mach/serial.h is only included from arch/arm/mach-omap2/serial.h,
and the other two files are unused and empty.
Remove the directory by relocating the contents of mach/serial.h
and dropping all other references.
Reviewed-by: Tony Lindgren <tony@atomide.com>
Tested-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The ap_init_early function is defined a global but has no declaration,
so it produces a warning:
arch/arm/mach-versatile/integrator_ap.c:148:13: warning: no previous prototype for 'ap_init_early' [-Wmissing-prototypes
The function could be made 'static' but since it's empty, we can
just remove it.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This is the full series for converting OMAP1 to multiplatform, rebased
from my 2019 attempt to do the same thing. The soc tree contains simpler
patches to do the same for iop32x, ixp4xx, ep93xx and s3c24xx, which
means we are getting closer to completing this for all ARMv5 platforms
(I have patches for PXA, which is the last one remaining).
Janusz already tested the branch separately and did the missing work
for the common-clk conversion after my previous approach was broken.
Aaro found one regression during additional testing, this is fixed now.
Acked-by: Tony Lindgren <tony@atomide.com>
Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The include directory is gone, so stop passing the command line flag.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Various spelling mistakes in comments.
Detected with the help of Coccinelle.
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Reviewed-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Various spelling mistakes in comments.
Detected with the help of Coccinelle.
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Reviewed-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
There are some OMAP1 clock code bits that have no effect:
- crystal_type variable is set to 0 but never changed, then
crystal_type == 2 condition is never true and ck_ref.rate never set to
19200000,
- clk->ops->allow_idle() is called from omap_clk_enable_autoidle_all() but
that op is not configured for any clock, then the function does nothing
and the op field is not needed,
- ENABLE_ON_INIT flag is set for some clocks but is never checked by any
code, then not needed.
Drop that code.
Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The code of OMAP1 clocks contains quite a few unused elements:
- functions and function like macros never called: clk_reparent(),
recalculate_root_clocks(), clk_enable_init_clocks(),
omap_clk_get_by_name(), omap_clk_disable_autoidle_all(),
__clk_get_parent(clk), __clk_get_rate(),
- unused structure fields:
- clkops: .find_idlest(), .find_companion(), .deny_idle(),
- clk: .src_offset, as well as .clkdm -- no longer present but still
mentioned in comments,
- definitions of unused flags: INVERT_ENABLE, CLOCK_CLKOUTX2,
- definitions of unused data types: struct clk_functions,
- prototypes of functions with no implementation: clk_init(),
omap1_watchdog_recalc().
- declarations of never defined global variables: clkops_dummy.
Drop them.
Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Since its introduction to the mainline kernel, omap1_uart_recalc() helper
makes incorrect use of clk->enable_bit as a ready to use bitmap mask while
it only provides the bit number. Fix it.
Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Commit ef772f2ee31e ("ARM: OMAP: Fix CONFIG_DEBUG_LL") was supposed to fix
low level debugging, most possibly by early enabling UART clocks. The fix
actually introduced early reset of most bits of MOD_CONF_CTRL_0 register,
with the exception of UART1 and UART2 clock related bits which were set
high. However, UART1 clock bit can play different roles on different
OMAP1 variants. On OMAP1610 it enables the clock as intended, but on
OMAP1510 it switches the clock rate from 12 to 48 MHz. Even worth, for
UART2 the bit changes its clock rate also on OMAP1610. As a result, UART
rates set by a bootloader can be unintentionally changed early on kernel
boot and low level debugging broken, not fixed. Besides, reset of all
other bits was not justified.
Don't touch register bits not related to UART clocks. Also, don't touch
the bit of UART2 clock. Make sure UART1 and UART3 are enabled early on
relevant OMAP1610 machine types while preserving bootloader UART clock
rates on others.
Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
In preparation for conversion of OMAP1 clocks to common clock framework,
identify arch/arm/mach-omap1 local users of those clocks and update them
to call clk_prepare_enable/clk_disable_unprepare() instead of just
clk_enable/disable(), as required by CCF implementation of clock API.
Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
In a multiplatform randconfig kernel, one can have
CONFIG_ARCH_OMAP1 enabled, but none of the specific SoCs.
