mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git
synced 2025-01-17 22:05:08 +00:00
70392 Commits
Author | SHA1 | Message | Date | |
---|---|---|---|---|
Linus Torvalds
|
90a498f294 |
phy-for-6.9
- New Support - Qualcomm X1E80100 PCIe phy support, SM8550 PCIe1 PHY, SC7180 UFS PHY and SDM630 USBC support - Rockchip HDMI/eDP Combo PHY driver - Mediatek MT8365 CSI phy driver - Updates - Rework on Qualcomm phy PCS registers and type-c handling - Cadence torrent phy updates for multilink configuration - TI gmii resume support -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEE+vs47OPLdNbVcHzyfBQHDyUjg0cFAmX0JdwACgkQfBQHDyUj g0fFPxAAl0AqhOXKHLxxB7wihGGIm7V6djOrathoCteo8oxDNgY1uWmOELrM6ama KCv4wqPHf5m9ImFFXDwIb1qVBu+MadDdOl+kUmP8pPQt4WYT6hEJONX7G54VLmIZ W5iH3zBrZMvo6R5xSiOeySG+OyKgJjj8K1SMBxNA2/PST4Y+pslB1yZ9oUm57hTy YA3/pihiPwejQEk5WyrXN1LTIEDT0/fPZ70I7mvo+30CuSVaWK16fnPLVKWfKd99 h6a9VDcYDywyFnUParYHCLhcenR/a1Sw09zsGRmG+eTUVSzz7kFI8T8hB4gsRf5i qi7lqyUWTmkaiUdLLRf5MFdhu2PoOwLzHppYlXaCne9IyHUtvc+P+hkS6D2sSlB9 Pqc7Yyltxks8TBmechwqHV6dhA/odrlJKwh62MbOuGe83vaqrpkh6/Yx++l8kqFu 0kn1TyQbw14Y/ugOK2Mpgw6ApUNKWZhXNyiDBfU1zV0wycwbFqHBMg7fUZn7egd2 ohnOYqWyBc3t0eThxQQxa0wzfke5+yLzkTTch/qMPgkgkKzQuVkkYCiDodHP12BA xymlQB+5tFQT1NZTlqvHNmOqa0zaCbksPCZRBQX1HmZVt9bBY8m+fInd0iY2gCGo y666sKdVAW6bIj09zUtS2VqLg31+8uwInwycEFkIyEy8qyHuQqI= =WNGJ -----END PGP SIGNATURE----- Merge tag 'phy-for-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy Pull phy updates from Vinod Koul: "New hardware support: - Qualcomm X1E80100 PCIe phy support, SM8550 PCIe1 PHY, SC7180 UFS PHY and SDM630 USBC support - Rockchip HDMI/eDP Combo PHY driver - Mediatek MT8365 CSI phy driver Updates: - Rework on Qualcomm phy PCS registers and type-c handling - Cadence torrent phy updates for multilink configuration - TI gmii resume support" * tag 'phy-for-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (41 commits) phy: constify of_phandle_args in xlate phy: ti: tusb1210: Define device IDs phy: ti: tusb1210: Use temporary variable for struct device phy: rockchip: Add Samsung HDMI/eDP Combo PHY driver dt-bindings: phy: Add Rockchip HDMI/eDP Combo PHY schema phy: ti: gmii-sel: add resume support phy: mtk-mipi-csi: add driver for CSI phy dt-bindings: phy: add mediatek MIPI CD-PHY module v0.5 phy: cadence-torrent: Add USXGMII(156.25MHz) + SGMII/QSGMII(100MHz) multilink config for TI J7200 dt-bindings: phy: cadence-torrent: Add a separate compatible for TI J7200 phy: cadence-torrent: Add USXGMII(156.25MHz) + SGMII/QSGMII(100MHz) multilink configuration phy: cadence-torrent: Add PCIe(100MHz) + USXGMII(156.25MHz) multilink configuration dt-bindings: phy: cadence-torrent: Add optional input reference clock for PLL1 phy: qcom-qmp-ufs: Switch to devm_clk_bulk_get_all() API dt-bindings: phy: qmp-ufs: Fix PHY clocks phy: qcom: sgmii-eth: move PCS registers to separate header phy: qcom: sgmii-eth: use existing register definitions phy: qcom: qmp-usbc: drop has_pwrdn_delay handling phy: qcom: qmp: move common bits definitions to common header phy: qcom: qmp: split DP PHY registers to separate headers ... |
||
Linus Torvalds
|
02c163e959 |
cxl for v6.9
- Supplement ACPI HMAT reported memory performance with native CXL memory performance enumeration - Add support for CXL error injection via the ACPI EINJ mechanism - Cleanup CXL DOE and CDAT integration - Miscellaneous cleanups and fixes -----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQSbo+XnGs+rwLz9XGXfioYZHlFsZwUCZfSddgAKCRDfioYZHlFs Z+QJAQC0DaU/QbziEUFgd6r92nLA9PHLWi2zhjsSjyuJ3kh3IQD+KN0h8IZ+Av05 EOjLw21+ejwJ2dtCDcy2dlSpS6653wc= =czLR -----END PGP SIGNATURE----- Merge tag 'cxl-for-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl Pull CXL updates from Dan Williams: "CXL has mechanisms to enumerate the performance characteristics of memory devices. Those mechanisms allow Linux to build the equivalent of ACPI SRAT, SLIT, and HMAT tables dynamically at runtime. That capability is necessary because static ACPI can not represent dynamic CXL configurations (and reconfigurations). So, building on the v6.8 work to add "Quality of Service" enumeration, this update plumbs CXL "access coordinates" (read/write access latency and bandwidth) in all the same places that ACPI HMAT feeds similar data. Follow-on patches from the -mm side can then use that data to feed mechanisms like mm/memory-tiers.c. Greg has acked the touch to drivers/base/. The other feature update this cycle is support for CXL error injection via the ACPI EINJ module. That facility enables injection of bus protocol errors provided the user knows the magic address values to insert in the interface. To hide that magic, and make this easier to use, new error injection attributes were added to CXL debugfs. That interface injects the errors relative to a CXL object rather than require user tooling to know how to lookup and inject RCRB (Root Complex Register Block) addresses into the raw EINJ debugfs interface. It received some helpful review comments from Tony, but no explicit acks from the ACPI side. The primary user visible change for existing EINJ users is that they may find that einj.ko was already loaded by cxl_core.ko. Previously, einj.ko was only loaded on demand. The usual collection of miscellaneous cleanups are also present this cycle. Summary: - Supplement ACPI HMAT reported memory performance with native CXL memory performance enumeration - Add support for CXL error injection via the ACPI EINJ mechanism - Cleanup CXL DOE and CDAT integration - Miscellaneous cleanups and fixes" * tag 'cxl-for-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (21 commits) Documentation/ABI/testing/debugfs-cxl: Fix "Unexpected indentation" lib/firmware_table: Provide buffer length argument to cdat_table_parse() cxl/pci: Get rid of pointer arithmetic reading CDAT table cxl/pci: Rename DOE mailbox handle to doe_mb cxl: Fix the incorrect assignment of SSLBIS entry pointer initial location cxl/core: Add CXL EINJ debugfs files EINJ, Documentation: Update EINJ kernel doc EINJ: Add CXL error type support EINJ: Migrate to a platform driver cxl/region: Deal with numa nodes not enumerated by SRAT cxl/region: Add memory hotplug notifier for cxl region cxl/region: Add sysfs attribute for locality attributes of CXL regions cxl/region: Calculate performance data for a region cxl: Set cxlmd->endpoint before adding port device cxl: Move QoS class to be calculated from the nearest CPU cxl: Split out host bridge access coordinates cxl: Split out combine_coordinates() for common shared usage ACPI: HMAT / cxl: Add retrieval of generic port coordinates for both access classes ACPI: HMAT: Introduce 2 levels of generic port access class base/node / ACPI: Enumerate node access class for 'struct access_coordinate' ... |
||
Linus Torvalds
|
c8e7699616 |
This update includes the following changes:
API: - Avoid unnecessary copying in scomp for trivial SG lists. Algorithms: - Optimise NEON CCM implementation on ARM64. Drivers: - Add queue stop/query debugfs support in hisilicon/qm. - -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEn51F/lCuNhUwmDeSxycdCkmxi6cFAmXxDbcACgkQxycdCkmx i6dCzw//dI5CuszRMalZu8fwvh7K48d4GoY/5uuc1vPK6yLyc5dl6CzPsrKhmBGO Ip2fUCFoO+ViWl5tw8SjOOEnPRztETrIGlOM5PHOIxRuSA6lbcsdo+EQja4WBDo1 fGUNaNVW9eY9XsaUw46uwxaicd+xOqRGJURKB2XuzSHACln/QrNy74aVdbc6VhaK Jnh4o2blsEh7jcVAK2ahNmmDm739w8C462Go4UIl8xcM693HtjUUFx7TALpI0iC+ BWxctAV9IzA/siUwztvwwlo+V1KZbjZFD5XfC/erkV0gFs7ll8IcuDFnZ1suMvt2 Z+6OVhghkkvMJJEl1qKNxVJITOUdXH0yKWqTbEHuFlV7VV+9hjUlWlvRVm7ZIrXf ZXi/OpBJRAIBB6fJqy1RAvfIZUR8Dl8i8RKLVawdqFLbB+XCOiIK7a8+5hCKaWsU 0DVFNCfiJFPIiByzxXV+4Jt/hzxx/qseIbTiUShdoXeHOVWMgH5H255MWJv5qjVy aSwgQLX6MlY9Pj+w5cPHAUjOiGjiAa3iKwsbnmo5lszsPl4KR407gaJnV7VI4s6R fhqAgIjJ4Ik2lHzQRM89QU2OOogVBPs+FHEkk98lak5CATpjUq97iLbTharAg3dc l8FLoSB9+NM+RCbnzUXuOIvoU/okSM4+j6a3xAnLQH6OxBOtk3Y= =Uw2R -----END PGP SIGNATURE----- Merge tag 'v6.9-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto updates from Herbert Xu: "API: - Avoid unnecessary copying in scomp for trivial SG lists Algorithms: - Optimise NEON CCM implementation on ARM64 Drivers: - Add queue stop/query debugfs support in hisilicon/qm - Intel qat updates and cleanups" * tag 'v6.9-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (79 commits) Revert "crypto: remove CONFIG_CRYPTO_STATS" crypto: scomp - remove memcpy if sg_nents is 1 and pages are lowmem crypto: tcrypt - add ffdhe2048(dh) test crypto: iaa - fix the missing CRYPTO_ALG_ASYNC in cra_flags crypto: hisilicon/zip - fix the missing CRYPTO_ALG_ASYNC in cra_flags hwrng: hisi - use dev_err_probe MAINTAINERS: Remove T Ambarus from few mchp entries crypto: iaa - Fix comp/decomp delay statistics crypto: iaa - Fix async_disable descriptor leak dt-bindings: rng: atmel,at91-trng: add sam9x7 TRNG dt-bindings: crypto: add sam9x7 in Atmel TDES dt-bindings: crypto: add sam9x7 in Atmel SHA dt-bindings: crypto: add sam9x7 in Atmel AES crypto: remove CONFIG_CRYPTO_STATS crypto: dh - Make public key test FIPS-only crypto: rockchip - fix to check return value crypto: jitter - fix CRYPTO_JITTERENTROPY help text crypto: qat - make ring to service map common for QAT GEN4 crypto: qat - fix ring to service map for dcc in 420xx crypto: qat - fix ring to service map for dcc in 4xxx ... |
||
Linus Torvalds
|
4f712ee0cb |
S390:
* Changes to FPU handling came in via the main s390 pull request * Only deliver to the guest the SCLP events that userspace has requested. * More virtual vs physical address fixes (only a cleanup since virtual and physical address spaces are currently the same). * Fix selftests undefined behavior. x86: * Fix a restriction that the guest can't program a PMU event whose encoding matches an architectural event that isn't included in the guest CPUID. The enumeration of an architectural event only says that if a CPU supports an architectural event, then the event can be programmed *using the architectural encoding*. The enumeration does NOT say anything about the encoding when the CPU doesn't report support the event *in general*. It might support it, and it might support it using the same encoding that made it into the architectural PMU spec. * Fix a variety of bugs in KVM's emulation of RDPMC (more details on individual commits) and add a selftest to verify KVM correctly emulates RDMPC, counter availability, and a variety of other PMC-related behaviors that depend on guest CPUID and therefore are easier to validate with selftests than with custom guests (aka kvm-unit-tests). * Zero out PMU state on AMD if the virtual PMU is disabled, it does not cause any bug but it wastes time in various cases where KVM would check if a PMC event needs to be synthesized. * Optimize triggering of emulated events, with a nice ~10% performance improvement in VM-Exit microbenchmarks when a vPMU is exposed to the guest. * Tighten the check for "PMI in guest" to reduce false positives if an NMI arrives in the host while KVM is handling an IRQ VM-Exit. * Fix a bug where KVM would report stale/bogus exit qualification information when exiting to userspace with an internal error exit code. * Add a VMX flag in /proc/cpuinfo to report 5-level EPT support. * Rework TDP MMU root unload, free, and alloc to run with mmu_lock held for read, e.g. to avoid serializing vCPUs when userspace deletes a memslot. * Tear down TDP MMU page tables at 4KiB granularity (used to be 1GiB). KVM doesn't support yielding in the middle of processing a zap, and 1GiB granularity resulted in multi-millisecond lags that are quite impolite for CONFIG_PREEMPT kernels. * Allocate write-tracking metadata on-demand to avoid the memory overhead when a kernel is built with i915 virtualization support but the workloads use neither shadow paging nor i915 virtualization. * Explicitly initialize a variety of on-stack variables in the emulator that triggered KMSAN false positives. * Fix the debugregs ABI for 32-bit KVM. * Rework the "force immediate exit" code so that vendor code ultimately decides how and when to force the exit, which allowed some optimization for both Intel and AMD. * Fix a long-standing bug where kvm_has_noapic_vcpu could be left elevated if vCPU creation ultimately failed, causing extra unnecessary work. * Cleanup the logic for checking if the currently loaded vCPU is in-kernel. * Harden against underflowing the active mmu_notifier invalidation count, so that "bad" invalidations (usually due to bugs elsehwere in the kernel) are detected earlier and are less likely to hang the kernel. x86 Xen emulation: * Overlay pages can now be cached based on host virtual address, instead of guest physical addresses. This removes the need to reconfigure and invalidate the cache if the guest changes the gpa but the underlying host virtual address remains the same. * When possible, use a single host TSC value when computing the deadline for Xen timers in order to improve the accuracy of the timer emulation. * Inject pending upcall events when the vCPU software-enables its APIC to fix a bug where an upcall can be lost (and to follow Xen's behavior). * Fall back to the slow path instead of warning if "fast" IRQ delivery of Xen events fails, e.g. if the guest has aliased xAPIC IDs. RISC-V: * Support exception and interrupt handling in selftests * New self test for RISC-V architectural timer (Sstc extension) * New extension support (Ztso, Zacas) * Support userspace emulation of random number seed CSRs. ARM: * Infrastructure for building KVM's trap configuration based on the architectural features (or lack thereof) advertised in the VM's ID registers * Support for mapping vfio-pci BARs as Normal-NC (vaguely similar to x86's WC) at stage-2, improving the performance of interacting with assigned devices that can tolerate it * Conversion of KVM's representation of LPIs to an xarray, utilized to address serialization some of the serialization on the LPI injection path * Support for _architectural_ VHE-only systems, advertised through the absence of FEAT_E2H0 in the CPU's ID register * Miscellaneous cleanups, fixes, and spelling corrections to KVM and selftests LoongArch: * Set reserved bits as zero in CPUCFG. * Start SW timer only when vcpu is blocking. * Do not restart SW timer when it is expired. * Remove unnecessary CSR register saving during enter guest. * Misc cleanups and fixes as usual. Generic: * cleanup Kconfig by removing CONFIG_HAVE_KVM, which was basically always true on all architectures except MIPS (where Kconfig determines the available depending on CPU capabilities). It is replaced either by an architecture-dependent symbol for MIPS, and IS_ENABLED(CONFIG_KVM) everywhere else. * Factor common "select" statements in common code instead of requiring each architecture to specify it * Remove thoroughly obsolete APIs from the uapi headers. * Move architecture-dependent stuff to uapi/asm/kvm.h * Always flush the async page fault workqueue when a work item is being removed, especially during vCPU destruction, to ensure that there are no workers running in KVM code when all references to KVM-the-module are gone, i.e. to prevent a very unlikely use-after-free if kvm.ko is unloaded. * Grab a reference to the VM's mm_struct in the async #PF worker itself instead of gifting the worker a reference, so that there's no need to remember to *conditionally* clean up after the worker. Selftests: * Reduce boilerplate especially when utilize selftest TAP infrastructure. * Add basic smoke tests for SEV and SEV-ES, along with a pile of library support for handling private/encrypted/protected memory. * Fix benign bugs where tests neglect to close() guest_memfd files. -----BEGIN PGP SIGNATURE----- iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmX0iP8UHHBib256aW5p QHJlZGhhdC5jb20ACgkQv/vSX3jHroND7wf+JZoNvwZ+bmwWe/4jn/YwNoYi/C5z eypn8M1gsWEccpCpqPBwznVm9T29rF4uOlcMvqLEkHfTpaL1EKUUjP1lXPz/ileP 6a2RdOGxAhyTiFC9fjy+wkkjtLbn1kZf6YsS0hjphP9+w0chNbdn0w81dFVnXryd j7XYI8R/bFAthNsJOuZXSEjCfIHxvTTG74OrTf1B1FEBB+arPmrgUeJftMVhffQK Sowgg8L/Ii/x6fgV5NZQVSIyVf1rp8z7c6UaHT4Fwb0+RAMW8p9pYv9Qp1YkKp8y 5j0V9UzOHP7FRaYimZ5BtwQoqiZXYylQ+VuU/Y2f4X85cvlLzSqxaEMAPA== =mqOV -----END PGP SIGNATURE----- Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm Pull kvm updates from Paolo Bonzini: "S390: - Changes to FPU handling came in via the main s390 pull request - Only deliver to the guest the SCLP events that userspace has requested - More virtual vs physical address fixes (only a cleanup since virtual and physical address spaces are currently the same) - Fix selftests undefined behavior x86: - Fix a restriction that the guest can't program a PMU event whose encoding matches an architectural event that isn't included in the guest CPUID. The enumeration of an architectural event only says that if a CPU supports an architectural event, then the event can be programmed *using the architectural encoding*. The enumeration does NOT say anything about the encoding when the CPU doesn't report support the event *in general*. It might support it, and it might support it using the same encoding that made it into the architectural PMU spec - Fix a variety of bugs in KVM's emulation of RDPMC (more details on individual commits) and add a selftest to verify KVM correctly emulates RDMPC, counter availability, and a variety of other PMC-related behaviors that depend on guest CPUID and therefore are easier to validate with selftests than with custom guests (aka kvm-unit-tests) - Zero out PMU state on AMD if the virtual PMU is disabled, it does not cause any bug but it wastes time in various cases where KVM would check if a PMC event needs to be synthesized - Optimize triggering of emulated events, with a nice ~10% performance improvement in VM-Exit microbenchmarks when a vPMU is exposed to the guest - Tighten the check for "PMI in guest" to reduce false positives if an NMI arrives in the host while KVM is handling an IRQ VM-Exit - Fix a bug where KVM would report stale/bogus exit qualification information when exiting to userspace with an internal error exit code - Add a VMX flag in /proc/cpuinfo to report 5-level EPT support - Rework TDP MMU root unload, free, and alloc to run with mmu_lock held for read, e.g. to avoid serializing vCPUs when userspace deletes a memslot - Tear down TDP MMU page tables at 4KiB granularity (used to be 1GiB). KVM doesn't support yielding in the middle of processing a zap, and 1GiB granularity resulted in multi-millisecond lags that are quite impolite for CONFIG_PREEMPT kernels - Allocate write-tracking metadata on-demand to avoid the memory overhead when a kernel is built with i915 virtualization support but the workloads use neither shadow paging nor i915 virtualization - Explicitly initialize a variety of on-stack variables in the emulator that triggered KMSAN false positives - Fix the debugregs ABI for 32-bit KVM - Rework the "force immediate exit" code so that vendor code ultimately decides how and when to force the exit, which allowed some optimization for both Intel and AMD - Fix a long-standing bug where kvm_has_noapic_vcpu could be left elevated if vCPU creation ultimately failed, causing extra unnecessary work - Cleanup the logic for checking if the currently loaded vCPU is in-kernel - Harden against underflowing the active mmu_notifier invalidation count, so that "bad" invalidations (usually due to bugs elsehwere in the kernel) are detected earlier and are less likely to hang the kernel x86 Xen emulation: - Overlay pages can now be cached based on host virtual address, instead of guest physical addresses. This removes the need to reconfigure and invalidate the cache if the guest changes the gpa but the underlying host virtual address remains the same - When possible, use a single host TSC value when computing the deadline for Xen timers in order to improve the accuracy of the timer emulation - Inject pending upcall events when the vCPU software-enables its APIC to fix a bug where an upcall can be lost (and to follow Xen's behavior) - Fall back to the slow path instead of warning if "fast" IRQ delivery of Xen events fails, e.g. if the guest has aliased xAPIC IDs RISC-V: - Support exception and interrupt handling in selftests - New self test for RISC-V architectural timer (Sstc extension) - New extension support (Ztso, Zacas) - Support userspace emulation of random number seed CSRs ARM: - Infrastructure for building KVM's trap configuration based on the architectural features (or lack thereof) advertised in the VM's ID registers - Support for mapping vfio-pci BARs as Normal-NC (vaguely similar to x86's WC) at stage-2, improving the performance of interacting with assigned devices that can tolerate it - Conversion of KVM's representation of LPIs to an xarray, utilized to address serialization some of the serialization on the LPI injection path - Support for _architectural_ VHE-only systems, advertised through the absence of FEAT_E2H0 in the CPU's ID register - Miscellaneous cleanups, fixes, and spelling corrections to KVM and selftests LoongArch: - Set reserved bits as zero in CPUCFG - Start SW timer only when vcpu is blocking - Do not restart SW timer when it is expired - Remove unnecessary CSR register saving during enter guest - Misc cleanups and fixes as usual Generic: - Clean up Kconfig by removing CONFIG_HAVE_KVM, which was basically always true on all architectures except MIPS (where Kconfig determines the available depending on CPU capabilities). It is replaced either by an architecture-dependent symbol for MIPS, and IS_ENABLED(CONFIG_KVM) everywhere else - Factor common "select" statements in common code instead of requiring each architecture to specify it - Remove thoroughly obsolete APIs from the uapi headers - Move architecture-dependent stuff to uapi/asm/kvm.h - Always flush the async page fault workqueue when a work item is being removed, especially during vCPU destruction, to ensure that there are no workers running in KVM code when all references to KVM-the-module are gone, i.e. to prevent a very unlikely use-after-free if kvm.ko is unloaded - Grab a reference to the VM's mm_struct in the async #PF worker itself instead of gifting the worker a reference, so that there's no need to remember to *conditionally* clean up after the worker Selftests: - Reduce boilerplate especially when utilize selftest TAP infrastructure - Add basic smoke tests for SEV and SEV-ES, along with a pile of library support for handling private/encrypted/protected memory - Fix benign bugs where tests neglect to close() guest_memfd files" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (246 commits) selftests: kvm: remove meaningless assignments in Makefiles KVM: riscv: selftests: Add Zacas extension to get-reg-list test RISC-V: KVM: Allow Zacas extension for Guest/VM KVM: riscv: selftests: Add Ztso extension to get-reg-list test RISC-V: KVM: Allow Ztso extension for Guest/VM RISC-V: KVM: Forward SEED CSR access to user space KVM: riscv: selftests: Add sstc timer test KVM: riscv: selftests: Change vcpu_has_ext to a common function KVM: riscv: selftests: Add guest helper to get vcpu id KVM: riscv: selftests: Add exception handling support LoongArch: KVM: Remove unnecessary CSR register saving during enter guest LoongArch: KVM: Do not restart SW timer when it is expired LoongArch: KVM: Start SW timer only when vcpu is blocking LoongArch: KVM: Set reserved bits as zero in CPUCFG KVM: selftests: Explicitly close guest_memfd files in some gmem tests KVM: x86/xen: fix recursive deadlock in timer injection KVM: pfncache: simplify locking and make more self-contained KVM: x86/xen: remove WARN_ON_ONCE() with false positives in evtchn delivery KVM: x86/xen: inject vCPU upcall vector when local APIC is enabled KVM: x86/xen: improve accuracy of Xen timers ... |
