- Support for userspace to send requests directly to the on-chip GZIP
accelerator on Power9.
- Rework of our lockless page table walking (__find_linux_pte()) to make it
safe against parallel page table manipulations without relying on an IPI for
serialisation.
- A series of fixes & enhancements to make our machine check handling more
robust.
- Lots of plumbing to add support for "prefixed" (64-bit) instructions on
Power10.
- Support for using huge pages for the linear mapping on 8xx (32-bit).
- Remove obsolete Xilinx PPC405/PPC440 support, and an associated sound driver.
- Removal of some obsolete 40x platforms and associated cruft.
- Initial support for booting on Power10.
- Lots of other small features, cleanups & fixes.
Thanks to:
Alexey Kardashevskiy, Alistair Popple, Andrew Donnellan, Andrey Abramov,
Aneesh Kumar K.V, Balamuruhan S, Bharata B Rao, Bulent Abali, Cédric Le
Goater, Chen Zhou, Christian Zigotzky, Christophe JAILLET, Christophe Leroy,
Dmitry Torokhov, Emmanuel Nicolet, Erhard F., Gautham R. Shenoy, Geoff Levand,
George Spelvin, Greg Kurz, Gustavo A. R. Silva, Gustavo Walbon, Haren Myneni,
Hari Bathini, Joel Stanley, Jordan Niethe, Kajol Jain, Kees Cook, Leonardo
Bras, Madhavan Srinivasan., Mahesh Salgaonkar, Markus Elfring, Michael
Neuling, Michal Simek, Nathan Chancellor, Nathan Lynch, Naveen N. Rao,
Nicholas Piggin, Oliver O'Halloran, Paul Mackerras, Pingfan Liu, Qian Cai, Ram
Pai, Raphael Moreira Zinsly, Ravi Bangoria, Sam Bobroff, Sandipan Das, Segher
Boessenkool, Stephen Rothwell, Sukadev Bhattiprolu, Tyrel Datwyler, Wolfram
Sang, Xiongfeng Wang.
-----BEGIN PGP SIGNATURE-----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=o0WU
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
- Support for userspace to send requests directly to the on-chip GZIP
accelerator on Power9.
- Rework of our lockless page table walking (__find_linux_pte()) to
make it safe against parallel page table manipulations without
relying on an IPI for serialisation.
- A series of fixes & enhancements to make our machine check handling
more robust.
- Lots of plumbing to add support for "prefixed" (64-bit) instructions
on Power10.
- Support for using huge pages for the linear mapping on 8xx (32-bit).
- Remove obsolete Xilinx PPC405/PPC440 support, and an associated sound
driver.
- Removal of some obsolete 40x platforms and associated cruft.
- Initial support for booting on Power10.
- Lots of other small features, cleanups & fixes.
Thanks to: Alexey Kardashevskiy, Alistair Popple, Andrew Donnellan,
Andrey Abramov, Aneesh Kumar K.V, Balamuruhan S, Bharata B Rao, Bulent
Abali, Cédric Le Goater, Chen Zhou, Christian Zigotzky, Christophe
JAILLET, Christophe Leroy, Dmitry Torokhov, Emmanuel Nicolet, Erhard F.,
Gautham R. Shenoy, Geoff Levand, George Spelvin, Greg Kurz, Gustavo A.
R. Silva, Gustavo Walbon, Haren Myneni, Hari Bathini, Joel Stanley,
Jordan Niethe, Kajol Jain, Kees Cook, Leonardo Bras, Madhavan
Srinivasan., Mahesh Salgaonkar, Markus Elfring, Michael Neuling, Michal
Simek, Nathan Chancellor, Nathan Lynch, Naveen N. Rao, Nicholas Piggin,
Oliver O'Halloran, Paul Mackerras, Pingfan Liu, Qian Cai, Ram Pai,
Raphael Moreira Zinsly, Ravi Bangoria, Sam Bobroff, Sandipan Das, Segher
Boessenkool, Stephen Rothwell, Sukadev Bhattiprolu, Tyrel Datwyler,
Wolfram Sang, Xiongfeng Wang.
