mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git
synced 2025-01-08 15:04:45 +00:00
27021649ec
3303 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Yoann Congal
|
27021649ec |
printk: Remove redundant CONFIG_BASE_FULL
CONFIG_BASE_FULL is equivalent to !CONFIG_BASE_SMALL and is enabled by default: CONFIG_BASE_SMALL is the special case to take care of. So, remove CONFIG_BASE_FULL and move the config choice to CONFIG_BASE_SMALL (which defaults to 'n') For defconfigs explicitely disabling BASE_FULL, explicitely enable BASE_SMALL. For defconfigs explicitely enabling BASE_FULL, drop it as it is the default. Signed-off-by: Yoann Congal <yoann.congal@smile.fr> Reviewed-by: Petr Mladek <pmladek@suse.com> Link: https://lore.kernel.org/r/20240505080343.1471198-4-yoann.congal@smile.fr Signed-off-by: Petr Mladek <pmladek@suse.com> |
||
|
Linus Torvalds
|
9187210eee |
Networking changes for 6.9.
Core & protocols
----------------
- Large effort by Eric to lower rtnl_lock pressure and remove locks:
- Make commonly used parts of rtnetlink (address, route dumps etc.)
lockless, protected by RCU instead of rtnl_lock.
- Add a netns exit callback which already holds rtnl_lock,
allowing netns exit to take rtnl_lock once in the core
instead of once for each driver / callback.
- Remove locks / serialization in the socket diag interface.
- Remove 6 calls to synchronize_rcu() while holding rtnl_lock.
- Remove the dev_base_lock, depend on RCU where necessary.
- Support busy polling on a per-epoll context basis. Poll length
and budget parameters can be set independently of system defaults.
- Introduce struct net_hotdata, to make sure read-mostly global config
variables fit in as few cache lines as possible.
- Add optional per-nexthop statistics to ease monitoring / debug
of ECMP imbalance problems.
- Support TCP_NOTSENT_LOWAT in MPTCP.
- Ensure that IPv6 temporary addresses' preferred lifetimes are long
enough, compared to other configured lifetimes, and at least 2 sec.
- Support forwarding of ICMP Error messages in IPSec, per RFC 4301.
- Add support for the independent control state machine for bonding
per IEEE 802.1AX-2008 5.4.15 in addition to the existing coupled
control state machine.
- Add "network ID" to MCTP socket APIs to support hosts with multiple
disjoint MCTP networks.
- Re-use the mono_delivery_time skbuff bit for packets which user
space wants to be sent at a specified time. Maintain the timing
information while traversing veth links, bridge etc.
- Take advantage of MSG_SPLICE_PAGES for RxRPC DATA and ACK packets.
- Simplify many places iterating over netdevs by using an xarray
instead of a hash table walk (hash table remains in place, for
use on fastpaths).
- Speed up scanning for expired routes by keeping a dedicated list.
- Speed up "generic" XDP by trying harder to avoid large allocations.
- Support attaching arbitrary metadata to netconsole messages.
Things we sprinkled into general kernel code
--------------------------------------------
- Enforce VM_IOREMAP flag and range in ioremap_page_range and introduce
VM_SPARSE kind and vm_area_[un]map_pages (used by bpf_arena).
- Rework selftest harness to enable the use of the full range of
ksft exit code (pass, fail, skip, xfail, xpass).
Netfilter
---------
- Allow userspace to define a table that is exclusively owned by a daemon
(via netlink socket aliveness) without auto-removing this table when
the userspace program exits. Such table gets marked as orphaned and
a restarting management daemon can re-attach/regain ownership.
- Speed up element insertions to nftables' concatenated-ranges set type.
Compact a few related data structures.
BPF
---
- Add BPF token support for delegating a subset of BPF subsystem
functionality from privileged system-wide daemons such as systemd
through special mount options for userns-bound BPF fs to a trusted
& unprivileged application.
- Introduce bpf_arena which is sparse shared memory region between BPF
program and user space where structures inside the arena can have
pointers to other areas of the arena, and pointers work seamlessly
for both user-space programs and BPF programs.
- Introduce may_goto instruction that is a contract between the verifier
and the program. The verifier allows the program to loop assuming it's
behaving well, but reserves the right to terminate it.
- Extend the BPF verifier to enable static subprog calls in spin lock
critical sections.
- Support registration of struct_ops types from modules which helps
projects like fuse-bpf that seeks to implement a new struct_ops type.
- Add support for retrieval of cookies for perf/kprobe multi links.
- Support arbitrary TCP SYN cookie generation / validation in the TC
layer with BPF to allow creating SYN flood handling in BPF firewalls.
- Add code generation to inline the bpf_kptr_xchg() helper which
improves performance when stashing/popping the allocated BPF objects.
Wireless
--------
- Add SPP (signaling and payload protected) AMSDU support.
- Support wider bandwidth OFDMA, as required for EHT operation.
Driver API
----------
- Major overhaul of the Energy Efficient Ethernet internals to support
new link modes (2.5GE, 5GE), share more code between drivers
(especially those using phylib), and encourage more uniform behavior.
Convert and clean up drivers.
- Define an API for querying per netdev queue statistics from drivers.
- IPSec: account in global stats for fully offloaded sessions.
- Create a concept of Ethernet PHY Packages at the Device Tree level,
to allow parameterizing the existing PHY package code.
- Enable Rx hashing (RSS) on GTP protocol fields.
Misc
----
- Improvements and refactoring all over networking selftests.
- Create uniform module aliases for TC classifiers, actions,
and packet schedulers to simplify creating modprobe policies.
- Address all missing MODULE_DESCRIPTION() warnings in networking.
- Extend the Netlink descriptions in YAML to cover message encapsulation
or "Netlink polymorphism", where interpretation of nested attributes
depends on link type, classifier type or some other "class type".
Drivers
-------
- Ethernet high-speed NICs:
- Add a new driver for Marvell's Octeon PCI Endpoint NIC VF.
- Intel (100G, ice, idpf):
- support E825-C devices
- nVidia/Mellanox:
- support devices with one port and multiple PCIe links
- Broadcom (bnxt):
- support n-tuple filters
- support configuring the RSS key
- Wangxun (ngbe/txgbe):
- implement irq_domain for TXGBE's sub-interrupts
- Pensando/AMD:
- support XDP
- optimize queue submission and wakeup handling (+17% bps)
- optimize struct layout, saving 28% of memory on queues
- Ethernet NICs embedded and virtual:
- Google cloud vNIC:
- refactor driver to perform memory allocations for new queue
config before stopping and freeing the old queue memory
- Synopsys (stmmac):
- obey queueMaxSDU and implement counters required by 802.1Qbv
- Renesas (ravb):
- support packet checksum offload
- suspend to RAM and runtime PM support
- Ethernet switches:
- nVidia/Mellanox:
- support for nexthop group statistics
- Microchip:
- ksz8: implement PHY loopback
- add support for KSZ8567, a 7-port 10/100Mbps switch
- PTP:
- New driver for RENESAS FemtoClock3 Wireless clock generator.
- Support OCP PTP cards designed and built by Adva.
- CAN:
- Support recvmsg() flags for own, local and remote traffic
on CAN BCM sockets.
- Support for esd GmbH PCIe/402 CAN device family.
- m_can:
- Rx/Tx submission coalescing
- wake on frame Rx
- WiFi:
- Intel (iwlwifi):
- enable signaling and payload protected A-MSDUs
- support wider-bandwidth OFDMA
- support for new devices
- bump FW API to 89 for AX devices; 90 for BZ/SC devices
- MediaTek (mt76):
- mt7915: newer ADIE version support
- mt7925: radio temperature sensor support
- Qualcomm (ath11k):
- support 6 GHz station power modes: Low Power Indoor (LPI),
Standard Power) SP and Very Low Power (VLP)
- QCA6390 & WCN6855: support 2 concurrent station interfaces
- QCA2066 support
- Qualcomm (ath12k):
- refactoring in preparation for Multi-Link Operation (MLO) support
- 1024 Block Ack window size support
- firmware-2.bin support
- support having multiple identical PCI devices (firmware needs to
have ATH12K_FW_FEATURE_MULTI_QRTR_ID)
- QCN9274: support split-PHY devices
- WCN7850: enable Power Save Mode in station mode
- WCN7850: P2P support
- RealTek:
- rtw88: support for more rtw8811cu and rtw8821cu devices
- rtw89: support SCAN_RANDOM_SN and SET_SCAN_DWELL
- rtlwifi: speed up USB firmware initialization
- rtwl8xxxu:
- RTL8188F: concurrent interface support
- Channel Switch Announcement (CSA) support in AP mode
- Broadcom (brcmfmac):
- per-vendor feature support
- per-vendor SAE password setup
- DMI nvram filename quirk for ACEPC W5 Pro
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=oY52
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core & protocols:
- Large effort by Eric to lower rtnl_lock pressure and remove locks:
- Make commonly used parts of rtnetlink (address, route dumps
etc) lockless, protected by RCU instead of rtnl_lock.
- Add a netns exit callback which already holds rtnl_lock,
allowing netns exit to take rtnl_lock once in the core instead
of once for each driver / callback.
- Remove locks / serialization in the socket diag interface.
- Remove 6 calls to synchronize_rcu() while holding rtnl_lock.
- Remove the dev_base_lock, depend on RCU where necessary.
- Support busy polling on a per-epoll context basis. Poll length and
budget parameters can be set independently of system defaults.
- Introduce struct net_hotdata, to make sure read-mostly global
config variables fit in as few cache lines as possible.
- Add optional per-nexthop statistics to ease monitoring / debug of
ECMP imbalance problems.
- Support TCP_NOTSENT_LOWAT in MPTCP.
- Ensure that IPv6 temporary addresses' preferred lifetimes are long
enough, compared to other configured lifetimes, and at least 2 sec.
- Support forwarding of ICMP Error messages in IPSec, per RFC 4301.
- Add support for the independent control state machine for bonding
per IEEE 802.1AX-2008 5.4.15 in addition to the existing coupled
control state machine.
- Add "network ID" to MCTP socket APIs to support hosts with multiple
disjoint MCTP networks.
- Re-use the mono_delivery_time skbuff bit for packets which user
space wants to be sent at a specified time. Maintain the timing
information while traversing veth links, bridge etc.
- Take advantage of MSG_SPLICE_PAGES for RxRPC DATA and ACK packets.
- Simplify many places iterating over netdevs by using an xarray
instead of a hash table walk (hash table remains in place, for use
on fastpaths).
- Speed up scanning for expired routes by keeping a dedicated list.
- Speed up "generic" XDP by trying harder to avoid large allocations.
- Support attaching arbitrary metadata to netconsole messages.
Things we sprinkled into general kernel code:
- Enforce VM_IOREMAP flag and range in ioremap_page_range and
introduce VM_SPARSE kind and vm_area_[un]map_pages (used by
bpf_arena).
- Rework selftest harness to enable the use of the full range of ksft
exit code (pass, fail, skip, xfail, xpass).
Netfilter:
- Allow userspace to define a table that is exclusively owned by a
daemon (via netlink socket aliveness) without auto-removing this
table when the userspace program exits. Such table gets marked as
orphaned and a restarting management daemon can re-attach/regain
ownership.
- Speed up element insertions to nftables' concatenated-ranges set
type. Compact a few related data structures.
BPF:
- Add BPF token support for delegating a subset of BPF subsystem
functionality from privileged system-wide daemons such as systemd
through special mount options for userns-bound BPF fs to a trusted
& unprivileged application.
- Introduce bpf_arena which is sparse shared memory region between
BPF program and user space where structures inside the arena can
have pointers to other areas of the arena, and pointers work
seamlessly for both user-space programs and BPF programs.
- Introduce may_goto instruction that is a contract between the
verifier and the program. The verifier allows the program to loop
assuming it's behaving well, but reserves the right to terminate
it.
