This driver implements a GPIO enable/disable delay. It supports a list
of GPIO outputs, which ramp-up/ramp-down delay can be specified at
consumer location.
The main purpose is to address external, passive delays upon line
voltage changes.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
In fact the device with chip id 0xD283 is called NCT6126D, and that is
the chip id the Nuvoton code was written for. Correct that name to avoid
confusion, because a NCT6116D in fact exists as well but has another
chip id, and is currently not supported.
The look at the spec also revealed that GPIO group7 in fact has 8 pins,
so correct the pin count in that group as well.
Fixes: d0918a84af ("gpio-f7188x: Add GPIO support for Nuvoton NCT6116")
Reported-by: Xing Tong Wu <xingtong.wu@siemens.com>
Signed-off-by: Henning Schild <henning.schild@siemens.com>
Acked-by: Simon Guinot <simon.guinot@sequanux.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
In a future patch HAS_IOPORT=n will result in inb()/outb() and friends
not being declared. We thus need to add HAS_IOPORT as dependency for
those drivers using them.
Co-developed-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
- Add support for Renesas RZ/G2L MTU3
- New Device Support
- Add support for Lenovo Yoga Book X90F to Intel CHT WC
- Add support for MAX5970 and MAX5978 to Simple MFD (I2C)
- Add support for Meteor Lake PCH-S LPSS PCI to Intel LPSS PCI
- Add support for AXP15060 PMIC to X-Powers PMIC collection
- Remove Device Support
- Remove support for Samsung 5M8751 and S5M8763 PMIC devices
- New Functionality
- Convert deprecated QCOM IRQ Chip to config registers
- Add support for 32-bit address spaces to Renesas SMUs
- Fix-ups
- Make use of APIs / MACROs designed to simplify and demystify
- Add / improve Device Tree bindings
- Memory saving struct layout optimisations
- Remove old / deprecated functionality
- Factor out unassigned register addresses from ranges
- Trivial: Spelling fixes, renames and coding style fixes
- Rid 'defined but not used' warnings
- Remove ineffective casts and pointer stubs
- Bug Fixes
- Fix incorrectly non-inverted mask/unmask IRQs on QCOM platforms
- Remove MODULE_*() helpers from non-tristate drivers
- Do not attempt to use out-of-range memory addresses associated with io_base
- Provide missing export helpers
- Fix remap bulk read optimisation fallout
- Fix memory leak issues in error paths
-----BEGIN PGP SIGNATURE-----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=EBtX
-----END PGP SIGNATURE-----
Merge tag 'mfd-next-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
"New Drivers:
- Add support for Renesas RZ/G2L MTU3
New Device Support:
- Add support for Lenovo Yoga Book X90F to Intel CHT WC
- Add support for MAX5970 and MAX5978 to Simple MFD (I2C)
- Add support for Meteor Lake PCH-S LPSS PCI to Intel LPSS PCI
- Add support for AXP15060 PMIC to X-Powers PMIC collection
Remove Device Support:
- Remove support for Samsung 5M8751 and S5M8763 PMIC devices
New Functionality:
- Convert deprecated QCOM IRQ Chip to config registers
- Add support for 32-bit address spaces to Renesas SMUs
Fix-ups:
- Make use of APIs / MACROs designed to simplify and demystify
- Add / improve Device Tree bindings
- Memory saving struct layout optimisations
- Remove old / deprecated functionality
- Factor out unassigned register addresses from ranges
- Trivial: Spelling fixes, renames and coding style fixes
- Rid 'defined but not used' warnings
- Remove ineffective casts and pointer stubs
Bug Fixes:
- Fix incorrectly non-inverted mask/unmask IRQs on QCOM platforms
- Remove MODULE_*() helpers from non-tristate drivers
- Do not attempt to use out-of-range memory addresses associated with io_base
- Provide missing export helpers
- Fix remap bulk read optimisation fallout
- Fix memory leak issues in error paths"
* tag 'mfd-next-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (88 commits)
dt-bindings: mfd: ti,j721e-system-controller: Add SoC chip ID
leds: bd2606mvv: Driver for the Rohm 6 Channel i2c LED driver
dt-bindings: mfd: qcom,spmi-pmic: Document flash LED controller
dt-bindings: mfd: x-powers,axp152: Document the AXP15060 variant
mfd: axp20x: Add support for AXP15060 PMIC
dt-bindings: mfd: x-powers,axp152: Document the AXP313a variant
counter: rz-mtu3-cnt: Unlock on error in rz_mtu3_count_ceiling_write()
dt-bindings: mfd: dlg,da9063: Document voltage monitoring
dt-bindings: mfd: stm32: Remove unnecessary blank lines
dt-bindings: mfd: qcom,spmi-pmic: Use generic ADC node name in examples
dt-bindings: mfd: syscon: Add nuvoton,ma35d1-sys compatible
MAINTAINERS: Add entries for Renesas RZ/G2L MTU3a counter driver
counter: Add Renesas RZ/G2L MTU3a counter driver
Documentation: ABI: sysfs-bus-counter: add cascade_counts_enable and external_input_phase_clock_select
mfd: Add Renesas RZ/G2L MTU3a core driver
dt-bindings: timer: Document RZ/G2L MTU3a bindings
mfd: rsmu_i2c: Convert to i2c's .probe_new() again
mfd: intel-lpss: Add Intel Meteor Lake PCH-S LPSS PCI IDs
mfd: dln2: Fix memory leak in dln2_probe()
mfd: axp20x: Fix axp288 writable-ranges
...
This patch implements the GPIO function of Intel USB-I2C/GPIO/SPI adapter
device named "La Jolla Cove Adapter" (LJCA). It communicate with LJCA
GPIO module with specific protocol through interfaces exported by LJCA USB
driver.
Signed-off-by: Ye Xiang <xiang.ye@intel.com>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230225140118.2037220-3-xiang.ye@intel.com
New drivers:
- add a driver for the Loongson GPIO controller
- add a driver for the fxl6408 I2C GPIO expander
- add a GPIO module containing code common for Intel Elkhart Lake and
Merrifield platforms
- add a driver for the Intel Elkhart Lake platform reusing the code from
the intel tangier library
GPIOLIB core:
- GPIO ACPI improvements
- simplify gpiochip_add_data_with_keys() fwnode handling
- cleanup header inclusions (remove unneeded ones, order the rest
alphabetically)
- remove duplicate code (reuse krealloc() instead of open-coding it, drop
a duplicated check in gpiod_find_and_request())
- reshuffle the code to remove unnecessary forward declarations
- coding style cleanups and improvements
- add a helper for accessing device fwnodes
- small updates in docs
Driver improvements:
- convert all remaining GPIO irqchip drivers to using immutable irqchips
- drop unnecessary of_match_ptr() macro expansions
- shrink the code in gpio-merrifield significantly by reusing the code from
gpio-tangier + minor tweaks to the driver code
- remove MODULE_LICENSE() from drivers that can only be built-in
- add device-tree support to gpio-loongson1
- use new regmap features in gpio-104-dio-48e and gpio-pcie-idio-24
- minor tweaks and fixes to gpio-xra1403, gpio-sim, gpio-tegra194, gpio-omap,
gpio-aspeed, gpio-raspberrypi-exp
- shrink code in gpio-ich and gpio-pxa
- Kconfig tweak for gpio-pmic-eic-sprd
-----BEGIN PGP SIGNATURE-----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=X+sP
-----END PGP SIGNATURE-----
Merge tag 'gpio-updates-for-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski:
"We have some new drivers, significant refactoring of existing intel
platforms, lots of improvements all around, mass conversion to using
immutable irqchips by drivers that had not been converted individually
yet and some changes in the core library code.
Summary:
New drivers:
- add a driver for the Loongson GPIO controller
- add a driver for the fxl6408 I2C GPIO expander
- add a GPIO module containing code common for Intel Elkhart Lake and
Merrifield platforms
- add a driver for the Intel Elkhart Lake platform reusing the code
from the intel tangier library
GPIOLIB core:
- GPIO ACPI improvements
- simplify gpiochip_add_data_with_keys() fwnode handling
- cleanup header inclusions (remove unneeded ones, order the rest
alphabetically)
- remove duplicate code (reuse krealloc() instead of open-coding it,
drop a duplicated check in gpiod_find_and_request())
- reshuffle the code to remove unnecessary forward declarations
- coding style cleanups and improvements
- add a helper for accessing device fwnodes
- small updates in docs
Driver improvements:
- convert all remaining GPIO irqchip drivers to using immutable
irqchips
- drop unnecessary of_match_ptr() macro expansions
- shrink the code in gpio-merrifield significantly by reusing the
code from gpio-tangier + minor tweaks to the driver code
- remove MODULE_LICENSE() from drivers that can only be built-in
- add device-tree support to gpio-loongson1
- use new regmap features in gpio-104-dio-48e and gpio-pcie-idio-24
- minor tweaks and fixes to gpio-xra1403, gpio-sim, gpio-tegra194,
gpio-omap, gpio-aspeed, gpio-raspberrypi-exp
- shrink code in gpio-ich and gpio-pxa
- Kconfig tweak for gpio-pmic-eic-sprd"
* tag 'gpio-updates-for-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (99 commits)
gpio: gpiolib: Simplify gpiochip_add_data_with_key() fwnode
gpiolib: Add gpiochip_set_data() helper
gpiolib: Move gpiochip_get_data() higher in the code
gpiolib: Check array_info for NULL only once in gpiod_get_array()
gpiolib: Replace open coded krealloc()
gpiolib: acpi: Add a ignore wakeup quirk for Clevo NL5xNU
gpiolib: acpi: Move ACPI device NULL check to acpi_get_driver_gpio_data()
gpiolib: acpi: use the fwnode in acpi_gpiochip_find()
gpio: mm-lantiq: Fix typo in the newly added header filename
sh: mach-x3proto: Add missing #include <linux/gpio/driver.h>
powerpc/40x: Add missing select OF_GPIO_MM_GPIOCHIP
gpio: xlp: Convert to immutable irq_chip
gpio: xilinx: Convert to immutable irq_chip
gpio: xgs-iproc: Convert to immutable irq_chip
gpio: visconti: Convert to immutable irq_chip
gpio: tqmx86: Convert to immutable irq_chip
gpio: thunderx: Convert to immutable irq_chip
gpio: stmpe: Convert to immutable irq_chip
gpio: siox: Convert to immutable irq_chip
gpio: rda: Convert to immutable irq_chip
...
