So that they don't need to indirect through the operation vector.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Vladimir Murzin <vladimir.murzin@arm.com>
The trivial direct mapping implementation already does a virtual to
physical translation which isn't strictly a noop, and will soon learn
to do non-direct but linear physical to dma translations through the
device offset and a few small tricks. Rename it to a better fitting
name.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Vladimir Murzin <vladimir.murzin@arm.com>
On dra7, as per TRM, the HW shutdown (TSHUT) temperature is hardcoded
to 123C and cannot be modified by SW. This means that when the temperature
reaches 123C HW asserts TSHUT output which signals a warm reset.
The reset is held until the temperature goes below the TSHUT low (105C).
While in SW, the thermal driver continuously monitors current temperature
and takes decisions based on whether it reached an alert or a critical point.
The intention of setting a SW critical point is to prevent force reset by HW
and instead do an orderly_poweroff(). But if the SW critical temperature is
greater than or equal to that of HW then it defeats the purpose. To address
this and let SW take action before HW does keep the SW critical temperature
less than HW TSHUT value.
The value for SW critical temperature was chosen as 120C just to ensure
we give SW sometime before HW catches up.
Document reference
SPRUI30C – DRA75x, DRA74x Technical Reference Manual - November 2016
SPRUHZ6H - AM572x Technical Reference Manual - November 2016
Tested on:
DRA75x PG 2.0 Rev H EVM
Signed-off-by: Ravikumar Kattekola <rk@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
When both lcd and tv are enabled, the order in which they will be probed is
unknown, so it might happen (and it happens in reality) that tv is
configured as display0 and lcd as display1, which results in nothing
displayed on lcd, as display1 is disabled by default.
Fix that by providing correct aliases for lcd and tv
Signed-off-by: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Let's update the existing users with features and clock data as
specified in the binding. This is currently the smartreflex for most
part, and also few omap4 modules with no child device driver like
mcasp, abe iss and gfx.
Note that we had few mistakes that did not get noticed as we're still
probing the SmartReflex driver with legacy platform data and using
"ti,hwmods" legacy property for ti-sysc driver.
So let's fix the omap4 and dra7 smartreflex registers as there is no
no revision register.
And on omap4, the mcasp module has a revision register according to
the TRM.
And for omap34xx we need a different configuration compared to 36xx.
And the smartreflex on 3517 we've always kept disabled so let's
remove any references to it.
Signed-off-by: Tony Lindgren <tony@atomide.com>
The smartreflex instance for mpu and iva is shared. Let's fix this as I've
already gotten confused myself few times wondering where the mpu instance
is. Note that we are still probing the driver using platform data so this
change is safe to do.
Signed-off-by: Tony Lindgren <tony@atomide.com>
Setting si_code to 0 results in a userspace seeing an si_code of 0.
This is the same si_code as SI_USER. Posix and common sense requires
that SI_USER not be a signal specific si_code. As such this use of 0
for the si_code is a pretty horribly broken ABI.
Further use of si_code == 0 guaranteed that copy_siginfo_to_user saw a
value of __SI_KILL and now sees a value of SIL_KILL with the result
that uid and pid fields are copied and which might copying the si_addr
field by accident but certainly not by design. Making this a very
flakey implementation.
Utilizing FPE_FIXME, siginfo_layout will now return SIL_FAULT and the
appropriate fields will be reliably copied.
Possible ABI fixes includee:
- Send the signal without siginfo
- Don't generate a signal
- Possibly assign and use an appropriate si_code
- Don't handle cases which can't happen
Cc: Russell King <rmk@flint.arm.linux.org.uk>
Cc: linux-arm-kernel@lists.infradead.org
Ref: 451436b7bbb2 ("[ARM] Add support code for ARM hardware vector floating point")
History Tree: https://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
As OneNAND driver is now using devicetree gpmc-onenand and its
platform data is unused and can be removed.
Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: Roger Quadros <rogerq@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Tested-by: Tony Lindgren <tony@atomide.com>
Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Update node timings to be compatible with actual chip used -
gpmc_cs_show_timings utilized to dump values.
Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: Roger Quadros <rogerq@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
OMAP onenand nodes are missing compatible property, add it.
Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: Roger Quadros <rogerq@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Tested-by: Tony Lindgren <tony@atomide.com>
Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Choose to compile and embed marvell_nand.c as NAND controller driver
instead of the legacy pxa3xx_nand.c for platforms with Marvell EBU
SoCs.
Signed-off-by: Miquel Raynal <miquel.raynal@free-electrons.com>
Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
We need to consistently enforce that keyed hashes cannot be used without
setting the key. To do this we need a reliable way to determine whether
a given hash algorithm is keyed or not. AF_ALG currently does this by
checking for the presence of a ->setkey() method. However, this is
actually slightly broken because the CRC-32 algorithms implement
->setkey() but can also be used without a key. (The CRC-32 "key" is not
actually a cryptographic key but rather represents the initial state.
If not overridden, then a default initial state is used.)
Prepare to fix this by introducing a flag CRYPTO_ALG_OPTIONAL_KEY which
indicates that the algorithm has a ->setkey() method, but it is not
required to be called. Then set it on all the CRC-32 algorithms.
The same also applies to the Adler-32 implementation in Lustre.
Also, the cryptd and mcryptd templates have to pass through the flag
from their underlying algorithm.
Cc: stable@vger.kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This fixes the following warning by also sending the flags argument for
gpio controllers:
Property 'cs-gpios', cell 6 is not a phandle reference in
/ahb/apb/spi@e0100000
Fixes: 8113ba917dfa ("ARM: SPEAr: DT: Update device nodes")
Cc: stable@vger.kernel.org # v3.8+
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
The "dmas" cells for the designware DMA controller need to have only 3
properties apart from the phandle: request line, src master and
destination master. But the commit 6e8887f60f60 updated it incorrectly
while moving from platform code to DT. Fix it.
Cc: stable@vger.kernel.org # v3.10+
Fixes: 6e8887f60f60 ("ARM: SPEAr13xx: Pass generic DW DMAC platform data from DT")
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
One fix that fixes the display pipeline description in the device tree
for the A10 and A20 SoCs. This description was introduced in 4.15-rc1
with a mismatch in the graph remote endpoints, which would likely
result in the driver misinterpreting how the individual components fit
together.
-----BEGIN PGP SIGNATURE-----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=m59a
-----END PGP SIGNATURE-----
Merge tag 'sunxi-fixes-for-4.15-2' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into fixes
Allwinner fixes for 4.15, round 2
One fix that fixes the display pipeline description in the device tree
for the A10 and A20 SoCs. This description was introduced in 4.15-rc1
with a mismatch in the graph remote endpoints, which would likely
result in the driver misinterpreting how the individual components fit
together.
* tag 'sunxi-fixes-for-4.15-2' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
ARM: dts: sun[47]i: Fix display backend 1 output to TCON0 remote endpoint
Signed-off-by: Olof Johansson <olof@lixom.net>
2 device tree related fixes fixing 2 issues:
- broken pinctrl support since 4.11 on OpenBlocks A7
- implicit clock dependency making the kernel hang if the Xenon sdhci
module was loaded before the mvpp2 Ethernet support (for this one
the driver had to be fixed which was done in v4.14)
-----BEGIN PGP SIGNATURE-----
iIEEABECAEEWIQQYqXDMF3cvSLY+g9cLBhiOFHI71QUCWk+glCMcZ3JlZ29yeS5j
bGVtZW50QGZyZWUtZWxlY3Ryb25zLmNvbQAKCRALBhiOFHI71Zt+AJ9ozVoJfwdf
79od8wlcB4PUvHb6FgCgqkH7FXqfkpHLdFYm8E9GRlj6nVY=
=9vZv
-----END PGP SIGNATURE-----
Merge tag 'mvebu-fixes-4.15-1' of git://git.infradead.org/linux-mvebu into fixes
mvebu fixess for 4.15 (part 1)
2 device tree related fixes fixing 2 issues:
- broken pinctrl support since 4.11 on OpenBlocks A7
- implicit clock dependency making the kernel hang if the Xenon sdhci
module was loaded before the mvpp2 Ethernet support (for this one
the driver had to be fixed which was done in v4.14)
* tag 'mvebu-fixes-4.15-1' of git://git.infradead.org/linux-mvebu:
ARM64: dts: marvell: armada-cp110: Fix clock resources for various node
ARM: dts: kirkwood: fix pin-muxing of MPP7 on OpenBlocks A7
Signed-off-by: Olof Johansson <olof@lixom.net>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=Cjvs
-----END PGP SIGNATURE-----
Merge tag 'davinci-for-v4.16/dt' of https://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into fixes
A DT warning fix for W=1 warning message.