This leads to some build issues as the code is not
meant to deal with this configuration at the moment:
arch/arm/mach-omap1/io.c:86:20: error: unused function 'omap1_map_common_io' [-Werror,-Wunused-function]
arch/arm/mach-omap1/pm.h:113:2: error: "Power management for this processor not implemented yet" [-Werror,-W#warnings]
Use the same trick as on OMAP2 and guard the actual compilation
of platform code with another Makefile ifdef check based
on an option that depends on having at least one SoC enabled.
The io.c file still needs to get compiled to allow building
device drivers with a dependency on CONFIG_ARCH_OMAP1.
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Most of the header files are no longer referenced from outside
arch/arm/mach-omap1, so move them all to that place directly
and change their users to use the new location.
The exceptions are:
- mach/compress.h is used by the core architecture code
- mach/serial.h is used by mach/compress.h
The mach/memory.h is empty and gets removed in the process,
avoiding the need for CONFIG_NEED_MACH_MEMORY_H.
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The ISA I/O space handling in omap_cf is incompatible with
PCI drivers in a multiplatform kernel, and requires a custom
mach/io.h.
Change the driver to use pci_remap_iospace() like PCI drivers do,
so the generic ioport access can work across platforms.
To actually use that code, we have to select CONFIG_PCI
here.
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The address range 0xfee00000-0xfeffffff is used for PCI and
PCMCIA I/O port mappings, but OMAP1 has its static mappings
there as well.
Move the OMAP1 addresses a little higher to avoid crashing
at boot.
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The last file in this directory is gone, and it can be removed as well.
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The sram initialization code is the only shared omap1/2 code that
is not a standalone driver, but it is very short. Having two copies
of this code means some duplication of the sources, but actually
saves object code size as it can be inlined better.
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
All the remaining features in here are either omap1
or omap2plus specific, so move them into the respective
Kconfig files.
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Most of the interface functions in plat/dma.c are only used from the
USB driver, which is practically OMAP1 specific, except for compile
testing.
The omap_get_plat_info(), omap_request_dma() and omap_free_dma()
functions are never called on omap2 because of runtime checks.
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
No part of plat-omap/dma.c is called on omap2 any more, so
anything omap2 specific in here can simply be removed.
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The Samsung S3C24xx and S3C64xx platforms are very old designs. S3C2416
was introduced in 2008 and S3C6410 in 2009/2010. They are not widely
available anymore - out-of-stock on FriendlyArm (one of manufacturers of
boards) and only few specialist stores still offer them for quite a high
price.
The community around these platforms was not very active, so I suspect
no one really uses them anymore. Maintenance takes precious time so
there is little sense in keeping them alive if there are no real users.
Let's mark all S3C24xx and S3C64xx platforms as deprecated and mention
possible removal in after 2022 for the first and 2024 for the lattere.
The deprecation message will be as text in Kconfig, build message (not a
warning though) and runtime print error.
If there are any users, they might respond and postpone the removal.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Tomasz Figa <tomasz.figa@gmail.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20220407072319.75614-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Most of the plat-omap/dma.c code is specific to the USB
driver. Hide that code when it is not in use, to make it
clearer which parts are actually still required.
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
It has been impossible to select this driver for six years
without anyone noticing, so just kill it completely.
Fixes: 54ea18e8866a ("ARM: OMAP2+: Remove board file for H4")
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
omap2 stopped using this code with commit 8d39ff3d1696 ("ARM: OMAP2+:
Remove unused legacy code for timer"), so just move it to mach-omap1 now,
along with the other half of that driver.
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The innovator board needs a special case for its phy control.
Move the corresponding code into the board file and out of the
common code by adding another callback.
Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
There is only one board that uses the omap_cf driver, so
moving the chipselect configuration there does not lead
to code duplication but avoids the use of mach/tc.h
in drivers.
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The driver has always had a FIXME about this, and it seems
like this trivial code move avoids a mach header inclusion,
so just do it.
With that out of the way, and the header file inclusions
changed to global files, the driver can also be compile-tested
on other platforms.