* Fixed suspend issue on Clevo NL5xNU
* Split a new Intel Tangier (library) driver for current and new platforms
* Introduced a new driver for Intel Elkhart Lake PSE GPIO (see also above)
* Contained a few fixes for the previous of_gpio.h cleanup
* Miscellaneous cleanups here and there
The following is an automated git shortlog grouped by driver:
elkhartlake:
- Introduce Intel Elkhart Lake PSE GPIO
gpiolib:
- acpi: Add a ignore wakeup quirk for Clevo NL5xNU
- acpi: Move ACPI device NULL check to acpi_get_driver_gpio_data()
- acpi: use the fwnode in acpi_gpiochip_find()
ich:
- Use devm_gpiochip_add_data() to simplify remove path
merrifield:
- Utilise temporary variable for struct device
- Use dev_err_probe()
- Adapt to Intel Tangier GPIO driver
mips:
- ar7: include linux/gpio/driver.h
mm-lantiq:
- Fix typo in the newly added header filename
powerpc/40x:
- Add missing select OF_GPIO_MM_GPIOCHIP
sh:
- mach-x3proto: Add missing #include <linux/gpio/driver.h>
tangier:
- Introduce Intel Tangier GPIO driver
-----BEGIN PGP SIGNATURE-----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=yI78
-----END PGP SIGNATURE-----
Merge tag 'intel-gpio-v6.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/andy/linux-gpio-intel into gpio/for-next
intel-gpio for v6.4-2
* Fixed suspend issue on Clevo NL5xNU
* Split a new Intel Tangier (library) driver for current and new platforms
* Introduced a new driver for Intel Elkhart Lake PSE GPIO (see also above)
* Contained a few fixes for the previous of_gpio.h cleanup
* Miscellaneous cleanups here and there
The following is an automated git shortlog grouped by driver:
elkhartlake:
- Introduce Intel Elkhart Lake PSE GPIO
gpiolib:
- acpi: Add a ignore wakeup quirk for Clevo NL5xNU
- acpi: Move ACPI device NULL check to acpi_get_driver_gpio_data()
- acpi: use the fwnode in acpi_gpiochip_find()
ich:
- Use devm_gpiochip_add_data() to simplify remove path
merrifield:
- Utilise temporary variable for struct device
- Use dev_err_probe()
- Adapt to Intel Tangier GPIO driver
mips:
- ar7: include linux/gpio/driver.h
mm-lantiq:
- Fix typo in the newly added header filename
powerpc/40x:
- Add missing select OF_GPIO_MM_GPIOCHIP
sh:
- mach-x3proto: Add missing #include <linux/gpio/driver.h>
tangier:
- Introduce Intel Tangier GPIO driver
Add minimal driver for Fairchild FXL6408 8-bit I2C-controlled GPIO expander
using the generic regmap based GPIO driver (GPIO_REGMAP).
The driver implements setting the GPIO direction, reading inputs
and writing outputs.
In addition to that the FXL6408 has the following functionalities:
- allows to monitor input ports for data transitions with an interrupt pin
- all inputs can be configured with pull-up or pull-down resistors
Datasheet: https://www.onsemi.com/download/data-sheet/pdf/fxl6408-d.pdf
Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com>
Co-developed-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
[Bartosz: order includes alphabetically]
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
* Remove some of the legacy APIs that are not used anymore
* Clean up headers in the GPIO library and drivers
The following is an automated git shortlog grouped by driver:
aggregator:
- Add missing header(s)
ARM:
- s3c64xx: Use the right include
- orion/gpio: Use the right include
gpiolib:
- Clean up headers
- Group forward declarations in consumer.h
- Deduplicate forward declarations in consumer.h
- Drop unused forward declaration from driver.h
- split of_mm_gpio_chip out of linux/of_gpio.h
- split linux/gpio/driver.h out of linux/gpio.h
- remove legacy gpio_export()
- remove gpio_set_debounce()
- remove asm-generic/gpio.h
- coldfire: remove custom asm/gpio.h
- remove empty asm/gpio.h files
- Make the legacy <linux/gpio.h> consumer-only
hte:
- tegra-194: Use proper includes
reg:
- Add missing header(s)
regmap:
- Add missing header(s)
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEqaflIX74DDDzMJJtb7wzTHR8rCgFAmQHHfQACgkQb7wzTHR8
rCim7A//Rar7oFB82nHriufTxWV0CjQzu2xJw3p0liIyA7iWydEVpparfM7Mqv0z
3Z/03vG1H12M8wQ4jFyPfxcT1UPLaQSRCBl7omEWupFHvyUEIz+/Xxt9BY9RAKno
ZK2Ty0YR00MlXZOPosd+Hv9jwWJMw2mrwQy4mStn8jCCeblF675ad6dfzVuPlsaY
kKdZslUT48NcCQZolQaz6V0ygy6O2JUabkuh9uJSYG0/ZN4UZzCYtvhfcvXgVTNJ
IQz2Fl4g1mR/r1JU8upVW0WR78LEKIcyUHD+ARD4oCXPdjSTp8k25UExyn121k7L
qxSAIlJKEg0s0/0hwVOsuyhnYrJXXgivkOGXbnDp27Su8pGejHS0WGn4LMxTa2SV
A1OaxrfxAy57lBv3j4bfEWTxQB1Nxo22EA2ejm5Jd0JxB6cQ2NlJqlwE+StYYSkg
8sFp/rim/mcNO3r3BLa/WliOp+TWtVFAsVCSf9uxVQmtUBnoHte+GGiyVZZuSNyS
fS8F5xURJQwempT1T0LUr6Ex5s4okJc9D+wEpatK9IpSszBgFOdb/U335+noRChF
pLkQsAOZa5GTGQbHYkAUBJY90gd8KN+63sJNBgcpo1HxifCrSfjrSw8T3tJhUAH/
ppI1R3KLhFQzl8jB/3EDN+eNWvtMPqAc19JEsfOuG9ytGBj/wX0=
=DBx5
-----END PGP SIGNATURE-----
Merge tag 'intel-gpio-v6.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/andy/linux-gpio-intel into gpio/for-next
intel-gpio for v6.4-1
* Remove some of the legacy APIs that are not used anymore
* Clean up headers in the GPIO library and drivers
The following is an automated git shortlog grouped by driver:
aggregator:
- Add missing header(s)
ARM:
- s3c64xx: Use the right include
- orion/gpio: Use the right include
gpiolib:
- Clean up headers
- Group forward declarations in consumer.h
- Deduplicate forward declarations in consumer.h
- Drop unused forward declaration from driver.h
- split of_mm_gpio_chip out of linux/of_gpio.h
- split linux/gpio/driver.h out of linux/gpio.h
- remove legacy gpio_export()
- remove gpio_set_debounce()
- remove asm-generic/gpio.h
- coldfire: remove custom asm/gpio.h
- remove empty asm/gpio.h files
- Make the legacy <linux/gpio.h> consumer-only
hte:
- tegra-194: Use proper includes
reg:
- Add missing header(s)
regmap:
- Add missing header(s)
This driver adds support for Intel Elkhart Lake PSE GPIO controller,
using Intel Tangier as a library driver.
Signed-off-by: Pandith N <pandith.n@intel.com>
Co-developed-by: Raag Jadav <raag.jadav@intel.com>
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Co-developed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Make use of Intel Tangier GPIO as a library driver for Merrifield.
Signed-off-by: Pandith N <pandith.n@intel.com>
Co-developed-by: Raag Jadav <raag.jadav@intel.com>
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Co-developed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Intel Elkhart Lake and Merrifield platforms have same GPIO IP.
Intel Tangier implements the common GPIO functionalities for both
Elkhart Lake and Merrifield platforms.
Signed-off-by: Pandith N <pandith.n@intel.com>
Co-developed-by: Raag Jadav <raag.jadav@intel.com>
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Co-developed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
This is a rarely used feature that has nothing to do with the
client-side of_gpio.h.
Split it out with a separate header file and Kconfig option
so it can be removed on its own timeline aside from removing
the of_gpio consumer interfaces.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Now that coldfire is the only user of a custom asm/gpio.h, it seems
better to remove this as well, and have the same interface everywhere.
For the gpio_get_value()/gpio_set_value()/gpio_to_irq(), gpio_cansleep()
functions, the custom version is only a micro-optimization to inline the
function for constant GPIO numbers. However, in the coldfire defconfigs,
I was unable to find a single instance where this micro-optimization
was even used, and according to Geert the only user appears to be the
QSPI chip that is disabled everywhere.
The custom gpio_request_one() function is even less useful, as it is
guarded by an #ifdef that is never true.
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
REGMAP is a hidden (not user visible) symbol. Users cannot set it
directly thru "make *config", so drivers should select it instead of
depending on it if they need it.
Consistently using "select" or "depends on" can also help reduce
Kconfig circular dependency issues.
Therefore, change the use of "depends on REGMAP" to "select REGMAP".
Fixes: ebe363197e ("gpio: add a reusable generic gpio_chip using regmap")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Michael Walle <michael@walle.cc>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Bartosz Golaszewski <brgl@bgdev.pl>
Cc: linux-gpio@vger.kernel.org
Acked-by: Michael Walle <michael@walle.cc>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The Spreadtrum PMIC EIC interrupt controller is part of an
MFD expander and should thus be in the MFD GPIO expander
menu section with the rest. Move it.
Cc: Cixi Geng <cixi.geng1@unisoc.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The Loongson platforms GPIO controller contains 60 GPIO pins in total,
4 of which are dedicated GPIO pins, and the remaining 56 are reused
with other functions. Each GPIO can set input/output and has the
interrupt capability.
This driver added support for Loongson GPIO controller and support to
use DTS or ACPI to descibe GPIO device resources.
