Because it uses DIO writes, cachefiles is unable to make a write to the
backing file if that write is not aligned to and sized according to the
backing file's DIO block alignment. This makes it tricky to handle a write
to the cache where the EOF on the network file is not correctly aligned.
To get around this, netfslib attempts to tell the driver it is calling how
much more data there is available beyond the EOF that it can use to pad the
write (netfslib preclears the part of the folio above the EOF). However,
it tries to tell the cache what the maximum length is, but doesn't
calculate this correctly; and, in any case, cachefiles actually ignores the
value and just skips the block.
Fix this by:
(1) Change the value passed to indicate the amount of extra data that can
be added to the operation (now ->submit_extendable_to). This is much
simpler to calculate as it's just the end of the folio minus the top
of the data within the folio - rather than having to account for data
spread over multiple folios.
(2) Make cachefiles add some of this data if the subrequest it is given
ends at the network file's i_size if the extra data is sufficient to
pad out to a whole block.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Link: https://lore.kernel.org/r/20240814203850.2240469-22-dhowells@redhat.com/ # v2
Signed-off-by: Christian Brauner <brauner@kernel.org>
Improve the efficiency of buffered reads in a number of ways:
(1) Overhaul the algorithm in general so that it's a lot more compact and
split the read submission code between buffered and unbuffered
versions. The unbuffered version can be vastly simplified.
(2) Read-result collection is handed off to a work queue rather than being
done in the I/O thread. Multiple subrequests can be processes
simultaneously.
(3) When a subrequest is collected, any folios it fully spans are
collected and "spare" data on either side is donated to either the
previous or the next subrequest in the sequence.
Notes:
(*) Readahead expansion is massively slows down fio, presumably because it
causes a load of extra allocations, both folio and xarray, up front
before RPC requests can be transmitted.
(*) RDMA with cifs does appear to work, both with SIW and RXE.
(*) PG_private_2-based reading and copy-to-cache is split out into its own
file and altered to use folio_queue. Note that the copy to the cache
now creates a new write transaction against the cache and adds the
folios to be copied into it. This allows it to use part of the
writeback I/O code.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Link: https://lore.kernel.org/r/20240814203850.2240469-20-dhowells@redhat.com/ # v2
Signed-off-by: Christian Brauner <brauner@kernel.org>
Use the new folio_queue structures to simplify the writeback code. The
problem with referring to the i_pages xarray directly is that we may have
gaps in the sequence of folios we're writing from that we need to skip when
we're removing the writeback mark from the folios we're writing back from.
At the moment the code tries to deal with this by carefully tracking the
gaps in each writeback stream (eg. write to server and write to cache) and
divining when there's a gap that spans folios (something that's not helped
by folios not being a consistent size).
Instead, the folio_queue buffer contains pointers only the folios we're
dealing with, has them in ascending order and indicates a gap by placing
non-consequitive folios next to each other. This makes it possible to
track where we need to clean up to by just keeping track of where we've
processed to on each stream and taking the minimum.
Note that the I/O iterator is always rounded up to the end of the folio,
even if that is beyond the EOF position, so that the cache can do DIO from
the page. The excess space is cleared, though mmapped writes clobber it.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Link: https://lore.kernel.org/r/20240814203850.2240469-18-dhowells@redhat.com/ # v2
Signed-off-by: Christian Brauner <brauner@kernel.org>
Make the netfs write-side routines use the new folio_queue struct to hold a
rolling buffer of folios, with the issuer adding folios at the tail and the
collector removing them from the head as they're processed instead of using
an xarray.
This will allow a subsequent patch to simplify the write collector.
The primary mark (as tested by folioq_is_marked()) is used to note if the
corresponding folio needs putting.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Link: https://lore.kernel.org/r/20240814203850.2240469-16-dhowells@redhat.com/ # v2
Signed-off-by: Christian Brauner <brauner@kernel.org>
Reserve the 0-valued netfs_sreq_source to mean unset or unknown so that it
can be seen in the trace as such rather than appearing as
download-from-server when it's going to get switched to something else.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Link: https://lore.kernel.org/r/20240814203850.2240469-9-dhowells@redhat.com/ # v2
Signed-off-by: Christian Brauner <brauner@kernel.org>
Move max_len/max_nr_segs from struct netfs_io_subrequest to struct
netfs_io_stream as we only issue one subreq at a time and then don't need
these values again for that subreq unless and until we have to retry it -
in which case we want to renegotiate them.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Link: https://lore.kernel.org/r/20240814203850.2240469-8-dhowells@redhat.com/ # v2
Signed-off-by: Christian Brauner <brauner@kernel.org>
Short DIO reads, particularly in relation to cifs, are not being handled
correctly by cifs and netfslib. This can be tested by doing a DIO read of
a file where the size of read is larger than the size of the file. When it
crosses the EOF, it gets a short read and this gets retried, and in the
case of cifs, the retry read fails, with the failure being translated to
ENODATA.
