On s3 resume the i8042 driver tries to restore the controller to a known
state by reinitializing things, however this can confuse the controller
with different effects. Mostly occasionally unresponsive keyboards after
resume.
These issues do not rise on s0ix resume as here the controller is assumed
to preserved its state from before suspend.
This patch adds a quirk for devices where the reinitialization on s3 resume
is not needed and might be harmful as described above. It does this by
using the s0ix resume code path at selected locations.
This new quirk goes beyond what the preexisting reset=never quirk does,
which only skips some reinitialization steps.
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Cc: stable@vger.kernel.org
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240104183118.779778-2-wse@tuxedocomputers.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
From: Dmitry Torokhov <dmitry.torokhov@gmail.com>
When exercising uinput interface syzkaller may try setting up device
with a really large number of slots, which causes memory allocation
failure in input_mt_init_slots(). While this allocation failure is
handled properly and request is rejected, it results in syzkaller
reports. Additionally, such request may put undue burden on the
system which will try to free a lot of memory for a bogus request.
Fix it by limiting allowed number of slots to 100. This can easily
be extended if we see devices that can track more than 100 contacts.
Reported-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reported-by: syzbot <syzbot+0122fa359a69694395d5@syzkaller.appspotmail.com>
Closes: https://syzkaller.appspot.com/bug?extid=0122fa359a69694395d5
Link: https://lore.kernel.org/r/Zqgi7NYEbpRsJfa2@google.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The driver supports the FT8201 chip as well. It registers up to 10 touch
points.
Tested on: Lenovo ThinkSmart View (CD-18781Y), LCM: BOE TV080WXM-LL4
Signed-off-by: Felix Kaechele <felix@kaechele.ca>
Link: https://lore.kernel.org/r/20240804031310.331871-3-felix@kaechele.ca
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The abs-fuzz and abs-flat properties are documented as optional. When
these are absent, fwnode_property_read_u32() will leave the input
unchanged, meaning that an axis either picks up the value for the
previous axis or an uninitialized value.
Explicitly set these values to zero when they are unspecified to match
the documented behaviour in the device tree bindings.
Signed-off-by: John Keeping <jkeeping@inmusicbrands.com>
Link: https://lore.kernel.org/r/20240731093310.3696919-1-jkeeping@inmusicbrands.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The kernel reports that the touchpad for this device can support a
different bus.
With SMBus enabled the touchpad movement is smoother and three-finger
gestures are recognized.
Signed-off-by: Jonathan Denose <jdenose@google.com>
Link: https://lore.kernel.org/r/20240719180612.1.Ib652dd808c274076f32cd7fc6c1160d2cf71753b@changeid
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
In case the touch controller is not connected, this message keeps scrolling
on the console indefinitelly. Ratelimit it to avoid filling kernel logs.
"
ads7846 spi2.1: spi_sync --> -22
"
Signed-off-by: Marek Vasut <marex@denx.de>
Link: https://lore.kernel.org/r/20240708211913.171243-1-marex@denx.de
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The locking rules in the driver came from era when sysfs attributes
could live past the point of time when device would be unbound from
the driver, and so used module-global semaphore (potentially shared
between multiple yealink devices). Thankfully these times are long
gone and attributes will not be accessible once they are removed.
Simplify the logic by moving to per-device mutex, stop checking if
there is driver data instance attached to the interface, and use
guard notation to acquire the mutex.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20240710234855.311366-2-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Instead of manually creating driver-specific device attributes
set struct usb_driver->dev_groups pointer to have the driver core
do it.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20240710234855.311366-1-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Instead of manually creating driver-specific device attributes
set struct usb_driver->dev_groups pointer to have the driver core
do it.
Reviewed-by: Ville Syrjälä <syrjala@sci.fi>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/Zo8gaF_lKPAfcye1@google.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Instead of manually creating driver-specific device attributes
set struct driver->dev_groups pointer to have the driver core
do it.
This also fixes issue with the attribute not being deleted on driver
unbind.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/Zo9nofWJ1xg9MgKs@google.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Instead of manually creating driver-specific device attributes,
set struct driver->dev_groups pointer to have the driver core
do it.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/Zo9kSFeGOZB9b3rq@google.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Do not use kernel-doc style for comment describing contents of the
source file, as it trips the script:
scripts/kernel-doc -none drivers/input/misc/twl4030-pwrbutton.c
drivers/input/misc/twl4030-pwrbutton.c:2: info: Scanning doc for function twl4030
drivers/input/misc/twl4030-pwrbutton.c:33: warning: expecting prototype for twl4030(). Prototype was for PWR_PWRON_IRQ() instead
1 warnings
Also remove file name from the same comment - it it not the best idea
to have it as they tend to get stale when sources get moved or renamed.