Signed-off-by: Jianmin Lv <lvjianmin@loongson.cn>
Signed-off-by: Hongchen Zhang <zhanghongchen@loongson.cn>
Signed-off-by: Liu Peibao <liupeibao@loongson.cn>
Signed-off-by: Juxin Gao <gaojuxin@loongson.cn>
Signed-off-by: Yinbo Zhu <zhuyinbo@loongson.cn>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Core GPIOLIB:
- drop several OF interfaces after moving a significant part of the code to
using software nodes
- remove more interfaces referring to the global GPIO numberspace that we're
getting rid of
- improvements in the gpio-regmap library
- add helper for GPIO device reference counting
- remove unused APIs
- minor tweaks like sorting headers alphabetically
Extended support in existing drivers:
- add support for Tegra 234 PMC to gpio-tegra186
Driver improvements:
- migrate the 104-dio/idi family of drivers to using the regmap-irq API
- migrate gpio-i8255 and gpio-mm to the GPIO regmap API
- clean-ups in gpio-pca953x
- remove duplicate assignments of of_gpio_n_cells in gpio-davinci, gpio-ge,
gpio-xilinx, gpio-zevio and gpio-wcd934x
- improvements to gpio-pcf857x: implement get/set_multiple callbacks, use
generic device properties instead of OF + minor tweaks
- fix OF-related header includes and Kconfig dependencies in gpio-zevio
- dynamically allocate the GPIO base in gpio-omap
- use a dedicated printf specifier for printing fwnode info in gpio-sim
- use dev_name() for the GPIO chip label in gpio-vf610
- other minor tweaks and fixes
Documentation:
- remove mentions of legacy API from comments in various places
- convert the DT binding documents to YAML schema for Fujitsu MB86S7x, Unisoc
GPIO and Unisoc EIC
- document the Unisoc UMS512 controller in DT bindings
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEFp3rbAvDxGAT0sefEacuoBRx13IFAmP13YgACgkQEacuoBRx
13L7Ng/+P1e/j+Z32kPrpiKTChHnQ5ty9VFGwQQX2Gva32bRh/WuzhI2leHUIzOb
a6qnwxoVUPml6IEoh8jctENM4/J/BBtEkmXAl3f4sd3j7yz7G85y3XiV5qyRV4lH
dNWjvwtfATI0nxp58NiqRiZVx2W62AJtNgHOaG+OMe+KL6GZf6F/nEqtRGFHA3yi
pxmajxIRADCgEH9lQ61B6MSd8tM2EEEe2G36mHQRni85L2XSXl6r7zbWFLtdLTf3
KkSM4f8gjIMud6tZr7TsS7l3afZXCrtxrF74/WCYLInRNWuMkC9sHU/EkyfnqoVS
MYMfaprhXP6gyVxJJrqPwJOo1mSMAijIga6HzmcMF6MmozwmbpYeUiTEVW48fxLg
tHZV2CzxOJqXC36RDIUGDYalHmyknVsK8CeGtHuJNg87TAczRX/tAJtyji3Y1yQd
YRAKVp2akkc8uzPKf8UU0Vnp+vgej84RbKsjHs+7NoPepQW6lG8iYDMNMMiokYAH
EvXlakqSbQiIdipF7vsk6NuWMlXn1LusL9SdxC7332l88Ix7wFlhtNr1Ggf8kdmB
nPrmG3EqG/zXm+3AYvFY6xbAVXOsNwU1K+/4et5sRTG8lWNrB73qMAi0UYOm25J5
A4VTaGQyP4Coqa+1yoVsaequOrkq7WsZVakLMMUGGrWva11Ajl0=
=wWXb
-----END PGP SIGNATURE-----
Merge tag 'gpio-updates-for-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski:
"A rather small update, there are no new drivers, just improvements and
refactoring in existing ones.
Thanks to migrating of several drivers to using generalized APIs and
dropping of OF interfaces in favor of using software nodes we're
actually removing more code than we're adding.
Core GPIOLIB:
- drop several OF interfaces after moving a significant part of the
code to using software nodes
- remove more interfaces referring to the global GPIO numberspace
that we're getting rid of
- improvements in the gpio-regmap library
- add helper for GPIO device reference counting
- remove unused APIs
- minor tweaks like sorting headers alphabetically
Extended support in existing drivers:
- add support for Tegra 234 PMC to gpio-tegra186
Driver improvements:
- migrate the 104-dio/idi family of drivers to using the regmap-irq
API
- migrate gpio-i8255 and gpio-mm to the GPIO regmap API
- clean-ups in gpio-pca953x
- remove duplicate assignments of of_gpio_n_cells in gpio-davinci,
gpio-ge, gpio-xilinx, gpio-zevio and gpio-wcd934x
- improvements to gpio-pcf857x: implement get/set_multiple callbacks,
use generic device properties instead of OF + minor tweaks
- fix OF-related header includes and Kconfig dependencies in
gpio-zevio
- dynamically allocate the GPIO base in gpio-omap
- use a dedicated printf specifier for printing fwnode info in
gpio-sim
- use dev_name() for the GPIO chip label in gpio-vf610
- other minor tweaks and fixes
Documentation:
- remove mentions of legacy API from comments in various places
- convert the DT binding documents to YAML schema for Fujitsu
MB86S7x, Unisoc GPIO and Unisoc EIC
- document the Unisoc UMS512 controller in DT bindings"
* tag 'gpio-updates-for-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (54 commits)
gpio: sim: Use %pfwP specifier instead of calling fwnode API directly
gpio: tegra186: remove unneeded loop in tegra186_gpio_init_route_mapping()
gpiolib: of: Move enum of_gpio_flags to its only user
gpio: mvebu: Use IS_REACHABLE instead of IS_ENABLED for CONFIG_PWM
gpio: zevio: Add missing header
gpio: Get rid of gpio_to_chip()
gpio: pcf857x: Drop unneeded explicit casting
gpio: pcf857x: Make use of device properties
gpio: pcf857x: Get rid of legacy platform data
gpio: rockchip: Do not mention legacy API in the code
gpio: wcd934x: Remove duplicate assignment of of_gpio_n_cells
gpio: zevio: Use proper headers and drop OF_GPIO dependency
gpio: zevio: Remove duplicate assignment of of_gpio_n_cells
gpio: xilinx: Remove duplicate assignment of of_gpio_n_cells
dt-bindings: gpio: Add compatible string for Unisoc UMS512
dt-bindings: gpio: Convert Unisoc EIC controller binding to yaml
dt-bindings: gpio: Convert Unisoc GPIO controller binding to yaml
gpio: ge: Remove duplicate assignment of of_gpio_n_cells
gpio: davinci: Remove duplicate assignment of of_gpio_n_cells
gpio: omap: use dynamic allocation of base
...
This is a follow-up to the deprecation of most of the old-style board
files that was merged in linux-6.0, removing them for good.
This branch is almost exclusively dead code removal based on those
annotations. Some device driver removals went through separate subsystem
trees, but the majority is in the same branch, in order to better handle
dependencies between the patches and avoid breaking bisection.
Unfortunately that leads to merge conflicts against other changes in the
subsystem trees, but they should all be trivial to resolve by removing
the files.
See commit 7d0d3fa733 ("Merge tag 'arm-boardfiles-6.0' of
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc") for the
description of which machines were marked unused and are now removed. The
only removals that got postponed are Terastation WXL (mv78xx0) and
Jornada720 (StrongARM1100), which turned out to still have potential
users.
-----BEGIN PGP SIGNATURE-----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=WejQ
-----END PGP SIGNATURE-----
Merge tag 'arm-boardfile-remove-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC boardfile updates from Arnd Bergmann
"Unused boardfile removal for 6.3
This is a follow-up to the deprecation of most of the old-style board
files that was merged in linux-6.0, removing them for good.
This branch is almost exclusively dead code removal based on those
annotations. Some device driver removals went through separate
subsystem trees, but the majority is in the same branch, in order to
better handle dependencies between the patches and avoid breaking
bisection.
Unfortunately that leads to merge conflicts against other changes in
the subsystem trees, but they should all be trivial to resolve by
removing the files.
See commit 7d0d3fa733 ("Merge tag 'arm-boardfiles-6.0' of
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc") for the
description of which machines were marked unused and are now removed.
The only removals that got postponed are Terastation WXL (mv78xx0) and
Jornada720 (StrongARM1100), which turned out to still have potential
users"
* tag 'arm-boardfile-remove-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (91 commits)
mmc: omap: drop TPS65010 dependency
ARM: pxa: restore mfp-pxa320.h
usb: ohci-omap: avoid unused-variable warning
ARM: debug: remove references in DEBUG_UART_8250_SHIFT to removed configs
ARM: s3c: remove obsolete s3c-cpu-freq header
MAINTAINERS: adjust SAMSUNG SOC CLOCK DRIVERS after s3c24xx support removal
MAINTAINERS: update file entries after arm multi-platform rework and mach-pxa removal
ARM: remove CONFIG_UNUSED_BOARD_FILES
mfd: remove htc-pasic3 driver
w1: remove ds1wm driver
usb: remove ohci-tmio driver
fbdev: remove w100fb driver
fbdev: remove tmiofb driver
mmc: remove tmio_mmc driver
mfd: remove ucb1400 support
mfd: remove toshiba tmio drivers
rtc: remove v3020 driver
power: remove pda_power supply driver
ASoC: pxa: remove unused board support
pcmcia: remove unused pxa/sa1100 drivers
...
This driver uncondictionally uses the GPIOLIB_IRQCHIP so
select it.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The ucb1400 MFD driver and its gpio and touchscreen child
drivers were only used on a few PXA machines that were unused
for a while and are now removed.
Removing these leaves the AC97 support as ALSA specific,
no other drivers are now connected through this interface.
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Bartosz Golaszewski <brgl@bgdev.pl>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Lee Jones <lee@kernel.org>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: Marek Vasut <marex@denx.de>
Cc: linux-kernel@vger.kernel.org
Cc: linux-gpio@vger.kernel.org
Cc: linux-input@vger.kernel.org
Cc: alsa-devel@alsa-project.org
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The driver doesn't depend on the OF_GPIO to be compiled. Hence
the proper header to use is mod_devicetable.h. Replace of*.h with
the above mentioned and drop redundant dependency.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The regmap API supports IO port accessors so we can take advantage of
regmap abstractions rather than handling access to the device registers
directly in the driver. The gpio-mm module is migrated to the new i8255
library interface leveraging the gpio-regmap API.
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The regmap API supports IO port accessors so we can take advantage of
regmap abstractions rather than handling access to the device registers
directly in the driver.
By leveraging the gpio-regmap API, the i8255 library is reduced to
simply a devm_i8255_regmap_register() function, a configuration
structure struct i8255_regmap_config, and a helper macro
i8255_volatile_regmap_range() provided to simplify volatile PPI register
hinting for the regmap.
Legacy functions and code will be removed once all consumers have
migrated to the new i8255 library interface.
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The regmap API supports IO port accessors so we can take advantage of
regmap abstractions rather than handling access to the device registers
directly in the driver. Despite the underlying interface being based on
i8255, it is simpler to use the gpio-regmap API directly because the
104-IDI-48 device features only input signals. Therefore, the dependence
on the i8255 GPIO library is removed in this patch.
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The regmap API supports IO port accessors so we can take advantage of
regmap abstractions rather than handling access to the device registers
directly in the driver.
For the 104-idi-48, we get an IRQ register with some status information
and basic masking, but it's broken down by banks rather than individual
GPIO. There are six banks (8 GPIO lines each) that correspond to the
lower six bits of the IRQ register (bits 0-5):
Base Address + 7 (Read): IRQ Status Register/IRQ Clear
Bit 0-5: Respective Bank IRQ Statuses
Bit 6: IRQ Status (Active Low)
Bit 7: IRQ Enable Status
Base Address + 7 (Write): IRQ Enable/Disable
Bit 0-5: Respective Bank IRQ Enable/Disable
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The regmap API supports IO port accessors so we can take advantage of
regmap abstractions rather than handling access to the device registers
directly in the driver.
For the 104-dio-48e we have the following IRQ registers (0xB and 0xF):
Base Address +B (Write): Enable Interrupt
Base Address +B (Read): Disable Interrupt
Base Address +F (Read/Write): Clear Interrupt
Any write to 0xB will enable interrupts, while any read will disable
interrupts. Interrupts are cleared by a write to 0xF. There's no IRQ
status register, so software has to assume that if an interrupt is
raised then it was for the 104-DIO-48E device.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The iop32x platform was removed, and its gpio driver is now
orphaned.