||
Linus Torvalds
|
54f42d2ca8 |
- added support for Mobileye SoCs
- unified GPR/CP0 regs handling for uasm - cleanups and fixes -----BEGIN PGP SIGNATURE----- iQJOBAABCAA4FiEEbt46xwy6kEcDOXoUeZbBVTGwZHAFAmX0Fx4aHHRzYm9nZW5k QGFscGhhLmZyYW5rZW4uZGUACgkQeZbBVTGwZHDraxAAkrN9HiaozP0NtXfMPb5v 7aJiPbgDrABmUxsvPAf054rtSGrORhNG9PM7+PYxhp0kYgb4vqVrh+ICTBVFKkZr MwGiYahkgddPlpaowh8G7HtrMyiW5CpMh6O31nw88OYGjoRuwCic8z8kQlzZMNJe JGgX+TNJtDW0yUp93zOu+j99ImByfgC7P1/V+8fRJ7js3trQ/JWEpW0e+nez/2Sz SNANiDA6g8scGvh9OOEwBG4jh6XLbRSOvMECskCCTGOBDpzJCN59j1irC2JRnZ6H PIirv6sfK4/n8/YpCLa+j9DOdHl2D/bW2LLE0sYVfew5T2lK3yainhdHIbsCC/J1 89YiXi6I1anD4nERODSEkq40naQJVwuM3LPW2pVVcUyRDP28cEsqn7MDJp1L79fq sxtUy+Kur4ryCALwlaYBIVI+9SRAvcV8b9z0Z37dpN57h49d+o65tEuYle69t7Cy uM9ECTE3ZqgHvuyvSmRH69KLEuGahLavtUHjGs60or1cgVXznQpqMvS9soIa+IAQ uuZo7Cb0TBedVAEjcFSxAMrpmx+sGKAPvWauqBFHH9wrTOjYbkzGQGCRABXjafmi vGgGYCYbRhFFrPJXf48hAsdLNqOxwXotvCU/9eP2HwxaZD8OTArhrO/j+dMqiapm //2zHnmcSZ4H17ml8YySiqQ= =M7G5 -----END PGP SIGNATURE----- Merge tag 'mips_6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux Pull MIPS updates from Thomas Bogendoerfer: - added support for Mobileye SoCs - unified GPR/CP0 regs handling for uasm - cleanups and fixes * tag 'mips_6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (56 commits) mips: cm: Convert __mips_cm_phys_base() to weak function mips: cm: Convert __mips_cm_l2sync_phys_base() to weak function mips: dts: ralink: mt7621: add cell count properties to usb mips: dts: ralink: mt7621: add serial1 and serial2 nodes mips: dts: ralink: mt7621: reorder serial0 properties mips: dts: ralink: mt7621: associate uart1_pins with serial0 MIPS: ralink: Don't use "proxy" headers mips: sibyte: make tb_class constant mips: mt: make mt_class constant MIPS: ralink: Remove unused of_gpio.h bus: bt1-apb: Remove duplicate include MAINTAINERS: remove entry to non-existing file in MOBILEYE MIPS SOCS MIPS: mipsregs: Parse fp and sp register by name in parse_r tty: mips_ejtag_fdc: Fix passing incompatible pointer type warning mips: zboot: Fix "no previous prototype" build warning MIPS: mipsregs: Set proper ISA level for virt extensions MIPS: Implement microMIPS MT ASE helpers MIPS: Limit MIPS_MT_SMP support by ISA reversion MIPS: Loongson64: test for -march=loongson3a cflag MIPS: BMIPS: Drop unnecessary assembler flag ... |
||
Linus Torvalds
|
ab522e1478 |
Devicetree updates for v6.9:
DT core: - Add cleanup.h based auto release of struct device_node pointers via __free marking and new for_each_child_of_node_scoped() iterator to use it. - Always create a base skeleton DT when CONFIG_OF is enabled. This supports several usecases of adding DT data on non-DT booted systems. - Move around some /reserved-memory code in preparation for further improvements - Add a stub for_each_property_of_node() for !OF - Adjust the printk levels on some messages - Fix __be32 sparse warning - Drop RESERVEDMEM_OF_DECLARE usage from Freescale qbman driver (currently orphaned) - Add Saravana Kannan and drop Frank Rowand as DT maintainers DT bindings: - Convert Mediatek timer, Mediatek sysirq, fsl,imx6ul-tsc, fsl,imx6ul-pinctrl, Atmel AIC, Atmel HLCDC, FPGA region, and xlnx,sd-fec to DT schemas - Add existing, but undocumented fsl,imx-anatop binding - Add bunch of undocumented vendor prefixes used in compatible strings - Drop obsolete brcm,bcm2835-pm-wdt binding - Drop obsolete i2c.txt which as been replaced with schema in dtschema - Add DPS310 device and sort trivial-devices.yaml - Enable undocumented compatible checks on DT binding examples - More QCom maintainer fixes/updates - Updates to writing-schema.rst and DT submitting-patches.rst to cover some frequent review comments - Clean-up SPDX tags to use 'OR' rather than 'or' -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEktVUI4SxYhzZyEuo+vtdtY28YcMFAmX0foEACgkQ+vtdtY28 YcOkUg//T5Q+ZudVn/oJGre3crfPU4O/RHbG+brbwpBZEdiwTGlIjI8ceThjumCO MY25yRewCIZtS8MLlRb/lNPUjQxPeyYWnpO3KZHbOJhU8bJCl2M5P0CQOYJNp0fl fMFhFU5bKVoXyK6y3qx7ivZTXSBCz9KzB1HxY3LueMHVgWiO1Oi++XjLfcos86Mh 7dKZKNbpcnBFkXiESMksQS+asZkoRtZloFg4iFjniSLa8AgYJLsZXd7iW4s0IXy+ Xj+5IcIRcPv2xQoXfCvlcKMheJyePDA1coYpO8pmOYOpjCQzsCnnbzoNERW6hc9u 0DF2IWnq9WLlQ8RVijbECRPgwW6zuU+aklUZLz2q0AiwCVySHaMdC9iYe+KK/7GH m0F21x5mpfK0LVfOMWLsmuqKWn9J164VAeTY9zHqcWuvCohD5ulftvQgRBEiSDtv V3l668t6v67iMkYa8SncbuMkV/NSShWPGne+yP3smvL0pe0P0MJYb1XSstlbNXuK whTDaCydEHx3JPJ6VS/1aJnELFm+uZVl8wjhfrgbWo2hIC83qjN3k0yV+vFNdFzT 5PUfI858fvgYOrGsswYCCJXmb/s37NImCnIF/sjqvj50BA468261KYAFtapa2Vlj uvpKgIZHJEDOK6TPlk5n7+aaOwoLMYzm+yov/0gyRpRKqsXu52U= =YzNN -----END PGP SIGNATURE----- Merge tag 'devicetree-for-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull devicetree updates from Rob Herring: "DT core: - Add cleanup.h based auto release of struct device_node pointers via __free marking and new for_each_child_of_node_scoped() iterator to use it. - Always create a base skeleton DT when CONFIG_OF is enabled. This supports several usecases of adding DT data on non-DT booted systems. - Move around some /reserved-memory code in preparation for further improvements - Add a stub for_each_property_of_node() for !OF - Adjust the printk levels on some messages - Fix __be32 sparse warning - Drop RESERVEDMEM_OF_DECLARE usage from Freescale qbman driver (currently orphaned) - Add Saravana Kannan and drop Frank Rowand as DT maintainers DT bindings: - Convert Mediatek timer, Mediatek sysirq, fsl,imx6ul-tsc, fsl,imx6ul-pinctrl, Atmel AIC, Atmel HLCDC, FPGA region, and xlnx,sd-fec to DT schemas - Add existing, but undocumented fsl,imx-anatop binding - Add bunch of undocumented vendor prefixes used in compatible strings - Drop obsolete brcm,bcm2835-pm-wdt binding - Drop obsolete i2c.txt which as been replaced with schema in dtschema - Add DPS310 device and sort trivial-devices.yaml - Enable undocumented compatible checks on DT binding examples - More QCom maintainer fixes/updates - Updates to writing-schema.rst and DT submitting-patches.rst to cover some frequent review comments - Clean-up SPDX tags to use 'OR' rather than 'or'" * tag 'devicetree-for-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (56 commits) dt-bindings: soc: imx: fsl,imx-anatop: add imx6q regulators of: unittest: Use for_each_child_of_node_scoped() of: Introduce for_each_*_child_of_node_scoped() to automate of_node_put() handling of: Add cleanup.h based auto release via __free(device_node) markings of: Move all FDT reserved-memory handling into of_reserved_mem.c of: Add KUnit test to confirm DTB is loaded of: unittest: treat missing of_root as error instead of fixing up x86/of: Unconditionally call unflatten_and_copy_device_tree() um: Unconditionally call unflatten_device_tree() of: Create of_root if no dtb provided by firmware of: Always unflatten in unflatten_and_copy_device_tree() dt-bindings: timer: mediatek: Convert to json-schema dt-bindings: interrupt-controller: fsl,intmux: Include power-domains support soc: fsl: qbman: Remove RESERVEDMEM_OF_DECLARE usage dt-bindings: fsl-imx-sdma: fix HDMI audio index dt-bindings: soc: imx: fsl,imx-iomuxc-gpr: add imx6 dt-bindings: soc: imx: fsl,imx-anatop: add binding dt-bindings: input: touchscreen: fsl,imx6ul-tsc convert to YAML dt-bindings: pinctrl: fsl,imx6ul-pinctrl: convert to YAML of: make for_each_property_of_node() available to to !OF ... |
||
Linus Torvalds
|
3c5d127fb5 |
MTD
The Carillo Ranch driver has been removed. Top level mtd bindings have received a couple of improvements (references, selects). The ssfdc driver received few minor adjustments. These changes come with the usual load of misc/small improvements and fixes. Raw NAND The main series brought is an update of the Broadcom support to support all BCMBCA SoCs and their specificity (ECC, write protection, configuration straps), plus a few misc fixes and changes in the main driver. Device tree updates are also part of this PR, initially because of a misunderstanding on my side. The STM32_FMC2 controller driver is also upgraded to properly support MP1 and MP25 SoCs. A new compatible is added for an Atmel flavor. Among all these feature changes, there is as well a load of continuous read related fixes, avoiding more corner conditions and clarifying the logic. Finally a few miscellaneous fixes are made to the core, the lpx32xx_mlc, fsl_lbc, Meson and Atmel controller driver, as well as final one in the Hynix vendor driver. SPI-NAND The ESMT support has been extended to match 5 bytes ID to avoid collisions. Winbond support on its side receives support for W25N04KV chips. SPI NOR SPI NOR gets the non uniform erase code cleaned. We stopped using bitmasks for erase types and flags, and instead introduced dedicated members. We then passed the SPI NOR erase map to MTD. Users can now determine the erase regions and make informed decisions on partitions size. An optional interrupt property is now described in the bindings. -----BEGIN PGP SIGNATURE----- iQEzBAABCgAdFiEE9HuaYnbmDhq/XIDIJWrqGEe9VoQFAmX0LpsACgkQJWrqGEe9 VoSOCwf8CLhMAsVs/9SrRPMwLuFUGD0IuYYsPl/+qOFXePQOVxNW8s8+DdVrQngW Oi+unW8MAizPAwMPL9AiyS12WbDVT2qyO0uwX5/efhxXwoNkk+F74icxDBBe1FOu tnvRRdqY6Zg94T4c1M9BnV5LtW+ozk+F9K8UsYvqnDOcOuaA64qmXRem63s0Jctu lnmCWHQ0+A8iL7RQ7OMbQswcYQlbnpt7p3lyvDc3dW8K3TRzUtP4nnabL8eiYhqu ho5SvbWhls91EYf/ij6+SFteV5KN4p+v1ymK2u/AqvCkIW8dAfiIhvvT8dWswpUV CyC44BFbj3/1ZeSQG4GCXzcNXwnztQ== =mSyp -----END PGP SIGNATURE----- Merge tag 'mtd/for-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux Pull MTD updates from Miquel Raynal: "MTD: - The Carillo Ranch driver has been removed - Top level mtd bindings have received a couple of improvements (references, selects) - The ssfdc driver received few minor adjustments - The usual load of misc/small improvements and fixes Raw NAND: - The main series brought is an update of the Broadcom support to support all BCMBCA SoCs and their specificity (ECC, write protection, configuration straps), plus a few misc fixes and changes in the main driver. Device tree updates are also part of this PR, initially because of a misunderstanding on my side. - The STM32_FMC2 controller driver is also upgraded to properly support MP1 and MP25 SoCs. - A new compatible is added for an Atmel flavor. - Among all these feature changes, there is as well a load of continuous read related fixes, avoiding more corner conditions and clarifying the logic. Finally a few miscellaneous fixes are made to the core, the lpx32xx_mlc, fsl_lbc, Meson and Atmel controller driver, as well as final one in the Hynix vendor driver. SPI-NAND: - The ESMT support has been extended to match 5 bytes ID to avoid collisions. Winbond support on its side receives support for W25N04KV chips. SPI NOR: - SPI NOR gets the non uniform erase code cleaned. We stopped using bitmasks for erase types and flags, and instead introduced dedicated members. We then passed the SPI NOR erase map to MTD. Users can now determine the erase regions and make informed decisions on partitions size. - An optional interrupt property is now described in the bindings" * tag 'mtd/for-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (50 commits) mtd: rawnand: Ensure continuous reads are well disabled mtd: rawnand: Constrain even more when continuous reads are enabled mtd: rawnand: brcmnand: Add support for getting ecc setting from strap mtd: rawnand: brcmnand: fix sparse warnings mtd: nand: raw: atmel: Fix comment in timings preparation mtd: rawnand: Ensure all continuous terms are always in sync mtd: rawnand: Add a helper for calculating a page index mtd: rawnand: Fix and simplify again the continuous read derivations mtd: rawnand: hynix: remove @nand_technology kernel-doc description dt-bindings: atmel-nand: add microchip,sam9x7-pmecc mtd: rawnand: brcmnand: Support write protection setting from dts mtd: rawnand: brcmnand: Add BCMBCA read data bus interface mtd: rawnand: brcmnand: Rename bcm63138 nand driver arm64: dts: broadcom: bcmbca: Update router boards arm64: dts: broadcom: bcmbca: Add NAND controller node ARM: dts: broadcom: bcmbca: Add NAND controller node mtd: spi-nor: core: correct type of i mtd: spi-nor: core: set mtd->eraseregions for non-uniform erase map mtd: spi-nor: core: get rid of SNOR_OVERLAID_REGION flag mtd: spi-nor: core: get rid of SNOR_LAST_REGION flag ... |
||
Linus Torvalds
|
2b3a4192dd |
dmaengine updates for v6.9
New support: - Allwinner H616 dma support - Renesas r8a779h0 dma controller support - TI CSI2RX dma support Updates: - Freescale edma driver updates for TCD64csupport for i.MX95 - constify of pointers and args - Yaml conversion for MediaTek High-Speed controller binding - TI k3 udma support for TX/RX DMA channels for thread IDs -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEE+vs47OPLdNbVcHzyfBQHDyUjg0cFAmX0MpIACgkQfBQHDyUj g0eMQQ//d9YF7tSxm8yNY+q4kilDm2kZCV/5DZzKbCxAZ7kQLGJF7byuDeGRWd1t mmRgVVebLUcNEH2U9Ato+db2yyNl6lTqs3ghq8dtMBCt0JQwVU2aOm/bZDCHx5lw 6j7YLYk6r0qLEI7oTX5VHg7KFXBkZvRK8LReVPW4GCKH0ERbvRC5ZjfV0pprj1k6 mV6RvNDw63EX9s5vuNzfWGHuziX6XoOUas7rNo3hwOUGp5tJcKrJVIQtRynwHrSB C+dveuqybn+a59gJSekeGqsDebx/ZH1g+r1KWzxsPHKW/Xw+fMneNj2iTyPj2L86 qGxEcedLon2LE4PvrALighBc2itOCI7NnXQm2q83lJUby7iYds1awYeHUqmOIU+N RKtcl7hfMuX2F71vMTv7QZCOR8eBIkFKkqc+iU4BD2mMm9tv6AAG5UNnxFDencQ7 1Rytw3u5N93l9lw6ISUb8WvVbumYn9EQ3A9Nr71NFpVG50e4pRhwDN2VWaKkBmM5 NbMUjzxfKdW68eRHAnWr9hGHHWzeep3e37x+DAgmPEtu99qOxnBv2L/xx1tiPrlV nv6VKNIxJOaUgmwTfXyrAHRwyOKqd4yXVRB0RY7npUPB3GELCKH+pcvom7zx4PAF h/yyNpF1VfXgevgkqNoZlX+sNNdurhhoDpiJxb2tZah9uYr8WT0= =DZRZ -----END PGP SIGNATURE----- Merge tag 'dmaengine-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine Pull dmaengine updates from Vinod Koul: "New hardware support: - Allwinner H616 dma support - Renesas r8a779h0 dma controller support - TI CSI2RX dma support Updates: - Freescale edma driver updates for TCD64csupport for i.MX95 - constify of pointers and args - Yaml conversion for MediaTek High-Speed controller binding - TI k3 udma support for TX/RX DMA channels for thread IDs: * tag 'dmaengine-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (25 commits) dmaengine: of: constify of_phandle_args in of_dma_find_controller() dmaengine: pl08x: constify pointer to char in filter function MAINTAINERS: change in AMD ptdma maintainer MAINTAINERS: adjust file entry in MEDIATEK DMA DRIVER dmaengine: idxd: constify the struct device_type usage dt-bindings: renesas,rcar-dmac: Add r8a779h0 support dt-bindings: dma: convert MediaTek High-Speed controller to the json-schema dmaengine: idxd: make dsa_bus_type const dmaengine: fsl-edma: integrate TCD64 support for i.MX95 dt-bindings: fsl-dma: fsl-edma: add fsl,imx95-edma5 compatible string dmaengine: mcf-edma: utilize edma_write_tcdreg() macro for TCD Access dmaengine: fsl-edma: add address for channel mux register in fsl_edma_chan dmaengine: fsl-edma: fix spare build warning dmaengine: fsl-edma: involve help macro fsl_edma_set(get)_tcd() dt-bindings: mmp-dma: convert to YAML dmaengine: ti: k3-psil-j721s2: Add entry for CSI2RX dmaengine: ti: k3-udma-glue: Add function to request RX chan for thread ID dmaengine: ti: k3-udma-glue: Add function to request TX chan for thread ID dmaengine: ti: k3-udma-glue: Update name for remote RX channel device dmaengine: ti: k3-udma-glue: Add function to parse channel by ID ... |
||
Linus Torvalds
|
b898db92f1 |
soundwire updates for 6.9
- Constify sdw_bus and sdw_master_type objects - use of rtd helper for better code - intel aux device remove redundant assignment -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEE+vs47OPLdNbVcHzyfBQHDyUjg0cFAmX0LhwACgkQfBQHDyUj g0cdXA/8DNcS29aL7VozqKlD1ULZQHBLYdrHzQUSQfGBVE/8c57A6VES7IXkUsJ5 LuXNPTWZmij1k4jnNF35pB2ihdNNBpCvN8KRmSoaNK1/J17NCwhqA6uOZbN0UzZT 6cZ5x0lveCBHVhpQak64ONZoJgS95k6BZ1pLLG6uq50mtxNg2872naZ3Sd5OZ59E 3aUOh7UMOGgG9sBZpq9AKYqM3JFiSKH5V8DgRNBgfYL3F2rK1GzoLieNcEPGhtsh YKbNsYUsJjjdwsKr1/9IjIdeVvXopeFEPV3+jPuBNlPIQJyDV0CJO2z1l/PD7WWc rKA0JF2TxmdCT7ki0e+INiebdCAZ2N5ljPE+xDuWbkwSHtCqeCUVkFsB/mErsGdY jGSOrxGyrkRkEnY1s7caDhL7V8Y1uf7SZ0Drj//mWqw/7FGsAJbW83iw0mLJMifH SmWmvxNnU033x+ZRMa0vbRd3ODgYaSJaW5UcIxRad9teHe+VxO+b4Ic7oD5Bgj90 tjP+sbnHFoPORsY8HI1AsA9jQojb5hbXyo7RkD+FBlqPSA2IXEswNxG3OoKaHK76 266fndX3SAEXAbna3NIYU1BjMo20VXgn2quKhuuk3fVrqBNg7PLuGgyRu/ooAhiT Oviou9ii4FuGPjinVu5G4jUq3EaMhEEQypGabYvcKKAF2Faou/8= =bsoN -----END PGP SIGNATURE----- Merge tag 'soundwire-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire Pull soundwire updates from Vinod Koul: - Constify sdw_bus and sdw_master_type objects - use of rtd helper for better code - intel aux device remove redundant assignment * tag 'soundwire-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire: soundwire: Use snd_soc_substream_to_rtd() to obtain rtd soundwire: constify the struct device_type usage soundwire: bus_type: make sdw_bus_type const soundwire: intel_auxdevice: remove redundant assignment to variable link_flags soundwire: stream: add missing const to Documentation |
||
Linus Torvalds
|
c77756d3da |
Minor changes to the I2C core. Most changes are in the drivers section
and are described by Andi in the merge commit -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEOZGx6rniZ1Gk92RdFA3kzBSgKbYFAmX0JOUACgkQFA3kzBSg KbbTCxAAgCVztwSoiyTIz51MUpgu755P2iN20daAJGBOP9osqFTGSnDVx7+sRL+p XClyoYxQBzX7lS8rE1yR1/UD+eyhuqaafx1Gn1kDtysTZ58BwSPss7z5jqsh1jko 23ItKiOHG9aezBqXIFeotHbsuhyiTuyvuzpxsXEDyr4lNQMxVzvYRhF2evOnGB1v 4rPfbKKUfoLFxarvb/OK1CK+nzQeptOytu3C9DuscuPtgqNmFUYuAKGnGCsPjWjq nHX/N5n80PsTTCXAMR+3L+HuJFK5vHMwmMgvhGN1z0WhKCStthuHIZSuwSBuTjSB SaXvAS+xO5mGC7DQFiDFmwZupCYokrrk1AqdtSNYNE4IDGZEVbYbnNK3romrJC4Q g43CxLCBGVvAxV9wOYPKwW4M8HkrRM3GaQEJwAk2Cmm+e1orQ9UJAwvp27hiLwYI t4PmhR/mNHjJL09CnRL/cPkxW3sdeEbqu/3aKUAHi1s27FOcpw1gWYBRJJfikhE7 cyHc+crcjmTyeSZgHNrkP8u9cWpr4ptIbsgiExFQUqaEORwCjlSMxNtE2YKRqLcs +9iTOjoKEHPEX1gSco8Ni++bFMGmZ9aa9/Z2Keof7UyNn1D845Ykv9DtKZOgV9rJ 4Kmb6ZAz3mIheV0iOm5ylMoweCzyLXQ88JymMb0oQ7OssWN6BEw= =Hm22 -----END PGP SIGNATURE----- Merge tag 'i2c-for-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c updates from Wolfram Sang: "Minor changes to the I2C core. Most changes are in drivers: The i801 and designware drivers received most of the changes, including refactorings and some additions. Recovery changes for the iMX and iMX-LPI2C are now utilizing the generic i2c support. The Cadence driver now supports system suspend and resume. The hisi, mpc, sh_mobile, and npcm drivers have undergone some cleanups and improvements. Meanwhile, Uwe continues his work on converting the "remove" callback to become a void function. The pca954x mux driver now supports additional configurations, such as isolating faulty channels and flushing stuck buses, among others. Support has been added for Renesas r8a779h0, i.MX95 LPI2C, and Microchip sam9x7. Meanwhile, Geert lays the groundwork for the upcoming R-Car Gen4" * tag 'i2c-for-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (34 commits) i2c: sprd: Convert to platform remove callback returning void Documentation: i2c: Document that client auto-detection is a legacy mechanism i2c: remove redundant condition i2c: rcar: Prepare for the advent of ARCH_RCAR_GEN4 i2c: imx-lpi2c: add generic GPIO recovery for LPI2C i2c: cadence: Add system suspend and resume PM support i2c: mpc: remove outdated macro i2c: mpc: use proper binding for transfer timeouts dt-bindings: i2c: mpc: use proper binding for transfer timeouts i2c: smbus: Prepare i2c_register_spd for usage on muxed segments i2c: constify the struct device_type usage i2c: designware: Implement generic polling mode code for Wangxun 10Gb NIC i2c: designware: Fix RX FIFO depth define on Wangxun 10Gb NIC i2c: designware: Move interrupt handling functions before i2c_dw_xfer() i2c: designware: Use accessors to DW_IC_INTR_MASK register i2c: designware: Do not enable interrupts shortly in polling mode i2c: designware: Uniform initialization flow for polling mode dt-bindings: i2c: at91: Add sam9x7 compatible string dt-bindings: i2c: imx-lpi2c: add i.MX95 LPI2C i2c: Remove redundant comparison in npcm_i2c_reg_slave ... |