* tag 'powerpc-5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (299 commits)
powerpc/pseries: Make vio and ibmebus initcalls pseries specific
cxl: Remove dead Kconfig options
powerpc: Add POWER10 architected mode
powerpc/dt_cpu_ftrs: Add MMA feature
powerpc/dt_cpu_ftrs: Enable Prefixed Instructions
powerpc/dt_cpu_ftrs: Advertise support for ISA v3.1 if selected
powerpc: Add support for ISA v3.1
powerpc: Add new HWCAP bits
powerpc/64s: Don't set FSCR bits in INIT_THREAD
powerpc/64s: Save FSCR to init_task.thread.fscr after feature init
powerpc/64s: Don't let DT CPU features set FSCR_DSCR
powerpc/64s: Don't init FSCR_DSCR in __init_FSCR()
powerpc/32s: Fix another build failure with CONFIG_PPC_KUAP_DEBUG
powerpc/module_64: Use special stub for _mcount() with -mprofile-kernel
powerpc/module_64: Simplify check for -mprofile-kernel ftrace relocations
powerpc/module_64: Consolidate ftrace code
powerpc/32: Disable KASAN with pages bigger than 16k
powerpc/uaccess: Don't set KUEP by default on book3s/32
powerpc/uaccess: Don't set KUAP by default on book3s/32
powerpc/8xx: Reduce time spent in allow_user_access() and friends
...
To enable/disable kernel access to user space, the 8xx has to
modify the properties of access group 1. This is done by writing
predefined values into SPRN_Mx_AP registers.
As of today, a __put_user() gives:
00000d64 <my_test>:
d64: 3d 20 4f ff lis r9,20479
d68: 61 29 ff ff ori r9,r9,65535
d6c: 7d 3a c3 a6 mtspr 794,r9
d70: 39 20 00 00 li r9,0
d74: 90 83 00 00 stw r4,0(r3)
d78: 3d 20 6f ff lis r9,28671
d7c: 61 29 ff ff ori r9,r9,65535
d80: 7d 3a c3 a6 mtspr 794,r9
d84: 4e 80 00 20 blr
Because only groups 0 and 1 are used, the definition of
groups 2 to 15 doesn't matter.
By setting unused bits to 0 instead on 1, one instruction is
removed for each lock and unlock action:
00000d5c <my_test>:
d5c: 3d 20 40 00 lis r9,16384
d60: 7d 3a c3 a6 mtspr 794,r9
d64: 39 20 00 00 li r9,0
d68: 90 83 00 00 stw r4,0(r3)
d6c: 3d 20 60 00 lis r9,24576
d70: 7d 3a c3 a6 mtspr 794,r9
d74: 4e 80 00 20 blr
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/57425c33dd72f292b1a23570244b81419072a7aa.1586945153.git.christophe.leroy@c-s.fr
Commit 1bc54c03117b ("powerpc: rework 4xx PTE access and TLB miss")
reworked 44x PTE access to avoid atomic pte updates, and
left 8xx, 40x and fsl booke with atomic pte updates.
Commit 6cfd8990e27d ("powerpc: rework FSL Book-E PTE access and TLB
miss") removed atomic pte updates on fsl booke.
It went away on 8xx with commit ddfc20a3b9ae ("powerpc/8xx: Remove
PTE_ATOMIC_UPDATES").
40x is the last platform setting PTE_ATOMIC_UPDATES.
Rework PTE access and TLB miss to remove PTE_ATOMIC_UPDATES for 40x:
- Always handle DSI as a fault.
- Bail out of TLB miss handler when CONFIG_SWAP is set and
_PAGE_ACCESSED is not set.
- Bail out of ITLB miss handler when _PAGE_EXEC is not set.
- Only set WR bit when both _PAGE_RW and _PAGE_DIRTY are set.
- Remove _PAGE_HWWRITE
- Don't require PTE_ATOMIC_UPDATES anymore
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/99a0fcd337ef67088140d1647d75fea026a70413.1590079968.git.christophe.leroy@csgroup.eu
Add a function to early map kernel memory using huge pages.
For 512k pages, just use standard page table and map in using 512k
pages.
For 8M pages, create a hugepd table and populate the two PGD
entries with it.
This function can only be used to create page tables at startup. Once
the regular SLAB allocation functions replace memblock functions,
this function cannot allocate new pages anymore. However it can still
update existing mappings with new protections.
hugepd_none() macro is moved into asm/hugetlb.h to be usable outside
of mm/hugetlbpage.c
early_pte_alloc_kernel() is made visible.