- Extend the BPF verifier to enable static subprog calls in spin lock
critical sections.
- Support registration of struct_ops types from modules which helps
projects like fuse-bpf that seeks to implement a new struct_ops
type.
- Add support for retrieval of cookies for perf/kprobe multi links.
- Support arbitrary TCP SYN cookie generation / validation in the TC
layer with BPF to allow creating SYN flood handling in BPF
firewalls.
- Add code generation to inline the bpf_kptr_xchg() helper which
improves performance when stashing/popping the allocated BPF
objects.
Wireless:
- Add SPP (signaling and payload protected) AMSDU support.
- Support wider bandwidth OFDMA, as required for EHT operation.
Driver API:
- Major overhaul of the Energy Efficient Ethernet internals to
support new link modes (2.5GE, 5GE), share more code between
drivers (especially those using phylib), and encourage more
uniform behavior. Convert and clean up drivers.
- Define an API for querying per netdev queue statistics from
drivers.
- IPSec: account in global stats for fully offloaded sessions.
- Create a concept of Ethernet PHY Packages at the Device Tree level,
to allow parameterizing the existing PHY package code.
- Enable Rx hashing (RSS) on GTP protocol fields.
Misc:
- Improvements and refactoring all over networking selftests.
- Create uniform module aliases for TC classifiers, actions, and
packet schedulers to simplify creating modprobe policies.
- Address all missing MODULE_DESCRIPTION() warnings in networking.
- Extend the Netlink descriptions in YAML to cover message
encapsulation or "Netlink polymorphism", where interpretation of
nested attributes depends on link type, classifier type or some
other "class type".
Drivers:
- Ethernet high-speed NICs:
- Add a new driver for Marvell's Octeon PCI Endpoint NIC VF.
- Intel (100G, ice, idpf):
- support E825-C devices
- nVidia/Mellanox:
- support devices with one port and multiple PCIe links
- Broadcom (bnxt):
- support n-tuple filters
- support configuring the RSS key
- Wangxun (ngbe/txgbe):
- implement irq_domain for TXGBE's sub-interrupts
- Pensando/AMD:
- support XDP
- optimize queue submission and wakeup handling (+17% bps)
- optimize struct layout, saving 28% of memory on queues
- Ethernet NICs embedded and virtual:
- Google cloud vNIC:
- refactor driver to perform memory allocations for new queue
config before stopping and freeing the old queue memory
- Synopsys (stmmac):
- obey queueMaxSDU and implement counters required by 802.1Qbv
- Renesas (ravb):
- support packet checksum offload
- suspend to RAM and runtime PM support
- Ethernet switches:
- nVidia/Mellanox:
- support for nexthop group statistics
- Microchip:
- ksz8: implement PHY loopback
- add support for KSZ8567, a 7-port 10/100Mbps switch
- PTP:
- New driver for RENESAS FemtoClock3 Wireless clock generator.
- Support OCP PTP cards designed and built by Adva.
- CAN:
- Support recvmsg() flags for own, local and remote traffic on CAN
BCM sockets.
- Support for esd GmbH PCIe/402 CAN device family.
- m_can:
- Rx/Tx submission coalescing
- wake on frame Rx
- WiFi:
- Intel (iwlwifi):
- enable signaling and payload protected A-MSDUs
- support wider-bandwidth OFDMA
- support for new devices
- bump FW API to 89 for AX devices; 90 for BZ/SC devices
- MediaTek (mt76):
- mt7915: newer ADIE version support
- mt7925: radio temperature sensor support
- Qualcomm (ath11k):
- support 6 GHz station power modes: Low Power Indoor (LPI),
Standard Power) SP and Very Low Power (VLP)
- QCA6390 & WCN6855: support 2 concurrent station interfaces
- QCA2066 support
- Qualcomm (ath12k):
- refactoring in preparation for Multi-Link Operation (MLO)
support
- 1024 Block Ack window size support
- firmware-2.bin support
- support having multiple identical PCI devices (firmware needs
to have ATH12K_FW_FEATURE_MULTI_QRTR_ID)
- QCN9274: support split-PHY devices
- WCN7850: enable Power Save Mode in station mode
- WCN7850: P2P support
- RealTek:
- rtw88: support for more rtw8811cu and rtw8821cu devices
- rtw89: support SCAN_RANDOM_SN and SET_SCAN_DWELL
- rtlwifi: speed up USB firmware initialization
- rtwl8xxxu:
- RTL8188F: concurrent interface support
- Channel Switch Announcement (CSA) support in AP mode
- Broadcom (brcmfmac):
- per-vendor feature support
- per-vendor SAE password setup
- DMI nvram filename quirk for ACEPC W5 Pro"
* tag 'net-next-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2255 commits)
nexthop: Fix splat with CONFIG_DEBUG_PREEMPT=y
nexthop: Fix out-of-bounds access during attribute validation
nexthop: Only parse NHA_OP_FLAGS for dump messages that require it
nexthop: Only parse NHA_OP_FLAGS for get messages that require it
bpf: move sleepable flag from bpf_prog_aux to bpf_prog
bpf: hardcode BPF_PROG_PACK_SIZE to 2MB * num_possible_nodes()
selftests/bpf: Add kprobe multi triggering benchmarks
ptp: Move from simple ida to xarray
vxlan: Remove generic .ndo_get_stats64
vxlan: Do not alloc tstats manually
devlink: Add comments to use netlink gen tool
nfp: flower: handle acti_netdevs allocation failure
net/packet: Add getsockopt support for PACKET_COPY_THRESH
net/netlink: Add getsockopt support for NETLINK_LISTEN_ALL_NSID
selftests/bpf: Add bpf_arena_htab test.
selftests/bpf: Add bpf_arena_list test.
selftests/bpf: Add unit tests for bpf_arena_alloc/free_pages
bpf: Add helper macro bpf_addr_space_cast()
libbpf: Recognize __arena global variables.
bpftool: Recognize arena map type
...
|
||
|
Linus Torvalds
|
216532e147 |
hardening updates for v6.9-rc1
- string.h and related header cleanups (Tanzir Hasan, Andy Shevchenko)
- VMCI memcpy() usage and struct_size() cleanups (Vasiliy Kovalev, Harshit
Mogalapalli)
- selftests/powerpc: Fix load_unaligned_zeropad build failure (Michael
Ellerman)
- hardened Kconfig fragment updates (Marco Elver, Lukas Bulwahn)
- Handle tail call optimization better in LKDTM (Douglas Anderson)
- Use long form types in overflow.h (Andy Shevchenko)
- Add flags param to string_get_size() (Andy Shevchenko)
- Add Coccinelle script for potential struct_size() use (Jacob Keller)
- Fix objtool corner case under KCFI (Josh Poimboeuf)
- Drop 13 year old backward compat CAP_SYS_ADMIN check (Jingzi Meng)
- Add str_plural() helper (Michal Wajdeczko, Kees Cook)
- Ignore relocations in .notes section
- Add comments to explain how __is_constexpr() works
- Fix m68k stack alignment expectations in stackinit Kunit test
- Convert string selftests to KUnit
- Add KUnit tests for fortified string functions
- Improve reporting during fortified string warnings
- Allow non-type arg to type_max() and type_min()
- Allow strscpy() to be called with only 2 arguments
- Add binary mode to leaking_addresses scanner
- Various small cleanups to leaking_addresses scanner
- Adding wrapping_*() arithmetic helper
- Annotate initial signed integer wrap-around in refcount_t
- Add explicit UBSAN section to MAINTAINERS
- Fix UBSAN self-test warnings
- Simplify UBSAN build via removal of CONFIG_UBSAN_SANITIZE_ALL
- Reintroduce UBSAN's signed overflow sanitizer
-----BEGIN PGP SIGNATURE-----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=OP+o
-----END PGP SIGNATURE-----
Merge tag 'hardening-v6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening updates from Kees Cook:
"As is pretty normal for this tree, there are changes all over the
place, especially for small fixes, selftest improvements, and improved
macro usability.
Some header changes ended up landing via this tree as they depended on
the string header cleanups. Also, a notable set of changes is the work
for the reintroduction of the UBSAN signed integer overflow sanitizer
so that we can continue to make improvements on the compiler side to
make this sanitizer a more viable future security hardening option.
Summary:
- string.h and related header cleanups (Tanzir Hasan, Andy
Shevchenko)
- VMCI memcpy() usage and struct_size() cleanups (Vasiliy Kovalev,
Harshit Mogalapalli)
- selftests/powerpc: Fix load_unaligned_zeropad build failure
(Michael Ellerman)
- hardened Kconfig fragment updates (Marco Elver, Lukas Bulwahn)
- Handle tail call optimization better in LKDTM (Douglas Anderson)
- Use long form types in overflow.h (Andy Shevchenko)
- Add flags param to string_get_size() (Andy Shevchenko)
- Add Coccinelle script for potential struct_size() use (Jacob
Keller)
- Fix objtool corner case under KCFI (Josh Poimboeuf)
- Drop 13 year old backward compat CAP_SYS_ADMIN check (Jingzi Meng)
- Add str_plural() helper (Michal Wajdeczko, Kees Cook)
- Ignore relocations in .notes section
- Add comments to explain how __is_constexpr() works
- Fix m68k stack alignment expectations in stackinit Kunit test
- Convert string selftests to KUnit
- Add KUnit tests for fortified string functions
- Improve reporting during fortified string warnings
- Allow non-type arg to type_max() and type_min()
- Allow strscpy() to be called with only 2 arguments
- Add binary mode to leaking_addresses scanner
- Various small cleanups to leaking_addresses scanner
- Adding wrapping_*() arithmetic helper
- Annotate initial signed integer wrap-around in refcount_t
- Add explicit UBSAN section to MAINTAINERS
- Fix UBSAN self-test warnings
- Simplify UBSAN build via removal of CONFIG_UBSAN_SANITIZE_ALL
- Reintroduce UBSAN's signed overflow sanitizer"
* tag 'hardening-v6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (51 commits)
selftests/powerpc: Fix load_unaligned_zeropad build failure
string: Convert helpers selftest to KUnit
string: Convert selftest to KUnit
sh: Fix build with CONFIG_UBSAN=y
compiler.h: Explain how __is_constexpr() works
overflow: Allow non-type arg to type_max() and type_min()
VMCI: Fix possible memcpy() run-time warning in vmci_datagram_invoke_guest_handler()
lib/string_helpers: Add flags param to string_get_size()
x86, relocs: Ignore relocations in .notes section
objtool: Fix UNWIND_HINT_{SAVE,RESTORE} across basic blocks
overflow: Use POD in check_shl_overflow()
lib: stackinit: Adjust target string to 8 bytes for m68k
sparc: vdso: Disable UBSAN instrumentation
kernel.h: Move lib/cmdline.c prototypes to string.h
leaking_addresses: Provide mechanism to scan binary files
leaking_addresses: Ignore input device status lines
leaking_addresses: Use File::Temp for /tmp files
MAINTAINERS: Update LEAKING_ADDRESSES details
fortify: Improve buffer overflow reporting
fortify: Add KUnit tests for runtime overflows
...
|
||
|
Linus Torvalds
|
65d287c7eb |
asm-generic updates for 6.9
Just two small updates this time:
- A series I did to unify the definition of PAGE_SIZE through Kconfig,
intended to help with a vdso rework that needs the constant but
cannot include the normal kernel headers when building the compat
VDSO on arm64 and potentially others.
- a patch from Yan Zhao to remove the pfn_to_virt() definitions from
a couple of architectures after finding they were both incorrect
and entirely unused.