||
Linus Torvalds
|
6dff52b828 |
Not a ton of stuff happening in the clk framework in this pull request. We got
some more devm helpers and we seem to be going in the direction of "just turn this stuff on already and leave me alone!" with the addition of a devm_clk_bulk_get_all_enable() API. I'm hoping that we can make that into a genpd that drivers attach instead, but this API should help drivers simplify in the meantime. Outside of the devm wrappers, we've got the usual clk driver updates that are dominated by the major phone SoC vendors (Samsung and Qualcomm) and the non-critical driver fixes for things like incorrect topology descriptions and wrong registers or bit fields. More details are below, but I'd say that it looks pretty ordinary. The only thing that really jumps out at me is the Renesas clk driver that's ignoring clks that are assigned to remote processors in DeviceTree. That's a new feature that they're using to avoid marking clks as CLK_IGNORE_UNUSED based on the configuration of the system. Core: - Increase dev_id len for clkdev lookups - Add a devm_clk_bulk_get_all_enable() API to get and enable all clks for a device - Add a devm variant of clk_rate_exclusive_get() New Drivers: - Display, TCSR, GPU, and Camera clock controllers for Qualcomm's X1 Elite SoC - Google GS101 PERIC0 and PERIC1 clock controllers - Exynos850 PDMA clocks - Exynos850 CPU cluster 0 and 1 (CMU_CPUCLK0/CMU_CPUCLK1) clock controllers Removed Drivers: - Remove the unused Qualcomm sc7180 modem clk driver Updates: - Fix some static checker errors in the Hisilicon clk driver - Polarfire MSSPLL hardware has 4 output clocks (the driver supported previously only one output); each of these 4 outputs feed dividers and the output of each divider feed individual hardware blocks (e.g. CAN, Crypto, eMMC); individual hardware block drivers need to control their clocks thus clock driver support was added for all MSSPLL output clocks - Typo fixes in the Qualcomm IPQ5018 GCC driver - Add "qdss_at" clk on Qualcomm IPQ6018, needed for WiFi - Properly terminate frequency tables in different Qualcomm clk drivers - Add MDSS, crypto, and SDCC resets on Qualcomm MSM8953 - Add missing UFS CLKREF clks on Qualcomm SC8180X - Avoid significant delays during boot by adding a softdep on rpmhpd to Qualcomm SDM845 gcc driver - Add QUPv3 RCGS w/ DFS and video resets to Qualcomm SM8150 GCC driver - Fix the custom GPU GX "do-nothing" method in the Qualcomm GDSC driver - Add an external regulator to GX GDSC on Qualcomm SC8280XP GPU clk driver - Switch display, GPU, video, and camera Qualcomm clk drivers to module_platform_driver() - Set a longer delay for Venus resets on many Qualcomm SoCs - Correct the GDSC wait times in the Qualcomm SDM845 display clk driver - Fix clock listing Oops on Amlogic axg - New pll-rate for Rockchip rk3568 - i2s rate improvements for Rockchip rk3399 - Rockchip rk3588 syscon clock fixes and removal of overall clock-number from the rk3588 binding header - A prerequisite for later improvements to the Rockchip rk3588 linked clocks - Minor clean-ups and error handling improvements in both composite-8m and SCU i.MX clock drivers - Fix for SAI_MCLK_SEL definition for i.MX8MP - Register the Samsung CMU MISC clock controller earlier, so the Multi Core Timer clocksource can use it on Google GS101 - Propagate Exynos850 SPI IPCLK rate change to parents, so the SPI will get proper clock rates - Refactor the generic Samsung CPU clock controllers code, preparing it for supporting Exynos850 CPU clocks - Fix some clk kerneldoc warnings - Add Ethernet, SDHI, DMA, and HyperFLASH/QSPI (RPC-IF) clocks on Renesas R-Car V4M - Ignore all clocks which are assigned to a non-Linux system in the Renesas clk driver - Add watchdog clock on Renesas RZ/G3S - Add camera (CRU) clock and reset on Renesas RZ/G2UL - Add support for the Renesas R-Car V4M (R8A779H0) SoC - Convert some clk bindings to YAML so they can be validated -----BEGIN PGP SIGNATURE----- iQJFBAABCAAvFiEE9L57QeeUxqYDyoaDrQKIl8bklSUFAmXzUpURHHNib3lkQGtl cm5lbC5vcmcACgkQrQKIl8bklSXEvQ/+K0Llv6Jgs/VJkg086qE7z82KvIQRUasi Rhxtq8P9DS4KYBd1BB0Wwsrh2CyW9ZWUn0unQ1ZtbxCHKE1lweYb4UkafNamRynT cKlXR5wGNtbHUF6Gmdjw+lkuF6pxj3ZcmV47bQyhLMctndWn434sIn3gpv2pTYF2 Q/ZwhhiS2ZQU1hdpgHwe9iIRJ7QcGlWKyhRx9m5QSRIL7eZFiUvBcYNAdoSa1ovr FZOSUAUaxxDu16VrC8mPjaMQ3lDqz8DVSw3i1cDsMdYHbBidzlNLzBH9L+qFgXng cYqYR3dlJ6HuXr9wwwe5X3Pm01VZ6Askl16h9tUnZgtZuSuxMPeWMw2brZZPNFOn L0SvHdLFj4MzyhgXWtQughttzdOwaRP9lNZNZwchMU5aEU0e3GDeBUBeJ0CRAAqD DHRYQW3vDlIG4mhrr54GgQ5XjeHqj9W5OrGU/dWmBp+/e1wB3MB47UJf0GJ7F9kA BNvMFtk9hRJkmqsKY93mWpKOe3su2Fl/1vlhK9Tw5V8h/GzBnEsVDUNRYaRaN+wd gYTEo73T2FJ4OSYncRDeSPXTmKeI2+4sa1XJKx8rasEZNOR2V3DH/8bMXZhjSbzL nZDh+eu0uyS6+xVReE6349ivSPyNDEXO0IbI7yq7jjSYB+LxW49O2xMeoYuNSjtz RxKHQr0skqs= =rRIa -----END PGP SIGNATURE----- Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "Not a ton of stuff happening in the clk framework. We got some more devm helpers and we seem to be going in the direction of "just turn this stuff on already and leave me alone!" with the addition of a devm_clk_bulk_get_all_enable() API. I'm hoping that we can make that into a pmdomain that drivers attach instead, but this API should help drivers simplify in the meantime. Outside of the devm wrappers, we've got the usual clk driver updates that are dominated by the major phone SoC vendors (Samsung and Qualcomm) and the non-critical driver fixes for things like incorrect topology descriptions and wrong registers or bit fields. More details are below, but I'd say that it looks pretty ordinary. The only thing that really jumps out at me is the Renesas clk driver that's ignoring clks that are assigned to remote processors in DeviceTree. That's a new feature that they're using to avoid marking clks as CLK_IGNORE_UNUSED based on the configuration of the system. Core: - Increase dev_id len for clkdev lookups - Add a devm_clk_bulk_get_all_enable() API to get and enable all clks for a device - Add a devm variant of clk_rate_exclusive_get() New Drivers: - Display, TCSR, GPU, and Camera clock controllers for Qualcomm's X1 Elite SoC - Google GS101 PERIC0 and PERIC1 clock controllers - Exynos850 PDMA clocks - Exynos850 CPU cluster 0 and 1 (CMU_CPUCLK0/CMU_CPUCLK1) clock controllers Removed Drivers: - Remove the unused Qualcomm sc7180 modem clk driver Updates: - Fix some static checker errors in the Hisilicon clk driver - Polarfire MSSPLL hardware has 4 output clocks (the driver supported previously only one output); each of these 4 outputs feed dividers and the output of each divider feed individual hardware blocks (e.g. CAN, Crypto, eMMC); individual hardware block drivers need to control their clocks thus clock driver support was added for all MSSPLL output clocks - Typo fixes in the Qualcomm IPQ5018 GCC driver - Add "qdss_at" clk on Qualcomm IPQ6018, needed for WiFi - Properly terminate frequency tables in different Qualcomm clk drivers - Add MDSS, crypto, and SDCC resets on Qualcomm MSM8953 - Add missing UFS CLKREF clks on Qualcomm SC8180X - Avoid significant delays during boot by adding a softdep on rpmhpd to Qualcomm SDM845 gcc driver - Add QUPv3 RCGS w/ DFS and video resets to Qualcomm SM8150 GCC driver - Fix the custom GPU GX "do-nothing" method in the Qualcomm GDSC driver - Add an external regulator to GX GDSC on Qualcomm SC8280XP GPU clk driver - Switch display, GPU, video, and camera Qualcomm clk drivers to module_platform_driver() - Set a longer delay for Venus resets on many Qualcomm SoCs - Correct the GDSC wait times in the Qualcomm SDM845 display clk driver - Fix clock listing Oops on Amlogic axg - New pll-rate for Rockchip rk3568 - i2s rate improvements for Rockchip rk3399 - Rockchip rk3588 syscon clock fixes and removal of overall clock-number from the rk3588 binding header - A prerequisite for later improvements to the Rockchip rk3588 linked clocks - Minor clean-ups and error handling improvements in both composite-8m and SCU i.MX clock drivers - Fix for SAI_MCLK_SEL definition for i.MX8MP - Register the Samsung CMU MISC clock controller earlier, so the Multi Core Timer clocksource can use it on Google GS101 - Propagate Exynos850 SPI IPCLK rate change to parents, so the SPI will get proper clock rates - Refactor the generic Samsung CPU clock controllers code, preparing it for supporting Exynos850 CPU clocks - Fix some clk kerneldoc warnings - Add Ethernet, SDHI, DMA, and HyperFLASH/QSPI (RPC-IF) clocks on Renesas R-Car V4M - Ignore all clocks which are assigned to a non-Linux system in the Renesas clk driver - Add watchdog clock on Renesas RZ/G3S - Add camera (CRU) clock and reset on Renesas RZ/G2UL - Add support for the Renesas R-Car V4M (R8A779H0) SoC - Convert some clk bindings to YAML so they can be validated" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (150 commits) clk: zynq: Prevent null pointer dereference caused by kmalloc failure clk: fractional-divider: Use bit operations consistently clk: fractional-divider: Move mask calculations out of lock clk: Fix clk_core_get NULL dereference clk: starfive: jh7110-vout: Convert to platform remove callback returning void clk: starfive: jh7110-isp: Convert to platform remove callback returning void clk: imx: imx8-acm: Convert to platform remove callback returning void clk: qcom: gcc-ipq5018: fix register offset for GCC_UBI0_AXI_ARES reset clk: qcom: gcc-ipq5018: fix 'halt_reg' offset of 'gcc_pcie1_pipe_clk' clk: qcom: gcc-ipq5018: fix 'enable_reg' offset of 'gcc_gmac0_sys_clk' clk: qcom: camcc-x1e80100: Fix missing DT_IFACE enum in x1e80100 camcc clk: qcom: mmcc-msm8974: fix terminating of frequency table arrays clk: qcom: mmcc-apq8084: fix terminating of frequency table arrays clk: qcom: camcc-sc8280xp: fix terminating of frequency table arrays clk: qcom: gcc-ipq9574: fix terminating of frequency table arrays clk: qcom: gcc-ipq8074: fix terminating of frequency table arrays clk: qcom: gcc-ipq6018: fix terminating of frequency table arrays clk: qcom: gcc-ipq5018: fix terminating of frequency table arrays clk: mediatek: clk-mt8173-apmixedsys: Use common error handling code in clk_mt8173_apmixed_probe() clk: Add a devm variant of clk_rate_exclusive_get() ... |
||
Linus Torvalds
|
eb7cca1faf |
media updates for v6.9-rc1
-----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEE+QmuaPwR3wnBdVwACF8+vY7k4RUFAmXz6uoACgkQCF8+vY7k 4RX3MQ/+LOHOMkufbq9qxLtbq9/2Wrdzym0q6j2RzD4r2ou4+DPJS8kc7c4eX02M 9G37SL5LbLVT5OjMEP7ShZtBSmbAoqqxJOPxCWII32M3PbcV0QTYrTJg4LdyLry+ vZz1KqYqMOaCJk5oy41RrYwwB+dhYu19gXSbw73sXoxOI24m/MAErsf2WLSk/ojk lcz7UIOWWLOXH08im6+GoqFbMWv6j8a72J7mXdguu+k+dBou/TkPnND7dq5wC17S dRLzQyYUm0fRIya/Hnoj/Cd0yUn/8NVPogG8Om/Nqt8BvCLZEihvKSVc8NJukavD /3LlZ2oj39NzV6oRwpUdAwHFH7KXuEZM/aQX06Wl34AfXXpFleTBQD40kSo/AHIq Kg9GGL9Z2V7F1pHrx4VlouUpfGMS0lZig4oL70ZrFmz6jWVDE/Vg4xN9mOl6RraX S43fHP7abLSg8XvKDX+Gdb5/NzA3Zkom5EdIFLPEd2DBCS3n59KkFXQ3AqVm4XaK HV8WnIOw4qcmH4H/8yxUpLCd/s7ACNuT72pws9YWCZOGD+Wv2tHU21aFiCOiB5ol VlxBxttez3c3Il8UWJaaApCqM9Mn7bMMB/KMUSJzUt785cK0sS0/4D6cbYE0Zdqr 9IancZHiKMzbN14rNAqjUX8sqNNzPtVPDISLuXsN7MvzfjlOFLE= =YxyV -----END PGP SIGNATURE----- Merge tag 'media/v6.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: - DVB budget legacy API was finally documented. It took only 20+ years to get some documentation about it... - hantro driver has gained support for STM32MP25 VDEC/VENC - rkisp1 has gained support for i.MX8MP - atomisp got rid of two items from its todo list. Still 5 items pending for moving it out of staging - lots of driver fixes, cleanups and improvements * tag 'media/v6.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (252 commits) media: rcar-isp: Disallow unbind of devices media: usbtv: Remove useless locks in usbtv_video_free() media: mediatek: vcodec: avoid -Wcast-function-type-strict warning media: ttpci: fix two memleaks in budget_av_attach media: go7007: fix a memleak in go7007_load_encoder media: dvb-frontends: avoid stack overflow warnings with clang media: pvrusb2: fix uaf in pvr2_context_set_notify media: usb: s2255: Refactor s2255_get_fx2fw media: ti: j721e-csi2rx: Convert to platform remove callback returning void media: stm32-dcmipp: Convert to platform remove callback returning void media: nxp: imx8-isi: Convert to platform remove callback returning void media: nuvoton: Convert to platform remove callback returning void media: chips-media: wave5: Convert to platform remove callback returning void media: chips-media: wave5: Remove unnecessary semicolons media: i2c: imx290: Fix IMX920 typo media: platform: replace of_graph_get_next_endpoint() media: i2c: replace of_graph_get_next_endpoint() media: ivsc: csi: Make use of sub-device state media: ivsc: csi: Swap SINK and SOURCE pads media: ipu-bridge: Serialise calls to IPU bridge init ... |
||
Alexander Stein
|
7e98fe49f8 |
dt-bindings: soc: imx: fsl,imx-anatop: add imx6q regulators
imx6q has additional regulators compared to imx6ul. Add them to the list of allowed patterns. Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20240314145953.2957313-1-alexander.stein@ew.tq-group.com Signed-off-by: Rob Herring <robh@kernel.org> |
||
Linus Torvalds
|
6ce8b2ce0d |
fuse update for 6.9
-----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQSQHSd0lITzzeNWNm3h3BK/laaZPAUCZfLjeQAKCRDh3BK/laaZ PBYQAQDqYZzq91Kn5jdvjaSd+6I/+x7MDLOIP5hPX0HJLuBxWAEAqENoo4Of0GTC ltW7DKrQy9E3CMp6VKSLVJPN4BYP9gk= =GvOE -----END PGP SIGNATURE----- Merge tag 'fuse-update-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse Pull fuse updates from Miklos Szeredi: - Add passthrough mode for regular file I/O. This allows performing read and write (also via memory maps) on a backing file without incurring the overhead of roundtrips to userspace. For now this is only allowed to privileged servers, but this limitation will go away in the future (Amir Goldstein) - Fix interaction of direct I/O mode with memory maps (Bernd Schubert) - Export filesystem tags through sysfs for virtiofs (Stefan Hajnoczi) - Allow resending queued requests for server crash recovery (Zhao Chen) - Misc fixes and cleanups * tag 'fuse-update-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse: (38 commits) fuse: get rid of ff->readdir.lock fuse: remove unneeded lock which protecting update of congestion_threshold fuse: Fix missing FOLL_PIN for direct-io fuse: remove an unnecessary if statement fuse: Track process write operations in both direct and writethrough modes fuse: Use the high bit of request ID for indicating resend requests fuse: Introduce a new notification type for resend pending requests fuse: add support for explicit export disabling fuse: __kuid_val/__kgid_val helpers in fuse_fill_attr_from_inode() fuse: fix typo for fuse_permission comment fuse: Convert fuse_writepage_locked to take a folio fuse: Remove fuse_writepage virtio_fs: remove duplicate check if queue is broken fuse: use FUSE_ROOT_ID in fuse_get_root_inode() fuse: don't unhash root fuse: fix root lookup with nonzero generation fuse: replace remaining make_bad_inode() with fuse_make_bad() virtiofs: drop __exit from virtio_fs_sysfs_exit() fuse: implement passthrough for mmap fuse: implement splice read/write passthrough ... |
||
Linus Torvalds
|
32a50540c3 |
bcachefs updates for 6.9
- Subvolume children btree; this is needed for providing a userspace interface for walking subvolumes, which will come later - Lots of improvements to directory structure checking - Improved journal pipelining, significantly improving performance on high iodepth write workloads - Discard path improvements: the discard path is more efficient, and no longer flushes the journal unnecessarily - Buffered write path can now avoid taking the inode lock - new mm helper: memalloc_flags_{save|restore} - mempool now does kvmalloc mempools -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEKnAFLkS8Qha+jvQrE6szbY3KbnYFAmXycEcACgkQE6szbY3K bnYUTg/+K4Nv2EdAqOCyHRTKaF2OgJDUb25ZDmbGpfT1XyPrNB7/+CxHqSdEP7/e FVuhtP61vnQAImDv82u9iZiab/TnuCZPUrjSobFEvrWYoGRtP9Bm9MyYB28NzmMa AXGmS4yJGVwtxxrFNxZP98IbiHYiHSoYbkqxX2E5VgLag8Ru8peb7oD0Ro3zw0rb z+6UM/seJ7on5i/9IJEMKKXFVEoZC2J5DAVoe1TghG2kgOw3cKu5OUdltLPOY5jL jkm5J5wa6Ep46nufHat92yiMxXIQrf4U9LkXxzTi5ThoSmt+Af2qXcBjqTTVqd2D 1dGxj+UG8iu4DCCbQC6EA7J5EMvxfJM0+9lk1ULUgxUs3X69co6nlI6XH1fwEMqk KpIqd35+Y/IYgogt9ioXI0dtXyL7dbaTVt6NZhc9SaPGPX+C2V0+l4bqToFdNaPH 0KATjjyQaJRE4ZFIjr6GliYOtKWDLi/HPEyoBivniUn7cF5vjSvti+cSQwNDSPpa 6jOd5Y923Iq9ZqDAPM3+mvTH8nNaaf2T2fmbPNrc5pdWbha9bGwOU71zvKHNFGm/ 66ZsnwhKSk+uwglTMZHPKSkJJXUYAHESw3slQtEWHZVlliArc55+pBHwE00bvRt7 KHUUqkqXBUPzbp/kdZGylMAdH9+8j9TE5QJ2RaoryFm/eCfexmI= =6xnj -----END PGP SIGNATURE----- Merge tag 'bcachefs-2024-03-13' of https://evilpiepirate.org/git/bcachefs Pull bcachefs updates from Kent Overstreet: - Subvolume children btree; this is needed for providing a userspace interface for walking subvolumes, which will come later - Lots of improvements to directory structure checking - Improved journal pipelining, significantly improving performance on high iodepth write workloads - Discard path improvements: the discard path is more efficient, and no longer flushes the journal unnecessarily - Buffered write path can now avoid taking the inode lock - new mm helper: memalloc_flags_{save|restore} - mempool now does kvmalloc mempools * tag 'bcachefs-2024-03-13' of https://evilpiepirate.org/git/bcachefs: (128 commits) bcachefs: time_stats: shrink time_stat_buffer for better alignment bcachefs: time_stats: split stats-with-quantiles into a separate structure bcachefs: mean_and_variance: put struct mean_and_variance_weighted on a diet bcachefs: time_stats: add larger units bcachefs: pull out time_stats.[ch] bcachefs: reconstruct_alloc cleanup bcachefs: fix bch_folio_sector padding bcachefs: Fix btree key cache coherency during replay bcachefs: Always flush write buffer in delete_dead_inodes() bcachefs: Fix order of gc_done passes bcachefs: fix deletion of indirect extents in btree_gc bcachefs: Prefer struct_size over open coded arithmetic bcachefs: Kill unused flags argument to btree_split() bcachefs: Check for writing superblocks with nonsense member seq fields bcachefs: fix bch2_journal_buf_to_text() lib/generic-radix-tree.c: Make nodes more reasonably sized bcachefs: copy_(to|from)_user_errcode() bcachefs: Split out bkey_types.h bcachefs: fix lost journal buf wakeup due to improved pipelining bcachefs: intercept mountoption value for bool type ... |
||
Miquel Raynal
|
09888e973c |
Raw NAND
The main series brought is an update of the Broadcom support to support all BCMBCA SoCs and their specificity (ECC, write protection, configuration straps), plus a few misc fixes and changes in the main driver. Device tree updates are also part of this PR, initially because of a misunderstanding on my side. The STM32_FMC2 controller driver is also upgraded to properly support MP1 and MP25 SoCs. A new compatible is added for an Atmel flavor. Among all these feature changes, there is as well a load of continuous read related fixes, avoiding more corner conditions and clarifying the logic. Finally a few miscellaneous fixes are made to the core, the lpx32xx_mlc, fsl_lbc, Meson and Atmel controller driver, as well as final one in the Hynix vendor driver. SPI-NAND The ESMT support has been extended to match 5 bytes ID to avoid collisions. Winbond support on its side receives support for W25N04KV chips. -----BEGIN PGP SIGNATURE----- iQEzBAABCgAdFiEE9HuaYnbmDhq/XIDIJWrqGEe9VoQFAmXzgv4ACgkQJWrqGEe9 VoTwUAgAqwzuaAbhMuHABS2IJnn9KZHCo4f2goXhtrtRP2oDSgzsT8Yke2vfJTIx KBtjWRYdp5n8GRSmDmO1n/oNnKdjkzbOhP0ow8aZqhKYtjQ7O0xxd4gxQu3gCoVz ypWq3tpMkKH0MyD8d+HulFhldMmyGv5BqXeioLi2azeALCbpgVcGAHaMxUlRB/p3 iM3GtBr9hUbai6HlynnPsiAAmyUc1gvGGHJ8t2ShjaW5LzK7uBqJLhSVizfP8I6g N6l0C+KKwFmXlprtgMcg/HjW2QWKOyeqrhmgTzcJIHRiPjySnmfOVeHBLu6y+1wl MC3BC5kHNSmOfuU76/93LUQUwkWvUA== =TaNQ -----END PGP SIGNATURE----- Merge tag 'nand/for-6.9' into mtd/next Raw NAND The main series brought is an update of the Broadcom support to support all BCMBCA SoCs and their specificity (ECC, write protection, configuration straps), plus a few misc fixes and changes in the main driver. Device tree updates are also part of this PR, initially because of a misunderstanding on my side. The STM32_FMC2 controller driver is also upgraded to properly support MP1 and MP25 SoCs. A new compatible is added for an Atmel flavor. Among all these feature changes, there is as well a load of continuous read related fixes, avoiding more corner conditions and clarifying the logic. Finally a few miscellaneous fixes are made to the core, the lpx32xx_mlc, fsl_lbc, Meson and Atmel controller driver, as well as final one in the Hynix vendor driver. SPI-NAND The ESMT support has been extended to match 5 bytes ID to avoid collisions. Winbond support on its side receives support for W25N04KV chips. |