Cc: Lennert Buytenhek <buytenh@wantstofly.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Added module build support for the davinci gpio driver
Signed-off-by: Guillaume La Roque <glaroque@baylibre.com>
Signed-off-by: Nicolas Frayer <nfrayer@baylibre.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Add support for HiSilicon GPIO controller in embedded platform, which
boot from devicetree.
Signed-off-by: Weilong Chen <chenweilong@huawei.com>
Acked-by: Jay Fang <f.fangjian@huawei.com>
Reviewed-by: Yicong Yang <yangyicong@hisilicon.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
This driver implements a GPIO multiplexer based on latches connected to
other GPIOs. A set of data GPIOs is connected to the data input of
multiple latches. The clock input of each latch is driven by another
set of GPIOs. With two 8-bit latches 10 GPIOs can be multiplexed into
16 GPIOs. GPOs might be a better term as in fact the multiplexed pins
are output only.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
[Bartosz: fixed the strange of_device_id formatting]
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The ACCES PCI-IDIO-16 device is part of the ACCES IDIO-16 family, so the
idio-16 GPIO library module is selected and utilized to consolidate
code.
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The ACCES 104-IDIO-16 device is part of the ACCES IDIO-16 family, so the
idio-16 GPIO library module is selected and utilized to consolidate
code.
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Exposes consumer library functions to facilitate communication with
devices within the ACCES IDIO-16 family such as the 104-IDIO-16 and
the PCI-IDIO-16.
A CONFIG_GPIO_IDIO_16 Kconfig option is introduced by this patch.
Modules wanting access to these idio-16 library functions should select
this Kconfig option and import the GPIO_IDIO_16 symbol namespace.
Cc: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The Connext chip has 4 gpio cells looking very similar to those of the
Nomadik, whose gpio/pinctrl driver (already featuring devicetree support)
will be used instead of the sta2x11 specific one.
Signed-off-by: Davide Ciminaghi <ciminaghi@gnudd.com>
Acked-by: Giancarlo Asnaghi <giancarlo.asnaghi@st.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
- a new driver for IBM Operational Panel
- a new driver for PinePhone keyboards
- RT5120 PMIC power key support
- various enhancements and support for new models in xpad (Xbox) driver
- a new compatible ID for Elan touchscreen driver
- rework of adp5588-keys driver to support configuring via device
properties (OF, ACPI, etc) instead of platform data, and proper support
of optional gpiochip functionality (and removal of gpio-adp5588 driver)
- improvements to firmware update handling in Synaptics RMI4 driver
- support for double key matrix in mt6779-keypad
- support for polled mode in adc-joystick driver
- other assorted driver fixes, cleanups and improvements.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQST2eWILY88ieB2DOtAj56VGEWXnAUCY0O9YwAKCRBAj56VGEWX
nICKAQD6/pS5tIWFCyYrM/A0xbkYuPWtmXqJTSGANlevU7nypwEAqaH2tYSDAdxM
NylDCPvvduHVmA2ewXgvIlUzjCLr6As=
=cUmW
-----END PGP SIGNATURE-----
Merge tag 'input-for-v6.1-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov:
- a new driver for IBM Operational Panel
- a new driver for PinePhone keyboards
- RT5120 PMIC power key support
- various enhancements and support for new models in xpad (Xbox) driver
- a new compatible ID for Elan touchscreen driver
- rework of adp5588-keys driver to support configuring via device
properties (OF, ACPI, etc) instead of platform data, and proper
support of optional gpiochip functionality (and removal of
gpio-adp5588 driver)
- improvements to firmware update handling in Synaptics RMI4 driver
- support for double key matrix in mt6779-keypad
- support for polled mode in adc-joystick driver
- other assorted driver fixes, cleanups and improvements
* tag 'input-for-v6.1-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (90 commits)
Input: i8042 - fix refount leak on sparc
Input: i8042 - add LoongArch support in i8042-acpipnpio.h
Input: i8042 - rename i8042-x86ia64io.h to i8042-acpipnpio.h
Input: pinephone-keyboard - support the proxied I2C bus
Input: pinephone-keyboard - add PinePhone keyboard driver
dt-bindings: input: Add the PinePhone keyboard binding
dt-bindings: input: Convert hid-over-i2c to DT schema
input: drop empty comment blocks
Input: xpad - add X-Box Adaptive Profile button
Input: add ABS_PROFILE to uapi and documentation
Input: xpad - add X-Box Adaptive XBox button
Input: xpad - add X-Box Adaptive support
Input: ims-pcu - fix spelling mistake "BOOLTLOADER" -> "BOOTLOADER"
Input: ibm-panel - add missing MODULE_DEVICE_TABLE
Input: icn8505 - utilize acpi_get_subsystem_id()
Input: xpad - decipher xpadone packages with GIP defines
Input: xpad - refactor using BIT() macro
Input: synaptics-rmi4 - convert to use sysfs_emit() APIs
Input: twl4030-pwrbutton - add missing of.h include
Input: applespi - replace zero-length array with DECLARE_FLEX_ARRAY() helper
...
v6.0-rc1 + "[PATCH v6 0/7] add support for another simatic board" series
for merging into the gpio, leds and pdx86 subsystems.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEEuvA7XScYQRpenhd+kuxHeUQDJ9wFAmMQxTsUHGhkZWdvZWRl
QHJlZGhhdC5jb20ACgkQkuxHeUQDJ9zO/Qf/XqsHSH5WHqrto/MYJ2CEiTz8nXQD
BD6nQh9AxKDo1HpW9H3SiXZf/+iZrpmcJ9uq6buE9Ls1n6xrmCULs1LE6RIbyVXe
KKd1NlbWrBd9tVakmy/nQgwUOmTXORGJUbdHNIPcYMM6Me+8sj/oFEA5gIW70cBS
Itd7IKNT7hk63DFdNgw0b00vobnkSd8jIx+U8aHip8fq474N2BHR0amb36TxztSu
uvA5XVP1hcTBHSKjy5KArLiiKG2ttYkmKf9urULeQhT+rrZ25pjGpvETksAVfKBh
QPS957aEPhQrzzmXCO65+Qm4HfltjOJjbOUa42TICN4MaTJHiUtcGR/PVg==
=CvyP
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-simatec-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86 into gpio/for-next
Tag (immutable branch) for:
v6.0-rc1 + "[PATCH v6 0/7] add support for another simatic board" series
for merging into the gpio, leds and pdx86 subsystems.
Add GPIO support for Nuvoton NCT6116 chip. Nuvoton SuperIO chips are
very similar to the ones from Fintek. In other subsystems they also
share drivers and are called a family of drivers.
For the GPIO subsystem the only difference is that the direction bit is
reversed and that there is only one data bit per pin. On the SuperIO
level the logical device is another one.
On a chip level we do not have a manufacturer ID to check and also no
revision.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Simon Guinot <simon.guinot@sequanux.org>
Signed-off-by: Henning Schild <henning.schild@siemens.com>
Acked-by: Bartosz Golaszewski <brgl@bgdev.pl>
Link: https://lore.kernel.org/r/20220825104422.14156-4-henning.schild@siemens.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The SCU firmware on i.MX8 platforms provides a set of APIs to
control the GPIO PINs on the SCU domain. This patch implements the
standard GPIO driver interface to access those PINs on the
SCU domain over the SCU APIs.
Signed-off-by: Shenwei Wang <shenwei.wang@nxp.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
With commit 9d2b2e83ef ("Input: adp5588-keys - support gpi key events as
'gpio keys'") the irchip functionality is directly supported in the input
driver as the main goal of these pins is to be used as gpio keys. Hence,
this driver can be removed.
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Acked-by: Bartosz Golaszewski <brgl@bgdev.pl>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20220829131553.690063-3-nuno.sa@analog.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reduce magic numbers and improve code readability by implementing and
utilizing named register data structures. The GPIO-MM device features an
Intel 8255 compatible GPIO interface, so the i8255 GPIO module is
selected and utilized as well.
Tested-by: Fred Eckert <Frede@cmslaser.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Reduce magic numbers and improve code readability by implementing and
utilizing named register data structures. The 104-IDI-48 device features
an Intel 8255 compatible GPIO interface, so the i8255 GPIO module is
selected and utilized as well.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Cc: John Hentges <jhentges@accesio.com>
Cc: Jay Dolan <jay.dolan@accesio.com>
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Reduce magic numbers and improve code readability by implementing and
utilizing named register data structures. The 104-DIO-48E device
features an Intel 8255 compatible GPIO interface, so the i8255 GPIO
module is selected and utilized as well.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Cc: John Hentges <jhentges@accesio.com>
Cc: Jay Dolan <jay.dolan@accesio.com>
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Exposes consumer library functions providing support for interfaces
compatible with the venerable Intel 8255 Programmable Peripheral
Interface (PPI).
The Intel 8255 PPI first appeared in the early 1970s, initially for the
Intel 8080 and later appearing in the original IBM-PC. The popularity of
the original Intel 8255 chip led to many subsequent variants and clones
of the interface in various chips and integrated circuits. Although
still popular, interfaces compatible with the Intel 8255 PPI are
nowdays typically found embedded in larger VLSI processing chips and
FPGA components rather than as discrete ICs.
A CONFIG_GPIO_I8255 Kconfig option is introduced by this patch. Modules
wanting access to these i8255 library functions should select this
Kconfig option, and import the I8255 symbol namespace.
Tested-by: Fred Eckert <Frede@cmslaser.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Cc: John Hentges <jhentges@accesio.com>
Cc: Jay Dolan <jay.dolan@accesio.com>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Commit d3164e2f3b ("MIPS: Remove VR41xx support") removed support
for MIPS VR41xx platform, so remove exclusive drivers for this
platform, too.
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
The SAMA5D2 PIOBU is only present on some AT91/Microchip SoCs. Hence
add a dependency on ARCH_AT91, to prevent asking the user about this
driver when configuring a kernel without AT91/Microchip SoC support.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
i.MX7ULP, i.MX8 and i.MX9 use this driver, so drop
the SOC_VF610 dependcy to make the driver could be built
for i.MX platform.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
The boardfiles for IXP4xx have been deleted. Delete all the
quirks and code dealing with that boot path and rely solely on
device tree boot.
Fix some missing static keywords that the kernel test robot
was complaining about while we're at it.
Cc: Bartosz Golaszewski <brgl@bgdev.pl>
Acked-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
There are some special clock amendments for two machines
formerly detected by their machine_is() boardfile macro.
They are now migrated to device tree so use
of_machine_is_compatible() instead.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Here is the big set of char/misc and other small driver subsystem
updates for 5.18-rc1.
Included in here are merges from driver subsystems which contain:
- iio driver updates and new drivers
- fsi driver updates
- fpga driver updates
- habanalabs driver updates and support for new hardware
- soundwire driver updates and new drivers
- phy driver updates and new drivers
- coresight driver updates
- icc driver updates
Individual changes include:
- mei driver updates
- interconnect driver updates
- new PECI driver subsystem added
- vmci driver updates
- lots of tiny misc/char driver updates
There will be two merge conflicts with your tree, one in MAINTAINERS
which is obvious to fix up, and one in drivers/phy/freescale/Kconfig
which also should be easy to resolve.