-----BEGIN PGP SIGNATURE-----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=X4Cs
-----END PGP SIGNATURE-----
Merge tag 'asm-generic-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull asm-generic updates from Arnd Bergmann:
"Just two small updates this time:
- A series I did to unify the definition of PAGE_SIZE through
Kconfig, intended to help with a vdso rework that needs the
constant but cannot include the normal kernel headers when building
the compat VDSO on arm64 and potentially others
- a patch from Yan Zhao to remove the pfn_to_virt() definitions from
a couple of architectures after finding they were both incorrect
and entirely unused"
* tag 'asm-generic-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
arch: define CONFIG_PAGE_SIZE_*KB on all architectures
arch: simplify architecture specific page size configuration
arch: consolidate existing CONFIG_PAGE_SIZE_*KB definitions
mm: Remove broken pfn_to_virt() on arch csky/hexagon/openrisc
|
||
|
Linus Torvalds
|
306bee64b7 |
SoC: device tree updates for 6.9
There is very little going on with new SoC support this time, all the
new chips are variations of others that we already support, and they
are all based on ARMv8 cores:
- Mediatek MT7981B (Filogic 820) and MT7988A (Filogic 880) are
networking SoCs designed to be used in wireless routers, similar
to the already supported MT7986A (Filogic 830).
- NXP i.MX8DXP is a variant of i.MX8QXP, with two CPU cores less.
These are used in many embedded and industrial applications.
- Renesas R8A779G2 (R-Car V4H ES2.0) and R8A779H0 (R-Car V4M)
are automotive SoCs.
- TI J722S is another automotive variant of its K3 family,
related to the AM62 series.
There are a total of 7 new arm32 machines and 45 arm64 ones, including
- Two Android phones based on the old Tegra30 chip
- Two machines using Cortex-A53 SoCs from Allwinner, a mini PC and
a SoM development board
- A set-top box using Amlogic Meson G12A S905X2
- Eight embedded board using NXP i.MX6/8/9
- Three machines using Mediatek network router chips
- Ten Chromebooks, all based on Mediatek MT8186
- One development board based on Mediatek MT8395 (Genio 1200)
- Seven tablets and phones based on Qualcomm SoCs, most of them
from Samsung.
- A third development board for Qualcomm SM8550 (Snapdragon 8 Gen 2)
- Three variants of the "White Hawk" board for Renesas
automotive SoCs
- Ten Rockchips RK35xx based machines, including NAS, Tablet,
Game console and industrial form factors.
- Three evaluation boards for TI K3 based SoCs
The other changes are mainly the usual feature additions for existing hardware,
cleanups, and dtc compile time fixes. One notable change is the inclusion
of PowerVR SGX GPU nodes on TI SoCs.
-----BEGIN PGP SIGNATURE-----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=krkR
-----END PGP SIGNATURE-----
Merge tag 'soc-dt-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC device tree updates from Arnd Bergmann:
"There is very little going on with new SoC support this time, all the
new chips are variations of others that we already support, and they
are all based on ARMv8 cores:
- Mediatek MT7981B (Filogic 820) and MT7988A (Filogic 880) are
networking SoCs designed to be used in wireless routers, similar to
the already supported MT7986A (Filogic 830).
- NXP i.MX8DXP is a variant of i.MX8QXP, with two CPU cores less.
These are used in many embedded and industrial applications.
- Renesas R8A779G2 (R-Car V4H ES2.0) and R8A779H0 (R-Car V4M) are
automotive SoCs.
- TI J722S is another automotive variant of its K3 family, related to
the AM62 series.
There are a total of 7 new arm32 machines and 45 arm64 ones, including
- Two Android phones based on the old Tegra30 chip
- Two machines using Cortex-A53 SoCs from Allwinner, a mini PC and a
SoM development board
- A set-top box using Amlogic Meson G12A S905X2
- Eight embedded board using NXP i.MX6/8/9
- Three machines using Mediatek network router chips
- Ten Chromebooks, all based on Mediatek MT8186
- One development board based on Mediatek MT8395 (Genio 1200)
- Seven tablets and phones based on Qualcomm SoCs, most of them from
Samsung.
- A third development board for Qualcomm SM8550 (Snapdragon 8 Gen 2)
- Three variants of the "White Hawk" board for Renesas automotive
SoCs
- Ten Rockchips RK35xx based machines, including NAS, Tablet, Game
console and industrial form factors.
- Three evaluation boards for TI K3 based SoCs
The other changes are mainly the usual feature additions for existing
hardware, cleanups, and dtc compile time fixes. One notable change is
the inclusion of PowerVR SGX GPU nodes on TI SoCs"
* tag 'soc-dt-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (824 commits)
riscv: dts: Move BUILTIN_DTB_SOURCE to common Kconfig
riscv: dts: starfive: jh7100: fix root clock names
ARM: dts: samsung: exynos4412: decrease memory to account for unusable region
arm64: dts: qcom: sm8250-xiaomi-elish: set rotation
arm64: dts: qcom: sm8650: Fix SPMI channels size
arm64: dts: qcom: sm8550: Fix SPMI channels size
arm64: dts: rockchip: Fix name for UART pin header on qnap-ts433
arm: dts: marvell: clearfog-gtr-l8: align port numbers with enclosure
arm: dts: marvell: clearfog-gtr-l8: add support for second sfp connector
dt-bindings: soc: renesas: renesas-soc: Add pattern for gray-hawk
dtc: Enable dtc interrupt_provider check
arm64: dts: st: add video encoder support to stm32mp255
arm64: dts: st: add video decoder support to stm32mp255
ARM: dts: stm32: enable crypto accelerator on stm32mp135f-dk
ARM: dts: stm32: enable CRC on stm32mp135f-dk
ARM: dts: stm32: add CRC on stm32mp131
ARM: dts: add stm32f769-disco-mb1166-reva09
ARM: dts: stm32: add display support on stm32f769-disco
ARM: dts: stm32: rename mmc_vcard to vcc-3v3 on stm32f769-disco
ARM: dts: stm32: add DSI support on stm32f769
...
|
||
|
Linus Torvalds
|
fcc196579a |
Misc cleanups, including a large series from Thomas Gleixner to
cure Sparse warnings. Signed-off-by: Ingo Molnar <mingo@kernel.org> -----BEGIN PGP SIGNATURE----- iQJFBAABCgAvFiEEBpT5eoXrXCwVQwEKEnMQ0APhK1gFAmXvAFQRHG1pbmdvQGtl cm5lbC5vcmcACgkQEnMQ0APhK1hkDRAAwASVCQ88kiGqNQtHibXlK54mAFGsc0xv T8OPds15DUzoLg/y8lw0X0DHly6MdGXVmygybejNIw2BN4lhLjQ7f4Ria7rv7LDy FcI1jfvysEMyYRFHGRefb/GBFzuEfKoROwf+QylGmKz0ZK674gNMngsI9pwOBdbe wElq3IkHoNuTUfH9QA4BvqGam1n122nvVTop3g0PMHWzx9ky8hd/BEUjXFZhfINL zZk3fwUbER2QYbhHt+BN2GRbdf2BrKvqTkXpKxyXTdnpiqAo0CzBGKerZ62H82qG n737Nib1lrsfM5yDHySnau02aamRXaGvCJUd6gpac1ZmNpZMWhEOT/0Tr/Nj5ztF lUAvKqMZn/CwwQky1/XxD0LHegnve0G+syqQt/7x7o1ELdiwTzOWMCx016UeodzB yyHf3Xx9J8nt3snlrlZBaGEfegg9ePLu5Vir7iXjg3vrloUW8A+GZM62NVxF4HVV QWF80BfWf8zbLQ/OS1382t1shaioIe5pEXzIjcnyVIZCiiP2/5kP2O6P4XVbwVlo Ca5eEt8U1rtsLUZaCzI2ZRTQf/8SLMQWyaV+ZmkVwcVdFoARC31EgdE5wYYoZOf6 7Vl+rXd+rZCuTWk0ZgznCZEm75aaqukaQCBa2V8hIVociLFVzhg/Tjedv7s0CspA hNfxdN1LDZc= =0eJ7 -----END PGP SIGNATURE----- Merge tag 'x86-cleanups-2024-03-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 cleanups from Ingo Molnar: "Misc cleanups, including a large series from Thomas Gleixner to cure sparse warnings" * tag 'x86-cleanups-2024-03-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/nmi: Drop unused declaration of proc_nmi_enabled() x86/callthunks: Use EXPORT_PER_CPU_SYMBOL_GPL() for per CPU variables x86/cpu: Provide a declaration for itlb_multihit_kvm_mitigation x86/cpu: Use EXPORT_PER_CPU_SYMBOL_GPL() for x86_spec_ctrl_current x86/uaccess: Add missing __force to casts in __access_ok() and valid_user_address() x86/percpu: Cure per CPU madness on UP smp: Consolidate smp_prepare_boot_cpu() x86/msr: Add missing __percpu annotations x86/msr: Prepare for including <linux/percpu.h> into <asm/msr.h> perf/x86/amd/uncore: Fix __percpu annotation x86/nmi: Remove an unnecessary IS_ENABLED(CONFIG_SMP) x86/apm_32: Remove dead function apm_get_battery_status() x86/insn-eval: Fix function param name in get_eff_addr_sib() |
||
|
Jakub Kicinski
|
5f20e6ab1f |
for-netdev
-----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEE+soXsSLHKoYyzcli6rmadz2vbToFAmXvm7IACgkQ6rmadz2v bTqdMA//VMHNHVLb4oROoXyQD9fw2mCmIUEKzP88RXfqcxsfEX7HF+k8B5ZTk0ro CHXTAnc79+Qqg0j24bkQKxup/fKBQVw9D+Ia4b3ytlm1I2MtyU/16xNEzVhAPU2D iKk6mVBsEdCbt/GjpWORy/VVnZlZpC7BOpZLxsbbxgXOndnCegyjXzSnLGJGxdvi zkrQTn2SrFzLi6aNpVLqrv6Nks6HJusfCKsIrtlbkQ85dulasHOtwK9s6GF60nte aaho+MPx3L+lWEgapsm8rR779pHaYIB/GbZUgEPxE/xUJ/V8BzDgFNLMzEiIBRMN a0zZam11BkBzCfcO9gkvDRByaei/dZz2jdqfU4GlHklFj1WFfz8Q7fRLEPINksvj WXLgJADGY5mtGbjG21FScThxzj+Ruqwx0a13ddlyI/W+P3y5yzSWsLwJG5F9p0oU 6nlkJ4U8yg+9E1ie5ae0TibqvRJzXPjfOERZGwYDSVvfQGzv1z+DGSOPMmgNcWYM dIaO+A/+NS3zdbk8+1PP2SBbhHPk6kWyCUByWc7wMzCPTiwriFGY/DD2sN+Fsufo zorzfikUQOlTfzzD5jbmT49U8hUQUf6QIWsu7BijSiHaaC7am4S8QB2O6ibJMqdv yNiwvuX+ThgVIY3QKrLLqL0KPGeKMR5mtfq6rrwSpfp/b4g27FE= =eFgA -----END PGP SIGNATURE----- Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next Alexei Starovoitov says: ==================== pull-request: bpf-next 2024-03-11 We've added 59 non-merge commits during the last 9 day(s) which contain a total of 88 files changed, 4181 insertions(+), 590 deletions(-). The main changes are: 1) Enforce VM_IOREMAP flag and range in ioremap_page_range and introduce VM_SPARSE kind and vm_area_[un]map_pages to be used in bpf_arena, from Alexei. 2) Introduce bpf_arena which is sparse shared memory region between bpf program and user space where structures inside the arena can have pointers to other areas of the arena, and pointers work seamlessly for both user-space programs and bpf programs, from Alexei and Andrii. 3) Introduce may_goto instruction that is a contract between the verifier and the program. The verifier allows the program to loop assuming it's behaving well, but reserves the right to terminate it, from Alexei. 4) Use IETF format for field definitions in the BPF standard document, from Dave. 5) Extend struct_ops libbpf APIs to allow specify version suffixes for stuct_ops map types, share the same BPF program between several map definitions, and other improvements, from Eduard. 6) Enable struct_ops support for more than one page in trampolines, from Kui-Feng. 7) Support kCFI + BPF on riscv64, from Puranjay. 8) Use bpf_prog_pack for arm64 bpf trampoline, from Puranjay. 9) Fix roundup_pow_of_two undefined behavior on 32-bit archs, from Toke. ==================== Link: https://lore.kernel.org/r/20240312003646.8692-1-alexei.starovoitov@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Linus Torvalds
|
d08c407f71 |
A large set of updates and features for timers and timekeeping:
- The hierarchical timer pull model
When timer wheel timers are armed they are placed into the timer wheel
of a CPU which is likely to be busy at the time of expiry. This is done
to avoid wakeups on potentially idle CPUs.
