gpmc_get_client_irq() last use was removed by
commit ac28e47ccc ("ARM: OMAP2+: Remove legacy gpmc-nand.c")
gpmc_ticks_to_ns() last use was removed by
commit 2514830b8b ("ARM: OMAP2+: Remove gpmc-onenand")
Remove them.
gpmc_clk_ticks_to_ns() is now only used in some DEBUG
code; move inside the ifdef to avoid unused warnings.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Acked-by: Kevin Hilman <khilman@baylibre.com>
Link: https://lore.kernel.org/r/20241211214227.107980-1-linux@treblig.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Export the aemif_set_cs_timing() and aemif_check_cs_timing() symbols so
they can be used by other drivers
Add a mutex to protect the CS configuration register from concurrent
accesses between the AEMIF and its 'children'.
Signed-off-by: Bastien Curutchet <bastien.curutchet@bootlin.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20241204094319.1050826-7-bastien.curutchet@bootlin.com
[krzysztof: wrap aemif_set_cs_timings() at 80-char]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Create an aemif_set_cs_timings() function to isolate the setting of a
chip select timing configuration and ease its exportation.
Signed-off-by: Bastien Curutchet <bastien.curutchet@bootlin.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20241204094319.1050826-6-bastien.curutchet@bootlin.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
aemif_calc_rate() checks the validity of a new computed timing against a
'max' value given as input. This isn't convenient if we want to check
the CS timing configuration somewhere else in the code.
Wrap the verification of all the chip select's timing configuration into a
single function to ease its exportation in upcoming patches.
Remove the validity check from aemif_calc_rate(). Also remove the no
longer used 'max' input and change the return type to u32.
Remove the check of the aemif_calc_rate()'s return value during
device-tree parsing as aemif_calc_rate() can't fail anymore.
Signed-off-by: Bastien Curutchet <bastien.curutchet@bootlin.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20241204094319.1050826-5-bastien.curutchet@bootlin.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
CS timings are store in the struct aemif_cs_data along with other CS
parameters. It isn't convenient for exposing CS timings to other drivers
without also exposing the other parameters.
Wrap the CS timings in a new struct aemif_cs_timings to simplify their
export in upcoming patches.
Signed-off-by: Bastien Curutchet <bastien.curutchet@bootlin.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20241204094319.1050826-4-bastien.curutchet@bootlin.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
CS timings are copied to local variables that are then used as is,
without any modifications.
Remove these unneeded local variables and deal directly with the timings
stored in the struct aemif_cs_data.
Signed-off-by: Bastien Curutchet <bastien.curutchet@bootlin.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20241204094319.1050826-3-bastien.curutchet@bootlin.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
The CS configuration register expects timings to be expressed in
'number of cycles - 1' but they are stored in ns in the struct
aemif_cs_data. So at init, the timings currently set are converted to ns
by aemif_get_hw_params(), updated with values from the device-tree
properties, and then converted back to 'number of cycles - 1' before
being applied.
Store the timings directly in 'number of cycles - 1' instead of
nanoseconds.
Perform the conversion from nanosecond during the device-tree parsing.
Remove aemif_cycles_to_nsec() as it isn't used anymore.
Signed-off-by: Bastien Curutchet <bastien.curutchet@bootlin.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20241204094319.1050826-2-bastien.curutchet@bootlin.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
The continual trickle of small conversion patches is grating on me, and
is really not helping. Just get rid of the 'remove_new' member
function, which is just an alias for the plain 'remove', and had a
comment to that effect:
/*
* .remove_new() is a relic from a prototype conversion of .remove().
* New drivers are supposed to implement .remove(). Once all drivers are
* converted to not use .remove_new any more, it will be dropped.
*/
This was just a tree-wide 'sed' script that replaced '.remove_new' with
'.remove', with some care taken to turn a subsequent tab into two tabs
to make things line up.
I did do some minimal manual whitespace adjustment for places that used
spaces to line things up.
Then I just removed the old (sic) .remove_new member function, and this
is the end result. No more unnecessary conversion noise.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Use scoped for_each_available_child_of_node_scoped() when iterating over
device nodes to make code a bit simpler.
Suggested-by: Jonathan Cameron <Jonathan.Cameron@Huawei.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20240825135001.48963-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Use devm_add_action_or_reset() and dev_err_probe() to make the probe()
error handling simpler around amba_release_regions() cleanup. This
allows to drop the remove() callback entirely.
Suggested-by: Jonathan Cameron <Jonathan.Cameron@Huawei.com>
Acked-by: Vladimir Zapolskiy <vz@mleia.com>
Reviewed-by: Vladimir Zapolskiy <vz@mleia.com>
Link: https://lore.kernel.org/r/20240825135001.48963-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
The RZ/{G2L,G2LC,V2L} SMARC EVK uses Micron MT25QU412A flash and RZ/G2UL
SMARC EVK uses Renesas AT25QL128A flash. With current pin setting for
IOVF pin, 4-bit flash write fails for AT25QL128A flash. Use Hi-Z state
as the default for IOVF pin, so that spi controller driver in linux will
be independent of flash type.