Fix this by the following means:
(1) Add a flag, NETFS_SREQ_HIT_EOF, for the filesystem to set when it
detects that the read did hit the EOF.
(2) Make the netfslib read assessment stop processing subrequests when it
encounters one with that flag set.
(3) Return rreq->transferred, the accumulated contiguous amount read to
that point, to userspace for a DIO read.
(4) Make cifs set the flag and clear the error if the read RPC returned
ENODATA.
(5) Make cifs set the flag and clear the error if a short read occurred
without error and the read-to file position is now at the remote inode
size.
Fixes: 69c3c023af25 ("cifs: Implement netfslib hooks")
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Steve French <sfrench@samba.org>
cc: Paulo Alcantara <pc@manguebit.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: linux-cifs@vger.kernel.org
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
The NETFS_RREQ_USE_PGPRIV2 and NETFS_RREQ_WRITE_TO_CACHE flags aren't used
correctly. The problem is that we try to set them up in the request
initialisation, but we the cache may be in the process of setting up still,
and so the state may not be correct. Further, we secondarily sample the
cache state and make contradictory decisions later.
The issue arises because we set up the cache resources, which allows the
cache's ->prepare_read() to switch on NETFS_SREQ_COPY_TO_CACHE - which
triggers cache writing even if we didn't set the flags when allocating.
Fix this in the following way:
(1) Drop NETFS_ICTX_USE_PGPRIV2 and instead set NETFS_RREQ_USE_PGPRIV2 in
->init_request() rather than trying to juggle that in
netfs_alloc_request().
(2) Repurpose NETFS_RREQ_USE_PGPRIV2 to merely indicate that if caching is
to be done, then PG_private_2 is to be used rather than only setting
it if we decide to cache and then having netfs_rreq_unlock_folios()
set the non-PG_private_2 writeback-to-cache if it wasn't set.
(3) Split netfs_rreq_unlock_folios() into two functions, one of which
contains the deprecated code for using PG_private_2 to avoid
accidentally doing the writeback path - and always use it if
USE_PGPRIV2 is set.
(4) As NETFS_ICTX_USE_PGPRIV2 is removed, make netfs_write_begin() always
wait for PG_private_2. This function is deprecated and only used by
ceph anyway, and so label it so.
(5) Drop the NETFS_RREQ_WRITE_TO_CACHE flag and use
fscache_operation_valid() on the cache_resources instead. This has
the advantage of picking up the result of netfs_begin_cache_read() and
fscache_begin_write_operation() - which are called after the object is
initialised and will wait for the cache to come to a usable state.
Just reverting ae678317b95e[1] isn't a sufficient fix, so this need to be
applied on top of that. Without this as well, things like:
rcu: INFO: rcu_sched detected expedited stalls on CPUs/tasks: {
and:
WARNING: CPU: 13 PID: 3621 at fs/ceph/caps.c:3386
may happen, along with some UAFs due to PG_private_2 not getting used to
wait on writeback completion.
Fixes: 2ff1e97587f4 ("netfs: Replace PG_fscache by setting folio->private and marking dirty")
Reported-by: Max Kellermann <max.kellermann@ionos.com>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Ilya Dryomov <idryomov@gmail.com>
cc: Xiubo Li <xiubli@redhat.com>
cc: Hristo Venev <hristo@venev.name>
cc: Jeff Layton <jlayton@kernel.org>
cc: Matthew Wilcox <willy@infradead.org>
cc: ceph-devel@vger.kernel.org
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
cc: linux-mm@kvack.org
Link: https://lore.kernel.org/r/3575457.1722355300@warthog.procyon.org.uk/ [1]
Link: https://lore.kernel.org/r/1173209.1723152682@warthog.procyon.org.uk
Signed-off-by: Christian Brauner <brauner@kernel.org>
The @inode parameter wasn't documented leading to new doc build
warnings.