||
Dan Williams
|
ed1ff2fba7 |
Merge branch 'for-6.9/cxl-einj' into for-6.9/cxl
Pick up documentation build fix for v6.9. |
||
Linus Torvalds
|
e5eb28f6d1 |
- Kuan-Wei Chiu has developed the well-named series "lib min_heap: Min
heap optimizations". - Kuan-Wei Chiu has also sped up the library sorting code in the series "lib/sort: Optimize the number of swaps and comparisons". - Alexey Gladkov has added the ability for code running within an IPC namespace to alter its IPC and MQ limits. The series is "Allow to change ipc/mq sysctls inside ipc namespace". - Geert Uytterhoeven has contributed some dhrystone maintenance work in the series "lib: dhry: miscellaneous cleanups". - Ryusuke Konishi continues nilfs2 maintenance work in the series "nilfs2: eliminate kmap and kmap_atomic calls" "nilfs2: fix kernel bug at submit_bh_wbc()" - Nathan Chancellor has updated our build tools requirements in the series "Bump the minimum supported version of LLVM to 13.0.1". - Muhammad Usama Anjum continues with the selftests maintenance work in the series "selftests/mm: Improve run_vmtests.sh". - Oleg Nesterov has done some maintenance work against the signal code in the series "get_signal: minor cleanups and fix". Plus the usual shower of singleton patches in various parts of the tree. Please see the individual changelogs for details. -----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZfMnvgAKCRDdBJ7gKXxA jjKMAP4/Upq07D4wjkMVPb+QrkipbbLpdcgJ++q3z6rba4zhPQD+M3SFriIJk/Xh tKVmvihFxfAhdDthseXcIf1nBjMALwY= =8rVc -----END PGP SIGNATURE----- Merge tag 'mm-nonmm-stable-2024-03-14-09-36' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull non-MM updates from Andrew Morton: - Kuan-Wei Chiu has developed the well-named series "lib min_heap: Min heap optimizations". - Kuan-Wei Chiu has also sped up the library sorting code in the series "lib/sort: Optimize the number of swaps and comparisons". - Alexey Gladkov has added the ability for code running within an IPC namespace to alter its IPC and MQ limits. The series is "Allow to change ipc/mq sysctls inside ipc namespace". - Geert Uytterhoeven has contributed some dhrystone maintenance work in the series "lib: dhry: miscellaneous cleanups". - Ryusuke Konishi continues nilfs2 maintenance work in the series "nilfs2: eliminate kmap and kmap_atomic calls" "nilfs2: fix kernel bug at submit_bh_wbc()" - Nathan Chancellor has updated our build tools requirements in the series "Bump the minimum supported version of LLVM to 13.0.1". - Muhammad Usama Anjum continues with the selftests maintenance work in the series "selftests/mm: Improve run_vmtests.sh". - Oleg Nesterov has done some maintenance work against the signal code in the series "get_signal: minor cleanups and fix". Plus the usual shower of singleton patches in various parts of the tree. Please see the individual changelogs for details. * tag 'mm-nonmm-stable-2024-03-14-09-36' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (77 commits) nilfs2: prevent kernel bug at submit_bh_wbc() nilfs2: fix failure to detect DAT corruption in btree and direct mappings ocfs2: enable ocfs2_listxattr for special files ocfs2: remove SLAB_MEM_SPREAD flag usage assoc_array: fix the return value in assoc_array_insert_mid_shortcut() buildid: use kmap_local_page() watchdog/core: remove sysctl handlers from public header nilfs2: use div64_ul() instead of do_div() mul_u64_u64_div_u64: increase precision by conditionally swapping a and b kexec: copy only happens before uchunk goes to zero get_signal: don't initialize ksig->info if SIGNAL_GROUP_EXIT/group_exec_task get_signal: hide_si_addr_tag_bits: fix the usage of uninitialized ksig get_signal: don't abuse ksig->info.si_signo and ksig->sig const_structs.checkpatch: add device_type Normalise "name (ad@dr)" MODULE_AUTHORs to "name <ad@dr>" dyndbg: replace kstrdup() + strchr() with kstrdup_and_replace() list: leverage list_is_head() for list_entry_is_head() nilfs2: MAINTAINERS: drop unreachable project mirror site smp: make __smp_processor_id() 0-argument macro fat: fix uninitialized field in nostale filehandles ... |
||
Linus Torvalds
|
902861e34c |
- Sumanth Korikkar has taught s390 to allocate hotplug-time page frames
from hotplugged memory rather than only from main memory. Series "implement "memmap on memory" feature on s390". - More folio conversions from Matthew Wilcox in the series "Convert memcontrol charge moving to use folios" "mm: convert mm counter to take a folio" - Chengming Zhou has optimized zswap's rbtree locking, providing significant reductions in system time and modest but measurable reductions in overall runtimes. The series is "mm/zswap: optimize the scalability of zswap rb-tree". - Chengming Zhou has also provided the series "mm/zswap: optimize zswap lru list" which provides measurable runtime benefits in some swap-intensive situations. - And Chengming Zhou further optimizes zswap in the series "mm/zswap: optimize for dynamic zswap_pools". Measured improvements are modest. - zswap cleanups and simplifications from Yosry Ahmed in the series "mm: zswap: simplify zswap_swapoff()". - In the series "Add DAX ABI for memmap_on_memory", Vishal Verma has contributed several DAX cleanups as well as adding a sysfs tunable to control the memmap_on_memory setting when the dax device is hotplugged as system memory. - Johannes Weiner has added the large series "mm: zswap: cleanups", which does that. - More DAMON work from SeongJae Park in the series "mm/damon: make DAMON debugfs interface deprecation unignorable" "selftests/damon: add more tests for core functionalities and corner cases" "Docs/mm/damon: misc readability improvements" "mm/damon: let DAMOS feeds and tame/auto-tune itself" - In the series "mm/mempolicy: weighted interleave mempolicy and sysfs extension" Rakie Kim has developed a new mempolicy interleaving policy wherein we allocate memory across nodes in a weighted fashion rather than uniformly. This is beneficial in heterogeneous memory environments appearing with CXL. - Christophe Leroy has contributed some cleanup and consolidation work against the ARM pagetable dumping code in the series "mm: ptdump: Refactor CONFIG_DEBUG_WX and check_wx_pages debugfs attribute". - Luis Chamberlain has added some additional xarray selftesting in the series "test_xarray: advanced API multi-index tests". - Muhammad Usama Anjum has reworked the selftest code to make its human-readable output conform to the TAP ("Test Anything Protocol") format. Amongst other things, this opens up the use of third-party tools to parse and process out selftesting results. - Ryan Roberts has added fork()-time PTE batching of THP ptes in the series "mm/memory: optimize fork() with PTE-mapped THP". Mainly targeted at arm64, this significantly speeds up fork() when the process has a large number of pte-mapped folios. - David Hildenbrand also gets in on the THP pte batching game in his series "mm/memory: optimize unmap/zap with PTE-mapped THP". It implements batching during munmap() and other pte teardown situations. The microbenchmark improvements are nice. - And in the series "Transparent Contiguous PTEs for User Mappings" Ryan Roberts further utilizes arm's pte's contiguous bit ("contpte mappings"). Kernel build times on arm64 improved nicely. Ryan's series "Address some contpte nits" provides some followup work. - In the series "mm/hugetlb: Restore the reservation" Breno Leitao has fixed an obscure hugetlb race which was causing unnecessary page faults. He has also added a reproducer under the selftest code. - In the series "selftests/mm: Output cleanups for the compaction test", Mark Brown did what the title claims. - Kinsey Ho has added the series "mm/mglru: code cleanup and refactoring". - Even more zswap material from Nhat Pham. The series "fix and extend zswap kselftests" does as claimed. - In the series "Introduce cpu_dcache_is_aliasing() to fix DAX regression" Mathieu Desnoyers has cleaned up and fixed rather a mess in our handling of DAX on archiecctures which have virtually aliasing data caches. The arm architecture is the main beneficiary. - Lokesh Gidra's series "per-vma locks in userfaultfd" provides dramatic improvements in worst-case mmap_lock hold times during certain userfaultfd operations. - Some page_owner enhancements and maintenance work from Oscar Salvador in his series "page_owner: print stacks and their outstanding allocations" "page_owner: Fixup and cleanup" - Uladzislau Rezki has contributed some vmalloc scalability improvements in his series "Mitigate a vmap lock contention". It realizes a 12x improvement for a certain microbenchmark. - Some kexec/crash cleanup work from Baoquan He in the series "Split crash out from kexec and clean up related config items". - Some zsmalloc maintenance work from Chengming Zhou in the series "mm/zsmalloc: fix and optimize objects/page migration" "mm/zsmalloc: some cleanup for get/set_zspage_mapping()" - Zi Yan has taught the MM to perform compaction on folios larger than order=0. This a step along the path to implementaton of the merging of large anonymous folios. The series is named "Enable >0 order folio memory compaction". - Christoph Hellwig has done quite a lot of cleanup work in the pagecache writeback code in his series "convert write_cache_pages() to an iterator". - Some modest hugetlb cleanups and speedups in Vishal Moola's series "Handle hugetlb faults under the VMA lock". - Zi Yan has changed the page splitting code so we can split huge pages into sizes other than order-0 to better utilize large folios. The series is named "Split a folio to any lower order folios". - David Hildenbrand has contributed the series "mm: remove total_mapcount()", a cleanup. - Matthew Wilcox has sought to improve the performance of bulk memory freeing in his series "Rearrange batched folio freeing". - Gang Li's series "hugetlb: parallelize hugetlb page init on boot" provides large improvements in bootup times on large machines which are configured to use large numbers of hugetlb pages. - Matthew Wilcox's series "PageFlags cleanups" does that. - Qi Zheng's series "minor fixes and supplement for ptdesc" does that also. S390 is affected. - Cleanups to our pagemap utility functions from Peter Xu in his series "mm/treewide: Replace pXd_large() with pXd_leaf()". - Nico Pache has fixed a few things with our hugepage selftests in his series "selftests/mm: Improve Hugepage Test Handling in MM Selftests". - Also, of course, many singleton patches to many things. Please see the individual changelogs for details. -----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZfJpPQAKCRDdBJ7gKXxA joxeAP9TrcMEuHnLmBlhIXkWbIR4+ki+pA3v+gNTlJiBhnfVSgD9G55t1aBaRplx TMNhHfyiHYDTx/GAV9NXW84tasJSDgA= =TG55 -----END PGP SIGNATURE----- Merge tag 'mm-stable-2024-03-13-20-04' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull MM updates from Andrew Morton: - Sumanth Korikkar has taught s390 to allocate hotplug-time page frames from hotplugged memory rather than only from main memory. Series "implement "memmap on memory" feature on s390". - More folio conversions from Matthew Wilcox in the series "Convert memcontrol charge moving to use folios" "mm: convert mm counter to take a folio" - Chengming Zhou has optimized zswap's rbtree locking, providing significant reductions in system time and modest but measurable reductions in overall runtimes. The series is "mm/zswap: optimize the scalability of zswap rb-tree". - Chengming Zhou has also provided the series "mm/zswap: optimize zswap lru list" which provides measurable runtime benefits in some swap-intensive situations. - And Chengming Zhou further optimizes zswap in the series "mm/zswap: optimize for dynamic zswap_pools". Measured improvements are modest. - zswap cleanups and simplifications from Yosry Ahmed in the series "mm: zswap: simplify zswap_swapoff()". - In the series "Add DAX ABI for memmap_on_memory", Vishal Verma has contributed several DAX cleanups as well as adding a sysfs tunable to control the memmap_on_memory setting when the dax device is hotplugged as system memory. - Johannes Weiner has added the large series "mm: zswap: cleanups", which does that. - More DAMON work from SeongJae Park in the series "mm/damon: make DAMON debugfs interface deprecation unignorable" "selftests/damon: add more tests for core functionalities and corner cases" "Docs/mm/damon: misc readability improvements" "mm/damon: let DAMOS feeds and tame/auto-tune itself" - In the series "mm/mempolicy: weighted interleave mempolicy and sysfs extension" Rakie Kim has developed a new mempolicy interleaving policy wherein we allocate memory across nodes in a weighted fashion rather than uniformly. This is beneficial in heterogeneous memory environments appearing with CXL. - Christophe Leroy has contributed some cleanup and consolidation work against the ARM pagetable dumping code in the series "mm: ptdump: Refactor CONFIG_DEBUG_WX and check_wx_pages debugfs attribute". - Luis Chamberlain has added some additional xarray selftesting in the series "test_xarray: advanced API multi-index tests". - Muhammad Usama Anjum has reworked the selftest code to make its human-readable output conform to the TAP ("Test Anything Protocol") format. Amongst other things, this opens up the use of third-party tools to parse and process out selftesting results. - Ryan Roberts has added fork()-time PTE batching of THP ptes in the series "mm/memory: optimize fork() with PTE-mapped THP". Mainly targeted at arm64, this significantly speeds up fork() when the process has a large number of pte-mapped folios. - David Hildenbrand also gets in on the THP pte batching game in his series "mm/memory: optimize unmap/zap with PTE-mapped THP". It implements batching during munmap() and other pte teardown situations. The microbenchmark improvements are nice. - And in the series "Transparent Contiguous PTEs for User Mappings" Ryan Roberts further utilizes arm's pte's contiguous bit ("contpte mappings"). Kernel build times on arm64 improved nicely. Ryan's series "Address some contpte nits" provides some followup work. - In the series "mm/hugetlb: Restore the reservation" Breno Leitao has fixed an obscure hugetlb race which was causing unnecessary page faults. He has also added a reproducer under the selftest code. - In the series "selftests/mm: Output cleanups for the compaction test", Mark Brown did what the title claims. - Kinsey Ho has added the series "mm/mglru: code cleanup and refactoring". - Even more zswap material from Nhat Pham. The series "fix and extend zswap kselftests" does as claimed. - In the series "Introduce cpu_dcache_is_aliasing() to fix DAX regression" Mathieu Desnoyers has cleaned up and fixed rather a mess in our handling of DAX on archiecctures which have virtually aliasing data caches. The arm architecture is the main beneficiary. - Lokesh Gidra's series "per-vma locks in userfaultfd" provides dramatic improvements in worst-case mmap_lock hold times during certain userfaultfd operations. - Some page_owner enhancements and maintenance work from Oscar Salvador in his series "page_owner: print stacks and their outstanding allocations" "page_owner: Fixup and cleanup" - Uladzislau Rezki has contributed some vmalloc scalability improvements in his series "Mitigate a vmap lock contention". It realizes a 12x improvement for a certain microbenchmark. - Some kexec/crash cleanup work from Baoquan He in the series "Split crash out from kexec and clean up related config items". - Some zsmalloc maintenance work from Chengming Zhou in the series "mm/zsmalloc: fix and optimize objects/page migration" "mm/zsmalloc: some cleanup for get/set_zspage_mapping()" - Zi Yan has taught the MM to perform compaction on folios larger than order=0. This a step along the path to implementaton of the merging of large anonymous folios. The series is named "Enable >0 order folio memory compaction". - Christoph Hellwig has done quite a lot of cleanup work in the pagecache writeback code in his series "convert write_cache_pages() to an iterator". - Some modest hugetlb cleanups and speedups in Vishal Moola's series "Handle hugetlb faults under the VMA lock". - Zi Yan has changed the page splitting code so we can split huge pages into sizes other than order-0 to better utilize large folios. The series is named "Split a folio to any lower order folios". - David Hildenbrand has contributed the series "mm: remove total_mapcount()", a cleanup. - Matthew Wilcox has sought to improve the performance of bulk memory freeing in his series "Rearrange batched folio freeing". - Gang Li's series "hugetlb: parallelize hugetlb page init on boot" provides large improvements in bootup times on large machines which are configured to use large numbers of hugetlb pages. - Matthew Wilcox's series "PageFlags cleanups" does that. - Qi Zheng's series "minor fixes and supplement for ptdesc" does that also. S390 is affected. - Cleanups to our pagemap utility functions from Peter Xu in his series "mm/treewide: Replace pXd_large() with pXd_leaf()". - Nico Pache has fixed a few things with our hugepage selftests in his series "selftests/mm: Improve Hugepage Test Handling in MM Selftests". - Also, of course, many singleton patches to many things. Please see the individual changelogs for details. * tag 'mm-stable-2024-03-13-20-04' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (435 commits) mm/zswap: remove the memcpy if acomp is not sleepable crypto: introduce: acomp_is_async to expose if comp drivers might sleep memtest: use {READ,WRITE}_ONCE in memory scanning mm: prohibit the last subpage from reusing the entire large folio mm: recover pud_leaf() definitions in nopmd case selftests/mm: skip the hugetlb-madvise tests on unmet hugepage requirements selftests/mm: skip uffd hugetlb tests with insufficient hugepages selftests/mm: dont fail testsuite due to a lack of hugepages mm/huge_memory: skip invalid debugfs new_order input for folio split mm/huge_memory: check new folio order when split a folio mm, vmscan: retry kswapd's priority loop with cache_trim_mode off on failure mm: add an explicit smp_wmb() to UFFDIO_CONTINUE mm: fix list corruption in put_pages_list mm: remove folio from deferred split list before uncharging it filemap: avoid unnecessary major faults in filemap_fault() mm,page_owner: drop unnecessary check mm,page_owner: check for null stack_record before bumping its refcount mm: swap: fix race between free_swap_and_cache() and swapoff() mm/treewide: align up pXd_leaf() retval across archs mm/treewide: drop pXd_large() ... |
||
Dan Williams
|
edc1243437 |
Documentation/ABI/testing/debugfs-cxl: Fix "Unexpected indentation"
Stephen reported that an htmldocs build hit: Documentation/ABI/testing/debugfs-cxl:38: ERROR: Unexpected indentation. It turns out that line was fine but the tool was unhappy about some line breaks in the table of values to error types. It turns out that: make V=1 SPHINXDIRS="admin-guide" htmldocs ...can not be used to get more info about what is behind a documentation build error. It was only pure luck that reflowing the text resulted in an error message that seemed a imply a problem later on with line breaks around the table. Fixes: 8039804cfa73 ("cxl/core: Add CXL EINJ debugfs files") Cc: Jonathan Corbet <corbet@lwn.net> Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Closes: http://lore.kernel.org/r/20240314141313.7ba04aff@canb.auug.org.au Cc: Ben Cheatham <Benjamin.Cheatham@amd.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> |
||
Linus Torvalds
|
01732755ee |
Probes updates for v6.9:
- x96/kprobes: Use boolean for some function return instead of 0 and 1. - x86/kprobes: Prohibit probing on INT/UD. This prevents user to put kprobe on INTn/INT1/INT3/INTO and UD0/UD1/UD2 because these are used for a special purpose in the kernel. - x86/kprobes: Boost Grp instructions. Because a few percent of kernel instructions are Grp 2/3/4/5 and those are safe to be executed without ip register fixup, allow those to be boosted (direct execution on the trampoline buffer with a JMP). - tracing/probes: Add function argument access from return events (kretprobe and fprobe). This allows user to compare how a data structure field is changed after executing a function. With BTF, return event also accepts function argument access by name. This also includes below patches; . Fix a wrong comment (using "Kretprobe" in fprobe) . Cleanup a big probe argument parser function into three parts, type parser, post-processing function, and main parser. . Cleanup to set nr_args field when initializing trace_probe instead of counting up it while parsing. . Cleanup a redundant #else block from tracefs/README source code. . Update selftests to check entry argument access from return probes. . Documentation update about entry argument access from return probes. -----BEGIN PGP SIGNATURE----- iQFPBAABCgA5FiEEh7BulGwFlgAOi5DV2/sHvwUrPxsFAmXwW4kbHG1hc2FtaS5o aXJhbWF0c3VAZ21haWwuY29tAAoJENv7B78FKz8bH80H/3H6JENlDAjaSLi4vYrP Qyw/cOGIuGu8cDEzkkOaFMol3TY23M7tQZH1lFefvV92gebZ0ttXnrQhSsKeO5XT PCZ6Eoift5rwJCY967W4V6O0DrAkOGHlPtlKs47APJnTXwn8RcFTqWlQmhWg1AfD g/FCWV7cs3eewZgV9iQcLydOoLLgRMr3G3rtPYQbCXhPzze0WTu4dSOXxCTjFe04 riHQy7R+ut6Cur8njpoqZl6bCMkQqAylByXf6wK96HjcS0+ZI7Ivi8Ey3l2aAFen EeIViMU2Bl02XzBszj7Xq2cT/ebYAgDonFW3/5ZKD1YMO6F7wPoVH5OHrQ518Xuw hQ8= =O6l5 -----END PGP SIGNATURE----- Merge tag 'probes-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace Pull probes updates from Masami Hiramatsu: "x86 kprobes: - Use boolean for some function return instead of 0 and 1 - Prohibit probing on INT/UD. This prevents user to put kprobe on INTn/INT1/INT3/INTO and UD0/UD1/UD2 because these are used for a special purpose in the kernel - Boost Grp instructions. Because a few percent of kernel instructions are Grp 2/3/4/5 and those are safe to be executed without ip register fixup, allow those to be boosted (direct execution on the trampoline buffer with a JMP) tracing: - Add function argument access from return events (kretprobe and fprobe). This allows user to compare how a data structure field is changed after executing a function. With BTF, return event also accepts function argument access by name. - Fix a wrong comment (using "Kretprobe" in fprobe) - Cleanup a big probe argument parser function into three parts, type parser, post-processing function, and main parser - Cleanup to set nr_args field when initializing trace_probe instead of counting up it while parsing - Cleanup a redundant #else block from tracefs/README source code - Update selftests to check entry argument access from return probes - Documentation update about entry argument access from return probes" * tag 'probes-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: Documentation: tracing: Add entry argument access at function exit selftests/ftrace: Add test cases for entry args at function exit tracing/probes: Support $argN in return probe (kprobe and fprobe) tracing: Remove redundant #else block for BTF args from README tracing/probes: cleanup: Set trace_probe::nr_args at trace_probe_init tracing/probes: Cleanup probe argument parser tracing/fprobe-event: cleanup: Fix a wrong comment in fprobe event x86/kprobes: Boost more instructions from grp2/3/4/5 x86/kprobes: Prohibit kprobing on INT and UD x86/kprobes: Refactor can_{probe,boost} return type to bool |
||
Varshini Rajendran
|
705a1280fb |
dt-bindings: atmel-nand: add microchip,sam9x7-pmecc
Add microchip,sam9x7-pmecc to DT bindings documentation. Signed-off-by: Varshini Rajendran <varshini.rajendran@microchip.com> Acked-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20240223172520.671940-1-varshini.rajendran@microchip.com |
||
Linus Torvalds
|
35e886e88c |
Landlock updates for v6.9-rc1
-----BEGIN PGP SIGNATURE----- iIYEABYKAC4WIQSVyBthFV4iTW/VU1/l49DojIL20gUCZfHmqxAcbWljQGRpZ2lr b2QubmV0AAoJEOXj0OiMgvbSvbABAIUF7nujsgnE9AykjhTKzg+by86mvXK0fdLG WVW0cwfgAP49daJb8JyZP9d6PvcgDfH4vV8E7r5PFeaICPdoOwg2Bg== =xJV1 -----END PGP SIGNATURE----- Merge tag 'landlock-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux Pull landlock updates from Mickaël Salaün: "Some miscellaneous improvements, including new KUnit tests, extended documentation and boot help, and some cosmetic cleanups. Additional test changes already went through the net tree" * tag 'landlock-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux: samples/landlock: Don't error out if a file path cannot be opened landlock: Use f_cred in security_file_open() hook landlock: Rename "ptrace" files to "task" landlock: Simplify current_check_access_socket() landlock: Warn once if a Landlock action is requested while disabled landlock: Extend documentation for kernel support landlock: Add support for KUnit tests selftests/landlock: Clean up error logs related to capabilities |
||
Linus Torvalds
|
6d75c6f40a |
arm64 updates for 6.9:
* Reorganise the arm64 kernel VA space and add support for LPA2 (at stage 1, KVM stage 2 was merged earlier) - 52-bit VA/PA address range with 4KB and 16KB pages * Enable Rust on arm64 * Support for the 2023 dpISA extensions (data processing ISA), host only * arm64 perf updates: - StarFive's StarLink (integrates one or more CPU cores with a shared L3 memory system) PMU support - Enable HiSilicon Erratum 162700402 quirk for HIP09 - Several updates for the HiSilicon PCIe PMU driver - Arm CoreSight PMU support - Convert all drivers under drivers/perf/ to use .remove_new() * Miscellaneous: - Don't enable workarounds for "rare" errata by default - Clean up the DAIF flags handling for EL0 returns (in preparation for NMI support) - Kselftest update for ptrace() - Update some of the sysreg field definitions - Slight improvement in the code generation for inline asm I/O accessors to permit offset addressing - kretprobes: acquire regs via a BRK exception (previously done via a trampoline handler) - SVE/SME cleanups, comment updates - Allow CALL_OPS+CC_OPTIMIZE_FOR_SIZE with clang (previously disabled due to gcc silently ignoring -falign-functions=N) -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEE5RElWfyWxS+3PLO2a9axLQDIXvEFAmXxiSgACgkQa9axLQDI XvHd7hAAjQrQqxJogPT2ahM5/gxct8qTrXpIgX0B1Y7bb5R8ztvOUN9MJNuDyRsj 0s28SSZw387LReM5OUu+U6G/iahcuNAyP/8d9qeac32Tidd255fV3KPEh4C4eC+u 0HeOqLBZ+stmNoa71tBC2K6SmchizhYyYduvRnri8km8K4OMDawHWqWRTXl0PNRT RMVJvZTDJMPfMBFeD4+B7EnSFOoP14tKCw9MZvlbpT2PEV0kINjhCQiojW2jJgqv w36vm/dhwsg1avSzT1xhy3KE+m+7n28+IC/wr1HB7c1WumvYKv7Z84ieCp3PlO3Z owvVO7dKJC6X3RkoY6Kge5p2RHU6poDerDVHYiAvG+Zi57nrDmHyAubskThsGTGR AibSEeJ5nQ0yM6hx7zAIQa5XEo4l0svD1ZM7NynY+5JR44W9cdAH3SnEsvIBMGIf /ja+iZ1W4ZQnIESQXD5uDPSxILfqQ8Ebhdorpw+Qg3rB7OhdTdGSSGQCi6V2PcJH d/ErFO+i0lFRBPJtBbUAN4EEu3HJcVYEoEnVJYQahC+6KyNGLxO+7L6sH0YO7Pag P1LRa6h8ktuBMrbCrOPWdmJYNDYCbb5rRtmcCwO0ItZ4g5tYWp9djFc8pyctCaNB MZxxRrUCNwXTOcFTDiYzyk+JCvpf3EvXfvj8AH+P8BMjFWgqHqw= =KTD/ -----END PGP SIGNATURE----- Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 updates from Catalin Marinas: "The major features are support for LPA2 (52-bit VA/PA with 4K and 16K pages), the dpISA extension and Rust enabled on arm64. The changes are mostly contained within the usual arch/arm64/, drivers/perf, the arm64 Documentation and kselftests. The exception is the Rust support which touches some generic build files. Summary: - Reorganise the arm64 kernel VA space and add support for LPA2 (at stage 1, KVM stage 2 was merged earlier) - 52-bit VA/PA address range with 4KB and 16KB pages - Enable Rust on arm64 - Support for the 2023 dpISA extensions (data processing ISA), host only - arm64 perf updates: - StarFive's StarLink (integrates one or more CPU cores with a shared L3 memory system) PMU support - Enable HiSilicon Erratum 162700402 quirk for HIP09 - Several updates for the HiSilicon PCIe PMU driver - Arm CoreSight PMU support - Convert all drivers under drivers/perf/ to use .remove_new() - Miscellaneous: - Don't enable workarounds for "rare" errata by default - Clean up the DAIF flags handling for EL0 returns (in preparation for NMI support) - Kselftest update for ptrace() - Update some of the sysreg field definitions - Slight improvement in the code generation for inline asm I/O accessors to permit offset addressing - kretprobes: acquire regs via a BRK exception (previously done via a trampoline handler) - SVE/SME cleanups, comment updates - Allow CALL_OPS+CC_OPTIMIZE_FOR_SIZE with clang (previously disabled due to gcc silently ignoring -falign-functions=N)" * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (134 commits) Revert "mm: add arch hook to validate mmap() prot flags" Revert "arm64: mm: add support for WXN memory translation attribute" Revert "ARM64: Dynamically allocate cpumasks and increase supported CPUs to 512" ARM64: Dynamically allocate cpumasks and increase supported CPUs to 512 kselftest/arm64: Add 2023 DPISA hwcap test coverage kselftest/arm64: Add basic FPMR test kselftest/arm64: Handle FPMR context in generic signal frame parser arm64/hwcap: Define hwcaps for 2023 DPISA features arm64/ptrace: Expose FPMR via ptrace arm64/signal: Add FPMR signal handling arm64/fpsimd: Support FEAT_FPMR arm64/fpsimd: Enable host kernel access to FPMR arm64/cpufeature: Hook new identification registers up to cpufeature docs: perf: Fix build warning of hisi-pcie-pmu.rst perf: starfive: Only allow COMPILE_TEST for 64-bit architectures MAINTAINERS: Add entry for StarFive StarLink PMU docs: perf: Add description for StarFive's StarLink PMU dt-bindings: perf: starfive: Add JH8100 StarLink PMU perf: starfive: Add StarLink PMU support docs: perf: Update usage for target filter of hisi-pcie-pmu ... |
||
Linus Torvalds
|
fe46a7dd18 |
sound updates for 6.9-rc1
This was a relatively calm development cycle. Most of changes are rather small device-specific fixes and enhancements. The only significant changes in ALSA core are code refactoring with the recent cleanup infrastructure, which should bring no functionality changes. Some highlights below: Core: - Lots of cleanups in ALSA core code with automatic kfree cleanup and locking guard macros - New ALSA core kunit test ASoC: - SoundWire support for AMD ACP 6.3 systems - Support for reporting version information for AVS firmware - Support DSPless mode for Intel Soundwire systems - Support for configuring CS35L56 amplifiers using EFI calibration data - Log which component is being operated on as part of power management trace events. - Support for Microchip SAM9x7, NXP i.MX95 and Qualcomm WCD939x HD- and USB-audio: - More Cirrus HD-audio codec support - TAS2781 HD-audio codec fixes - Scarlett2 mixer fixes Others: - Enhancement of virtio driver for audio control supports - Cleanups of legacy PM code with new macros - Firewire sound updates -----BEGIN PGP SIGNATURE----- iQJCBAABCAAsFiEEIXTw5fNLNI7mMiVaLtJE4w1nLE8FAmXyzFQOHHRpd2FpQHN1 c2UuZGUACgkQLtJE4w1nLE80WQ//bQeLEUF9HQqprCW96jFiGeO3/0Zb5pdCCrZw VYRxzeGBfMfVFvXSC4/Rp3zr4Dbc+sOg9GXAD6PVAo/QudIDkuX1pk/gRN2NFXQ5 bimdZ6obM4WCl7isbDIbn/ifOx05F7p0+J9T9nAPrvBG4lpzXoMhGz75YnwaPlrh q5MKEZcuONlZPHZrBy/UsrYqWrnWUi2yWgQ5gRg/PTM4dgUAy2pH7NpKNxOiRntJ eqBfdvglSWQDH9kPgmeTggtFN8Axy+pd+g9M5pi/KOJfoBpWuv2nK31gnymdqV4H UrmwU/VAL2Y0zU34RCZQvPFre6S+487FEf/g+qgVTDqi0kxxFT2btcaTjggjLwEy p/SJlqNnA7W7D67/qf4MPNOEp88Dd6o1YN7o01vyC9RoX5FAbzvNLF8oH4BwGxs+ HI+5aJUY1f2MGwN3NpPW5E12d1RSgSi9L9l/R8oAQmonARr3drj3tkndhFjndgXG IctwHlkYRSibe6m5k6sDEcil70UNl5M6sr/IjPmDvYudjdKHisowrxqF+nPrAYdM 0z3fW333+OQf0XVd9iPLBmq+PpiAY1AhCJeF/hPr3D5qDZInhcd8CouFie+QGkHT Z5j5CvhNLgRdmlW9jvfBPBBCT7u8jr6JFszA3g6wpWUx6ndAGsI1z6iC+h23NpZj dxmJU00= =h9kz -----END PGP SIGNATURE----- Merge tag 'sound-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound updates from Takashi Iwai: "This was a relatively calm development cycle. Most of changes are rather small device-specific fixes and enhancements. The only significant changes in ALSA core are code refactoring with the recent cleanup infrastructure, which should bring no functionality changes. Some highlights below: Core: - Lots of cleanups in ALSA core code with automatic kfree cleanup and locking guard macros - New ALSA core kunit test ASoC: - SoundWire support for AMD ACP 6.3 systems - Support for reporting version information for AVS firmware - Support DSPless mode for Intel Soundwire systems - Support for configuring CS35L56 amplifiers using EFI calibration data - Log which component is being operated on as part of power management trace events. - Support for Microchip SAM9x7, NXP i.MX95 and Qualcomm WCD939x HD- and USB-audio: - More Cirrus HD-audio codec support - TAS2781 HD-audio codec fixes - Scarlett2 mixer fixes Others: - Enhancement of virtio driver for audio control supports - Cleanups of legacy PM code with new macros - Firewire sound updates" * tag 'sound-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (307 commits) ALSA: usb-audio: Stop parsing channels bits when all channels are found. ALSA: hda/tas2781: remove unnecessary runtime_pm calls ALSA: hda/realtek - ALC236 fix volume mute & mic mute LED on some HP models ALSA: aaci: Delete unused variable in aaci_do_suspend ALSA: scarlett2: Fix Scarlett 4th Gen input gain range again ALSA: scarlett2: Fix Scarlett 4th Gen input gain range ALSA: scarlett2: Fix Scarlett 4th Gen autogain status values ALSA: scarlett2: Fix Scarlett 4th Gen 4i4 low-voltage detection ALSA: hda/tas2781: restore power state after system_resume ALSA: hda/tas2781: do not call pm_runtime_force_* in system_resume/suspend ALSA: hda/tas2781: do not reset cur_* values in runtime_suspend ALSA: hda/tas2781: add lock to system_suspend ALSA: hda/tas2781: use dev_dbg in system_resume ALSA: hda/realtek: fix ALC285 issues on HP Envy x360 laptops platform/x86: serial-multi-instantiate: Add support for CS35L54 and CS35L57 ALSA: hda: cs35l56: Add support for CS35L54 and CS35L57 ASoC: cs35l56: Add support for CS35L54 and CS35L57 ASoC: Intel: catpt: Carefully use PCI bitwise constants ALSA: hda: hda_component: Include sound/hda_codec.h ALSA: hda: hda_component: Add missing #include guards ... |
||
Linus Torvalds
|
705c1da8fa |
pci-v6.9-changes
-----BEGIN PGP SIGNATURE----- iQJIBAABCgAyFiEEgMe7l+5h9hnxdsnuWYigwDrT+vwFAmXw04sUHGJoZWxnYWFz QGdvb2dsZS5jb20ACgkQWYigwDrT+vyT3xAAsp5+c2IcbrXpZZM7figwx4y9PPRp jcQ4AYSGP41xqTUGXUTcVZYvRorSIAFEOz33U0SL1UNxoOZz8j/M6SD58k8a6XRr 9SSPuKja1OKJjONhS1bzrcbVtuzr71ISrECXfLkvW5hY5hvq+3+anMtu3/UIEHu6 M1vVc+basRjjPJNTixMWvVqS3R+4gDAFeBtdZl/D+U6v0v2xOK+81YZqjfZZCw9v xmdHHK2dKNEdysNoRJ5cafY3b1NnSsrxlHbIhBnKt+7uRSWKD1dHcBQj7wDc/HrX yBGca+BZBKitXEJM3p5KcWWs4ijaywGw0GSffUIKrN9i6RIfwnxBH9jUbwDngifU 2IR/kLEqdjYi/WnENxIHpQATLyXhXZ8uEnLS0xMlRIA96u3M5B0mrYOZxaN3bo12 A3aE+aPOTw0u1wf7G8dBX6IdYnjZ/ZuR9Q+fVoKpZBvsYUVaKyiKCtKMCNaVirn5 z7nxR1W71ee+35+37KthPXhiw+YtURGz1wBWt+wWUMjBcpIj2bpzU9wQDE9ZMdYt XJoJcatrRhJzefO3uzd0egft+vwk0xrj5LQEDhMQyDrnBLC4EgI5niKPWqbay5Nx Cnll01CI82xAnIF6eu7OOuI1nYGtoFcY8rP3hTC85cWN7Xi8SAOLTZZcVTpfBMUr l2uEll8p+8dZ6IY= =AP3I -----END PGP SIGNATURE----- Merge tag 'pci-v6.9-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci Pull PCI updates from Bjorn Helgaas: "Enumeration: - Consolidate interrupt related code in irq.c (Ilpo Järvinen) - Reduce kernel size by replacing sysfs resource macros with functions (Ilpo Järvinen) - Reduce kernel size by compiling sysfs support only when CONFIG_SYSFS=y (Lukas Wunner) - Avoid using Extended Tags on 3ware-9650SE Root Port to work around an apparent hardware defect (Jörg Wedekind) Resource management: - Fix an MMIO mapping leak in pci_iounmap() (Philipp Stanner) - Move pci_iomap.c and other PCI-specific devres code to drivers/pci (Philipp Stanner) - Consolidate PCI devres code in devres.c (Philipp Stanner) Power management: - Avoid D3cold on Asus B1400 PCI-NVMe bridge, where firmware doesn't know how to return correctly to D0, and remove previous quirk that wasn't as specific (Daniel Drake) - Allow runtime PM when the driver enables it but doesn't need any runtime PM callbacks (Raag Jadav) - Drain runtime-idle callbacks before driver removal to avoid races between .remove() and .runtime_idle(), which caused intermittent page faults when the rtsx .runtime_idle() accessed registers that its .remove() had already unmapped (Rafael J. Wysocki) Virtualization: - Avoid Secondary Bus Reset on LSI FW643 so it can be assigned to VMs with VFIO, e.g., for professional audio software on many Apple machines, at the cost of leaking state between VMs (Edmund Raile) Error handling: - Print all logged TLP Prefixes, not just the first, after AER or DPC errors (Ilpo Järvinen) - Quirk the DPC PIO log size for Intel Raptor Lake Root Ports, which still don't advertise a legal size (Paul Menzel) - Ignore expected DPC Surprise Down errors on hot removal (Smita Koralahalli) - Block runtime suspend while handling AER errors to avoid races that prevent the device form being resumed from D3hot (Stanislaw Gruszka) Peer-to-peer DMA: - Use atomic XA allocation in RCU read section (Christophe JAILLET) ASPM: - Collect bits of ASPM-related code that we need even without CONFIG_PCIEASPM into aspm.c (David E. Box) - Save/restore L1 PM Substates config for suspend/resume (David E. Box) - Update save_save when ASPM config is changed, so a .slot_reset() during error recovery restores the changed config, not the .probe()-time config (Vidya Sagar) Endpoint framework: - Refactor and improve pci_epf_alloc_space() API (Niklas Cassel) - Clean up endpoint BAR descriptions (Niklas Cassel) - Fix ntb_register_device() name leak in error path (Yang Yingliang) - Return actual error code for pci_vntb_probe() failure (Yang Yingliang) Broadcom STB PCIe controller driver: - Fix MDIO write polling, which previously never waited for completion (Jonathan Bell) Cadence PCIe endpoint driver: - Clear the ARI "Next Function Number" of last function (Jasko-EXT Wojciech) Freescale i.MX6 PCIe controller driver: - Simplify by replacing switch statements with function pointers for different hardware variants (Frank Li) - Simplify by using clk_bulk*() API (Frank Li) - Remove redundant DT clock and reg/reg-name details (Frank Li) - Add i.MX95 DT and driver support for both Root Complex and Endpoint mode (Frank Li) Microsoft Hyper-V host bridge driver: - Reduce memory usage by limiting ring buffer size to 16KB instead of 4 pages (Michael Kelley) Qualcomm PCIe controller driver: - Add X1E80100 DT and driver support (Abel Vesa) - Add DT 'required-opps' for SoCs that require a minimum performance level (Johan Hovold) - Make DT 'msi-map-mask' optional, depending on how MSI interrupts are mapped (Johan Hovold) - Disable ASPM L0s for sc8280xp, sa8540p and sa8295p because the PHY configuration isn't tuned correctly for L0s (Johan Hovold) - Split dt-binding qcom,pcie.yaml into qcom,pcie-common.yaml and separate files for SA8775p, SC7280, SC8180X, SC8280XP, SM8150, SM8250, SM8350, SM8450, SM8550 for easier reviewing (Krzysztof Kozlowski) - Enable BDF to SID translation by disabling bypass mode (Manivannan Sadhasivam) - Add endpoint MHI support for Snapdragon SA8775P SoC (Mrinmay Sarkar) Synopsys DesignWare PCIe controller driver: - Allocate 64-bit MSI address if no 32-bit address is available (Ajay Agarwal) - Fix endpoint Resizable BAR to actually advertise the required 1MB size (Niklas Cassel) MicroSemi Switchtec management driver: - Release resources if the .probe() fails (Christophe JAILLET) Miscellaneous: - Make pcie_port_bus_type const (Ricardo B. Marliere)" * tag 'pci-v6.9-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (77 commits) PCI/ASPM: Update save_state when configuration changes PCI/ASPM: Disable L1 before configuring L1 Substates PCI/ASPM: Call pci_save_ltr_state() from pci_save_pcie_state() PCI/ASPM: Save L1 PM Substates Capability for suspend/resume PCI: hv: Fix ring buffer size calculation PCI: dwc: endpoint: Fix advertised resizable BAR size PCI: cadence: Clear the ARI Capability Next Function Number of the last function PCI: dwc: Strengthen the MSI address allocation logic PCI: brcmstb: Fix broken brcm_pcie_mdio_write() polling PCI: qcom: Add X1E80100 PCIe support dt-bindings: PCI: qcom: Document the X1E80100 PCIe Controller PCI: qcom: Enable BDF to SID translation properly PCI/AER: Generalize TLP Header Log reading PCI/AER: Use explicit register size for PCI_ERR_CAP PCI: qcom: Disable ASPM L0s for sc8280xp, sa8540p and sa8295p dt-bindings: PCI: qcom: Do not require 'msi-map-mask' dt-bindings: PCI: qcom: Allow 'required-opps' PCI/AER: Block runtime suspend when handling errors PCI/ASPM: Move pci_save_ltr_state() to aspm.c PCI/ASPM: Always build aspm.c ... |
||
Linus Torvalds
|
66fd6d0bd7 |
platform-drivers-x86 for v6.9-1