_PAGE_HUGE flag is now displayed by ptdump.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
[mpe: Change ptdump display to use "huge"]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/68325bcd3b6f93127f7810418a2352c3519066d6.1589866984.git.christophe.leroy@csgroup.eu
Pinned TLBs cannot be modified when the MMU is enabled.
Create a function to rewrite the pinned TLB entries with MMU off.
To set pinned TLB, we have to turn off MMU, disable pinning,
do a TLB flush (Either with tlbie and tlbia) then reprogam
the TLB entries, enable pinning and turn on MMU.
If using tlbie, it cleared entries in both instruction and data
TLB regardless whether pinning is disabled or not.
If using tlbia, it clears all entries of the TLB which has
disabled pinning.
To make it easy, just clear all entries in both TLBs, and
reprogram them.
The function takes two arguments, the top of the memory to
consider and whether data is RO under _sinittext.
When DEBUG_PAGEALLOC is set, the top is the end of kernel rodata.
Otherwise, that's the top of physical RAM.
Everything below _sinittext is set RX, over _sinittext that's RW.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/c17806014bb1c06513ad1e1d510faea31984b177.1589866984.git.christophe.leroy@csgroup.eu
At the time being, 512k huge pages are handled through hugepd page
tables. The PMD entry is flagged as a hugepd pointer and it
means that only 512k hugepages can be managed in that 4M block.
However, the hugepd table has the same size as a normal page
table, and 512k entries can therefore be nested with normal pages.
On the 8xx, TLB loading is performed by software and allthough the
page tables are organised to match the L1 and L2 level defined by
the HW, all TLB entries have both L1 and L2 independent entries.
It means that even if two TLB entries are associated with the same
PMD entry, they can be loaded with different values in L1 part.
The L1 entry contains the page size (PS field):
- 00 for 4k and 16 pages
- 01 for 512k pages
- 11 for 8M pages
By adding a flag for hugepages in the PTE (_PAGE_HUGE) and copying it
into the lower bit of PS, we can then manage 512k pages with normal
page tables:
- PMD entry has PS=11 for 8M pages
- PMD entry has PS=00 for other pages.
As a PMD entry covers 4M areas, a PMD will either point to a hugepd
table having a single entry to an 8M page, or the PMD will point to
a standard page table which will have either entries to 4k or 16k or
512k pages. For 512k pages, as the L1 entry will not know it is a
512k page before the PTE is read, there will be 128 entries in the
PTE as if it was 4k pages. But when loading the TLB, it will be
flagged as a 512k page.
Note that we can't use pmd_ptr() in asm/nohash/32/pgtable.h because
it is not defined yet.
In ITLB miss, we keep the possibility to opt it out as when kernel
text is pinned and no user hugepages are used, we can save several
instruction by not using r11.
In DTLB miss, that's just one instruction so it's not worth bothering
with it.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/002819e8e166bf81d24b24782d98de7c40905d8f.1589866984.git.christophe.leroy@csgroup.eu
Prepare ITLB handler to handle _PAGE_HUGE when CONFIG_HUGETLBFS
is enabled. This means that the L1 entry has to be kept in r11
until L2 entry is read, in order to insert _PAGE_HUGE into it.
Also move pgd_offset helpers before pte_update() as they
will be needed there in next patch.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/21fd1de8fba781bededa9474a5a9374aefb1f849.1589866984.git.christophe.leroy@csgroup.eu
CONFIG_8xx_COPYBACK was there to help disabling copyback cache mode
for debuging hardware. But nobody will design new boards with 8xx now.
All 8xx platforms select it, so make it the default and remove
the option.
Also remove the Mx_RESETVAL values which are pretty useless and hide
the real value while reading code.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/bcc968cda075516eb76e2f25e09821f582c566b4.1589866984.git.christophe.leroy@csgroup.eu
Commit 55c8fc3f4930 ("powerpc/8xx: reintroduce 16K pages with HW
assistance") redefined pte_t as a struct of 4 pte_basic_t, because
in 16K pages mode there are four identical entries in the page table.
But hugepd entries for 8M pages require only one entry of size
pte_basic_t. So there is no point in creating a cache for 4 entries
page tables.
