Kernel/linux-next
1
0
Fork 0
mirror of https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git synced 2025-01-17 13:58:46 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
697,906 Commits 7 Branches 923 Tags
Commit Graph

94808 Commits

Author SHA1 Message Date
Mike Rapoport
8d10396342 userfaultfd: shmem: add shmem_mfill_zeropage_pte for userfaultfd support 
shmem_mfill_zeropage_pte is the low level routine that implements the
userfaultfd UFFDIO_ZEROPAGE command.  Since for shmem mappings zero
pages are always allocated and accounted, the new method is a slight
extension of the existing shmem_mcopy_atomic_pte.

Link: http://lkml.kernel.org/r/1497939652-16528-4-git-send-email-rppt@linux.vnet.ibm.com
Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Hillf Danton <hillf.zj@alibaba-inc.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Pavel Emelyanov <xemul@virtuozzo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2017-09-06 17:27:28 -07:00
Huang Ying
fe490cc0fe mm, THP, swap: add THP swapping out fallback counting 
When swapping out THP (Transparent Huge Page), instead of swapping out
the THP as a whole, sometimes we have to fallback to split the THP into
normal pages before swapping, because no free swap clusters are
available, or cgroup limit is exceeded, etc.  To count the number of the
fallback, a new VM event THP_SWPOUT_FALLBACK is added, and counted when
we fallback to split the THP.

Link: http://lkml.kernel.org/r/20170724051840.2309-13-ying.huang@intel.com
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Shaohua Li <shli@kernel.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Ross Zwisler <ross.zwisler@intel.com> [for brd.c, zram_drv.c, pmem.c]
Cc: Vishal L Verma <vishal.l.verma@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2017-09-06 17:27:28 -07:00
Huang Ying
59807685a7 mm, THP, swap: support splitting THP for THP swap out 
After adding swapping out support for THP (Transparent Huge Page), it is
possible that a THP in swap cache (partly swapped out) need to be split.
To split such a THP, the swap cluster backing the THP need to be split
too, that is, the CLUSTER_FLAG_HUGE flag need to be cleared for the swap
cluster.  The patch implemented this.

And because the THP swap writing needs the THP keeps as huge page during
writing.  The PageWriteback flag is checked before splitting.

Link: http://lkml.kernel.org/r/20170724051840.2309-8-ying.huang@intel.com
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Shaohua Li <shli@kernel.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Ross Zwisler <ross.zwisler@intel.com> [for brd.c, zram_drv.c, pmem.c]
Cc: Vishal L Verma <vishal.l.verma@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2017-09-06 17:27:28 -07:00
Huang Ying
225311a464 mm: test code to write THP to swap device as a whole 
To support delay splitting THP (Transparent Huge Page) after swapped
out, we need to enhance swap writing code to support to write a THP as a
whole.  This will improve swap write IO performance.

As Ming Lei <ming.lei@redhat.com> pointed out, this should be based on
multipage bvec support, which hasn't been merged yet.  So this patch is
only for testing the functionality of the other patches in the series.
And will be reimplemented after multipage bvec support is merged.

Link: http://lkml.kernel.org/r/20170724051840.2309-7-ying.huang@intel.com
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Ross Zwisler <ross.zwisler@intel.com> [for brd.c, zram_drv.c, pmem.c]
Cc: Shaohua Li <shli@kernel.org>
Cc: Vishal L Verma <vishal.l.verma@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2017-09-06 17:27:28 -07:00
Huang Ying
ba3c4ce6de mm, THP, swap: make reuse_swap_page() works for THP swapped out 
After supporting to delay THP (Transparent Huge Page) splitting after
swapped out, it is possible that some page table mappings of the THP are
turned into swap entries.  So reuse_swap_page() need to check the swap
count in addition to the map count as before.  This patch done that.

In the huge PMD write protect fault handler, in addition to the page map
count, the swap count need to be checked too, so the page lock need to
be acquired too when calling reuse_swap_page() in addition to the page
table lock.

[ying.huang@intel.com: silence a compiler warning]
  Link: http://lkml.kernel.org/r/87bmnzizjy.fsf@yhuang-dev.intel.com
Link: http://lkml.kernel.org/r/20170724051840.2309-4-ying.huang@intel.com
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Shaohua Li <shli@kernel.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Ross Zwisler <ross.zwisler@intel.com> [for brd.c, zram_drv.c, pmem.c]
Cc: Vishal L Verma <vishal.l.verma@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2017-09-06 17:27:27 -07:00
Huang Ying
e07098294a mm, THP, swap: support to reclaim swap space for THP swapped out 
The normal swap slot reclaiming can be done when the swap count reaches
SWAP_HAS_CACHE.  But for the swap slot which is backing a THP, all swap
slots backing one THP must be reclaimed together, because the swap slot
may be used again when the THP is swapped out again later.  So the swap
slots backing one THP can be reclaimed together when the swap count for
all swap slots for the THP reached SWAP_HAS_CACHE.  In the patch, the
functions to check whether the swap count for all swap slots backing one
THP reached SWAP_HAS_CACHE are implemented and used when checking
whether a swap slot can be reclaimed.

To make it easier to determine whether a swap slot is backing a THP, a
new swap cluster flag named CLUSTER_FLAG_HUGE is added to mark a swap
cluster which is backing a THP (Transparent Huge Page).  Because THP
swap in as a whole isn't supported now.  After deleting the THP from the
swap cache (for example, swapping out finished), the CLUSTER_FLAG_HUGE
flag will be cleared.  So that, the normal pages inside THP can be
swapped in individually.

[ying.huang@intel.com: fix swap_page_trans_huge_swapped on HDD]
  Link: http://lkml.kernel.org/r/874ltsm0bi.fsf@yhuang-dev.intel.com
Link: http://lkml.kernel.org/r/20170724051840.2309-3-ying.huang@intel.com
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Acked-by: Rik van Riel <riel@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Shaohua Li <shli@kernel.org>
Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Ross Zwisler <ross.zwisler@intel.com> [for brd.c, zram_drv.c, pmem.c]
Cc: Vishal L Verma <vishal.l.verma@intel.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2017-09-06 17:27:27 -07:00
Matthias Kaehlcke
04fecbf51b mm: memcontrol: use int for event/state parameter in several functions 
Several functions use an enum type as parameter for an event/state, but
are called in some locations with an argument of a different enum type.
Adjust the interface of these functions to reality by changing the
parameter to int.

This fixes a ton of enum-conversion warnings that are generated when
building the kernel with clang.

[mka@chromium.org: also change parameter type of inc/dec/mod_memcg_page_state()]
  Link: http://lkml.kernel.org/r/20170728213442.93823-1-mka@chromium.org
Link: http://lkml.kernel.org/r/20170727211004.34435-1-mka@chromium.org
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Doug Anderson <dianders@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2017-09-06 17:27:27 -07:00
Jan Kara
397162ffa2 mm: remove nr_pages argument from pagevec_lookup{,_range}() 
All users of pagevec_lookup() and pagevec_lookup_range() now pass
PAGEVEC_SIZE as a desired number of pages.

Just drop the argument.

Link: http://lkml.kernel.org/r/20170726114704.7626-11-jack@suse.cz
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2017-09-06 17:27:27 -07:00
Jan Kara
b947cee4b9 mm: implement find_get_pages_range() 
Implement a variant of find_get_pages() that stops iterating at given
index.  This may be substantial performance gain if the mapping is
sparse.  See following commit for details.  Furthermore lots of users of
this function (through pagevec_lookup()) actually want a range lookup
and all of them are currently open-coding this.

Also create corresponding pagevec_lookup_range() function.

Link: http://lkml.kernel.org/r/20170726114704.7626-4-jack@suse.cz
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2017-09-06 17:27:26 -07:00
Jan Kara
d72dc8a25a mm: make pagevec_lookup() update index 
Make pagevec_lookup() (and underlying find_get_pages()) update index to
the next page where iteration should continue.  Most callers want this
and also pagevec_lookup_tag() already does this.

Link: http://lkml.kernel.org/r/20170726114704.7626-3-jack@suse.cz
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2017-09-06 17:27:26 -07:00
Jan Kara
26b433d0da fscache: remove unused ->now_uncached callback 
Patch series "Ranged pagevec lookup", v2.

In this series I make pagevec_lookup() update the index (to be
consistent with pagevec_lookup_tag() and also as a preparation for
ranged lookups), provide ranged variant of pagevec_lookup() and use it
in places where it makes sense.  This not only removes some common code
but is also a measurable performance win for some use cases (see patch
4/10) where radix tree is sparse and searching & grabing of a page after
the end of the range has measurable overhead.

This patch (of 10):

The callback doesn't ever get called.  Remove it.

Link: http://lkml.kernel.org/r/20170726114704.7626-2-jack@suse.cz
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2017-09-06 17:27:26 -07:00
Michal Hocko
b93e0f329e mm, memory_hotplug: get rid of zonelists_mutex 
zonelists_mutex was introduced by commit 4eaf3f64397c ("mem-hotplug: fix
potential race while building zonelist for new populated zone") to
protect zonelist building from races.  This is no longer needed though
because both memory online and offline are fully serialized.  New users
have grown since then.

Notably setup_per_zone_wmarks wants to prevent from races between memory
hotplug, khugepaged setup and manual min_free_kbytes update via sysctl
(see cfd3da1e49bb ("mm: Serialize access to min_free_kbytes").  Let's
add a private lock for that purpose.  This will not prevent from seeing
halfway through memory hotplug operation but that shouldn't be a big
deal becuse memory hotplug will update watermarks explicitly so we will
eventually get a full picture.  The lock just makes sure we won't race
when updating watermarks leading to weird results.

Also __build_all_zonelists manipulates global data so add a private lock
for it as well.  This doesn't seem to be necessary today but it is more
robust to have a lock there.

While we are at it make sure we document that memory online/offline
depends on a full serialization either via mem_hotplug_begin() or
device_lock.

Link: http://lkml.kernel.org/r/20170721143915.14161-9-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Joonsoo Kim <js1304@gmail.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Shaohua Li <shaohua.li@intel.com>
Cc: Toshi Kani <toshi.kani@hpe.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Haicheng Li <haicheng.li@linux.intel.com>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2017-09-06 17:27:26 -07:00
Michal Hocko
72675e131e mm, memory_hotplug: drop zone from build_all_zonelists 
build_all_zonelists gets a zone parameter to initialize zone's pagesets.
There is only a single user which gives a non-NULL zone parameter and
that one doesn't really need the rest of the build_all_zonelists (see
commit 6dcd73d7011b ("memory-hotplug: allocate zone's pcp before
onlining pages")).

Therefore remove setup_zone_pageset from build_all_zonelists and call it
from its only user directly.  This will also remove a pointless zonlists
rebuilding which is always good.

Link: http://lkml.kernel.org/r/20170721143915.14161-5-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Joonsoo Kim <js1304@gmail.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Shaohua Li <shaohua.li@intel.com>
Cc: Toshi Kani <toshi.kani@hpe.com>
Cc: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2017-09-06 17:27:25 -07:00
Michal Hocko
c9bff3eebc mm, page_alloc: rip out ZONELIST_ORDER_ZONE 
Patch series "cleanup zonelists initialization", v1.

This is aimed at cleaning up the zonelists initialization code we have
but the primary motivation was bug report [2] which got resolved but the
usage of stop_machine is just too ugly to live.  Most patches are
straightforward but 3 of them need a special consideration.

Patch 1 removes zone ordered zonelists completely.  I am CCing linux-api
because this is a user visible change.  As I argue in the patch
description I do not think we have a strong usecase for it these days.
I have kept sysctl in place and warn into the log if somebody tries to
configure zone lists ordering.  If somebody has a real usecase for it we
can revert this patch but I do not expect anybody will actually notice
runtime differences.  This patch is not strictly needed for the rest but
it made patch 6 easier to implement.

Patch 7 removes stop_machine from build_all_zonelists without adding any
special synchronization between iterators and updater which I _believe_
is acceptable as explained in the changelog.  I hope I am not missing
anything.

Patch 8 then removes zonelists_mutex which is kind of ugly as well and
not really needed AFAICS but a care should be taken when double checking
my thinking.

This patch (of 9):

Supporting zone ordered zonelists costs us just a lot of code while the
usefulness is arguable if existent at all.  Mel has already made node
ordering default on 64b systems.  32b systems are still using
ZONELIST_ORDER_ZONE because it is considered better to fallback to a
different NUMA node rather than consume precious lowmem zones.

This argument is, however, weaken by the fact that the memory reclaim
has been reworked to be node rather than zone oriented.  This means that
lowmem requests have to skip over all highmem pages on LRUs already and
so zone ordering doesn't save the reclaim time much.  So the only
advantage of the zone ordering is under a light memory pressure when
highmem requests do not ever hit into lowmem zones and the lowmem
pressure doesn't need to reclaim.

Considering that 32b NUMA systems are rather suboptimal already and it
is generally advisable to use 64b kernel on such a HW I believe we
should rather care about the code maintainability and just get rid of
ZONELIST_ORDER_ZONE altogether.  Keep systcl in place and warn if
somebody tries to set zone ordering either from kernel command line or
the sysctl.

[mhocko@suse.com: reading vm.numa_zonelist_order will never terminate]
Link: http://lkml.kernel.org/r/20170721143915.14161-2-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Acked-by: Mel Gorman <mgorman@suse.de>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Joonsoo Kim <js1304@gmail.com>
Cc: Shaohua Li <shaohua.li@intel.com>
Cc: Toshi Kani <toshi.kani@hpe.com>
Cc: Abdul Haleem <abdhalee@linux.vnet.ibm.com>
Cc: <linux-api@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2017-09-06 17:27:25 -07:00
Michal Hocko
e5e6893026 mm, memory_hotplug: display allowed zones in the preferred ordering 
Prior to commit f1dd2cd13c4b ("mm, memory_hotplug: do not associate
hotadded memory to zones until online") we used to allow to change the
valid zone types of a memory block if it is adjacent to a different zone
type.

This fact was reflected in memoryNN/valid_zones by the ordering of
printed zones.  The first one was default (echo online > memoryNN/state)
and the other one could be onlined explicitly by online_{movable,kernel}.

This behavior was removed by the said patch and as such the ordering was
not all that important.  In most cases a kernel zone would be default
anyway.  The only exception is movable_node handled by "mm,
memory_hotplug: support movable_node for hotpluggable nodes".

Let's reintroduce this behavior again because later patch will remove
the zone overlap restriction and so user will be allowed to online
kernel resp.  movable block regardless of its placement.  Original
behavior will then become significant again because it would be
non-trivial for users to see what is the default zone to online into.