To support this, during board production, the bit 4 of the NV config
register must be cleared by the bootloader for Micron flash.
Output from u-boot after clearing bit4 of NVCR register.
=> renesas_micron_flash_nvcr
SF: Detected mt25qu512a with page size 256 Bytes, erase size 64 KiB, total 64 MiB
NVCR=0xef
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20240830203014.199326-2-biju.das.jz@bp.renesas.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Replace devm_clk_get() and clk_prepare_enable() with
devm_clk_get_enabled() in .probe().
Fix the bug of missing clk_disable_unprepare() in .remove() by
using devm_clk_get_enabled() that can disables and unprepares
it automatically on driver detach.
Fixes: 3c8f4ad85c ("memory/mediatek: add support for mt2701")
Cc: honghui.zhang@mediatek.com
Signed-off-by: Rong Qianfeng <rongqianfeng@vivo.com>
Reviewed-by: Yong Wu <yong.wu@mediatek.com>
Link: https://lore.kernel.org/r/20240821032558.43052-1-rongqianfeng@vivo.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Use devm_clk_get_enabled() to drop clock prepare/unprepare parts and
make code simpler.
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20240823-b4-cleanup-h-guard-v1-7-01668915bd55@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Use dev_err_probe() to avoid dmesg flood on actual defer. This makes
the code also simpler.
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20240823-b4-cleanup-h-guard-v1-6-01668915bd55@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Use devm_clk_get_enabled() to drop clock prepare/unprepare parts and
make code simpler. Change to dev_err_probe() in handling clk_get_rate()
error to make it even simpler.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Vladimir Zapolskiy <vz@mleia.com>
Link: https://lore.kernel.org/r/20240823-b4-cleanup-h-guard-v1-5-01668915bd55@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Use dev_err_probe() to avoid dmesg flood on actual defer. This makes
the code also simpler.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huwei.com>
Reviewed-by: Vladimir Zapolskiy <vz@mleia.com>
Link: https://lore.kernel.org/r/20240823-b4-cleanup-h-guard-v1-4-01668915bd55@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Simplify error handling (less gotos) over locks with guard().
The driver used file-scope variable 'irq_state' for storing IRQ state
with spin_lock_irqsave, so move it into respective local scopes. This
should be equivalent, but more readable (less global variables).
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huwei.com>
Link: https://lore.kernel.org/r/20240823-b4-cleanup-h-guard-v1-2-01668915bd55@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
This reverts commit 23a641d5c2.
The first-level children of the aemif node are not the device nodes (ones
containing the 'compatible' property) but the chip-select nodes which
instead have their own children.
of_platform_populate() will skip such nodes so we must indeed iterate
over the direct children of the aemif node. The problem here is that we
never call of_platform_depopulate() as it takes the root device as
argument. We only have an unpopulated chip-select nodes so we will leak
these devices if any of the calls to of_platform_populate() fails.
I don't have a batter idea right now but my patch was not correct so we
need to revert it. While at it: at least use the scoped variant of the
OF node iterator. Down the line, we should find a better solution to fix
this potential resource leak in error path.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20240824080235.56472-1-brgl@bgdev.pl
Fixes: 23a641d5c2 ("memory: ti-aemif: don't needlessly iterate over child nodes")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
dev_err_probe() combines 'return' and error code printing, thus code is
a bit simpler, even if it cannot actually defer.
Suggested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20240816-cleanup-h-of-node-put-memory-v2-6-9eed0ee16b78@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
When populating devices from a specific node, we don't need to call
of_platform_populate() for every child node manually - the routine
will already do it. We can call it directly from the platform device's
OF node. While at it: use the managed variant of of_platform_populate().
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20240809-ti-aemif-v1-3-27b1e5001390@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Remove several lines of code and a jump label by using the managed
variant of clk_get() that also prepares and enables the clock (and
disables and unprepares it on driver detach).
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20240809-ti-aemif-v1-2-27b1e5001390@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
There are no longer any users of the ti-aemif driver that set up platform
data from board files. We can shrink the driver by removing support for
it.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20240809-ti-aemif-v1-1-27b1e5001390@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Use of_property_read_bool() to read boolean properties rather than
of_find_property(). This is part of a larger effort to remove callers
of of_find_property() and similar functions. of_find_property() leaks
the DT struct property and data pointers which is a problem for
dynamically allocated nodes which may be freed.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20240731191312.1710417-21-robh@kernel.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Further streamline this function by moving the delay post-processing
to the callers, leaving it only with the task of returning the measured
delay values.
Signed-off-by: Diogo Ivo <diogo.ivo@tecnico.ulisboa.pt>
Link: https://lore.kernel.org/r/20240704-tegra210_emcfreq-v4-7-3e450503c555@tecnico.ulisboa.pt
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Separate the comparison/updating of the measured delay values with the
values currently programmed into a separate function to simplify the
code.