Highlights: - acer-wmi: New HW support - amd/pmf: Support for new revision of heartbeat notify - asus-wmi: Correctly handle HW without LEDs - fujitsu-laptop: Battery charge control support - hp-wmi: Support for new thermal profiles - ideapad-laptop: Support for refresh rate key - intel/pmc: Put AI accelerator (GNA) into D3 if it has no driver to allow entry into low-power modes, and temporarily removed Lunar Lake SSRAM support due to breaking FW changes causing probe fail (further breaking FW changes are still pending) - pmc/punit_atom: Report devices that prevent reacing low power levels - surface: Fan speed function support - thinkpad_acpi: Support for more sperial keys and complete the list of models with non-standard fan registers - touchscreen_dmi: New HW support - wmi: Continued modernization efforts - Removal of obsoleted ledtrig-audio call and the related dependency - Debug & metrics interface improvements - Miscellaneous cleanups / fixes / improvements The following is an automated shortlog grouped by driver: acer-wmi: - Add predator_v4 module parameter - Add support for Acer PH16-71 amd/hsmp: - Add support for ACPI based probing - Cache pci_dev in struct hsmp_socket - Change devm_kzalloc() to devm_kcalloc() - Check num_sockets against MAX_AMD_SOCKETS - Create static func to handle platdev - Define a struct to hold mailbox regs - Move dev from platdev to hsmp_socket - Move hsmp_test to probe - Non-ACPI support for AMD F1A_M00~0Fh - Remove extra parenthesis and add a space - Restructure sysfs group creation amd/pmf: - Add missing __iomem attribute to policy_base - Add support to get APTS index numbers for static slider - Add support to get sbios requests in PMF driver - Add support to get sps default APTS index values - Add support to notify sbios heart beat event - Differentiate PMF ACPI versions - Disable debugfs support for querying power thermals - Do not use readl() for policy buffer access - Fix possible out-of-bound memory accesses - Fix return value of amd_pmf_start_policy_engine() - Update sps power thermals according to the platform-profiles - Use struct for cookie header asus-wmi: - Consider device is absent when the read is ~0 - Revert: Support WMI event queue clk: x86: - Move clk-pmc-atom register defines to include/linux/platform_data/x86/pmc_atom.h dell-privacy: - Remove usage of wmi_has_guid() Documentation/x86/amd/hsmp: - Updating urls drivers/mellanox: - Convert snprintf to sysfs_emit fujitsu-laptop: - Add battery charge control support hp-wmi: - Add thermal profile support for 8BAD boards - Tidy up module source code ideapad-laptop: - map Fn + R key to KEY_REFRESH_RATE_TOGGLE - support Fn+R dual-function key Input: - allocate keycode for Display refresh rate toggle intel/ifs: - Add an entry rendezvous for SAF - Add current batch number to trace output - Remove unnecessary initialization of 'ret' - Replace the exit rendezvous with an entry rendezvous for ARRAY_BIST - Trace on all HT threads when executing a test intel/pmc/arl: - Put GNA device in D3 intel/pmc: - Improve PKGC residency counters debug intel/pmc/lnl: - Remove SSRAM support intel_scu_ipcutil: - Make scu static intel_scu_pcidrv: - Remove unused intel-mid.h intel_scu_wdt: - Remove unused intel-mid.h intel/tpmi: - Change vsec offset to u64 intel/vsec: - Remove nuisance message ISST: - Allow reading core-power state on HWP disabled systems mlxbf-pmc: - Cleanup signed/unsigned mix-up - fix signedness bugs - Ignore unsupported performance blocks mlxbf-pmc: mlxbf_pmc_event_list(): - make size ptr optional mlxbf-pmc: - Replace uintN_t with kernel-style types mlxreg-hotplug: - Remove redundant NULL-check pmc_atom: - Annotate d3_sts register bit defines - Check state of PMC clocks on s2idle - Check state of PMC managed devices on s2idle silicom-platform: - clean up a check surface: aggregator_registry: - add entry for fan speed thinkpad_acpi: - Add more ThinkPads with non-standard reg address for fan - Fix to correct wrong temp reporting on some ThinkPads - remove redundant assignment to variable i - Simplify thermal mode checking - Support for mode FN key touchscreen_dmi: - Add an extra entry for a variant of the Chuwi Vi8 tablet wmi: - Always evaluate _WED when receiving an event - Check if event data is not NULL - Check if WMxx control method exists - Do not instantiate older WMI drivers multiple times - Ignore duplicated GUIDs in legacy matches - Make input buffer mandatory when evaluating methods - Prevent incompatible event driver from probing - Remove obsolete duplicate GUID allowlist - Remove unnecessary out-of-memory message - Replace pr_err() with dev_err() - Stop using ACPI device class - Update documentation regarding _WED - Use ACPI device name in netlink event - Use FW_BUG when warning about missing control methods x86/atom: - Check state of Punit managed devices on s2idle x86: ibm_rtl: - make rtl_subsys const x86: wmi: - make wmi_bus_type const platform/x86: - make fw_attr_class constant - remove obsolete calls to ledtrig_audio_get Merges: - Merge tag 'platform-drivers-x86-v6.8-2' into pdx/for-next - Merge tag 'platform-drivers-x86-v6.8-4' into pdx86/for-next -----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQSCSUwRdwTNL2MhaBlZrE9hU+XOMQUCZfLZKgAKCRBZrE9hU+XO MWqnAQCZW0KiSzXbJkTN4GWlMOqnlaJsiflnPeVNxH59bDUTeQEA/OdSzyiDUqKr zJcGnOyILuQ3wCvQ5SuqRCwjFHXOQg0= =8y6r -----END PGP SIGNATURE----- Merge tag 'platform-drivers-x86-v6.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86 Pull x86 platform driver updates from Ilpo Järvinen: - New acer-wmi HW support - Support for new revision of amd/pmf heartbeat notify - Correctly handle asus-wmi HW without LEDs - fujitsu-laptop battery charge control support - Support for new hp-wmi thermal profiles - Support ideapad-laptop refresh rate key - Put intel/pmc AI accelerator (GNA) into D3 if it has no driver to allow entry into low-power modes, and temporarily removed Lunar Lake SSRAM support due to breaking FW changes causing probe fail (further breaking FW changes are still pending) - Report pmc/punit_atom devices that prevent reacing low power levels - Surface Fan speed function support - Support for more sperial keys and complete the list of models with non-standard fan registers in thinkpad_acpi - New DMI touchscreen HW support - Continued modernization efforts of wmi - Removal of obsoleted ledtrig-audio call and the related dependency - Debug & metrics interface improvements - Miscellaneous cleanups / fixes / improvements * tag 'platform-drivers-x86-v6.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (87 commits) platform/x86/intel/pmc: Improve PKGC residency counters debug platform/x86: asus-wmi: Consider device is absent when the read is ~0 Documentation/x86/amd/hsmp: Updating urls platform/mellanox: mlxreg-hotplug: Remove redundant NULL-check platform/x86/amd/pmf: Update sps power thermals according to the platform-profiles platform/x86/amd/pmf: Add support to get sps default APTS index values platform/x86/amd/pmf: Add support to get APTS index numbers for static slider platform/x86/amd/pmf: Add support to notify sbios heart beat event platform/x86/amd/pmf: Add support to get sbios requests in PMF driver platform/x86/amd/pmf: Disable debugfs support for querying power thermals platform/x86/amd/pmf: Differentiate PMF ACPI versions x86/platform/atom: Check state of Punit managed devices on s2idle platform/x86: pmc_atom: Check state of PMC clocks on s2idle platform/x86: pmc_atom: Check state of PMC managed devices on s2idle platform/x86: pmc_atom: Annotate d3_sts register bit defines clk: x86: Move clk-pmc-atom register defines to include/linux/platform_data/x86/pmc_atom.h platform/x86: make fw_attr_class constant platform/x86/intel/tpmi: Change vsec offset to u64 platform/x86: intel_scu_pcidrv: Remove unused intel-mid.h platform/x86: intel_scu_wdt: Remove unused intel-mid.h ... |
||
Linus Torvalds
|
f5c31bcf60 |
- Core Frameworks
- Introduce ExpressWire library - New Drivers - Add support for ON Semiconductor NCP5623 RGB LED Driver - New Device Support - Add support for PM660L to Qualcomm's LPG driver - New Functionality - Dynamically load modules required for the default-trigger - Add some support for suspend and resume - Allow LEDs to remain lit during suspend - Fix-ups - Device Tree binding adaptions/conversions/creation - Fix include lists; alphabetise, remove unused, explicitly add used - Add new led_match_default_trigger to avoid duplication - Add module alias' to aid auto-loading - Default to hw_control if no others are specified - De-bloat the supported link speed attribute lists - Remove superfluous code and simplify overall - Constify some variables - Bug Fixes - Prevent kernel panic when renaming the net interface - Fix Kconfig related build errors - Ensure mutexes are unlocked prior to destroying them - Provide clean-up between state changes to avoid invalid state - Fix some broken kernel-doc headers -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEdrbJNaO+IJqU8IdIUa+KL4f8d2EFAmXzCvUACgkQUa+KL4f8 d2Fh0A/+KQiuzluglEsnyG7gfb2771x9dQ9pIwaR68UkCwThNH8ico+NqUDs8Jur 6jtfYfKcWIz3i5kbnWBDGJfEEiVuDGu8Zv9UFxzQViyWQqawkJWNMsYqL3KtfI4i Ujj2Ja1MsoqO7COngry9I+3sT6rEwdQJMrVfNAdvOYjlXwr3O8Z2NipPACEqutUr 0gxKAEEbGOj3+s3UGInrGi9RGuOVBe9UNA2etmtie1kxkdowTxCNY94ukUf9tnvC WVXF8iOByUgVAxMh1ugSc27CTCV+VcDMYKKr9ABVhskI/pT3zMFoUCYY1EqhaOTF Q40+yFX8ERomNTgy1tbNf06PkzaN+NJ4P/SHFU79madfy4OM6QobpTSt7bBpaSEP gm3zuI1a353NPfAUZiIsTgv8jCh18w/adphTNsXY/4PnmkKF0+Pm57PJf8BDhlY3 KiScK7WXhGS9G3wNpLH+7QBdWiON3oWYJhVK4ijEfgRpEDofv+W16GzcETkUsyQ1 5DLu/W8wHN9zxHj1YXaitmnRjX3IMoltcIix8FI3YUKrx3m3twm2Vj5ZLziaPm83 7rBBPyePXwIamLokiTPCfXOxygO7Qv6VAp1aCR6400R/rtjykziboqvT2o6OMpkS W/88631VIuL9jAaP/zdUHrle1NpKDiHs2MF0Rtj+0OOoMJyOC7k= =m2vY -----END PGP SIGNATURE----- Merge tag 'leds-next-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds Pull LED updates from Lee Jones: "Core Framework: - Introduce ExpressWire library New Drivers: - Add support for ON Semiconductor NCP5623 RGB LED Driver New Device Support: - Add support for PM660L to Qualcomm's LPG driver New Functionality: - Dynamically load modules required for the default-trigger - Add some support for suspend and resume - Allow LEDs to remain lit during suspend Fix-ups: - Device Tree binding adaptions/conversions/creation - Fix include lists; alphabetise, remove unused, explicitly add used - Add new led_match_default_trigger to avoid duplication - Add module alias' to aid auto-loading - Default to hw_control if no others are specified - De-bloat the supported link speed attribute lists - Remove superfluous code and simplify overall - Constify some variables Bug Fixes: - Prevent kernel panic when renaming the net interface - Fix Kconfig related build errors - Ensure mutexes are unlocked prior to destroying them - Provide clean-up between state changes to avoid invalid state - Fix some broken kernel-doc headers" * tag 'leds-next-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds: (41 commits) leds: ncp5623: Add MS suffix to time defines leds: Add NCP5623 multi-led driver dt-bindings: leds: Add NCP5623 multi-LED Controller leds: mlxreg: Drop an excess struct mlxreg_led_data member leds: leds-mlxcpld: Fix struct mlxcpld_led_priv member name leds: lm3601x: Fix struct lm3601_led kernel-doc warnings leds: Fix ifdef check for gpio_led_register_device() dt-bindings: leds: qcom-lpg: Narrow nvmem for other variants dt-bindings: leds: qcom-lpg: Drop redundant qcom,pm8550-pwm in if:then: dt-bindings: leds: Add LED_FUNCTION_WAN_ONLINE for Internet access leds: sgm3140: Add missing timer cleanup and flash gpio control leds: expresswire: Don't depend on NEW_LEDS Revert "leds: Only descend into leds directory when CONFIG_NEW_LEDS is set" leds: aw2013: Unlock mutex before destroying it leds: qcom-lpg: Add QCOM_PBS dependency leds: rgb: leds-group-multicolor: Allow LEDs to stay on in suspend leds: trigger: netdev: Fix kernel panic on interface rename trig notify leds: qcom-lpg: Add PM660L configuration and compatible leds: spi-byte: Use devm_led_classdev_register_ext() leds: pca963x: Add support for suspend and resume ... |
||
Linus Torvalds
|
f3d8f29d1f |
- New Drivers
- Add support for Kinetic KTD2801 Backlight - Fix-ups - Fix include lists; alphabetise, remove unused, explicitly add used - Device Tree binding adaptions/conversions/creation - Use dev_err_probe() to clean-up error paths - Use/convert to new/better APIs/helpers/MACROs instead of hand-rolling implementations - Bug Fixes - Fix changes of NULL pointer dereference - Remedy a bunch of logic errors - Initialise (zero) Backlight properties data structures -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEdrbJNaO+IJqU8IdIUa+KL4f8d2EFAmXzCwMACgkQUa+KL4f8 d2Ej3g//SVxd1ZF4OVe8VcfdeviormwL2cOvhsBNQHVtsPKYMSjH37Bf9O99GrL4 IBrOza/6SQUTxuzZwkcn6Ryl9O2KalTIJahgTxpdwm4Yrd3TEUAyizbaMy+rG49s aW+bAbl+y4d6ag6XSrafrTVbDWESR8NsaU4pozbNS8HLjfCoT5RR0K6N5jPSTXhE /oxk1LoCdFFBAOfl6z0NRmyjCTy495bftACXMdpx+68P/jySHemwo2z10lei0Sai ucj89Q4SGvk/PMNTAYKpn+jPRzd+5OV3NZk79U0RaJvTaUwXDMw01ypFXPb3wacL 5t6TKwMKeZLXtVbA9OIDi7eRUiJwLIm+fb2rWZEdrsLDFRoe6U6uSa7BmFOwhX+T 6XznFtBbbRng+/VFE1Xaczm6uQAt5MuySWq/Wf+4tRH+MfsoFvoShSDok+KxRyo0 8YKaH6GcmGtwwAnL+7rp6vjvNYNhO8/ui6rErXoeiFQlXoNF43DBmG82jeUfiOWJ 9l/JaqbQnsYy5e2vUGR0GeJl+a5krR86yCoNzIkMBdRkcJqK6A1we7YPt8CMyUTy rLJzbF6zjqKK7uniXbSCsEM9VleR+Ex3zwTmKTR10rybU1eWbtYk/5ZrDjoX62xl CK/9N9f7vYhBh+xnHbchPQOLK6g7pZ227Y9ks4b54q6u042n2Zo= =SaGM -----END PGP SIGNATURE----- Merge tag 'backlight-next-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight Pull backlight updates from Lee Jones: "New Drivers: - Add support for Kinetic KTD2801 Backlight Fix-ups: - Fix include lists; alphabetise, remove unused, explicitly add used - Device Tree binding adaptions/conversions/creation - Use dev_err_probe() to clean-up error paths - Use/convert to new/better APIs/helpers/MACROs instead of hand-rolling implementations Bug Fixes: - Fix changes of NULL pointer dereference - Remedy a bunch of logic errors - Initialise (zero) Backlight properties data structures" * tag 'backlight-next-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight: (32 commits) backlight: pandora_bl: Drop unneeded ENOMEM error message backlight: lm3630a_bl: Simplify probe return on gpio request error backlight: lm3630a_bl: Handle deferred probe backlight: as3711_bl: Handle deferred probe backlight: bd6107: Handle deferred probe backlight: l4f00242t03: Simplify with dev_err_probe() backlight: gpio: Simplify with dev_err_probe() backlight: lp8788: Fully initialize backlight_properties during probe backlight: lm3639: Fully initialize backlight_properties during probe backlight: da9052: Fully initialize backlight_properties during probe backlight: lm3630a: Use backlight_get_brightness helper in update_status backlight: lm3630a: Don't set bl->props.brightness in get_brightness backlight: lm3630a: Initialize backlight_properties on init backlight: mp3309c: Fully initialize backlight_properties during probe backlight: mp3309c: Utilise temporary variable for struct device backlight: mp3309c: Use dev_err_probe() instead of dev_err() backlight: mp3309c: Make use of device properties dt-bindings: backlight: qcom-wled: Fix bouncing email addresses backlight: hx8357: Utilise temporary variable for struct device backlight: hx8357: Make use of dev_err_probe() ... |
||
Linus Torvalds
|
8403ce70be |
- New Device Support
- Add support for Watchdog to ChromeOS Embedded Controller - Add support for GPIOs to ChromeOS Embedded Controller - Add supprt for Sound to MediaTek MT6357 CODEC - New Functionality - Add power-off functionality to Texas Instruments TWL series CODECs - Fix-ups - Device Tree binding adaptions/conversions/creation - Use/convert to new/better APIs/helpers/MACROs instead of hand-rolling implementations - Trivial; spelling, whitespace, clean-ups, etc - Remove superfluous code and simplify overall - Fix include lists; alphabetise, remove unused, explicitly add used - Use dev_err_probe() to clean-up error paths - Convert used cache type over to the Maple Tree in many instances - Constify a bunch of static structs - Refrain from over-riding resources provided via the firmware - Bug Fixes - Fix a clock related firmware bug on Dell XPS 9530 et al. - Repair incorrect IRQ designations - Increase buffer sizes to omit various snprintf compiler errors - Ensure errors are handled properly - Balance references and prevent resource leaks - Rectify Power Key interrupt processing - Fix Kconfig related build errors - Correct a bunch of register start-up default values -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEdrbJNaO+IJqU8IdIUa+KL4f8d2EFAmXzCuoACgkQUa+KL4f8 d2EEZxAAr0/rYzEVdzbkas5OacSLcIeXMrogIiNiFUs0u4yLuNVG9Yp4BsQP96J1 anfmcaqM0c0ESfq91E5q9QGnB1Kr9MRS67F3JN6+vjo7QZCZorIjkIvQ40xqSqhz yz7l9lg3esHKvMEGuxMmDR8mOnyM0HVxul3GG4ss75uA3hJmQ871y2JSanSDs61t oRTz3us6Bydyv3RD5++ZtUHwLGtNqIiWO7ykGeeVGtYQYVOg8IbYIveR3bUW0Ij5 7JGeI9+xw29Bo0pPGgsWpKyh4P17/uO/WobpKv2w6sxSqFgBdFZQSSq6HGFMzyHy 13Hljpv1BbrOX9B2hSA+JFg2PwCCMnDKOlkepxvokLrldij4l7JJzgT+KNPCGgxz 0tMJuvJ80nk12CvBh6CGcDi0MwZJQPeEpzMkzHPT/cXY+naVA035HyOzHLEtklAc Ssjn1ZNmro8KaBrinQuVztKqdLvIptm53zJiFCGawM8E1Pkb+cW/Tyyen/oVEbnr qw7a1q3Y6yCQplrzwRBPgnRn8/ErVv76b/lxrjLDF9QVkY96XIus4k0Zx3NDXwuh kwNDwVerduXTK55FvEMxKshcXyoYklVG/+C4tn1jQb49c5d5GKk428W4MYzZG6ML 6beGWIerRdEzEmNvU0O3L0w6/tw+28rxtEOJLm6pTqHATI/CMLk= =YeJS -----END PGP SIGNATURE----- Merge tag 'mfd-next-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD updates from Lee Jones: "New Device Support: - Add support for Watchdog to ChromeOS Embedded Controller - Add support for GPIOs to ChromeOS Embedded Controller - Add supprt for Sound to MediaTek MT6357 CODEC New Functionality: - Add power-off functionality to Texas Instruments TWL series CODECs Fix-ups: - Device Tree binding adaptions/conversions/creation - Use/convert to new/better APIs/helpers/MACROs instead of hand-rolling implementations - Trivial; spelling, whitespace, clean-ups, etc - Remove superfluous code and simplify overall - Fix include lists; alphabetise, remove unused, explicitly add used - Use dev_err_probe() to clean-up error paths - Convert used cache type over to the Maple Tree in many instances - Constify a bunch of static structs - Refrain from over-riding resources provided via the firmware Bug Fixes: - Fix a clock related firmware bug on Dell XPS 9530 et al. - Repair incorrect IRQ designations - Increase buffer sizes to omit various snprintf compiler errors - Ensure errors are handled properly - Balance references and prevent resource leaks - Rectify Power Key interrupt processing - Fix Kconfig related build errors - Correct a bunch of register start-up default values" * tag 'mfd-next-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (65 commits) mfd: cs42l43: Fix wrong GPIO_FN_SEL and SPI_CLK_CONFIG1 defaults mfd: cs42l43: Fix wrong register defaults mfd: mt6397-core: Register mt6357 sound codec dt-bindings: mfd: syscon: Add ti,am62-usb-phy-ctrl compatible dt-bindings: mfd: dlg,da9063: Make #interrupt-cells required dt-bindings: mfd: Convert atmel-flexcom to json-schema mfd: kempld-core: Don't replace resources provided by ACPI mfd: cros_ec_dev: Add GPIO device if feature present on EC dt-bindings: mfd: cros-ec: Add properties for GPIO controller mfd: twl: Select MFD_CORE mfd: core: Constify the struct device_type usage mfd: rk8xx-core: Fix interrupt processing order for power key button mfd: twl4030-power: Accept standard property for power controller mfd: twl-core: Add power off implementation for twl603x dt-bindings: mfd: ti,twl: Document system-power-controller mfd: altera-sysmgr: Call of_node_put() only when of_parse_phandle() takes a ref mfd: syscon: Remove extern from function prototypes mfd: syscon: Call of_node_put() only when of_parse_phandle() takes a ref mfd: mc13xxx: Use bitfield helpers mfd: rc5t583: Convert to use maple tree register cache ... |
||
Linus Torvalds
|
a3df5d5422 |
Pin control changes for the v6.9 kernel cycle:
No core changes this time around. New drivers: - New driver for Renesas R8A779H0 also known as R-Car V4M. - New driver for the Awinic AW9523/B I2C GPIO expander. I found this living out-of-tree in OpenWrt as an upstream attempt had stalled on the finishing line, so I picked it up and finished the job. Improvements: - The Nomadik pin control driver was for years re-used out of tree for the ST STA chips, and now the IP was re-used in a MIPS automotive SoC called MobilEyeq5, so it has been split in pin control and GPIO drivers so the latter can be reused by MobilEyeq5. (Along with a long list of cleanups.) - A lot of overall cleanup and tidying up. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEElDRnuGcz/wPCXQWMQRCzN7AZXXMFAmXyJa8ACgkQQRCzN7AZ XXMQQw//aq+HJt4vtX4s9v+g/aYBDoasxOgryz96/yq+CqTBBiYh0ib7MJvy/rFs bBufH4DEvlpjzgsvaN14L6H+3hFDXKeN6VnAs3DPeBkda4bTS3VOpqNzSoOTeqG9 4a1jTe3SHche80SNW1YskTAMT0lG6WqC4RvipQ8K14DqIioX0AmgF7nJ1cddKaTK tXCWkqKY3TW2Z4edi9ZJLL6vRSQ9tJP9AugjkPX3F91yqwGHb8PV7Ggb1EXzC/X0 SW7F7Ke0lIvCYidDUpr04TOKdPTmzl2j6zoZfGU1WbypxG0LVhTKAMVk2DL2/v7T E8NNimVtGJtqxDfCVSbLc6jRgdYaLRa4dLhMCRWmevfEqFfrA79XFY6BS084T3oP 619RqbOtxc21AzlJjy2Kp7v3YpmXi6pX5E23L/d8U+0poEiM5qPqdYZaTbGNcGsV Yg4xCtxtBfPUdE3SqUCbHDzpWdSDGFsT3LSAUionvYyoW4iF8AXg8SBV1QpfzLM8 KTWTmsWG/15lCZyf7tq83EJjjVgYhGL4SMnkE8fT+smiXm95Muj1tzUjgapspMiU VpnhwtKj1hQrButWlN7+HXKseMrJ8zQJszcP5e3QdWOm7vzZGP3nXpgWosqGCImq ThjtyOKvc4+/AqgbIojDCz2BfxD8a7OPOkYHkLGJ96fA5JscBoU= =Pt9Y -----END PGP SIGNATURE----- Merge tag 'pinctrl-v6.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "No core changes this time around. New drivers: - New driver for Renesas R8A779H0 also known as R-Car V4M. - New driver for the Awinic AW9523/B I2C GPIO expander. I found this living out-of-tree in OpenWrt as an upstream attempt had stalled on the finishing line, so I picked it up and finished the job. Improvements: - The Nomadik pin control driver was for years re-used out of tree for the ST STA chips, and now the IP was re-used in a MIPS automotive SoC called MobilEyeq5, so it has been split in pin control and GPIO drivers so the latter can be reused by MobilEyeq5. (Along with a long list of cleanups) - A lot of overall cleanup and tidying up" * tag 'pinctrl-v6.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (87 commits) drivers/gpio/nomadik: move dummy nmk_gpio_dbg_show_one() to header gpio: nomadik: remove BUG_ON() in nmk_gpio_populate_chip() dt-bindings: pinctrl: qcom: update compatible name for match with driver pinctrl: aw9523: Make the driver tristate pinctrl: nomadik: fix dereference of error pointer gpio: nomadik: Back out some managed resources pinctrl: aw9523: Add proper terminator pinctrl: core: comment that pinctrl_add_gpio_range() is deprecated pinctrl: pinmux: Suppress error message for -EPROBE_DEFER pinctrl: Add driver for Awinic AW9523/B I2C GPIO Expander dt-bindings: pinctrl: Add bindings for Awinic AW9523/AW9523B gpio: nomadik: Finish conversion to use firmware node APIs gpio: nomadik: fix Kconfig dependencies inbetween pinctrl & GPIO pinctrl: da9062: Add OF table dt-bindings: pinctrl: at91: add sam9x7 pinctrl: ocelot: remove redundant assignment to variable ret gpio: nomadik: grab optional reset control and deassert it at probe gpio: nomadik: support mobileye,eyeq5-gpio gpio: nomadik: handle variadic GPIO count gpio: nomadik: support shared GPIO IRQs ... |