Fixes: f89ea63f1c65 ("netfs, 9p: Fix race between umount and async request completion")
Link: https://lore.kernel.org/r/20240528133050.7e09d78e@canb.auug.org.au
Signed-off-by: Christian Brauner <brauner@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZlRqlgAKCRCRxhvAZXjc
os5tAQC6o3f2X39FooKv4bbbQkBXx5x8GqjUZyfnYjbm+Mak7wD/cf8tm4LLvVLt
1g7FbakWkEyQKhPRBMhtngX1GdKiuQI=
=Isax
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.10-rc2.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
- Fix io_uring based write-through after converting cifs to use the
netfs library
- Fix aio error handling when doing write-through via netfs library
- Fix performance regression in iomap when used with non-large folio
mappings
- Fix signalfd error code
- Remove obsolete comment in signalfd code
- Fix async request indication in netfs_perform_write() by raising
BDP_ASYNC when IOCB_NOWAIT is set
- Yield swap device immediately to prevent spurious EBUSY errors
- Don't cross a .backup mountpoint from backup volumes in afs to avoid
infinite loops
- Fix a race between umount and async request completion in 9p after 9p
was converted to use the netfs library
* tag 'vfs-6.10-rc2.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
netfs, 9p: Fix race between umount and async request completion
afs: Don't cross .backup mountpoint from backup volume
swap: yield device immediately
netfs: Fix setting of BDP_ASYNC from iocb flags
signalfd: drop an obsolete comment
signalfd: fix error return code
iomap: fault in smaller chunks for non-large folio mappings
filemap: add helper mapping_max_folio_size()
netfs: Fix AIO error handling when doing write-through
netfs: Fix io_uring based write-through
With the changes to folios/netfs it is now easier to reenable
swapfile support over SMB3 which fixes various xfstests
Reviewed-by: David Howells <dhowells@redhat.com>
Suggested-by: David Howells <dhowells@redhat.com>
Fixes: e1209d3a7a67 ("mm: introduce ->swap_rw and use it for reads from SWP_FS_OPS swap-space")
Signed-off-by: Steve French <stfrench@microsoft.com>
Fix to take the i_rwsem (through the netfs locking wrappers) before taking
cinode->lock_sem.
Fixes: 3ee1a1fc3981 ("cifs: Cut over to using netfslib")
Reported-by: Enzo Matsumiya <ematsumiya@suse.de>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Provide implementation of the netfslib hooks that will be used by netfslib
to ask cifs to set up and perform operations. Of particular note are
(*) cifs_clamp_length() - This is used to negotiate the size of the next
subrequest in a read request, taking into account the credit available
and the rsize. The credits are attached to the subrequest.
(*) cifs_req_issue_read() - This is used to issue a subrequest that has
been set up and clamped.
(*) cifs_prepare_write() - This prepares to fill a subrequest by picking a
channel, reopening the file and requesting credits so that we can set
the maximum size of the subrequest and also sets the maximum number of
segments if we're doing RDMA.
(*) cifs_issue_write() - This releases any unneeded credits and issues an
asynchronous data write for the contiguous slice of file covered by
the subrequest. This should possibly be folded in to all
->async_writev() ops and that called directly.
(*) cifs_begin_writeback() - This gets the cached writable handle through
which we do writeback (this does not affect writethrough, unbuffered
or direct writes).
At this point, cifs is not wired up to actually *use* netfslib; that will
be done in a subsequent patch.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Steve French <sfrench@samba.org>
cc: Shyam Prasad N <nspmangalore@gmail.com>
cc: Rohith Surabattula <rohiths.msft@gmail.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: linux-cifs@vger.kernel.org
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
cc: linux-mm@kvack.org
Use a hook in the new writeback code's retry algorithm to rotate the keys
once all the outstanding subreqs have failed rather than doing it
separately on each subreq.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Cut over to using the new writeback code. The old code is #ifdef'd out or
otherwise removed from compilation to avoid conflicts and will be removed
in a future patch.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
cc: Eric Van Hensbergen <ericvh@kernel.org>
cc: Latchesar Ionkov <lucho@ionkov.net>
cc: Dominique Martinet <asmadeus@codewreck.org>
cc: Christian Schoenebeck <linux_oss@crudebyte.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: v9fs@lists.linux.dev
cc: linux-afs@lists.infradead.org
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
The current netfslib writeback implementation creates writeback requests of
contiguous folio data and then separately tiles subrequests over the space
twice, once for the server and once for the cache. This creates a few
issues:
(1) Every time there's a discontiguity or a change between writing to only
one destination or writing to both, it must create a new request.
This makes it harder to do vectored writes.
(2) The folios don't have the writeback mark removed until the end of the
request - and a request could be hundreds of megabytes.
(3) In future, I want to support a larger cache granularity, which will
require aggregation of some folios that contain unmodified data (which
only need to go to the cache) and some which contain modifications
(which need to be uploaded and stored to the cache) - but, currently,
these are treated as discontiguous.
