Current release - regressions:
- bpf: fix nullness propagation for reg to reg comparisons,
avoid null-deref
- inet: control sockets should not use current thread task_frag
- bpf: always use maximal size for copy_array()
- eth: bnxt_en: don't link netdev to a devlink port for VFs
Current release - new code bugs:
- rxrpc: fix a couple of potential use-after-frees
- netfilter: conntrack: fix IPv6 exthdr error check
- wifi: iwlwifi: fw: skip PPAG for JF, avoid FW crashes
- eth: dsa: qca8k: various fixes for the in-band register access
- eth: nfp: fix schedule in atomic context when sync mc address
- eth: renesas: rswitch: fix getting mac address from device tree
- mobile: ipa: use proper endpoint mask for suspend
Previous releases - regressions:
- tcp: add TIME_WAIT sockets in bhash2, fix regression caught
by Jiri / python tests
- net: tc: don't intepret cls results when asked to drop, fix
oob-access
- vrf: determine the dst using the original ifindex for multicast
- eth: bnxt_en:
- fix XDP RX path if BPF adjusted packet length
- fix HDS (header placement) and jumbo thresholds for RX packets
- eth: ice: xsk: do not use xdp_return_frame() on tx_buf->raw_buf,
avoid memory corruptions
Previous releases - always broken:
- ulp: prevent ULP without clone op from entering the LISTEN status
- veth: fix race with AF_XDP exposing old or uninitialized descriptors
- bpf:
- pull before calling skb_postpull_rcsum() (fix checksum support
and avoid a WARN())
- fix panic due to wrong pageattr of im->image (when livepatch
and kretfunc coexist)
- keep a reference to the mm, in case the task is dead
- mptcp: fix deadlock in fastopen error path
- netfilter:
- nf_tables: perform type checking for existing sets
- nf_tables: honor set timeout and garbage collection updates
- ipset: fix hash:net,port,net hang with /0 subnet
- ipset: avoid hung task warning when adding/deleting entries
- selftests: net:
- fix cmsg_so_mark.sh test hang on non-x86 systems
- fix the arp_ndisc_evict_nocarrier test for IPv6
- usb: rndis_host: secure rndis_query check against int overflow
- eth: r8169: fix dmar pte write access during suspend/resume with WOL
- eth: lan966x: fix configuration of the PCS
- eth: sparx5: fix reading of the MAC address
- eth: qed: allow sleep in qed_mcp_trace_dump()
- eth: hns3:
- fix interrupts re-initialization after VF FLR
- fix handling of promisc when MAC addr table gets full
- refine the handling for VF heartbeat
- eth: mlx5:
- properly handle ingress QinQ-tagged packets on VST
- fix io_eq_size and event_eq_size params validation on big endian
- fix RoCE setting at HCA level if not supported at all
- don't turn CQE compression on by default for IPoIB
- eth: ena:
- fix toeplitz initial hash key value
- account for the number of XDP-processed bytes in interface stats
- fix rx_copybreak value update
Misc:
- ethtool: harden phy stat handling against buggy drivers
- docs: netdev: convert maintainer's doc from FAQ to a normal document
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEE6jPA+I1ugmIBA4hXMUZtbf5SIrsFAmO3MLcACgkQMUZtbf5S
IrsEQBAAijPrpxsGMfX+VMqZ8RPKA3Qg8XF3ji2fSp4c0kiKv6lYI7PzPTR3u/fj
CAlhQMHv7z53uM6Zd7FdUVl23paaEycu8YnlwSubg9z+wSeh/RQ6iq94mSk1PV+K
LLVR/yop2N35Yp/oc5KZMb9fMLkxRG9Ci73QUVVYgvIrSd4Zdm13FjfVjL2C1MZH
Yp003wigMs9IkIHOpHjNqwn/5s//0yXsb1PgKxCsaMdMQsG0yC+7eyDmxshCqsji
xQm15mkGMjvWEYJaa4Tj4L3JW6lWbQzCu9nqPUX16KpmrnScr8S8Is+aifFZIBeW
GZeDYgvjSxNWodeOrJnD3X+fnbrR9+qfx7T9y7XighfytAz5DNm1LwVOvZKDgPFA
s+LlxOhzkDNEqbIsusK/LW+04EFc5gJyTI2iR6s4SSqmH3c3coJZQJeyRFWDZy/x
1oqzcCcq8SwGUTJ9g6HAmDQoVkhDWDT/ZcRKhpWG0nJub972lB2iwM7LrAu+HoHI
r8hyCkHpOi5S3WZKI9gPiGD+yOlpVAuG2wHg2IpjhKQvtd9DFUChGDhFeoB2rqJf
9uI3RJBBYTDkeNu3kpfy5uMh2XhvbIZntK5kwpJ4VettZWFMaOAzn7KNqk8iT4gJ
ASMrUrX59X0TAN0MgpJJm7uGtKbKZOu4lHNm74TUxH7V7bYn7dk=
=TlcN
-----END PGP SIGNATURE-----
Merge tag 'net-6.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bpf, wifi, and netfilter.