All of these have been in linux-next for a while with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYkG3fQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykNEgCfaRG8CRxewDXOO4+GSeA3NGK+AIoAnR89donC
R4bgCjfg8BWIBcVVXg3/
=WWXC
-----END PGP SIGNATURE-----
Merge tag 'char-misc-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc and other driver updates from Greg KH:
"Here is the big set of char/misc and other small driver subsystem
updates for 5.18-rc1.
Included in here are merges from driver subsystems which contain:
- iio driver updates and new drivers
- fsi driver updates
- fpga driver updates
- habanalabs driver updates and support for new hardware
- soundwire driver updates and new drivers
- phy driver updates and new drivers
- coresight driver updates
- icc driver updates
Individual changes include:
- mei driver updates
- interconnect driver updates
- new PECI driver subsystem added
- vmci driver updates
- lots of tiny misc/char driver updates
All of these have been in linux-next for a while with no reported
problems"
* tag 'char-misc-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (556 commits)
firmware: google: Properly state IOMEM dependency
kgdbts: fix return value of __setup handler
firmware: sysfb: fix platform-device leak in error path
firmware: stratix10-svc: add missing callback parameter on RSU
arm64: dts: qcom: add non-secure domain property to fastrpc nodes
misc: fastrpc: Add dma handle implementation
misc: fastrpc: Add fdlist implementation
misc: fastrpc: Add helper function to get list and page
misc: fastrpc: Add support to secure memory map
dt-bindings: misc: add fastrpc domain vmid property
misc: fastrpc: check before loading process to the DSP
misc: fastrpc: add secure domain support
dt-bindings: misc: add property to support non-secure DSP
misc: fastrpc: Add support to get DSP capabilities
misc: fastrpc: add support for FASTRPC_IOCTL_MEM_MAP/UNMAP
misc: fastrpc: separate fastrpc device from channel context
dt-bindings: nvmem: brcm,nvram: add basic NVMEM cells
dt-bindings: nvmem: make "reg" property optional
nvmem: brcm_nvram: parse NVRAM content into NVMEM cells
nvmem: dt-bindings: Fix the error of dt-bindings check
...
* Set IRQ bus token in gpio-crystalcove to avoid debugfs error
* Check return value of kstrdup() in gpio-merrifield to error out earlier
* Clean up couple of drivers from unneeded of_node usage
* Allow gpio-tps68470 to be built as module to reduce memory foot print
The following is an automated git shortlog grouped by driver:
altera-a10sr:
- Switch to use fwnode instead of of_node
crystalcove:
- Set IRQ domain bus token to DOMAIN_BUS_WIRED
merrifield:
- check the return value of devm_kstrdup()
tegra:
- Get rid of duplicate of_node assignment
tps68470:
- Allow building as module
-----BEGIN PGP SIGNATURE-----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=rV4o
-----END PGP SIGNATURE-----
Merge tag 'intel-gpio-v5.18-1' of gitolite.kernel.org:pub/scm/linux/kernel/git/andy/linux-gpio-intel into gpio/for-next
intel-gpio for v5.18-1
* Set IRQ bus token in gpio-crystalcove to avoid debugfs error
* Check return value of kstrdup() in gpio-merrifield to error out earlier
* Clean up couple of drivers from unneeded of_node usage
* Allow gpio-tps68470 to be built as module to reduce memory foot print
Delta TN48M switch has an onboard Lattice CPLD that is used as a GPIO
expander.
The CPLD provides 12 pins in total on the TN48M, but on more advanced
switch models it provides up to 192 pins, so the driver is extendable
to support more switches.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Michael Walle <michael@walle.cc>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Bartosz Golaszewski <brgl@bgdev.pl>
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Link: https://lore.kernel.org/r/20220131133049.77780-3-robert.marko@sartura.hr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Airoha's GPIO controller on their ARM EN7523 SoCs consists of two banks of 32
GPIOs. Each instance in DT is for a single bank.
Acked-by: Bartosz Golaszewski <brgl@bgdev.pl>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
The gpio-tps68470 driver binds to a tps68470-gpio platform-device which
itself gets instantiated by a special MFD driver from
drivers/platform/x86/intel/int3472/tps68470.c
This MFD driver itself can be built as a module, so it makes no sense to
force the gpio-tps68470 driver to always be built-in.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
- new testing module: gpio-sim that is scheduled to replace gpio-mockup
- initial changes aiming at converting all GPIO drivers to using the fwnode
interface and limiting any references to OF symbols to gpiolib-of.c
- add support for Tegra234 and Tegra241 to gpio-tegra186
- add support for new models (SSD201 and SSD202D) to gpio-msc313
- add basic support for interrupts to gpio-aggregator
- add support for AMDIF031 HID device to gpio-amdpt
- drop support for unused platforms in gpio-xlp
- cleanup leftovers from the removal of the legacy Samsung Exynos GPIO driver
- use raw spinlocks in gpio-aspeed and gpio-aspeed-sgpio to make PREEMPT_RT
happy
- generalize the common 'ngpios' device property by reading it in the core
gpiolib code so that we can remove duplicate reads from drivers
- allow line names from device properties to override names set by drivers
- code shrink in gpiod_add_lookup_table()
- add new model to the DT bindings for gpio-vf610
- convert DT bindings for tegra devices to YAML
- improvements to interrupt handling in gpio-rcar and gpio-rockchip
- updates to intel drivers from Andy (details in the merge commit)
- some minor tweaks, improvements and coding-style fixes all around the
subsystem
-----BEGIN PGP SIGNATURE-----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=OUhL
-----END PGP SIGNATURE-----
Merge tag 'gpio-updates-for-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski:
"The gpio-sim module is back, this time without any changes to
configfs. This results in a less elegant user-space interface but I
never got any follow-up on the committable items and didn't want to
delay this module for several more months.
Other than that we have support for several new models and some
support going away. We started working on converting GPIO drivers to
using fwnode exclusively in order to limit references to OF symbols to
gpiolib-of.c exclusively. We also have regular tweaks and improvements
all over the place.
Summary:
- new testing module: gpio-sim that is scheduled to replace
gpio-mockup
- initial changes aiming at converting all GPIO drivers to using the
fwnode interface and limiting any references to OF symbols to
gpiolib-of.c
- add support for Tegra234 and Tegra241 to gpio-tegra186
- add support for new models (SSD201 and SSD202D) to gpio-msc313
- add basic support for interrupts to gpio-aggregator
- add support for AMDIF031 HID device to gpio-amdpt
- drop support for unused platforms in gpio-xlp
- cleanup leftovers from the removal of the legacy Samsung Exynos
GPIO driver
- use raw spinlocks in gpio-aspeed and gpio-aspeed-sgpio to make
PREEMPT_RT happy
- generalize the common 'ngpios' device property by reading it in the
core gpiolib code so that we can remove duplicate reads from
drivers
- allow line names from device properties to override names set by
drivers
- code shrink in gpiod_add_lookup_table()
- add new model to the DT bindings for gpio-vf610
- convert DT bindings for tegra devices to YAML
- improvements to interrupt handling in gpio-rcar and gpio-rockchip
- updates to intel drivers from Andy (details in the merge commit)
- some minor tweaks, improvements and coding-style fixes all around
the subsystem"
* tag 'gpio-updates-for-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (59 commits)
gpio: rcar: Propagate errors from devm_request_irq()
gpio: rcar: Use platform_get_irq() to get the interrupt
gpio: ts5500: Use platform_get_irq() to get the interrupt
gpio: dwapb: Switch to use fwnode instead of of_node
gpiolib: acpi: make fwnode take precedence in struct gpio_chip
dt-bindings: gpio: samsung: drop unused bindings
gpio: max3191x: Use bitmap_free() to free bitmap
gpio: regmap: Switch to use fwnode instead of of_node
gpio: tegra186: Add support for Tegra241
dt-bindings: gpio: Add Tegra241 support
gpio: brcmstb: Use local variable to access OF node
gpio: Remove unused local OF node pointers
gpio: sim: add missing fwnode_handle_put() in gpio_sim_probe()
gpio: msc313: Add support for SSD201 and SSD202D
gpio: msc313: Code clean ups
dt-bindings: gpio: msc313: Add offsets for ssd20xd
dt-bindings: gpio: msc313: Add compatible for ssd20xd
gpio: sim: fix uninitialized ret variable
gpio: Propagate firmware node from a parent device
gpio: Setup parent device and get rid of unnecessary of_node assignment
...
- Add support for Lakefield PCH to Intel LPSS PCI
- Remove Device Support
- Remove support for ROHM BD70528 Power Management IC
- New Functionality
- Add support for SMBus and I2C mode to Dialog DA9062/61 PMIC
- Enable I2C4 on Microsoft Surface Go & Go 2
- Fix-ups
- Device Tree changes (inc. YAML conversion); maxim,max77686,
rohm,bd9571mwv, syscon, brcm,twd, google,cros-ec
- Use __maybe_unused instead of #ifery; atmel-flexcom
- Allow the Regmap API to handle endianess internally; ntxec
- Utilise I2C's .resume_noirq call-back; atmel-flexcom
- Remove unused code; ti_am335x_tscadc
- Use CPU-id instead of ACPI _HRV to ID variants; intel_soc_pmic_core
- Allow device to power-off right from .probe(); tps65910
- Trivial (whitespace, typos, etc); da9063
- Bug Fixes
- Fix ordering issues during probe; intel-lpss-acpi
- Fix correct clock speed; intel-lpss-pci
-----BEGIN PGP SIGNATURE-----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=acuh
-----END PGP SIGNATURE-----
Merge tag 'mfd-next-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
"New Device Support:
- Add support for Lakefield PCH to Intel LPSS PCI
Remove Device Support:
- Remove support for ROHM BD70528 Power Management IC
New Functionality:
- Add support for SMBus and I2C mode to Dialog DA9062/61 PMIC
- Enable I2C4 on Microsoft Surface Go & Go 2
Fix-ups:
- Device Tree changes (inc. YAML conversion); maxim,max77686,
rohm,bd9571mwv, syscon, brcm,twd, google,cros-ec
- Use __maybe_unused instead of #ifery; atmel-flexcom
- Allow the Regmap API to handle endianess internally; ntxec
- Utilise I2C's .resume_noirq call-back; atmel-flexcom
- Remove unused code; ti_am335x_tscadc
- Use CPU-id instead of ACPI _HRV to ID variants; intel_soc_pmic_core
- Allow device to power-off right from .probe(); tps65910
- Trivial (whitespace, typos, etc); da9063
Bug Fixes:
- Fix ordering issues during probe; intel-lpss-acpi
- Fix correct clock speed; intel-lpss-pci"
* tag 'mfd-next-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (25 commits)
mfd: google,cros-ec: Fix property name for MediaTek rpmsg
dt-bindings: mfd: Fix typo "DA9093" -> "DA9063"
mfd: ntxec: Change return type of ntxec_reg8 from __be16 to u16
mfd: tps65910: Set PWR_OFF bit during driver probe
mfd: intel_soc_pmic: Use CPU-id check instead of _HRV check to differentiate variants
mfd: intel-lpss: Fix I2C4 not being available on the Microsoft Surface Go & Go 2
dt-bindings: mfd: Add Broadcom's Timer-Watchdog block
dt-bindings: mfd: Add Freecom system controller
mfd: Kconfig: Change INTEL_SOC_PMIC_CHTDC_TI to bool
dt-bindings: mfd: syscon: Add samsung,exynos850-sysreg
mfd: da9062: Support SMBus and I2C mode
mfd: intel-lpss-pci: Fix clock speed for 38a8 UART
mfd: intel-lpss: Fix too early PM enablement in the ACPI ->probe()
mfd: ti_am335x_tscadc: Drop the CNTRLREG_TSC_8WIRE macro
mfd: stmpe: Support disabling sub-functions
mfd: atmel-flexcom: Use .resume_noirq
mfd: atmel-flexcom: Remove #ifdef CONFIG_PM_SLEEP
dt-bindings: mfd: bd9571mwv: Convert to json-schema
mfd: intel-lpss: Add Intel Lakefield PCH PCI IDs
dt-bindings: mfd: maxim,max77686: Convert to dtschema
...
