To verify that Auto Update is possible, the mpfs_auto_update_state()
function performs a "Query Security Service Request" to the system
controller.
Previously, the check was performed on the first element of the
response message, which was accessed using a 32-bit pointer. This
caused the bitwise operation to reference incorrect data, as the
response should be inspected at the byte level. Fixed this by casting
the response to a u8 * pointer, ensuring the check correctly inspects
the appropriate byte of the response message.
Additionally, rename "UL_Auto Update" to "UL_IAP" to match the
PolarFire Family System Services User Guide.
Signed-off-by: Valentina Fernandez <valentina.fernandezalanis@microchip.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Here is the "big and hairy" char/misc/iio and other small driver
subsystem updates for 6.13-rc1. Sorry for doing this at the end of the
merge window, conference and holiday travel got in the way on my side
(hence the 5am pull request emails...)
Loads of things in here, and even a fun merge conflict!
- rust misc driver bindings and other rust changes to make misc
drivers actually possible. I think this is the tipping point,
expect to see way more rust drivers going forward now that these
bindings are present. Next merge window hopefully we will have pci
and platform drivers working, which will fully enable almost all
driver subsystems to start accepting (or at least getting) rust
drivers. This is the end result of a lot of work from a lot of
people, congrats to all of them for getting this far, you've proved
many of us wrong in the best way possible, working code :)
- IIO driver updates, too many to list individually, that subsystem
keeps growing and growing...
- Interconnect driver updates
- nvmem driver updates
- pwm driver updates
- platform_driver::remove() fixups, loads of them
- counter driver updates
- misc driver updates (keba?)
- binder driver updates and fixes
- loads of other small char/misc/etc driver updates and additions,
full details in the shortlog.
Note, there is a semi-hairy rust merge conflict when pulling this. The
resolution has been in linux-next for a while and can be seen here:
https://lore.kernel.org/all/20241111173459.2646d4af@canb.auug.org.au/
All of these have been in linux-next for a while, with no other reported
issues other than that merge conflict.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZ0lGpg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykKHQCgvI4Muu2tpdINBVe24Zc8S3ozg0AAnRNg3F7r
ikneftUDYtuviSGU/Rs8
=CW+i
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc/IIO/whatever driver subsystem updates from Greg KH:
"Here is the 'big and hairy' char/misc/iio and other small driver
subsystem updates for 6.13-rc1.
Loads of things in here, and even a fun merge conflict!
- rust misc driver bindings and other rust changes to make misc
drivers actually possible.
I think this is the tipping point, expect to see way more rust
drivers going forward now that these bindings are present. Next
merge window hopefully we will have pci and platform drivers
working, which will fully enable almost all driver subsystems to
start accepting (or at least getting) rust drivers.
This is the end result of a lot of work from a lot of people,
congrats to all of them for getting this far, you've proved many of
us wrong in the best way possible, working code :)
- IIO driver updates, too many to list individually, that subsystem
keeps growing and growing...
- Interconnect driver updates
- nvmem driver updates
- pwm driver updates
- platform_driver::remove() fixups, loads of them
- counter driver updates
- misc driver updates (keba?)
- binder driver updates and fixes
- loads of other small char/misc/etc driver updates and additions,
full details in the shortlog.
All of these have been in linux-next for a while, with no other
reported issues other than that merge conflict"
* tag 'char-misc-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (401 commits)
mei: vsc: Fix typo "maintstepping" -> "mainstepping"
firmware: Switch back to struct platform_driver::remove()
misc: isl29020: Fix the wrong format specifier
scripts/tags.sh: Don't tag usages of DEFINE_MUTEX
fpga: Switch back to struct platform_driver::remove()
mei: vsc: Improve error logging in vsc_identify_silicon()
mei: vsc: Do not re-enable interrupt from vsc_tp_reset()
dt-bindings: spmi: qcom,x1e80100-spmi-pmic-arb: Add SAR2130P compatible
dt-bindings: spmi: spmi-mtk-pmif: Add compatible for MT8188
spmi: pmic-arb: fix return path in for_each_available_child_of_node()
iio: Move __private marking before struct element priv in struct iio_dev
docs: iio: ad7380: add adaq4370-4 and adaq4380-4
iio: adc: ad7380: add support for adaq4370-4 and adaq4380-4
iio: adc: ad7380: use local dev variable to shorten long lines
iio: adc: ad7380: fix oversampling formula
dt-bindings: iio: adc: ad7380: add adaq4370-4 and adaq4380-4 compatible parts
bus: mhi: host: pci_generic: Use pcim_iomap_region() to request and map MHI BAR
bus: mhi: host: Switch trace_mhi_gen_tre fields to native endian
misc: atmel-ssc: Use of_property_present() for non-boolean properties
misc: keba: Add hardware dependency
...
After commit 0edb555a65d1 ("platform: Make platform_driver::remove()
return void") .remove() is (again) the right callback to implement for
platform drivers.
Convert all platform drivers below drivers/firmware to use .remove(),
with the eventual goal to drop struct platform_driver::remove_new(). As
.remove() and .remove_new() have the same prototypes, conversion is done
by just changing the structure member name in the driver initializer.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://lore.kernel.org/r/36974feb6035201d53384557259ec72fe311053b.1731397962.git.u.kleine-koenig@baylibre.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
fw_upload's poll_complete() is really intended for use with
asynchronous write() implementations - or at least those where the
write() loop may terminate without the kernel yet being aware of whether
or not the firmware upload has succeeded. For auto-update, write() is
only ever called once and will only return when uploading has completed,
be that by passing or failing. The core fw_upload code only calls
poll_complete() after the final call to write() has returned.