Current release - regressions:
- bpf: fix nullness propagation for reg to reg comparisons, avoid
null-deref
- inet: control sockets should not use current thread task_frag
- bpf: always use maximal size for copy_array()
- eth: bnxt_en: don't link netdev to a devlink port for VFs
Current release - new code bugs:
- rxrpc: fix a couple of potential use-after-frees
- netfilter: conntrack: fix IPv6 exthdr error check
- wifi: iwlwifi: fw: skip PPAG for JF, avoid FW crashes
- eth: dsa: qca8k: various fixes for the in-band register access
- eth: nfp: fix schedule in atomic context when sync mc address
- eth: renesas: rswitch: fix getting mac address from device tree
- mobile: ipa: use proper endpoint mask for suspend
Previous releases - regressions:
- tcp: add TIME_WAIT sockets in bhash2, fix regression caught by
Jiri / python tests
- net: tc: don't intepret cls results when asked to drop, fix
oob-access
- vrf: determine the dst using the original ifindex for multicast
- eth: bnxt_en:
- fix XDP RX path if BPF adjusted packet length
- fix HDS (header placement) and jumbo thresholds for RX packets
- eth: ice: xsk: do not use xdp_return_frame() on tx_buf->raw_buf,
avoid memory corruptions
Previous releases - always broken:
- ulp: prevent ULP without clone op from entering the LISTEN status
- veth: fix race with AF_XDP exposing old or uninitialized
descriptors
- bpf:
- pull before calling skb_postpull_rcsum() (fix checksum support
and avoid a WARN())
- fix panic due to wrong pageattr of im->image (when livepatch and
kretfunc coexist)
- keep a reference to the mm, in case the task is dead
- mptcp: fix deadlock in fastopen error path
- netfilter:
- nf_tables: perform type checking for existing sets
- nf_tables: honor set timeout and garbage collection updates
- ipset: fix hash:net,port,net hang with /0 subnet
- ipset: avoid hung task warning when adding/deleting entries
- selftests: net:
- fix cmsg_so_mark.sh test hang on non-x86 systems
- fix the arp_ndisc_evict_nocarrier test for IPv6
- usb: rndis_host: secure rndis_query check against int overflow
- eth: r8169: fix dmar pte write access during suspend/resume with
WOL
- eth: lan966x: fix configuration of the PCS
- eth: sparx5: fix reading of the MAC address
- eth: qed: allow sleep in qed_mcp_trace_dump()
- eth: hns3:
- fix interrupts re-initialization after VF FLR
- fix handling of promisc when MAC addr table gets full
- refine the handling for VF heartbeat
- eth: mlx5:
- properly handle ingress QinQ-tagged packets on VST
- fix io_eq_size and event_eq_size params validation on big endian
- fix RoCE setting at HCA level if not supported at all
- don't turn CQE compression on by default for IPoIB
- eth: ena:
- fix toeplitz initial hash key value
- account for the number of XDP-processed bytes in interface stats
- fix rx_copybreak value update
Misc:
- ethtool: harden phy stat handling against buggy drivers
- docs: netdev: convert maintainer's doc from FAQ to a normal
document"
* tag 'net-6.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (112 commits)
caif: fix memory leak in cfctrl_linkup_request()
inet: control sockets should not use current thread task_frag
net/ulp: prevent ULP without clone op from entering the LISTEN status
qed: allow sleep in qed_mcp_trace_dump()
MAINTAINERS: Update maintainers for ptp_vmw driver
usb: rndis_host: Secure rndis_query check against int overflow
net: dpaa: Fix dtsec check for PCS availability
octeontx2-pf: Fix lmtst ID used in aura free
drivers/net/bonding/bond_3ad: return when there's no aggregator
netfilter: ipset: Rework long task execution when adding/deleting entries
netfilter: ipset: fix hash:net,port,net hang with /0 subnet
net: sparx5: Fix reading of the MAC address
vxlan: Fix memory leaks in error path
net: sched: htb: fix htb_classify() kernel-doc
net: sched: cbq: dont intepret cls results when asked to drop
net: sched: atm: dont intepret cls results when asked to drop
dt-bindings: net: marvell,orion-mdio: Fix examples
dt-bindings: net: sun8i-emac: Add phy-supply property
net: ipa: use proper endpoint mask for suspend
selftests: net: return non-zero for failures reported in arp_ndisc_evict_nocarrier
...
We missed the window between the TIF flag update and the next reschedule.
Signed-off-by: Rodrigo Branco <bsdaemon@google.com>
Reviewed-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: <stable@vger.kernel.org>
Both <linux/mmiotrace.h> and <asm/insn-eval.h> define various MMIO_ enum constants,
whose namespace overlaps.
Rename the <asm/insn-eval.h> ones to have a INSN_ prefix, so that the headers can be
used from the same source file.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20230101162910.710293-2-Jason@zx2c4.com
After
b3e34a47f989 ("x86/kexec: fix memory leak of elf header buffer"),
freeing image->elf_headers in the error path of crash_load_segments()
is not needed because kimage_file_post_load_cleanup() will take
care of that later. And not clearing it could result in a double-free.
Drop the superfluous vfree() call at the error path of
crash_load_segments().
Fixes: b3e34a47f989 ("x86/kexec: fix memory leak of elf header buffer")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Baoquan He <bhe@redhat.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@kernel.org>
Link: https://lore.kernel.org/r/20221122115122.13937-1-tiwai@suse.de
- Fix a use-after-free on the perf syscall's error path
- A potential integer overflow fix in amd_core_pmu_init()
- Fix the cgroup events tracking after the context handling rewrite
- Return the proper value from the inherit_event() function on error
-----BEGIN PGP SIGNATURE-----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=M9iU
-----END PGP SIGNATURE-----
Merge tag 'perf_urgent_for_v6.2_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Borislav Petkov:
- Pass only an initialized perf event attribute to the LSM hook
- Fix a use-after-free on the perf syscall's error path
- A potential integer overflow fix in amd_core_pmu_init()
- Fix the cgroup events tracking after the context handling rewrite
- Return the proper value from the inherit_event() function on error
* tag 'perf_urgent_for_v6.2_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/core: Call LSM hook after copying perf_event_attr
perf: Fix use-after-free in error path
perf/x86/amd: fix potential integer overflow on shift of a int
perf/core: Fix cgroup events tracking
perf core: Return error pointer if inherit_event() fails to find pmu_ctx
functionality like the rethunks and not only kgdb
- Remove __init section markings of two functions which are referenced by a
function in the .text section
-----BEGIN PGP SIGNATURE-----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=ZQnP
-----END PGP SIGNATURE-----
Merge tag 'x86_urgent_for_v6.2_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- Two fixes to correct how kprobes handles INT3 now that they're added
by other functionality like the rethunks and not only kgdb
- Remove __init section markings of two functions which are referenced
by a function in the .text section
* tag 'x86_urgent_for_v6.2_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/kprobes: Fix optprobe optimization check with CONFIG_RETHUNK
x86/kprobes: Fix kprobes instruction boudary check with CONFIG_RETHUNK
x86/calldepth: Fix incorrect init section references
x86:
* several fixes to nested VMX execution controls
* fixes and clarification to the documentation for Xen emulation
* do not unnecessarily release a pmu event with zero period
* MMU fixes
* fix Coverity warning in kvm_hv_flush_tlb()
selftests:
* fixes for the ucall mechanism in selftests
* other fixes mostly related to compilation with clang
While KVM_XEN_EVTCHN_RESET is usually called with no vCPUs running,
if that happened it could cause a deadlock. This is due to
kvm_xen_eventfd_reset() doing a synchronize_srcu() inside
a kvm->lock critical section.
To avoid this, first collect all the evtchnfd objects in an
array and free all of them once the kvm->lock critical section
is over and th SRCU grace period has expired.
Reported-by: Michal Luczaj <mhal@rbox.co>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Since the CONFIG_RETHUNK and CONFIG_SLS will use INT3 for stopping
speculative execution after function return, kprobe jump optimization
always fails on the functions with such INT3 inside the function body.