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
There are three remaining header files that are used by omap1
specific device drivers:
- mach/soc.h provides cpu_is_omapXXX abstractions
- mach/hardware.h provides omap_read/omap_write functions
and physical addresses
- mach/mux.h provides an omap specific pinctrl abstraction
This is generally not how we do platform abstractions today,
and it would be good to completely get rid of these in favor
of passing information through platform devices and the pinctrl
subsystem.
However, given that nobody is working on that, just move it
one step forward by splitting out the header files that are
used by drivers today from the machine headers that are only
used internally.
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The register definitions in this header are used in at least four
different places, with little hope of completely cleaning that up.
Split up the file into a portion that becomes a linux-wide header
under include/linux/soc/ti/, and the parts that are actually only
needed by board files.
Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The obsolete camera support was removed, but a few lines remain in this
file and cause a warning:
arch/arm/mach-omap1/board-ams-delta.c:462:12: warning: 'ams_delta_camera_power' defined but not used [-Wunused-function]
462 | static int ams_delta_camera_power(struct device *dev, int power)
Remove this and all related lines as well.
Fixes: ce548396a433 ("media: mach-omap1: board-ams-delta.c: remove soc_camera dependencies")
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
To avoid relying on the mach/irqs.h header, stop using
OMAP_LCDC_IRQ and INT_1610_SoSSI_MATCH directly in the driver
code, but instead pass these as resources.
Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The omapfb driver is split into platform specific code for omap1, and
driver code that is also specific to omap1.
Moving both parts into the driver directory simplifies the structure
and avoids the dependency on certain omap machine header files.
As mach/lcd_dma.h can not be included from include/linux/omap-dma.h
any more now, move the omap_lcd_dma_running() declaration into the
omap-dma header, which matches where it is defined.
Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
To avoid using the mach/omap1510.h header file, pass the correct
address as platform data.
Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
After all the work that Linus Walleij did on this platform, it can be
part of a generic kernel build as well.
Note that there are known bugs in little-endian mode on ixp4xx, and
no other ARMv5 platform at this point supports big-endian mode, or is
likely to in the future, so there is limited practical value in this,
but it helps with build testing and ixp4xx little-endian support may
get fixed in the future.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Choosing big-endian vs little-endian kernels in Kconfig has not worked
correctly since the introduction of CONFIG_ARCH_MULTIPLATFORM a long
time ago.
The problems is that CONFIG_BIG_ENDIAN depends on
ARCH_SUPPORTS_BIG_ENDIAN, which can set by any one platform
in the config, but would actually have to be supported by all
of them.
This was mostly ok for ARMv6/ARMv7 builds, since these are BE8 and
tend to just work aside from problems in nonportable device drivers.
For ARMv4/v5 machines, CONFIG_BIG_ENDIAN and CONFIG_ARCH_MULTIPLATFORM
were never set together, so this was disabled on all those machines
except for IXP4xx.
As IXP4xx can now become part of ARCH_MULTIPLATFORM, it seems better to
formalize this logic: all ARMv4/v5 platforms get an explicit dependency
on being either big-endian (ixp4xx) or little-endian (the rest). We may
want to fix ixp4xx in the future to support both, but it does not work
in LE mode at the moment.
For the ARMv6/v7 platforms, there are two ways this could be handled
a) allow both modes only for platforms selecting
'ARCH_SUPPORTS_BIG_ENDIAN' today, but only LE mode for the
others, given that these were added intentionally at some
point.
b) allow both modes everwhere, given that it was already possible
to build that way by e.g. selecting ARCH_VIRT, and that the
list is not an accurate reflection of which platforms may or
may not work.
Out of these, I picked b) because it seemed slighly more logical
to me.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
After iop32x was converted to the generic multi-irq entry
code, nothing really stops us from building it into a
generic kernel.
The two last headers can simply be removed, the mach/irqs.h
gets replaced with the sparse-irq intiialization from the
board specific .nr_irqs value, and the decompressor debug
output can use the debug_ll hack that all other platforms
use.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
With the custom ISA I/O and the missing sparse-irq support
out of the way, s3c24xx can now be built into the same
kernel as all other ARM9 based platforms.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
As a final bit of preparation for converting to ARCH_MULTIPLATFORM,
change the interrupt handling for s3c24xx to use sparse IRQs.