Implementation is really simple.  Pull out zone selection out of
move_pfn_range into zone_for_pfn_range helper and use it in
show_valid_zones to display the zone for default onlining and then both
kernel and movable if they are allowed.  Default online zone is not
duplicated.

Link: http://lkml.kernel.org/r/20170714121233.16861-2-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Acked-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Reza Arbab <arbab@linux.vnet.ibm.com>
Cc: Yasuaki Ishimatsu <yasu.isimatu@gmail.com>
Cc: Xishi Qiu <qiuxishi@huawei.com>
Cc: Kani Toshimitsu <toshi.kani@hpe.com>
Cc: <slaoub@gmail.com>
Cc: Daniel Kiper <daniel.kiper@oracle.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: Wei Yang <richard.weiyang@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2017-09-06 17:27:25 -07:00
Chris Wilson
d460acb5bd mm: track actual nr_scanned during shrink_slab() 
Some shrinkers may only be able to free a bunch of objects at a time,
and so free more than the requested nr_to_scan in one pass.

Whilst other shrinkers may find themselves even unable to scan as many
objects as they counted, and so underreport.  Account for the extra
freed/scanned objects against the total number of objects we intend to
scan, otherwise we may end up penalising the slab far more than
intended.  Similarly, we want to add the underperforming scan to the
deferred pass so that we try harder and harder in future passes.

Link: http://lkml.kernel.org/r/20170822135325.9191-1-chris@chris-wilson.co.uk
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Hillf Danton <hillf.zj@alibaba-inc.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Shaohua Li <shli@fb.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2017-09-06 17:27:24 -07:00
Kees Cook
2482ddec67 mm: add SLUB free list pointer obfuscation 
This SLUB free list pointer obfuscation code is modified from Brad
Spengler/PaX Team's code in the last public patch of grsecurity/PaX
based on my understanding of the code.  Changes or omissions from the
original code are mine and don't reflect the original grsecurity/PaX
code.

This adds a per-cache random value to SLUB caches that is XORed with
their freelist pointer address and value.  This adds nearly zero
overhead and frustrates the very common heap overflow exploitation
method of overwriting freelist pointers.

A recent example of the attack is written up here:

  http://cyseclabs.com/blog/cve-2016-6187-heap-off-by-one-exploit

and there is a section dedicated to the technique the book "A Guide to
Kernel Exploitation: Attacking the Core".

This is based on patches by Daniel Micay, and refactored to minimize the
use of #ifdef.

With 200-count cycles of "hackbench -g 20 -l 1000" I saw the following
run times:

 before:
 	mean 10.11882499999999999995
	variance .03320378329145728642
	stdev .18221905304181911048

  after:
	mean 10.12654000000000000014
	variance .04700556623115577889
	stdev .21680767106160192064

The difference gets lost in the noise, but if the above is to be taken
literally, using CONFIG_FREELIST_HARDENED is 0.07% slower.

Link: http://lkml.kernel.org/r/20170802180609.GA66807@beast
Signed-off-by: Kees Cook <keescook@chromium.org>
Suggested-by: Daniel Micay <danielmicay@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Tycho Andersen <tycho@docker.com>
Cc: Alexander Popov <alex.popov@linux.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2017-09-06 17:27:24 -07:00
Ross Zwisler
527b19d080 dax: move all DAX radix tree defs to fs/dax.c 
Now that we no longer insert struct page pointers in DAX radix trees the
page cache code no longer needs to know anything about DAX exceptional
entries.  Move all the DAX exceptional entry definitions from dax.h to
fs/dax.c.

Link: http://lkml.kernel.org/r/20170724170616.25810-6-ross.zwisler@linux.intel.com
Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Suggested-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: "Darrick J. Wong" <darrick.wong@oracle.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Matthew Wilcox <mawilcox@microsoft.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2017-09-06 17:27:24 -07:00
Ross Zwisler
d01ad197ac dax: remove DAX code from page_cache_tree_insert() 
Now that we no longer insert struct page pointers in DAX radix trees we
can remove the special casing for DAX in page_cache_tree_insert().

This also allows us to make dax_wake_mapping_entry_waiter() local to
fs/dax.c, removing it from dax.h.

Link: http://lkml.kernel.org/r/20170724170616.25810-5-ross.zwisler@linux.intel.com
Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Suggested-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: "Darrick J. Wong" <darrick.wong@oracle.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Matthew Wilcox <mawilcox@microsoft.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2017-09-06 17:27:24 -07:00
Ross Zwisler
91d25ba8a6 dax: use common 4k zero page for dax mmap reads 
When servicing mmap() reads from file holes the current DAX code
allocates a page cache page of all zeroes and places the struct page
pointer in the mapping->page_tree radix tree.

This has three major drawbacks:

1) It consumes memory unnecessarily. For every 4k page that is read via
   a DAX mmap() over a hole, we allocate a new page cache page. This
   means that if you read 1GiB worth of pages, you end up using 1GiB of
   zeroed memory. This is easily visible by looking at the overall
   memory consumption of the system or by looking at /proc/[pid]/smaps:

	7f62e72b3000-7f63272b3000 rw-s 00000000 103:00 12   /root/dax/data
	Size:            1048576 kB
	Rss:             1048576 kB
	Pss:             1048576 kB
	Shared_Clean:          0 kB
	Shared_Dirty:          0 kB
	Private_Clean:   1048576 kB
	Private_Dirty:         0 kB
	Referenced:      1048576 kB
	Anonymous:             0 kB
	LazyFree:              0 kB
	AnonHugePages:         0 kB
	ShmemPmdMapped:        0 kB
	Shared_Hugetlb:        0 kB
	Private_Hugetlb:       0 kB
	Swap:                  0 kB
	SwapPss:               0 kB
	KernelPageSize:        4 kB
	MMUPageSize:           4 kB
	Locked:                0 kB

2) It is slower than using a common zero page because each page fault
   has more work to do. Instead of just inserting a common zero page we
   have to allocate a page cache page, zero it, and then insert it. Here
   are the average latencies of dax_load_hole() as measured by ftrace on
   a random test box:

    Old method, using zeroed page cache pages:	3.4 us
    New method, using the common 4k zero page:	0.8 us

   This was the average latency over 1 GiB of sequential reads done by
   this simple fio script:

     [global]
     size=1G
     filename=/root/dax/data
     fallocate=none
     [io]
     rw=read
     ioengine=mmap

3) The fact that we had to check for both DAX exceptional entries and
   for page cache pages in the radix tree made the DAX code more
   complex.

Solve these issues by following the lead of the DAX PMD code and using a
common 4k zero page instead.  As with the PMD code we will now insert a
DAX exceptional entry into the radix tree instead of a struct page
pointer which allows us to remove all the special casing in the DAX
code.

Note that we do still pretty aggressively check for regular pages in the
DAX radix tree, especially where we take action based on the bits set in
the page.  If we ever find a regular page in our radix tree now that
most likely means that someone besides DAX is inserting pages (which has
happened lots of times in the past), and we want to find that out early
and fail loudly.

This solution also removes the extra memory consumption.  Here is that
same /proc/[pid]/smaps after 1GiB of reading from a hole with the new
code:

	7f2054a74000-7f2094a74000 rw-s 00000000 103:00 12   /root/dax/data
	Size:            1048576 kB
	Rss:                   0 kB
	Pss:                   0 kB
	Shared_Clean:          0 kB
	Shared_Dirty:          0 kB
	Private_Clean:         0 kB
	Private_Dirty:         0 kB
	Referenced:            0 kB
	Anonymous:             0 kB
	LazyFree:              0 kB
	AnonHugePages:         0 kB
	ShmemPmdMapped:        0 kB
	Shared_Hugetlb:        0 kB
	Private_Hugetlb:       0 kB
	Swap:                  0 kB
	SwapPss:               0 kB
	KernelPageSize:        4 kB
	MMUPageSize:           4 kB
	Locked:                0 kB

Overall system memory consumption is similarly improved.

Another major change is that we remove dax_pfn_mkwrite() from our fault
flow, and instead rely on the page fault itself to make the PTE dirty
and writeable.  The following description from the patch adding the
vm_insert_mixed_mkwrite() call explains this a little more:

   "To be able to use the common 4k zero page in DAX we need to have our
    PTE fault path look more like our PMD fault path where a PTE entry
    can be marked as dirty and writeable as it is first inserted rather
    than waiting for a follow-up dax_pfn_mkwrite() =>
    finish_mkwrite_fault() call.

    Right now we can rely on having a dax_pfn_mkwrite() call because we
    can distinguish between these two cases in do_wp_page():

            case 1: 4k zero page => writable DAX storage
            case 2: read-only DAX storage => writeable DAX storage

    This distinction is made by via vm_normal_page(). vm_normal_page()
    returns false for the common 4k zero page, though, just as it does
    for DAX ptes. Instead of special casing the DAX + 4k zero page case
    we will simplify our DAX PTE page fault sequence so that it matches
    our DAX PMD sequence, and get rid of the dax_pfn_mkwrite() helper.
    We will instead use dax_iomap_fault() to handle write-protection
    faults.

    This means that insert_pfn() needs to follow the lead of
    insert_pfn_pmd() and allow us to pass in a 'mkwrite' flag. If
    'mkwrite' is set insert_pfn() will do the work that was previously
    done by wp_page_reuse() as part of the dax_pfn_mkwrite() call path"

Link: http://lkml.kernel.org/r/20170724170616.25810-4-ross.zwisler@linux.intel.com
Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: "Darrick J. Wong" <darrick.wong@oracle.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Matthew Wilcox <mawilcox@microsoft.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2017-09-06 17:27:24 -07:00
Ross Zwisler
b2770da642 mm: add vm_insert_mixed_mkwrite() 
When servicing mmap() reads from file holes the current DAX code
allocates a page cache page of all zeroes and places the struct page
pointer in the mapping->page_tree radix tree.  This has three major
drawbacks:

1) It consumes memory unnecessarily. For every 4k page that is read via
   a DAX mmap() over a hole, we allocate a new page cache page. This
   means that if you read 1GiB worth of pages, you end up using 1GiB of
   zeroed memory.

2) It is slower than using a common zero page because each page fault
   has more work to do. Instead of just inserting a common zero page we
   have to allocate a page cache page, zero it, and then insert it.

3) The fact that we had to check for both DAX exceptional entries and
   for page cache pages in the radix tree made the DAX code more
   complex.

This series solves these issues by following the lead of the DAX PMD
code and using a common 4k zero page instead.  This reduces memory usage
and decreases latencies for some workloads, and it simplifies the DAX
code, removing over 100 lines in total.

This patch (of 5):

To be able to use the common 4k zero page in DAX we need to have our PTE
fault path look more like our PMD fault path where a PTE entry can be
marked as dirty and writeable as it is first inserted rather than
waiting for a follow-up dax_pfn_mkwrite() => finish_mkwrite_fault()
call.

Right now we can rely on having a dax_pfn_mkwrite() call because we can
distinguish between these two cases in do_wp_page():

	case 1: 4k zero page => writable DAX storage
	case 2: read-only DAX storage => writeable DAX storage

This distinction is made by via vm_normal_page().  vm_normal_page()
returns false for the common 4k zero page, though, just as it does for
DAX ptes.  Instead of special casing the DAX + 4k zero page case we will
simplify our DAX PTE page fault sequence so that it matches our DAX PMD
sequence, and get rid of the dax_pfn_mkwrite() helper.  We will instead
use dax_iomap_fault() to handle write-protection faults.

This means that insert_pfn() needs to follow the lead of
insert_pfn_pmd() and allow us to pass in a 'mkwrite' flag.  If 'mkwrite'
is set insert_pfn() will do the work that was previously done by
wp_page_reuse() as part of the dax_pfn_mkwrite() call path.

Link: http://lkml.kernel.org/r/20170724170616.25810-2-ross.zwisler@linux.intel.com
Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: "Darrick J. Wong" <darrick.wong@oracle.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Matthew Wilcox <mawilcox@microsoft.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2017-09-06 17:27:24 -07:00
Linus Torvalds
e7d0c41ecc Device properties framework updates for v4.14-rc1 
- Introduce fwnode operations for all of the separate types of
    "firmware nodes" that can be handled by the device properties
    framework and drop the type field from struct fwnode_handle
    (Sakari Ailus, Arnd Bergmann).
 
  - Make the device properties framework use const fwnode arguments
    where possible (Sakari Ailus).
 
  - Add a helper for the consolidated handling of node references
    to the device properties framework (Sakari Ailus).
 
  - Switch over the ACPI part of the device properties framework
    to the new UUID API (Andy Shevchenko).
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCAAGBQJZrcHoAAoJEILEb/54YlRxVH4P/i7MVmWxZW1qosqt8NbI+kqu
 rjxBiQ1YaPuwWiZk5LMRQWIr4Y52v+8uwoVAoQbpfkpQpxpUtIApqFGGHkOK091S
 6wcwdAJv78m7dQGJZ96nQkBdw+qCUG+s9L3KMfXYiipwyG7bg4BVcs5jZcIqcZ4F
 2xecG6DMn4ESwFbZyVULWyQh50tSBztaHEG6AU2T/07yXU3RNJmwAVVZzpHdtA80
 mDbWcCFjcmhrpPa0Aq6MrSMjKso1zd8Es+xwYhXsIQpD1l0HhLLQ0X4veSPcPG4B
 aSNEYuribpvZ2FIRti7H7gi/F+Arm9vPdc9WHbOPLOIF1z+GJKiqjBuxUrfXKPqG
 v1W3f1bcApe9DfmC5z1wZBi2d7thQOzRFfc8WRrMybQ6z1MAqqe5PfAlgpMFmL22
 8ZCzzXIBUsfUjVlwYBvgkKvpLioEl88otWGdhewWY6F+DZ8+vPyvrpi15P36Xgos
 ijX89cvyfze3m5GW08hQ6DTOVvaFoMyucYfSo6/MBamw9fbUgiEgBfUAsQyb3sRU
 8g1KrwkAX8KFmoocX/AVjvwVBaKNdYeJ9Gy6EItAPxNl+F1q6vjkO0r/VeSrO1KW
 3GRqw5MZP35DD9IRo4DTAjwtNVkgIUjpG/hfB7l3PFdDxWfeiM5tf2zMExhT0nIR
 h8s8mn61KZp0gpsE02FS
 =0rnk
 -----END PGP SIGNATURE-----

Merge tag 'devprop-4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull device properties framework updates from Rafael Wysocki:
 "These introduce fwnode operations for all of the separate types of
  'firmware nodes' that can be handled by the device properties
  framework, make the framework use const fwnode arguments all over, add
  a helper for the consolidated handling of node references and switch
  over the framework to the new UUID API.