Reported-by: Mirsad Todorovac <mtodorovac69@gmail.com>
Tested-by: Mirsad Todorovac <mtodorovac69@gmail.com>
Link: https://lore.kernel.org/r/Zo3QE00GqCrA3M9b@google.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The HX83100A is a bit of an outlier in the Himax HX831xxx series of
touch controllers as it requires reading touch events through the AHB
interface of the MCU rather than providing a dedicated FIFO address like
the other chips do.
This patch implements the specific read function and introduces the
HX83100A chip with an appropriate i2c ID and DT compatible string.
The HX83100A doesn't have a straightforward way to do chip
identification, which is why it is not implemented in this patch.
Tested on: Lenovo ThinkSmart View (CD-18781Y) / Innolux P080DDD-AB2 LCM
Signed-off-by: Felix Kaechele <felix@kaechele.ca>
Tested-by: Paul Gale <paul@siliconpixel.com>
Link: https://lore.kernel.org/r/20240620145019.156187-6-felix@kaechele.ca
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
In preparation for HX83100A support allow defining separate functions
for specific chip operations.
Signed-off-by: Felix Kaechele <felix@kaechele.ca>
Link: https://lore.kernel.org/r/20240620145019.156187-5-felix@kaechele.ca
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Implement reading from the MCU in a more universal fashion. This allows
properly handling reads of more than 4 bytes using the AHB FIFO
implemented in the chip.
Signed-off-by: Felix Kaechele <felix@kaechele.ca>
Link: https://lore.kernel.org/r/20240620145019.156187-4-felix@kaechele.ca
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Now that the input_dev->vals array is always there we can be assured
that input_pass_values() is always called with a non-0 number of
events. Remove the check.
Reviewed-by: Jeff LaBundy <jeff@labundy.com>
Reviewed-by: Benjamin Tissoires <bentiss@kernel.org>
Link: https://lore.kernel.org/r/20240703213756.3375978-8-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Preallocate memory for holding event values (input_dev->vals) so that
there is no need to check if it was allocated or not in the event
processing code.
The amount of memory will be adjusted after input device has been fully
set up upon registering device with the input core.
Reviewed-by: Jeff LaBundy <jeff@labundy.com>
Reviewed-by: Benjamin Tissoires <bentiss@kernel.org>
Link: https://lore.kernel.org/r/20240703213756.3375978-7-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
In preparation to have dev->vals memory pre-allocated rearrange
code in input_alloc_device() so that it allows handling multiple
points of failure.
Reviewed-by: Jeff LaBundy <jeff@labundy.com>
Reviewed-by: Benjamin Tissoires <bentiss@kernel.org>
Link: https://lore.kernel.org/r/20240703213756.3375978-6-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Streamline event handling code by providing batch implementations for
filtering and event processing and using them in place of the main
event handler, as needed, instead of having complex branching logic
in the middle of the event processing code.
Reviewed-by: Jeff LaBundy <jeff@labundy.com>
Reviewed-by: Benjamin Tissoires <bentiss@kernel.org>
Link: https://lore.kernel.org/r/20240703213756.3375978-5-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
In preparation to consolidating filtering and event processing in the
input core change events() method to return number of events processed
by it.
Reviewed-by: Jeff LaBundy <jeff@labundy.com>
Reviewed-by: Benjamin Tissoires <bentiss@kernel.org>
Link: https://lore.kernel.org/r/20240703213756.3375978-4-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Input core expects input handlers to be either filters, or regular
handlers, but not both. Additionally, for regular handlers it does
not make sense to define both single event method and batch method.
Refuse registering handler if it defines more than one method.
Reviewed-by: Jeff LaBundy <jeff@labundy.com>
Reviewed-by: Benjamin Tissoires <bentiss@kernel.org>
Link: https://lore.kernel.org/r/20240703213756.3375978-3-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Input core favors ->events() (batch) method over ->event() method
if the former is defined, so there is no point in defining evdev_event()
as it is never called. Remove it.
Reviewed-by: Jeff LaBundy <jeff@labundy.com>
Reviewed-by: Benjamin Tissoires <bentiss@kernel.org>
Link: https://lore.kernel.org/r/20240703213756.3375978-2-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Imagis IST3038 is another variant of Imagis IST3038 IC, which has
a different register interface from IST3038C (possibly firmware defined).