There's also a move to get everyone to use writeback_iter() to extract
writable folios from the pagecache. That said, currently writeback_iter()
has some issues that make it less than ideal:
(1) there's no way to cancel the iteration, even if you find a "temporary"
error that means the current folio and all subsequent folios are going
to fail;
(2) there's no way to filter the folios being written back - something
that will impact Ceph with it's ordered snap system;
(3) and if you get a folio you can't immediately deal with (say you need
to flush the preceding writes), you are left with a folio hanging in
the locked state for the duration, when really we should unlock it and
relock it later.
In this new implementation, I use writeback_iter() to pump folios,
progressively creating two parallel, but separate streams and cleaning up
the finished folios as the subrequests complete. Either or both streams
can contain gaps, and the subrequests in each stream can be of variable
size, don't need to align with each other and don't need to align with the
folios.
Indeed, subrequests can cross folio boundaries, may cover several folios or
a folio may be spanned by multiple folios, e.g.:
+---+---+-----+-----+---+----------+
Folios: | | | | | | |
+---+---+-----+-----+---+----------+
+------+------+ +----+----+
Upload: | | |.....| | |
+------+------+ +----+----+
+------+------+------+------+------+
Cache: | | | | | |
+------+------+------+------+------+
The progressive subrequest construction permits the algorithm to be
preparing both the next upload to the server and the next write to the
cache whilst the previous ones are already in progress. Throttling can be
applied to control the rate of production of subrequests - and, in any
case, we probably want to write them to the server in ascending order,
particularly if the file will be extended.
Content crypto can also be prepared at the same time as the subrequests and
run asynchronously, with the prepped requests being stalled until the
crypto catches up with them. This might also be useful for transport
crypto, but that happens at a lower layer, so probably would be harder to
pull off.
The algorithm is split into three parts:
(1) The issuer. This walks through the data, packaging it up, encrypting
it and creating subrequests. The part of this that generates
subrequests only deals with file positions and spans and so is usable
for DIO/unbuffered writes as well as buffered writes.
(2) The collector. This asynchronously collects completed subrequests,
unlocks folios, frees crypto buffers and performs any retries. This
runs in a work queue so that the issuer can return to the caller for
writeback (so that the VM can have its kswapd thread back) or async
writes.
(3) The retryer. This pauses the issuer, waits for all outstanding
subrequests to complete and then goes through the failed subrequests
to reissue them. This may involve reprepping them (with cifs, the
credits must be renegotiated, and a subrequest may need splitting),
and doing RMW for content crypto if there's a conflicting change on
the server.
[!] Note that some of the functions are prefixed with "new_" to avoid
clashes with existing functions. These will be renamed in a later patch
that cuts over to the new algorithm.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
cc: Eric Van Hensbergen <ericvh@kernel.org>
cc: Latchesar Ionkov <lucho@ionkov.net>
cc: Dominique Martinet <asmadeus@codewreck.org>
cc: Christian Schoenebeck <linux_oss@crudebyte.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: v9fs@lists.linux.dev
cc: linux-afs@lists.infradead.org
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Switch to using unsigned long long rather than loff_t in netfslib to avoid
problems with the sign flipping in the maths when we're dealing with the
byte at position 0x7fffffffffffffff.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
cc: Ilya Dryomov <idryomov@gmail.com>
cc: Xiubo Li <xiubli@redhat.com>
cc: netfs@lists.linux.dev
cc: ceph-devel@vger.kernel.org
cc: linux-fsdevel@vger.kernel.org
Use mempools for allocating requests and subrequests in an effort to make
sure that allocation always succeeds so that when performing writeback we
can always make progress.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
cc: linux-mm@kvack.org
Remove support for ->launder_folio() from netfslib and expect filesystems
to use filemap_invalidate_inode() instead. netfs_launder_folio() can then
be got rid of.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
cc: Eric Van Hensbergen <ericvh@kernel.org>
cc: Latchesar Ionkov <lucho@ionkov.net>
cc: Dominique Martinet <asmadeus@codewreck.org>
cc: Christian Schoenebeck <linux_oss@crudebyte.com>
cc: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: Steve French <sfrench@samba.org>
cc: Matthew Wilcox <willy@infradead.org>
cc: linux-mm@kvack.org
cc: linux-fsdevel@vger.kernel.org
cc: netfs@lists.linux.dev
cc: v9fs@lists.linux.dev
cc: linux-afs@lists.infradead.org
cc: ceph-devel@vger.kernel.org
cc: linux-cifs@vger.kernel.org
cc: devel@lists.orangefs.org
Make the netfs_io_request::subreq_counter, used to generate values for
netfs_io_subrequest::debug_index, into an atomic_t so that it can be called
from the retry thread at the same time as the app thread issuing writes.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Remove the PG_fscache alias for PG_private_2 and use the latter directly.
