Fixes and new HW support:
- amd/pmc: Match IRQ1 wakeup disable with the enable on i8042 side
- intel: power-domains: Clearwater Forest support
- intel/pmc: Skip SSRAM setup when no additional devices are present
- ISST: Clearwater Forest support
The following is an automated shortlog grouped by driver:
amd/pmc:
- Only disable IRQ1 wakeup where i8042 actually enabled it
intel/pmc:
- Fix ioremap() of bad address
intel: power-domains:
- Add Clearwater Forest support
ISST:
- Add Clearwater Forest to support list
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSCSUwRdwTNL2MhaBlZrE9hU+XOMQUCZ4EthAAKCRBZrE9hU+XO
MY3zAPsEwcPckYuK5vuh3Q3S52VpZnJnErzvEPCgoL6gh0mMrgEArnzvAjfoFxYf
xk1Bp9HpoiZNesNO9vWUO7AEm3gTiww=
=txVF
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v6.13-5' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Ilpo Järvinen:
"Fixes and new HW support:
- amd/pmc: Match IRQ1 wakeup disable with the enable on i8042 side
- intel: power-domains: Clearwater Forest support
- intel/pmc: Skip SSRAM setup when no additional devices are present
- ISST: Clearwater Forest support"
* tag 'platform-drivers-x86-v6.13-5' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: intel/pmc: Fix ioremap() of bad address
platform/x86: ISST: Add Clearwater Forest to support list
platform/x86/intel: power-domains: Add Clearwater Forest support
platform/x86/amd/pmc: Only disable IRQ1 wakeup where i8042 actually enabled it
SMN access was bolted into amd_nb mostly as convenience. This has
limitations though that require incurring tech debt to keep it working.
Move SMN access to the newly introduced AMD Node driver.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> # pdx86
Acked-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> # PMF, PMC
Link: https://lore.kernel.org/r/20241206161210.163701-11-yazen.ghannam@amd.com
In pmc_core_ssram_get_pmc(), the physical addresses for hidden SSRAM
devices are retrieved from the MMIO region of the primary SSRAM device.
If additional devices are not present, the address returned is zero.
Currently, the code does not check for this condition, resulting in
ioremap() incorrectly attempting to map address 0.
Add a check for a zero address and return 0 if no additional devices
are found, as it is not an error for the device to be absent.
Fixes: a01486dc4bb1 ("platform/x86/intel/pmc: Cleanup SSRAM discovery")
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Link: https://lore.kernel.org/r/20250106174653.1497128-1-david.e.box@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Add Clearwater Forest (INTEL_ATOM_DARKMONT_X) to SST support list by
adding to isst_cpu_ids.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://lore.kernel.org/r/20250103155255.1488139-2-srinivas.pandruvada@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Add Clearwater Forest support (INTEL_ATOM_DARKMONT_X) to tpmi_cpu_ids
to support domaid id mappings.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://lore.kernel.org/r/20250103155255.1488139-1-srinivas.pandruvada@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Wakeup for IRQ1 should be disabled only in cases where i8042 had
actually enabled it, otherwise "wake_depth" for this IRQ will try to
drop below zero and there will be an unpleasant WARN() logged:
kernel: atkbd serio0: Disabling IRQ1 wakeup source to avoid platform firmware bug
kernel: ------------[ cut here ]------------
kernel: Unbalanced IRQ 1 wake disable
kernel: WARNING: CPU: 10 PID: 6431 at kernel/irq/manage.c:920 irq_set_irq_wake+0x147/0x1a0
The PMC driver uses DEFINE_SIMPLE_DEV_PM_OPS() to define its dev_pm_ops
which sets amd_pmc_suspend_handler() to the .suspend, .freeze, and
.poweroff handlers. i8042_pm_suspend(), however, is only set as
the .suspend handler.
Fix the issue by call PMC suspend handler only from the same set of
dev_pm_ops handlers as i8042_pm_suspend(), which currently means just
the .suspend handler.
To reproduce this issue try hibernating (S4) the machine after a fresh boot
without putting it into s2idle first.
Fixes: 8e60615e8932 ("platform/x86/amd: pmc: Disable IRQ1 wakeup for RN/CZN")
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name>
Link: https://lore.kernel.org/r/c8f28c002ca3c66fbeeb850904a1f43118e17200.1736184606.git.mail@maciej.szmigiero.name
[ij: edited the commit message.]
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Fixes and new HW support:
- hp-wmi: Add HP OMEN 8 to thermal profile list and use timer quirk
- mlx-platform: Fix PCI device refcount leaks
- thinkpad-acpi: Support a new platform profile toggle hotkey
The following is an automated shortlog grouped by driver:
hp-wmi:
- mark 8A15 board for timed OMEN thermal profile
mlx-platform:
- call pci_dev_put() to balance the refcount
thinkpad-acpi:
- Add support for hotkey 0x1401
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSCSUwRdwTNL2MhaBlZrE9hU+XOMQUCZ3LkMAAKCRBZrE9hU+XO
MYibAQCuGx8LrrUNL6dyiQgAMsEbHCK2HmmmS7VyiKBGW6cLPgD/aVGPJ/rmsIe9
BjKm/HzwPzbaND4Ru0QWnAd+1hRDRwE=
=mWbU
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v6.13-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform drivers fixes from Ilpo Järvinen:
"hp-wmi:
- mark 8A15 board for timed OMEN thermal profile
mlx-platform:
- call pci_dev_put() to balance the refcount
thinkpad-acpi:
- Add support for hotkey 0x1401"
* tag 'platform-drivers-x86-v6.13-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: thinkpad-acpi: Add support for hotkey 0x1401
platform/x86: hp-wmi: mark 8A15 board for timed OMEN thermal profile
platform/x86: mlx-platform: call pci_dev_put() to balance the refcount
F8 mode key on Lenovo 2025 platforms use a different key code.
Adding support for the new keycode 0x1401.
Tested on X1 Carbon Gen 13 and X1 2-in-1 Gen 10.
Signed-off-by: Vishnu Sankar <vishnuocv@gmail.com>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Link: https://lore.kernel.org/r/20241227231840.21334-1-vishnuocv@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The HP OMEN 8 (2022), corresponding to a board ID of 8A15, supports OMEN
thermal profile and requires the timed profile quirk.
Upon adding this ID to both the omen_thermal_profile_boards and
omen_timed_thermal_profile_boards, significant bump in performance can be
observed. For instance, SilverBench (https://silver.urih.com/) results
improved from ~56,000 to ~69,000, as a result of higher power draws (and
thus core frequencies) whilst under load:
Package Power:
- Before the patch: ~65W (dropping to about 55W under sustained load).
- After the patch: ~115W (dropping to about 105W under sustained load).
Core Power:
- Before: ~60W (ditto above).
- After: ~108W (ditto above).
Add 8A15 to omen_thermal_profile_boards and
omen_timed_thermal_profile_boards to improve performance.
Signed-off-by: Xi Xiao <1577912515@qq.com>
Signed-off-by: Mingcong Bai <jeffbai@aosc.io>
Link: https://lore.kernel.org/r/20241226062207.3352629-1-jeffbai@aosc.io
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Unbreak ACPI EC support on LoongArch that has been broken earlier
in this development cycle (Huacai Chen).