||
Linus Torvalds
|
b345ff698e |
auxdisplay for v6.9-1
* New driver for GPIO based 7-segment LED display (Chris Packham) * New driver for Maxim MAX6958/6959 I²C 7-segment LED display controller * Refactor linedisp library to make the above happen * Update Holtek HT16k33 driver to follow the linedisp refactoring * Convert .remove to return void in platform drivers (Uwe Kleine-König) * Fix DT schemas (Krzysztof Kozlowski) * Refresh MAINTAINERS database The following is an automated git shortlog grouped by driver: Add 7-segment LED display drivers: - Add 7-segment LED display driver - Add driver for MAX695x 7-segment LED controllers - Add 7 and 14 segment mappings to MAINTAINERS cfag12864bfb: - Convert to platform remove callback returning void dt-bindings: - auxdisplay: Add bindings for generic 7-segment LED - auxdisplay: Add Maxim MAX6958/6959 - auxdisplay: hit,hd44780: use defines for GPIO flags - auxdisplay: adjust example indentation and use generic node names hd44780: - Convert to platform remove callback returning void ht16k33: - Drop struct ht16k33_seg - Switch to use line display character mapping - Define a few helper macros - Move ht16k33_linedisp_ops down - Add default to switch-cases img-ascii-lcd: - Convert to platform remove callback returning void - Make container_of() no-op for struct linedisp linedisp: - Allocate buffer for the string - Add support for overriding character mapping - Provide struct linedisp_ops for future extension - Move exported symbols to a namespace - Add missing header(s) - Unshadow error codes in ->store() - Use unique number for id - Free allocated resources in ->release() panel: - Switch to use module_parport_driver() seg-led-gpio: - Import linedisp namespace -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEqaflIX74DDDzMJJtb7wzTHR8rCgFAmXxtUoACgkQb7wzTHR8 rCiyIg//TuyU7/1xqPW2Jri+jWDw3hdFtizE2TB6NjQhn5eS5uPjh3oFVgMPQv0x IwhALXzdG9V5s946er0APC1B7b7TppGuQf1bP/mDPuYzy+YqehEO6rSzrcHP2w6T Uj7l5ShjkUVJD60ZvognJxJKGcTEffzFTIAP8lqlLzVZ81I79rzfjSmvFnY25mbW Wv+m8fBHQTKR7cH8GZFNlhMOmJ2WmmeS0ba9GU09lXKMtvB/89yQinOi/JH5qntk kUWmD0M7rLopkKyYJhnlnuBzbCs8ZAwq8ogdrTST3g3V2PO36sxRHerC9Ve1six/ YarW+z+g/qNm/lbI/iBeNkpKczFENTXJEi5+cXseBcEPl5pV/xRjmI/RqTy6bMe+ 03rCDgrEzxFHZz7e1D88UMLN5cJoaQVkGeUpHHVS1fkAZ6euEXjFhOzS1GZ5B67H 6oaE/PJLVi0Hs0XDHKYsnhF+l6tkWrMyx2w9XykiXzCY2hkRnofPmNE8D3aOvoYQ kvl7hOBqcNbWYS73d/eUGCmISSajHcwiPPxysmw4wtKrrbe6VGbehLWG8neS/Dri Y9kpu0t86Ue7qLBcMHvW/U7lqcdKreqc5LFBCdmxa3SaEVmDb1m/RE+jwANGcYFQ fJHPmzn1zn9TPstFU2TAQU0JLu3f82kh4evKFPKt7ugwRBKCrnU= =Q7mz -----END PGP SIGNATURE----- Merge tag 'auxdisplay-v6.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/andy/linux-auxdisplay Pull auxdisplay updates from Andy Shevchenko: - New driver for GPIO based 7-segment LED display (Chris Packham) - New driver for Maxim MAX6958/6959 I²C 7-segment LED display controller - Refactor linedisp library to make the above happen - Update Holtek HT16k33 driver to follow the linedisp refactoring - Convert .remove to return void in platform drivers (Uwe Kleine-König) - Fix DT schemas (Krzysztof Kozlowski) - Refresh MAINTAINERS database * tag 'auxdisplay-v6.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/andy/linux-auxdisplay: (27 commits) auxdisplay: img-ascii-lcd: Convert to platform remove callback returning void auxdisplay: hd44780: Convert to platform remove callback returning void auxdisplay: cfag12864bfb: Convert to platform remove callback returning void auxdisplay: seg-led-gpio: Import linedisp namespace dt-bindings: auxdisplay: Add bindings for generic 7-segment LED auxdisplay: Add 7-segment LED display driver auxdisplay: Add driver for MAX695x 7-segment LED controllers dt-bindings: auxdisplay: Add Maxim MAX6958/6959 auxdisplay: ht16k33: Drop struct ht16k33_seg auxdisplay: ht16k33: Switch to use line display character mapping auxdisplay: ht16k33: Define a few helper macros auxdisplay: ht16k33: Move ht16k33_linedisp_ops down auxdisplay: ht16k33: Add default to switch-cases auxdisplay: linedisp: Allocate buffer for the string auxdisplay: linedisp: Add support for overriding character mapping auxdisplay: linedisp: Provide struct linedisp_ops for future extension auxdisplay: linedisp: Move exported symbols to a namespace auxdisplay: linedisp: Add missing header(s) auxdisplay: linedisp: Unshadow error codes in ->store() auxdisplay: linedisp: Use unique number for id ... |
||
Linus Torvalds
|
480e035fc4 |
drm for 6.9:
core: - EDID cleanups - scheduler error handling fixes - managed: add drmm_release_action() with tests - add ratelimited drm debug print - DPCD PSR early transport macro - DP tunneling and bandwidth allocation helpers - remove built-in edids - dp: Avoid AUX transfers on powered-down displays - dp: Add VSC SDP helpers cross drivers: - use new drm print helpers - switch to ->read_edid callback - gem: add stats for shared buffers plus updates to amdgpu, i915, xe syncobj: - fixes to waiting and sleeping ttm: - add tests - fix errno codes - simply busy-placement handling - fix page decryption media: - tc358743: fix v4l device registration video: - move all kernel parameters for video behind CONFIG_VIDEO sound: - remove <drm/drm_edid.h> include from header ci: - add tests for msm - fix apq8016 runner efifb: - use copy of global screen_info state vesafb: - use copy of global screen_info state simplefb: - fix logging bridge: - ite-6505: fix DP link-training bug - samsung-dsim: fix error checking in probe - samsung-dsim: add bsh-smm-s2/pro boards - tc358767: fix regmap usage - imx: add i.MX8MP HDMI PVI plus DT bindings - imx: add i.MX8MP HDMI TX plus DT bindings - sii902x: fix probing and unregistration - tc358767: limit pixel PLL input range - switch to new drm_bridge_read_edid() interface panel: - ltk050h3146w: error-handling fixes - panel-edp: support delay between power-on and enable; use put_sync in unprepare; support Mediatek MT8173 Chromebooks, BOE NV116WHM-N49 V8.0, BOE NV122WUM-N41, CSO MNC207QS1-1 plus DT bindings - panel-lvds: support EDT ETML0700Z9NDHA plus DT bindings - panel-novatek: FRIDA FRD400B25025-A-CTK plus DT bindings - add BOE TH101MB31IG002-28A plus DT bindings - add EDT ETML1010G3DRA plus DT bindings - add Novatek NT36672E LCD DSI plus DT bindings - nt36523: support 120Hz timings, fix includes - simple: fix display timings on RK32FN48H - visionox-vtdr6130: fix initialization - add Powkiddy RGB10MAX3 plus DT bindings - st7703: support panel rotation plus DT bindings - add Himax HX83112A plus DT bindings - ltk500hd1829: add support for ltk101b4029w and admatec 9904370 - simple: add BOE BP082WX1-100 8.2" panel plus DT bindungs panel-orientation-quirks: - GPD Win Mini amdgpu: - Validate DMABuf imports in compute VMs - Add RAS ACA framework - PSP 13 fixes - Misc code cleanups - Replay fixes - Atom interpretor PS, WS bounds checking - DML2 fixes - Audio fixes - DCN 3.5 Z state fixes - Remove deprecated ida_simple usage - UBSAN fixes - RAS fixes - Enable seq64 infrastructure - DC color block enablement - Documentation updates - DC documentation updates - DMCUB updates - ATHUB 4.1 support - LSDMA 7.0 support - JPEG DPG support - IH 7.0 support - HDP 7.0 support - VCN 5.0 support - SMU 13.0.6 updates - NBIO 7.11 updates - SDMA 6.1 updates - MMHUB 3.3 updates - DCN 3.5.1 support - NBIF 6.3.1 support - VPE 6.1.1 support amdkfd: - Validate DMABuf imports in compute VMs - SVM fixes - Trap handler updates and enhancements - Fix cache size reporting - Relocate the trap handler radeon: - Atom interpretor PS, WS bounds checking - Misc code cleanups xe: - new query for GuC submission version - Remove unused persistent exec_queues - Add vram frequency sysfs attributes - Add the flag XE_VM_BIND_FLAG_DUMPABLE - Drop pre-production workarounds - Drop kunit tests for unsupported platforms - Start pumbling SR-IOV support with memory based interrupts for VF - Allow to map BO in GGTT with PAT index corresponding to XE_CACHE_UC to work with memory based interrupts - Add GuC Doorbells Manager as prep work SR-IOV - Implement additional workarounds for xe2 and MTL - Program a few registers according to perfomance guide spec for Xe2 - Fix remaining 32b build issues and enable it back - Fix build with CONFIG_DEBUG_FS=n - Fix warnings from GuC ABI headers - Introduce Relay Communication for SR-IOV for VF <-> GuC <-> PF - Release mmap mappings on rpm suspend - Disable mid-thread preemption when not properly supported by hardware - Fix xe_exec by reserving extra fence slot for CPU bind - Fix xe_exec with full long running exec queue - Canonicalize addresses where needed for Xe2 and add to devcoredum - Toggle USM support for Xe2 - Only allow 1 ufence per exec / bind IOCTL - Add GuC firmware loading for Lunar Lake - Add XE_VMA_PTE_64K VMA flag i915: - Add more ADL-N PCI IDs - Enable fastboot also on older platforms - Early transport for panel replay and PSR - New ARL PCI IDs - DP TPS4 PHY test pattern support - Unify and improve VSC SDP for PSR and non-PSR cases - Refactor memory regions and improve debug logging - Rework global state serialization - Remove unused CDCLK divider fields - Unify HDCP connector logging format - Use display instead of graphics version in display code - Move VBT and opregion debugfs next to the implementation - Abstract opregion interface, use opaque type - MTL fixes - HPD handling fixes - Add GuC submission interface version query - Atomically invalidate userptr on mmu-notifier - Update handling of MMIO triggered reports - Don't make assumptions about intel_wakeref_t type - Extend driver code of Xe_LPG to Xe_LPG+ - Add flex arrays to struct i915_syncmap - Allow for very slow HuC loading - DP tunneling and bandwidth allocation support msm: - Correct bindings for MSM8976 and SM8650 platforms - Start migration of MDP5 platforms to DPU driver - X1E80100 MDSS support - DPU: - Improve DSC allocation, fixing several important corner cases - Add support for SDM630/SDM660 platforms - Simplify dpu_encoder_phys_ops - Apply fixes targeting DSC support with a single DSC encoder - Apply fixes for HCTL_EN timing configuration - X1E80100 support - Add support for YUV420 over DP - GPU: - fix sc7180 UBWC config - fix a7xx LLC config - new gpu support: a305B, a750, a702 - machine support: SM7150 (different power levels than other a618) - a7xx devcoredump support habanalabs: - configure IRQ affinity according to NUMA node - move HBM MMU page tables inside the HBM - improve device reset - check extended PCIe errors ivpu: - updates to firmware API - refactor BO allocation imx: - use devm_ functions during init hisilicon: - fix EDID includes mgag200: - improve ioremap usage - convert to struct drm_edid - Work around PCI write bursts nouveau: - disp: use kmemdup() - fix EDID includes - documentation fixes qaic: - fixes to BO handling - make use of DRM managed release - fix order of remove operations rockchip: - analogix_dp: get encoder port from DT - inno_hdmi: support HDMI for RK3128 - lvds: error-handling fixes ssd130x: - support SSD133x plus DT bindings tegra: - fix error handling tilcdc: - make use of DRM managed release v3d: - show memory stats in debugfs - Support display MMU page size vc4: - fix error handling in plane prepare_fb - fix framebuffer test in plane helpers virtio: - add venus capset defines vkms: - fix OOB access when programming the LUT - Kconfig improvements vmwgfx: - unmap surface before changing plane state - fix memory leak in error handling - documentation fixes - list command SVGA_3D_CMD_DEFINE_GB_SURFACE_V4 as invalid - fix null-pointer deref in execbuf - refactor display-mode probing - fix fencing for creating cursor MOBs - fix cursor-memory lifetime xlnx: - fix live video input for ZynqMP DPSUB lima: - fix memory leak loongson: - fail if no VRAM present meson: - switch to new drm_bridge_read_edid() interface renesas: - add RZ/G2L DU support plus DT bindings mxsfb: - Use managed mode config sun4i: - HDMI: updates to atomic mode setting mediatek: - Add display driver for MT8188 VDOSYS1 - DSI driver cleanups - Filter modes according to hardware capability - Fix a null pointer crash in mtk_drm_crtc_finish_page_flip etnaviv: - enhancements for NPU and MRT support -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEEEKbZHaGwW9KfbeusDHTzWXnEhr4FAmXxI+AACgkQDHTzWXnE hr5isxAApZ+DxesDbV8bd91KXL03vTfJtM5xVQuZoDzrr20KdTvu2EfQcCFnAUjl YtY05U9arDT4Txq5nX70Xc6I5M9HN6lqSUfsWhI6xUcR9TUollPbYwEu8IdoMaCG TRnspkiheye+DLFY6omLNH2aG1/k1IIefVWKaClFpbNPaaSHREDiY7/rkmErMBIS hrN13+6IVzX7+6fmNgHugUfdyawDJ8J9Nsc8T3Zlioljq3p+VbtStLsGeABTHSEJ MX18FwbGllI+QcXvaXM8gIg8NYKvSx/ZtlvKTpyPpTjZT3i3BpY+7yJqWDRQhiGM VTX7di1f90yWgzlYE5T33MW7Imvw3q04N7qYJ+Z1LHD/A8VyjwPUKLeul8P9ousT 0qQLSQsnuXH5AMLDh8IeLG/i0hAMWJ2UbProFSAFhd/UQHP7QOm2mmCsf79me9It qKFn6QZKvAKGZk/myTbQIVAmQWrDCpKq4i1aoKXEvcEuQUtM1lPvmMVsStVEfG+y ACaI24zSJACViH6rfhVzr74giwZX/ay0NSXqwRXfD5kX8fXb050LxLGW93iYZoHv FpdT2C8oTS1A5nsZpoxwVP35euUsp7D4J5YYbrZder2m0s0DDCVLMqdFrSVNdWDM 4ZQRiY3wCiJjSS8dpwppW0uaVGjtnGQnjQ5sQrIw0vKkwxee0TQ= =WLj9 -----END PGP SIGNATURE----- Merge tag 'drm-next-2024-03-13' of https://gitlab.freedesktop.org/drm/kernel Pull drm updates from Dave Airlie: "Highlights are usual, more AMD IP blocks for future hw, i915/xe changes, Displayport tunnelling support for i915, msm YUV over DP changes, new tests for ttm, but its mostly a lot of stuff all over the place from lots of people. core: - EDID cleanups - scheduler error handling fixes - managed: add drmm_release_action() with tests - add ratelimited drm debug print - DPCD PSR early transport macro - DP tunneling and bandwidth allocation helpers - remove built-in edids - dp: Avoid AUX transfers on powered-down displays - dp: Add VSC SDP helpers cross drivers: - use new drm print helpers - switch to ->read_edid callback - gem: add stats for shared buffers plus updates to amdgpu, i915, xe syncobj: - fixes to waiting and sleeping ttm: - add tests - fix errno codes - simply busy-placement handling - fix page decryption media: - tc358743: fix v4l device registration video: - move all kernel parameters for video behind CONFIG_VIDEO sound: - remove <drm/drm_edid.h> include from header ci: - add tests for msm - fix apq8016 runner efifb: - use copy of global screen_info state vesafb: - use copy of global screen_info state simplefb: - fix logging bridge: - ite-6505: fix DP link-training bug - samsung-dsim: fix error checking in probe - samsung-dsim: add bsh-smm-s2/pro boards - tc358767: fix regmap usage - imx: add i.MX8MP HDMI PVI plus DT bindings - imx: add i.MX8MP HDMI TX plus DT bindings - sii902x: fix probing and unregistration - tc358767: limit pixel PLL input range - switch to new drm_bridge_read_edid() interface panel: - ltk050h3146w: error-handling fixes - panel-edp: support delay between power-on and enable; use put_sync in unprepare; support Mediatek MT8173 Chromebooks, BOE NV116WHM-N49 V8.0, BOE NV122WUM-N41, CSO MNC207QS1-1 plus DT bindings - panel-lvds: support EDT ETML0700Z9NDHA plus DT bindings - panel-novatek: FRIDA FRD400B25025-A-CTK plus DT bindings - add BOE TH101MB31IG002-28A plus DT bindings - add EDT ETML1010G3DRA plus DT bindings - add Novatek NT36672E LCD DSI plus DT bindings - nt36523: support 120Hz timings, fix includes - simple: fix display timings on RK32FN48H - visionox-vtdr6130: fix initialization - add Powkiddy RGB10MAX3 plus DT bindings - st7703: support panel rotation plus DT bindings - add Himax HX83112A plus DT bindings - ltk500hd1829: add support for ltk101b4029w and admatec 9904370 - simple: add BOE BP082WX1-100 8.2" panel plus DT bindungs panel-orientation-quirks: - GPD Win Mini amdgpu: - Validate DMABuf imports in compute VMs - Add RAS ACA framework - PSP 13 fixes - Misc code cleanups - Replay fixes - Atom interpretor PS, WS bounds checking - DML2 fixes - Audio fixes - DCN 3.5 Z state fixes - Remove deprecated ida_simple usage - UBSAN fixes - RAS fixes - Enable seq64 infrastructure - DC color block enablement - Documentation updates - DC documentation updates - DMCUB updates - ATHUB 4.1 support - LSDMA 7.0 support - JPEG DPG support - IH 7.0 support - HDP 7.0 support - VCN 5.0 support - SMU 13.0.6 updates - NBIO 7.11 updates - SDMA 6.1 updates - MMHUB 3.3 updates - DCN 3.5.1 support - NBIF 6.3.1 support - VPE 6.1.1 support amdkfd: - Validate DMABuf imports in compute VMs - SVM fixes - Trap handler updates and enhancements - Fix cache size reporting - Relocate the trap handler radeon: - Atom interpretor PS, WS bounds checking - Misc code cleanups xe: - new query for GuC submission version - Remove unused persistent exec_queues - Add vram frequency sysfs attributes - Add the flag XE_VM_BIND_FLAG_DUMPABLE - Drop pre-production workarounds - Drop kunit tests for unsupported platforms - Start pumbling SR-IOV support with memory based interrupts for VF - Allow to map BO in GGTT with PAT index corresponding to XE_CACHE_UC to work with memory based interrupts - Add GuC Doorbells Manager as prep work SR-IOV - Implement additional workarounds for xe2 and MTL - Program a few registers according to perfomance guide spec for Xe2 - Fix remaining 32b build issues and enable it back - Fix build with CONFIG_DEBUG_FS=n - Fix warnings from GuC ABI headers - Introduce Relay Communication for SR-IOV for VF <-> GuC <-> PF - Release mmap mappings on rpm suspend - Disable mid-thread preemption when not properly supported by hardware - Fix xe_exec by reserving extra fence slot for CPU bind - Fix xe_exec with full long running exec queue - Canonicalize addresses where needed for Xe2 and add to devcoredum - Toggle USM support for Xe2 - Only allow 1 ufence per exec / bind IOCTL - Add GuC firmware loading for Lunar Lake - Add XE_VMA_PTE_64K VMA flag i915: - Add more ADL-N PCI IDs - Enable fastboot also on older platforms - Early transport for panel replay and PSR - New ARL PCI IDs - DP TPS4 PHY test pattern support - Unify and improve VSC SDP for PSR and non-PSR cases - Refactor memory regions and improve debug logging - Rework global state serialization - Remove unused CDCLK divider fields - Unify HDCP connector logging format - Use display instead of graphics version in display code - Move VBT and opregion debugfs next to the implementation - Abstract opregion interface, use opaque type - MTL fixes - HPD handling fixes - Add GuC submission interface version query - Atomically invalidate userptr on mmu-notifier - Update handling of MMIO triggered reports - Don't make assumptions about intel_wakeref_t type - Extend driver code of Xe_LPG to Xe_LPG+ - Add flex arrays to struct i915_syncmap - Allow for very slow HuC loading - DP tunneling and bandwidth allocation support msm: - Correct bindings for MSM8976 and SM8650 platforms - Start migration of MDP5 platforms to DPU driver - X1E80100 MDSS support - DPU: - Improve DSC allocation, fixing several important corner cases - Add support for SDM630/SDM660 platforms - Simplify dpu_encoder_phys_ops - Apply fixes targeting DSC support with a single DSC encoder - Apply fixes for HCTL_EN timing configuration - X1E80100 support - Add support for YUV420 over DP - GPU: - fix sc7180 UBWC config - fix a7xx LLC config - new gpu support: a305B, a750, a702 - machine support: SM7150 (different power levels than other a618) - a7xx devcoredump support habanalabs: - configure IRQ affinity according to NUMA node - move HBM MMU page tables inside the HBM - improve device reset - check extended PCIe errors ivpu: - updates to firmware API - refactor BO allocation imx: - use devm_ functions during init hisilicon: - fix EDID includes mgag200: - improve ioremap usage - convert to struct drm_edid - Work around PCI write bursts nouveau: - disp: use kmemdup() - fix EDID includes - documentation fixes qaic: - fixes to BO handling - make use of DRM managed release - fix order of remove operations rockchip: - analogix_dp: get encoder port from DT - inno_hdmi: support HDMI for RK3128 - lvds: error-handling fixes ssd130x: - support SSD133x plus DT bindings tegra: - fix error handling tilcdc: - make use of DRM managed release v3d: - show memory stats in debugfs - Support display MMU page size vc4: - fix error handling in plane prepare_fb - fix framebuffer test in plane helpers virtio: - add venus capset defines vkms: - fix OOB access when programming the LUT - Kconfig improvements vmwgfx: - unmap surface before changing plane state - fix memory leak in error handling - documentation fixes - list command SVGA_3D_CMD_DEFINE_GB_SURFACE_V4 as invalid - fix null-pointer deref in execbuf - refactor display-mode probing - fix fencing for creating cursor MOBs - fix cursor-memory lifetime xlnx: - fix live video input for ZynqMP DPSUB lima: - fix memory leak loongson: - fail if no VRAM present meson: - switch to new drm_bridge_read_edid() interface renesas: - add RZ/G2L DU support plus DT bindings mxsfb: - Use managed mode config sun4i: - HDMI: updates to atomic mode setting mediatek: - Add display driver for MT8188 VDOSYS1 - DSI driver cleanups - Filter modes according to hardware capability - Fix a null pointer crash in mtk_drm_crtc_finish_page_flip etnaviv: - enhancements for NPU and MRT support" * tag 'drm-next-2024-03-13' of https://gitlab.freedesktop.org/drm/kernel: (1420 commits) drm/amd/display: Removed redundant @ symbol to fix kernel-doc warnings in -next repo drm/amd/pm: wait for completion of the EnableGfxImu message drm/amdgpu/soc21: add mode2 asic reset for SMU IP v14.0.1 drm/amdgpu: add smu 14.0.1 support drm/amdgpu: add VPE 6.1.1 discovery support drm/amdgpu/vpe: add VPE 6.1.1 support drm/amdgpu/vpe: don't emit cond exec command under collaborate mode drm/amdgpu/vpe: add collaborate mode support for VPE drm/amdgpu/vpe: add PRED_EXE and COLLAB_SYNC OPCODE drm/amdgpu/vpe: add multi instance VPE support drm/amdgpu/discovery: add nbif v6_3_1 ip block drm/amdgpu: Add nbif v6_3_1 ip block support drm/amdgpu: Add pcie v6_1_0 ip headers (v5) drm/amdgpu: Add nbif v6_3_1 ip headers (v5) arch/powerpc: Remove <linux/fb.h> from backlight code macintosh/via-pmu-backlight: Include <linux/backlight.h> fbdev/chipsfb: Include <linux/backlight.h> drm/etnaviv: Restore some id values drm/amdkfd: make kfd_class constant drm/amdgpu: add ring timeout information in devcoredump ... |