Use of this flag for marking pages undergoing writing to the cache should
be considered deprecated and the folios should be marked dirty instead and
the write done in ->writepages().
Note that PG_private_2 itself should be considered deprecated and up for
future removal by the MM folks too.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
cc: Matthew Wilcox (Oracle) <willy@infradead.org>
cc: Ilya Dryomov <idryomov@gmail.com>
cc: Xiubo Li <xiubli@redhat.com>
cc: Steve French <sfrench@samba.org>
cc: Paulo Alcantara <pc@manguebit.com>
cc: Ronnie Sahlberg <ronniesahlberg@gmail.com>
cc: Shyam Prasad N <sprasad@microsoft.com>
cc: Tom Talpey <tom@talpey.com>
cc: Bharath SM <bharathsm@microsoft.com>
cc: Trond Myklebust <trond.myklebust@hammerspace.com>
cc: Anna Schumaker <anna@kernel.org>
cc: netfs@lists.linux.dev
cc: ceph-devel@vger.kernel.org
cc: linux-cifs@vger.kernel.org
cc: linux-nfs@vger.kernel.org
cc: linux-fsdevel@vger.kernel.org
cc: linux-mm@kvack.org
When dirty data is being written to the cache, setting/waiting on/clearing
the fscache flag is always done in tandem with setting/waiting on/clearing
the writeback flag. The netfslib buffered write routines wait on and set
both flags and the write request cleanup clears both flags, so the fscache
flag is almost superfluous.
The reason it isn't superfluous is because the fscache flag is also used to
indicate that data just read from the server is being written to the cache.
The flag is used to prevent a race involving overlapping direct-I/O writes
to the cache.
Change this to indicate that a page is in need of being copied to the cache
by placing a magic value in folio->private and marking the folios dirty.
Then when the writeback code sees a folio marked in this way, it only
writes it to the cache and not to the server.
If a folio that has this magic value set is modified, the value is just
replaced and the folio will then be uplodaded too.
With this, PG_fscache is no longer required by the netfslib core, 9p and
afs.
Ceph and nfs, however, still need to use the old PG_fscache-based tracking.
To deal with this, a flag, NETFS_ICTX_USE_PGPRIV2, now has to be set on the
flags in the netfs_inode struct for those filesystems. This reenables the
use of PG_fscache in that inode. 9p and afs use the netfslib write helpers
so get switched over; cifs, for the moment, does page-by-page manual access
to the cache, so doesn't use PG_fscache and is unaffected.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
cc: Matthew Wilcox (Oracle) <willy@infradead.org>
cc: Eric Van Hensbergen <ericvh@kernel.org>
cc: Latchesar Ionkov <lucho@ionkov.net>
cc: Dominique Martinet <asmadeus@codewreck.org>
cc: Christian Schoenebeck <linux_oss@crudebyte.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: Ilya Dryomov <idryomov@gmail.com>
cc: Xiubo Li <xiubli@redhat.com>
cc: Steve French <sfrench@samba.org>
cc: Paulo Alcantara <pc@manguebit.com>
cc: Ronnie Sahlberg <ronniesahlberg@gmail.com>
cc: Shyam Prasad N <sprasad@microsoft.com>
cc: Tom Talpey <tom@talpey.com>
cc: Bharath SM <bharathsm@microsoft.com>
cc: Trond Myklebust <trond.myklebust@hammerspace.com>
cc: Anna Schumaker <anna@kernel.org>
cc: netfs@lists.linux.dev
cc: v9fs@lists.linux.dev
cc: linux-afs@lists.infradead.org
cc: ceph-devel@vger.kernel.org
cc: linux-cifs@vger.kernel.org
cc: linux-nfs@vger.kernel.org
cc: linux-fsdevel@vger.kernel.org
cc: linux-mm@kvack.org
An issue can occur between write-streaming (storing dirty data in partial
non-uptodate pages) and a cachefiles object being culled to make space.
The problem occurs because the cache object is only marked in use while
there are files open using it. Once it has been released, it can be culled
and the cookie marked disabled.
At this point, a streaming write is permitted to occur (if the cache is
active, we require pages to be prefetched and cached), but the cache can
become active again before this gets flushed out - and then two effects can
occur:
(1) The cache may be asked to write out a region that's less than its DIO
block size (assumed by cachefiles to be PAGE_SIZE) - and this causes
one of two debugging statements to be emitted.