* tag 'davinci-for-v4.16/dt' of https://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci:
ARM: dts: da850-lcdk: Remove leading 0x and 0s from unit address
Signed-off-by: Olof Johansson <olof@lixom.net>
A few improvements to our DT support, with:
- basic DRM support for the A83t
- simplefb support for the H3 and H5 SoCs
- One fix for the USB ethernet on the Orange Pi R1
-----BEGIN PGP SIGNATURE-----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=bDG2
-----END PGP SIGNATURE-----
Merge tag 'sunxi-dt-for-4.16-2' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into next/dt
Allwinner DT changes for 4.16, bis
A few improvements to our DT support, with:
- basic DRM support for the A83t
- simplefb support for the H3 and H5 SoCs
- One fix for the USB ethernet on the Orange Pi R1
* tag 'sunxi-dt-for-4.16-2' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
ARM: dts: sun8i: a711: Enable the LCD
ARM: dts: sun8i: a83t: Add LVDS pins group
ARM: dts: sun8i: a83t: Enable the PWM
ARM: dts: sun8i: a83t: Add display pipeline
ARM: sunxi: h3/h5: add simplefb nodes
arm64: allwinner: h5: add compatible string for DE2 CCU
ARM: sun8i: h3/h5: add DE2 CCU device node for H3
dt-bindings: simplefb-sunxi: add pipelines for DE2
ARM: dts: sun8i: fix USB Ethernet of Orange Pi R1
Signed-off-by: Olof Johansson <olof@lixom.net>
- Fix a GICv3 issue when parsing ACPI entries for disabled CPUs
- Driver for the MIPS Goldfish virtual platform
- Small fixlet for the ompic driver
- Interrupt polatiry support for the Raspberry Pi irqchip
-----BEGIN PGP SIGNATURE-----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=QFqN
-----END PGP SIGNATURE-----
Merge tag 'irqchip-4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/core
Pull irqchip updates for 4.16 from Marc Zyngier
- Fix a GICv3 issue when parsing ACPI entries for disabled CPUs
- Driver for the MIPS Goldfish virtual platform
- Small fixlet for the ompic driver
- Interrupt polarity support for the Raspberry Pi irqchip
- Enable CPU_FREQ_STAT for cpufreq transtion statistics support.
- Enable SRTC driver RTC_DRV_MXC_V2 for i.MX53.
- Turn on a few drivers useful for DART-MX6 SoM support, SERDEV
bluetooth, SERIAL_DEV_BUS, WL18XX, and DEFAULT_ON LED Trigger.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJaUDsIAAoJEFBXWFqHsHzORfIH/RQf/Kg7HHFd78qk7TVIbfIK
uH/YspvDReV5cDdiJIoTQiAZTC6MvdlGtG/PevrQHA6F7jjJdRNhwS6VT1pCaidg
pS52OSWIUqFrYdTPuBCyF/tS7lPsiKm74YZzePBUKBz9EEhsTs9bAcL4J6WGkPAN
GcIxe0PG7/SzFQFJMomND4Of2Idru4HP5OHlJFY2K68rVgpdn7DA3+cA2ChB8Ajm
vR9JJO58DwPpNtXf1KiyMur+srKsSn1bvJdu7qvYReNYPHxc6semKo82KgznmNfu
tSfPcDpKOyvYtSEa02TSV5Y1MTtmgTSFcrwh3/SzGZ7qurbkQtS4Cc1YGo5q47A=
=5J9f
-----END PGP SIGNATURE-----
Merge tag 'imx-defconfig-4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/soc
i.MX defconfig updates for 4.16:
- Enable CPU_FREQ_STAT for cpufreq transtion statistics support.