Calculate PTE_T_ORDER using the size of pte_basic_t instead of pte_t.
Define specific huge_pte helpers (set_huge_pte_at(), huge_pte_clear(),
huge_ptep_set_wrprotect()) to write the pte in a single entry instead
of using set_pte_at() which writes 4 identical entries in 16k pages
mode. Also make sure that __ptep_set_access_flags() properly handle
the huge_pte case.
Define set_pte_filter() inline otherwise GCC doesn't inline it anymore
because it is now used twice, and that gives a pretty suboptimal code
because of pte_t being a struct of 4 entries.
Those functions are also used for 512k pages which only require one
entry as well allthough replicating it four times was harmless as 512k
pages entries are spread every 128 bytes in the table.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/43050d1a0c2d6e1541cab9c1126fc80bc7015ebd.1589866984.git.christophe.leroy@csgroup.eu
pte_update() is a bit special for the 8xx. At the time
being, that's an #ifdef inside the nohash/32 pte_update().
As we are going to make it even more special in the coming
patches, create a dedicated version for pte_update() for 8xx.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/a103be0099ac2360f8c44f4a1a63cc03713a1360.1589866984.git.christophe.leroy@csgroup.eu
PPC64 takes 3 additional parameters compared to PPC32:
- mm
- address
- huge
These 3 parameters will be needed in order to perform different
action depending on the page size on the 8xx.
Make pte_update() prototype identical for PPC32 and PPC64.
This allows dropping an #ifdef in huge_ptep_get_and_clear().
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/38111acf6841047a8addde37c63e92d611ee38c2.1589866984.git.christophe.leroy@csgroup.eu
On PPC32, __ptep_test_and_clear_young() takes the mm->context.id
In preparation of standardising pte_update() params between PPC32 and
PPC64, __ptep_test_and_clear_young() need mm instead of mm->context.id
Replace context param by mm.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/0a65470e50a14373b7c2291184514aa982462255.1589866984.git.christophe.leroy@csgroup.eu
When CONFIG_PTE_64BIT is set, pte_update() operates on
'unsigned long long'
When CONFIG_PTE_64BIT is not set, pte_update() operates on
'unsigned long'
In asm/page.h, we have pte_basic_t which is 'unsigned long long'
when CONFIG_PTE_64BIT is set and 'unsigned long' otherwise.
Refactor pte_update() using pte_basic_t.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/590d67994a2847cd9fe088f7d974499e3a18b6ac.1589866984.git.christophe.leroy@csgroup.eu
Only 40x still uses PTE_ATOMIC_UPDATES.
40x cannot not select CONFIG_PTE64_BIT.
Drop handling of PTE_ATOMIC_UPDATES:
- In nohash/64
- In nohash/32 for CONFIG_PTE_64BIT
Keep PTE_ATOMIC_UPDATES only for nohash/32 for !CONFIG_PTE_64BIT
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/d6f8e1f46583f1842de24581a68b0496feb15516.1589866984.git.christophe.leroy@csgroup.eu
On PPC32, pte_offset_map() does a kmap_atomic() in order to support
page tables allocated in high memory, just like ARM and x86/32.
But since at least 2008 and commit 8054a3428fbe ("powerpc: Remove dead
CONFIG_HIGHPTE"), page tables are never allocated in high memory.
When the page is in low mem, kmap_atomic() just returns the page
address but still disable preemption and pagefault. And it is
not an inlined function, so we suffer function call for no reason.
Make pte_offset_map() the same as pte_offset_kernel() and make
pte_unmap() void, in the same way as PPC64 which doesn't have HIGHMEM.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/03c97f0f6b3790d164822563be80f2fd4713a955.1581932480.git.christophe.leroy@c-s.fr
- Implement user_access_begin() and friends for our platforms that support
controlling kernel access to userspace.
- Enable CONFIG_VMAP_STACK on 32-bit Book3S and 8xx.
- Some tweaks to our pseries IOMMU code to allow SVMs ("secure" virtual
machines) to use the IOMMU.
- Add support for CLOCK_{REALTIME/MONOTONIC}_COARSE to the 32-bit VDSO, and
some other improvements.