  Specifics:

   - Introduce fwnode operations for all of the separate types of
     'firmware nodes' that can be handled by the device properties
     framework and drop the type field from struct fwnode_handle (Sakari
     Ailus, Arnd Bergmann).

   - Make the device properties framework use const fwnode arguments
     where possible (Sakari Ailus).

   - Add a helper for the consolidated handling of node references to
     the device properties framework (Sakari Ailus).

   - Switch over the ACPI part of the device properties framework to the
     new UUID API (Andy Shevchenko)"

* tag 'devprop-4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI: device property: Switch to use new generic UUID API
  device property: export irqchip_fwnode_ops
  device property: Introduce fwnode_property_get_reference_args
  device property: Constify fwnode property API
  device property: Constify argument to pset fwnode backend
  ACPI: Constify internal fwnode arguments
  ACPI: Constify acpi_bus helper functions, switch to macros
  ACPI: Prepare for constifying acpi_get_next_subnode() fwnode argument
  device property: Get rid of struct fwnode_handle type field
  ACPI: Use IS_ERR_OR_NULL() instead of non-NULL check in is_acpi_data_node()
 2017-09-05 12:50:00 -07:00
Linus Torvalds
53ac64aac9 ACPI updates for v4.14-rc1 
- Update the ACPICA code in the kernel to upstream revision 20170728
    including:
    * Alias operator handling update (Bob Moore).
    * Deferred resolution of reference package elements (Bob Moore).
    * Support for the _DMA method in walk resources (Bob Moore).
    * Tables handling update and support for deferred table
      verification (Lv Zheng).
    * Update of SMMU models for IORT (Robin Murphy).
    * Compiler and disassembler updates (Alex James, Erik Schmauss,
      Ganapatrao Kulkarni, James Morse).
    * Tools updates (Erik Schmauss, Lv Zheng).
    * Assorted minor fixes and cleanups (Bob Moore, Kees Cook,
      Lv Zheng, Shao Ming).
 
  - Rework the initialization of non-wakeup GPEs with method handlers
    in order to address a boot crash on some systems with Thunderbolt
    devices connected at boot time where we miss an early hotplug
    event due to a delay in GPE enabling (Rafael Wysocki).
 
  - Rework the handling of PCI bridges when setting up ACPI-based
    device wakeup in order to avoid disabling wakeup for bridges
    prematurely (Rafael Wysocki).
 
  - Consolidate Apple DMI checks throughout the tree, add support for
    Apple device properties to the device properties framework and
    use these properties for the handling of I2C and SPI devices on
    Apple systems (Lukas Wunner).
 
  - Add support for _DMA to the ACPI-based device properties lookup
    code and make it possible to use the information from there to
    configure DMA regions on ARM64 systems (Lorenzo Pieralisi).
 
  - Fix several issues in the APEI code, add support for exporting
    the BERT error region over sysfs and update APEI MAINTAINERS
    entry with reviewers information (Borislav Petkov, Dongjiu Geng,
    Loc Ho, Punit Agrawal, Tony Luck, Yazen Ghannam).
 
  - Fix a potential initialization ordering issue in the ACPI EC
    driver and clean it up somewhat (Lv Zheng).
 
  - Update the ACPI SPCR driver to extend the existing XGENE 8250
    workaround in it to a new platform (m400) and to work around
    an Xgene UART clock issue (Graeme Gregory).
 
  - Add a new utility function to the ACPI core to support using
    ACPI OEM ID / OEM Table ID / Revision for system identification
    in blacklisting or similar and switch over the existing code
    already using this information to this new interface (Toshi Kani).
 
  - Fix an xpower PMIC issue related to GPADC reads that always return
    0 without extra pin manipulations (Hans de Goede).
 
  - Add statements to print debug messages in a couple of places in
    the ACPI core for easier diagnostics (Rafael Wysocki).
 
  - Clean up the ACPI processor driver slightly (Colin Ian King,
    Hanjun Guo).
 
  - Clean up the ACPI x86 boot code somewhat (Andy Shevchenko).
 
  - Add a quirk for Dell OptiPlex 9020M to the ACPI backlight
    driver (Alex Hung).
 
  - Assorted fixes, cleanups and updates related to ACPI (Amitoj Kaur
    Chawla, Bhumika Goyal, Frank Rowand, Jean Delvare, Punit Agrawal,
    Ronald Tschalär, Sumeet Pawnikar).
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCAAGBQJZrcE+AAoJEILEb/54YlRxVGAP/RKzkJlYlOIXtMjf4XWg5ZfJ
 RKZA68E9DW179KoBoTCVPD6/eD5UoEJ7fsWXFU2Hgp2xL3N1mZMAJHgAE4GoAwCx
 uImoYvQgdPna7DawzRIFkvkfceYxNyh+KaV9s7xne4hAwsB7JzP9yf5Ywll53+oF
 Le27/r6lDOaWhG7uYcxSabnQsWZQkBF5mj2GPzEpKDIHcLA1Vii0URzm7mAHdZsz
 vGjYhxrshKYEVdkLSRn536m1rEfp2fqsRJ5wqNAazZJr6Cs1WIfNVuv/RfduRJpG
 /zHIRAmgKV+3jp39cBpjdnexLczb1rGiCV1yZOvwCNM7jy4evL8vbL7VgcUCopaj
 fHbF34chNG/hKJd3Zn3RRCTNzCs6bv+txslOMARxji5eyr2Q4KuVnvg5LM4hxOUP
 23FvcYkBYWu4QCNLOTnC7y2OqK6WzOvDpfi7hf13Z42iNzeAUbwt1sVF0/OCwL51
 Og6blSy2x8FidKp8oaBBboBzHEiKWnXBj/Hw8KEHVcsqZv1ZC6igNRAL3tjxamU8
 98/Z2NSZHYPrrrn13tT9ywISYXReXzUF85787+0ofugvDe8/QyBH6UhzzZc/xKVA
 t329JEjEFZZSLgxMIIa9bXoQANxkeZEGsxN6FfwvQhyIVdagLF3UvCjZl/q2NScC
 9n++s32qfUBRHetGODWc
 =6Ke9
 -----END PGP SIGNATURE-----

Merge tag 'acpi-4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull ACPI updates from Rafael Wysocki:
 "These include a usual ACPICA code update (this time to upstream
  revision 20170728), a fix for a boot crash on some systems with
  Thunderbolt devices connected at boot time, a rework of the handling
  of PCI bridges when setting up device wakeup, new support for Apple
  device properties, support for DMA configurations reported via ACPI on
  ARM64, APEI-related updates, ACPI EC driver updates and assorted minor
  modifications in several places.

  Specifics:

   - Update the ACPICA code in the kernel to upstream revision 20170728
     including:
      * Alias operator handling update (Bob Moore).
      * Deferred resolution of reference package elements (Bob Moore).
      * Support for the _DMA method in walk resources (Bob Moore).
      * Tables handling update and support for deferred table
        verification (Lv Zheng).
      * Update of SMMU models for IORT (Robin Murphy).
      * Compiler and disassembler updates (Alex James, Erik Schmauss,
        Ganapatrao Kulkarni, James Morse).
      * Tools updates (Erik Schmauss, Lv Zheng).
      * Assorted minor fixes and cleanups (Bob Moore, Kees Cook, Lv
        Zheng, Shao Ming).

   - Rework the initialization of non-wakeup GPEs with method handlers
     in order to address a boot crash on some systems with Thunderbolt
     devices connected at boot time where we miss an early hotplug event
     due to a delay in GPE enabling (Rafael Wysocki).

   - Rework the handling of PCI bridges when setting up ACPI-based
     device wakeup in order to avoid disabling wakeup for bridges
     prematurely (Rafael Wysocki).

   - Consolidate Apple DMI checks throughout the tree, add support for
     Apple device properties to the device properties framework and use
     these properties for the handling of I2C and SPI devices on Apple
     systems (Lukas Wunner).

   - Add support for _DMA to the ACPI-based device properties lookup
     code and make it possible to use the information from there to
     configure DMA regions on ARM64 systems (Lorenzo Pieralisi).

   - Fix several issues in the APEI code, add support for exporting the
     BERT error region over sysfs and update APEI MAINTAINERS entry with
     reviewers information (Borislav Petkov, Dongjiu Geng, Loc Ho, Punit
     Agrawal, Tony Luck, Yazen Ghannam).

   - Fix a potential initialization ordering issue in the ACPI EC driver
     and clean it up somewhat (Lv Zheng).

   - Update the ACPI SPCR driver to extend the existing XGENE 8250
     workaround in it to a new platform (m400) and to work around an
     Xgene UART clock issue (Graeme Gregory).

   - Add a new utility function to the ACPI core to support using ACPI
     OEM ID / OEM Table ID / Revision for system identification in
     blacklisting or similar and switch over the existing code already
     using this information to this new interface (Toshi Kani).

   - Fix an xpower PMIC issue related to GPADC reads that always return
     0 without extra pin manipulations (Hans de Goede).

   - Add statements to print debug messages in a couple of places in the
     ACPI core for easier diagnostics (Rafael Wysocki).

   - Clean up the ACPI processor driver slightly (Colin Ian King, Hanjun
     Guo).

   - Clean up the ACPI x86 boot code somewhat (Andy Shevchenko).

   - Add a quirk for Dell OptiPlex 9020M to the ACPI backlight driver
     (Alex Hung).

   - Assorted fixes, cleanups and updates related to ACPI (Amitoj Kaur
     Chawla, Bhumika Goyal, Frank Rowand, Jean Delvare, Punit Agrawal,
     Ronald Tschalär, Sumeet Pawnikar)"

* tag 'acpi-4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (75 commits)
  ACPI / APEI: Suppress message if HEST not present
  intel_pstate: convert to use acpi_match_platform_list()
  ACPI / blacklist: add acpi_match_platform_list()
  ACPI, APEI, EINJ: Subtract any matching Register Region from Trigger resources
  ACPI: make device_attribute const
  ACPI / sysfs: Extend ACPI sysfs to provide access to boot error region
  ACPI: APEI: fix the wrong iteration of generic error status block
  ACPI / processor: make function acpi_processor_check_duplicates() static
  ACPI / EC: Clean up EC GPE mask flag
  ACPI: EC: Fix possible issues related to EC initialization order
  ACPI / PM: Add debug statements to acpi_pm_notify_handler()
  ACPI: Add debug statements to acpi_global_event_handler()
  ACPI / scan: Enable GPEs before scanning the namespace
  ACPICA: Make it possible to enable runtime GPEs earlier
  ACPICA: Dispatch active GPEs at init time
  ACPI: SPCR: work around clock issue on xgene UART
  ACPI: SPCR: extend XGENE 8250 workaround to m400
  ACPI / LPSS: Don't abort ACPI scan on missing mem resource
  mailbox: pcc: Drop uninformative output during boot
  ACPI/IORT: Add IORT named component memory address limits
  ...
 2017-09-05 12:45:03 -07:00
Linus Torvalds
439644096c Power management updates for v4.14-rc1 
- Drop the P-state selection algorithm based on a PID controller
    from intel_pstate and make it use the same P-state selection
    method (based on the CPU load) for all types of systems in the
    active mode (Rafael Wysocki, Srinivas Pandruvada).
 
  - Rework the cpufreq core and governors to make it possible to
    take cross-CPU utilization updates into account and modify the
    schedutil governor to actually do so (Viresh Kumar).
 
  - Clean up the handling of transition latency information in the
    cpufreq core and untangle it from the information on which drivers
    cannot do dynamic frequency switching (Viresh Kumar).
 
  - Add support for new SoCs (MT2701/MT7623 and MT7622) to the
    mediatek cpufreq driver and update its DT bindings (Sean Wang).
 
  - Modify the cpufreq dt-platdev driver to autimatically create
    cpufreq devices for the new (v2) Operating Performance Points
    (OPP) DT bindings and update its whitelist of supported systems
    (Viresh Kumar, Shubhrajyoti Datta, Marc Gonzalez, Khiem Nguyen,
    Finley Xiao).
 
  - Add support for Ux500 to the cpufreq-dt driver and drop the
    obsolete dbx500 cpufreq driver (Linus Walleij, Arnd Bergmann).
 
  - Add new SoC (R8A7795) support to the cpufreq rcar driver (Khiem
    Nguyen).
 
  - Fix and clean up assorted issues in the cpufreq drivers and core
    (Arvind Yadav, Christophe Jaillet, Colin Ian King, Gustavo Silva,
    Julia Lawall, Leonard Crestez, Rob Herring, Sudeep Holla).
 
  - Update the IO-wait boost handling in the schedutil governor to
    make it less aggressive (Joel Fernandes).
 
  - Rework system suspend diagnostics to make it print fewer messages
    to the kernel log by default, add a sysfs knob to allow more
    suspend-related messages to be printed and add Low Power S0 Idle
    constraints checks to the ACPI suspend-to-idle code (Rafael
    Wysocki, Srinivas Pandruvada).
 
  - Prefer suspend-to-idle over S3 on ACPI-based systems with the
    ACPI_FADT_LOW_POWER_S0 flag set and the Low Power Idle S0 _DSM
    interface present in the ACPI tables (Rafael Wysocki).
 
  - Update documentation related to system sleep and rename a number
    of items in the code to make it cleare that they are related to
    suspend-to-idle (Rafael Wysocki).
 
  - Export a variable allowing device drivers to check the target
    system sleep state from the core system suspend code (Florian
    Fainelli).
 
  - Clean up the cpuidle subsystem to handle the polling state on
    x86 in a more straightforward way and to use %pOF instead of
    full_name (Rafael Wysocki, Rob Herring).
 
  - Update the devfreq framework to fix and clean up a few minor
    issues (Chanwoo Choi, Rob Herring).
 
  - Extend diagnostics in the generic power domains (genpd) framework
    and clean it up slightly (Thara Gopinath, Rob Herring).
 
  - Fix and clean up a couple of issues in the operating performance
    points (OPP) framework (Viresh Kumar, Waldemar Rymarkiewicz).
 
  - Add support for RV1108 to the rockchip-io Adaptive Voltage Scaling
    (AVS) driver (David Wu).
 
  - Fix the usage of notifiers in CPU power management on some
    platforms (Alex Shi).
 
  - Update the pm-graph system suspend/hibernation and boot profiling
    utility (Todd Brandt).
 