- Enable SRTC driver RTC_DRV_MXC_V2 for i.MX53.
- Turn on a few drivers useful for DART-MX6 SoM support, SERDEV
bluetooth, SERIAL_DEV_BUS, WL18XX, and DEFAULT_ON LED Trigger.
* tag 'imx-defconfig-4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: imx_v6_v7_defconfig: enable CONFIG_CPU_FREQ_STAT
ARM: imx_v6_v7_defconfig: enable RTC_DRV_MXC_V2
ARM: imx_v6_v7_defconfig: Add missing config for DART-MX6 SoM
Signed-off-by: Olof Johansson <olof@lixom.net>
And unlike the other helpers we don't require a <asm/dma-direct.h> as
this helper is a special case for ia64 only, and this keeps it as
simple as possible.
Signed-off-by: Christoph Hellwig <hch@lst.de>
phys_to_dma, dma_to_phys and dma_capable are helpers published by
architecture code for use of swiotlb and xen-swiotlb only. Drivers are
not supposed to use these directly, but use the DMA API instead.
Move these to a new asm/dma-direct.h helper, included by a
linux/dma-direct.h wrapper that provides the default linear mapping
unless the architecture wants to override it.
In the MIPS case the existing dma-coherent.h is reused for now as
untangling it will take a bit of work.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Robin Murphy <robin.murphy@arm.com>
Construct the init thread stack in the linker script rather than doing it
by means of a union so that ia64's init_task.c can be got rid of.
The following symbols are then made available from INIT_TASK_DATA() linker
script macro:
init_thread_union
init_stack
INIT_TASK_DATA() also expands the region to THREAD_SIZE to accommodate the
size of the init stack. init_thread_union is given its own section so that
it can be placed into the stack space in the right order. I'm assuming
that the ia64 ordering is correct and that the task_struct is first and the
thread_info second.
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Tony Luck <tony.luck@intel.com>
Tested-by: Will Deacon <will.deacon@arm.com> (arm64)
Tested-by: Palmer Dabbelt <palmer@sifive.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
This reverts commit 8a99b6ad4da2f90969bb2ebb426c1d3dd0089fa4.
Geert doesn't want it going in through the USB tree, ok, whatever...
Cc: Chris Brandt <chris.brandt@renesas.com>
Reported-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is only one clock each for "musb-da8xx" and "ohci-da8xx", so we
do not the the con_id. Removing them will also prevent needing an
unnecessary device tree property when device tree bindings are added
for clocks.
Signed-off-by: David Lechner <david@lechnology.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Now that we have per-CPU vectors, let's plug then in the KVM/arm64 code.
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The vcpu parameter isn't used for anything, and gets in the way of
further cleanups. Let's get rid of it.
Acked-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
So far, we loose the Exec property whenever we take permission
faults, as we always reconstruct the PTE/PMD from scratch. This
can be counter productive as we can end-up with the following
fault sequence:
X -> RO -> ROX -> RW -> RWX
Instead, we can lookup the existing PTE/PMD and clear the XN bit in the
new entry if it was already cleared in the old one, leadig to a much
nicer fault sequence:
X -> ROX -> RWX
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
We've so far eagerly invalidated the icache, no matter how
the page was faulted in (data or prefetch abort).
But we can easily track execution by setting the XN bits
in the S2 page tables, get the prefetch abort at HYP and
perform the icache invalidation at that time only.
As for most VMs, the instruction working set is pretty
small compared to the data set, this is likely to save
some traffic (specially as the invalidation is broadcast).
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Calling __cpuc_coherent_user_range to invalidate the icache on
a PIPT icache machine has some pointless overhead, as it starts
by cleaning the dcache to the PoU, while we're guaranteed to
have already cleaned it to the PoC.
As KVM is the only user of such a feature, let's implement some
ad-hoc cache flushing in kvm_mmu.h. Should it become useful to
other subsystems, it can be moved to a more global location.
