cxt->sqo_mm for memory accounting, but
io_ring_ctx_free() drops ->sqo_mm before leaving pinned_vm
over-accounted. Postpone mm cleanup for when it's not needed anymore.
Fixes: 309758254ea62 ("io_uring: report pinned memory usage")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Don't implement fast path of kbuf freeing and management inlined into
io_recv{,msg}(), that's error prone and duplicates handling. Replace it
with a helper io_put_recv_kbuf(), which mimics io_put_rw_kbuf() in the
io_read/write().
This also keeps cflags calculation in one place, removing duplication
between rw and recv/send.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Extract a common helper for cleaning up a selected buffer, this will be
used shortly. By the way, correct cflags types to unsigned and, as kbufs
are anyway tracked by a flag, remove useless zeroing req->rw.addr.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Move REQ_F_BUFFER_SELECT flag check out of io_recv_buffer_select(), and
do that in its call sites That saves us from double error checking and
possibly an extra function call.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