(2) netfs_how_to_modify() gets confused because it sees a page that isn't
allowed to be non-uptodate being uptodate and tries to prefetch it -
leading to a warning that PG_fscache is set twice.
Fix this by the following means:
(1) Add a netfs_inode flag to disallow write-streaming to an inode and set
it if we ever do local caching of that inode. It remains set for the
lifetime of that inode - even if the cookie becomes disabled.
(2) If the no-write-streaming flag is set, then make netfs_how_to_modify()
always want to prefetch instead.
(3) If netfs_how_to_modify() decides it wants to prefetch a folio, but
that folio has write-streamed data in it, then it requires the folio
be flushed first.
(4) Export a counter of the number of times we wanted to prefetch a
non-uptodate page, but found it had write-streamed data in it.
(5) Export a counter of the number of times we cancelled a write to the
cache because it didn't DIO align and remove the debug statements.
Reported-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: linux-cachefs@redhat.com
cc: linux-erofs@lists.ozlabs.org
cc: linux-fsdevel@vger.kernel.org
cc: linux-mm@kvack.org
Rearrange the netfs_io_subrequest struct to put the netfs_io_request
pointer (rreq) first. This then allows netfs_io_subrequest to be put in a
union with a pointer to a wrapper around netfs_io_request. This will be
useful in the future for cifs and maybe ceph.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Steve French <sfrench@samba.org>
cc: Shyam Prasad N <nspmangalore@gmail.com>
cc: Rohith Surabattula <rohiths.msft@gmail.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: linux-cifs@vger.kernel.org
cc: linux-cachefs@redhat.com
cc: linux-fsdevel@vger.kernel.org
cc: linux-mm@kvack.org
Track the file position above which the server is not expected to have any
data (the "zero point") and preemptively assume that we can satisfy
requests by filling them with zeroes locally rather than attempting to
download them if they're over that line - even if we've written data back
to the server. Assume that any data that was written back above that
position is held in the local cache. Note that we have to split requests
that straddle the line.
Make use of this to optimise away some reads from the server. We need to
set the zero point in the following circumstances:
(1) When we see an extant remote inode and have no cache for it, we set
the zero_point to i_size.
(2) On local inode creation, we set zero_point to 0.
(3) On local truncation down, we reduce zero_point to the new i_size if
the new i_size is lower.
(4) On local truncation up, we don't change zero_point.
(5) On local modification, we don't change zero_point.
(6) On remote invalidation, we set zero_point to the new i_size.
(7) If stored data is discarded from the pagecache or culled from fscache,
we must set zero_point above that if the data also got written to the
server.
(8) If dirty data is written back to the server, but not fscache, we must
set zero_point above that.
(9) If a direct I/O write is made, set zero_point above that.
Assuming the above, any read from the server at or above the zero_point
position will return all zeroes.
The zero_point value can be stored in the cache, provided the above rules
are applied to it by any code that culls part of the local cache.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: linux-cachefs@redhat.com
cc: linux-fsdevel@vger.kernel.org
cc: linux-mm@kvack.org
Provide a flag whereby a filesystem may request that cifs_perform_write()
perform write-through caching. This involves putting pages directly into
writeback rather than dirty and attaching them to a write operation as we
go.
Further, the writes being made are limited to the byte range being written
rather than whole folios being written. This can be used by cifs, for
example, to deal with strict byte-range locking.
This can't be used with content encryption as that may require expansion of
the write RPC beyond the write being made.
This doesn't affect writes via mmap - those are written back in the normal
way; similarly failed writethrough writes are marked dirty and left to
writeback to retry. Another option would be to simply invalidate them, but
the contents can be simultaneously accessed by read() and through mmap.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: linux-cachefs@redhat.com
cc: linux-fsdevel@vger.kernel.org
cc: linux-mm@kvack.org
Make netfslib pass the maximum length to the ->prepare_write() op to tell
the cache how much it can expand the length of a write to. This allows a
write to the server at the end of a file to be limited to a few bytes
whilst writing an entire block to the cache (something required by direct
I/O).
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
cc: linux-cachefs@redhat.com
cc: linux-fsdevel@vger.kernel.org
cc: linux-mm@kvack.org
Provide an entry point to delegate a filesystem's ->page_mkwrite() to.