Since the number of possible interrupts is already fixed and relatively
small per chip, just make it use all legacy interrupts preallocated
using the .nr_irqs field in the machine descriptor, rather than actually
allocating domains on the fly.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
BAST is the one machine that theoretically supports unmodified ISA
drivers for hardware on its PC/104 connector, using a custom version of
the inb()/outb() and inw()/outw() macros.
This is incompatible with the generic version used in asm/io.h, and
can't easily be used in a multiplatform kernel.
Removing the special case for 16-bit I/O port access on BAST gets us
closer to multiplatform, at the expense of any PC/104 users with 16-bit
cards having to either use an older kernel or modify their ISA drivers
to manually ioremap() the area and use readw()/write() in place of
inw()/outw(). Either way is probably ok, given that there is a
recurring discussion about dropping s3c24xx altogether, and many
traditional ISA drivers are already gone.
Machines other than BAST already have no support for ISA drivers, though a
couple of them do map one of the external chip-selects into the ISA port
range, using the same address for 8-bit and 16-bit I/O. It is unlikely
that anything actually uses this mapping, but it's also easy to keep
this working by mapping it to the normal platform-independent PCI I/O
base that is otherwise unused on s3c24xx.
The mach/map-base.h file is no longer referenced in global headers and
can be moved into the platform directory.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The dove platform is now ready to be enabled for multiplatform
support, this patch does the switch over by modifying the Kconfig file,
the defconfig and removing the last mach/*.h header that becomes obsolete
with this.
This work was originally done in 2015 as all the ARMv7 machiens
gove moved over to multiplatform builds, but at the time it conflicted
with some patches that Russell was trying to upstream, so we
left it at that.
I hope that there is no longer a need to keep dove separate from the
rest, so we can either add it to the other ARMv7 platforms, or just
replace it with the DT based platform code for the same hardware
in mach-mvebu and remove mach-dove entirely.
Acked-by: Andrew Lunn <andrew@lunn.ch>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Cc: Gregory Clement <gregory.clement@bootlin.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
With the clock support and the interrupts out of the way, ep93xx can be
compiled into the same kernel image as the other ARMv4/v5 platforms. The
last obstacle are the two workarounds for broken boot loaders that
require us to re-initialize the ethernet controller and/or the watchdog
on certain machines.
Move this code into the decompressor sources directly, checking for
each possibly affected machine individually.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Nothing relies on it outside of arch/arm/mach-ep93xx/, so just move
it there.
Cc: Hartley Sweeten <hsweeten@visionengravers.com>
Tested-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Without CONFIG_SPARSE_IRQ, we rely on mach/irqs.h to define NR_IRQS
globally. Do the minimal conversion by setting .nr_irqs in each
machine descriptor.
Only the vision_ep9307 machine has extra IRQs for GPIOs, so make
.nr_irqs the original value there, while using the plain NR_EP93XX_IRQS
everywhere else.
Cc: Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Hubert Feurstein <hubert.feurstein@contec.at>
Cc: Lukasz Majewski <lukma@denx.de>
Tested-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
With the move to irq domains, no irqchip must start at number 0,
so shift all the hardwired IRQ numbers by one.
Tested-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
These are all fairly small platforms by now, and they are
closely related. Just move them all into a single directory.
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Liviu Dudau <liviu.dudau@arm.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Tested-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Make the prctl() for enabling dynamic XSTATE components correct so it
adds the newly requested feature to the permission bitmap instead of
overwriting it. Add a selftest which validates that.
- Unroll string MMIO for encrypted SEV guests as the hypervisor cannot
emulate it.
- Handle supervisor states correctly in the FPU/XSTATE code so it takes
the feature set of the fpstate buffer into account. The feature sets
can differ between host and guest buffers. Guest buffers do not contain
supervisor states. So far this was not an issue, but with enabling
PASID it needs to be handled in the buffer offset calculation and in
the permission bitmaps.
- Avoid a gazillion of repeated CPUID invocations in by caching the values
early in the FPU/XSTATE code.
- Enable CONFIG_WERROR for X86.
- Make the X86 defconfigs more useful by adapting them to Y2022 reality.