This is wrong in several aspects:
1) The heuristics to select the target CPU are wrong by
definition as the chance to get the prediction right is close
to zero.
2) Due to #1 it is possible that timers are accumulated on a
single target CPU
3) The required computation in the enqueue path is just overhead for
dubious value especially under the consideration that the vast
majority of timer wheel timers are either canceled or rearmed
before they expire.
The timer pull model avoids the above by removing the target
computation on enqueue and queueing timers always on the CPU on which
they get armed.
This is achieved by having separate wheels for CPU pinned timers and
global timers which do not care about where they expire.
As long as a CPU is busy it handles both the pinned and the global
timers which are queued on the CPU local timer wheels.
When a CPU goes idle it evaluates its own timer wheels:
- If the first expiring timer is a pinned timer, then the global
timers can be ignored as the CPU will wake up before they expire.
- If the first expiring timer is a global timer, then the expiry time
is propagated into the timer pull hierarchy and the CPU makes sure
to wake up for the first pinned timer.
The timer pull hierarchy organizes CPUs in groups of eight at the
lowest level and at the next levels groups of eight groups up to the
point where no further aggregation of groups is required, i.e. the
number of levels is log8(NR_CPUS). The magic number of eight has been
established by experimention, but can be adjusted if needed.
In each group one busy CPU acts as the migrator. It's only one CPU to
avoid lock contention on remote timer wheels.
The migrator CPU checks in its own timer wheel handling whether there
are other CPUs in the group which have gone idle and have global timers
to expire. If there are global timers to expire, the migrator locks the
remote CPU timer wheel and handles the expiry.
Depending on the group level in the hierarchy this handling can require
to walk the hierarchy downwards to the CPU level.
Special care is taken when the last CPU goes idle. At this point the
CPU is the systemwide migrator at the top of the hierarchy and it
therefore cannot delegate to the hierarchy. It needs to arm its own
timer device to expire either at the first expiring timer in the
hierarchy or at the first CPU local timer, which ever expires first.
This completely removes the overhead from the enqueue path, which is
e.g. for networking a true hotpath and trades it for a slightly more
complex idle path.
This has been in development for a couple of years and the final series
has been extensively tested by various teams from silicon vendors and
ran through extensive CI.
There have been slight performance improvements observed on network
centric workloads and an Intel team confirmed that this allows them to
power down a die completely on a mult-die socket for the first time in
a mostly idle scenario.
There is only one outstanding ~1.5% regression on a specific overloaded
netperf test which is currently investigated, but the rest is either
positive or neutral performance wise and positive on the power
management side.
- Fixes for the timekeeping interpolation code for cross-timestamps:
cross-timestamps are used for PTP to get snapshots from hardware timers
and interpolated them back to clock MONOTONIC. The changes address a
few corner cases in the interpolation code which got the math and logic
wrong.
- Simplifcation of the clocksource watchdog retry logic to automatically
adjust to handle larger systems correctly instead of having more
incomprehensible command line parameters.
- Treewide consolidation of the VDSO data structures.
- The usual small improvements and cleanups all over the place.
-----BEGIN PGP SIGNATURE-----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=iQlu
-----END PGP SIGNATURE-----
Merge tag 'timers-core-2024-03-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer updates from Thomas Gleixner:
"A large set of updates and features for timers and timekeeping:
- The hierarchical timer pull model
When timer wheel timers are armed they are placed into the timer
wheel of a CPU which is likely to be busy at the time of expiry.
This is done to avoid wakeups on potentially idle CPUs.
This is wrong in several aspects:
1) The heuristics to select the target CPU are wrong by
definition as the chance to get the prediction right is
close to zero.
2) Due to #1 it is possible that timers are accumulated on
a single target CPU
3) The required computation in the enqueue path is just overhead
for dubious value especially under the consideration that the
vast majority of timer wheel timers are either canceled or
rearmed before they expire.
The timer pull model avoids the above by removing the target
computation on enqueue and queueing timers always on the CPU on
which they get armed.
This is achieved by having separate wheels for CPU pinned timers
and global timers which do not care about where they expire.
As long as a CPU is busy it handles both the pinned and the global
timers which are queued on the CPU local timer wheels.
When a CPU goes idle it evaluates its own timer wheels:
- If the first expiring timer is a pinned timer, then the global
timers can be ignored as the CPU will wake up before they
expire.
- If the first expiring timer is a global timer, then the expiry
time is propagated into the timer pull hierarchy and the CPU
makes sure to wake up for the first pinned timer.
The timer pull hierarchy organizes CPUs in groups of eight at the
lowest level and at the next levels groups of eight groups up to
the point where no further aggregation of groups is required, i.e.
the number of levels is log8(NR_CPUS). The magic number of eight
has been established by experimention, but can be adjusted if
needed.
In each group one busy CPU acts as the migrator. It's only one CPU
to avoid lock contention on remote timer wheels.
The migrator CPU checks in its own timer wheel handling whether
there are other CPUs in the group which have gone idle and have
global timers to expire. If there are global timers to expire, the
migrator locks the remote CPU timer wheel and handles the expiry.
Depending on the group level in the hierarchy this handling can
require to walk the hierarchy downwards to the CPU level.
Special care is taken when the last CPU goes idle. At this point
the CPU is the systemwide migrator at the top of the hierarchy and
it therefore cannot delegate to the hierarchy. It needs to arm its
own timer device to expire either at the first expiring timer in
the hierarchy or at the first CPU local timer, which ever expires
first.
This completely removes the overhead from the enqueue path, which
is e.g. for networking a true hotpath and trades it for a slightly
more complex idle path.
This has been in development for a couple of years and the final
series has been extensively tested by various teams from silicon
vendors and ran through extensive CI.
There have been slight performance improvements observed on network
centric workloads and an Intel team confirmed that this allows them
to power down a die completely on a mult-die socket for the first
time in a mostly idle scenario.
There is only one outstanding ~1.5% regression on a specific
overloaded netperf test which is currently investigated, but the
rest is either positive or neutral performance wise and positive on
the power management side.
- Fixes for the timekeeping interpolation code for cross-timestamps:
cross-timestamps are used for PTP to get snapshots from hardware
timers and interpolated them back to clock MONOTONIC. The changes
address a few corner cases in the interpolation code which got the
math and logic wrong.
- Simplifcation of the clocksource watchdog retry logic to
automatically adjust to handle larger systems correctly instead of
having more incomprehensible command line parameters.
- Treewide consolidation of the VDSO data structures.
- The usual small improvements and cleanups all over the place"
* tag 'timers-core-2024-03-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (62 commits)
timer/migration: Fix quick check reporting late expiry
tick/sched: Fix build failure for CONFIG_NO_HZ_COMMON=n
vdso/datapage: Quick fix - use asm/page-def.h for ARM64
timers: Assert no next dyntick timer look-up while CPU is offline
tick: Assume timekeeping is correctly handed over upon last offline idle call
tick: Shut down low-res tick from dying CPU
tick: Split nohz and highres features from nohz_mode
tick: Move individual bit features to debuggable mask accesses
tick: Move got_idle_tick away from common flags
tick: Assume the tick can't be stopped in NOHZ_MODE_INACTIVE mode
tick: Move broadcast cancellation up to CPUHP_AP_TICK_DYING
tick: Move tick cancellation up to CPUHP_AP_TICK_DYING
tick: Start centralizing tick related CPU hotplug operations
tick/sched: Don't clear ts::next_tick again in can_stop_idle_tick()
tick/sched: Rename tick_nohz_stop_sched_tick() to tick_nohz_full_stop_tick()
tick: Use IS_ENABLED() whenever possible
tick/sched: Remove useless oneshot ifdeffery
tick/nohz: Remove duplicate between lowres and highres handlers
tick/nohz: Remove duplicate between tick_nohz_switch_to_nohz() and tick_setup_sched_timer()
hrtimer: Select housekeeping CPU during migration
...