- A series to use the PCI hotplug framework to control opencapi card's so that
they can be reset and re-read after flashing a new FPGA image.
As well as other minor fixes and improvements as usual.
Thanks to:
Alastair D'Silva, Alexandre Ghiti, Alexey Kardashevskiy, Andrew Donnellan,
Aneesh Kumar K.V, Anju T Sudhakar, Bai Yingjie, Chen Zhou, Christophe Leroy,
Frederic Barrat, Greg Kurz, Jason A. Donenfeld, Joel Stanley, Jordan Niethe,
Julia Lawall, Krzysztof Kozlowski, Laurent Dufour, Laurentiu Tudor, Linus
Walleij, Michael Bringmann, Nathan Chancellor, Nicholas Piggin, Nick
Desaulniers, Oliver O'Halloran, Peter Ujfalusi, Pingfan Liu, Ram Pai, Randy
Dunlap, Russell Currey, Sam Bobroff, Sebastian Andrzej Siewior, Shawn
Anastasio, Stephen Rothwell, Steve Best, Sukadev Bhattiprolu, Thiago Jung
Bauermann, Tyrel Datwyler, Vaibhav Jain.
-----BEGIN PGP SIGNATURE-----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=xpG+
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
"A pretty small batch for us, and apologies for it being a bit late, I
wanted to sneak Christophe's user_access_begin() series in.
Summary:
- Implement user_access_begin() and friends for our platforms that
support controlling kernel access to userspace.
- Enable CONFIG_VMAP_STACK on 32-bit Book3S and 8xx.
- Some tweaks to our pseries IOMMU code to allow SVMs ("secure"
virtual machines) to use the IOMMU.
- Add support for CLOCK_{REALTIME/MONOTONIC}_COARSE to the 32-bit
VDSO, and some other improvements.
- A series to use the PCI hotplug framework to control opencapi
card's so that they can be reset and re-read after flashing a new
FPGA image.
As well as other minor fixes and improvements as usual.
Thanks to: Alastair D'Silva, Alexandre Ghiti, Alexey Kardashevskiy,
Andrew Donnellan, Aneesh Kumar K.V, Anju T Sudhakar, Bai Yingjie, Chen
Zhou, Christophe Leroy, Frederic Barrat, Greg Kurz, Jason A.
Donenfeld, Joel Stanley, Jordan Niethe, Julia Lawall, Krzysztof
Kozlowski, Laurent Dufour, Laurentiu Tudor, Linus Walleij, Michael
Bringmann, Nathan Chancellor, Nicholas Piggin, Nick Desaulniers,
Oliver O'Halloran, Peter Ujfalusi, Pingfan Liu, Ram Pai, Randy Dunlap,
Russell Currey, Sam Bobroff, Sebastian Andrzej Siewior, Shawn
Anastasio, Stephen Rothwell, Steve Best, Sukadev Bhattiprolu, Thiago
Jung Bauermann, Tyrel Datwyler, Vaibhav Jain"
* tag 'powerpc-5.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (131 commits)
powerpc: configs: Cleanup old Kconfig options
powerpc/configs/skiroot: Enable some more hardening options
powerpc/configs/skiroot: Disable xmon default & enable reboot on panic
powerpc/configs/skiroot: Enable security features
powerpc/configs/skiroot: Update for symbol movement only
powerpc/configs/skiroot: Drop default n CONFIG_CRYPTO_ECHAINIV
powerpc/configs/skiroot: Drop HID_LOGITECH
powerpc/configs: Drop NET_VENDOR_HP which moved to staging
powerpc/configs: NET_CADENCE became NET_VENDOR_CADENCE
powerpc/configs: Drop CONFIG_QLGE which moved to staging
powerpc: Do not consider weak unresolved symbol relocations as bad
powerpc/32s: Fix kasan_early_hash_table() for CONFIG_VMAP_STACK
powerpc: indent to improve Kconfig readability
powerpc: Provide initial documentation for PAPR hcalls
powerpc: Implement user_access_save() and user_access_restore()
powerpc: Implement user_access_begin and friends
powerpc/32s: Prepare prevent_user_access() for user_access_end()
powerpc/32s: Drop NULL addr verification
powerpc/kuap: Fix set direction in allow/prevent_user_access()
powerpc/32s: Fix bad_kuap_fault()
...