-----BEGIN PGP SIGNATURE-----
iQJGBAABCAAwFiEE4fcc61cGeeHD/fCwgsRv/nhiVHEFAmdl1b8SHHJqd0Byand5
c29ja2kubmV0AAoJEILEb/54YlRxT1wQAKhMdsDLrhVL+lxccFXZEc6tNQYz7T2h
NMlFBet2gYLX5W65163YDDVqSsUMHMQVxDrzXUW7ZUfc+zatXnOXB3Qn3u9+5XPG
hjEBjVjOgPGwizmtJc+oyPqkdzBfeFHwGXCq1APCkCwi4Oc2NhuRs49hVw53LTfh
G5Dtsx3UrC8HBT1r5M5lJ3st6F4z+a+LCa5SRgDp5FIhgtFikwcxq4YxjXmTp8fq
Gl4uaqwKv3SKRYxqOsY1Tp9sEAOyQViQ3pLSetXrj+Y58Vc4laSf+4fJzrDLJcfy
+zwClWzRL7T7l9z9jWeguaZoJtafhcd1GIiZb1DurBdtlCy74dUBq0Go746Di+6K
7dzMgjk4SOAGMv4IwkdhlSlPXqHqGSuev+WNDYggtNV3/CnAfGNJWQtIyG8XmC+n
6s/GgaODU30pqakZATLcCPBcuMfmDc43ywl9JbEl5nufK+COCb1tnzuVgFzyfERY
IEA/RYEvx7dw9AorPeMZuq6FdCMkrGDPx0PZkRF5S5GE/zDEdEIC2WlfGi8geCn6
SffX0ijqWI8tIU8fBtYIJ0VzKrmRXHbKB1MhraiamcLNpAquqlKwqT9iuR/bXWuf
lj6GCaRvZph+hrSP7A2mzeLpGYoubvORpPMfAV3YlXsHKeFKmxnW1iAO2Hym9box
wcWGi2FM/Yfe
=o1pK
-----END PGP SIGNATURE-----
Merge tag 'acpi-6.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fix from Rafael Wysocki:
"Unbreak ACPI EC support on LoongArch that has been broken earlier in
this development cycle (Huacai Chen)"
* tag 'acpi-6.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: EC: Enable EC support on LoongArch by default
Commit a6021aa24f6417416d933 ("ACPI: EC: make EC support compile-time
conditional") only enable ACPI_EC on X86 by default, but the embedded
controller is also widely used on LoongArch laptops so we also enable
ACPI_EC for LoongArch.
The laptop driver cannot work without EC, so also update the dependency
of LOONGSON_LAPTOP to let it depend on APCI_EC.
Fixes: a6021aa24f6417416d933 ("ACPI: EC: make EC support compile-time conditional")
Reported-by: Xiaotian Wu <wuxiaotian@loongson.cn>
Tested-by: Binbin Zhou <zhoubinbin@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Link: https://patch.msgid.link/20241217073704.3339587-1-chenhuacai@loongson.cn
[ rjw: Added Fixes: ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
mlxplat_pci_fpga_device_init() calls pci_get_device() but does not
release the refcount on error path. Call pci_dev_put() on the error path
and in mlxplat_pci_fpga_device_exit() to fix this.
This bug was found by an experimental static analysis tool that I am
developing.
Fixes: 02daa222fbdd ("platform: mellanox: Add initial support for PCIe based programming logic device")
Signed-off-by: Joe Hattori <joe@pf.is.s.u-tokyo.ac.jp>
Reviewed-by: Vadim Pasternak <vadimp@nvidia.com>
Link: https://lore.kernel.org/r/20241216022538.381209-1-joe@pf.is.s.u-tokyo.ac.jp
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Fixes and new HW support:
- alienware-wmi: Add support for Alienware m16 R1 AMD.
- alienware-wmi: Do not setup legacy LED control with X and G Series.
- intel/ifs: Clearwater Forest support.
- intel/vsec: Panther Lake support.
- p2sb: Do not hide the device if BIOS left it unhidden.
- touchscreen_dmi: Add SARY Tab 3 tablet information.
The following is an automated shortlog grouped by driver:
alienware-wmi:
- Adds support to Alienware m16 R1 AMD
- Fix X Series and G Series quirks
intel/ifs:
- Add Clearwater Forest to CPU support list
intel/vsec:
- Add support for Panther Lake
p2sb:
- Do not scan and remove the P2SB device when it is unhidden
- Factor out p2sb_read_from_cache()
- Introduce the global flag p2sb_hidden_by_bios
- Move P2SB hide and unhide code to p2sb_scan_and_cache()
touchscreen_dmi:
- Add info for SARY Tab 3 tablet
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSCSUwRdwTNL2MhaBlZrE9hU+XOMQUCZ2BF8wAKCRBZrE9hU+XO
Mbg6AQDjQpJpnKfHqindXx7JSr9uzjLq7CeDmjX/q6gZ8fJ3LgD+LxvbJLxAeNX8
4sOcyxlGTyoxdeW6MqIFnDWcd24qiQs=
=4DMQ
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v6.13-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Ilpo Järvinen:
- alienware-wmi:
- Add support for Alienware m16 R1 AMD
- Do not setup legacy LED control with X and G Series
- intel/ifs: Clearwater Forest support
- intel/vsec: Panther Lake support
- p2sb: Do not hide the device if BIOS left it unhidden
- touchscreen_dmi: Add SARY Tab 3 tablet information
* tag 'platform-drivers-x86-v6.13-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86/intel/vsec: Add support for Panther Lake
platform/x86/intel/ifs: Add Clearwater Forest to CPU support list
platform/x86: touchscreen_dmi: Add info for SARY Tab 3 tablet
p2sb: Do not scan and remove the P2SB device when it is unhidden
p2sb: Move P2SB hide and unhide code to p2sb_scan_and_cache()
p2sb: Introduce the global flag p2sb_hidden_by_bios
p2sb: Factor out p2sb_read_from_cache()
alienware-wmi: Adds support to Alienware m16 R1 AMD
alienware-wmi: Fix X Series and G Series quirks
Add Clearwater Forest (INTEL_ATOM_DARKMONT_X) to the x86 match table of
Intel In Field Scan (IFS) driver, enabling IFS functionality on this
processor.
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
Link: https://lore.kernel.org/r/20241210203152.1136463-1-jithu.joseph@intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
There's no info about the OEM behind the tablet, only online stores
listing. This tablet uses an Intel Atom x5-Z8300, 4GB of RAM & 64GB
of storage.
Signed-off-by: Huy Minh <buingoc67@gmail.com>
Link: https://lore.kernel.org/r/20241210154500.32124-1-buingoc67@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
When drivers access P2SB device resources, it calls p2sb_bar(). Before
the commit 5913320eb0b3 ("platform/x86: p2sb: Allow p2sb_bar() calls
during PCI device probe"), p2sb_bar() obtained the resources and then
called pci_stop_and_remove_bus_device() for clean up. Then the P2SB
device disappeared. The commit 5913320eb0b3 introduced the P2SB device
resource cache feature in the boot process. During the resource cache,
pci_stop_and_remove_bus_device() is called for the P2SB device, then the
P2SB device disappears regardless of whether p2sb_bar() is called or
not. Such P2SB device disappearance caused a confusion [1]. To avoid the
confusion, avoid the pci_stop_and_remove_bus_device() call when the BIOS
does not hide the P2SB device.
For that purpose, cache the P2SB device resources only if the BIOS hides
the P2SB device. Call p2sb_scan_and_cache() only if p2sb_hidden_by_bios
is true. This allows removing two branches from p2sb_scan_and_cache().
When p2sb_bar() is called, get the resources from the cache if the P2SB
device is hidden. Otherwise, read the resources from the unhidden P2SB
device.