|
||
|
Arnd Bergmann
|
59f33701fd |
RISC-V Devicetree fixes for v6.8-final
Starfive: The previous cleanup broke boot on the jh7100 as the driver depended on the fallback clock name created based on the node-name when clock-output-names is not present. Add clock-output-names to restore working order. Generic: BUILTIN_DTB has been broken for ages on any platform other than the nommu Canaan k210 SoC as the first dtb built (in alphanumerical order), would get built into the image. This didn't get fixed for ages because nobody actually cared about running it other than the k210 enough to fix it. The folks doing Sophgo SG2042 development have come along and fixed it, as they want to use builtin dtbs. linux-boot on that platform reuses the dtb it was provided by OpenSBI when booting linux proper, which is unfortunately not possible to boot a mainline kernel with. Signed-off-by: Conor Dooley <conor.dooley@microchip.com> -----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQRh246EGq/8RLhDjO14tDGHoIJi0gUCZeiwSAAKCRB4tDGHoIJi 0i35AP9Nm72QRsmcW1EaICAQDkfPyPVdpHp1WkHIDyNHcjPkrgEAtPy4Mlz9LIhx pQ5QuXV2mqkjE+Ts5k0efkL1Am8MZgs= =zUP6 -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmXuq9gACgkQYKtH/8kJ UicLQA//aej0KLwRRJCcajZxsLiHsMnV2wbCUod1TvH7A3WXwUUncMTNUAnPE4fC zTQ6gYVthP+IciKaOCxj806CAIIBt3j904NfbzQ24EFzUJkfX4j7Kd+ru1UVs1vS QfWQ3lamvhsAfI8wcm3TA/UVUBkY8zTvy35jFeSjzLd4BAuZ21Ne4j7ShmR7JvE6 dpwHZX5KC4yvsVgoZE5kVVkFnx7RQ6D4oxQFaqSlYJ43LCA3YKwToLtCEs640bwq tBAYAU61Bkouk3ePmusIAkNJGK3KbaByuxmTqB/03k0OQ0ANUFD89YLhH/YrrmGG JcC/LL5AkoG0VHcIB0SXMeJEwOKUYtJrXs9+sLyDKVJeCmsuuyOaorOMLF/NyZmy bHB7uUtLaXzh+kv0ayTEtq9J7OskTmB1qbMusFvKJirPv0ltVAC5hG9wEPPdy1kG B7NfsIgCyId+1DKb/4Gae8w5V9reoqP1ftwNbcEyp2aXFyJvIz56O1IEBMk5ZYfq a+AzW7b+gHgpw7BlfiUPEYsbt4qeUvSQTU90rTmu+nUxOgJ9KBWY9Nk2yo0Bs/wf vDIG4jQmA1rEt10myqdgPSR4eYEMXSkwNbtqbWiV4LMbT1iVrd8/e1Kb6zBo/GpM veAGNQ6l271aKwoqobU3RuTQm/uPSmWww12In4IPEEqMRNzBZ5A= =Ad6q -----END PGP SIGNATURE----- Merge tag 'riscv-dt-fixes-for-v6.8-final' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux into soc/dt RISC-V Devicetree fixes for v6.8-final Starfive: The previous cleanup broke boot on the jh7100 as the driver depended on the fallback clock name created based on the node-name when clock-output-names is not present. Add clock-output-names to restore working order. Generic: BUILTIN_DTB has been broken for ages on any platform other than the nommu Canaan k210 SoC as the first dtb built (in alphanumerical order), would get built into the image. This didn't get fixed for ages because nobody actually cared about running it other than the k210 enough to fix it. The folks doing Sophgo SG2042 development have come along and fixed it, as they want to use builtin dtbs. linux-boot on that platform reuses the dtb it was provided by OpenSBI when booting linux proper, which is unfortunately not possible to boot a mainline kernel with. Signed-off-by: Conor Dooley <conor.dooley@microchip.com> * tag 'riscv-dt-fixes-for-v6.8-final' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux: riscv: dts: Move BUILTIN_DTB_SOURCE to common Kconfig riscv: dts: starfive: jh7100: fix root clock names Link: https://lore.kernel.org/r/20240306-waltz-facial-9e4e1b792053@spud Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Jakub Kicinski
|
e3afe5dd3a |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Cross-merge networking fixes after downstream PR. No conflicts. Adjacent changes: net/core/page_pool_user.c |
||
|
Puranjay Mohan
|
e63985ecd2 |
bpf, riscv64/cfi: Support kCFI + BPF on riscv64
The riscv BPF JIT doesn't emit proper kCFI prologues for BPF programs and struct_ops trampolines when CONFIG_CFI_CLANG is enabled. This causes CFI failures when calling BPF programs and can even crash the kernel due to invalid memory accesses. Example crash: root@rv-selftester:~/bpf# ./test_progs -a dummy_st_ops Unable to handle kernel paging request at virtual address ffffffff78204ffc Oops [#1] Modules linked in: bpf_testmod(OE) [....] CPU: 3 PID: 356 Comm: test_progs Tainted: P OE 6.8.0-rc1 #1 Hardware name: riscv-virtio,qemu (DT) epc : bpf_struct_ops_test_run+0x28c/0x5fc ra : bpf_struct_ops_test_run+0x26c/0x5fc epc : ffffffff82958010 ra : ffffffff82957ff0 sp : ff200000007abc80 gp : ffffffff868d6218 tp : ff6000008d87b840 t0 : 000000000000000f t1 : 0000000000000000 t2 : 000000002005793e s0 : ff200000007abcf0 s1 : ff6000008a90fee0 a0 : 0000000000000000 a1 : 0000000000000000 a2 : 0000000000000000 a3 : 0000000000000000 a4 : 0000000000000000 a5 : ffffffff868dba26 a6 : 0000000000000001 a7 : 0000000052464e43 s2 : 00007ffffc0a95f0 s3 : ff6000008a90fe80 s4 : ff60000084c24c00 s5 : ffffffff78205000 s6 : ff60000088750648 s7 : ff20000000035008 s8 : fffffffffffffff4 s9 : ffffffff86200610 s10: 0000000000000000 s11: 0000000000000000 t3 : ffffffff8483dc30 t4 : ffffffff8483dc10 t5 : ffffffff8483dbf0 t6 : ffffffff8483dbd0 status: 0000000200000120 badaddr: ffffffff78204ffc cause: 000000000000000d [<ffffffff82958010>] bpf_struct_ops_test_run+0x28c/0x5fc [<ffffffff805083ee>] bpf_prog_test_run+0x170/0x548 [<ffffffff805029c8>] __sys_bpf+0x2d2/0x378 [<ffffffff804ff570>] __riscv_sys_bpf+0x5c/0x120 [<ffffffff8000e8fe>] syscall_handler+0x62/0xe4 [<ffffffff83362df6>] do_trap_ecall_u+0xc6/0x27c [<ffffffff833822c4>] ret_from_exception+0x0/0x64 Code: b603 0109 b683 0189 b703 0209 8493 0609 157d 8d65 (a303) ffca ---[ end trace 0000000000000000 ]--- Kernel panic - not syncing: Fatal exception SMP: stopping secondary CPUs Implement proper kCFI prologues for the BPF programs and callbacks and drop __nocfi for riscv64. Fix the trampoline generation code to emit kCFI prologue when a struct_ops trampoline is being prepared. Signed-off-by: Puranjay Mohan <puranjay12@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Björn Töpel <bjorn@kernel.org> Link: https://lore.kernel.org/bpf/20240303170207.82201-2-puranjay12@gmail.com |
||
|
Arnd Bergmann
|
5394f1e9b6 |
arch: define CONFIG_PAGE_SIZE_*KB on all architectures
Most architectures only support a single hardcoded page size. In order to ensure that each one of these sets the corresponding Kconfig symbols, change over the PAGE_SHIFT definition to the common one and allow only the hardware page size to be selected. Acked-by: Guo Ren <guoren@kernel.org> Acked-by: Heiko Carstens <hca@linux.ibm.com> Acked-by: Stafford Horne <shorne@gmail.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Yangyu Chen
|
2672031b20 |
riscv: dts: Move BUILTIN_DTB_SOURCE to common Kconfig
The BUILTIN_DTB_SOURCE was only configured for K210 before. Since SOC_BUILTIN_DTB_DECLARE was removed at commit |
||
|
Krzysztof Kozlowski
|
7921e231f8 |
riscv: dts: starfive: jh7100: fix root clock names
JH7100 clock controller driver depends on certain root clock names.
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Closes: https://lore.kernel.org/all/CAMuHMdWw0dteXO2jw4cwGvzKcL6vmnb96C=qgPgUqNDMtF6X0Q@mail.gmail.com/
Fixes:
|
||
|
Thomas Gleixner
|
712610725c |
smp: Consolidate smp_prepare_boot_cpu()
There is no point in having seven architectures implementing the same empty stub. Provide a weak function in the init code and remove the stubs. This also allows to utilize the function on UP which is required to sanitize the per CPU handling on X86 UP. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lore.kernel.org/r/20240304005104.567671691@linutronix.de |
||
|
Arnd Bergmann
|
f9c59f2482 |
RISC-V Devicetrees for v6.9
Sophgo: Added reset support for SG2042. Also updated maintainer information for SOPHGO vendor support. Signed-off-by: Chen Wang <unicorn_wang@outlook.com> -----BEGIN PGP SIGNATURE----- iQGzBAABCgAdFiEEyXBewyFOIoMq4pDN7RKLaY1m8IIFAmXdMCsACgkQ7RKLaY1m 8IKX+Av7B1kOwnjziIpP6TEMz2/mY6LEPyLWwC3uHeoAR4pPw96fbaANqmopkWwB dD8lZ8hvpsl/vi8eWbYajhAP9mzlgJzIqSalszdn0J2v/f8S0/4jVeBt56vW70sz 28r83drHLNeSwtGQX78WDrSvz/f0Q1Awgirl+/7DcI4sTg46rBQvJ22GAHrLnSQ9 rKxGz86ozGIWOfMwnM/GFzOXtMqK4htJHaVcKWTSjwvIxH4pKOyCnaf4ODJ7XX3k W4PvX+DY98tjdpzGLrdS9+n06y+uNIxUSO8XvCwWqcWOELw34xd3yEXAeDFidEHk DE52uYoKeZMzmMcZtKPE0oatkjoQg0UiSFadafzh7BsofSoRvF0cFT4BFdiWIjr4 KkooGnWpRujX0K4Ydba68e1Nk9sSE7e/p7jLUJ9bPgpStH6vuHEcmm6Cdokb7Tyb E2a8EO6utlQJghJNkVLUbEjeoD+HawDW52gQDxBX8CJcjfT2ppBFu41x2/d22lP9 kXFRPb6j =Hb4v -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmXleOAACgkQYKtH/8kJ Uid2xhAA2AOfPFQQMnlpzatq7cRkoJqVTEkX/Vuv/jNDndNCaw3og/uhpjJO54Oz 3HggpzTdKCKWzpGo8iOWvZPVBBodPXKupwMTvZPA37h3bEmmX591MlmAzRf9lZmi BiWyBEaP+gYJ4CY0g2KKAfzmpqzLFYx6rE4IYuuyQapgPdbu0qrB+1M7VwQ2PJXp 00xIBTM3wAJYwkvsv9ykiiTuNOtnEslseVELYAJ7Z7QEfYekMpC5UgMeRPZpcdS7 zKnKraN6SH7L0FEtcBVgAIMQxZ3nunJ2ow8ISxdCZXf9KQpYVEF/xGsxqcjaLhmH vjFtur3IJD19SxnP4fHw5d+qLu8ENR0kRWjLHLX+x2yut/EHs/7bZmZj/CGCTmV2 KhK9HDrwE3ETXSHbKbB4dojSjsubsRkaqgKmYeVScf/meXMChQndVuysfX9EbxyT 70KfIitx1Y5AXPLBvtckVxyfV44tcTGxMSs9V4Fb/+VM5XMc+83/f+mWFfbPUHF1 LaXN5v3dQNT0Rd2xcc1gx8U6TjptlE9fGpcJziJMgFWtzGocrN+e2TE42znAxlee fnXSA5oKNxd9IGjqqkmXDF+wvwqptDyzhCQwWdpkXZ/gvYWbIs1SwdkJl0IiKN0y yBNpRI6psd9ZM3V9q8ciia6TPxVpCvxC4m9PKiARgZZ+z/XU6JU= =Q+OV -----END PGP SIGNATURE----- Merge tag 'riscv-sophgo-dt-for-v6.9' of https://github.com/sophgo/linux into soc/dt RISC-V Devicetrees for v6.9 Sophgo: Added reset support for SG2042. Also updated maintainer information for SOPHGO vendor support. Signed-off-by: Chen Wang <unicorn_wang@outlook.com> * tag 'riscv-sophgo-dt-for-v6.9' of https://github.com/sophgo/linux: MAINTAINERS: Setup proper info for SOPHGO vendor support riscv: dts: add resets property for uart node riscv: dts: add reset generator for Sophgo SG2042 SoC Link: https://lore.kernel.org/r/MA0P287MB2822315119DA51FF95EE3071FE5D2@MA0P287MB2822.INDP287.PROD.OUTLOOK.COM Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Jakub Kicinski
|
4b2765ae41 |
bpf-next-for-netdev