Patch series "Fixup page directory freeing", v4.
This is a repost of patch series from Peter with the arch specific changes
except ppc64 dropped. ppc64 changes are added here because we are redoing
the patch series on top of ppc64 changes. This makes it easy to backport
these changes. Only the first 2 patches need to be backported to stable.
The thing is, on anything SMP, freeing page directories should observe the
exact same order as normal page freeing:
1) unhook page/directory
2) TLB invalidate
3) free page/directory
Without this, any concurrent page-table walk could end up with a
Use-after-Free. This is esp. trivial for anything that has software
page-table walkers (HAVE_FAST_GUP / software TLB fill) or the hardware
caches partial page-walks (ie. caches page directories).
Even on UP this might give issues since mmu_gather is preemptible these
days. An interrupt or preempted task accessing user pages might stumble
into the free page if the hardware caches page directories.
This patch series fixes ppc64 and add generic MMU_GATHER changes to
support the conversion of other architectures. I haven't added patches
w.r.t other architecture because they are yet to be acked.
This patch (of 9):
A followup patch is going to make sure we correctly invalidate page walk
cache before we free page table pages. In order to keep things simple
enable RCU_TABLE_FREE even for !SMP so that we don't have to fixup the
!SMP case differently in the followup patch
!SMP case is right now broken for radix translation w.r.t page walk
cache flush. We can get interrupted in between page table free and
that would imply we have page walk cache entries pointing to tables
which got freed already. Michael said "both our platforms that run on
Power9 force SMP on in Kconfig, so the !SMP case is unlikely to be a
problem for anyone in practice, unless they've hacked their kernel to
build it !SMP."
Link: http://lkml.kernel.org/r/20200116064531.483522-2-aneesh.kumar@linux.ibm.com
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Implement user_access_save() and user_access_restore()
On 8xx and radix:
- On save, get the value of the associated special register then
prevent user access.
- On restore, set back the saved value to the associated special
register.
On book3s/32:
- On save, get the value stored in current->thread.kuap and prevent
user access.
- On restore, regenerate address range from the stored value and
reopen read/write access for that range.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/54f2f74938006b33c55a416674807b42ef222068.1579866752.git.christophe.leroy@c-s.fr
At the moment, bad_kuap_fault() reports a fault only if a bad access
to userspace occurred while access to userspace was not granted.
But if a fault occurs for a write outside the allowed userspace
segment(s) that have been unlocked, bad_kuap_fault() fails to
detect it and the kernel loops forever in do_page_fault().
Fix it by checking that the accessed address is within the allowed
range.
Fixes: a68c31fc01ef ("powerpc/32s: Implement Kernel Userspace Access Protection")
Cc: stable@vger.kernel.org # v5.2+
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/f48244e9485ada0a304ed33ccbb8da271180c80d.1579866752.git.christophe.leroy@c-s.fr
Add support of KASAN_VMALLOC on PPC32.
To allow this, the early shadow covering the VMALLOC space
need to be removed once high_memory var is set and before
freeing memblock.
And the VMALLOC area need to be aligned such that boundaries
are covered by a full shadow page.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/031dec5487bde9b2181c8b3c9800e1879cf98c1a.1579024426.git.christophe.leroy@c-s.fr
Most 8xx registers have specific names, so just include
reg_8xx.h all the time in reg.h in order to have them defined
even when CONFIG_PPC_8xx is not selected. This will avoid
the need for #ifdefs in C code.
Guard SPRN_ICTRL in an #ifdef CONFIG_PPC_8xx as this register
has same name but different meaning and different spr number as
another register in the mpc7450.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/dd82934ad91aab607d0eb7e626c14e6ac0d654eb.1567068137.git.christophe.leroy@c-s.fr
This patch add support to boot kernel from places other than KERNELBASE.
Since CONFIG_RELOCATABLE has already supported, what we need to do is
map or copy kernel to a proper place and relocate. Freescale Book-E
parts expect lowmem to be mapped by fixed TLB entries(TLB1). The TLB1
entries are not suitable to map the kernel directly in a randomized
region, so we chose to copy the kernel to a proper place and restart to
relocate.
The offset of the kernel was not randomized yet(a fixed 64M is set). We
will randomize it in the next patch.