Reported-by: Daniel Walker (danielwa) <danielwa@cisco.com>
Closes: https://lore.kernel.org/lkml/ZzTI+biIUTvFT6NC@goliath/ [1]
Fixes: 5913320eb0b3 ("platform/x86: p2sb: Allow p2sb_bar() calls during PCI device probe")
Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20241128002836.373745-5-shinichiro.kawasaki@wdc.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
To prepare for the following fix, move the code to hide and unhide the
P2SB device from p2sb_cache_resources() to p2sb_scan_and_cache().
Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20241128002836.373745-4-shinichiro.kawasaki@wdc.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
To prepare for the following fix, introduce the global flag
p2sb_hidden_by_bios. Check if the BIOS hides the P2SB device and store
the result in the flag. This allows to refer to the check result across
functions.
Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20241128002836.373745-3-shinichiro.kawasaki@wdc.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
To prepare for the following fix, factor out the code to read the P2SB
resource from the cache to the new function p2sb_read_from_cache().
Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20241128002836.373745-2-shinichiro.kawasaki@wdc.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Adds support to Alienware m16 R1 AMD.
Tested-by: Cihan Ozakca <cozakca@outlook.com>
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20241208003013.6490-3-kuurtb@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Devices that are known to support the WMI thermal interface do not
support the legacy LED control interface. Make `.num_zones = 0` and
avoid calling alienware_zone_init() if that's the case.
Fixes: 9f6c43041552 ("alienware-wmi: added platform profile support")
Fixes: 1c1eb70e7d23 ("alienware-wmi: extends the list of supported models")
Suggested-by: Armin Wolf <W_Armin@gmx.de>
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Link: https://lore.kernel.org/r/20241208002652.5885-4-kuurtb@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Fixes:
- asus-nb-wmi: Silence unknown event warning when charger is plugged in
- asus-wmi: Handle return code variations during thermal policy writing
graciously
- samsung-laptop: Correct module description
The following is an automated shortlog grouped by driver:
asus-nb-wmi:
- Ignore unknown event 0xCF
asus-wmi:
- Ignore return value when writing thermal policy
samsung-laptop:
- Match MODULE_DESCRIPTION() to functionality
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSCSUwRdwTNL2MhaBlZrE9hU+XOMQUCZ1BHIgAKCRBZrE9hU+XO
MYFkAQC0IAlh+vv8BUxsKgaikmbxwvhC8dIjDzMLqeQUnKTDmgD/ZaiKpwK508bN
SYrpL2CnVXFjX4ZAewZiewCVQdIbXAo=
=DOpQ
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v6.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Ilpo Järvinen:
- asus-nb-wmi: Silence unknown event warning when charger is plugged in
- asus-wmi: Handle return code variations during thermal policy writing
graciously
- samsung-laptop: Correct module description
* tag 'platform-drivers-x86-v6.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: asus-nb-wmi: Ignore unknown event 0xCF
platform/x86: asus-wmi: Ignore return value when writing thermal policy
platform/x86: samsung-laptop: Match MODULE_DESCRIPTION() to functionality
On the Asus X541UAK an unknown event 0xCF is emited when the charger
is plugged in. This is caused by the following AML code:
If (ACPS ())
{
ACPF = One
Local0 = 0x58
If (ATKP)
{
^^^^ATKD.IANE (0xCF)
}
}
Else
{
ACPF = Zero
Local0 = 0x57
}
Notify (AC0, 0x80) // Status Change
If (ATKP)
{
^^^^ATKD.IANE (Local0)
}
Sleep (0x64)
PNOT ()
Sleep (0x0A)
NBAT (0x80)
Ignore the 0xCF event to silence the unknown event warning.
Reported-by: Pau Espin Pedrol <pespin@espeweb.net>
Closes: https://lore.kernel.org/platform-driver-x86/54d4860b-ec9c-4992-acf6-db3f90388293@espeweb.net
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20241123224700.18530-1-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
On some machines like the ASUS Vivobook S14 writing the thermal policy
returns the currently writen thermal policy instead of an error code.
Ignore the return code to avoid falsely returning an error when the
thermal policy was written successfully.
Reported-by: auslands-kv@gmx.de
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219517
Fixes: 2daa86e78c49 ("platform/x86: asus_wmi: Support throttle thermal policy")
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20241124171941.29789-1-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The continual trickle of small conversion patches is grating on me, and
is really not helping. Just get rid of the 'remove_new' member
function, which is just an alias for the plain 'remove', and had a
comment to that effect:
/*
* .remove_new() is a relic from a prototype conversion of .remove().
* New drivers are supposed to implement .remove(). Once all drivers are
* converted to not use .remove_new any more, it will be dropped.
*/
This was just a tree-wide 'sed' script that replaced '.remove_new' with
'.remove', with some care taken to turn a subsequent tab into two tabs
to make things line up.
I did do some minimal manual whitespace adjustment for places that used
spaces to line things up.
Then I just removed the old (sic) .remove_new member function, and this
is the end result. No more unnecessary conversion noise.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
core: add of based component probing
Some devices are designed and manufactured with some components having
multiple drop-in replacement options. These components are often
connected to the mainboard via ribbon cables, having the same signals
and pin assignments across all options. These may include the display
panel and touchscreen on laptops and tablets, and the trackpad on
laptops. Sometimes which component option is used in a particular device
can be detected by some firmware provided identifier, other times that
information is not available, and the kernel has to try to probe each
device.
Instead of a delicate dance between drivers and device tree quirks, this
change introduces a simple I2C component probe function. For a given
class of devices on the same I2C bus, it will go through all of them,
doing a simple I2C read transfer and see which one of them responds. It
will then enable the device that responds.
-----BEGIN PGP SIGNATURE-----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=MAxU
-----END PGP SIGNATURE-----
Merge tag 'i2c-for-6.13-rc1-part3' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c component probing support from Wolfram Sang:
"Add OF component probing.
Some devices are designed and manufactured with some components having
multiple drop-in replacement options. These components are often
connected to the mainboard via ribbon cables, having the same signals
and pin assignments across all options. These may include the display
panel and touchscreen on laptops and tablets, and the trackpad on
laptops. Sometimes which component option is used in a particular
device can be detected by some firmware provided identifier, other
times that information is not available, and the kernel has to try to
probe each device.
Instead of a delicate dance between drivers and device tree quirks,
this change introduces a simple I2C component probe function. For a
given class of devices on the same I2C bus, it will go through all of
them, doing a simple I2C read transfer and see which one of them
responds. It will then enable the device that responds"
* tag 'i2c-for-6.13-rc1-part3' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
MAINTAINERS: fix typo in I2C OF COMPONENT PROBER
of: base: Document prefix argument for of_get_next_child_with_prefix()
i2c: Fix whitespace style issue
arm64: dts: mediatek: mt8173-elm-hana: Mark touchscreens and trackpads as fail
platform/chrome: Introduce device tree hardware prober
i2c: of-prober: Add GPIO support to simple helpers
i2c: of-prober: Add simple helpers for regulator support
i2c: Introduce OF component probe function
of: base: Add for_each_child_of_node_with_prefix()
of: dynamic: Add of_changeset_update_prop_string
Here is the "big and hairy" char/misc/iio and other small driver
subsystem updates for 6.13-rc1. Sorry for doing this at the end of the
merge window, conference and holiday travel got in the way on my side
(hence the 5am pull request emails...)
Loads of things in here, and even a fun merge conflict!
- rust misc driver bindings and other rust changes to make misc
drivers actually possible. I think this is the tipping point,
expect to see way more rust drivers going forward now that these
bindings are present. Next merge window hopefully we will have pci
and platform drivers working, which will fully enable almost all
driver subsystems to start accepting (or at least getting) rust
drivers. This is the end result of a lot of work from a lot of
people, congrats to all of them for getting this far, you've proved
many of us wrong in the best way possible, working code :)
- IIO driver updates, too many to list individually, that subsystem
keeps growing and growing...