(It already checks the INT3 padding between functions, but not inside
the function)
To avoid this issue, as same as kprobes, check whether the INT3 comes
from kgdb or not, and if so, stop decoding and make it fail. The other
INT3 will come from CONFIG_RETHUNK/CONFIG_SLS and those can be
treated as a one-byte instruction.
Fixes: e463a09af2f0 ("x86: Add straight-line-speculation mitigation")
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/167146051929.1374301.7419382929328081706.stgit@devnote3
Since the CONFIG_RETHUNK and CONFIG_SLS will use INT3 for stopping
speculative execution after RET instruction, kprobes always failes to
check the probed instruction boundary by decoding the function body if
the probed address is after such sequence. (Note that some conditional
code blocks will be placed after function return, if compiler decides
it is not on the hot path.)
This is because kprobes expects kgdb puts the INT3 as a software
breakpoint and it will replace the original instruction.
But these INT3 are not such purpose, it doesn't need to recover the
original instruction.
To avoid this issue, kprobes checks whether the INT3 is owned by
kgdb or not, and if so, stop decoding and make it fail. The other
INT3 will come from CONFIG_RETHUNK/CONFIG_SLS and those can be
treated as a one-byte instruction.
Fixes: e463a09af2f0 ("x86: Add straight-line-speculation mitigation")
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/167146051026.1374301.392728975473572291.stgit@devnote3
The addition of callthunks_translate_call_dest means that
skip_addr() and patch_dest() can no longer be discarded
as part of the __init section freeing:
WARNING: modpost: vmlinux.o: section mismatch in reference: callthunks_translate_call_dest.cold (section: .text.unlikely) -> skip_addr (section: .init.text)
WARNING: modpost: vmlinux.o: section mismatch in reference: callthunks_translate_call_dest.cold (section: .text.unlikely) -> patch_dest (section: .init.text)
WARNING: modpost: vmlinux.o: section mismatch in reference: is_callthunk.cold (section: .text.unlikely) -> skip_addr (section: .init.text)
ERROR: modpost: Section mismatches detected.
Set CONFIG_SECTION_MISMATCH_WARN_ONLY=y to allow them.
Fixes: b2e9dfe54be4 ("x86/bpf: Emit call depth accounting if required")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20221215164334.968863-1-arnd@kernel.org
The left shift of int 32 bit integer constant 1 is evaluated using 32 bit
arithmetic and then passed as a 64 bit function argument. In the case where
i is 32 or more this can lead to an overflow. Avoid this by shifting
using the BIT_ULL macro instead.
Fixes: 471af006a747 ("perf/x86/amd: Constrain Large Increment per Cycle events")
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Ian Rogers <irogers@google.com>
Acked-by: Kim Phillips <kim.phillips@amd.com>
Link: https://lore.kernel.org/r/20221202135149.1797974-1-colin.i.king@gmail.com
These are (uint64_t)-1 magic values are a userspace ABI, allowing the
shared info pages and other enlightenments to be disabled. This isn't
a Xen ABI because Xen doesn't let the guest turn these off except with
the full SHUTDOWN_soft_reset mechanism. Under KVM, the userspace VMM is
expected to handle soft reset, and tear down the kernel parts of the
enlightenments accordingly.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Message-Id: <20221226120320.1125390-5-dwmw2@infradead.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Port number is validated in kvm_xen_setattr_evtchn().
Remove superfluous checks in kvm_xen_eventfd_assign() and
kvm_xen_eventfd_update().
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Message-Id: <20221222203021.1944101-3-mhal@rbox.co>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Message-Id: <20221226120320.1125390-4-dwmw2@infradead.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The evtchnfd structure itself must be protected by either kvm->lock or
SRCU. Use the former in kvm_xen_eventfd_update(), since the lock is
being taken anyway; kvm_xen_hcall_evtchn_send() instead is a reader and
does not need kvm->lock, and is called in SRCU critical section from the
kvm_x86_handle_exit function.
It is also important to use rcu_read_{lock,unlock}() in
kvm_xen_hcall_evtchn_send(), because idr_remove() will *not*
use synchronize_srcu() to wait for readers to complete.
Remove a superfluous if (kvm) check before calling synchronize_srcu()
in kvm_xen_eventfd_deassign() where kvm has been dereferenced already.
Co-developed-by: Michal Luczaj <mhal@rbox.co>
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Message-Id: <20221226120320.1125390-3-dwmw2@infradead.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In particular, we shouldn't assume that being contiguous in guest virtual
address space means being contiguous in guest *physical* address space.
In dropping the manual calls to kvm_mmu_gva_to_gpa_system(), also drop
the srcu_read_lock() that was around them. All call sites are reached
from kvm_xen_hypercall() which is called from the handle_exit function
with the read lock already held.
536395260 ("KVM: x86/xen: handle PV timers oneshot mode")
1a65105a5 ("KVM: x86/xen: handle PV spinlocks slowpath")
Fixes: 2fd6df2f2 ("KVM: x86/xen: intercept EVTCHNOP_send from guests")
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Message-Id: <20221226120320.1125390-2-dwmw2@infradead.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Due to several bugs caused by timers being re-armed after they are
shutdown and just before they are freed, a new state of timers was added
called "shutdown". After a timer is set to this state, then it can no
longer be re-armed.
The following script was run to find all the trivial locations where
del_timer() or del_timer_sync() is called in the same function that the
object holding the timer is freed. It also ignores any locations where
the timer->function is modified between the del_timer*() and the free(),
as that is not considered a "trivial" case.
This was created by using a coccinelle script and the following
commands:
$ cat timer.cocci
@@
expression ptr, slab;
identifier timer, rfield;
@@
(
- del_timer(&ptr->timer);
+ timer_shutdown(&ptr->timer);
|
- del_timer_sync(&ptr->timer);
+ timer_shutdown_sync(&ptr->timer);
)
... when strict
when != ptr->timer
(
kfree_rcu(ptr, rfield);
|
kmem_cache_free(slab, ptr);
|
kfree(ptr);
)
$ spatch timer.cocci . > /tmp/t.patch
$ patch -p1 < /tmp/t.patch
Link: https://lore.kernel.org/lkml/20221123201306.823305113@linutronix.de/
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Acked-by: Pavel Machek <pavel@ucw.cz> [ LED ]
Acked-by: Kalle Valo <kvalo@kernel.org> [ wireless ]
Acked-by: Paolo Abeni <pabeni@redhat.com> [ networking ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Re-check sp->nx_huge_page_disallowed under the tdp_mmu_pages_lock spinlock
when adding a new shadow page in the TDP MMU. To ensure the NX reclaim
kthread can't see a not-yet-linked shadow page, the page fault path links
the new page table prior to adding the page to possible_nx_huge_pages.