Implement a new, modern GPIO testing module controlled by configfs
attributes instead of module parameters. The goal of this driver is
to provide a replacement for gpio-mockup that will be easily extensible
with new features and doesn't require reloading the module to change
the setup.
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
The only known BD70528 use-cases are such that the PMIC is controlled
from separate MCU which is not running Linux. I am not aware of
any Linux driver users. Furthermore, it seems there is no demand for
this IC. Let's ease the maintenance burden and drop the driver. We can
always add it back if there is sudden need for it.
Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Acked-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/4eff6bd5eff8afc137dd8c1697cb5c6b2e3aacd2.1637066805.git.matti.vaittinen@fi.rohmeurope.com
gpio-rockchip uses interfaces that are provided by the Kconfig
symbol GENERIC_IRQ_CHIP, so the driver should select that symbol
in order to prevent build errors.
Fixes these build errors (and more):
aarch64-linux-ld: drivers/gpio/gpio-rockchip.o: in function `rockchip_irq_disable':
gpio-rockchip.c:(.text+0x454): undefined reference to `irq_gc_mask_set_bit'
aarch64-linux-ld: drivers/gpio/gpio-rockchip.o: in function `rockchip_irq_enable':
gpio-rockchip.c:(.text+0x478): undefined reference to `irq_gc_mask_clr_bit'
aarch64-linux-ld: drivers/gpio/gpio-rockchip.o: in function `rockchip_interrupts_register':
gpio-rockchip.c:(.text+0x518): undefined reference to `irq_generic_chip_ops'
aarch64-linux-ld: gpio-rockchip.c:(.text+0x594): undefined reference to `__irq_alloc_domain_generic_chips'
aarch64-linux-ld: gpio-rockchip.c:(.text+0x5cc): undefined reference to `irq_get_domain_generic_chip'
aarch64-linux-ld: gpio-rockchip.c:(.text+0x5e0): undefined reference to `irq_gc_ack_set_bit'
aarch64-linux-ld: gpio-rockchip.c:(.text+0x604): undefined reference to `irq_gc_set_wake'
Fixes: 936ee2675e ("gpio/rockchip: add driver for rockchip gpio")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Netlogic XLP was removed in commit 95b8a5e011 ("MIPS: Remove NETLOGIC
support"). With those gone, the single platform left to support is
Cavium ThunderX2. Remove all the Netlogic variants and DT support.
For simplicity, the existing kconfig name is retained.
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Bartosz Golaszewski <brgl@bgdev.pl>
Cc: linux-gpio@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
This patch adds IRQ support for the virtio GPIO driver. Note that this
uses the irq_bus_lock/unlock() callbacks, since those operations over
virtio may sleep.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
This patch adds driver support for the zynqmp modepin GPIO controller.
GPIO modepin driver set and get the value and status of the PS_MODE pin,
based on device-tree pin configuration. These four mode pins are
configurable as input/output. The mode pin has a control register, which
have lower four-bits [0:3] are configurable as input/output, next four-bits
can be used for reading the data as input[4:7], and next setting the
output pin state output[8:11]. By default value of mode pin register is 0.
Signed-off-by: Piyush Mehta <piyush.mehta@xilinx.com>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
This patch adds a new driver for Virtio based GPIO devices.
This allows a guest VM running Linux to access GPIO lines provided by
the host. It supports all basic operations, except interrupts for the
GPIO lines.
Based on the initial work posted by:
"Enrico Weigelt, metux IT consult" <lkml@metux.net>.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
This patch add support for rockchip gpio controller, which is supported
in pinctrl driver in the past.
With this patch, the pinctrl-rockchip driver will drop gpio related
codes and populate platform driver to gpio-rockchip.
Signed-off-by: Jianqun Xu <jay.xu@rock-chips.com>
Link: https://lore.kernel.org/r/20210816012053.1119069-1-jay.xu@rock-chips.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
- new driver for the IDT 79RC3243x GPIO controller
- device tree bindings coversion to YAML for the following drivers:
gpio-rk3328-grf, gpio-omap, gpio-davinci, gpio-zynq, gpio-stp, gpio-pcf857x
- cleanup of probe functions in many drivers from Alexandru Ardelean, mostly
dropping unnecessary calls to platform_set_drvdata() and removing error
messages where none are needed (handled by the subsystem already)
- several improvements to the core gpiolib and the sysfs interface code from
Andy Shevchenko
- conversion of the gpio-xilinx driver to using the bitmap API + improvements
of suspend/resume handling + minor tweaks
- convert the gpio-stmpe to using devres helpers exclusively in probe for
improved robustness
- updates for the generic gpio-regmap driver
- updates for the gpio-dwapb driver
- support for a new model in gpio-pca953x
- cleanups in gpio-tegra186, gpio-104-idio-16, gpio-mxs & gpio-xgene
- slight code refactoring of the gpio-zynq driver
- documentation fixes from Mauro Carvalho Chehab
- a bunch of minor tweaks and improvements all over the place
-----BEGIN PGP SIGNATURE-----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=IF0T
-----END PGP SIGNATURE-----
Merge tag 'gpio-updates-for-v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski:
"One new driver, support for new models in existing ones, dt-bindings
conversions for several modules and improvements all over the place.
Summary:
- new driver for the IDT 79RC3243x GPIO controller
- device tree bindings coversion to YAML for the following drivers:
gpio-rk3328-grf, gpio-omap, gpio-davinci, gpio-zynq, gpio-stp,
gpio-pcf857x
- cleanup of probe functions in many drivers from Alexandru Ardelean,
mostly dropping unnecessary calls to platform_set_drvdata() and
removing error messages where none are needed (handled by the
subsystem already)
- several improvements to the core gpiolib and the sysfs interface
code from Andy Shevchenko
- conversion of the gpio-xilinx driver to using the bitmap API +
improvements of suspend/resume handling + minor tweaks
- convert the gpio-stmpe to using devres helpers exclusively in probe
for improved robustness
- updates for the generic gpio-regmap driver
- updates for the gpio-dwapb driver
- support for a new model in gpio-pca953x
- cleanups in gpio-tegra186, gpio-104-idio-16, gpio-mxs & gpio-xgene
- slight code refactoring of the gpio-zynq driver
- documentation fixes from Mauro Carvalho Chehab
- a bunch of minor tweaks and improvements all over the place"
* tag 'gpio-updates-for-v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (57 commits)
docs: driver-api: gpio: using-gpio.rst: avoid using ReST :doc:`foo` markup
dt-bindings: gpio: pcf857x: Convert to json-schema
gpio: mxs: Prefer unsigned int to bare use of unsigned
dt-bindings: gpio: stp: convert to json-schema
dt-bindings: gpio: zynq: convert bindings to YAML
dt-bindings: gpio: gpio-davinci: Convert to json-schema
gpio: pca953x: Add support for the On Semi pca9655
gpio: gpio-xilinx: update on suspend and resume calls
gpio: zynq: Check return value of irq_get_irq_data
gpio: zynq: Check return value of pm_runtime_get_sync
gpio: zynq: use module_platform_driver to simplify the code
gpio: idt3243x: Fix return value check in idt_gpio_probe()
MAINTAINERS: update ti,omap-gpio.yaml reference
dt-bindings: gpio: Add devicetree binding for IDT 79RC32434 GPIO controller
gpio: Add support for IDT 79RC3243x GPIO controller
gpio: regmap: move drvdata to config data
gpio-dwapb: Drop unused headers and sort the rest
gpio: gpio-regmap: Use devm_add_action_or_reset()
gpio: dwapb: Switch to use fwnode_irq_get()
gpio: dwapb: Drop redundant check in dwapb_irq_set_type()
...