- Interconnect driver updates
- nvmem driver updates
- pwm driver updates
- platform_driver::remove() fixups, loads of them
- counter driver updates
- misc driver updates (keba?)
- binder driver updates and fixes
- loads of other small char/misc/etc driver updates and additions,
full details in the shortlog.
Note, there is a semi-hairy rust merge conflict when pulling this. The
resolution has been in linux-next for a while and can be seen here:
https://lore.kernel.org/all/20241111173459.2646d4af@canb.auug.org.au/
All of these have been in linux-next for a while, with no other reported
issues other than that merge conflict.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZ0lGpg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykKHQCgvI4Muu2tpdINBVe24Zc8S3ozg0AAnRNg3F7r
ikneftUDYtuviSGU/Rs8
=CW+i
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc/IIO/whatever driver subsystem updates from Greg KH:
"Here is the 'big and hairy' char/misc/iio and other small driver
subsystem updates for 6.13-rc1.
Loads of things in here, and even a fun merge conflict!
- rust misc driver bindings and other rust changes to make misc
drivers actually possible.
I think this is the tipping point, expect to see way more rust
drivers going forward now that these bindings are present. Next
merge window hopefully we will have pci and platform drivers
working, which will fully enable almost all driver subsystems to
start accepting (or at least getting) rust drivers.
This is the end result of a lot of work from a lot of people,
congrats to all of them for getting this far, you've proved many of
us wrong in the best way possible, working code :)
- IIO driver updates, too many to list individually, that subsystem
keeps growing and growing...
- Interconnect driver updates
- nvmem driver updates
- pwm driver updates
- platform_driver::remove() fixups, loads of them
- counter driver updates
- misc driver updates (keba?)
- binder driver updates and fixes
- loads of other small char/misc/etc driver updates and additions,
full details in the shortlog.
All of these have been in linux-next for a while, with no other
reported issues other than that merge conflict"
* tag 'char-misc-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (401 commits)
mei: vsc: Fix typo "maintstepping" -> "mainstepping"
firmware: Switch back to struct platform_driver::remove()
misc: isl29020: Fix the wrong format specifier
scripts/tags.sh: Don't tag usages of DEFINE_MUTEX
fpga: Switch back to struct platform_driver::remove()
mei: vsc: Improve error logging in vsc_identify_silicon()
mei: vsc: Do not re-enable interrupt from vsc_tp_reset()
dt-bindings: spmi: qcom,x1e80100-spmi-pmic-arb: Add SAR2130P compatible
dt-bindings: spmi: spmi-mtk-pmif: Add compatible for MT8188
spmi: pmic-arb: fix return path in for_each_available_child_of_node()
iio: Move __private marking before struct element priv in struct iio_dev
docs: iio: ad7380: add adaq4370-4 and adaq4380-4
iio: adc: ad7380: add support for adaq4370-4 and adaq4380-4
iio: adc: ad7380: use local dev variable to shorten long lines
iio: adc: ad7380: fix oversampling formula
dt-bindings: iio: adc: ad7380: add adaq4370-4 and adaq4380-4 compatible parts
bus: mhi: host: pci_generic: Use pcim_iomap_region() to request and map MHI BAR
bus: mhi: host: Switch trace_mhi_gen_tre fields to native endian
misc: atmel-ssc: Use of_property_present() for non-boolean properties
misc: keba: Add hardware dependency
...
Here is a small set of driver core changes for 6.13-rc1.
Nothing major for this merge cycle, except for the 2 simple merge
conflicts are here just to make life interesting.
Included in here are:
- sysfs core changes and preparations for more sysfs api cleanups that
can come through all driver trees after -rc1 is out
- fw_devlink fixes based on many reports and debugging sessions
- list_for_each_reverse() removal, no one was using it!
- last-minute seq_printf() format string bug found and fixed in many
drivers all at once.
- minor bugfixes and changes full details in the shortlog
As mentioned above, there is 2 merge conflicts with your tree, one is
where the file is removed (easy enough to resolve), the second is a
build time error, that has been found in linux-next and the fix can be
seen here:
https://lore.kernel.org/r/20241107212645.41252436@canb.auug.org.au
Other than that, the changes here have been in linux-next with no other
reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZ0lEog8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ym+0ACgw6wN+LkLVIHWhxTq5DYHQ0QCxY8AoJrRIcKe
78h0+OU3OXhOy8JGz62W
=oI5S
-----END PGP SIGNATURE-----
Merge tag 'driver-core-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is a small set of driver core changes for 6.13-rc1.
Nothing major for this merge cycle, except for the two simple merge
conflicts are here just to make life interesting.
Included in here are:
- sysfs core changes and preparations for more sysfs api cleanups
that can come through all driver trees after -rc1 is out
- fw_devlink fixes based on many reports and debugging sessions
- list_for_each_reverse() removal, no one was using it!
- last-minute seq_printf() format string bug found and fixed in many
drivers all at once.
- minor bugfixes and changes full details in the shortlog"
* tag 'driver-core-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (35 commits)
Fix a potential abuse of seq_printf() format string in drivers
cpu: Remove spurious NULL in attribute_group definition
s390/con3215: Remove spurious NULL in attribute_group definition
perf: arm-ni: Remove spurious NULL in attribute_group definition
driver core: Constify bin_attribute definitions
sysfs: attribute_group: allow registration of const bin_attribute
firmware_loader: Fix possible resource leak in fw_log_firmware_info()
drivers: core: fw_devlink: Fix excess parameter description in docstring
driver core: class: Correct WARN() message in APIs class_(for_each|find)_device()
cacheinfo: Use of_property_present() for non-boolean properties
cdx: Fix cdx_mmap_resource() after constifying attr in ->mmap()
drivers: core: fw_devlink: Make the error message a bit more useful
phy: tegra: xusb: Set fwnode for xusb port devices
drm: display: Set fwnode for aux bus devices
driver core: fw_devlink: Stop trying to optimize cycle detection logic
driver core: Constify attribute arguments of binary attributes
sysfs: bin_attribute: add const read/write callback variants
sysfs: implement all BIN_ATTR_* macros in terms of __BIN_ATTR()
sysfs: treewide: constify attribute callback of bin_attribute::llseek()
sysfs: treewide: constify attribute callback of bin_attribute::mmap()
...
Some devices are designed and manufactured with some components having
multiple drop-in replacement options. These components are often
connected to the mainboard via ribbon cables, having the same signals
and pin assignments across all options. These may include the display
panel and touchscreen on laptops and tablets, and the trackpad on
laptops. Sometimes which component option is used in a particular device
can be detected by some firmware provided identifier, other times that
information is not available, and the kernel has to try to probe each
device.
This change attempts to make the "probe each device" case cleaner. The
current approach is to have all options added and enabled in the device
tree. The kernel would then bind each device and run each driver's probe
function. This works, but has been broken before due to the introduction
of asynchronous probing, causing multiple instances requesting "shared"
resources, such as pinmuxes, GPIO pins, interrupt lines, at the same
time, with only one instance succeeding. Work arounds for these include
moving the pinmux to the parent I2C controller, using GPIO hogs or
pinmux settings to keep the GPIO pins in some fixed configuration, and
requesting the interrupt line very late. Such configurations can be seen
on the MT8183 Krane Chromebook tablets, and the Qualcomm sc8280xp-based
Lenovo Thinkpad 13S.
Instead of this delicate dance between drivers and device tree quirks,
this change introduces a simple I2C component prober. For any given
class of devices on the same I2C bus, it will go through all of them,
doing a simple I2C read transfer and see which one of them responds.