This checks for conflicting writes, then attached any netfs-specific group
marking (e.g. ceph snap) to the page to be considered dirty.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
cc: linux-cachefs@redhat.com
cc: linux-fsdevel@vger.kernel.org
cc: linux-mm@kvack.org
Institute a netfs write helper, netfs_file_write_iter(), to be pointed at
by the network filesystem ->write_iter() call. Make it handled buffered
writes by calling the previously defined netfs_perform_write() to copy the
source data into the pagecache.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
cc: linux-cachefs@redhat.com
cc: linux-fsdevel@vger.kernel.org
cc: linux-mm@kvack.org
Implement support for unbuffered writes and direct I/O writes. If the
write is misaligned with respect to the fscrypt block size, then RMW cycles
are performed if necessary. DIO writes are a special case of unbuffered
writes with extra restriction imposed, such as block size alignment
requirements.
Also provide a field that can tell the code to add some extra space onto
the bounce buffer for use by the filesystem in the case of a
content-encrypted file.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
cc: linux-cachefs@redhat.com
cc: linux-fsdevel@vger.kernel.org
cc: linux-mm@kvack.org
Implement support for unbuffered and DIO reads in the netfs library,
utilising the existing read helper code to do block splitting and
individual queuing. The code also handles extraction of the destination
buffer from the supplied iterator, allowing async unbuffered reads to take
place.
The read will be split up according to the rsize setting and, if supplied,
the ->clamp_length() method. Note that the next subrequest will be issued
as soon as issue_op returns, without waiting for previous ones to finish.
The network filesystem needs to pause or handle queuing them if it doesn't
want to fire them all at the server simultaneously.
Once all the subrequests have finished, the state will be assessed and the
amount of data to be indicated as having being obtained will be
determined. As the subrequests may finish in any order, if an intermediate
subrequest is short, any further subrequests may be copied into the buffer
and then abandoned.
In the future, this will also take care of doing an unbuffered read from
encrypted content, with the decryption being done by the library.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: linux-cachefs@redhat.com
cc: linux-fsdevel@vger.kernel.org
cc: linux-mm@kvack.org
Provide a netfs write helper, netfs_perform_write() to buffer data to be
written in the pagecache and mark the modified folios dirty.
It will perform "streaming writes" for folios that aren't currently
resident, if possible, storing data in partially modified folios that are
marked dirty, but not uptodate. It will also tag pages as belonging to
fs-specific write groups if so directed by the filesystem.
This is derived from generic_perform_write(), but doesn't use
->write_begin() and ->write_end(), having that logic rolled in instead.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: linux-cachefs@redhat.com
cc: linux-fsdevel@vger.kernel.org
cc: linux-mm@kvack.org
Dispatch one or more write reqeusts to process a writeback slice, where a
slice is tailored more to logical block divisions within the file (such as
crypto blocks, an object layout or cache granules) than the protocol RPC
maximum capacity.
The dispatch doesn't happen until throttling allows, at which point the
entire writeback slice is processed and queued. A slice may be written to
multiple destinations (one or more servers and the local cache) and the
writes to each destination might be split up along different lines.
The writeback slice holds the required folios pinned. An iov_iter is
provided in netfs_write_request that describes the buffer to be used. This
may be part of the pagecache, may have auxiliary padding pages attached or
may be a bounce buffer resulting from crypto or compression. Consequently,
the filesystem must not twiddle the folio markings directly.
The following API is available to the filesystem:
(1) The ->create_write_requests() method is called to ask the filesystem
to create the requests it needs. This is passed the writeback slice
to be processed.
(2) The filesystem should then call netfs_create_write_request() to create
the requests it needs.
(3) Once a request is initialised, netfs_queue_write_request() can be
called to dispatch it asynchronously, if not completed immediately.
(4) netfs_write_request_completed() should be called to note the
completion of a request.
(5) netfs_get_write_request() and netfs_put_write_request() are provided
to refcount a request. These take constants from the netfs_wreq_trace
enum for logging into ftrace.
(6) The ->free_write_request is method is called to ask the filesystem to
clean up a request.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
cc: linux-cachefs@redhat.com
cc: linux-fsdevel@vger.kernel.org
cc: linux-mm@kvack.org
Prepare to use folio->private to hold information write grouping and
streaming write. These are implemented in the same commit as they both
make use of folio->private and will be both checked at the same time in
several places.
"Write grouping" involves ordering the writeback of groups of writes, such
as is needed for ceph snaps. A group is represented by a
filesystem-supplied object which must contain a netfs_group struct. This
contains just a refcount and a pointer to a destructor.
"Streaming write" is the storage of data in folios that are marked dirty,
but not uptodate, to avoid unnecessary reads of data. This is represented
by a netfs_folio struct. This contains the offset and length of the
modified region plus the otherwise displaced write grouping pointer.