Highlights:
- New think-lmi driver adding support for changing BIOS settings from
within Linux using the standard firmware-attributes class sysfs API
- MS Surface aggregator-cdev now also supports forwarding events to
user-space (for debugging / new driver development purposes only)
- New intel_skl_int3472 driver this provides the necessary glue to
translate ACPI table information to GPIOs, regulators, etc. for
camera sensors on Intel devices with IPU3 attached MIPI cameras
- A whole bunch of other fixes + device-specific quirk additions
- New devm_work_autocancel() devm-helpers.h function
Note this also contains merges of the following immutable branches/tags
shared with other subsystems:
- platform-drivers-x86-goodix-v5.14-1
- intel-gpio-v5.14-1
- linux-pm/acpi-scan
- devm-helpers-v5.14-1
The following is an automated git shortlog grouped by driver:
ACPI:
- scan: initialize local variable to avoid garbage being returned
- scan: Add function to fetch dependent of ACPI device
- scan: Extend acpi_walk_dep_device_list()
- scan: Rearrange dep_unmet initialization
Add intel_skl_int3472 driver:
- Add intel_skl_int3472 driver
ISST:
- Use numa node id for cpu pci dev mapping
- Optimize CPU to PCI device mapping
Input:
- goodix - platform/x86: touchscreen_dmi - Move upside down quirks to touchscreen_dmi.c
MAINTAINERS:
- Update IRC link for Surface System Aggregator subsystem
- Update info for telemetry
Merge remote-tracking branch 'linux-pm/acpi-scan' into review-hans:
- Merge remote-tracking branch 'linux-pm/acpi-scan' into review-hans
Merge tag 'devm-helpers-v5.14-1' into review-hans:
- Merge tag 'devm-helpers-v5.14-1' into review-hans
Merge tag 'intel-gpio-v5.14-1' into review-hans:
- Merge tag 'intel-gpio-v5.14-1' into review-hans
Merge tag 'platform-drivers-x86-goodix-v5.14-1' into review-hans:
- Merge tag 'platform-drivers-x86-goodix-v5.14-1' into review-hans
Remove "default n" entries:
- Remove "default n" entries
Rename hp-wireless to wireless-hotkey:
- Rename hp-wireless to wireless-hotkey
asus-nb-wmi:
- Revert "add support for ASUS ROG Zephyrus G14 and G15"
- Revert "Drop duplicate DMI quirk structures"
dcdbas:
- drop unneeded assignment in host_control_smi()
dell-privacy:
- Add support for Dell hardware privacy
dell-wmi:
- Rename dell-wmi.c to dell-wmi-base.c
dell-wmi-sysman:
- Change user experience when Admin/System Password is modified
- fw_attr_inuse can be static
- Use firmware_attributes_class helper
- Make populate_foo_data functions more robust
dell-wmi-sysman/think-lmi:
- Make fw_attr_class global static
devm-helpers:
- Add resource managed version of work init
docs:
- driver-api: Update Surface Aggregator user-space interface documentation
extcon:
- extcon-max8997: Simplify driver using devm
- extcon-max8997: Fix IRQ freeing at error path
- extcon-max77693.c: Fix potential work-queue cancellation race
- extcon-max14577: Fix potential work-queue cancellation race
firmware_attributes_class:
- Create helper file for handling firmware-attributes class registration events
gpio:
- wcove: Split error handling for CTRL and IRQ registers
- wcove: Unify style of to_reg() with to_ireg()
- wcove: Use IRQ hardware number getter instead of direct access
- crystalcove: remove platform_set_drvdata() + cleanup probe
gpiolib:
- acpi: Add acpi_gpio_get_io_resource()
- acpi: Introduce acpi_get_and_request_gpiod() helper
hdaps:
- Constify static attribute_group struct
ideapad-laptop:
- Ignore VPC event bit 10
intel_cht_int33fe:
- Move to its own subfolder
- Correct "displayport" fwnode reference
intel_ips:
- fix set but unused warning in read_mgtv
intel_pmt_crashlog:
- Constify static attribute_group struct
intel_skl_int3472:
- Uninitialized variable in skl_int3472_handle_gpio_resources()
- Move to intel/ subfolder
- Provide skl_int3472_unregister_clock()
- Provide skl_int3472_unregister_regulator()
- Use ACPI GPIO resource directly
- Fix dependencies (drop CLKDEV_LOOKUP)
- Free ACPI device resources after use
mfd:
- tps68470: Remove tps68470 MFD driver
platform/mellanox:
- mlxreg-hotplug: Revert "move to use request_irq by IRQF_NO_AUTOEN flag"
platform/surface:
- aggregator: Use list_move_tail instead of list_del/list_add_tail in ssh_packet_layer.c
- aggregator: Use list_move_tail instead of list_del/list_add_tail in ssh_request_layer.c
- aggregator: Drop unnecessary variable initialization
- aggregator: Do not return uninitialized value
- aggregator_cdev: Add lockdep support
- aggregator_cdev: Allow enabling of events from user-space
- aggregator_cdev: Add support for forwarding events to user-space
- aggregator: Update copyright
- aggregator: Allow enabling of events without notifiers
- aggregator: Allow registering notifiers without enabling events
- dtx: Add missing mutex_destroy() call in failure path
- aggregator: Fix event disable function
- aggregator_registry: Consolidate node groups for 5th- and 6th-gen devices
- aggregator_registry: Add support for 13" Intel Surface Laptop 4
- aggregator_registry: Update comments for 15" AMD Surface Laptop 4
samsung-laptop:
- set debugfs blobs to read only
- use octal numbers for rwx file permissions
tc1100-wmi:
- Constify static attribute_group struct
think-lmi:
- Move kfree(setting->possible_values) to tlmi_attr_setting_release()
- Split current_value to reflect only the value
- Fix issues with duplicate attributes
- Return EINVAL when kbdlang gets set to a 0 length string
- Add missing MODULE_DEVICE_TABLE
- Avoid potential read before start of the buffer
- Fix check for admin password being set
- Add WMI interface support on Lenovo platforms
thinkpad-lmi:
- Remove unused display_name member from struct tlmi_pwd_setting
thinkpad_acpi:
- Add X1 Carbon Gen 9 second fan support
- Fix inconsistent indenting
tools/power/x86/intel-speed-select:
- v1.10 release
- Fix uncore memory frequency display
toshiba_acpi:
- Fix missing error code in toshiba_acpi_setup_keyboard()
toshiba_haps:
- Fix missing newline in pr_debug call in toshiba_haps_notify
touchscreen_dmi:
- Fix Chuwi Hi10 Pro comment
- Add info for the Goodix GT912 panel of TM800A550L tablets
- Add an extra entry for the upside down Goodix touchscreen on Teclast X89 tablets
x86/platform/uv:
- Constify static attribute_group struct
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEEuvA7XScYQRpenhd+kuxHeUQDJ9wFAmDbELwUHGhkZWdvZWRl
QHJlZGhhdC5jb20ACgkQkuxHeUQDJ9yp2wgAj1mTOJi/4Rx1g8wXLpP/hflEkFMU
yyMeKe3LOEzuo/LZUfW4tqWiXa4aTgN6rUOF8KUumsIor/72hKcczuPVY+qCqF7V
qYZ0vMG93DfAyVPQvBrNjHMXiVevD/gMFRqJEOOgXt96B6Zea4vh1pBvLACAHFZ0
bjkZDX3cO89TSfUF7uhiU9UkMvMMAVs34Knc1Pe4QnZ16e2kPGcKip3qb73yT+xC
8NVRgE6fdSIJfDAVzqpdh91rfDdzHDJ6vT10uijOTkriJciN07UKtYuK5StCpAo5
sXIQllHySHRHj5N0IWZ04w6RMQ+l/9CaHDttkYWW3fV1EU9SVzvp/+d6zA==
=tAuE
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v5.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver updates from Hans de Goede:
"Highlights:
- New think-lmi driver adding support for changing Lenovo Thinkpad
BIOS settings from within Linux using the standard firmware-
attributes class sysfs API
- MS Surface aggregator-cdev now also supports forwarding events to
user-space (for debugging / new driver development purposes only)
- New intel_skl_int3472 driver this provides the necessary glue to
translate ACPI table information to GPIOs, regulators, etc. for
camera sensors on Intel devices with IPU3 attached MIPI cameras
- A whole bunch of other fixes + device-specific quirk additions
- New devm_work_autocancel() devm-helpers.h function"
* tag 'platform-drivers-x86-v5.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (83 commits)
platform/x86: dell-wmi-sysman: Change user experience when Admin/System Password is modified
platform/x86: intel_skl_int3472: Uninitialized variable in skl_int3472_handle_gpio_resources()
platform/x86: think-lmi: Move kfree(setting->possible_values) to tlmi_attr_setting_release()
platform/x86: think-lmi: Split current_value to reflect only the value
platform/x86: think-lmi: Fix issues with duplicate attributes
platform/x86: think-lmi: Return EINVAL when kbdlang gets set to a 0 length string
platform/x86: intel_cht_int33fe: Move to its own subfolder
platform/x86: intel_skl_int3472: Move to intel/ subfolder
platform/x86: intel_skl_int3472: Provide skl_int3472_unregister_clock()
platform/x86: intel_skl_int3472: Provide skl_int3472_unregister_regulator()
platform/x86: intel_skl_int3472: Use ACPI GPIO resource directly
platform/x86: intel_skl_int3472: Fix dependencies (drop CLKDEV_LOOKUP)
platform/x86: intel_skl_int3472: Free ACPI device resources after use
platform/x86: Remove "default n" entries
platform/x86: ISST: Use numa node id for cpu pci dev mapping
platform/x86: ISST: Optimize CPU to PCI device mapping
tools/power/x86/intel-speed-select: v1.10 release
tools/power/x86/intel-speed-select: Fix uncore memory frequency display
extcon: extcon-max8997: Simplify driver using devm
extcon: extcon-max8997: Fix IRQ freeing at error path
...
Both of these drivers use ioport_map(), so they need to
depend on HAS_IOPORT_MAP. Otherwise, they cannot be built
even with COMPILE_TEST on architectures without an ioport
implementation, such as ARCH=um.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
This driver only covered one scenario in which ACPI devices with _HID
INT3472 are found, and its functionality has been taken over by the
intel-skl-int3472 module, so remove it.
Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Daniel Scally <djrscally@gmail.com>
Link: https://lore.kernel.org/r/20210603224007.120560-7-djrscally@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
IDT 79RC3243x SoCs integrated a gpio controller, which handles up
to 32 gpios. All gpios could be used as an interrupt source.
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
- new driver for the Realtek Otto GPIO controller
- ACPI support for gpio-mpc8xxx
- edge event support for gpio-sch (+ Kconfig fixes)
- Kconfig improvements in gpio-ich
- fixes to older issues in gpio-mockup
- ACPI quirk for ignoring EC wakeups on Dell Venue 10 Pro 5055
- improve the GPIO aggregator code by using more generic interfaces instead of
reimplementing them in the driver
- convert the DT bindings for gpio-74x164 to yaml
- documentation improvements
- a slew of other minor fixes and improvements to GPIO drivers
-----BEGIN PGP SIGNATURE-----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=5vLN
-----END PGP SIGNATURE-----
Merge tag 'gpio-updates-for-v5.13-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski:
- new driver for the Realtek Otto GPIO controller
- ACPI support for gpio-mpc8xxx
- edge event support for gpio-sch (+ Kconfig fixes)
- Kconfig improvements in gpio-ich
- fixes to older issues in gpio-mockup
- ACPI quirk for ignoring EC wakeups on Dell Venue 10 Pro 5055
- improve the GPIO aggregator code by using more generic interfaces
instead of reimplementing them in the driver
- convert the DT bindings for gpio-74x164 to yaml
- documentation improvements
- a slew of other minor fixes and improvements to GPIO drivers
* tag 'gpio-updates-for-v5.13-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (34 commits)
dt-bindings: gpio: add YAML description for rockchip,gpio-bank
gpio: mxs: remove useless function
dt-bindings: gpio: fairchild,74hc595: Convert to json-schema
gpio: it87: remove unused code
gpio: 104-dio-48e: Fix coding style issues
gpio: mpc8xxx: Add ACPI support
gpio: ich: Switch to be dependent on LPC_ICH
gpio: sch: Drop MFD_CORE selection
gpio: sch: depends on LPC_SCH
gpiolib: acpi: Add quirk to ignore EC wakeups on Dell Venue 10 Pro 5055
gpio: sch: Hook into ACPI GPE handler to catch GPIO edge events
gpio: sch: Add edge event support
gpio: aggregator: Replace custom get_arg() with a generic next_arg()
lib/cmdline: Export next_arg() for being used in modules
gpio: omap: Use device_get_match_data() helper
gpio: Add Realtek Otto GPIO support
dt-bindings: gpio: Binding for Realtek Otto GPIO
docs: kernel-parameters: Add gpio_mockup_named_lines
docs: kernel-parameters: Move gpio-mockup for alphabetic order
lib: bitmap: provide devm_bitmap_alloc() and devm_bitmap_zalloc()
...