It will then enable the device that responds.
This requires some minor modifications in the existing device tree.
The status for all the device nodes for the component options must be
set to "fail-needs-probe". This makes it clear that some mechanism is
needed to enable one of them, and also prevents the prober and device
drivers running at the same time.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Acked-by: Tzung-Bi Shih <tzungbi@kernel.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
- support for NT36672A touchscreen added to novatek-nvt-ts driver
- a change to ads7846 driver to prevent XPT2046 from locking up
- a change switching platform input dirves back to using remove() method
(from remove_new())
- updates to a number of input drivers to use the new cleanup facilities
(__free(...), guard(), and scoped-guard()) which ensure that the
resources and locks are released properly and automatically
- other assorted driver cleanups and fixes.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQST2eWILY88ieB2DOtAj56VGEWXnAUCZ0PQIAAKCRBAj56VGEWX
nDFFAQCSj3Va9Y6ZgNFvjmPAoA3RmsrvydXMG6PuyHEEfvTtpgD9GPldve3MRqRr
VcrLJXMgyX2+RgpKm1W9ZQgK9Nudegs=
=Ry7d
-----END PGP SIGNATURE-----
Merge tag 'input-for-v6.13-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov:
- support for NT36672A touchscreen added to novatek-nvt-ts driver
- a change to ads7846 driver to prevent XPT2046 from locking up
- a change switching platform input dirves back to using remove()
method (from remove_new())
- updates to a number of input drivers to use the new cleanup
facilities (__free(...), guard(), and scoped-guard()) which ensure
that the resources and locks are released properly and automatically
- other assorted driver cleanups and fixes.
* tag 'input-for-v6.13-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (109 commits)
Input: mpr121 - use devm_regulator_get_enable_read_voltage()
Input: sun4i-lradc-keys - don't include 'pm_wakeup.h' directly
Input: spear-keyboard - don't include 'pm_wakeup.h' directly
Input: cypress-sf - constify struct i2c_device_id
Input: ads7846 - increase xfer array size in 'struct ser_req'
Input: fix the input_event struct documentation
Input: i8042 - fix typo dublicate to duplicate
Input: ads7846 - add dummy command register clearing cycle
Input: cs40l50 - fix wrong usage of INIT_WORK()
Input: introduce notion of passive observers for input handlers
Input: maple_keyb - use guard notation when acquiring mutex
Input: locomokbd - use guard notation when acquiring spinlock
Input: hilkbd - use guard notation when acquiring spinlock
Input: synaptics-rmi4 - switch to using cleanup functions in F34
Input: synaptics - fix a typo
dt-bindings: input: rotary-encoder: Fix "rotary-encoder,rollover" type
Input: omap-keypad - use guard notation when acquiring mutex
Input: imagis - fix warning regarding 'imagis_3038_data' being unused
Input: userio - remove unneeded semicolon
Input: sparcspkr - use cleanup facility for device_node
...
tps65010, have undergone minor code improvements to enhance consistency and
fix race conditions.
- The syscon driver now utilizes the regmap max_register_is_0 capability
for consistent register map configuration across syscons of all sizes.
- New device support has been added for QCS8300, qcs615, SA8255p, and
samsung,s2dos05, expanding the range of compatible hardware.
- The cros_ec driver now supports loading cros_ec_ucsi on supported ECs
and avoids loading the charger with UCSI, streamlining functionality.
- The bd96801 driver now utilizes the more modern maple tree register
cache, improving performance.
- The da9052-spi driver has undergone a fix to change the read-mask to
write-mask, preventing potential issues.
- Unused declarations in max77693 have been removed, and support for
samsung,s2dos05 has been added, enhancing code clarity and device compatibility.
- Error handling in cs42l43 has been fixed to avoid unbalanced regulator
put and ensure proper synchronization during driver removal.
- The wcd934x driver now uses MODULE_DEVICE_TABLE() instead of
MODULE_ALIAS(), improving code consistency.
- Documentation for qcom,tcsr, syscon, and atmel-smc has been updated
and reorganized for better clarity and maintainability.
- The intel_soc_pmic_bxtwc driver has undergone significant improvements,
including the use of IRQ domains for various devices, fixing IRQ domain names
duplication, and code refactoring for better consistency and maintainability.
- The ipaq-micro driver has received a fix for a missing break statement in
the default case, enhancing code robustness.
- Support for the AXP323 PMIC has been added to the axp20x driver, along
with ensuring a clear relationship between IDs and model names, and allowing
multiple regulators, broadening hardware compatibility.
- The cs42l43 driver now disables IRQs during suspend for improved power
management.
- The adp5585 driver has reduced its dependencies by dropping the obsolete
dependency on COMPILE_TEST.
- Initial support for the MT6328 PMIC has been added to the mt6397 driver,
expanding the range of supported hardware.
- The rtc-bd70528 driver has been simplified by dropping the IC name from
IRQ, improving code readability.
- Documentation for qcom,spmi-pmic, ti,twl, and zii,rave-sp has been
updated to enhance clarity and incorporate new features.
- The rt5033 driver has received a fix for a missing regmap_del_irq_chip()
in the error handling path.
- New device support has been added for MSM8917, and the
intel_soc_pmic_crc driver now supports non-ACPI instantiated i2c_client.
- The 88pm886 driver has added support for the RTC cell, and the tqmx86
driver has improved its GPIO IRQ setup and added I2C IRQ support,
increasing functionality.
- The sprd,sc2731 DT schema has been updated and converted to YAML format
for better readability and maintainability.
-----BEGIN PGP SIGNATURE-----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=YP3r
-----END PGP SIGNATURE-----
Merge tag 'mfd-next-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
- Several drivers, including atmel-flexcom/rk8xx-core, palmas, and
tps65010, have undergone minor code improvements to enhance
consistency and fix race conditions.
- The syscon driver now utilizes the regmap max_register_is_0
capability for consistent register map configuration across syscons
of all sizes.
- New device support has been added for QCS8300, qcs615, SA8255p, and
samsung,s2dos05, expanding the range of compatible hardware.
- The cros_ec driver now supports loading cros_ec_ucsi on supported ECs
and avoids loading the charger with UCSI, streamlining functionality.
- The bd96801 driver now utilizes the more modern maple tree register
cache, improving performance.
- The da9052-spi driver has undergone a fix to change the read-mask to
write-mask, preventing potential issues.
- Unused declarations in max77693 have been removed, and support for
samsung,s2dos05 has been added, enhancing code clarity and device
compatibility.
- Error handling in cs42l43 has been fixed to avoid unbalanced
regulator put and ensure proper synchronization during driver
removal.
- The wcd934x driver now uses MODULE_DEVICE_TABLE() instead of
MODULE_ALIAS(), improving code consistency.
- Documentation for qcom,tcsr, syscon, and atmel-smc has been updated
and reorganized for better clarity and maintainability.
- The intel_soc_pmic_bxtwc driver has undergone significant
improvements, including the use of IRQ domains for various devices,
fixing IRQ domain names duplication, and code refactoring for better
consistency and maintainability.
- The ipaq-micro driver has received a fix for a missing break
statement in the default case, enhancing code robustness.
- Support for the AXP323 PMIC has been added to the axp20x driver,
along with ensuring a clear relationship between IDs and model names,
and allowing multiple regulators, broadening hardware compatibility.
- The cs42l43 driver now disables IRQs during suspend for improved
power management.
- The adp5585 driver has reduced its dependencies by dropping the
obsolete dependency on COMPILE_TEST.
- Initial support for the MT6328 PMIC has been added to the mt6397
driver, expanding the range of supported hardware.