-----BEGIN PGP SIGNATURE-----
iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAmJJWwwTHHRnbHhAbGlu
dXRyb25peC5kZQAKCRCmGPVMDXSYoT3mEACA9xkNjECn/MHN3B0X5wTPhVyw9+TJ
OdfpqL7C9pbAU1s2mwf3TyicrCOqx8nlnOYB/mXgfRGnbZqmUeGQFpZFM587dm/I
r/BtouAzSASjnaW7SijT3gnRTqMPVNTcLOTUEVjnTa7zatw+t4rH1uxE9dLqEq9B
cKMtsBOJyTTbj4ie3ngkUS2PQngNNHLJ4oQGZW4wCA5snLuwF1LlgcZJy8Zkrlpo
D58h/ZV6K2/tI7INWLINlqGnxaL2B/Ld4zXsFH+t05XGh+JOiq8ueLi5tdfEPG9f
/pzuGia0Cv6WBv+jOHLCBe2kfgvBx+Y8Goi0tqL0hwKCGjpZlQkhRccrjbVSAPhW
2SfxOD1pulTwI1J75csYXjTc/heJvAv/ZpZSz3wldM3fyiwnmgfWKlMYqG6Xb9+T
2OHwEUJHJQnon/f25+yb9dWI7HYMw2fEIqu3CgbRyOviObcB9MM1uKVErkCYAUWY
W7Q8ShjNPrUguCPbw4YFPIwaazuhRbR8t2kRvfBOyTYwh3jo6U3eRL72Cov84uik
hnFtUdiusWtvV59ngZelREmd3iVKif2hxx7EoGDY/VV2Ru4C2X/xgJemKJeKSR/f
gm6pp8wbPSC4TBJOfP6IwYtoZKyu03miIeupPPUDxx0hLbx5j2e6EgVM5NVAeJFF
fu4MEkGvStZc+w==
=GK27
-----END PGP SIGNATURE-----
Merge tag 'x86-urgent-2022-04-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Thomas Gleixner:
"A set of x86 fixes and updates:
- Make the prctl() for enabling dynamic XSTATE components correct so
it adds the newly requested feature to the permission bitmap
instead of overwriting it. Add a selftest which validates that.
- Unroll string MMIO for encrypted SEV guests as the hypervisor
cannot emulate it.
- Handle supervisor states correctly in the FPU/XSTATE code so it
takes the feature set of the fpstate buffer into account. The
feature sets can differ between host and guest buffers. Guest
buffers do not contain supervisor states. So far this was not an
issue, but with enabling PASID it needs to be handled in the buffer
offset calculation and in the permission bitmaps.
- Avoid a gazillion of repeated CPUID invocations in by caching the
values early in the FPU/XSTATE code.
- Enable CONFIG_WERROR in x86 defconfig.
- Make the X86 defconfigs more useful by adapting them to Y2022
reality"
* tag 'x86-urgent-2022-04-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/fpu/xstate: Consolidate size calculations
x86/fpu/xstate: Handle supervisor states in XSTATE permissions
x86/fpu/xsave: Handle compacted offsets correctly with supervisor states
x86/fpu: Cache xfeature flags from CPUID
x86/fpu/xsave: Initialize offset/size cache early
x86/fpu: Remove unused supervisor only offsets
x86/fpu: Remove redundant XCOMP_BV initialization
x86/sev: Unroll string mmio with CC_ATTR_GUEST_UNROLL_STRING_IO
x86/config: Make the x86 defconfigs a bit more usable
x86/defconfig: Enable WERROR
selftests/x86/amx: Update the ARCH_REQ_XCOMP_PERM test
x86/fpu/xstate: Fix the ARCH_REQ_XCOMP_PERM implementation
generalized.
-----BEGIN PGP SIGNATURE-----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=mJKF
-----END PGP SIGNATURE-----
Merge tag 'core-urgent-2022-04-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull RT signal fix from Thomas Gleixner:
"Revert the RT related signal changes. They need to be reworked and
generalized"
* tag 'core-urgent-2022-04-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
Revert "signal, x86: Delay calling signals in atomic on RT enabled kernels"