  - Make it possible to run the cpupower utility without CPU0 (Prarit
    Bhargava).
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCAAGBQJZrcDJAAoJEILEb/54YlRx9FUQAIUKvWBAARc61ZIZXjbqZF1v
 aEMOBuksFns0CMekdptSic6n4wc81E/XYMS8yDhOOMpyDzfAZsTWjmu+gKwN7w3l
 E/yf/NVlhob9JZ7MqGgqD4EUFfFIaKBXPlWFdDi2rdCUXE2L8xJ7rla8i7zyZlc5
 pYHfAppBbF4qUcEY4OoOVOOGRZCfMdiLXj0iZOhMX8Y6yLBRk/AjnVADYsF33hoj
 gBEfomU+H0K5V8nQEp0ZFKDArPwL+oElHQj6i+nxBpGfPM5evvLXhHOyR6AsldJ5
 J4YI1kMuQNSCmvHMqOTxTYyJf8Jcf3Fj4wcjwaVMVGceY1lz6McAKknnFnCqCvz+
 mskn84gFCBCM8EoJDqRf0b9MQHcuRyQKM+yw4tjnR9r8yd32erb85ZWFHcPWYhCT
 fZatNOwFFv2MU+2vo5J3yeUNSWIKT+uBjy+tKPbrDkUwpKZVRj3Oj+hP3Mq9NE8U
 YBqltsj7tmrdA634zI8C7jfS6wF221S0fId/iPszwmPJaVn/lq8Ror7pWL5YI8U7
 SCJFjiqDiGmAcQEkuWwFAQnscZkyHpO+Y3A+jfXl/izoaZETaI5+ceIHBaocm3+5
 XrOOpHS3ik8EHf9ji0KFCKZ/pYDwllday3cBQPWo3sMIzpQ2lrjbqdnE1cVnBrld
 OtHZAeD/jLUXuY6XW2jN
 =mAiV
 -----END PGP SIGNATURE-----

Merge tag 'pm-4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull power management updates from Rafael Wysocki:
 "This time (again) cpufreq gets the majority of changes which mostly
  are driver updates (including a major consolidation of intel_pstate),
  some schedutil governor modifications and core cleanups.

  There also are some changes in the system suspend area, mostly related
  to diagnostics and debug messages plus some renames of things related
  to suspend-to-idle. One major change here is that suspend-to-idle is
  now going to be preferred over S3 on systems where the ACPI tables
  indicate to do so and provide requsite support (the Low Power Idle S0
  _DSM in particular). The system sleep documentation and the tools
  related to it are updated too.

  The rest is a few cpuidle changes (nothing major), devfreq updates,
  generic power domains (genpd) framework updates and a few assorted
  modifications elsewhere.

  Specifics:

   - Drop the P-state selection algorithm based on a PID controller from
     intel_pstate and make it use the same P-state selection method
     (based on the CPU load) for all types of systems in the active mode
     (Rafael Wysocki, Srinivas Pandruvada).

   - Rework the cpufreq core and governors to make it possible to take
     cross-CPU utilization updates into account and modify the schedutil
     governor to actually do so (Viresh Kumar).

   - Clean up the handling of transition latency information in the
     cpufreq core and untangle it from the information on which drivers
     cannot do dynamic frequency switching (Viresh Kumar).

   - Add support for new SoCs (MT2701/MT7623 and MT7622) to the mediatek
     cpufreq driver and update its DT bindings (Sean Wang).

   - Modify the cpufreq dt-platdev driver to autimatically create
     cpufreq devices for the new (v2) Operating Performance Points (OPP)
     DT bindings and update its whitelist of supported systems (Viresh
     Kumar, Shubhrajyoti Datta, Marc Gonzalez, Khiem Nguyen, Finley
     Xiao).

   - Add support for Ux500 to the cpufreq-dt driver and drop the
     obsolete dbx500 cpufreq driver (Linus Walleij, Arnd Bergmann).

   - Add new SoC (R8A7795) support to the cpufreq rcar driver (Khiem
     Nguyen).

   - Fix and clean up assorted issues in the cpufreq drivers and core
     (Arvind Yadav, Christophe Jaillet, Colin Ian King, Gustavo Silva,
     Julia Lawall, Leonard Crestez, Rob Herring, Sudeep Holla).

   - Update the IO-wait boost handling in the schedutil governor to make
     it less aggressive (Joel Fernandes).

   - Rework system suspend diagnostics to make it print fewer messages
     to the kernel log by default, add a sysfs knob to allow more
     suspend-related messages to be printed and add Low Power S0 Idle
     constraints checks to the ACPI suspend-to-idle code (Rafael
     Wysocki, Srinivas Pandruvada).

   - Prefer suspend-to-idle over S3 on ACPI-based systems with the
     ACPI_FADT_LOW_POWER_S0 flag set and the Low Power Idle S0 _DSM
     interface present in the ACPI tables (Rafael Wysocki).

   - Update documentation related to system sleep and rename a number of
     items in the code to make it cleare that they are related to
     suspend-to-idle (Rafael Wysocki).

   - Export a variable allowing device drivers to check the target
     system sleep state from the core system suspend code (Florian
     Fainelli).

   - Clean up the cpuidle subsystem to handle the polling state on x86
     in a more straightforward way and to use %pOF instead of full_name
     (Rafael Wysocki, Rob Herring).

   - Update the devfreq framework to fix and clean up a few minor issues
     (Chanwoo Choi, Rob Herring).

   - Extend diagnostics in the generic power domains (genpd) framework
     and clean it up slightly (Thara Gopinath, Rob Herring).

   - Fix and clean up a couple of issues in the operating performance
     points (OPP) framework (Viresh Kumar, Waldemar Rymarkiewicz).

   - Add support for RV1108 to the rockchip-io Adaptive Voltage Scaling
     (AVS) driver (David Wu).

   - Fix the usage of notifiers in CPU power management on some
     platforms (Alex Shi).

   - Update the pm-graph system suspend/hibernation and boot profiling
     utility (Todd Brandt).

   - Make it possible to run the cpupower utility without CPU0 (Prarit
     Bhargava)"

* tag 'pm-4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (87 commits)
  cpuidle: Make drivers initialize polling state
  cpuidle: Move polling state initialization code to separate file
  cpuidle: Eliminate the CPUIDLE_DRIVER_STATE_START symbol
  cpufreq: imx6q: Fix imx6sx low frequency support
  cpufreq: speedstep-lib: make several arrays static, makes code smaller
  PM: docs: Delete the obsolete states.txt document
  PM: docs: Describe high-level PM strategies and sleep states
  PM / devfreq: Fix memory leak when fail to register device
  PM / devfreq: Add dependency on PM_OPP
  PM / devfreq: Move private devfreq_update_stats() into devfreq
  PM / devfreq: Convert to using %pOF instead of full_name
  PM / AVS: rockchip-io: add io selectors and supplies for RV1108
  cpufreq: ti: Fix 'of_node_put' being called twice in error handling path
  cpufreq: dt-platdev: Drop few entries from whitelist
  cpufreq: dt-platdev: Automatically create cpufreq device with OPP v2
  ARM: ux500: don't select CPUFREQ_DT
  cpuidle: Convert to using %pOF instead of full_name
  cpufreq: Convert to using %pOF instead of full_name
  PM / Domains: Convert to using %pOF instead of full_name
  cpufreq: Cap the default transition delay value to 10 ms
  ...
 2017-09-05 12:19:08 -07:00
Linus Torvalds
b42a362e6d Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid 
Pull HID update from Jiri Kosina:

 - Wacom driver fixes/updates (device name generation improvements,
   touch ring status support) from Jason Gerecke

 - T100 touchpad support from Hans de Goede

 - support for batteries driven by HID input reports, from Dmitry
   Torokhov

 - Arnd pointed out that driver_lock semaphore is superfluous, as driver
   core already provides all the necessary concurency protection.
   Removal patch from Binoy Jayan

 - logical minimum numbering improvements in sensor-hub driver, from
   Srinivas Pandruvada

 - support for Microsoft Win8 Wireless Radio Controls extensions from
   João Paulo Rechi Vita

 - assorted small fixes and device ID additions

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (28 commits)
  HID: prodikeys: constify snd_rawmidi_ops structures
  HID: sensor: constify platform_device_id
  HID: input: throttle battery uevents
  HID: usbmouse: constify usb_device_id and fix space before '[' error
  HID: usbkbd: constify usb_device_id and fix space before '[' error.
  HID: hid-sensor-hub: Force logical minimum to 1 for power and report state
  HID: wacom: Do not completely map WACOM_HID_WD_TOUCHRINGSTATUS usage
  HID: asus: Add T100CHI bluetooth keyboard dock touchpad support
  HID: ntrig: constify attribute_group structures.
  HID: logitech-hidpp: constify attribute_group structures.
  HID: sensor: constify attribute_group structures.
  HID: multitouch: constify attribute_group structures.
  HID: multitouch: use proper symbolic constant for 0xff310076 application
  HID: multitouch: Support Asus T304UA media keys
  HID: multitouch: Support HID_GD_WIRELESS_RADIO_CTLS
  HID: input: optionally use device id in battery name
  HID: input: map digitizer battery usage
  HID: Remove the semaphore driver_lock
  HID: wacom: add USB_HID dependency
  HID: add ALWAYS_POLL quirk for Logitech 0xc077
  ...
 2017-09-05 11:54:41 -07:00
Linus Torvalds
70b8e9eb3b This is the bulk of the GPIO changes for the v4.14 cycle: 
Core changes
 - Allow the GPIO irqchip to allocate IRQs dynamically. This is
   an important change on systems where only a restricted number
   of IRQs, lesser than the number of GPIO lines, can be utilized.
   Now we can allocate these on a first-come-first-served basis
   instead of hogging up valuable IRQ lines.
 - Serious fix-up of the kerneldoc documentation and inclusion
   into the kerneldoc builds.
 - Pulled in the IRQ simulator from the IRQ core tree and use
   this in the GPIO mockup driver for exhaustive testing of
   interrupt abilities.
 
 New drivers
 - New driver for ThunderX and OCTEON-TX. This is especially
   interesting as it picks up improvements from the IRQ core that
   allow us to handle fasteoi ACKs upwards in a hierarchy when
   there are IRQ flag latches on several levels in a hierarchy.
   Very interesting work here.
 - New subdriver for Renesas R-Car r8a7745 (RZ/G1E).
 
 Misc
 - Several fixes and improvements for Xilinx Zynq GPIO.
 - Support an enablement GPIO for the 74x164 GPIO.
 - Switch a bunch of chips to use devres to allocate irq
   descriptors.
 - A bunch of constification fixes.
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJZrmRvAAoJEEEQszewGV1zFd8P/0wwsPFfCY5tjqMwYcu2VIzA
 ZEPlN/Z14Xr/JC7X5N18qWaZSdqAP94do8fn1Utqr6mEOY71BAAmt1dRH3M651nz
 dyAnb5s8IlnFNrv2C3ksG4ArQP72y3uag7b/9fcDPSFBjQKHXP9zI5qhvxJI8XFY
 iesWkwkQayDzbKvm/bFWugclYjSNZCwtzGn2OD0zhh8vKchQBEdLYuiV06iEuvh4
 dkfpH5UhingJ0gMgMj3VLXvnaSPOQy321mnnF8cmHIwelZR8ij3JPQzirKB/cvTe
 fj/INc9/gXFOepFcEaQcWwspeXOXCjOajqfCyeLKLigj44E7pbv4HeTLJmQtCWv/
 fBlHnzjEJG7zZi8JOuKeMwMSc/6GPHBhlmZ4GjpMtIeNXQ8V2oosLbvSd5/whtPg
 u9QuDDeTJwjm1HY3kBNa50BKYrAAKIATHxnYAlGrDTf/9ea5Ld7AT/IfeGHS2AQR
 nV6I0byRYCxEVZUTPeYOMoHDNGgVgA9VPAhUUjLj6r6Kx2bS4Pn7KNvSNx24SQTU
 wP+rWDXRNJzIMr9+sWj3yAksYZPQSpV2+y/VizeHZA7ssv3ZzqKzfWPARhQy/ypF
 GN72LObdxaW01GjN9bJ8x4KxBj+tIo2lLXYIK5TdKZy+LRxnsbCK6JGa5gFxopQh
 325SOqkLlhaS2P6A2nHC
 =TYNw
 -----END PGP SIGNATURE-----

Merge tag 'gpio-v4.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio

Pull GPIO updates from Linus Walleij:
 "This is the bulk of the GPIO changes for the v4.14 cycle.

  Not so much changes this time, phew. David Daney and Bartosz
  Golaszewski did all the really interesting work in infrastructure
  improvement across GPIO and IRQ core, hats off for them and to tglx
  and Marc Z for general help with these patch sets.

  Core changes:

   - Allow the GPIO irqchip to allocate IRQs dynamically. This is an
     important change on systems where only a restricted number of IRQs,
     lesser than the number of GPIO lines, can be utilized. Now we can
     allocate these on a first-come-first-served basis instead of
     hogging up valuable IRQ lines.

   - Serious fix-up of the kerneldoc documentation and inclusion into
     the kerneldoc builds.

   - Pulled in the IRQ simulator from the IRQ core tree and use this in
     the GPIO mockup driver for exhaustive testing of interrupt
     abilities.

  New drivers:

   - New driver for ThunderX and OCTEON-TX. This is especially
     interesting as it picks up improvements from the IRQ core that
     allow us to handle fasteoi ACKs upwards in a hierarchy when there
     are IRQ flag latches on several levels in a hierarchy. Very
     interesting work here.

   - New subdriver for Renesas R-Car r8a7745 (RZ/G1E).

  Misc:

   - Several fixes and improvements for Xilinx Zynq GPIO.

   - Support an enablement GPIO for the 74x164 GPIO.

   - Switch a bunch of chips to use devres to allocate irq descriptors.

   - A bunch of constification fixes"

* tag 'gpio-v4.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (63 commits)
  gpio: mockup: remove unused variable gc
  gpio: pl061: constify amba_id
  Revert "gpiolib: request the gpio before querying its direction"
  gpio: twl6040: remove unneeded forward declaration
  gpio: zevio: make gpio_chip const
  gpio: add gpio_add_lookup_tables() to add several tables at once
  gpio: rcar: Add r8a7745 (RZ/G1E) support
  gpio: brcmstb: check return value of gpiochip_irqchip_add()
  MAINTAINERS: Add entry for THUNDERX GPIO Driver.
  gpio: Add gpio driver support for ThunderX and OCTEON-TX
  gpio: mockup: use irq_sim
  gpio: mxs: use devres for irq generic chip
  gpio: mxc: use devres for irq generic chip
  gpio: pch: use devres for irq generic chip
  gpio: ml-ioh: use devres for irq generic chip
  gpio: sta2x11: use devres for irq generic chip
  gpio: sta2x11: disallow unbinding the driver
  gpio: mxs: disallow unbinding the driver
  gpio: mxc: disallow unbinding the driver
  gpio: aspeed: Remove reference to clock name in debounce warning message
  ...
 2017-09-05 11:49:48 -07:00
Linus Torvalds
d16605c912 This is the big bulk of pin control changes for the v4.14 kernel: 
Core changes:
 - Decision to wrap the sleep mode of the Spreadtrum and in the future
   others into a specially tagged state. The generic DT bindings and the
   new Spreadtrum driver conforms to this. Others should be moved over
   if possible.
 