Unlike IST3038C/IST3032C, IST3038 has different registers for commands,
which means IST3038 doesn't use protocol B.
Similar to IST3032C and maybe the other variants, IST3038 has touch keys
support, which provides KEY_APPSELECT and KEY_BACK.
Add support for IST3038 with touch keys.
Signed-off-by: Raymond Hackley <raymondhackley@protonmail.com>
Link: https://lore.kernel.org/r/20240613025631.5425-4-raymondhackley@protonmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
protocol_b is a property, which tells Imagis panel to use a different
format for coordinates.
IST30XXC series is known for using protocol B, while the other series
aren't. Note this could be confusing, unlike the model name implies.
Adjust the usage of protocol_b to avoid confusion.
Signed-off-by: Raymond Hackley <raymondhackley@protonmail.com>
Link: https://lore.kernel.org/r/20240613025631.5425-2-raymondhackley@protonmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
When dealing with byte data use u8 instead of unsigned char or int.
Stop layering error handling in cypress_ps2_sendbyte() and simply
pass on error code from ps2_sendbyte().
Additionally use u8 instead of unisgned char throughout the code.
Link: https://lore.kernel.org/r/20240628224728.2180126-5-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Do not override errors reported by lower layers with generic "-1",
but propagate them to the callers. Change the checks for errors to be
in the form of "if (error)" to maintain consistency.
Link: https://lore.kernel.org/r/20240628224728.2180126-4-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Stop layering error handling in cypress_ps2_sendbyte() and simply
pass on error code from ps2_sendbyte() and use it in the callers.
This fixes mishandling of error condition in
cypress_ps2_read_cmd_status() which expects errors to be negative.
Reported-by: Igor Artemiev <Igor.A.Artemiev@mcst.ru>
Link: https://lore.kernel.org/r/20240628224728.2180126-2-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Casting an integer field containing desired rate to a pointer to bytes
works on little endian architectures where the driver is used, but not
a good practice. Use a temporary of proper type instead.
Link: https://lore.kernel.org/r/20240628224728.2180126-1-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Make sure interrupts are not left disabled when we fail to suspend the
touch controller.
Fixes: 6696777c6506 ("Input: add driver for Elan I2C/SMbus touchpad")
Link: https://lore.kernel.org/r/ZmKiiL-1wzKrhqBj@google.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Allocating a contiguous buffer of 64K may fail if memory is sufficiently
fragmented, and may cause OOM kill of an unrelated process. However we
do not need to have contiguous memory. We also do not need to zero
out the buffer since it will be overwritten with firmware data.
Switch to using kvmalloc() instead of kzalloc().
Link: https://lore.kernel.org/r/20240609234757.610273-1-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Switch the driver to use guard notation when acquiring mutex to
have it released automatically.
Link: https://lore.kernel.org/r/Zmkyvkr9AFyywy1V@google.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
If the device is missing, we get the following error:
qt1050 3-0041: ID -1340767592 not supported
Let's handle this situation and print more informative error
when reading of CHIP_ID fails:
qt1050 3-0041: Failed to read chip ID: -6
Fixes: cbebf5addec1 ("Input: qt1050 - add Microchip AT42QT1050 support")
Signed-off-by: Andrei Lalaev <andrei.lalaev@anton-paar.com>
Reviewed-by: Marco Felsch <m.felsch@pengutronix.de>
Link: https://lore.kernel.org/r/20240617183018.916234-1-andrey.lalaev@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
As ft5426 seems to be compatible with this driver, add it.
Debug output during identification: Model "generic ft5x06 (79)", Rev. "
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
Link: https://lore.kernel.org/r/20240501204758.758537-3-andreas@kemnade.info
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Add handling of HSYNC signal emitted by the TI ADS7846 if it is hooked
up to a GPIO.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20240430-gpio-leds-miscarm-v1-3-9c94d7711f6c@linaro.org
[dtor: dropped Spitz changes, kept platform data wait_for_sync option]
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
There is no need to allocate axes information separately from the main
joystick structure so let's fold the allocation and also drop members
(such as range, flat and fuzz) that are only used during initialization
of the device.
Acked-by: Artur Rojek <contact@artur-rojek.eu>
Link: https://lore.kernel.org/r/ZmkrgTlxNwm_oHxv@google.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