If the page is zapped by different task, e.g. because dirty logging is
disabled, between linking the page and adding it to the list, KVM can end
up triggering use-after-free by adding the zapped SP to the aforementioned
list, as the zapped SP's memory is scheduled for removal via RCU callback.
The bug is detected by the sanity checks guarded by CONFIG_DEBUG_LIST=y,
i.e. the below splat is just one possible signature.
------------[ cut here ]------------
list_add corruption. prev->next should be next (ffffc9000071fa70), but was ffff88811125ee38. (prev=ffff88811125ee38).
WARNING: CPU: 1 PID: 953 at lib/list_debug.c:30 __list_add_valid+0x79/0xa0
Modules linked in: kvm_intel
CPU: 1 PID: 953 Comm: nx_huge_pages_t Tainted: G W 6.1.0-rc4+ #71
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
RIP: 0010:__list_add_valid+0x79/0xa0
RSP: 0018:ffffc900006efb68 EFLAGS: 00010286
RAX: 0000000000000000 RBX: ffff888116cae8a0 RCX: 0000000000000027
RDX: 0000000000000027 RSI: 0000000100001872 RDI: ffff888277c5b4c8
RBP: ffffc90000717000 R08: ffff888277c5b4c0 R09: ffffc900006efa08
R10: 0000000000199998 R11: 0000000000199a20 R12: ffff888116cae930
R13: ffff88811125ee38 R14: ffffc9000071fa70 R15: ffff88810b794f90
FS: 00007fc0415d2740(0000) GS:ffff888277c40000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 0000000115201006 CR4: 0000000000172ea0
Call Trace:
<TASK>
track_possible_nx_huge_page+0x53/0x80
kvm_tdp_mmu_map+0x242/0x2c0
kvm_tdp_page_fault+0x10c/0x130
kvm_mmu_page_fault+0x103/0x680
vmx_handle_exit+0x132/0x5a0 [kvm_intel]
vcpu_enter_guest+0x60c/0x16f0
kvm_arch_vcpu_ioctl_run+0x1e2/0x9d0
kvm_vcpu_ioctl+0x271/0x660
__x64_sys_ioctl+0x80/0xb0
do_syscall_64+0x2b/0x50
entry_SYSCALL_64_after_hwframe+0x46/0xb0
</TASK>
---[ end trace 0000000000000000 ]---
Fixes: 61f94478547b ("KVM: x86/mmu: Set disallowed_nx_huge_page in TDP MMU before setting SPTE")
Reported-by: Greg Thelen <gthelen@google.com>
Analyzed-by: David Matlack <dmatlack@google.com>
Cc: David Matlack <dmatlack@google.com>
Cc: Ben Gardon <bgardon@google.com>
Cc: Mingwei Zhang <mizhang@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20221213033030.83345-4-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Map the leaf SPTE when handling a TDP MMU page fault if and only if the
target level is reached. A recent commit reworked the retry logic and
incorrectly assumed that walking SPTEs would never "fail", as the loop
either bails (retries) or installs parent SPs. However, the iterator
itself will bail early if it detects a frozen (REMOVED) SPTE when
stepping down. The TDP iterator also rereads the current SPTE before
stepping down specifically to avoid walking into a part of the tree that
is being removed, which means it's possible to terminate the loop without
the guts of the loop observing the frozen SPTE, e.g. if a different task
zaps a parent SPTE between the initial read and try_step_down()'s refresh.
Mapping a leaf SPTE at the wrong level results in all kinds of badness as
page table walkers interpret the SPTE as a page table, not a leaf, and
walk into the weeds.
------------[ cut here ]------------
WARNING: CPU: 1 PID: 1025 at arch/x86/kvm/mmu/tdp_mmu.c:1070 kvm_tdp_mmu_map+0x481/0x510
Modules linked in: kvm_intel
CPU: 1 PID: 1025 Comm: nx_huge_pages_t Tainted: G W 6.1.0-rc4+ #64
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
RIP: 0010:kvm_tdp_mmu_map+0x481/0x510
RSP: 0018:ffffc9000072fba8 EFLAGS: 00010286
RAX: 0000000000000000 RBX: ffffc9000072fcc0 RCX: 0000000000000027
RDX: 0000000000000027 RSI: 00000000ffffdfff RDI: ffff888277c5b4c8
RBP: ffff888107d45a10 R08: ffff888277c5b4c0 R09: ffffc9000072fa48
R10: 0000000000000001 R11: 0000000000000001 R12: ffffc9000073a0e0
R13: ffff88810fc54800 R14: ffff888107d1ae60 R15: ffff88810fc54f90
FS: 00007fba9f853740(0000) GS:ffff888277c40000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 000000010aa7a003 CR4: 0000000000172ea0
Call Trace:
<TASK>
kvm_tdp_page_fault+0x10c/0x130
kvm_mmu_page_fault+0x103/0x680
vmx_handle_exit+0x132/0x5a0 [kvm_intel]
vcpu_enter_guest+0x60c/0x16f0
kvm_arch_vcpu_ioctl_run+0x1e2/0x9d0
kvm_vcpu_ioctl+0x271/0x660
__x64_sys_ioctl+0x80/0xb0
do_syscall_64+0x2b/0x50
entry_SYSCALL_64_after_hwframe+0x46/0xb0
</TASK>
---[ end trace 0000000000000000 ]---
Invalid SPTE change: cannot replace a present leaf
SPTE with another present leaf SPTE mapping a
different PFN!
as_id: 0 gfn: 100200 old_spte: 600000112400bf3 new_spte: 6000001126009f3 level: 2
------------[ cut here ]------------
kernel BUG at arch/x86/kvm/mmu/tdp_mmu.c:559!