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Tested-by: Diana Craciun <diana.craciun@nxp.com>
Reviewed-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Scott Wood <oss@buserror.net>
[mpe: Use PTRRELOC() in early_init()]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
M_IF_NEEDED is defined too many times. Move it to a common place and
rename it to MAS2_M_IF_NEEDED which is much readable.
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Reviewed-by: Christophe Leroy <christophe.leroy@c-s.fr>
Reviewed-by: Diana Craciun <diana.craciun@nxp.com>
Tested-by: Diana Craciun <diana.craciun@nxp.com>
Signed-off-by: Scott Wood <oss@buserror.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This switches to using common code for the DMA allocations, including
potential use of the CMA allocator if configured.
Switching to the generic code enables DMA allocations from atomic
context, which is required by the DMA API documentation, and also
adds various other minor features drivers start relying upon. It
also makes sure we have on tested code base for all architectures
that require uncached pte bits for coherent DMA allocations.
Another advantage is that consistent memory allocations now share
the general vmalloc pool instead of needing an explicit careout
from it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Christophe Leroy <christophe.leroy@c-s.fr> # tested on 8xx
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190814132230.31874-2-hch@lst.de
PPC32 and PPC64 are doing the same once SLAB is available.
Create a do_ioremap() function that calls get_vm_area and
do the mapping.
For PPC64, we add the 4K PFN hack sanity check to __ioremap_caller()
in order to avoid using __ioremap_at(). Other checks in __ioremap_at()
are irrelevant for __ioremap_caller().
On PPC64, VM area is allocated in the range [ioremap_bot ; IOREMAP_END]
On PPC32, VM area is allocated in the range [VMALLOC_START ; VMALLOC_END]
Lets define IOREMAP_START is ioremap_bot for PPC64, and alias
IOREMAP_START/END to VMALLOC_START/END on PPC32
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/42e7e36ad32e0fdf76692426cc642799c9f689b8.1566309263.git.christophe.leroy@c-s.fr
Drop multiple definitions of ioremap_bot and make one common to
all subarches.
Only CONFIG_PPC_BOOK3E_64 had a global static init value for
ioremap_bot. Now ioremap_bot is set in early_init_mmu_global().
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/920eebfd9f36f14c79d1755847f5bf7c83703bdd.1566309262.git.christophe.leroy@c-s.fr
Only BOOK3S and FSL_BOOK3E have a usefull update_mmu_cache().
For the others, just define it static inline.
In the meantime, simplify the FSL_BOOK3E related ifdef as
book3e_hugetlb_preload() only exists when CONFIG_PPC_FSL_BOOK3E
is selected.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/668aba4db6b9af6d8a151174e11a4289f1a6bbcd.1565933217.git.christophe.leroy@c-s.fr
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-or-later
has been chosen to replace the boilerplate/reference in 3029 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When we add KASAN shadow area, KVIRT_TOP can't be anymore fixed
at 0xfe000000.
This patch uses FIXADDR_START to define KVIRT_TOP.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
pgd_alloc() and pgd_free() are identical on nohash 32 and 64.
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
pmd_pgtable() is identical on the 4 subarches, refactor it.
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
pgtable_free() and others are identical on nohash/32 and 64,
so move them into asm/nohash/pgalloc.h
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Use IS_ENABLED(CONFIG_BOOKE) to make single versions of
pmd_populate() and pmd_populate_kernel()
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
pgtable_cache[] is the same for the 4 subarches, lets make it common.
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Functions pte_alloc_one(), pte_alloc_one_kernel(), pte_free(),
pte_free_kernel() are identical for the four subarches.
This patch moves their definition in a common place.
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
pte_alloc_one_kernel() and pte_alloc_one() are simple calls to
pte_fragment_alloc(), so they are good candidates for inlining as
already done on PPC64.
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Those files have no real added values, especially the 64 bit
which only includes the common book3e mmu.h which is also
included from 32 bits side.
So lets do the final inclusion directly from nohash/mmu.h
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
pgtable_t is now identical for all subarches, move it to the
top level asm/mmu.h
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Book3E 64 is the only subarch not using pte_fragment. In order
to allow refactorisation, this patch converts it to pte_fragment.
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This has never been called (since Kernel has been in git at least),
drop it.
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