 New drivers:
 - New driver for Spreadtrum SoCs especially the SC9860 SoC.
 - New driver for Storlink/Cortina Gemini 3512 and 3516 SoCs.
 
 New subdrivers:
 - Intel Denverton subdriver.
 - Intel Cannon Lake subdriver.
 - Intel Lewisburg subdriver.
 - Allwinner sunxi: R40 subdriver for A10.
 - Socionext uniphier PXs3 subdriver.
 - Rockchip RK3128 subdriver.
 - Renesas SH-PFC R8A77995 subdriver.
 
 Miscellaneous:
 - Qualcomm APQ8064 can handle general purpose clock muxing.
 - Mediatek MT7623 PCIe mux data fixed up.
 - Intel GPIO IRQs are disabled during suspend.
 - Several fixes and addtions to Renesas r8a7796.
 - Qualcomm SPMI GPIO supports dtest route and LV/MV subtype.
 - Input schmitt trigger support in Rockchip RV1108.
 - Aspeed G4 and G5 USB host/device pin control control added.
 - Qualcomm IPQ4019 has matured with a few missing pin groups and
   control bits put in place.
 - Lots of constification, this is the latest in cocinelle fixes.
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJZra4bAAoJEEEQszewGV1zB0QP/jdNE76rAfPA3FTf3xnWeOhe
 yVPGDC57M5vBkbHp2htgjpnzeaqYRPrLlmJK30pmyYWS/OivFtYcPuxthHX/m8dT
 0WzV9iJ6OntxAFSpzLmWtDc7Svrf30tyPTyMNmCd+0d/Dj8kIRYIsrvCAv0iGwlY
 UWeVxeBwKWKhxV4DbIuEXGEa9zcdsew++qkZjr+GvObtNLIqpQVyLZrKl18C0EAR
 CLSiRNzvlPrr/k2nETkJtYnlaMLl2aL0IAt7JzDtYDonFogQg7oSESehToSZmw99
 Cxo1FHCF4nyMpFBCdnirN2g07dNVLoTcXvKLSygaDorzwrE3uAaVqbWigBC2Rum6
 psvP3SHPudj+ysSzRjkoImuSTdyaQLFHVtGOcb+esM753y90fJ1Mycdf2UNbo2+Z
 NE8wt31iJIZ+/WTxIX692VOUdRivb8/MFsBBwyvGL/Fx3ylsvr34zaOeVlk3e0tO
 7JV3hRaWs+KgwYvesNSxwWPUF+tFHHakqs7OQnROlOIQBakZX3QYVYfc4jfJofUl
 2s0roBOjjKamnta9VphS6OO5EG7lmG41cI5q4uW3bIXdfP88kDATFqXvTkS4HZAw
 UO/LfP31m/1hr5oMYWDUEntzdQP+SE6N2/np6QOGykXNDGut2TxaV4WYkidCYawl
 /8/O1tCUr9xreTsRxWIv
 =GkNo
 -----END PGP SIGNATURE-----

Merge tag 'pinctrl-v4.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

Pull pin control updates from Linus Walleij:
 "This is the big bulk of pin control changes for the v4.14 kernel.
  There are just a few bigger changes (new drivers mostly) and then a
  lot of small patches all over the place.

  Core changes:
   - Decision to wrap the sleep mode of the Spreadtrum and in the future
     others into a specially tagged state. The generic DT bindings and
     the new Spreadtrum driver conforms to this. Others should be moved
     over if possible.

  New drivers:
   - Spreadtrum SoCs especially the SC9860 SoC.
   - Storlink/Cortina Gemini 3512 and 3516 SoCs.

  New subdrivers:
   - Intel Denverton subdriver.
   - Intel Cannon Lake subdriver.
   - Intel Lewisburg subdriver.
   - Allwinner sunxi: R40 subdriver for A10.
   - Socionext uniphier PXs3 subdriver.
   - Rockchip RK3128 subdriver.
   - Renesas SH-PFC R8A77995 subdriver.

  Miscellaneous:
   - Qualcomm APQ8064 can handle general purpose clock muxing.
   - Mediatek MT7623 PCIe mux data fixed up.
   - Intel GPIO IRQs are disabled during suspend.
   - Several fixes and addtions to Renesas r8a7796.
   - Qualcomm SPMI GPIO supports dtest route and LV/MV subtype.
   - Input schmitt trigger support in Rockchip RV1108.
   - Aspeed G4 and G5 USB host/device pin control control added.
   - Qualcomm IPQ4019 has matured with a few missing pin groups and
     control bits put in place.
   - Lots of constification, this is the latest in cocinelle fixes"

* tag 'pinctrl-v4.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (147 commits)
  Revert "pinctrl: sunxi: Don't enforce bias disable (for now)"
  pinctrl: uniphier: fix members of rmii group for Pro4
  pinctrl: Delete an error message
  pinctrl: core: Delete an error message
  pinctrl: intel: Read back TX buffer state
  pinctrl: rockchip: Add rv1108 recalculated iomux support
  pinctrl: intel: Decrease indentation in intel_gpio_set()
  pinctrl: rza1: Remove suffix from gpiochip label
  pinctrl: qcom: spmi-gpio: Correct power_source range check
  pinctrl: freescale: make mxs_regs const
  pinctrl: aspeed: Rework strap register write logic for the AST2500
  pinctrl: rza1: off by one in rza1_parse_gpiochip()
  pinctrl: qcom: General Purpose clocks for apq8064
  pinctrl: sprd: Add Spreadtrum pin control driver
  dt-bindings: pinctrl: Add DT bindings for Spreadtrum SC9860
  pinctrl: Add sleep related state to indicate sleep related configs
  pinctrl: mediatek: update PCIe mux data for MT7623
  pinctrl: intel: Add Intel Lewisburg GPIO support
  pinctrl: intel: Add Intel Cannon Lake PCH-H pin controller support
  pinctrl: aspeed: Fix ast2500 strap register write logic
  ...
 2017-09-05 11:45:33 -07:00
Linus Torvalds
fe9e31383e regulator: Updates for v4.14 
This is an extremely quiet release for the regulator subsystem, it's all
 fairly minor fixes and cleanups plus a few new drivers and ddevice ID
 additions:
 
  - Support for MediaTek MT6380, Ricoh RC5T619 and ST Voltage Reference
    Buffers.
 -----BEGIN PGP SIGNATURE-----
 
 iQFHBAABCAAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAlmthW0THGJyb29uaWVA
 a2VybmVsLm9yZwAKCRAk1otyXVSH0BhAB/4/twIBnHSwqyNgt/HX8N0gdalejYIY
 lrCushBDAEp3CAV/ODfjCQlL2V2DOA5scx9iQxiiri6owbGcpdB7mNDMfyR9tT2f
 hkUPEMK6gyCHQdKubmnpFXKBrmPXo6wYrPGYx8HWHYCSiL3lTQPwd+n1iKt4NsLT
 mQRzjXqFahKS/UKqPcur+wP1gpVGY5DUifDjSiNTQzenM4EY/Yu0DzTohAta5qb7
 8bR+teC90I2u7VBQUnslNdVm1y8CtSyUVAOP2aOkTVu/8h/r9DDL1EL6w3efScna
 60FZGcsnqVuEjUsF/5PtKes/9QD+/MS1qTKBK5eo+UzcbqQfhpZgBo4d
 =EUUb
 -----END PGP SIGNATURE-----

Merge tag 'regulator-v4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator

Pull regulator updates from Mark Brown:
 "This is an extremely quiet release for the regulator subsystem, it's
  all fairly minor fixes and cleanups plus a few new drivers and ddevice
  ID additions:

   - Support for MediaTek MT6380, Ricoh RC5T619 and ST Voltage Reference
     Buffers"

* tag 'regulator-v4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (24 commits)
  regulator: Add support for stm32-vrefbuf
  regulator: Add STM32 Voltage Reference Buffer
  regulator: pv88090: Exception handling for out of bounds
  regulator: da9063: Return an error code on probe failure
  regulator: rn5t618: add RC5T619 PMIC support
  regulator: ltc3589: constify i2c_device_id
  regulator: fan53555: fix I2C device ids
  regulator: add fixes with MT6397 dt-bindings shouldn't reference driver
  regulator: add fixes with MT6323 dt-bindings shouldn't reference driver
  regulator: add fixes with MT6311 dt-bindings shouldn't reference driver
  regulator: Add document for MediaTek MT6380 regulator
  regulator: mt6380: Add support for MT6380
  regulator: pwm-regulator: Remove unneeded gpiod NULL check
  regulator: core: fix a possible race in disable_work handling
  regulator: fan53555: Use of_device_get_match_data() to simplify probe
  regulator: of: regulator_of_get_init_data() missing of_node_get()
  regulator: pwm-regulator: fix example syntax
  regulator: Convert to using %pOF instead of full_name
  regulator: cpcap: Add OF mode mapping
  regulator: cpcap: Fix standby mode
  ...
 2017-09-05 11:43:30 -07:00
Linus Torvalds
16a832a21f * pnd2_edac: A minimal sideband driver (Tony Luck) 
* small-ish cleanups and fixes all over the place.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAlmtYQoACgkQEsHwGGHe
 VUq14w//V+yaHVLh6Me6zHxUeJO4o+dTWw56cSNRRNDUTZXJAEsi0GaKZ0YvLT6m
 M34KgYLGXFOMY3T3v3SM88xKW5dmTV8okKiuAMSxeiyOyL3TIiT32uDKiYwekD2t
 3pJ6KuTXHCpEYnchI9mPP1ccohxHt/QOi+nt0wbuZnsOAAwUToI4+fOvmjQPgACS
 Hg47pKoSU9j7DDbTDtisKVMNJGkL7wdwuA0XtB8eww1pYaPocIv8WO0mUbEUQ/bD
 W5O+rLbwVNHcwU4vI4e+YPXpk1FJke7qCabje1h50yzRFoK3EQP65cGoIX/fxKDt
 9tsiKQSV/Y0fXntcXtJuwYN2z1ykzk7o4LLVkhX255JqtwFYxLgf1a0e3ZLV7mvC
 p+yB9moWis/zpfdAuazoKT5R3W1Gl/CpjvYv34lSJUipR10OLvNGKtg6CAlBfhbw
 CEfzIX/3mQ+XSyOS3ofESbVNMjOY6CfQMgT+0sTKz5q7/gDLinGuh+J/zS5ze/lv
 FugGn2PeovfIVo0OLU1dSyHKHE6enDIkHvS0rcGXBks88lARQlHAQuMlR37itmd5
 KfW/a/W4rui4io80E2xlBFkamShTZe/Kx2Z9q9OMc0ut7zcPfREqB4Gg+lUGGOaL
 1cA76rZ3d9A6Yy8ARlCVa0Q9AFyMsjDstLE3iG5wrQLMfHA93pI=
 =gR6C
 -----END PGP SIGNATURE-----

Merge tag 'edac_for_4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp

Pull EDAC updates from Borislav Petkov:

 - pnd2_edac: A minimal sideband driver (Tony Luck)

 - small-ish cleanups and fixes all over the place

* tag 'edac_for_4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp:
  EDAC, mce_amd: Get rid of local var in amd_filter_mce()
  EDAC, mce_amd: Get rid of most struct cpuinfo_x86 uses
  EDAC, mce_amd: Rename decode_smca_errors() to decode_smca_error()
  EDAC: Make device_type const
  EDAC, pnd2: Properly toggle hidden state for P2SB PCI device
  EDAC, pnd2: Conditionally unhide/hide the P2SB PCI device to read BAR
  EDAC, pnd2: Mask off the lower four bits of a BAR
  EDAC, thunderx: Fix error handling path in thunderx_lmc_probe()
  EDAC, altera: Fix error handling path in altr_edac_device_probe()
  EDAC, pnd2: Build in a minimal sideband driver for Apollo Lake
  EDAC, sb_edac: Classify memory mirroring modes
  EDAC, cpc925, ppc4xx: Convert to using %pOF instead of full_name
  EDAC: Get rid of mci->mod_ver
  EDAC: Constify attribute_group structures
  EDAC, mce_amd: Use cpu_to_node() to find the node ID
 2017-09-05 11:35:16 -07:00
Linus Torvalds
bafb0762cb Char/Misc drivers for 4.14-rc1 
Here is the big char/misc driver update for 4.14-rc1.
 
 Lots of different stuff in here, it's been an active development cycle
 for some reason.  Highlights are:
   - updated binder driver, this brings binder up to date with what
     shipped in the Android O release, plus some more changes that
     happened since then that are in the Android development trees.
   - coresight updates and fixes
   - mux driver file renames to be a bit "nicer"
   - intel_th driver updates
   - normal set of hyper-v updates and changes
   - small fpga subsystem and driver updates
   - lots of const code changes all over the driver trees
   - extcon driver updates
   - fmc driver subsystem upadates
   - w1 subsystem minor reworks and new features and drivers added
   - spmi driver updates
 
 Plus a smattering of other minor driver updates and fixes.
 
 All of these have been in linux-next with no reported issues for a
 while.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWa1+Ew8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+yl26wCgquufNylfhxr65NbJrovduJYzRnUAniCivXg8
 bePIh/JI5WxWoHK+wEbY
 =hYWx
 -----END PGP SIGNATURE-----

Merge tag 'char-misc-4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char/misc driver updates from Greg KH:
 "Here is the big char/misc driver update for 4.14-rc1.

  Lots of different stuff in here, it's been an active development cycle
  for some reason. Highlights are:

   - updated binder driver, this brings binder up to date with what
     shipped in the Android O release, plus some more changes that
     happened since then that are in the Android development trees.

   - coresight updates and fixes

   - mux driver file renames to be a bit "nicer"

   - intel_th driver updates

   - normal set of hyper-v updates and changes

   - small fpga subsystem and driver updates

   - lots of const code changes all over the driver trees

   - extcon driver updates

   - fmc driver subsystem upadates

   - w1 subsystem minor reworks and new features and drivers added

   - spmi driver updates

  Plus a smattering of other minor driver updates and fixes.