invalid opcode: 0000 [#1] SMP
CPU: 1 PID: 1025 Comm: nx_huge_pages_t Tainted: G W 6.1.0-rc4+ #64
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
RIP: 0010:__handle_changed_spte.cold+0x95/0x9c
RSP: 0018:ffffc9000072faf8 EFLAGS: 00010246
RAX: 00000000000000c1 RBX: ffffc90000731000 RCX: 0000000000000027
RDX: 0000000000000000 RSI: 00000000ffffdfff RDI: ffff888277c5b4c8
RBP: 0600000112400bf3 R08: ffff888277c5b4c0 R09: ffffc9000072f9a0
R10: 0000000000000001 R11: 0000000000000001 R12: 06000001126009f3
R13: 0000000000000002 R14: 0000000012600901 R15: 0000000012400b01
FS: 00007fba9f853740(0000) GS:ffff888277c40000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 000000010aa7a003 CR4: 0000000000172ea0
Call Trace:
<TASK>
kvm_tdp_mmu_map+0x3b0/0x510
kvm_tdp_page_fault+0x10c/0x130
kvm_mmu_page_fault+0x103/0x680
vmx_handle_exit+0x132/0x5a0 [kvm_intel]
vcpu_enter_guest+0x60c/0x16f0
kvm_arch_vcpu_ioctl_run+0x1e2/0x9d0
kvm_vcpu_ioctl+0x271/0x660
__x64_sys_ioctl+0x80/0xb0
do_syscall_64+0x2b/0x50
entry_SYSCALL_64_after_hwframe+0x46/0xb0
</TASK>
Modules linked in: kvm_intel
---[ end trace 0000000000000000 ]---
Fixes: 63d28a25e04c ("KVM: x86/mmu: simplify kvm_tdp_mmu_map flow when guest has to retry")
Cc: Robert Hoo <robert.hu@linux.intel.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20221213033030.83345-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When stuffing the allowed secondary execution controls for nested VMX in
response to CPUID updates, don't set the allowed-1 bit for a feature that
isn't supported by KVM, i.e. isn't allowed by the canonical vmcs_config.
WARN if KVM attempts to manipulate a feature that isn't supported. All
features that are currently stuffed are always advertised to L1 for
nested VMX if they are supported in KVM's base configuration, and no
additional features should ever be added to the CPUID-induced stuffing
(updating VMX MSRs in response to CPUID updates is a long-standing KVM
flaw that is slowly being fixed).
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20221213062306.667649-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Set ENABLE_USR_WAIT_PAUSE in KVM's supported VMX MSR configuration if the
feature is supported in hardware and enabled in KVM's base, non-nested
configuration, i.e. expose ENABLE_USR_WAIT_PAUSE to L1 if it's supported.
This fixes a bug where saving/restoring, i.e. migrating, a vCPU will fail
if WAITPKG (the associated CPUID feature) is enabled for the vCPU, and
obviously allows L1 to enable the feature for L2.
KVM already effectively exposes ENABLE_USR_WAIT_PAUSE to L1 by stuffing
the allowed-1 control ina vCPU's virtual MSR_IA32_VMX_PROCBASED_CTLS2 when
updating secondary controls in response to KVM_SET_CPUID(2), but (a) that
depends on flawed code (KVM shouldn't touch VMX MSRs in response to CPUID
updates) and (b) runs afoul of vmx_restore_control_msr()'s restriction
that the guest value must be a strict subset of the supported host value.
Although no past commit explicitly enabled nested support for WAITPKG,
doing so is safe and functionally correct from an architectural
perspective as no additional KVM support is needed to virtualize TPAUSE,
UMONITOR, and UMWAIT for L2 relative to L1, and KVM already forwards
VM-Exits to L1 as necessary (commit bf653b78f960, "KVM: vmx: Introduce
handle_unexpected_vmexit and handle WAITPKG vmexit").
Note, KVM always keeps the hosts MSR_IA32_UMWAIT_CONTROL resident in
hardware, i.e. always runs both L1 and L2 with the host's power management
settings for TPAUSE and UMWAIT. See commit bf09fb6cba4f ("KVM: VMX: Stop
context switching MSR_IA32_UMWAIT_CONTROL") for more details.
Fixes: e69e72faa3a0 ("KVM: x86: Add support for user wait instructions")
Cc: stable@vger.kernel.org
Reported-by: Aaron Lewis <aaronlewis@google.com>
Reported-by: Yu Zhang <yu.c.zhang@linux.intel.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Message-Id: <20221213062306.667649-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Explicitly drop the result of kvm_vcpu_write_guest() when writing the
"launch state" as part of VMCLEAR emulation, and add a comment to call
out that KVM's behavior is architecturally valid. Intel's pseudocode
effectively says that VMCLEAR is a nop if the target VMCS address isn't
in memory, e.g. if the address points at MMIO.
Add a FIXME to call out that suppressing failures on __copy_to_user() is
wrong, as memory (a memslot) does exist in that case. Punt the issue to
the future as open coding kvm_vcpu_write_guest() just to make sure the
guest dies with -EFAULT isn't worth the extra complexity. The flaw will
need to be addressed if KVM ever does something intelligent on uaccess
failures, e.g. to support post-copy demand paging, but in that case KVM
will need a more thorough overhaul, i.e. VMCLEAR shouldn't need to open
code a core KVM helper.
No functional change intended.
Reported-by: coverity-bot <keescook+coverity-bot@chromium.org>
Addresses-Coverity-ID: 1527765 ("Error handling issues")
Fixes: 587d7e72aedc ("kvm: nVMX: VMCLEAR should not cause the vCPU to shut down")
Cc: Jim Mattson <jmattson@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20221220154224.526568-1-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a sanity check in kvm_handle_memory_failure() to assert that a valid
x86_exception structure is provided if the memory "failure" wants to
propagate a fault into the guest. If a memory failure happens during a
direct guest physical memory access, e.g. for nested VMX, KVM hardcodes
the failure to X86EMUL_IO_NEEDED and doesn't provide an exception pointer
(because the exception struct would just be filled with garbage).
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20221220153427.514032-1-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
kvm_apic_hw_enabled() only needs to return bool, there is no place
to use the return value of MSR_IA32_APICBASE_ENABLE.
Signed-off-by: Peng Hao <flyingpeng@tencent.com>
Message-Id: <CAPm50aJ=BLXNWT11+j36Dd6d7nz2JmOBk4u7o_NPQ0N61ODu1g@mail.gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In kvm_hv_flush_tlb(), 'data_offset' and 'consumed_xmm_halves' variables
are used in a mutually exclusive way: in 'hc->fast' we count in 'XMM
halves' and increase 'data_offset' otherwise. Coverity discovered, that in
one case both variables are incremented unconditionally. This doesn't seem
to cause any issues as the only user of 'data_offset'/'consumed_xmm_halves'
data is kvm_hv_get_tlb_flush_entries() -> kvm_hv_get_hc_data() which also
takes into account 'hc->fast' but is still worth fixing.