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
As we're about to introduce opportunistic invalidation of the icache,
let's split dcache and icache flushing.
Acked-by: Christoffer Dall <cdall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
kvm_hyp.h has an odd dependency on kvm_mmu.h, which makes the
opposite inclusion impossible. Let's start with breaking that
useless dependency.
Acked-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
According to the comment added to exynos_dt_pmu_match[] in commit
8b283c025443 ("ARM: exynos4/5: convert pmu wakeup to stacked domains"),
the RTC is not able to wake up the system through the PMU on Exynos5410,
unlike Exynos5420.
However, when the RTC DT node got added, it was a straight copy of
the Exynos5420 node, which now causes a warning from dtc.
This removes the incorrect interrupt-parent, which should get the
interrupt working and avoid the warning.
Fixes: e1e146b1b062 ("ARM: dts: exynos: Add RTC and I2C to Exynos5410")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
This reverts commit 6737b081409a4373e9d02c75aea7b916481e31b5.
Unlike on Exynos5420-family, on Exynos5410 the PMU is not an interrupt
controller so it should not handle interrupts of RTC. The DTC warning
(addressed by mentioned commit) should be fixed by not routing RTC
interrupts to PMU.
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
There is a copy-paste error in the display pipeline device tree graph.
The remote endpoint of the display backend 1's output to TCON0 points
to the wrong endpoint. This will result in the driver incorrectly
parsing the relationship of the components.
Reported-by: Andrea Venturi <ennesimamail.av@gmail.com>
Fixes: 0df4cf33a594 ("ARM: dts: sun4i: Add device nodes for display
pipelines")
Fixes: 5b92b29bed45 ("ARM: dts: sun7i: Add device nodes for display
pipelines")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
It is very useful for user to retrieve cpufreq transtion statistics
and worth to be default enabled.
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
data structures, removal of unnecessary newlines from gpio labels and code
simplification.
Also a defconfig update for DaVinci, enabling support for USB network adaptors.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=oZrM
-----END PGP SIGNATURE-----
Merge tag 'davinci-for-v4.16/soc-v2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into next/soc
Pull "TI DaVinci SoC support updates for v4.16" from Sekhar Nori:
DaVinci SoC updates consisting of non-critical bug fixes including constifying
data structures, removal of unnecessary newlines from gpio labels and code
simplification.
Also a defconfig update for DaVinci, enabling support for USB network adaptors.
* tag 'davinci-for-v4.16/soc-v2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci:
ARM: davinci: constify gpio_led
ARM: davinci: drop unneeded newline
ARM: davinci: Use PTR_ERR_OR_ZERO()
ARM: davinci: make davinci_soc_info structures const
ARM: davinci: make argument to davinci_common_init() as const
ARM: davinci_all_defconfig: enable support for USB network adaptors
- Drop power saving status checking from MMDC driver probe function,
since there is nothing really depending on power saving being
enabled.
- Clean up unused imx3 pm definitions.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJaTCoAAAoJEFBXWFqHsHzOhO8H/2dA59AXGNc0HQGChD46R0sY
mogHzAPhmziEE3/t/CL1PLeGtp8Z5enVQa/ckd0AByIdMbN4gTXiGrOLMwXF3fpP
jpkhWw6ZPb/jz53zDLWcEPhwnFu2ANUF7dAYgA4rI7742idqy21zbD9tXpJFU+ZM
f7ieXqjVAoQ4vKG8pPCrTyEn6urEAZP2cOmW6WvYcLpyMIFRFoLHCthA3DtHAobG
910VtDyMOg4Bc4uvn26SWZCwC5+hXxda75Uc9lgdSGG3nO7LIFi4shcwh87mTFtI
eOJ23UTtB6C4lTIPZwUDeA2YIsWdQRfWIdtGwGrPztB+R+HYblwCmNk4zAZOIXM=
=l5gq
-----END PGP SIGNATURE-----
Merge tag 'imx-soc-4.16' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/soc
Pull "i.MX SoC updates for 4.16" from Shawn Guo:
- Drop power saving status checking from MMDC driver probe function,
since there is nothing really depending on power saving being
enabled.
- Clean up unused imx3 pm definitions.