  All of these have been in linux-next with no reported issues for a
  while"

* tag 'char-misc-4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (244 commits)
  ANDROID: binder: don't queue async transactions to thread.
  ANDROID: binder: don't enqueue death notifications to thread todo.
  ANDROID: binder: Don't BUG_ON(!spin_is_locked()).
  ANDROID: binder: Add BINDER_GET_NODE_DEBUG_INFO ioctl
  ANDROID: binder: push new transactions to waiting threads.
  ANDROID: binder: remove proc waitqueue
  android: binder: Add page usage in binder stats
  android: binder: fixup crash introduced by moving buffer hdr
  drivers: w1: add hwmon temp support for w1_therm
  drivers: w1: refactor w1_slave_show to make the temp reading functionality separate
  drivers: w1: add hwmon support structures
  eeprom: idt_89hpesx: Support both ACPI and OF probing
  mcb: Fix an error handling path in 'chameleon_parse_cells()'
  MCB: add support for SC31 to mcb-lpc
  mux: make device_type const
  char: virtio: constify attribute_group structures.
  Documentation/ABI: document the nvmem sysfs files
  lkdtm: fix spelling mistake: "incremeted" -> "incremented"
  perf: cs-etm: Fix ETMv4 CONFIGR entry in perf.data file
  nvmem: include linux/err.h from header
  ...
 2017-09-05 11:08:17 -07:00
Linus Torvalds
44b1671fae Driver core update for 4.14-rc1 
Here is the "big" driver core update for 4.14-rc1.
 
 It's really not all that big, the largest thing here being some firmware
 tests to help ensure that that crazy api is working properly.
 
 There's also a new uevent for when a driver is bound or unbound from a
 device, fixing a hole in the driver model that's been there since the
 very beginning.  Many thanks to Dmitry for being persistent and pointing
 out how wrong I was about this all along :)
 
 Patches for the new uevents are already in the systemd tree, if people
 want to play around with them.
 
 Otherwise just a number of other small api changes and updates here,
 nothing major.  All of these patches have been in linux-next for a
 while with no reported issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWa1/IQ8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+yn8jACfdQg+YXGxTExonxnyiWgoDMMSO2gAn1ETOaak
 itLO5ll4b6EQ0r3pU27d
 =pCYl
 -----END PGP SIGNATURE-----

Merge tag 'driver-core-4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core update from Greg KH:
 "Here is the "big" driver core update for 4.14-rc1.

  It's really not all that big, the largest thing here being some
  firmware tests to help ensure that that crazy api is working properly.

  There's also a new uevent for when a driver is bound or unbound from a
  device, fixing a hole in the driver model that's been there since the
  very beginning. Many thanks to Dmitry for being persistent and
  pointing out how wrong I was about this all along :)

  Patches for the new uevents are already in the systemd tree, if people
  want to play around with them.

  Otherwise just a number of other small api changes and updates here,
  nothing major. All of these patches have been in linux-next for a
  while with no reported issues"

* tag 'driver-core-4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (28 commits)
  driver core: bus: Fix a potential double free
  Do not disable driver and bus shutdown hook when class shutdown hook is set.
  base: topology: constify attribute_group structures.
  base: Convert to using %pOF instead of full_name
  kernfs: Clarify lockdep name for kn->count
  fbdev: uvesafb: remove DRIVER_ATTR() usage
  xen: xen-pciback: remove DRIVER_ATTR() usage
  driver core: Document struct device:dma_ops
  mod_devicetable: Remove excess description from structured comment
  test_firmware: add batched firmware tests
  firmware: enable a debug print for batched requests
  firmware: define pr_fmt
  firmware: send -EINTR on signal abort on fallback mechanism
  test_firmware: add test case for SIGCHLD on sync fallback
  initcall_debug: add deferred probe times
  Input: axp20x-pek - switch to using devm_device_add_group()
  Input: synaptics_rmi4 - use devm_device_add_group() for attributes in F01
  Input: gpio_keys - use devm_device_add_group() for attributes
  driver core: add devm_device_add_group() and friends
  driver core: add device_{add|remove}_group() helpers
  ...
 2017-09-05 10:41:21 -07:00
Linus Torvalds
bf1d6b2c76 Staging/IIO driver updates for 4.14-rc1 
Here is the big staging and IIO driver update for 4.14-rc1.
 
 Lots of staging driver fixes and cleanups, including some reorginizing
 of the lustre header files to try to impose some sanity on what is, and
 what is not, the uapi for that filesystem.
 
 There are some tty core changes in here as well, as the speakup drivers
 need them, and that's ok with me, they are sane and the speakup code is
 getting nicer because of it.
 
 There is also the addition of the obiligatory new wifi driver, just
 because it has been a release or two since we added our last one...
 
 Other than that, lots and lots of small coding style fixes, as usual.
 
 All of these have been in linux-next for a while with no reported
 issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWa2AbA8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ymboACfUsNhw+cJlVb25J70NULkye3y1PAAoJ+Ayq30
 ckkLGakZayKcYEx50ffH
 =KJwg
 -----END PGP SIGNATURE-----

Merge tag 'staging-4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging

Pull staging/IIO driver updates from Greg KH:
 "Here is the big staging and IIO driver update for 4.14-rc1.

  Lots of staging driver fixes and cleanups, including some reorginizing
  of the lustre header files to try to impose some sanity on what is,
  and what is not, the uapi for that filesystem.

  There are some tty core changes in here as well, as the speakup
  drivers need them, and that's ok with me, they are sane and the
  speakup code is getting nicer because of it.

  There is also the addition of the obiligatory new wifi driver, just
  because it has been a release or two since we added our last one...

  Other than that, lots and lots of small coding style fixes, as usual.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'staging-4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (612 commits)
  staging:rtl8188eu:core Fix remove unneccessary else block
  staging: typec: fusb302: make structure fusb302_psy_desc static
  staging: unisys: visorbus: make two functions static
  staging: fsl-dpaa2/eth: fix off-by-one FD ctrl bitmaks
  staging: r8822be: Simplify deinit_priv()
  staging: r8822be: Remove some dead code
  staging: vboxvideo: Use CONFIG_DRM_KMS_FB_HELPER to check for fbdefio availability
  staging:rtl8188eu Fix comparison to NULL
  staging: rts5208: rename mmc_ddr_tunning_rx_cmd to mmc_ddr_tuning_rx_cmd
  Staging: Pi433: style fix - tabs and spaces
  staging: pi433: fix spelling mistake: "preample" -> "preamble"
  staging:rtl8188eu:core Fix Code Indent
  staging: typec: fusb302: Export current-limit through a power_supply class dev
  staging: typec: fusb302: Add support for USB2 charger detection through extcon
  staging: typec: fusb302: Use client->irq as irq if set
  staging: typec: fusb302: Get max snk mv/ma/mw from device-properties
  staging: typec: fusb302: Set max supply voltage to 5V
  staging: typec: tcpm: Add get_current_limit tcpc_dev callback
  staging:rtl8188eu Use __func__ instead of function name
  staging: lustre: coding style fixes found by checkpatch.pl
  ...
 2017-09-05 10:36:26 -07:00
Linus Torvalds
e63a94f12b TTY/Serial updates for 4.14-rc1 
Here is the big tty/serial driver update for 4.14-rc1.
 
 Well, not all that big, just a number of small serial driver fixes, and
 a new serial driver.  Also in here are some much needed goldfish tty
 driver (emulator) fixes to try to get that codebase under control.
 
 All of these have been in linux-next for a while with no reported
 issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWa2A+A8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ylNKACfWOuWb4PEGzPg2hF57V1g0cq8VXEAn0BtZT+n
 uuCBV53ylesoHhEhKf/D
 =g+za
 -----END PGP SIGNATURE-----

Merge tag 'tty-4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

Pull tty/serial updates from Greg KH:
 "Here is the big tty/serial driver update for 4.14-rc1.

  Well, not all that big, just a number of small serial driver fixes,
  and a new serial driver. Also in here are some much needed goldfish
  tty driver (emulator) fixes to try to get that codebase under control.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'tty-4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (94 commits)
  tty: goldfish: Implement support for kernel 'earlycon' parameter
  tty: goldfish: Use streaming DMA for r/w operations on Ranchu platforms
  tty: goldfish: Refactor constants to better reflect their nature
  serial: 8250_port: Remove useless NULL checks
  earlycon: initialise baud field of earlycon device structure
  tty: hvcs: make ktermios const
  pty: show associative slave of ptmx in fdinfo
  tty: n_gsm: Add compat_ioctl
  tty: hvcs: constify vio_device_id
  tty: hvc_vio: constify vio_device_id
  tty: mips_ejtag_fdc: constify mips_cdmm_device_id
  Introduce 8250_men_mcb
  mcb: introduce mcb_get_resource()
  serial: imx: Avoid post-PIO cleanup if TX DMA is started
  tty: serial: imx: disable irq after suspend
  serial: 8250_uniphier: add suspend/resume support
  serial: 8250_uniphier: use CHAR register for canary to detect power-off
  serial: 8250_uniphier: fix serial port index in private data
  serial: 8250: of: Add new port type for MediaTek BTIF controller on MT7622/23 SoC
  dt-bindings: serial: 8250: Add MediaTek BTIF controller bindings
  ...
 2017-09-05 10:30:48 -07:00
Linus Torvalds
1a3b85ea36 USB/PHY driver updates for 4.14-rc1 
Here is the large USB and PHY driver update for 4.14-rc1.
 
 Not all that exciting, a few new PHY drivers, the usual mess of gadget
 driver updates and fixes, and of course, xhci updates to try to tame
 that beast.
 
 A number of usb-serial updates and other small fixes all over the USB
 driver tree are in here as well.  Full details are in the shortlog.
 
 All of these have been in linux-next for a while with no reported
 issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWa2Buw8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+yk0VQCeK9SbD3sNVE0NXnwBYPTptghtr1EAoKwg96LG
 e4TUNAUcKadcDHJ8S81i
 =zy8S
 -----END PGP SIGNATURE-----

Merge tag 'usb-4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB/PHY driver updates from Greg KH:
 "Here is the large USB and PHY driver update for 4.14-rc1.

  Not all that exciting, a few new PHY drivers, the usual mess of gadget
  driver updates and fixes, and of course, xhci updates to try to tame
  that beast.

  A number of usb-serial updates and other small fixes all over the USB
  driver tree are in here as well. Full details are in the shortlog.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'usb-4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (171 commits)
  usbip: vhci-hcd: make vhci_hc_driver const
  usb: phy: Avoid unchecked dereference warning
  usb: imx21-hcd: make imx21_hc_driver const
  usb: host: make ehci_fsl_overrides const and __initconst
  dt-bindings: mt8173-mtu3: add generic compatible and rename file
  dt-bindings: mt8173-xhci: add generic compatible and rename file
  usb: xhci-mtk: add generic compatible string
  usbip: auto retry for concurrent attach
  USB: serial: option: simplify 3 D-Link device entries
  USB: serial: option: add support for D-Link DWM-157 C1
  usb: core: usbport: fix "BUG: key not in .data" when lockdep is enabled
  usb: chipidea: usb2: check memory allocation failure
  usb: Add device quirk for Logitech HD Pro Webcam C920-C
  usb: misc: lvstest: add entry to place port in compliance mode
  usb: xhci: Support enabling of compliance mode for xhci 1.1
  usb:xhci:Fix regression when ATI chipsets detected
  usb: quirks: add delay init quirk for Corsair Strafe RGB keyboard
  usb: gadget: make snd_pcm_hardware const
  usb: common: use of_property_read_bool()
  USB: core: constify vm_operations_struct
  ...
 2017-09-05 10:26:01 -07:00
Linus Torvalds
04759194dc arm64 updates for 4.14: 
- VMAP_STACK support, allowing the kernel stacks to be allocated in
   the vmalloc space with a guard page for trapping stack overflows. One
   of the patches introduces THREAD_ALIGN and changes the generic
   alloc_thread_stack_node() to use this instead of THREAD_SIZE (no
   functional change for other architectures)
 
 - Contiguous PTE hugetlb support re-enabled (after being reverted a
   couple of times). We now have the semantics agreed in the generic mm
   layer together with API improvements so that the architecture code can
   detect between contiguous and non-contiguous huge PTEs
 
 - Initial support for persistent memory on ARM: DC CVAP instruction
   exposed to user space (HWCAP) and the in-kernel pmem API implemented
 
 - raid6 improvements for arm64: faster algorithm for the delta syndrome
   and implementation of the recovery routines using Neon
 
 - FP/SIMD refactoring and removal of support for Neon in interrupt
   context. This is in preparation for full SVE support
 
 - PTE accessors converted from inline asm to cmpxchg so that we can
   use LSE atomics if available (ARMv8.1)
 
 - Perf support for Cortex-A35 and A73
 
 - Non-urgent fixes and cleanups
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEE5RElWfyWxS+3PLO2a9axLQDIXvEFAlmuunYACgkQa9axLQDI
 XvEH9BAAo8V94GOMkX6HkT+2hjkl7DQ9krjumzmfzLV5AdgHMMzBNozmWKOCzgh0
 yaxRcTUju3EyNeKhADr7yLiKDH8fnRPmYEJiVrwfgo7MaPApaCorr7LLIXfPGuxe
 DTBHw+oxRMjlmaHeATX4PBWfQxAx+vjjhHqv3Qpmvdm4nYqR+0hZomH2BNsu64fk
 AkSeUCxfCEyzSFIKuQM04M4zhSSZHz1tDxWI0b0RcK73qqEOuYZNkn6qxSKP5J4X
 b2Y2U8nmxJ5C2fXpDYZaK9shiJ4Vu7X3Ocf/M7hsJzGY5z4dhnmUmxpHROaNiSvo
 hCx7POYKyAPovps7zMSqcdsujkqOIQO8RHp4zGXx/pIr1RumjIiCY+RGpUYGibvU
 N4Px5hZNneuHaPZZ+sWjOOdNB28xyzeUp2UK9Bb6uHB+/3xssMAD8Fd/b2ZLnS6a
 YW3wrZmqA+ckfETsSRibabTs/ayqYHs2SDVwnlDJGtn+4Pw8oQpwGrwokxLQuuw3
 uF2sNEPhJz+dcy21q3udYAQE1qOJBlLqTptgP96CHoVqh8X6nYSi5obT7y30ln3n
 dhpZGOdi6R8YOouxgXS3Wg07pxn444L/VzDw5ku/5DkdryPOZCSRbk/2t8If6oDM
 2VD6PCbTx3hsGc7SZ7FdSwIysD2j446u40OMGdH2iLB5jWBwyOM=
 =vd0/
 -----END PGP SIGNATURE-----

Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux

Pull arm64 updates from Catalin Marinas:

 - VMAP_STACK support, allowing the kernel stacks to be allocated in the
   vmalloc space with a guard page for trapping stack overflows. One of
   the patches introduces THREAD_ALIGN and changes the generic
   alloc_thread_stack_node() to use this instead of THREAD_SIZE (no
   functional change for other architectures)

 - Contiguous PTE hugetlb support re-enabled (after being reverted a
   couple of times). We now have the semantics agreed in the generic mm
   layer together with API improvements so that the architecture code
   can detect between contiguous and non-contiguous huge PTEs

 - Initial support for persistent memory on ARM: DC CVAP instruction
   exposed to user space (HWCAP) and the in-kernel pmem API implemented

 - raid6 improvements for arm64: faster algorithm for the delta syndrome
   and implementation of the recovery routines using Neon

 - FP/SIMD refactoring and removal of support for Neon in interrupt
   context. This is in preparation for full SVE support

 - PTE accessors converted from inline asm to cmpxchg so that we can use
   LSE atomics if available (ARMv8.1)

 - Perf support for Cortex-A35 and A73

 - Non-urgent fixes and cleanups

* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (75 commits)
  arm64: cleanup {COMPAT_,}SET_PERSONALITY() macro
  arm64: introduce separated bits for mm_context_t flags
  arm64: hugetlb: Cleanup setup_hugepagesz
  arm64: Re-enable support for contiguous hugepages
  arm64: hugetlb: Override set_huge_swap_pte_at() to support contiguous hugepages
  arm64: hugetlb: Override huge_pte_clear() to support contiguous hugepages
  arm64: hugetlb: Handle swap entries in huge_pte_offset() for contiguous hugepages
  arm64: hugetlb: Add break-before-make logic for contiguous entries
  arm64: hugetlb: Spring clean huge pte accessors
  arm64: hugetlb: Introduce pte_pgprot helper
  arm64: hugetlb: set_huge_pte_at Add WARN_ON on !pte_present
  arm64: kexec: have own crash_smp_send_stop() for crash dump for nonpanic cores
  arm64: dma-mapping: Mark atomic_pool as __ro_after_init
  arm64: dma-mapping: Do not pass data to gen_pool_set_algo()
  arm64: Remove the !CONFIG_ARM64_HW_AFDBM alternative code paths
  arm64: Ignore hardware dirty bit updates in ptep_set_wrprotect()
  arm64: Move PTE_RDONLY bit handling out of set_pte_at()
  kvm: arm64: Convert kvm_set_s2pte_readonly() from inline asm to cmpxchg()
  arm64: Convert pte handling from inline asm to using (cmp)xchg
  arm64: neon/efi: Make EFI fpsimd save/restore variables static
  ...
 2017-09-05 09:53:37 -07:00
Jiri Kosina
de6c5070ad Merge branch 'for-4.14/wacom' into for-linus 
- name generation improvement for Wacom devices from Jason Gerecke
- Kconfig dependency fix for Wacom driver from Arnd Bergmann
 2017-09-05 11:14:10 +02:00
Jiri Kosina
38e50c9ba8 Merge branch 'for-4.14/multitouch' into for-linus 
- support for media keys on Asus T304UA from João Paulo Rechi Vita
- support for Microsoft Win8 Wireless Radio Controls extensions
  from João Paulo Rechi Vita

Conflicts:
	drivers/hid/hid-ids.h

Signed-off-by: Jiri Kosina <jkosina@suse.cz>
 2017-09-05 11:11:52 +02:00
Jiri Kosina
2682b89236 Merge branch 'for-4.14/driver-lock-removal' into for-linus 
- Arnd pointed out that driver_lock semaphore is superfluous, as
  driver core already provides all the necessary concurency protection.
  Removal patch from Binoy Jayan
 2017-09-05 11:08:52 +02:00
Linus Torvalds
f57091767a Merge branch 'x86-cache-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip 
Pull x86 cache quality monitoring update from Thomas Gleixner:
 "This update provides a complete rewrite of the Cache Quality
  Monitoring (CQM) facility.

  The existing CQM support was duct taped into perf with a lot of issues
  and the attempts to fix those turned out to be incomplete and
  horrible.

  After lengthy discussions it was decided to integrate the CQM support
  into the Resource Director Technology (RDT) facility, which is the
  obvious choise as in hardware CQM is part of RDT. This allowed to add
  Memory Bandwidth Monitoring support on top.

  As a result the mechanisms for allocating cache/memory bandwidth and
  the corresponding monitoring mechanisms are integrated into a single
  management facility with a consistent user interface"

* 'x86-cache-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (37 commits)
  x86/intel_rdt: Turn off most RDT features on Skylake
  x86/intel_rdt: Add command line options for resource director technology
  x86/intel_rdt: Move special case code for Haswell to a quirk function
  x86/intel_rdt: Remove redundant ternary operator on return
  x86/intel_rdt/cqm: Improve limbo list processing
  x86/intel_rdt/mbm: Fix MBM overflow handler during CPU hotplug
  x86/intel_rdt: Modify the intel_pqr_state for better performance
  x86/intel_rdt/cqm: Clear the default RMID during hotcpu
  x86/intel_rdt: Show bitmask of shareable resource with other executing units
  x86/intel_rdt/mbm: Handle counter overflow
  x86/intel_rdt/mbm: Add mbm counter initialization
  x86/intel_rdt/mbm: Basic counting of MBM events (total and local)
  x86/intel_rdt/cqm: Add CPU hotplug support
  x86/intel_rdt/cqm: Add sched_in support
  x86/intel_rdt: Introduce rdt_enable_key for scheduling
  x86/intel_rdt/cqm: Add mount,umount support
  x86/intel_rdt/cqm: Add rmdir support
  x86/intel_rdt: Separate the ctrl bits from rmdir
  x86/intel_rdt/cqm: Add mon_data
  x86/intel_rdt: Prepare for RDT monitor data support
  ...
 2017-09-04 13:56:37 -07:00
Linus Torvalds
93cc1228b4 Merge branch 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip 
Pull irq updates from Thomas Gleixner:
 "The interrupt subsystem delivers this time:

   - Refactoring of the GIC-V3 driver to prepare for the GIC-V4 support

   - Initial GIC-V4 support

   - Consolidation of the FSL MSI support

   - Utilize the effective affinity interface in various ARM irqchip
     drivers

   - Yet another interrupt chip driver (UniPhier AIDET)

   - Bulk conversion of the irq chip driver to use %pOF

   - The usual small fixes and improvements all over the place"

* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (77 commits)
  irqchip/ls-scfg-msi: Add MSI affinity support
  irqchip/ls-scfg-msi: Add LS1043a v1.1 MSI support
  irqchip/ls-scfg-msi: Add LS1046a MSI support
  arm64: dts: ls1046a: Add MSI dts node
  arm64: dts: ls1043a: Share all MSIs
  arm: dts: ls1021a: Share all MSIs
  arm64: dts: ls1043a: Fix typo of MSI compatible string
  arm: dts: ls1021a: Fix typo of MSI compatible string
  irqchip/ls-scfg-msi: Fix typo of MSI compatible strings
  irqchip/irq-bcm7120-l2: Use correct I/O accessors for irq_fwd_mask
  irqchip/mmp: Make mmp_intc_conf const
  irqchip/gic: Make irq_chip const
  irqchip/gic-v3: Advertise GICv4 support to KVM
  irqchip/gic-v4: Enable low-level GICv4 operations
  irqchip/gic-v4: Add some basic documentation
  irqchip/gic-v4: Add VLPI configuration interface
  irqchip/gic-v4: Add VPE command interface
  irqchip/gic-v4: Add per-VM VPE domain creation
  irqchip/gic-v3-its: Set implementation defined bit to enable VLPIs
  irqchip/gic-v3-its: Allow doorbell interrupts to be injected/cleared
  ...
 2017-09-04 13:08:27 -07:00
Linus Torvalds
b1b6f83ac9 Merge branch 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip 
Pull x86 mm changes from Ingo Molnar:
 "PCID support, 5-level paging support, Secure Memory Encryption support

  The main changes in this cycle are support for three new, complex
  hardware features of x86 CPUs:

   - Add 5-level paging support, which is a new hardware feature on
     upcoming Intel CPUs allowing up to 128 PB of virtual address space
     and 4 PB of physical RAM space - a 512-fold increase over the old
     limits. (Supercomputers of the future forecasting hurricanes on an
     ever warming planet can certainly make good use of more RAM.)

     Many of the necessary changes went upstream in previous cycles,
     v4.14 is the first kernel that can enable 5-level paging.

     This feature is activated via CONFIG_X86_5LEVEL=y - disabled by
     default.

     (By Kirill A. Shutemov)

   - Add 'encrypted memory' support, which is a new hardware feature on
     upcoming AMD CPUs ('Secure Memory Encryption', SME) allowing system
     RAM to be encrypted and decrypted (mostly) transparently by the
     CPU, with a little help from the kernel to transition to/from
     encrypted RAM. Such RAM should be more secure against various
     attacks like RAM access via the memory bus and should make the
     radio signature of memory bus traffic harder to intercept (and
     decrypt) as well.

     This feature is activated via CONFIG_AMD_MEM_ENCRYPT=y - disabled
     by default.

     (By Tom Lendacky)

   - Enable PCID optimized TLB flushing on newer Intel CPUs: PCID is a
     hardware feature that attaches an address space tag to TLB entries
     and thus allows to skip TLB flushing in many cases, even if we
     switch mm's.

     (By Andy Lutomirski)

  All three of these features were in the works for a long time, and
  it's coincidence of the three independent development paths that they
  are all enabled in v4.14 at once"

* 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (65 commits)
  x86/mm: Enable RCU based page table freeing (CONFIG_HAVE_RCU_TABLE_FREE=y)
  x86/mm: Use pr_cont() in dump_pagetable()
  x86/mm: Fix SME encryption stack ptr handling
  kvm/x86: Avoid clearing the C-bit in rsvd_bits()
  x86/CPU: Align CR3 defines
  x86/mm, mm/hwpoison: Clear PRESENT bit for kernel 1:1 mappings of poison pages
  acpi, x86/mm: Remove encryption mask from ACPI page protection type
  x86/mm, kexec: Fix memory corruption with SME on successive kexecs
  x86/mm/pkeys: Fix typo in Documentation/x86/protection-keys.txt
  x86/mm/dump_pagetables: Speed up page tables dump for CONFIG_KASAN=y
  x86/mm: Implement PCID based optimization: try to preserve old TLB entries using PCID
  x86: Enable 5-level paging support via CONFIG_X86_5LEVEL=y
  x86/mm: Allow userspace have mappings above 47-bit
  x86/mm: Prepare to expose larger address space to userspace
  x86/mpx: Do not allow MPX if we have mappings above 47-bit
  x86/mm: Rename tasksize_32bit/64bit to task_size_32bit/64bit()
  x86/xen: Redefine XEN_ELFNOTE_INIT_P2M using PUD_SIZE * PTRS_PER_PUD
  x86/mm/dump_pagetables: Fix printout of p4d level
  x86/mm/dump_pagetables: Generalize address normalization
  x86/boot: Fix memremap() related build failure
  ...
 2017-09-04 12:21:28 -07:00
Linus Torvalds
5f82e71a00 Merge branch 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip 
Pull locking updates from Ingo Molnar:

 - Add 'cross-release' support to lockdep, which allows APIs like
   completions, where it's not the 'owner' who releases the lock, to be
   tracked. It's all activated automatically under
   CONFIG_PROVE_LOCKING=y.

 - Clean up (restructure) the x86 atomics op implementation to be more
   readable, in preparation of KASAN annotations. (Dmitry Vyukov)

 - Fix static keys (Paolo Bonzini)

 - Add killable versions of down_read() et al (Kirill Tkhai)

 - Rework and fix jump_label locking (Marc Zyngier, Paolo Bonzini)

 - Rework (and fix) tlb_flush_pending() barriers (Peter Zijlstra)

 - Remove smp_mb__before_spinlock() and convert its usages, introduce
   smp_mb__after_spinlock() (Peter Zijlstra)

* 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (56 commits)
  locking/lockdep/selftests: Fix mixed read-write ABBA tests
  sched/completion: Avoid unnecessary stack allocation for COMPLETION_INITIALIZER_ONSTACK()
  acpi/nfit: Fix COMPLETION_INITIALIZER_ONSTACK() abuse
  locking/pvqspinlock: Relax cmpxchg's to improve performance on some architectures
  smp: Avoid using two cache lines for struct call_single_data
  locking/lockdep: Untangle xhlock history save/restore from task independence
  locking/refcounts, x86/asm: Disable CONFIG_ARCH_HAS_REFCOUNT for the time being
  futex: Remove duplicated code and fix undefined behaviour
  Documentation/locking/atomic: Finish the document...
  locking/lockdep: Fix workqueue crossrelease annotation
  workqueue/lockdep: 'Fix' flush_work() annotation
  locking/lockdep/selftests: Add mixed read-write ABBA tests
  mm, locking/barriers: Clarify tlb_flush_pending() barriers
  locking/lockdep: Make CONFIG_LOCKDEP_CROSSRELEASE and CONFIG_LOCKDEP_COMPLETIONS truly non-interactive
  locking/lockdep: Explicitly initialize wq_barrier::done::map
  locking/lockdep: Rename CONFIG_LOCKDEP_COMPLETE to CONFIG_LOCKDEP_COMPLETIONS
  locking/lockdep: Reword title of LOCKDEP_CROSSRELEASE config
  locking/lockdep: Make CONFIG_LOCKDEP_CROSSRELEASE part of CONFIG_PROVE_LOCKING
  locking/refcounts, x86/asm: Implement fast refcount overflow protection
  locking/lockdep: Fix the rollback and overwrite detection logic in crossrelease
  ...
 2017-09-04 11:52:29 -07:00
Linus Torvalds
6c51e67b64 Merge branch 'x86-syscall-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip 
Pull syscall updates from Ingo Molnar:
 "Improve the security of set_fs(): we now check the address limit on a
  number of key platforms (x86, arm, arm64) before returning to
  user-space - without adding overhead to the typical system call fast
  path"

* 'x86-syscall-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  arm64/syscalls: Check address limit on user-mode return
  arm/syscalls: Check address limit on user-mode return
  x86/syscalls: Check address limit on user-mode return
 2017-09-04 11:18:17 -07:00
Linus Torvalds
45153920c7 Merge branch 'x86-boot-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip 
Pull x86 boot updates from Ingo Molnar:
 "The main changes are KASL related fixes and cleanups: in particular we
  now exclude certain physical memory ranges as KASLR randomization
  targets that have proven to be unreliable (early-)RAM on some firmware
  versions"

* 'x86-boot-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/boot/KASLR: Work around firmware bugs by excluding EFI_BOOT_SERVICES_* and EFI_LOADER_* from KASLR's choice
  x86/boot/KASLR: Prefer mirrored memory regions for the kernel physical address
  efi: Introduce efi_early_memdesc_ptr to get pointer to memmap descriptor
  x86/boot/KASLR: Rename process_e820_entry() into process_mem_region()
  x86/boot/KASLR: Switch to pass struct mem_vector to process_e820_entry()
  x86/boot/KASLR: Wrap e820 entries walking code into new function process_e820_entries()
 2017-09-04 10:51:02 -07:00
Linus Torvalds
b0c79f49c3 Merge branch 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip 
Pull x86 asm updates from Ingo Molnar:

 - Introduce the ORC unwinder, which can be enabled via
   CONFIG_ORC_UNWINDER=y.