To make things explicit, put 'data_offset' and 'consumed_xmm_halves' to
'struct kvm_hv_hcall' as a union and use at call sites. This allows to
remove explicit 'data_offset'/'consumed_xmm_halves' parameters from
kvm_hv_get_hc_data()/kvm_get_sparse_vp_set()/kvm_hv_get_tlb_flush_entries()
helpers.
Note: 'struct kvm_hv_hcall' is allocated on stack in kvm_hv_hypercall() and
is not zeroed, consumers are supposed to initialize the appropriate field
if needed.
Reported-by: coverity-bot <keescook+coverity-bot@chromium.org>
Addresses-Coverity-ID: 1527764 ("Uninitialized variables")
Fixes: 260970862c88 ("KVM: x86: hyper-v: Handle HVCALL_FLUSH_VIRTUAL_ADDRESS_LIST{,EX} calls gently")
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20221208102700.959630-1-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When scanning userspace I/OAPIC entries, intercept EOI for level-triggered
IRQs if the current vCPU has a pending and/or in-service IRQ for the
vector in its local API, even if the vCPU doesn't match the new entry's
destination. This fixes a race between userspace I/OAPIC reconfiguration
and IRQ delivery that results in the vector's bit being left set in the
remote IRR due to the eventual EOI not being forwarded to the userspace
I/OAPIC.
Commit 0fc5a36dd6b3 ("KVM: x86: ioapic: Fix level-triggered EOI and IOAPIC
reconfigure race") fixed the in-kernel IOAPIC, but not the userspace
IOAPIC configuration, which has a similar race.
Fixes: 0fc5a36dd6b3 ("KVM: x86: ioapic: Fix level-triggered EOI and IOAPIC reconfigure race")
Signed-off-by: Adamos Ttofari <attofari@amazon.de>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20221208094415.12723-1-attofari@amazon.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The current vPMU can reuse the same pmc->perf_event for the same
hardware event via pmc_pause/resume_counter(), but this optimization
does not apply to a portion of the TSX events (e.g., "event=0x3c,in_tx=1,
in_tx_cp=1"), where event->attr.sample_period is legally zero at creation,
thus making the perf call to perf_event_period() meaningless (no need to
adjust sample period in this case), and instead causing such reusable
perf_events to be repeatedly released and created.
Avoid releasing zero sample_period events by checking is_sampling_event()
to follow the previously enable/disable optimization.
Signed-off-by: Like Xu <likexu@tencent.com>
Message-Id: <20221207071506.15733-2-likexu@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There aren't enough resources to run these ports at 10G speeds. Disable
10G for these ports, reverting to the previous speed.
Fixes: 36926a7d70c2 ("powerpc: dts: t208x: Mark MAC1 and MAC2 as 10G")
Reported-by: Camelia Alexandra Groza <camelia.groza@nxp.com>
Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Reviewed-by: Camelia Groza <camelia.groza@nxp.com>
Tested-by: Camelia Groza <camelia.groza@nxp.com>
Link: https://lore.kernel.org/r/20221216172937.2960054-1-sean.anderson@seco.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* Allow unloading KVM module
* Allow KVM user-space to set mvendorid, marchid, and mimpid
* Several fixes and cleanups
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmOhy+QUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroOdUwf+K3i8RHW1H8TF/JSrn1I6nURNLYhb
2wXzl3esOsfswtn6dxEvLEXivcKmD2G9bLpa2UIa3vw1Plg9tdce9IJ5qDodtxVL
mlISMUSgMNy+lelKJiG+l5Ld4oJ4HUY0yw/p3Ml9WUpra98UCB0sJ+FsqXr4ndi9
LxkQJrNyZkQcRH2IXjQhKjdjkepFTmkhKs/uCxAZvW9zfUmGX0dcp9W22PTbsapQ
IcaBKdVaNN3TXNSIdDCM2Iv+oBN7gJn1CbgFxhkp4L8eE5PvRjFw0QooFMn2TjDw
VflP3gIs/41+5tnoPWXGAkKFe/Z5aJjGjx6Yx0WnEEgoAG47RUHYsKIUjw==
=8ejV
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull RISC-V kvm updates from Paolo Bonzini:
- Allow unloading KVM module
- Allow KVM user-space to set mvendorid, marchid, and mimpid
- Several fixes and cleanups
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
RISC-V: KVM: Add ONE_REG interface for mvendorid, marchid, and mimpid
RISC-V: KVM: Save mvendorid, marchid, and mimpid when creating VCPU
RISC-V: Export sbi_get_mvendorid() and friends
RISC-V: KVM: Move sbi related struct and functions to kvm_vcpu_sbi.h
RISC-V: KVM: Use switch-case in kvm_riscv_vcpu_set/get_reg()
RISC-V: KVM: Remove redundant includes of asm/csr.h
RISC-V: KVM: Remove redundant includes of asm/kvm_vcpu_timer.h
RISC-V: KVM: Fix reg_val check in kvm_riscv_vcpu_set_reg_config()
RISC-V: KVM: Simplify kvm_arch_prepare_memory_region()
RISC-V: KVM: Exit run-loop immediately if xfer_to_guest fails
RISC-V: KVM: use vma_lookup() instead of find_vma_intersection()
RISC-V: KVM: Add exit logic to main.c
rproc-virtio device names are now auto generated, to avoid conflicts
between remoteproc instances.
The imx_rproc driver is extended with support for communicating with and
attaching to a running M4 on i.MX8QXP, as well as support for
attaching to the M4 after self-recovering from a crash. Support is
added for i.MX8QM and mailbox channels are reconnected during the
recovery process, in order to avoid data corruption.
The Xilinx Zynqmp firmware interface is extended and support for the
Xilinx R5 RPU is introduced.
Various resources leaks, primarily in error paths, throughout the
Qualcomm drivers are corrected.
Lastly a fix to ensure that pm_relax is invoked even if the remoteproc
instance is stopped between a crash is being reported and the recovery
handler is scheduled.
-----BEGIN PGP SIGNATURE-----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=sO5/
-----END PGP SIGNATURE-----
Merge tag 'rproc-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux
Pull remoteproc updates from Bjorn Andersson:
"rproc-virtio device names are now auto generated, to avoid conflicts
between remoteproc instances.
The imx_rproc driver is extended with support for communicating with
and attaching to a running M4 on i.MX8QXP, as well as support for
attaching to the M4 after self-recovering from a crash. Support is
added for i.MX8QM and mailbox channels are reconnected during the
recovery process, in order to avoid data corruption.