- The rtc-bd70528 driver has been simplified by dropping the IC name
from IRQ, improving code readability.
- Documentation for qcom,spmi-pmic, ti,twl, and zii,rave-sp has been
updated to enhance clarity and incorporate new features.
- The rt5033 driver has received a fix for a missing
regmap_del_irq_chip() in the error handling path.
- New device support has been added for MSM8917, and the
intel_soc_pmic_crc driver now supports non-ACPI instantiated
i2c_client.
- The 88pm886 driver has added support for the RTC cell, and the tqmx86
driver has improved its GPIO IRQ setup and added I2C IRQ support,
increasing functionality.
- The sprd,sc2731 DT schema has been updated and converted to YAML
format for better readability and maintainability.
* tag 'mfd-next-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (62 commits)
dt-bindings: mfd: bd71828: Use charger resistor in mOhm instead of MOhm
dt-bindings: mfd: sprd,sc2731: Convert to YAML
mfd: tqmx86: Add I2C IRQ support
mfd: tqmx86: Make IRQ setup errors non-fatal
mfd: tqmx86: Refactor GPIO IRQ setup
mfd: tqmx86: Improve gpio_irq module parameter description
mfd: tqmx86: Add board definitions for TQMx120UC, TQMx130UC and TQMxE41S
mfd: 88pm886: Add the RTC cell
dt-bindings: mfd: Add Realtek RTL9300 switch peripherals
mfd: intel_soc_pmic_crc: Add support for non ACPI instantiated i2c_client
mfd: intel_soc_pmic_*: Consistently use filename as driver name
dt-bindings: mfd: qcom,tcsr: Add compatible for MSM8917
mfd: rt5033: Fix missing regmap_del_irq_chip()
mfd: cgbc-core: Fix error handling paths in cgbc_init_device()
dt-bindings: mfd: aspeed: Support for AST2700
mfd: Switch back to struct platform_driver::remove()
dt-bindings: mfd: qcom,spmi-pmic: Document PMICs added in SM8750
mfd: rtc: bd7xxxx Drop IC name from IRQ
mfd: mt6397: Add initial support for MT6328
mfd: adp5585: Drop obsolete dependency on COMPILE_TEST
...
Nothing particular important in the SoC driver updates, just the usual
improvements to for drivers/soc and a couple of subsystems that don't
fit anywhere else:
- The largest set of updates is for Qualcomm SoC drivers, extending the
set of supported features for additional SoCs in the QSEECOM, LLCC
and socinfo drivers.a
- The ti_sci firmware driver gains support for power managment
- The drivers/reset subsystem sees a rework of the microchip
sparx5 and amlogic reset drivers to support additional chips,
plus a few minor updates on other platforms
- The SCMI firmware interface driver gains support for two protocol
extensions, allowing more flexible use of the shared memory area
and new DT binding properties for configurability.
- Mediatek SoC drivers gain support for power managment on the MT8188
SoC and a new driver for DVFS.
- The AMD/Xilinx ZynqMP SoC drivers gain support for system reboot
and a few bugfixes
- The Hisilicon Kunpeng HCCS driver gains support for configuring
lanes through sysfs
Finally, there are cleanups and minor fixes for drivers/soc, drivers/bus,
and drivers/memory, including changing back the .remove_new callback
to .remove, as well as a few other updates for freescale (powerpc)
soc drivers, NXP i.MX soc drivers, cznic turris platform driver, memory
controller drviers, TI OMAP SoC drivers, and Tegra firmware drivers
-----BEGIN PGP SIGNATURE-----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=xeCE
-----END PGP SIGNATURE-----
Merge tag 'soc-drivers-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann:
"Nothing particular important in the SoC driver updates, just the usual
improvements to for drivers/soc and a couple of subsystems that don't
fit anywhere else:
- The largest set of updates is for Qualcomm SoC drivers, extending
the set of supported features for additional SoCs in the QSEECOM,
LLCC and socinfo drivers.a
- The ti_sci firmware driver gains support for power managment
- The drivers/reset subsystem sees a rework of the microchip sparx5
and amlogic reset drivers to support additional chips, plus a few
minor updates on other platforms
- The SCMI firmware interface driver gains support for two protocol
extensions, allowing more flexible use of the shared memory area
and new DT binding properties for configurability.
- Mediatek SoC drivers gain support for power managment on the MT8188
SoC and a new driver for DVFS.
- The AMD/Xilinx ZynqMP SoC drivers gain support for system reboot
and a few bugfixes
- The Hisilicon Kunpeng HCCS driver gains support for configuring
lanes through sysfs
Finally, there are cleanups and minor fixes for drivers/{soc, bus,
memory}, including changing back the .remove_new callback to .remove,
as well as a few other updates for freescale (powerpc) soc drivers,
NXP i.MX soc drivers, cznic turris platform driver, memory controller
drviers, TI OMAP SoC drivers, and Tegra firmware drivers"
* tag 'soc-drivers-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (116 commits)
soc: fsl: cpm1: qmc: Set the ret error code on platform_get_irq() failure
soc: fsl: rcpm: fix missing of_node_put() in copy_ippdexpcr1_setting()
soc: fsl: cpm1: tsa: switch to for_each_available_child_of_node_scoped()
platform: cznic: turris-omnia-mcu: Rename variable holding GPIO line names
platform: cznic: turris-omnia-mcu: Document the driver private data structure
firmware: turris-mox-rwtm: Document the driver private data structure
bus: Switch back to struct platform_driver::remove()
soc: qcom: ice: Remove the device_link field in qcom_ice
drm/msm/adreno: Setup SMMU aparture for per-process page table
firmware: qcom: scm: Introduce CP_SMMU_APERTURE_ID
firmware: arm_scpi: Check the DVFS OPP count returned by the firmware
soc: qcom: socinfo: add IPQ5424/IPQ5404 SoC ID
dt-bindings: arm: qcom,ids: add SoC ID for IPQ5424/IPQ5404
soc: qcom: llcc: Flip the manual slice configuration condition
dt-bindings: firmware: qcom,scm: Document sm8750 SCM
firmware: qcom: uefisecapp: Allow X1E Devkit devices
misc: lan966x_pci: Fix dtc warn 'Missing interrupt-parent'
misc: lan966x_pci: Fix dtc warns 'missing or empty reg/ranges property'
soc: qcom: llcc: Add LLCC configuration for the QCS8300 platform
dt-bindings: cache: qcom,llcc: Document the QCS8300 LLCC
...