-----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCZeEKVAAKCRDbK58LschI g7oYAQD5Jlv4fIVTvxvfZrTTZ2tU+OsPa75mc8SDKwpash3YygEA8kvESy8+t6pg D6QmSf1DIZdFoSp/bV+pfkNWMeR8gwg= =mTAj -----END PGP SIGNATURE----- Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next Daniel Borkmann says: ==================== pull-request: bpf-next 2024-02-29 We've added 119 non-merge commits during the last 32 day(s) which contain a total of 150 files changed, 3589 insertions(+), 995 deletions(-). The main changes are: 1) Extend the BPF verifier to enable static subprog calls in spin lock critical sections, from Kumar Kartikeya Dwivedi. 2) Fix confusing and incorrect inference of PTR_TO_CTX argument type in BPF global subprogs, from Andrii Nakryiko. 3) Larger batch of riscv BPF JIT improvements and enabling inlining of the bpf_kptr_xchg() for RV64, from Pu Lehui. 4) Allow skeleton users to change the values of the fields in struct_ops maps at runtime, from Kui-Feng Lee. 5) Extend the verifier's capabilities of tracking scalars when they are spilled to stack, especially when the spill or fill is narrowing, from Maxim Mikityanskiy & Eduard Zingerman. 6) Various BPF selftest improvements to fix errors under gcc BPF backend, from Jose E. Marchesi. 7) Avoid module loading failure when the module trying to register a struct_ops has its BTF section stripped, from Geliang Tang. 8) Annotate all kfuncs in .BTF_ids section which eventually allows for automatic kfunc prototype generation from bpftool, from Daniel Xu. 9) Several updates to the instruction-set.rst IETF standardization document, from Dave Thaler. 10) Shrink the size of struct bpf_map resp. bpf_array, from Alexei Starovoitov. 11) Initial small subset of BPF verifier prepwork for sleepable bpf_timer, from Benjamin Tissoires. 12) Fix bpftool to be more portable to musl libc by using POSIX's basename(), from Arnaldo Carvalho de Melo. 13) Add libbpf support to gcc in CORE macro definitions, from Cupertino Miranda. 14) Remove a duplicate type check in perf_event_bpf_event, from Florian Lehner. 15) Fix bpf_spin_{un,}lock BPF helpers to actually annotate them with notrace correctly, from Yonghong Song. 16) Replace the deprecated bpf_lpm_trie_key 0-length array with flexible array to fix build warnings, from Kees Cook. 17) Fix resolve_btfids cross-compilation to non host-native endianness, from Viktor Malik. * tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (119 commits) selftests/bpf: Test if shadow types work correctly. bpftool: Add an example for struct_ops map and shadow type. bpftool: Generated shadow variables for struct_ops maps. libbpf: Convert st_ops->data to shadow type. libbpf: Set btf_value_type_id of struct bpf_map for struct_ops. bpf: Replace bpf_lpm_trie_key 0-length array with flexible array bpf, arm64: use bpf_prog_pack for memory management arm64: patching: implement text_poke API bpf, arm64: support exceptions arm64: stacktrace: Implement arch_bpf_stack_walk() for the BPF JIT bpf: add is_async_callback_calling_insn() helper bpf: introduce in_sleepable() helper bpf: allow more maps in sleepable bpf programs selftests/bpf: Test case for lacking CFI stub functions. bpf: Check cfi_stubs before registering a struct_ops type. bpf: Clarify batch lookup/lookup_and_delete semantics bpf, docs: specify which BPF_ABS and BPF_IND fields were zero bpf, docs: Fix typos in instruction-set.rst selftests/bpf: update tcp_custom_syncookie to use scalar packet offset bpf: Shrink size of struct bpf_map/bpf_array. ... ==================== Link: https://lore.kernel.org/r/20240301001625.8800-1-daniel@iogearbox.net Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Linus Torvalds
|
d17468c6f1 |
RISC-V Fixes for 6.8-rc7
* A fix for detecting ".option arch" support on not-yet-released LLVM builds. * A fix for a missing TLB flush when modifying non-leaf PTEs. * A handufl of fixes for T-Head custom extensions. * A fix for systems with the legacy PMU, that manifests as a crash on kernels built without SBI PMU support. * A fix for systems that clear *envcfg on suspend, which manifests as cbo.zero trapping after resume. * A pair of fixes for Svnapot systems, including removing Svnapot support for huge vmalloc/vmap regions. -----BEGIN PGP SIGNATURE----- iQJHBAABCAAxFiEEKzw3R0RoQ7JKlDp6LhMZ81+7GIkFAmXh8A0THHBhbG1lckBk YWJiZWx0LmNvbQAKCRAuExnzX7sYif7tD/9mlPpK/OZs9U8DXVpZU91iEekVU7ss CWY+Y9+fx9hjOahqUgJ72aG6mj5p9DW9cqz+73Ktds4xGCrh3Sr734nAFTshpo2K IiKx+Ruq6YIURzXMcNuQ4JHAOMI4P4p34cha+fZ5ORPXRKLJQqBR3eNFBa5NHuR4 md6TaU0gJAZE3yY2llLJOPlj9cT8swPV4gc8I0pUb4gKYj3sU/2HWVEYfiBoDnjo XUSNV2ts9mWv7OGgBqS1QqdZeFKizPp87PRfzNBye5Gx8mpUXS52Z+W7vr6f/EUf stWhDnR2XQ2HYSPoo5rQqIfZHH9dp+DUtqGjNo+jX54OoFAvHHtlhrEVC4q3uGkY Y3RoIe17s1EvozMKXCVQ+tCrhOh/jttye5Om5gb8yJ2clATL5dJM/jkoMKMdIh5n KLhZBYLrgN/Z0Mb0wePnlXhVnW2/N4ruIlP5Kd+wHRR+rUlQm6Xjccg4r5MgxMgK iaVbBZ/JTkJhP/II5ACr519Mz5Nh2N1QKTQkbHA5XWrn9+SDnF9Dio/EurPshvmm xJYcG42sxkI4V9UEmriyiAs6NqIDTKyNoA28WXYLVDCrFomtehmttS9RWE7FqPku mAUIUd3hbP4Qrt81Gus+CwCIZSuVhJin+3VUAI6Z6FpImDoamquJvIQ3aYtZ/nye pDSC3QhivYUA6A== =FpVN -----END PGP SIGNATURE----- Merge tag 'riscv-for-linus-6.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull RISC-V fixes from Palmer Dabbelt: - detect ".option arch" support on not-yet-released LLVM builds - fix missing TLB flush when modifying non-leaf PTEs - fixes for T-Head custom extensions - fix for systems with the legacy PMU, that manifests as a crash on kernels built without SBI PMU support - fix for systems that clear *envcfg on suspend, which manifests as cbo.zero trapping after resume - fixes for Svnapot systems, including removing Svnapot support for huge vmalloc/vmap regions * tag 'riscv-for-linus-6.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: riscv: Sparse-Memory/vmemmap out-of-bounds fix riscv: Fix pte_leaf_size() for NAPOT Revert "riscv: mm: support Svnapot in huge vmap" riscv: Save/restore envcfg CSR during CPU suspend riscv: Add a custom ISA extension for the [ms]envcfg CSR riscv: Fix enabling cbo.zero when running in M-mode perf: RISCV: Fix panic on pmu overflow handler MAINTAINERS: Update SiFive driver maintainers drivers: perf: ctr_get_width function for legacy is not defined drivers: perf: added capabilities for legacy PMU RISC-V: Ignore V from the riscv,isa DT property on older T-Head CPUs riscv: Fix build error if !CONFIG_ARCH_ENABLE_HUGEPAGE_MIGRATION riscv: mm: fix NOCACHE_THEAD does not set bit[61] correctly riscv: add CALLER_ADDRx support RISC-V: Drop invalid test from CONFIG_AS_HAS_OPTION_ARCH kbuild: Add -Wa,--fatal-warnings to as-instr invocation riscv: tlb: fix __p*d_free_tlb() |
||
|
Dimitris Vlachos
|
a11dd49dcb
|
riscv: Sparse-Memory/vmemmap out-of-bounds fix
Offset vmemmap so that the first page of vmemmap will be mapped
to the first page of physical memory in order to ensure that
vmemmap’s bounds will be respected during
pfn_to_page()/page_to_pfn() operations.
The conversion macros will produce correct SV39/48/57 addresses
for every possible/valid DRAM_BASE inside the physical memory limits.
v2:Address Alex's comments
Suggested-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Signed-off-by: Dimitris Vlachos <dvlachos@ics.forth.gr>
Reported-by: Dimitris Vlachos <dvlachos@ics.forth.gr>
Closes: https://lore.kernel.org/linux-riscv/20240202135030.42265-1-csd4492@csd.uoc.gr
Fixes:
|
||
|
Palmer Dabbelt
|
2b8acd7154
|
Merge patch series "NAPOT Fixes"
Alexandre Ghiti <alexghiti@rivosinc.com> says: This contains 2 fixes for NAPOT: patch 1 disables the use of NAPOT mapping for vmalloc/vmap and patch 2 implements pte_leaf_size() to report NAPOT size. * b4-shazam-merge: riscv: Fix pte_leaf_size() for NAPOT Revert "riscv: mm: support Svnapot in huge vmap" Link: https://lore.kernel.org/r/20240227205016.121901-1-alexghiti@rivosinc.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> |
||
|
Alexandre Ghiti
|
e0fe5ab419
|
riscv: Fix pte_leaf_size() for NAPOT
pte_leaf_size() must be reimplemented to add support for NAPOT mappings.
Fixes:
|
||
|
Alexandre Ghiti
|
16ab4646c9
|
Revert "riscv: mm: support Svnapot in huge vmap"
This reverts commit |
||
|
Palmer Dabbelt
|
e2b6bc28ec
|
Merge patch series "riscv: cbo.zero fixes"
Samuel Holland <samuel.holland@sifive.com> says: This series fixes a couple of issues related to using the cbo.zero instruction in userspace. The first patch fixes a bug where the wrong enable bit gets set if the kernel is running in M-mode. The remaining patches fix a bug where the enable bit gets reset to its default value after a nonretentive idle state. I have hardware which reproduces this: Before this series: $ tools/testing/selftests/riscv/hwprobe/cbo TAP version 13 1..3 ok 1 Zicboz block size # Zicboz block size: 64 Illegal instruction After applying this series: $ tools/testing/selftests/riscv/hwprobe/cbo TAP version 13 1..3 ok 1 Zicboz block size # Zicboz block size: 64 ok 2 cbo.zero ok 3 cbo.zero check # Totals: pass:3 fail:0 xfail:0 xpass:0 skip:0 error:0 * b4-shazam-merge: riscv: Save/restore envcfg CSR during CPU suspend riscv: Add a custom ISA extension for the [ms]envcfg CSR riscv: Fix enabling cbo.zero when running in M-mode Link: https://lore.kernel.org/r/20240228065559.3434837-1-samuel.holland@sifive.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> |
||
|
Samuel Holland
|
05ab803d1a
|
riscv: Save/restore envcfg CSR during CPU suspend
The value of the [ms]envcfg CSR is lost when entering a nonretentive
idle state, so the CSR must be rewritten when resuming the CPU.
Cc: <stable@vger.kernel.org> # v6.7+
Fixes:
|
||
|
Samuel Holland
|
4774848fef
|
riscv: Add a custom ISA extension for the [ms]envcfg CSR
The [ms]envcfg CSR was added in version 1.12 of the RISC-V privileged ISA (aka S[ms]1p12). However, bits in this CSR are defined by several other extensions which may be implemented separately from any particular version of the privileged ISA (for example, some unrelated errata may prevent an implementation from claiming conformance with Ss1p12). As a result, Linux cannot simply use the privileged ISA version to determine if the CSR is present. It must also check if any of these other extensions are implemented. It also cannot probe the existence of the CSR at runtime, because Linux does not require Sstrict, so (in the absence of additional information) it cannot know if a CSR at that address is [ms]envcfg or part of some non-conforming vendor extension. Since there are several standard extensions that imply the existence of the [ms]envcfg CSR, it becomes unwieldy to check for all of them wherever the CSR is accessed. Instead, define a custom Xlinuxenvcfg ISA extension bit that is implied by the other extensions and denotes that the CSR exists as defined in the privileged ISA, containing at least one of the fields common between menvcfg and senvcfg. This extension does not need to be parsed from the devicetree or ISA string because it can only be implemented as a subset of some other standard extension. Cc: <stable@vger.kernel.org> # v6.7+ Signed-off-by: Samuel Holland <samuel.holland@sifive.com> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Reviewed-by: Andrew Jones <ajones@ventanamicro.com> Link: https://lore.kernel.org/r/20240228065559.3434837-3-samuel.holland@sifive.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> |
||
|
Samuel Holland
|
3fb3f7164e
|
riscv: Fix enabling cbo.zero when running in M-mode
When the kernel is running in M-mode, the CBZE bit must be set in the
menvcfg CSR, not in senvcfg.