The Xilinx Zynqmp firmware interface is extended and support for the
Xilinx R5 RPU is introduced.
Various resources leaks, primarily in error paths, throughout the
Qualcomm drivers are corrected.
Lastly a fix to ensure that pm_relax is invoked even if the remoteproc
instance is stopped between a crash is being reported and the recovery
handler is scheduled"
* tag 'rproc-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux: (25 commits)
remoteproc: core: Do pm_relax when in RPROC_OFFLINE state
remoteproc: qcom: q6v5: Fix missing clk_disable_unprepare() in q6v5_wcss_qcs404_power_on()
remoteproc: qcom_q6v5_pas: Fix missing of_node_put() in adsp_alloc_memory_region()
remoteproc: qcom_q6v5_pas: detach power domains on remove
remoteproc: qcom_q6v5_pas: disable wakeup on probe fail or remove
remoteproc: qcom: q6v5: Fix potential null-ptr-deref in q6v5_wcss_init_mmio()
remoteproc: sysmon: fix memory leak in qcom_add_sysmon_subdev()
remoteproc: sysmon: Make QMI message rules const
drivers: remoteproc: Add Xilinx r5 remoteproc driver
firmware: xilinx: Add RPU configuration APIs
firmware: xilinx: Add shutdown/wakeup APIs
firmware: xilinx: Add ZynqMP firmware ioctl enums for RPU configuration.
arm64: dts: xilinx: zynqmp: Add RPU subsystem device node
dt-bindings: remoteproc: Add Xilinx RPU subsystem bindings
remoteproc: core: Use device_match_of_node()
remoteproc: imx_rproc: Correct i.MX93 DRAM mapping
remoteproc: imx_rproc: Enable attach recovery for i.MX8QM/QXP
remoteproc: imx_rproc: Request mbox channel later
remoteproc: imx_rproc: Support i.MX8QM
remoteproc: imx_rproc: Support kicking Mcore from Linux for i.MX8QXP
...
The m68 hand-written assembler version of strcmp() has always been
broken: it returns the difference between the first non-matching byte
done as a 8-bit subtraction.
That is _almost_ right, but is broken for the overflow case. The
strcmp() function should indeed return the sign of the difference
between the first byte that differs, but the subtraction needs to be
done in a wider type than 'char'. Otherwise the ordering isn't actually
stable.
This went unnoticed for basically forever, because nobody ever cares
about non-US-ASCII orderings in the kernel (in fact, most users only
care about "exact match or not"), so overflows don't really happen in
practice, even if it was very very wrong.
But that mostly unnoticeable bug becomes very noticeable by the recent
change to make 'char' be unsigned in the kernel across all architectures
(commit 3bc753c06dd0: "kbuild: treat char as always unsigned"). Because
the code not only did the subtraction in the wrong type width, it also
used 'char' to then make the compiler expand the result from an 8-bit
difference to the 'int' return value.
So now with an unsigned char that incorrect arithmetic width was then
not even sign-expanded, and always returned just a positive integer.
We could re-instate the old broken code by just turning the 'char' into
'signed char' as has been done elsewhere where people depended on the
signedness of 'char', but since the whole function was broken to begin
with, and we have a non-broken default fallback implementation, let's
just remove this broken function entirely.
Reported-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/lkml/20221221145332.GA2399037@roeck-us.net/
Cc: Jason Donenfeld <Jason@zx2c4.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-----BEGIN PGP SIGNATURE-----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=IBNq
-----END PGP SIGNATURE-----
Merge tag 'random-6.2-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random
Pull more random number generator updates from Jason Donenfeld:
"Two remaining changes that are now possible after you merged a few
other trees:
- #include <asm/archrandom.h> can be removed from random.h now,
making the direct use of the arch_random_* API more of a private
implementation detail between the archs and random.c, rather than
something for general consumers.
- Two additional uses of prandom_u32_max() snuck in during the
initial phase of pulls, so these have been converted to
get_random_u32_below(), and now the deprecated prandom_u32_max()
alias -- which was just a wrapper around get_random_u32_below() --
can be removed.
In addition, there is one fix:
- Check efi_rt_services_supported() before attempting to use an EFI
runtime function.
This affected EFI systems that disable runtime services yet still
boot via EFI (e.g. the reporter's Lenovo Thinkpad X13s laptop), as
well systems where EFI runtime services have been forcibly
disabled, such as on PREEMPT_RT.
On those machines, a very early and hard to diagnose crash would
happen, preventing boot"
* tag 'random-6.2-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random:
prandom: remove prandom_u32_max()
efi: random: fix NULL-deref when refreshing seed
random: do not include <asm/archrandom.h> from random.h
Commit 38a8553b0a22 ("clk: ralink: make system controller node a reset provider")
make system controller a reset provider for mt7621 ralink SoCs. Ralink init code
also tries to start previous common reset controller which at the end tries to
find device tree node 'ralink,rt2880-reset'. mt7621 device tree file is not
using at all this node anymore. Hence avoid to init this common reset controller
for mt7621 ralink SoCs to avoid 'Failed to find reset controller node' boot
error trace error.
Fixes: 64b2d6ffff86 ("staging: mt7621-dts: align resets with binding documentation")
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Fixes include:
. use strscpy() instead of strncpy() for cmdline setup
-----BEGIN PGP SIGNATURE-----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=7enN
-----END PGP SIGNATURE-----
Merge tag 'm68knommu-for-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu
Pull m68knommu update from Greg Ungerer:
"Only a single change to use the safer strscpy() instead of strncpy()
when setting up the cmdline"
* tag 'm68knommu-for-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
m68k: use strscpy() to instead of strncpy()
Fixes:
- Fix potential null-ptr-deref in start_task()
- Fix kgdb console on serial port
- Add missing FORCE prerequisites in Makefile
- Drop PMD_SHIFT from calculation in pgtable.h
Enhancements:
- Implement a wrapper to align madvise() MADV_* constants with other
architectures
- If machine supports running MPE/XL, show the MPE model string
Cleanups:
- Drop duplicate kgdb console code
- Indenting fixes in setup_cmdline()
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCY6B/cgAKCRD3ErUQojoP
X85pAQCC6YpSYON3KZRfABeiDTRCKcGm72p7JQRnyj88XCq6ZAEA40T2qpRpjoYi
NaXr28mxHFYh4Z0c5Y7K5EuFTT7gAA4=
=e2Jd
-----END PGP SIGNATURE-----
Merge tag 'parisc-for-6.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc updates from Helge Deller:
"There is one noteable patch, which allows the parisc kernel to use the
same MADV_xxx constants as the other architectures going forward. With
that change only alpha has one entry left (MADV_DONTNEED is 6 vs 4 on
others) which is different. To prevent an ABI breakage, a wrapper is
included which translates old MADV values to the new ones, so existing
userspace isn't affected. Reason for that patch is, that some
applications wrongly used the standard MADV_xxx values even on some
non-x86 platforms and as such those programs failed to run correctly
on parisc (examples are qemu-user, tor browser and boringssl).