Highlights:
- alienware-wmi: WMAX thermal interface support
- amd/hsmp: Split ACPI and platform device based drivers
- amd/x3d_vcache: X3D frequency/cache mode switching support
- asus-wmi: Thermal policy fixes
- intel/pmt: Disable C1 auto-demotion in suspend to allow
entering the deepest C-states
- intel-hid: Fix volume buttons on Thinkpad X12 Detachable
Tablet Gen 1
- intel_scu_ipc: Replace "workaround" with 32-bit IO
- panasonic-laptop: Correct *_show() function error handling
- p2sb: Gemini Lake P2SB devfn correction
- think-lmi: Admin/System certificate authentication support
- wmi: Disable WMI devices for shutdown, refactoring
continues
- x86-android-tablets: Vexia EDU ATLA 10 tablet support
- platform/surface: Surface Pro 9 5G (Arm/QCOM) support
- Miscellaneous cleanups / refactoring / improvements
Expected conflicts:
- hsmp driver split into two vs constifying bin_attribute [1]
[1] https://lore.kernel.org/all/20241107212645.41252436@canb.auug.org.au/
The following is an automated shortlog grouped by driver:
alienware-wmi:
- added force module parameters
- added platform profile support
- Adds support to Alienware x17 R2
- alienware_wmax_command() is now input size agnostic
- create_thermal_profile() no longer brute-forces IDs
- extends the list of supported models
- fixed indentation and clean up
- Fix spelling mistake "requieres" -> "requires"
- order alienware_quirks[] alphabetically
- WMAX interface documentation
amd: amd_3d_vcache:
- Add AMD 3D V-Cache optimizer driver
- Add sysfs ABI documentation
amd/hsmp:
- Add new error code and error logs
- Change generic plat_dev name to hsmp_pdev
- Change the error type
- Convert amd_hsmp_rdwr() to a function pointer
- Create hsmp/ directory
- Create separate ACPI, plat and common drivers
- Create wrapper function init_acpi()
- Make hsmp_pdev static instead of global
- mark hsmp_msg_desc_table[] as maybe_unused
- Move ACPI code to acpi.c
- Move platform device specific code to plat.c
- Move structure and macros to header file
- Use dev_groups in the driver structure
- Use name space while exporting module symbols
amd/pmf:
- Switch to platform_get_resource() and devm_ioremap_resource()
- Use dev_err_probe() to simplify error handling
asus-laptop:
- prefer strscpy() over strcpy()
asus-wmi:
- Fix inconsistent use of thermal policies
- Use platform_profile_cycle()
classmate-laptop:
- Replace snprintf in show functions with sysfs_emit
compal-laptop:
- use sysfs_emit() instead of sprintf()
dell-dcdbase:
- Replace snprintf in show functions with sysfs_emit
Documentation: alienware-wmi:
- Describe THERMAL_INFORMATION operation 0x02
eeepc-laptop:
- use sysfs_emit() instead of sprintf()
hp: hp-bioscfg:
- remove redundant if statement
intel:
- Add 'intel' prefix to the modules automatically
intel-hid:
- fix volume buttons on Thinkpad X12 Detachable Tablet Gen 1
intel/pmc:
- Disable C1 auto-demotion during suspend
- Refactor platform resume functions to use cnl_resume()
intel/pmt:
- allow user offset for PMT callbacks
- Correct the typo 'ACCCESS_LOCAL'
intel_scu_ipc:
- Convert to check for errors first
- Don't use "proxy" headers
- Replace workaround by 32-bit IO
- Save a copy of the entire struct intel_scu_ipc_data
- Simplify code with cleanup helpers
- Unify the flow in pwr_reg_rdwr()
intel/vsec:
- Remove a useless mutex
MAINTAINERS:
- adjust file entry in INTEL TPMI DRIVER
- Change AMD PMF driver status to "Supported"
- Update ISHTP ECLITE maintainer entry
p2sb:
- Cache correct PCI bar for P2SB on Gemini Lake
panasonic-laptop:
- Return errno correctly in show callback
surface: aggregator_registry:
- Add Surface Pro 9 5G
Switch back to struct platform_driver::
- remove()
think-lmi:
- Add certificate as mechanism
- Allow empty admin password
- improve check if BIOS account security enabled
- Multi-certificate support
wmi:
- Implement proper shutdown handling
- Introduce to_wmi_driver()
- Remove wmi_block_list
- Replace dev_to_wdev() with to_wmi_device()
x86: acer-wmi:
- remove unused macros
x86-android-tablets:
- Add get_i2c_adap_by_handle() helper
- Add support for getting i2c_adapter by PCI parent devname()
- Add support for Vexia EDU ATLA 10 tablet
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSCSUwRdwTNL2MhaBlZrE9hU+XOMQUCZz3IswAKCRBZrE9hU+XO
McdKAQCY9gIuqtHpYK0QIQYMoZOWhpiCzfZ96DDHqt4Wknh6NgD/YY6eESyDokyB
4BkujKwqo3cdGNPjIBy41jnNjekNsw8=
=QEd2
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v6.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver updates from Ilpo Järvinen:
- alienware WMAX thermal interface support
- Split ACPI and platform device based amd/hsmp drivers
- AMD X3D frequency/cache mode switching support
- asus thermal policy fixes
- Disable C1 auto-demotion in suspend to allow entering the deepest
C-states
- Fix volume buttons on Thinkpad X12 Detachable Tablet Gen 1
- Replace intel_scu_ipc "workaround" with 32-bit IO
- Correct *_show() function error handling in panasonic-laptop
- Gemini Lake P2SB devfn correction
- think-lmi Admin/System certificate authentication support
- Disable WMI devices for shutdown, refactoring continues
- Vexia EDU ATLA 10 tablet support
- Surface Pro 9 5G (Arm/QCOM) support
- Misc cleanups / refactoring / improvements
* tag 'platform-drivers-x86-v6.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (69 commits)
platform/x86: p2sb: Cache correct PCI bar for P2SB on Gemini Lake
platform/x86: panasonic-laptop: Return errno correctly in show callback
Documentation: alienware-wmi: Describe THERMAL_INFORMATION operation 0x02
alienware-wmi: create_thermal_profile() no longer brute-forces IDs
alienware-wmi: Adds support to Alienware x17 R2
alienware-wmi: extends the list of supported models
alienware-wmi: order alienware_quirks[] alphabetically
platform/x86/intel/pmt: allow user offset for PMT callbacks
platform/x86/amd/hsmp: Change the error type
platform/x86/amd/hsmp: Add new error code and error logs
platform/x86/amd: amd_3d_vcache: Add sysfs ABI documentation
platform/x86/amd: amd_3d_vcache: Add AMD 3D V-Cache optimizer driver
intel-hid: fix volume buttons on Thinkpad X12 Detachable Tablet Gen 1
platform/x86/amd/hsmp: mark hsmp_msg_desc_table[] as maybe_unused
platform/x86: asus-wmi: Use platform_profile_cycle()
platform/x86: asus-wmi: Fix inconsistent use of thermal policies
platform/x86: hp: hp-bioscfg: remove redundant if statement
MAINTAINERS: Update ISHTP ECLITE maintainer entry
platform/x86: x86-android-tablets: Add support for Vexia EDU ATLA 10 tablet
platform/x86: x86-android-tablets: Add support for getting i2c_adapter by PCI parent devname()
...
- Fix _CPC register setting issue for registers located in memory in
the ACPI CPPC library code (Lifeng Zheng).
- Use DEFINE_SIMPLE_DEV_PM_OPS in the ACPI battery driver, make it use
devm_ for initializing mutexes and allocating driver data, and make
it check the register_pm_notifier() return value (Thomas Weißschuh,
Andy Shevchenko).
- Make the ACPI EC driver support compile-time conditional and allow
ACPI to be built without CONFIG_HAS_IOPORT (Arnd Bergmann).
- Remove a redundant error check from the pfr_telemetry driver (Colin
Ian King).
- Rearrange the processor_perflib code in the ACPI processor driver
to avoid compiling x86-specific code on other architectures (Arnd
Bergmann).
- Add adev NULL check to acpi_quirk_skip_serdev_enumeration() and
make UART skip quirks work on PCI UARTs without an UID (Hans de
Goede).
- Force native backlight handling Apple MacbookPro11,2 and Air7,2 in
the ACPI video driver (Jonathan Denose).
- Switch several ACPI platform drivers back to using struct
platform_driver::remove() (Uwe Kleine-König).
- Replace strcpy() with strscpy() in multiple places in the ACPI
subsystem (Muhammad Qasim Abdul Majeed, Abdul Rahim).