Cc: <stable@vger.kernel.org>
Fixes:
|
||
|
Linus Torvalds
|
e44baca779 |
Arm and RISC-V SoC fixes for 6.8, part 2
The Rockchip and IMX8 platforms get a number of fixes for dts files in order to address some misconfigurations, including a regression for USB-C support on some boards. The other dts fixes are part of a series by Rob Herring to clean up another class of dtc compiler warnings across all platforms, with a few others helping out as well. With this, we can enable the warning for the coming merge window without introducing regressions. Conor Dooley has collected fixes for RISC-V platforms, both for the dts files and for platofrm specific drivers. The ep93xx platform gets a regression for for its gpio descriptors. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmXYmjcACgkQYKtH/8kJ UieiAw/+K1bDnxVhgHB8PXAToCF+fhNCpaSUp/oShz2cbPYcExOn2XMWPvkRp/Jo lEsZPr9E4M13ot0P/KOQO7J8aGYiaBca0enHD3EflPNo84qjnZfmBSnFVV9JHEk0 WzyZBPlm1Ynz97bMr56KqzeJBdn+iYwpf7Ekp7OqOmTB7Y/q3DGr67TCLcxO+QJD s2pObk4CODeC8JuWDQ5SpA0K8KA6fO7ubGe2ecOJkaLqtdDoe6dMbnJ3VFtBKd4Y 0uL2E0WGNsAP4fkYCeajTEKRmqjbWfNiFsgva4RFPVjcyKBqi890Mkes4MhS/bTo wCV/6AWYuIfZnKmzKGJp0Bj4cl2ZNEc6M+G5XQMHmlXrrTe2aFiKeibc56uKKrjC 17DoPWD4oIUH3TLh0vRhRCG0/aagTeGYerOTtPKKs+vLfSqri7nv3gW7Cybm1oPh xcI2ieMNzLTEio3bQ1fu7B/wBWjtjGhi0VFsEQcj5wQpLuvMC4G5I1el0zbAlzri YzXRbNIkg7PRgOdNQ4d3FzM8TaKcG15AHOi56VXGz/aV7yBInMxfSrTEkzY/KFXN oXIhPRwJW3pDEa3dEcGataLwgVdZtCOdAi8CdEal5l8H33+WIKBN8jxlxirxs7IQ sxMaunOSSCOH+j71bwxuI5wFQ/OevX+lX+0AEAqh+qyuatw1d8I= =iNfa -----END PGP SIGNATURE----- Merge tag 'arm-fixes-6.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull arm and RISC-V SoC fixes from Arnd Bergmann: "The Rockchip and IMX8 platforms get a number of fixes for dts files in order to address some misconfigurations, including a regression for USB-C support on some boards. The other dts fixes are part of a series by Rob Herring to clean up another class of dtc compiler warnings across all platforms, with a few others helping out as well. With this, we can enable the warning for the coming merge window without introducing regressions. Conor Dooley has collected fixes for RISC-V platforms, both for the dts files and for platofrm specific drivers. The ep93xx platform gets a regression for for its gpio descriptors" * tag 'arm-fixes-6.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (28 commits) ARM: dts: renesas: rcar-gen2: Add missing #interrupt-cells to DA9063 nodes cache: ax45mp_cache: Align end size to cache boundary in ax45mp_dma_cache_wback() arm64: dts: qcom: Fix interrupt-map cell sizes arm: dts: Fix dtc interrupt_map warnings arm64: dts: Fix dtc interrupt_provider warnings arm: dts: Fix dtc interrupt_provider warnings arm64: dts: freescale: Disable interrupt_map check ARM: ep93xx: Add terminator to gpiod_lookup_table riscv: dts: sifive: add missing #interrupt-cells to pmic arm64: dts: rockchip: Correct Indiedroid Nova GPIO Names arm64: dts: rockchip: Drop interrupts property from rk3328 pwm-rockchip node arm64: dts: rockchip: set num-cs property for spi on px30 arm64: dts: rockchip: minor rk3588 whitespace cleanup riscv: dts: starfive: replace underscores in node names bus: imx-weim: fix valid range check Revert "arm64: dts: imx8mn-var-som-symphony: Describe the USB-C connector" Revert "arm64: dts: imx8mp-dhcom-pdk3: Describe the USB-C connector" arm64: dts: tqma8mpql: fix audio codec iov-supply arm64: dts: rockchip: drop unneeded status from rk3588-jaguar gpio-leds ARM: dts: rockchip: Drop interrupts property from pwm-rockchip nodes ... |
||
|
Conor Dooley
|
d82f32202e
|
RISC-V: Ignore V from the riscv,isa DT property on older T-Head CPUs
Before attempting to support the pre-ratification version of vector
found on older T-Head CPUs, disallow "v" in riscv,isa on these
platforms. The deprecated property has no clear way to communicate
the specific version of vector that is supported and much of the vendor
provided software puts "v" in the isa string. riscv,isa-extensions
should be used instead. This should not be too much of a burden for
these systems, as the vendor shipped devicetrees and firmware do not
work with a mainline kernel and will require updating.
We can limit this restriction to only ignore v in riscv,isa on CPUs
that report T-Head's vendor ID and a zero marchid. Newer T-Head CPUs
that support the ratified version of vector should report non-zero
marchid, according to Guo Ren [1].
Link: https://lore.kernel.org/linux-riscv/CAJF2gTRy5eK73=d6s7CVy9m9pB8p4rAoMHM3cZFwzg=AuF7TDA@mail.gmail.com/ [1]
Fixes:
|
||
|
Arnd Bergmann
|
4bd5b4c2eb |
RISC-V Devicetree fixes for v6.8-rc6
Two fixes for W=2 issues in devicetrees, which should constitute fixes for all reasonable-to-fix W=2 problems on RISC-V. The others are caused by standard USB and MMC property names containing underscores that are not likely to ever change. Signed-off-by: Conor Dooley <conor.dooley@microchip.com> -----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQRh246EGq/8RLhDjO14tDGHoIJi0gUCZdYqJwAKCRB4tDGHoIJi 0tuZAQCozsk1bZtlW00MzSLcM/dGBaxkfxoYFmjsVgk6z/QyzQEAyPcLrkhvifIt N9Cb6fG9/gJGZqaaTa+kA70rh8JjQAo= =iaoh -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmXYlW8ACgkQYKtH/8kJ UiccBhAAoS0Sl3L8D3kTrrEKMfU+FmAmvzJ2QPeTqBj3MprIT6+nNHFDQr1znDOn EUxcTjRx1px1P/qxZjIIssEgN8sPBPK5dcWRfcKEECm2SG15oVZ3zgTxA9i3t+RX 56pu0D0qL8tTxmS6l04Za2RjNzRz6p/OcfwchhIA7dkfK13PxEYHoPixDVhqtq1j dgsOirdsa++fP5KyGAu0o0a8DCB6CULzSX8b9IBWWWuQetUWFo+FpBCS8TmvPzvx zRkQYLBaS8oklgGPadRzullnsCYdTFWaYKdUw8QEGUZZlcIuEbU7M9oxTC1r64LA /Epclsp25ajB7Yx0SBrueyQeLe5RebcyUescTPnccImKt0w7ZgVAUBjzWyMqXrH+ npIMYm2jlRjs5CaZEuW1U1K1c7/cLFMkfI83V5sxi8wjg9HVFsSC2LbT6dofHcGC 5HzfZUDTx3oli6aCL/lmHUvEcVOyQuKLHCXAX3bQZgPkGeWbrbLDEqLeqRuUeed/ FtVn0o6A3Lpl4pXi9F+5SRLuh/lIciBuSmQs2sR2yxfL1lPjYyvOqihbUg+CtWtp a4uilWQnIP+gfJ/5XJE7Gb/AUA8dYgDUtwpGN3Xvbl7Qt9fFx6mNDYHk6KmN8VFD 8+mr1RzFD8Ww9qPDzhBvp5KT6HX70fNu5gvoqQmL6rb+MOpGtdQ= =CyGI -----END PGP SIGNATURE----- Merge tag 'riscv-dt-fixes-for-v6.8-rc6' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux into arm/fixes RISC-V Devicetree fixes for v6.8-rc6 Two fixes for W=2 issues in devicetrees, which should constitute fixes for all reasonable-to-fix W=2 problems on RISC-V. The others are caused by standard USB and MMC property names containing underscores that are not likely to ever change. Signed-off-by: Conor Dooley <conor.dooley@microchip.com> * tag 'riscv-dt-fixes-for-v6.8-rc6' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux: riscv: dts: sifive: add missing #interrupt-cells to pmic riscv: dts: starfive: replace underscores in node names Link: https://lore.kernel.org/r/20240221-foil-glade-09dbf1aa3fe2@spud Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Chen Wang
|
08573ba006 |
riscv: dts: add resets property for uart node
Add resets property for uart0 for completeness, although it is deasserted by default. Signed-off-by: Chen Wang <unicorn_wang@outlook.com> Reviewed-by: Inochi Amaoto <inochiama@outlook.com> Link: https://lore.kernel.org/r/807f75e433a0f900da40ebb6a448349c98580072.1706577450.git.unicorn_wang@outlook.com Signed-off-by: Inochi Amaoto <inochiama@outlook.com> |
||
|
Chen Wang
|
1ce7587e50 |
riscv: dts: add reset generator for Sophgo SG2042 SoC
Add reset generator node to device tree for SG2042. Signed-off-by: Chen Wang <unicorn_wang@outlook.com> Reviewed-by: Inochi Amaoto <inochiama@outlook.com> Link: https://lore.kernel.org/r/b2f5d7cd2d3fccfc00cf4563d2dd7363b0fa2fca.1706577450.git.unicorn_wang@outlook.com Signed-off-by: Inochi Amaoto <inochiama@outlook.com> |
||
|
Alexandre Ghiti
|
fc325b1a91
|
riscv: Fix build error if !CONFIG_ARCH_ENABLE_HUGEPAGE_MIGRATION
The new riscv specific arch_hugetlb_migration_supported() must be
guarded with a #ifdef CONFIG_ARCH_ENABLE_HUGEPAGE_MIGRATION to avoid
the following build error:
In file included from include/linux/hugetlb.h:851,
from kernel/fork.c:52:
>> arch/riscv/include/asm/hugetlb.h:15:42: error: static declaration of 'arch_hugetlb_migration_supported' follows non-static declaration
15 | #define arch_hugetlb_migration_supported arch_hugetlb_migration_supported
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
include/linux/hugetlb.h:916:20: note: in expansion of macro 'arch_hugetlb_migration_supported'
916 | static inline bool arch_hugetlb_migration_supported(struct hstate *h)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
arch/riscv/include/asm/hugetlb.h:14:6: note: previous declaration of 'arch_hugetlb_migration_supported' with type 'bool(struct hstate *)' {aka '_Bool(struct hstate *)'}
14 | bool arch_hugetlb_migration_supported(struct hstate *h);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202402110258.CV51JlEI-lkp@intel.com/
Fixes:
|
||
|
Yangyu Chen
|
c21f014818
|
riscv: mm: fix NOCACHE_THEAD does not set bit[61] correctly
Previous commit |
||
|
Zong Li
|
680341382d
|
riscv: add CALLER_ADDRx support
CALLER_ADDRx returns caller's address at specified level, they are used
for several tracers. These macros eventually use
__builtin_return_address(n) to get the caller's address if arch doesn't
define their own implementation.
In RISC-V, __builtin_return_address(n) only works when n == 0, we need
to walk the stack frame to get the caller's address at specified level.
data.level started from 'level + 3' due to the call flow of getting
caller's address in RISC-V implementation. If we don't have additional
three iteration, the level is corresponding to follows:
callsite -> return_address -> arch_stack_walk -> walk_stackframe
| | | |
level 3 level 2 level 1 level 0
Fixes:
|
||
|
Palmer Dabbelt
|
4af24146aa
|
Merge commit '8246601a7d391ce8207408149d65732f28af81a1' into fixes
This single fix is also part of a larger cleanup, so I'm merging it into my fixes branch so it can be shared with for-next. * commit '8246601a7d391ce8207408149d65732f28af81a1': riscv: tlb: fix __p*d_free_tlb() |
||
|
Palmer Dabbelt
|
58506612bf
|
Merge patch series "RISC-V: Fix CONFIG_AS_HAS_OPTION_ARCH with tip of tree LLVM"
Nathan Chancellor <nathan@kernel.org> says:
Eric reported that builds of LLVM with [1] (close to tip of tree) have
CONFIG_AS_HAS_OPTION_ARCH=n because the test for expected failure on
invalid input has started succeeding.