   The ORC unwinder is a lightweight, Linux kernel specific debuginfo
   implementation, which aims to be DWARF done right for unwinding.
   Objtool is used to generate the ORC unwinder tables during build, so
   the data format is flexible and kernel internal: there's no
   dependency on debuginfo created by an external toolchain.

   The ORC unwinder is almost two orders of magnitude faster than the
   (out of tree) DWARF unwinder - which is important for perf call graph
   profiling. It is also significantly simpler and is coded defensively:
   there has not been a single ORC related kernel crash so far, even
   with early versions. (knock on wood!)

   But the main advantage is that enabling the ORC unwinder allows
   CONFIG_FRAME_POINTERS to be turned off - which speeds up the kernel
   measurably:

   With frame pointers disabled, GCC does not have to add frame pointer
   instrumentation code to every function in the kernel. The kernel's
   .text size decreases by about 3.2%, resulting in better cache
   utilization and fewer instructions executed, resulting in a broad
   kernel-wide speedup. Average speedup of system calls should be
   roughly in the 1-3% range - measurements by Mel Gorman [1] have shown
   a speedup of 5-10% for some function execution intense workloads.

   The main cost of the unwinder is that the unwinder data has to be
   stored in RAM: the memory cost is 2-4MB of RAM, depending on kernel
   config - which is a modest cost on modern x86 systems.

   Given how young the ORC unwinder code is it's not enabled by default
   - but given the performance advantages the plan is to eventually make
   it the default unwinder on x86.

   See Documentation/x86/orc-unwinder.txt for more details.

 - Remove lguest support: its intended role was that of a temporary
   proof of concept for virtualization, plus its removal will enable the
   reduction (removal) of the paravirt API as well, so Rusty agreed to
   its removal. (Juergen Gross)

 - Clean up and fix FSGS related functionality (Andy Lutomirski)

 - Clean up IO access APIs (Andy Shevchenko)

 - Enhance the symbol namespace (Jiri Slaby)

* 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (47 commits)
  objtool: Handle GCC stack pointer adjustment bug
  x86/entry/64: Use ENTRY() instead of ALIGN+GLOBAL for stub32_clone()
  x86/fpu/math-emu: Add ENDPROC to functions
  x86/boot/64: Extract efi_pe_entry() from startup_64()
  x86/boot/32: Extract efi_pe_entry() from startup_32()
  x86/lguest: Remove lguest support
  x86/paravirt/xen: Remove xen_patch()
  objtool: Fix objtool fallthrough detection with function padding
  x86/xen/64: Fix the reported SS and CS in SYSCALL
  objtool: Track DRAP separately from callee-saved registers
  objtool: Fix validate_branch() return codes
  x86: Clarify/fix no-op barriers for text_poke_bp()
  x86/switch_to/64: Rewrite FS/GS switching yet again to fix AMD CPUs
  selftests/x86/fsgsbase: Test selectors 1, 2, and 3
  x86/fsgsbase/64: Report FSBASE and GSBASE correctly in core dumps
  x86/fsgsbase/64: Fully initialize FS and GS state in start_thread_common
  x86/asm: Fix UNWIND_HINT_REGS macro for older binutils
  x86/asm/32: Fix regs_get_register() on segment registers
  x86/xen/64: Rearrange the SYSCALL entries
  x86/asm/32: Remove a bunch of '& 0xffff' from pt_regs segment reads
  ...
 2017-09-04 09:52:57 -07:00
Mark Brown
f039685b2e Merge remote-tracking branches 'regulator/topic/rc5t619' and 'regulator/topic/stm32-vref' into regulator-next 2017-09-04 17:45:50 +01:00
Mark Brown
a6955d3635 Merge remote-tracking branches 'regulator/topic/mt6380', 'regulator/topic/mtk', 'regulator/topic/pv88090', 'regulator/topic/pwm' and 'regulator/topic/qcom' into regulator-next 2017-09-04 17:45:46 +01:00
Linus Torvalds
f213a6c84c Merge branch 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip 
Pull scheduler updates from Ingo Molnar:
 "The main changes in this cycle were:

   - fix affine wakeups (Peter Zijlstra)

   - improve CPU onlining (and general bootup) scalability on systems
     with ridiculous number (thousands) of CPUs (Peter Zijlstra)

   - sched/numa updates (Rik van Riel)

   - sched/deadline updates (Byungchul Park)

   - sched/cpufreq enhancements and related cleanups (Viresh Kumar)

   - sched/debug enhancements (Xie XiuQi)

   - various fixes"

* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (27 commits)
  sched/debug: Optimize sched_domain sysctl generation
  sched/topology: Avoid pointless rebuild
  sched/topology, cpuset: Avoid spurious/wrong domain rebuilds
  sched/topology: Improve comments
  sched/topology: Fix memory leak in __sdt_alloc()
  sched/completion: Document that reinit_completion() must be called after complete_all()
  sched/autogroup: Fix error reporting printk text in autogroup_create()
  sched/fair: Fix wake_affine() for !NUMA_BALANCING
  sched/debug: Intruduce task_state_to_char() helper function
  sched/debug: Show task state in /proc/sched_debug
  sched/debug: Use task_pid_nr_ns in /proc/$pid/sched
  sched/core: Remove unnecessary initialization init_idle_bootup_task()
  sched/deadline: Change return value of cpudl_find()
  sched/deadline: Make find_later_rq() choose a closer CPU in topology
  sched/numa: Scale scan period with tasks in group and shared/private
  sched/numa: Slow down scan rate if shared faults dominate
  sched/pelt: Fix false running accounting
  sched: Mark pick_next_task_dl() and build_sched_domain() as static
  sched/cpupri: Don't re-initialize 'struct cpupri'
  sched/deadline: Don't re-initialize 'struct cpudl'
  ...
 2017-09-04 09:10:24 -07:00
Linus Torvalds
9657752cb5 Merge branch 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip 
Pull perf updates from Ingo Molnar:
 "Kernel side changes:

   - Add branch type profiling/tracing support. (Jin Yao)

   - Add the PERF_SAMPLE_PHYS_ADDR ABI to allow the tracing/profiling of
     physical memory addresses, where the PMU supports it. (Kan Liang)

   - Export some PMU capability details in the new
     /sys/bus/event_source/devices/cpu/caps/ sysfs directory. (Andi
     Kleen)

   - Aux data fixes and updates (Will Deacon)

   - kprobes fixes and updates (Masami Hiramatsu)

   - AMD uncore PMU driver fixes and updates (Janakarajan Natarajan)

  On the tooling side, here's a (limited!) list of highlights - there
  were many other changes that I could not list, see the shortlog and
  git history for details:

  UI improvements:

   - Implement a visual marker for fused x86 instructions in the
     annotate TUI browser, available now in 'perf report', more work
     needed to have it available as well in 'perf top' (Jin Yao)

     Further explanation from one of Jin's patches:

             │   ┌──cmpl   $0x0,argp_program_version_hook
       81.93 │   ├──je     20
             │   │  lock   cmpxchg %esi,0x38a9a4(%rip)
             │   │↓ jne    29
             │   │↓ jmp    43
       11.47 │20:└─→cmpxch %esi,0x38a999(%rip)

     That means the cmpl+je is a fused instruction pair and they should
     be considered together.

   - Record the branch type and then show statistics and info about in
     callchain entries (Jin Yao)

     Example from one of Jin's patches:

        # perf record -g -j any,save_type
        # perf report --branch-history --stdio --no-children

        38.50%  div.c:45                [.] main                    div
                |
                ---main div.c:42 (RET CROSS_2M cycles:2)
                   compute_flag div.c:28 (cycles:2)
                   compute_flag div.c:27 (RET CROSS_2M cycles:1)
                   rand rand.c:28 (cycles:1)
                   rand rand.c:28 (RET CROSS_2M cycles:1)
                   __random random.c:298 (cycles:1)
                   __random random.c:297 (COND_BWD CROSS_2M cycles:1)
                   __random random.c:295 (cycles:1)
                   __random random.c:295 (COND_BWD CROSS_2M cycles:1)
                   __random random.c:295 (cycles:1)
                   __random random.c:295 (RET CROSS_2M cycles:9)

  namespaces support:

   - Add initial support for namespaces, using setns to access files in
     namespaces, grabbing their build-ids, etc. (Krister Johansen)

  perf trace enhancements:

   - Beautify pkey_{alloc,free,mprotect} arguments in 'perf trace'
     (Arnaldo Carvalho de Melo)

   - Add initial 'clone' syscall args beautifier in 'perf trace'
     (Arnaldo Carvalho de Melo)

   - Ignore 'fd' and 'offset' args for MAP_ANONYMOUS in 'perf trace'
     (Arnaldo Carvalho de Melo)

   - Beautifiers for the 'cmd' arg of several ioctl types, including:
     sound, DRM, KVM, vhost virtio and perf_events. (Arnaldo Carvalho de
     Melo)

   - Add PERF_SAMPLE_CALLCHAIN and PERF_RECORD_MMAP[2] to 'perf data'
     CTF conversion, allowing CTF trace visualization tools to show
     callchains and to resolve symbols (Geneviève Bastien)

   - Beautify the fcntl syscall, which is an interesting one in the
     sense that infrastructure had to be put in place to change the
     formatters of some arguments according to the value in a previous
     one, i.e. cmd dictates how arg and the syscall return will be
     formatted. (Arnaldo Carvalho de Melo

  perf stat enhancements:

   - Use group read for event groups in 'perf stat', reducing overhead
     when groups are defined in the event specification, i.e. when using
     {} to enclose a list of events, asking them to be read at the same
     time, e.g.: "perf stat -e '{cycles,instructions}'" (Jiri Olsa)

  pipe mode improvements:

   - Process tracing data in 'perf annotate' pipe mode (David
     Carrillo-Cisneros)

   - Add header record types to pipe-mode, now this command:

        $ perf record -o - -e cycles sleep 1 | perf report --stdio --header

     Will show the same as in non-pipe mode, i.e. involving a perf.data
     file (David Carrillo-Cisneros)

  Vendor specific hardware event support updates/enhancements:

   - Update POWER9 vendor events tables (Sukadev Bhattiprolu)

   - Add POWER9 PMU events Sukadev (Bhattiprolu)

   - Support additional POWER8+ PVR in PMU mapfile (Shriya)

   - Add Skylake server uncore JSON vendor events (Andi Kleen)

   - Support exporting Intel PT data to sqlite3 with python perf
     scripts, this is in addition to the postgresql support that was
     already there (Adrian Hunter)"

* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (253 commits)
  perf symbols: Fix plt entry calculation for ARM and AARCH64
  perf probe: Fix kprobe blacklist checking condition
  perf/x86: Fix caps/ for !Intel
  perf/core, x86: Add PERF_SAMPLE_PHYS_ADDR
  perf/core, pt, bts: Get rid of itrace_started
  perf trace beauty: Beautify pkey_{alloc,free,mprotect} arguments
  tools headers: Sync cpu features kernel ABI headers with tooling headers
  perf tools: Pass full path of FEATURES_DUMP
  perf tools: Robustify detection of clang binary
  tools lib: Allow external definition of CC, AR and LD
  perf tools: Allow external definition of flex and bison binary names
  tools build tests: Don't hardcode gcc name
  perf report: Group stat values on global event id
  perf values: Zero value buffers
  perf values: Fix allocation check
  perf values: Fix thread index bug
  perf report: Add dump_read function
  perf record: Set read_format for inherit_stat
  perf c2c: Fix remote HITM detection for Skylake
  perf tools: Fix static build with newer toolchains
  ...
 2017-09-04 08:39:02 -07:00
Linus Torvalds
0081a0ce80 Merge branch 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip 
Pull RCU updates from Ingo Molnad:
 "The main RCU related changes in this cycle were:

   - Removal of spin_unlock_wait()
   - SRCU updates
   - RCU torture-test updates
   - RCU Documentation updates
   - Extend the sys_membarrier() ABI with the MEMBARRIER_CMD_PRIVATE_EXPEDITED variant
   - Miscellaneous RCU fixes
   - CPU-hotplug fixes"

* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (63 commits)
  arch: Remove spin_unlock_wait() arch-specific definitions
  locking: Remove spin_unlock_wait() generic definitions
  drivers/ata: Replace spin_unlock_wait() with lock/unlock pair
  ipc: Replace spin_unlock_wait() with lock/unlock pair
  exit: Replace spin_unlock_wait() with lock/unlock pair
  completion: Replace spin_unlock_wait() with lock/unlock pair
  doc: Set down RCU's scheduling-clock-interrupt needs
  doc: No longer allowed to use rcu_dereference on non-pointers
  doc: Add RCU files to docbook-generation files
  doc: Update memory-barriers.txt for read-to-write dependencies
  doc: Update RCU documentation
  membarrier: Provide expedited private command
  rcu: Remove exports from rcu_idle_exit() and rcu_idle_enter()
  rcu: Add warning to rcu_idle_enter() for irqs enabled
  rcu: Make rcu_idle_enter() rely on callers disabling irqs
  rcu: Add assertions verifying blocked-tasks list
  rcu/tracing: Set disable_rcu_irq_enter on rcu_eqs_exit()
  rcu: Add TPS() protection for _rcu_barrier_trace strings
  rcu: Use idle versions of swait to make idle-hack clear
  swait: Add idle variants which don't contribute to load average
  ...
 2017-09-04 08:13:52 -07:00