-----BEGIN PGP SIGNATURE-----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=ejtE
-----END PGP SIGNATURE-----
Merge tag 'acpi-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI updates from Rafael Wysocki:
"These include a couple of fixes, a new ACPI backlight quirk for Apple
MacbookPro11,2 and Air7,2 and a bunch of cleanups:
- Fix _CPC register setting issue for registers located in memory in
the ACPI CPPC library code (Lifeng Zheng)
- Use DEFINE_SIMPLE_DEV_PM_OPS in the ACPI battery driver, make it
use devm_ for initializing mutexes and allocating driver data, and
make it check the register_pm_notifier() return value (Thomas
Weißschuh, Andy Shevchenko)
- Make the ACPI EC driver support compile-time conditional and allow
ACPI to be built without CONFIG_HAS_IOPORT (Arnd Bergmann)
- Remove a redundant error check from the pfr_telemetry driver (Colin
Ian King)
- Rearrange the processor_perflib code in the ACPI processor driver
to avoid compiling x86-specific code on other architectures (Arnd
Bergmann)
- Add adev NULL check to acpi_quirk_skip_serdev_enumeration() and
make UART skip quirks work on PCI UARTs without an UID (Hans de
Goede)
- Force native backlight handling Apple MacbookPro11,2 and Air7,2 in
the ACPI video driver (Jonathan Denose)
- Switch several ACPI platform drivers back to using struct
platform_driver::remove() (Uwe Kleine-König)
- Replace strcpy() with strscpy() in multiple places in the ACPI
subsystem (Muhammad Qasim Abdul Majeed, Abdul Rahim)"
* tag 'acpi-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (24 commits)
ACPI: video: force native for Apple MacbookPro11,2 and Air7,2
ACPI: CPPC: Fix _CPC register setting issue
ACPI: Switch back to struct platform_driver::remove()
ACPI: x86: Add adev NULL check to acpi_quirk_skip_serdev_enumeration()
ACPI: x86: Make UART skip quirks work on PCI UARTs without an UID
ACPI: allow building without CONFIG_HAS_IOPORT
ACPI: processor_perflib: extend X86 dependency
ACPI: scan: Use strscpy() instead of strcpy()
ACPI: SBSHC: Use strscpy() instead of strcpy()
ACPI: SBS: Use strscpy() instead of strcpy()
ACPI: power: Use strscpy() instead of strcpy()
ACPI: pci_root: Use strscpy() instead of strcpy()
ACPI: pci_link: Use strscpy() instead of strcpy()
ACPI: event: Use strscpy() instead of strcpy()
ACPI: EC: Use strscpy() instead of strcpy()
ACPI: APD: Use strscpy() instead of strcpy()
ACPI: thermal: Use strscpy() instead of strcpy()
ACPI: battery: Check for error code from devm_mutex_init() call
ACPI: EC: make EC support compile-time conditional
ACPI: pfr_telemetry: remove redundant error check on ret
...
* Fixes
- Fix a leak of fwnode refcount.
* Cleanups
- Drop unused I2C driver data.
- Move back from platform_driver::remove_new() to
platform_driver::remove().
-----BEGIN PGP SIGNATURE-----
iIkEABYIADEWIQS0yQeDP3cjLyifNRUrxTEGBto89AUCZzqB9xMcdHp1bmdiaUBr
ZXJuZWwub3JnAAoJECvFMQYG2jz0UawA/Ran3vo2ZW2QWidUXC3UysdAfrRUPVE1
pGxjN3sMC1FDAQDugrMciHDY/8fkY/vofGuQ8ctgL34m6qaWUuv3HnDnDw==
=8C9s
-----END PGP SIGNATURE-----
Merge tag 'chrome-platform-for-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux
Pull chrome platform updates from Tzung-Bi Shih:
"Fixes:
- Fix a leak of fwnode refcount.
Cleanups:
- Drop unused I2C driver data
- Move back from platform_driver::remove_new() to
platform_driver::remove()"
* tag 'chrome-platform-for-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux:
platform/chrome: Switch back to struct platform_driver::remove()
platform/chrome: cros_ec_typec: fix missing fwnode reference decrement
platform/chrome: Drop explicit initialization of struct i2c_device_id::driver_data to 0
Gemini Lake (Goldmont Plus) is an Apollo Lake (Goldmont) derived design and
as such has the P2SB at device.function 13.0, rather then at the default
31.1, just like Apollo Lake.
At a mapping to P2SB_DEVFN_GOLDMONT to p2sb_cpu_ids[] for Goldmont Plus,
so that the correct PCI bar gets cached.
This fixes P2SB unhiding not working on these devices, which fixes
SPI support for the bootrom SPI controller not working.
Fixes: 2841631a0365 ("platform/x86: p2sb: Allow p2sb_bar() calls during PCI device probe")
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20241116154546.85761-1-hdegoede@redhat.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
When an error occurs in sysfs show callback, we should return the errno
directly instead of formatting it as the result, which produces
meaningless output and doesn't inform the userspace of the error.
Fixes: 468f96bfa3a0 ("platform/x86: panasonic-laptop: Add support for battery charging threshold (eco mode)")
Fixes: d5a81d8e864b ("platform/x86: panasonic-laptop: Add support for optical driver power in Y and W series")
Signed-off-by: Yao Zi <ziyao@disroot.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20241118064637.61832-3-ziyao@disroot.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
WMAX_METHOD_THERMAL_INFORMATION has a *system description* operation
that outputs a buffer with the following structure:
out[0] -> Number of fans
out[1] -> Number of sensors
out[2] -> 0x00
out[3] -> Number of thermal modes
This is now used by create_thermal_profile() to retrieve available thermal
codes instead of brute-forcing every ID.
Tested on an Alienware x15 R1. Verified by checking ACPI tables of
supported models.
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20241111183623.14691-1-kuurtb@gmail.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Adds support to Alienware x17 R2
Tested-by: Samith Castro <SamithNarayam@hotmail.com>
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20241111183609.14653-1-kuurtb@gmail.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
alienware_quirks[] entries are now ordered alphabetically
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20241111183520.14573-1-kuurtb@gmail.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Merge updates of the ACPI battery and EC drivers, an ACPI Platform
Firmware Runtime (PFR) telemetry driver update and an ACPI OS support
layer change for 6.13-rc1:
- Use DEFINE_SIMPLE_DEV_PM_OPS in the ACPI battery driver, make it use
devm_ for initializing mutexes and allocating driver data, and make
it check the register_pm_notifier() return value (Thomas Weißschuh,
Andy Shevchenko).
- Make the ACPI EC driver support compile-time conditional and allow
ACPI to be built without CONFIG_HAS_IOPORT (Arnd Bergmann).
- Remove a redundant error check from the pfr_telemetry driver (Colin
Ian King).
* acpi-battery:
ACPI: battery: Check for error code from devm_mutex_init() call
ACPI: battery: use DEFINE_SIMPLE_DEV_PM_OPS
ACPI: battery: initialize mutexes through devm_ APIs
ACPI: battery: allocate driver data through devm_ APIs
ACPI: battery: check result of register_pm_notifier()
* acpi-ec:
ACPI: EC: make EC support compile-time conditional
* acpi-pfr:
ACPI: pfr_telemetry: remove redundant error check on ret
* acpi-osl:
ACPI: allow building without CONFIG_HAS_IOPORT
Usage of the telem sysfs file allows for partial reads at an offset.
The current callback method returns the buffer starting from offset 0
only.
Include the requested offset in the callback and update the necessary
address calculations with the offset.
Note: offset addition is moved from the caller to the local usage. For
non-callback usage this is unchanged behavior.
Fixes: e92affc74cd8 ("platform/x86/intel/vsec: Add PMT read callbacks")
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Link: https://lore.kernel.org/r/20241114130358.2467787-2-michael.j.ruhl@intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