Driver is neither dependent to PCI nor using MFD_CORE.
Replace those dependency and selection by dependency on LPC_ICH.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Since we are depended on LPC_SCH, which selects MFD_CORE,
we don't need to do it ourselves.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Since LPC_SCH provides GPIO functionality, GPIO_SCH should depend on
LPC_SCH to prevent kconfig warning and build errors:
WARNING: unmet direct dependencies detected for LPC_SCH
Depends on [n]: HAS_IOMEM [=y] && PCI [=n]
Selected by [y]:
- GPIO_SCH [=y] && GPIOLIB [=y] && X86 [=y] && (X86 [=y] || COMPILE_TEST [=n]) && ACPI [=y]
and
../drivers/mfd/lpc_sch.c:204:1: warning: data definition has no type or storage class
module_pci_driver(lpc_sch_driver);
^~~~~~~~~~~~~~~~~
../drivers/mfd/lpc_sch.c:204:1: error: type defaults to ‘int’ in declaration of ‘module_pci_driver’ [-Werror=implicit-int]
../drivers/mfd/lpc_sch.c:204:1: warning: parameter names (without types) in function declaration
../drivers/mfd/lpc_sch.c:197:26: warning: ‘lpc_sch_driver’ defined but not used [-Wunused-variable]
static struct pci_driver lpc_sch_driver = {
^~~~~~~~~~~~~~
Fixes: 6c46215d6b62 ("gpio: sch: Hook into ACPI GPE handler to catch GPIO edge events")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: linux-gpio@vger.kernel.org
Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Cc: Denis Turischev <denis@compulab.co.il>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Neither the ACPI description on Intel Minnowboard (v1) platform provides
the required information to establish a generic handling nor the hardware
capable of doing it. According to the data sheet the hardware can generate
SCI events. Therefore, we need to hook from the driver into GPE handler of
the ACPI subsystem in order to catch and report GPIO-related events.
Validated on the Inlel Minnowboard (v1) platform and Intel Galileo Gen 2.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Add the required infrastructure to enable and report edge events
of the pins to the GPIO core. The actual hook-up of the event interrupt
will happen separately.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Co-developed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Realtek MIPS SoCs (platform name Otto) have GPIO controllers with up to
64 GPIOs, divided over two banks. Each bank has a set of registers for
32 GPIOs, with support for edge-triggered interrupts.
Each GPIO bank consists of four 8-bit GPIO ports (ABCD and EFGH). Most
registers pack one bit per GPIO, except for the IMR register, which
packs two bits per GPIO (AB-CD).
Although the byte order is currently assumed to have port A..D at offset
0x0..0x3, this has been observed to be reversed on other, Lexra-based,
SoCs (e.g. RTL8196E/97D/97F).
Interrupt support is disabled for the fallback devicetree-compatible
'realtek,otto-gpio'. This allows for quick support of GPIO banks in
which the byte order would be unknown. In this case, the port ordering
in the IMR registers may not match the reversed order in the other
registers (DCBA, and BA-DC or DC-BA).
Signed-off-by: Sander Vanheule <sander@svanheule.net>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Support GPO(s) found from ROHM BD71815 power management IC. The IC has two
GPO pins but only one is properly documented in the data-sheet. The driver
exposes by default only the documented GPO. The second GPO is connected to
E5 pin and is marked as GND in the data-sheet. Control for this
undocumented pin can be enabled using a special DT property.
This driver is derived from work by Peter Yang <yanglsh@embest-tech.com>
although not so much of the original is left.
Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Acked-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Adds interrupt support to the Xilinx GPIO driver so that rising and
falling edge line events can be supported. Since interrupt support is
an optional feature in the Xilinx IP, the driver continues to support
devices which have no interrupt provided.
Depends on OF_GPIO framework for of_xlate function to translate
gpiospec to the GPIO number and flags.
Signed-off-by: Robert Hancock <hancock@sedsystems.ca>
Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com>
Signed-off-by: Srinivas Neeli <srinivas.neeli@xilinx.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Intel Moorestown and Medfield are quite old Intel Atom based
32-bit platforms, which were in limited use in some Android phones,
tablets and consumer electronics more than eight years ago.
There are no bugs or problems ever reported outside from Intel
for breaking any of that platforms for years. It seems no real
users exists who run more or less fresh kernel on it. The commit
05f4434bc1 ("ASoC: Intel: remove mfld_machine") also in align
with this theory.
Due to above and to reduce a burden of supporting outdated drivers
we remove the support of outdated platforms completely.
Moreover this code duplicates gpio-pxa since the IP has been derived
from XScale implementation. If anybody wants to resurrect this
it has to be part of gpio-pxa.c.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Intel Moorestown and Medfield are quite old Intel Atom based
32-bit platforms, which were in limited use in some Android phones,
tablets and consumer electronics more than eight years ago.
There are no bugs or problems ever reported outside from Intel
for breaking any of that platforms for years. It seems no real
users exists who run more or less fresh kernel on it. The commit
05f4434bc1 ("ASoC: Intel: remove mfld_machine") also in align
with this theory.
Due to above and to reduce a burden of supporting outdated drivers
we remove the support of outdated platforms completely.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Support building driver as a loadable kernel module. This allows to
reduce size of a kernel zImage, which is important for some devices
since size of kernel partition may be limited and since some bootloader
variants have known problems in regards to the initrd placement if kernel
image is too big.
$ lsmod
Module Size Used by
gpio_tegra 16384 27
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
gpio-mockup doesn't require SYSFS to be selected so drop that bit from
the Kconfig text.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
The zte zx platform is getting removed, so this driver is no
longer needed.
Cc: Jun Nie <jun.nie@linaro.org>
Cc: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
There is a spelling mistake in the Kconfig help text. Fix it.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Merely enabling CONFIG_COMPILE_TEST should not enable additional code.
To fix this, restrict the automatic enabling of GPIO_MXS to ARCH_MXS,
and ask the user in case of compile-testing.
Fixes: 6876ca311b ("gpio: mxs: add COMPILE_TEST support for GPIO_MXS")
Cc: <stable@vger.kernel.org>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Commit efcdca286eef ("gpio: tegra: Convert to gpio_irq_chip") moved the
Tegra GPIO driver to the generic GPIO IRQ chip infrastructure and made
the IRQ domain hierarchical, so the driver needs to pull in the support
infrastructure via the GPIOLIB_IRQCHIP and IRQ_DOMAIN_HIERARCHY Kconfig
options.
Fixes: efcdca286eef ("gpio: tegra: Convert to gpio_irq_chip")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
This is the only driver in the kernel source tree that depends on
IRQ_DOMAIN_HIERARCHY instead of selecting it. Since it is not a
visible Kconfig symbol, depending on it (expecting a user to
set/enable it) doesn't make much sense, so change it to select
instead of "depends on".
Fixes: 96868dce64 ("gpio/sifive: Add GPIO driver for SiFive SoCs")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Cc: linux-gpio@vger.kernel.org
Cc: Thierry Reding <treding@nvidia.com>
Cc: Greentime Hu <greentime.hu@sifive.com>
Cc: Yash Shah <yash.shah@sifive.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Make it clear that ACPI needs to be present only to get driver functional.
It is not required for compilation.
Fixes: 356b01a986 ("gpio: gpio-hisi: Add HiSilicon GPIO support")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20201214165524.43843-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This GPIO driver is for HiSilicon's ARM SoC.
HiSilicon's GPIO controller support double-edge interrupt and multi-core
concurrent access.
ACPI table example for this GPIO controller:
Device (GPO0)
{
Name (_HID, "HISI0184")
Device (PRTA)
{
Name (_ADR, Zero)
Name (_UID, Zero)
Name (_DSD, Package (0x01)
{
Package (0x02)
{
"ngpios",
0x20
}
})
}
}
Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com>
Link: https://lore.kernel.org/r/1607934255-52544-2-git-send-email-luojiaxing@huawei.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
- several refactoring patches of the core gpiolib code
- add support for NXP PCAL9554B/C to gpio-pca953x
- allow probing mockup devices from device tree
- refactoring and improvements to gpio-rcar
- improvements to locking in gpio-tegra
- code shrink in gpiolib devres
- get the irq offset from device tree in gpio-sifive
- major refactoring of gpio-exar
- convert gpio-mvebu pwm access to regmap
- create a new submenu for virtual GPIO drivers
- fix clang fall-through warnings treewide
- minor driver refactoring and tweaks sprinkled all over
-----BEGIN PGP SIGNATURE-----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=RmnM
-----END PGP SIGNATURE-----
Merge tag 'gpio-updates-for-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux into devel
gpio updates for v5.11-rc1
- several refactoring patches of the core gpiolib code
- add support for NXP PCAL9554B/C to gpio-pca953x
- allow probing mockup devices from device tree
- refactoring and improvements to gpio-rcar
- improvements to locking in gpio-tegra
- code shrink in gpiolib devres
- get the irq offset from device tree in gpio-sifive
- major refactoring of gpio-exar
- convert gpio-mvebu pwm access to regmap
- create a new submenu for virtual GPIO drivers
- fix clang fall-through warnings treewide
- minor driver refactoring and tweaks sprinkled all over
Since we already have a few virtual GPIO drivers, and more to come,
this category deserves its own submenu.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
This adds a driver that supports the GPIO block found in
MStar/SigmaStar ARMv7 SoCs.
The controller seems to have enough register for 128 lines
but where they are wired up differs between chips and
no currently known chip uses anywhere near 128 lines so there
needs to be some per-chip data to collect together what lines
actually have physical pins attached and map the right names to them.
The core peripherals seem to use the same lines on the
currently known chips but the lines used for the sensor
interface, lcd controller etc pins seem to be totally
different between the infinity and mercury chips
The code tries to collect all of the re-usable names,
offsets etc together so that it's easy to build the extra
per-chip data for other chips in the future.
So far this only supports the MSC313 and MSC313E chips.
Support for the SSC8336N (mercury5) is trivial to add once
all of the lines have been mapped out.
Signed-off-by: Daniel Palmer <daniel@0x0f.com>
Link: https://lore.kernel.org/r/20201129110803.2461700-4-daniel@0x0f.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
If users select sysfs support they get the character device
as well so that end-users cannot complain that they
"only have sysfs on my system". They should have the
character device at all times.
If someone is in so dire need of stripping out the
character device while still enabling the sysfs ABI they
can very well patch the kernel.
Also only show this obsolete option to expert users.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20201110142724.14760-1-linus.walleij@linaro.org
We can simplify the code in gpio-exar by using regmap. This allows us to
drop the mutex (regmap provides its own locking) and we can also reuse
regmap's bit operations instead of implementing our own update function.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