* tag 'imx-soc-4.16' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: imx: remove unused imx3 pm definitions
ARM: imx: don't abort MMDC probe if power saving status doesn't match
The main change here are the series of commits doing the Armada 7K/8K
CP110 DT de-duplication, they include the de-duplication itself and
small fixes in the device tree files.
Besides them there are 2 other patches:
- One adding the crypto support for Armada 37xx SoCs
- An other adding Ethernet aliases on A7K/A8K base boards
-----BEGIN PGP SIGNATURE-----
iIEEABECAEEWIQQYqXDMF3cvSLY+g9cLBhiOFHI71QUCWk+h0CMcZ3JlZ29yeS5j
bGVtZW50QGZyZWUtZWxlY3Ryb25zLmNvbQAKCRALBhiOFHI71ZU9AKCNLcEcewii
UWPVUzEsQ/+UPojO4wCdHqum9OT33XChVrxHGKP89Dnj1ro=
=HCIC
-----END PGP SIGNATURE-----
Merge tag 'mvebu-dt64-4.16-2' of git://git.infradead.org/linux-mvebu into next/dt
Pull "mvebu dt64 for 4.16 (part 2)" from Gregory CLEMENT:
The main change here are the series of commits doing the Armada 7K/8K
CP110 DT de-duplication, they include the de-duplication itself and
small fixes in the device tree files.
Besides them there are 2 other patches:
- One adding the crypto support for Armada 37xx SoCs
- An other adding Ethernet aliases on A7K/A8K base boards
* tag 'mvebu-dt64-4.16-2' of git://git.infradead.org/linux-mvebu:
arm64: dts: marvell: add Ethernet aliases
arm64: dts: marvell: replace cpm by cp0, cps by cp1
arm64: dts: marvell: de-duplicate CP110 description
arm64: dts: marvell: use aliases for SPI busses on Armada 7K/8K
arm64: dts: marvell: use mvebu-icu.h where possible
arm64: dts: marvell: fix compatible string list for Armada CP110 slave NAND
arm64: dts: marvell: fix typos in comment describing the NAND controller
arm64: dts: marvell: use lower case for unit address and reg property
arm64: dts: marvell: fix watchdog unit address in Armada AP806
arm64: dts: marvell: armada-37xx: add a crypto node
ARM64: dts: marvell: armada-cp110: Fix clock resources for various node
ARM: dts: kirkwood: fix pin-muxing of MPP7 on OpenBlocks A7
- A few random updates for vf610-zii board: correct switch EEPROM size,
enable edma1, correct GPIO expander interrupt, add PHYs for switch2
device.
- LS1021A device tree updates: add reboot and QSPI device nodes, label
USB controllers, specify interrupt-affinity for PMU, fix TMR_FIPER1
setting, enable esdhc device, add Moxa UC-8410A board support.
- A bunch of patches from Fabio: fix reg - unit address mismatches,
remove leading zero in unit address, move regulators out of
simple-bus, move nodes with no reg property out of bus, remove extra
clock cell, add missing phy-cells to usb-nop-xceiv, etc.
- A couple series from Hummingboard developers: re-organise device tree
files for better handling various board versions, and then add the
new hummingboard2 board support on top of that.
- Disable AC'97 input pins pad and add support for powering off for
imx6qdl-udoo board.
- Convert from fbdev to drm bindings for imx6sx-sdb and imx6sl-evk
board.
- Add device tree for Variscite DART-MX6 SoM and Carrier-board support.
- Add new board support of TS-4600 and TS-7970 from Technologic
Systems.
- A series from Stefan to update imx7-colibri device tree and then add
new version of Toradex Colibri iMX7D board with eMMC support.