However, the poll_complete() implementation in the auto-update driver
was written to expect poll_complete() to be called from another context,
and it waits for a completion signalled from write(). Since
poll_complete() is actually called from the same context, after the
write() loop has terminated, wait_for_completion() never sees the
completion get signalled and always times out, causing programming to
always report a failing.
Since write() is full synchronous, and its return value will indicate
whether or not programming passed or failed, poll_complete() serves no
purpose and can be cut down to simply return FW_UPLOAD_ERR_NONE.
Cc: stable@vger.kernel.org
Fixes: ec5b0f1193ad4 ("firmware: microchip: add PolarFire SoC Auto Update support")
Reported-by: Jamie Gibbons <jamie.gibbons@microchip.com>
Tested-by: Jamie Gibbons <jamie.gibbons@microchip.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
After successfully programming the SPI flash with an MFPS auto update
image, the error sysfs attribute reports programming:timeout.
This is caused by an incorrect check on the return value from
wait_for_completion_timeout() in mpfs_auto_update_poll_complete().
Fixes: ec5b0f1193ad ("firmware: microchip: add PolarFire SoC Auto Update support")
Signed-off-by: Steve Wilkins <steve.wilkins@raymarine.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
There's a bunch of structs created and freed every time the mailbox is
used. Move them to use the scope-based cleanup infrastructure to avoid
manually tearing them down. mpfs_auto_update_available() didn't free the
memory that it used (albeit it allocated exactly once during probe) so
that gets moved over too.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
This buffer is used exclusively by mpfs_auto_update_set_image_address(),
so move the management of it there, employing the recently added cleanup
infrastructure to avoid littering the function with gotos.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
As it says on the tin. It can be kinda confusing when "22830" is in hex,
so prefix the hex numbers with a "0x".
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
If validation fails, both prints are made. Skip the success one in the
failure case.
Fixes: ec5b0f1193ad ("firmware: microchip: add PolarFire SoC Auto Update support")
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
A single minor fix for an oversized allocation due to sizeof() misuse by
yours truly that came in since I sent my last fixes PR.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRh246EGq/8RLhDjO14tDGHoIJi0gUCZed5RAAKCRB4tDGHoIJi
0qRIAQCeMKuoQNOHXQtC3u5FKGcpsZPctEnbhg2pWK6ZOwdqjwEAsEJLqApFw4cG
oB9cR3O3mtN49aOBM3w700Hafykv9Ak=
=oU9U
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=OVem
-----END PGP SIGNATURE-----
Merge tag 'riscv-firmware-for-v6.9' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux into arm/fixes
RISC-V firmware drivers for v6.9
A single minor fix for an oversized allocation due to sizeof() misuse by
yours truly that came in since I sent my last fixes PR.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
* tag 'riscv-firmware-for-v6.9' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux:
firmware: microchip: Fix over-requested allocation size
Link: https://lore.kernel.org/r/20240305-vicinity-dumpling-8943ef26f004@spud
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
cocci warnings: (new ones prefixed by >>)
>> drivers/firmware/microchip/mpfs-auto-update.c:387:72-78:
ERROR: application of sizeof to pointer
drivers/firmware/microchip/mpfs-auto-update.c:170:72-78:
ERROR: application of sizeof to pointer
response_msg is a pointer to u32, so the size of element it points to is
supposed to be a multiple of sizeof(u32), rather than sizeof(u32 *).
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202403040516.CYxoWTXw-lkp@intel.com/
Signed-off-by: Dawei Li <dawei.li@shingroup.cn>
Fixes: ec5b0f1193ad ("firmware: microchip: add PolarFire SoC Auto Update support")
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
response_msg is a pointer to an unsigned int (u32). So passing just
response_msg to sizeof would not print the size of the variable. To get
the size of response_msg we need to pass it as a pointer variable.
Fixes: ec5b0f1193ad ("firmware: microchip: add PolarFire SoC Auto Update support")
Signed-off-by: Samasth Norway Ananda <samasth.norway.ananda@oracle.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it was merged into the regular platform bus.
As part of that merge prepping Arm DT support 13 years ago, they
"temporarily" include each other. They also include platform_device.h
and of.h. Soon the implicit includes are going to be removed.
of_device.h isn't needed, but platform_device.h is.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Add support for Auto Update reprogramming of the FPGA fabric on
PolarFire SoC, using the fw_upload mechanism a la the
intel-m10-bmc-sec-update driver.
This driver only writes the image to the spi flash & performs
validation on it, as the entire FPGA becomes unusable during the actual
reprogramming of a bitstream. To initiate the reprogramming itself, a
device reset is required. The SBI SRST extension's "cold reboot" can
trigger such a device reset, provided corresponding support has been
enabled in the HSS (Hart Software Services), the provider of SBI runtime
services on PolarFire SoC.
While this is a driver responsible for the reprogramming of an FPGA,
there is no dynamic discovery of devices involved, as runtime
reconfiguration is not possible due to the device reset requirements.
Therefore FPGA manager subsystem is not used by this driver and the FPGA
subsystem maintainers were unwilling to accept it there.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