Then the kgdb console and the LED code received some fixes, and some
0-day warnings are now gone. Finally, the very last compile warning
which was visible during a kernel build is now fixed too (in the vDSO
code).
The majority of the patches are tagged for stable series and in
summary this patchset is quite small and drops more code than it adds:
Fixes:
- Fix potential null-ptr-deref in start_task()
- Fix kgdb console on serial port
- Add missing FORCE prerequisites in Makefile
- Drop PMD_SHIFT from calculation in pgtable.h
Enhancements:
- Implement a wrapper to align madvise() MADV_* constants with other
architectures
- If machine supports running MPE/XL, show the MPE model string
Cleanups:
- Drop duplicate kgdb console code
- Indenting fixes in setup_cmdline()"
* tag 'parisc-for-6.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Show MPE/iX model string at bootup
parisc: Add missing FORCE prerequisites in Makefile
parisc: Move pdc_result struct to firmware.c
parisc: Drop locking in pdc console code
parisc: Drop duplicate kgdb_pdc console
parisc: Fix locking in pdc_iodc_print() firmware call
parisc: Drop PMD_SHIFT from calculation in pgtable.h
parisc: Align parisc MADV_XXX constants with all other architectures
parisc: led: Fix potential null-ptr-deref in start_task()
parisc: Fix inconsistent indenting in setup_cmdline()
Convert the final two users of prandom_u32_max() that slipped in during
6.2-rc1 to use get_random_u32_below().
Then, with no more users left, we can finally remove the deprecated
function.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
The <asm/archrandom.h> header is a random.c private detail, not
something to be called by other code. As such, don't make it
automatically available by way of random.h.
Cc: Michael Ellerman <mpe@ellerman.id.au>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
These are a couple of build fixes from randconfig testing,
plus a set of Mediatek SoC specific fixes, all trivial.
-----BEGIN PGP SIGNATURE-----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=qUCm
-----END PGP SIGNATURE-----
Merge tag 'soc-fixes-6.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"These are a couple of build fixes from randconfig testing, plus a set
of Mediatek SoC specific fixes, all trivial"
* tag 'soc-fixes-6.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
soc: tegra: fix CPU_BIG_ENDIAN dependencies
ARM: disallow pre-ARMv5 builds with ld.lld
ARM: pxa: fix building with clang
MAINTAINERS: add related dts to IXP4xx
ARM: dts: spear: drop 0x from unit address
arm64: dts: mt8183: Fix Mali GPU clock
arm64: dts: mediatek: mt8195-demo: fix the memory size of node secmon
soc: mediatek: pm-domains: Fix the power glitch issue
- Support zstd-compressed debug info
- Allow W=1 builds to detect objects shared among multiple modules
- Add srcrpm-pkg target to generate a source RPM package
- Make the -s option detection work for future GNU Make versions
- Add -Werror to KBUILD_CPPFLAGS when CONFIG_WERROR=y
- Allow W=1 builds to detect -Wundef warnings in any preprocessed files
- Raise the minimum supported version of binutils to 2.25
- Use $(intcmp ...) to compare integers if GNU Make >= 4.4 is used
- Use $(file ...) to read a file if GNU Make >= 4.2 is used
- Print error if GNU Make older than 3.82 is used
- Allow modpost to detect section mismatches with Clang LTO
- Include vmlinuz.efi into kernel tarballs for arm64 CONFIG_EFI_ZBOOT=y
-----BEGIN PGP SIGNATURE-----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=Ig/Y
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Support zstd-compressed debug info
- Allow W=1 builds to detect objects shared among multiple modules
- Add srcrpm-pkg target to generate a source RPM package
- Make the -s option detection work for future GNU Make versions
- Add -Werror to KBUILD_CPPFLAGS when CONFIG_WERROR=y
- Allow W=1 builds to detect -Wundef warnings in any preprocessed files
- Raise the minimum supported version of binutils to 2.25
- Use $(intcmp ...) to compare integers if GNU Make >= 4.4 is used
- Use $(file ...) to read a file if GNU Make >= 4.2 is used
- Print error if GNU Make older than 3.82 is used
- Allow modpost to detect section mismatches with Clang LTO
- Include vmlinuz.efi into kernel tarballs for arm64 CONFIG_EFI_ZBOOT=y
* tag 'kbuild-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (29 commits)
buildtar: fix tarballs with EFI_ZBOOT enabled
modpost: Include '.text.*' in TEXT_SECTIONS
padata: Mark padata_work_init() as __ref
kbuild: ensure Make >= 3.82 is used
kbuild: refactor the prerequisites of the modpost rule
kbuild: change module.order to list *.o instead of *.ko
kbuild: use .NOTINTERMEDIATE for future GNU Make versions
kconfig: refactor Makefile to reduce process forks
kbuild: add read-file macro
kbuild: do not sort after reading modules.order
kbuild: add test-{ge,gt,le,lt} macros
Documentation: raise minimum supported version of binutils to 2.25
kbuild: add -Wundef to KBUILD_CPPFLAGS for W=1 builds
kbuild: move -Werror from KBUILD_CFLAGS to KBUILD_CPPFLAGS
kbuild: Port silent mode detection to future gnu make.
init/version.c: remove #include <generated/utsrelease.h>
firmware_loader: remove #include <generated/utsrelease.h>
modpost: Mark uuid_le type to be suitable only for MEI
kbuild: add ability to make source rpm buildable using koji
kbuild: warn objects shared among multiple modules
...
The integrated assembler in clang does not understand the xscale
specific mra/mar instructions:
arch/arm/mach-pxa/pxa27x.c:136:15: error: unsupported architectural extension: xscale
asm volatile(".arch_extension xscale\n\t"
arch/arm/mach-pxa/pxa27x.c:136:40: error: invalid instruction, did you mean: mcr, mla, mrc, mrs, msr?
mra r2, r3, acc0
Since these are coprocessor features, the same can be expressed using
mrrc/mcrr, so use that for builds with IAS.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20221215162529.3659187-1-arnd@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