The way folio->private is multiplexed is:
(1) If private is NULL then neither is in operation on a dirty folio.
(2) If private is set, with bit 0 clear, then this points to a group.
(3) If private is set, with bit 0 set, then this points to a netfs_folio
struct (with bit 0 AND'ed out).
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
cc: linux-cachefs@redhat.com
cc: linux-fsdevel@vger.kernel.org
cc: linux-mm@kvack.org
Add a hook for netfslib's write helpers to call to tell the network
filesystem that it should update its i_size.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
cc: linux-cachefs@redhat.com
cc: linux-fsdevel@vger.kernel.org
cc: linux-mm@kvack.org
Modify the netfs_io_request struct to act as a point around which writes
can be coordinated. It represents and pins a range of pages that need
writing and a list of regions of dirty data in that range of pages.
If RMW is required, the original data can be downloaded into the bounce
buffer, decrypted if necessary, the modifications made, then the modified
data can be reencrypted/recompressed and sent back to the server.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
cc: linux-cachefs@redhat.com
cc: linux-fsdevel@vger.kernel.org
cc: linux-mm@kvack.org
Limit a subrequest to a maximum size and/or a maximum number of contiguous
physical regions. This permits, for instance, an subreq's iterator to be
limited to the number of DMA'able segments that a large RDMA request can
handle.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
cc: linux-cachefs@redhat.com
cc: linux-fsdevel@vger.kernel.org
cc: linux-mm@kvack.org
Add a function to work out how much of an ITER_BVEC or ITER_XARRAY iterator
we can use in a pagecount-limited and size-limited span. This will be
used, for example, to limit the number of segments in a subrequest to the
maximum number of elements that an RDMA transfer can handle.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
cc: linux-cachefs@redhat.com
cc: linux-fsdevel@vger.kernel.org
cc: linux-mm@kvack.org
Provide tools to create a buffer in an xarray, with a function to add new
folios with a mark. This will be used to create bounce buffer and can be
used more easily to create a list of folios the span of which would require
more than a page's worth of bio_vec structs.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
cc: linux-cachefs@redhat.com
cc: linux-fsdevel@vger.kernel.org
cc: linux-mm@kvack.org
Add a bvec array pointer and an iterator to netfs_io_request for either
holding a copy of a DIO iterator or a list of all the bits of buffer
pointed to by a DIO iterator.
There are two problems: Firstly, if an iovec-class iov_iter is passed to
->read_iter() or ->write_iter(), this cannot be passed directly to
kernel_sendmsg() or kernel_recvmsg() as that may cause locking recursion if
a fault is generated, so we need to keep track of the pages involved
separately.
Secondly, if the I/O is asynchronous, we must copy the iov_iter describing
the buffer before returning to the caller as it may be immediately
deallocated.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
cc: linux-cachefs@redhat.com
cc: linux-fsdevel@vger.kernel.org
cc: linux-mm@kvack.org
Add three iov_iter structs:
(1) Add an iov_iter (->iter) to the I/O request to describe the
unencrypted-side buffer.
(2) Add an iov_iter (->io_iter) to the I/O request to describe the
encrypted-side I/O buffer. This may be a different size to the buffer
in (1).
(3) Add an iov_iter (->io_iter) to the I/O subrequest to describe the part
of the I/O buffer for that subrequest.
This will allow future patches to point to a bounce buffer instead for
purposes of handling oversize writes, decryption (where we want to save the
encrypted data to the cache) and decompression.
These iov_iters persist for the lifetime of the (sub)request, and so can be
accessed multiple times without worrying about them being deallocated upon
return to the caller.
The network filesystem must appropriately advance the iterator before
terminating the request.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: linux-cachefs@redhat.com
cc: linux-fsdevel@vger.kernel.org
cc: linux-mm@kvack.org
Borrow NFS's direct-vs-buffered I/O locking into netfslib. Similar code is
also used in ceph.
Modify it to have the correct checker annotations for i_rwsem lock
acquisition/release and to return -ERESTARTSYS if waits are interrupted.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
cc: linux-cachefs@redhat.com
cc: linux-fsdevel@vger.kernel.org
cc: linux-mm@kvack.org
Provide default invalidate_folio and release_folio calls. These will need
to interact with invalidation correctly at some point. They will be needed
if netfslib is to make use of folio->private for its own purposes.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
cc: linux-cachefs@redhat.com
cc: linux-fsdevel@vger.kernel.org
cc: linux-mm@kvack.org