This Kconfig test was added because '.option arch' only causes an
assembler warning when it is unsupported, rather than a hard error,
which is what users of as-instr expect when something is unsupported.
This can be resolved by turning assembler warnings into errors with
'-Wa,--fatal-warnings' like we do with the compiler with '-Werror',
which is what the first patch does. The second patch removes the invalid
test, as the valid test is good enough with fatal warnings.
I have diffed several configurations for the different architectures
that use as-instr and I have found no issues.
[1]:
|
||
|
Anna-Maria Behnsen
|
eba755314f |
riscv: vdso: Use generic union vdso_data_store
There is already a generic union definition for vdso_data_store in the vdso datapage header. Use this definition to prevent code duplication. Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20240220085212.6547-1-anna-maria@linutronix.de |
||
|
Nathan Chancellor
|
3aff0c459e
|
RISC-V: Drop invalid test from CONFIG_AS_HAS_OPTION_ARCH
Commit |
||
|
Paolo Bonzini
|
e67391ca7a |
KVM/riscv fixes for 6.8, take #1
- Fix steal-time related sparse warnings -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEZdn75s5e6LHDQ+f/rUjsVaLHLAcFAmXF2ocACgkQrUjsVaLH LAdYEw//WAiykSiyG0hUbd6/UKKK9EE9wb0wU8bp4D2KCcf4q9u6YVhMRzzT7cKT 8xL28YrRpkb0mDG0WIbzyRQzpT0Gfji0sS9F+NhtG4RiWQQohLWX9oV1QBuf7fZ7 yEZ/9YUwgrGWy2Agxh+0Sh/ji+M9ZjJWYndxb4MRJ8F0HI1K6vKeAt3Z0yxTdLHK 6KdTUrGnRjXg65A5mtKy4kJw//QH/khmLKwBK/zL2fQ04zR/JISz51Q2Wbid2t/4 3Qip0dR9YoOFjSm/6jPv1vRvN3+U7Gd8wxl8kgl+/WHUb/vffBygdL/RPjhYz3ht VlerVWUfCrJMqFclXGF5JnnKPLA70Sud+bNFgcY1rkA3+d3DQFQIZy/iocDmMePV U/uQkNSVPDVVumNlFxaAFOdNw0eMWBY10LZENw9t5N04KkGuyjODpdDbc4zVFJbe 5CEXAwQ4H/1j0jXgRwP8corckLhUx2oNgdKTIJ7MQ67Q31MWClCvB4FPVu41ZNHJ 6RxjYkbFTGPcceDBdMl4Y1UKrJ94s8s8MzfFtIPUP55Zor9xR4+NsJjRC955gEJI A4X5zHez2jMxhvPNje6uoK3zc3LZCf0BcROXNcXJrcW3cTFICho7UWk02MLNz7z3 gdsIsRjWSlcxViNC3/Em7cnud7/vRvCGQikZ6TARoO/4ALF6E00= =2svK -----END PGP SIGNATURE----- Merge tag 'kvm-riscv-fixes-6.8-1' of https://github.com/kvm-riscv/linux into HEAD KVM/riscv fixes for 6.8, take #1 - Fix steal-time related sparse warnings |
||
|
Conor Dooley
|
ce6b6d1513 |
riscv: dts: sifive: add missing #interrupt-cells to pmic
At W=2 dtc complains: hifive-unmatched-a00.dts:120.10-238.4: Warning (interrupt_provider): /soc/i2c@10030000/pmic@58: Missing '#interrupt-cells' in interrupt provider Add the missing property. Reviewed-by: Samuel Holland <samuel.holland@sifive.com> Signed-off-by: Conor Dooley <conor.dooley@microchip.com> |
||
|
Krzysztof Kozlowski
|
f036064708 |
riscv: dts: starfive: replace underscores in node names
Underscores should not be used in node names (dtc with W=2 warns about them), so replace them with hyphens. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Conor Dooley <conor.dooley@microchip.com> |
||
|
Linus Torvalds
|
4356e9f841 |
work around gcc bugs with 'asm goto' with outputs
We've had issues with gcc and 'asm goto' before, and we created a 'asm_volatile_goto()' macro for that in the past: see commits |
||
|
Linus Torvalds
|
9ed18b0b77 |
RISC-V Fixes for 6.8-rc4
* A fix for a missing TLB flush during early boot on SPARSEMEM_VMEMMAP configurations. * A handful of fixes to correctly implement the break-before-make behavior requried by the ISA for NAPOT mappings. * A fix for a missing TLB flush on intermediate mapping changes. * A fix for a build warning about a missing declaration of overflow_stack. * A fix for a performace regression related to incorrect tracking of completed batch TLB flushes. -----BEGIN PGP SIGNATURE----- iQJHBAABCAAxFiEEKzw3R0RoQ7JKlDp6LhMZ81+7GIkFAmXGVI0THHBhbG1lckBk YWJiZWx0LmNvbQAKCRAuExnzX7sYiUAJEACKI/LMSahgmQua+pi4DOuRzBpfZja6 8D9rYXfizdHNkZ8Sxc4N8MD8x/KBRDuxIsI04yLeN9b15Y+pfHvRlQm1dc+4lNLh sBz1UkqUAUOO6CaUG+4zShslYydTpnhTaC9ez8djXp7M9NKEC3+55rVZTnJmkNUR Y9fqHyl2BIiRWdnBdNVawFwJZ9VYy19b8+pHIcrJ/r/HR5RbrXJa/3ptUXxZEa3r EuoE10DyBsyatZdCLBB/7Myj+J8dNS/7uZstE/s4s3opDIIikJffoDbtWPTlT+Hb RGvyvixevymw47GLlhkit/L6HXZhVV22suMP4W9No0LuY+IpGjYOIYDvV0qC6xtW p9pqfEAJ2XAaAu2+efuqHwwDgJV4l0emPVzrLl3WNCLSVXZUt2bx8HkEcyEpxVG1 5hLHgQduJq+klffnlu8GgOOfCoum9hwaRNqlgXiIx9pO3pjLWwjd+STYhI2jbG2m Jd0eHezKe+MygeRcC/j/LaGQInNJEEvbRVq5zdIIBE7Hjh8f/+KfxmxvgoTuX3kl OVN5GEl+zPmqGxR8mCl+5uu9PCuRcd+8HUunJhj1TwqDi/JWrzQkw1hXosUGYN0V sbA0bJxqQLJORW2yXIZdPLh5FUDIzxyR6iV9gSSjFbk0cUa4f+9waoIf+zBWre6+ u5TaP/RebOT8bg== =CvsK -----END PGP SIGNATURE----- Merge tag 'riscv-for-linus-6.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull RISC-V fixes from Palmer Dabbelt: - fix missing TLB flush during early boot on SPARSEMEM_VMEMMAP configurations - fixes to correctly implement the break-before-make behavior requried by the ISA for NAPOT mappings - fix a missing TLB flush on intermediate mapping changes - fix build warning about a missing declaration of overflow_stack - fix performace regression related to incorrect tracking of completed batch TLB flushes * tag 'riscv-for-linus-6.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: riscv: Fix arch_tlbbatch_flush() by clearing the batch cpumask riscv: declare overflow_stack as exported from traps.c riscv: Fix arch_hugetlb_migration_supported() for NAPOT riscv: Flush the tlb when a page directory is freed riscv: Fix hugetlb_mask_last_page() when NAPOT is enabled riscv: Fix set_huge_pte_at() for NAPOT mapping riscv: mm: execute local TLB flush after populating vmemmap |
||
|
Andrew Jones
|
f072b272aa |
RISC-V: KVM: Use correct restricted types
__le32 and __le64 types should be used with le32_to_cpu() and
le64_to_cpu() and __user is needed for pointers referencing
guest memory, as sparse helpfully points out.
Fixes:
|
||
|
Andrew Jones
|
3752219b60 |
RISC-V: paravirt: Use correct restricted types
__le32 and __le64 types should be used with le32_to_cpu() and
le64_to_cpu(), as sparse helpfully points out.
Fixes:
|
||
|
Andrew Jones
|
17c8e9ac95 |
RISC-V: paravirt: steal_time should be static
steal_time is not used outside paravirt.c, make it static,
as sparse suggested.
Fixes:
|
||
|
Linus Torvalds
|
860d7dcb20 |
percpu:
- fix riscv wrong size passed to local_flush_tlb_range_asid() -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEE3hZPHJdcVwe+yTTtiDc0yuoFPR0FAmXELE4ACgkQiDc0yuoF PR0zSQ//fmo6menYlj9is3gQufTUuLHpx8AujVKXPqIp7x7pnVff2xGKvOhIFm9x 5TtC53QZa3ifM9FYg6H91i9gjYA8o5Vu03EhTwuJJkqtHzyA04mDFojN2Rkb3Ji4 WAvnoQ+q0exzyWrkaL4QyJGKPv5yEvwNWu5y7EsvtkcUEE4VTqgQOSxVELRU3O1T Zt/tI4CXfZ52wS1oDySxH5mYzm51HltOfEO43k8cKFh5jX7r7/KWsBARyeezk6aL 91yKgSbapTrXrR+pbbBcV+ivsezNqaOBR0Lynl8bHg7L2UL6LgnEGcVtaaDdYelk fiS9EY3wVJp7buz6XqheCX2JY+bNReHd7LaYYGOtdumowD9N57AhtrPHTLrvRadz 5NJZxHqfb+gEyvaMcbhQCtg4vpqYJXtomTyxEX1eNW5ObHBxIYULtwOkVIqhMwCY CdPf1f7n2V6GhH3xg0MvYmC3frDjVwJHlRjRBa690FkDBC1mlv0twJTrCgwgjOyV YkKWXX16wHGhggYfF15mOPyN6JxBxVD8kiLqc1WlviwGyNX70321SUzMFX7CIbX2 RBnh5bd4McXoZokEAbO6DxhKhzECmtKISzYC3+bsAi15nLo7xQezWbRqd5hlbK5b CGTL5rfx26CjcBVdL0HkJbnzZIr4uSp24owPoNTG7deT8qUbDas= =/YlN -----END PGP SIGNATURE----- Merge tag 'percpu-for-6.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/dennis/percpu Pull percpu fix from Dennis Zhou: - fix riscv wrong size passed to local_flush_tlb_range_asid() * tag 'percpu-for-6.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/dennis/percpu: riscv: Fix wrong size passed to local_flush_tlb_range_asid() |
||
|
Alexandre Ghiti
|
3951f6add5
|
riscv: Fix arch_tlbbatch_flush() by clearing the batch cpumask
We must clear the cpumask once we have flushed the batch, otherwise cpus
get accumulated and we end sending IPIs to more cpus than needed.
Fixes:
|
||
|
Ben Dooks
|
2cf9637875
|
riscv: declare overflow_stack as exported from traps.c
The percpu area overflow_stacks is exported from arch/riscv/kernel/traps.c
for use in the entry code, but is not declared anywhere. Add the relevant
declaration to arch/riscv/include/asm/stacktrace.h to silence the following
sparse warning:
arch/riscv/kernel/traps.c:395:1: warning: symbol '__pcpu_scope_overflow_stack' was not declared. Should it be static?
We don't add the stackinfo_get_overflow() call as for some of the other
architectures as this doesn't seem to be used yet, so just silence the
warning.
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Fixes:
|
||
|
Alexandre Ghiti
|
ce68c03545
|
riscv: Fix arch_hugetlb_migration_supported() for NAPOT
arch_hugetlb_migration_supported() must be reimplemented to add support
for NAPOT hugepages, which is done here.
Fixes:
|