Signed-off-by: Diogo Ivo <diogo.ivo@tecnico.ulisboa.pt>
Link: https://lore.kernel.org/r/20240704-tegra210_emcfreq-v4-6-3e450503c555@tecnico.ulisboa.pt
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
As the current form of this function in a completely unrolled loop
over the RAM channels roll it up two levels to improve readability.
Signed-off-by: Diogo Ivo <diogo.ivo@tecnico.ulisboa.pt>
Link: https://lore.kernel.org/r/20240704-tegra210_emcfreq-v4-5-3e450503c555@tecnico.ulisboa.pt
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Convert the macros that manipulate the delay values to interpret their
index parameter as an integer to allow the introduction of loops.
Signed-off-by: Diogo Ivo <diogo.ivo@tecnico.ulisboa.pt>
Link: https://lore.kernel.org/r/20240704-tegra210_emcfreq-v4-4-3e450503c555@tecnico.ulisboa.pt
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Fix incorrect comment on periodic_compensation_handler() as the call
update_clock_tree_delay() with DVFS_UPDATE is responsible for dividing
the samples accumulated up to that point and comparing the computed
values with the currently programmed ones. While at it fix the
indentation of a nearby comment.
Signed-off-by: Diogo Ivo <diogo.ivo@tecnico.ulisboa.pt>
Link: https://lore.kernel.org/r/20240704-tegra210_emcfreq-v4-3-3e450503c555@tecnico.ulisboa.pt
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Move the calls that instruct the RAM to capture its clock tree delays
to update_clock_tree_delay() in order to avoid code duplication.
Signed-off-by: Diogo Ivo <diogo.ivo@tecnico.ulisboa.pt>
Link: https://lore.kernel.org/r/20240704-tegra210_emcfreq-v4-2-3e450503c555@tecnico.ulisboa.pt
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Prior to calling periodic_compensation_handler() the code is doing one
extra DRAM delay reading which is unnecessary as this is already done
in periodic_compensation_handler(), so remove these extra calls.
Signed-off-by: Diogo Ivo <diogo.ivo@tecnico.ulisboa.pt>
Link: https://lore.kernel.org/r/20240704-tegra210_emcfreq-v4-1-3e450503c555@tecnico.ulisboa.pt
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
While use of fsl_ifc driver with NAND flash is fine, as the fsl_ifc_nand
driver selects FSL_IFC automatically, we need the CONFIG_FSL_IFC option to
be selectable for platforms using fsl_ifc with NOR flash.
Fixes: ea0c0ad6b6 ("memory: Enable compile testing for most of the drivers")
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Esben Haabendal <esben@geanix.com>
Link: https://lore.kernel.org/r/20240530-fsl-ifc-config-v3-1-1fd2c3d233dd@geanix.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
- Updates to AMBA bus subsystem to drop .owner struct device_driver
initialisations, moving that to code instead.
- Add LPAE privileged-access-never support
- Add support for Clang CFI
- clkdev: report over-sized device or connection strings
-----BEGIN PGP SIGNATURE-----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=t/xl
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rmk/linux
Pull ARM updates from Russell King:
- Updates to AMBA bus subsystem to drop .owner struct device_driver
initialisations, moving that to code instead.
- Add LPAE privileged-access-never support
- Add support for Clang CFI
- clkdev: report over-sized device or connection strings
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rmk/linux: (36 commits)
ARM: 9398/1: Fix userspace enter on LPAE with CC_OPTIMIZE_FOR_SIZE=y
clkdev: report over-sized strings when creating clkdev entries
ARM: 9393/1: mm: Use conditionals for CFI branches
ARM: 9392/2: Support CLANG CFI
ARM: 9391/2: hw_breakpoint: Handle CFI breakpoints
ARM: 9390/2: lib: Annotate loop delay instructions for CFI
ARM: 9389/2: mm: Define prototypes for all per-processor calls
ARM: 9388/2: mm: Type-annotate all per-processor assembly routines
ARM: 9387/2: mm: Rewrite cacheflush vtables in CFI safe C
ARM: 9386/2: mm: Use symbol alias for cache functions
ARM: 9385/2: mm: Type-annotate all cache assembly routines
ARM: 9384/2: mm: Make tlbflush routines CFI safe
ARM: 9382/1: ftrace: Define ftrace_stub_graph
ARM: 9358/2: Implement PAN for LPAE by TTBR0 page table walks disablement
ARM: 9357/2: Reduce the number of #ifdef CONFIG_CPU_SW_DOMAIN_PAN
ARM: 9356/2: Move asm statements accessing TTBCR into C functions
ARM: 9355/2: Add TTBCR_* definitions to pgtable-3level-hwdef.h
ARM: 9379/1: coresight: tpda: drop owner assignment
ARM: 9378/1: coresight: etm4x: drop owner assignment
ARM: 9377/1: hwrng: nomadik: drop owner assignment
...
Amba bus core already sets owner, so driver does not need to.
Link: https://lore.kernel.org/r/20240326-module-owner-amba-v1-18-4517b091385b@linaro.org
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Add MODULE_DEVICE_TABLE(), so the module could be properly autoloaded
based on the alias from of_device_id table.
Reviewed-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240409204615.83928-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