- Other random updates on various board support.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJaTDRSAAoJEFBXWFqHsHzO5qwIAJ9iqSd41KE50kX2QPWa6Uqa
Dfj0BcR4RdFpf4FqCOM6ntjVhUEyxNUtwINuMr6eCI8BK1NGeLNJGm9LK77/RwoE
wmUFTcGelzx4iEWVouD1NoCxIvVFm5RyO26JC/0GPUbulKvcTRma+GQBV218ZOcz
5GYZ2vlmvddwfgNCF+w2tRB07s5kFKWk9S+w7oDd2qF4qztOzBWMr+i5gdtLAboc
iaWS1+9RQu1FbtuanHAbCFmaQrPV2YsDnnIQYMBqpKlFoO7oUSJCDkINWy0BXq7f
eXXLj/hwc8cAC0MM5kuvScEcgKth0p7W0kQETzC19v1EFYx1CxFwFjxXYQ16iCQ=
=1F3D
-----END PGP SIGNATURE-----
Merge tag 'imx-dt-4.16' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/dt
Pull "i.MX device tree changes for 4.16" from Shawn Guo:
- A few random updates for vf610-zii board: correct switch EEPROM size,
enable edma1, correct GPIO expander interrupt, add PHYs for switch2
device.
- LS1021A device tree updates: add reboot and QSPI device nodes, label
USB controllers, specify interrupt-affinity for PMU, fix TMR_FIPER1
setting, enable esdhc device, add Moxa UC-8410A board support.
- A bunch of patches from Fabio: fix reg - unit address mismatches,
remove leading zero in unit address, move regulators out of
simple-bus, move nodes with no reg property out of bus, remove extra
clock cell, add missing phy-cells to usb-nop-xceiv, etc.
- A couple series from Hummingboard developers: re-organise device tree
files for better handling various board versions, and then add the
new hummingboard2 board support on top of that.
- Disable AC'97 input pins pad and add support for powering off for
imx6qdl-udoo board.
- Convert from fbdev to drm bindings for imx6sx-sdb and imx6sl-evk
board.
- Add device tree for Variscite DART-MX6 SoM and Carrier-board support.
- Add new board support of TS-4600 and TS-7970 from Technologic
Systems.
- A series from Stefan to update imx7-colibri device tree and then add
new version of Toradex Colibri iMX7D board with eMMC support.
- Other random updates on various board support.
* tag 'imx-dt-4.16' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (126 commits)
ARM: dts: imx7s: Avoid using label in unit address and reg
ARM: dts: imx51-zii-rdu1: Add missing #phy-cells to usb-nop-xceiv
ARM: dts: imx6qdl-hummingboard2: Remove leading zero in unit address
ARM: dts: ls1021a: add support for Moxa UC-8410A open platform
ARM: dts: imx51-babbage: Fix the 26MHz clock modelling
ARM: dts: vf610-zii-dev-rev-b: add PHYs for switch2
ARM: dts: vf610-zii-dev-rev-b: fix interrupt for GPIO expander
ARM: dts: vf610-zii-dev: enable edma1
ARM: dts: ls1021a-twr: Remove extra clock cell
ARM: dts: ls1021a-qds: Remove extra clock cell
ARM: dts: imx53: add srtc node
dt-bindings: imx-gpcv2: Fix the unit address
ARM: imx: dts: Use lower case for bindings notation
ARM: dts: imx6q-h100: use usdhc2 VSELECT
ARM: dts: imx6sx: Add support for PCI power domain
ARM: dts: imx6sx: Fix PCI non-prefetchable memory range
ARM: dts: imx6qdl-hummingboard2: rename regulators to match schematic
ARM: dts: imx6qdl-hummingboard2: add v1.5 som with eMMC
ARM: dts: imx6qdl-hummingboard2: add v1.5 som without eMMC
ARM: dts: imx6qdl-hummingboard2: add PWM3 support
...
Clock driver support:
Rework all platforms to use proper clock bindings. Linux should now boot
upstream kernels on ast2400 and ast2500 platforms without out of tree
patches.
New systems:
Witherspoon: OpenPower Power9 server manufactured by IBM that uses the ASPEED ast2500
Zaius: OpenPower Power9 server manufactured by Invatech that uses the ASPEED ast2500
Q71L: Intel Xeon server manufactured by Qanta that uses the ASPEED ast2400
We also see updates to the Palmetto and Romulus systems to bring them in
line with the functionality of those above.
The systems take advantage of recently added drivers for LPC Snoop
device and the PWM/Tachometer fan controller.
OpenBMC flash layout:
The flash layout used OpenBMC systems is added and the device trees now
use it.
-----BEGIN PGP SIGNATURE-----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=H9im
-----END PGP SIGNATURE-----
Merge tag 'aspeed-4.16-devicetree' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/joel/aspeed into next/dt
Pull "ASPEED device tree updates for 4.16" from Joel Stanley:
Clock driver support:
Rework all platforms to use proper clock bindings. Linux should now boot
upstream kernels on ast2400 and ast2500 platforms without out of tree
patches.
New systems:
Witherspoon: OpenPower Power9 server manufactured by IBM that uses the ASPEED ast2500
Zaius: OpenPower Power9 server manufactured by Invatech that uses the ASPEED ast2500
Q71L: Intel Xeon server manufactured by Qanta that uses the ASPEED ast2400
We also see updates to the Palmetto and Romulus systems to bring them in
line with the functionality of those above.
The systems take advantage of recently added drivers for LPC Snoop
device and the PWM/Tachometer fan controller.
OpenBMC flash layout:
The flash layout used OpenBMC systems is added and the device trees now
use it.
* tag 'aspeed-4.16-devicetree' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/joel/aspeed:
ARM: dts: aspeed-evb: Add unit name to memory node
ARM: dts: aspeed-plametto: Add flash layout and fix memory node
ARM: dts: aspeed-romulus: Update Romulus system
ARM: dts: aspeed: Add Qanta Q71L BMC machine
ARM: dts: aspeed: Add Ingrasys Zaius BMC machine
ARM: dts: aspeed: Add Witherspoon BMC machine
ARM: dts: aspeed: Sort ASPEED entries in makefile
ARM: dts: Add OpenBMC flash layout
ARM: dts: aspeed: Update license headers
ARM: dts: aspeed: Remove skeleton.dtsi
ARM: dts: aspeed: Add LPC Snoop device
ARM: dts: aspeed: Add PWM and tachometer node
ARM: dts: aspeed: Add clock phandle to GPIO
ARM: dts: aspeed: Add flash controller clocks
ARM: dts: aspeed: Add watchdog clocks
ARM: dts: aspeed: Add MAC clocks
ARM: dts: aspeed: Add proper clock references
ARM: dts: aspeed: Add LPC and child devices
dt-bindings: gpio: Add ASPEED constants
dt-bindings: clock: Add ASPEED constants
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
print_symbol() is a very old API that has been obsoleted by %pS format
specifier in a normal printk() call.
Replace print_symbol() with a direct printk("%pS") call.
Link: http://lkml.kernel.org/r/20171211125025.2270-2-sergey.senozhatsky@gmail.com
To: Andrew Morton <akpm@linux-foundation.org>
To: Russell King <linux@armlinux.org.uk>
To: Catalin Marinas <catalin.marinas@arm.com>
To: Mark Salter <msalter@redhat.com>
To: Tony Luck <tony.luck@intel.com>
To: David Howells <dhowells@redhat.com>
To: Yoshinori Sato <ysato@users.sourceforge.jp>
To: Guan Xuetao <gxt@mprc.pku.edu.cn>
To: Borislav Petkov <bp@alien8.de>
To: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: Thomas Gleixner <tglx@linutronix.de>
To: Peter Zijlstra <peterz@infradead.org>
To: Vineet Gupta <vgupta@synopsys.com>
To: Fengguang Wu <fengguang.wu@intel.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: LKML <linux-kernel@vger.kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-c6x-dev@linux-c6x.org
Cc: linux-ia64@vger.kernel.org
Cc: linux-am33-list@redhat.com
Cc: linux-sh@vger.kernel.org
Cc: linux-edac@vger.kernel.org
Cc: x86@kernel.org
Cc: linux-snps-arc@lists.infradead.org
Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
[pmladek@suse.com: updated commit message, fixed complication warning]
Signed-off-by: Petr Mladek <pmladek@suse.com>
gpio_led are not supposed to change at runtime.
struct gpio_led_platform_data working with const gpio_led
provided by <linux/leds.h>. So mark the non-const structs
as const.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