||
Kent Overstreet
|
eb386617be |
bcachefs: Errcode tracepoint, documentation
Add a tracepoint for downcasting private errors to standard errors, so they can be recovered even when not logged; also, add some documentation. Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev> |
||
Miquel Raynal
|
8c8d25d959 |
SPI NOR gets the non uniform erase code cleaned. We stopped using
bitmasks for erase types and flags, and instead introduced dedicated members. We then passed the SPI NOR erase map to MTD. Users can now determine the erase regions and make informed decisions on partitions size. -----BEGIN PGP SIGNATURE----- iQEzBAABCgAdFiEEHUIqys8OyG1eHf7fS1VPR6WNFOkFAmXgjyUACgkQS1VPR6WN FOk75wf8DtDQsjGX3MBAqmLZcCBtDhso6IDGdvGanCrpk8Oi9bD61cqncdgG/lEz A7Ir7QXDPp8bvzxextJ2XyY2ekk2vfp81kJQx4Ethp7u8MrT3WLydGc4EghmC1OU FJ7vckp2u/NJZvn1h/DeRPhBxKVnDq0ez1QRyrNj37pw6OoyyGmOf3zHIKWWmAsz PAThBvqhVSnsOyJDF7deO4j2B7CDOE7KEUWGOIMhnqSj024mQX8PgLERzUzQnu3T le7lwIhtYX+Ubs9f3dboNiK3hrw95NiIEyYx6HCIUmSeA5x8mGRj8h4Kt5UmFzN4 m5ypa+RgiIZqJozU6pVYgVm3TSml2w== =hkZT -----END PGP SIGNATURE----- Merge tag 'spi-nor/for-6.9' into mtd/next SPI NOR gets the non uniform erase code cleaned. We stopped using bitmasks for erase types and flags, and instead introduced dedicated members. We then passed the SPI NOR erase map to MTD. Users can now determine the erase regions and make informed decisions on partitions size. |
||
Linus Torvalds
|
babbcc0232 |
New code for 6.9:
* Online Repair; ** New ondisk structures being repaired. - Inode's mode field by trying to obtain file type value from the a directory entry. - Quota counters. - Link counts of inodes. - FS summary counters. - rmap btrees. Support for in-memory btrees has been added to support repair of rmap btrees. ** Misc changes - Report corruption of metadata to the health tracking subsystem. - Enable indirect health reporting when resources are scarce. - Reduce memory usage while reparing refcount btree. - Extend "Bmap update" intent item to support atomic extent swapping on the realtime device. - Extend "Bmap update" intent item to support extended attribute fork and unwritten extents. ** Code cleanups - Bmap log intent. - Btree block pointer checking. - Btree readahead. - Buffer target. - Symbolic link code. * Remove mrlock wrapper around the rwsem. * Convert all the GFP_NOFS flag usages to use the scoped memalloc_nofs_save() API instead of direct calls with the GFP_NOFS. * Refactor and simplify xfile abstraction. Lower level APIs in shmem.c are required to be exported in order to achieve this. * Skip checking alignment constraints for inode chunk allocations when block size is larger than inode chunk size. * Do not submit delwri buffers collected during log recovery when an error has been encountered. * Fix SEEK_HOLE/DATA for file regions which have active COW extents. * Fix lock order inversion when executing error handling path during shrinking a filesystem. * Remove duplicate ifdefs. Signed-off-by: Chandan Babu R <chandanbabu@kernel.org> -----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQQjMC4mbgVeU7MxEIYH7y4RirJu9AUCZemMkgAKCRAH7y4RirJu 9ON5AP0Vda6sMn/ZUYoLo9ZUrUvlUb8L0dhEN5JL0XfyWW5ogAD/bH4G6pKSNyTw cSEjryuDakirdHLt5g0c+QHd2a/fzw0= =ymKk -----END PGP SIGNATURE----- Merge tag 'xfs-6.9-merge-8' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux Pull xfs updates from Chandan Babu: - Online repair updates: - More ondisk structures being repaired: - Inode's mode field by trying to obtain file type value from the a directory entry - Quota counters - Link counts of inodes - FS summary counters - Support for in-memory btrees has been added to support repair of rmap btrees - Misc changes: - Report corruption of metadata to the health tracking subsystem - Enable indirect health reporting when resources are scarce - Reduce memory usage while repairing refcount btree - Extend "Bmap update" intent item to support atomic extent swapping on the realtime device - Extend "Bmap update" intent item to support extended attribute fork and unwritten extents - Code cleanups: - Bmap log intent - Btree block pointer checking - Btree readahead - Buffer target - Symbolic link code - Remove mrlock wrapper around the rwsem - Convert all the GFP_NOFS flag usages to use the scoped memalloc_nofs_save() API instead of direct calls with the GFP_NOFS - Refactor and simplify xfile abstraction. Lower level APIs in shmem.c are required to be exported in order to achieve this - Skip checking alignment constraints for inode chunk allocations when block size is larger than inode chunk size - Do not submit delwri buffers collected during log recovery when an error has been encountered - Fix SEEK_HOLE/DATA for file regions which have active COW extents - Fix lock order inversion when executing error handling path during shrinking a filesystem - Remove duplicate ifdefs * tag 'xfs-6.9-merge-8' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (183 commits) xfs: shrink failure needs to hold AGI buffer mm/shmem.c: Use new form of *@param in kernel-doc kernel-doc: Add unary operator * to $type_param_ref xfs: use kvfree() in xlog_cil_free_logvec() xfs: xfs_btree_bload_prep_block() should use __GFP_NOFAIL xfs: fix scrub stats file permissions xfs: fix log recovery erroring out on refcount recovery failure xfs: move symlink target write function to libxfs xfs: move remote symlink target read function to libxfs xfs: move xfs_symlink_remote.c declarations to xfs_symlink_remote.h xfs: xfs_bmap_finish_one should map unwritten extents properly xfs: support deferred bmap updates on the attr fork xfs: support recovering bmap intent items targetting realtime extents xfs: add a realtime flag to the bmap update log redo items xfs: add a xattr_entry helper xfs: fix xfs_bunmapi to allow unmapping of partial rt extents xfs: move xfs_bmap_defer_add to xfs_bmap_item.c xfs: reuse xfs_bmap_update_cancel_item xfs: add a bi_entry helper xfs: remove xfs_trans_set_bmap_flags ... |
||
Stephen Boyd
|
3066c521be |
Merge branches 'clk-samsung', 'clk-imx', 'clk-rockchip', 'clk-clkdev' and 'clk-rate-exclusive' into clk-next
- Increase dev_id len for clkdev lookups * clk-samsung: (25 commits) clk: samsung: Add CPU clock support for Exynos850 clk: samsung: Pass mask to wait_until_mux_stable() clk: samsung: Keep register offsets in chip specific structure clk: samsung: Keep CPU clock chip specific data in a dedicated struct clk: samsung: Pass register layout type explicitly to CLK_CPU() clk: samsung: Pass actual CPU clock registers base to CPU_CLK() clk: samsung: Group CPU clock functions by chip clk: samsung: Use single CPU clock notifier callback for all chips clk: samsung: Reduce params count in exynos_register_cpu_clock() clk: samsung: Pull struct exynos_cpuclk into clk-cpu.c clk: samsung: Improve clk-cpu.c style dt-bindings: clock: exynos850: Add CMU_CPUCLK0 and CMU_CPUCL1 clk: samsung: gs101: add support for cmu_peric1 clk: samsung: gs101: drop extra empty line dt-bindings: clock: google,gs101-clock: add PERIC1 clock management unit clk: samsung: exynos850: Propagate SPI IPCLK rate change clk: samsung: gs101: gpio_peric0_pclk needs to be kept on clk: samsung: exynos850: Add PDMA clocks dt-bindings: clock: tesla,fsd: Fix spelling mistake clk: samsung: gs101: add support for cmu_peric0 ... * clk-imx: clk: imx: imx8mp: Fix SAI_MCLK_SEL definition clk: imx: scu: Use common error handling code in imx_clk_scu_alloc_dev() clk: imx: composite-8m: Delete two unnecessary initialisations in __imx8m_clk_hw_composite() clk: imx: composite-8m: Less function calls in __imx8m_clk_hw_composite() after error detection * clk-rockchip: clk: rockchip: rk3399: Allow to set rate of clk_i2s0_frac's parent clk: rockchip: rk3588: use linked clock ID for GATE_LINK clk: rockchip: rk3588: fix indent clk: rockchip: rk3588: fix pclk_vo0grf and pclk_vo1grf dt-bindings: clock: rk3588: add missing PCLK_VO1GRF dt-bindings: clock: rk3588: drop CLK_NR_CLKS clk: rockchip: rk3588: fix CLK_NR_CLKS usage clk: rockchip: rk3568: Add PLL rate for 128MHz * clk-clkdev: clkdev: Update clkdev id usage to allow for longer names * clk-rate-exclusive: clk: Add a devm variant of clk_rate_exclusive_get() |
||
Stephen Boyd
|
68e4ebd542 |
Merge branches 'clk-remove', 'clk-amlogic', 'clk-qcom', 'clk-parent' and 'clk-microchip' into clk-next
* clk-remove: clk: starfive: jh7110-vout: Convert to platform remove callback returning void clk: starfive: jh7110-isp: Convert to platform remove callback returning void clk: imx: imx8-acm: Convert to platform remove callback returning void * clk-amlogic: clk: meson: Add missing clocks to axg_clk_regmaps * clk-qcom: (62 commits) clk: qcom: gcc-ipq5018: fix register offset for GCC_UBI0_AXI_ARES reset clk: qcom: gcc-ipq5018: fix 'halt_reg' offset of 'gcc_pcie1_pipe_clk' clk: qcom: gcc-ipq5018: fix 'enable_reg' offset of 'gcc_gmac0_sys_clk' clk: qcom: camcc-x1e80100: Fix missing DT_IFACE enum in x1e80100 camcc clk: qcom: mmcc-msm8974: fix terminating of frequency table arrays clk: qcom: mmcc-apq8084: fix terminating of frequency table arrays clk: qcom: camcc-sc8280xp: fix terminating of frequency table arrays clk: qcom: gcc-ipq9574: fix terminating of frequency table arrays clk: qcom: gcc-ipq8074: fix terminating of frequency table arrays clk: qcom: gcc-ipq6018: fix terminating of frequency table arrays clk: qcom: gcc-ipq5018: fix terminating of frequency table arrays clk: qcom: dispcc-sdm845: Adjust internal GDSC wait times dt-bindings: clk: qcom: drop the SC7180 Modem subsystem clock controller clk: qcom: drop the SC7180 Modem subsystem clock driver clk: qcom: Use qcom_branch_set_clk_en() clk: qcom: branch: Add a helper for setting the enable bit clk: qcom: dispcc-sm8250: Make clk_init_data and pll_vco const clk: qcom: gcc-sc8180x: Add missing UFS QREF clocks clk: qcom: gcc-msm8953: add more resets clk: qcom: videocc-*: switch to module_platform_driver ... * clk-parent: clk: Fix clk_core_get NULL dereference * clk-microchip: clk: microchip: mpfs: convert MSSPLL outputs to clk_divider clk: microchip: mpfs: add missing MSSPLL outputs clk: microchip: mpfs: setup for using other mss pll outputs clk: microchip: mpfs: split MSSPLL in two dt-bindings: can: mpfs: add missing required clock dt-bindings: clock: mpfs: add more MSSPLL output definitions |
||
Stephen Boyd
|
ee2d2a4e9c |
Merge branches 'clk-aspeed', 'clk-keystone', 'clk-mobileye' and 'clk-allwinner' into clk-next
* clk-aspeed: clk: ast2600: Add FSI parent clock with correct rate dt-bindings: clock: ast2600: Add FSI clock * clk-keystone: clk: keystone: sci-clk: Adding support for non contiguous clocks * clk-mobileye: dt-bindings: reset: mobileye,eyeq5-reset: add bindings dt-bindings: clock: mobileye,eyeq5-clk: add bindings clk: fixed-factor: add fwname-based constructor functions clk: fixed-factor: add optional accuracy support * clk-allwinner: clk: sunxi: usb: fix kernel-doc warnings clk: sunxi: sun9i-cpus: fix kernel-doc warnings clk: sunxi: a20-gmac: fix kernel-doc warnings |
||
Stephen Boyd
|
cf5f06c8ee |
Merge branches 'clk-renesas', 'clk-cleanup', 'clk-hisilicon', 'clk-mediatek' and 'clk-bulk' into clk-next
- Add a devm_clk_bulk_get_all_enable() API to get and enable all clks for a device - Fix some static checker errors in the hisilicon clk driver * clk-renesas: (25 commits) clk: renesas: r8a779h0: Add RPC-IF clock clk: renesas: r8a779h0: Add SYS-DMAC clocks clk: renesas: r8a779h0: Add SDHI clock clk: renesas: r8a779h0: Add EtherAVB clocks clk: renesas: r9a07g04[34]: Fix typo for sel_shdi variable clk: renesas: r9a07g04[34]: Use SEL_SDHI1_STS status configuration for SD1 mux clk: renesas: r8a779f0: Correct PFC/GPIO parent clock clk: renesas: r8a779g0: Correct PFC/GPIO parent clocks clk: renesas: r8a779h0: Add I2C clocks clk: renesas: r8a779h0: Add watchdog clock clk: renesas: r8a779h0: Add PFC/GPIO clocks clk: renesas: r8a779g0: Fix PCIe clock name clk: renesas: cpg-mssr: Add support for R-Car V4M clk: renesas: rcar-gen4: Add support for FRQCRC1 clk: renesas: r9a07g043: Add clock and reset entries for CRU clk: renesas: r9a08g045: Add clock and reset support for watchdog dt-bindings: clock: Add R8A779H0 V4M CPG Core Clock Definitions dt-bindings: clock: renesas,cpg-mssr: Document R-Car V4M support dt-bindings: power: Add r8a779h0 SYSC power domain definitions dt-bindings: power: renesas,rcar-sysc: Document R-Car V4M support ... * clk-cleanup: clk: zynq: Prevent null pointer dereference caused by kmalloc failure clk: fractional-divider: Use bit operations consistently clk: fractional-divider: Move mask calculations out of lock clk: ti: dpll3xxx: use correct function names in kernel-doc clk: clocking-wizard: Remove redundant initialization of pointer div_addr clk: keystone: sci-clk: match func name comment to actual clk: cdce925: Remove redundant assignment to variable 'rate' MAINTAINERS: drop Sekhar Nori * clk-hisilicon: clk: hisilicon: Use devm_kcalloc() instead of devm_kzalloc() clk: hisilicon: hi3559a: Fix an erroneous devm_kfree() clk: hisilicon: hi3519: Release the correct number of gates in hi3519_clk_unregister() * clk-mediatek: clk: mediatek: clk-mt8173-apmixedsys: Use common error handling code in clk_mt8173_apmixed_probe() clk: mediatek: add infracfg reset controller for mt7988 dt-bindings: reset: mediatek: add MT7988 infracfg reset IDs dt-bindings: clock: mediatek: convert SSUSBSYS to the json-schema clock dt-bindings: clock: mediatek: convert PCIESYS to the json-schema clock dt-bindings: clock: mediatek: convert hifsys to the json-schema clock clk: mediatek: mt7981-topckgen: flag SGM_REG_SEL as critical clk: mediatek: mt8183: Correct parent of CLK_INFRA_SSPM_32K_SELF clk: mediatek: mt7622-apmixedsys: Fix an error handling path in clk_mt8135_apmixed_probe() clk: mediatek: mt8135: Fix an error handling path in clk_mt8135_apmixed_probe() * clk-bulk: clk: Provide managed helper to get and enable bulk clocks |
||
Linus Torvalds
|
27b984af7a |
Hi,
This is my pull request for Linux v6.9. Contains small scope bug fixes and device tree updates. No new features. BR, Jarkko -----BEGIN PGP SIGNATURE----- iIgEABYIADAWIQRE6pSOnaBC00OEHEIaerohdGur0gUCZe+gDBIcamFya2tvQGtl cm5lbC5vcmcACgkQGnq6IXRrq9JyzwD7B+kWBSArbN/zG+9AnsvlauMt10euyOma Al42W6JZjbwBAKLbiVJOirULZNprSbuDgZQOZC6izAzHHx/RPQKbkFQB =zJ1F -----END PGP SIGNATURE----- Merge tag 'tpmdd-v6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd Pull tpm updates from Jarkko Sakkinen: "Small bug fixes and device tree updates. No new features" * tag 'tpmdd-v6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd: tpm: tis_i2c: Add compatible string nuvoton,npct75x tpm_tis: Add compatible string atmel,at97sc3204 tpm_tis_spi: Add compatible string atmel,attpm20p dt-bindings: tpm: Add compatible string atmel,attpm20p tpm,tpm_tis: Avoid warning splat at shutdown tpm/tpm_ftpm_tee: fix all kernel-doc warnings |
||
Linus Torvalds
|
9687d4ac58 |
imx: add support for i.MX95 ELE/V2X MU
misc: I will be signing-off from my personal gmail id from now on. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEE6EwehDt/SOnwFyTyf9lkf8eYP5UFAmXuS8UACgkQf9lkf8eY P5Ut9xAAiK6ZL5sbemKzW+SqqovFR2H2tsajORl1ySU/rFE9e3+oVMX3SEPp4vJx trd05wdrxJdBrmkmM64uKd/tMow7KUZ+fjnsDvhDiRhVvY3E+h6FiDCuHW8I6mMr SvEXF1wXA6iZQnPRg6QyJwniWJ/Ds3EA4IhkWrvqbaEB8N7djyKBKYkthL4Bg7/H l1I9e9mBw3yTwlrVjUXQjocNTqAiEHS5gJuNXH7C8Ovj7g37CpaC934uIc1M72Ww IQUMSR4QBaDYEZ1NuKrevT1Tr9FbqPMpH1BN46H0OYL4APO+gyXV1dsBPtqvItVs 2Ew5JWryQ5m1WL11pER5dUnhMz9mRfSBttrLg5JnqJO22Aif/jYgnu7hcfD1H20y 9j87hL5RH1CnuZTGg/MzakOGiv5d91U73kofVMxsYO+NbAL7qtdV/QPV1p0bd1wA 9B06gsfIfByV+v3A2qGVfle+OjW/bzRZeWpa2UqQBnw0NlsWo8EvBuU6+6Bh18IO 6zViMADGqk3uq7nzJameuABfTH8+xEWuXBJtbsZr9v3ZUZzg6M3IODSn8YdwJBWS D1FvoRBgUzSlRjEIRwGSE7GGaa/tEhI69ccqpjKQjvTYwpGFvKrg2ocEDRKLTa4L nlgDKpYoJHm7cItsG/9chxdxWiiPWmeVjx/o75qpNHTPqMglv2E= =+39i -----END PGP SIGNATURE----- Merge tag 'mailbox-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/jassibrar/mailbox Pull mailbox updates from Jassi Brar: - imx: add support for i.MX95 ELE/V2X MU - misc: I will be signing-off from my personal gmail id from now on * tag 'mailbox-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/jassibrar/mailbox: mailbox: imx: support i.MX95 Generic/ELE/V2X MU mailbox: imx: populate sub-nodes mailbox: imx: get RR/TR registers num from Parameter register mailbox: imx: support return value of init dt-bindings: mailbox: fsl,mu: add i.MX95 Generic/ELE/V2X MU compatible |
||
Linus Torvalds
|
9434467959 |
ACPI updates for 6.9-rc1
- Rearrange Device Check and Bus Check notification handling in the ACPI device hotplug code to make it get the "enabled" _STA bit into account (Rafael Wysocki). - Modify acpi_processor_add() to skip processors with the "enabled" _STA bit clear, as per the specification (Rafael Wysocki). - Stop failing Device Check notification handling without a valid reason (Rafael Wysocki). - Defer enumeration of devices that depend on a device with an ACPI device ID equalt to INTC10CF to address probe ordering issues on some platforms (Wentong Wu). - Constify acpi_bus_type (Ricardo Marliere). - Make the ACPI-specific suspend-to-idle code take the Low-Power S0 Idle MSFT UUID into account on non-AMD systems (Rafael Wysocki). - Add ACPI IRQ override quirks for some new platforms (Sergey Kalinichev, Maxim Kudinov, Alexey Froloff, Sviatoslav Harasymchuk, Nicolas Haye). - Make the NFIT parsing code use acpi_evaluate_dsm_typed() (Andy Shevchenko). - Fix a memory leak in acpi_processor_power_exit() (Armin Wolf). - Make it possible to quirk the CSI-2 and MIPI DisCo for Imaging properties parsing and add a quirk for Dell XPS 9315 (Sakari Ailus). - Prevent false-positive static checker warnings from triggering by intializing some variables in the ACPI thermal code to zero (Colin Ian King). - Add DELL0501 handling to acpi_quirk_skip_serdev_enumeration() and make that function generic (Hans de Goede). - Make the ACPI backlight code handle fetching EDID that is longer than 256 bytes (Mario Limonciello). - Skip initialization of GHES_ASSIST structures for Machine Check Architecture in APEI (Avadhut Naik). - Convert several plaform drivers in the ACPI subsystem to using a remove callback that returns void (Uwe Kleine-König). - Drop the long-deprecated custom_method debugfs interface that is problematic from the security standpoint (Rafael Wysocki). - Use %pe in a couple of places in the ACPI code for easier error decoding (Onkarnath). - Fix register width information handling during system memory accesses in the ACPI CPPC library (Jarred White). - Add AMD CPPC V2 support for family 17h processors to the ACPI CPPC library (Perry Yuan). -----BEGIN PGP SIGNATURE----- iQJGBAABCAAwFiEE4fcc61cGeeHD/fCwgsRv/nhiVHEFAmXvJFISHHJqd0Byand5 c29ja2kubmV0AAoJEILEb/54YlRxtWMP/0IySac8M0jkQJrlJeIqXHhV/akwpe5H kWtuT8bZ8iiQmB+orDW+hpLhdATc2vv1XPRApnkkd9QtrLEVBBIoLrDxzUJy/tzv 0qgj2s0A1pc6gRpX1y3Wc94U3PnTzOodVpjZq6L9rGQ3enBkIU7H3CWs2LIq3VfB lUSY1dmVB2rv1MHfsoxTM6eiRYEZSAc3v8b0jpIjfaHsxdUPsqZLMPXTVzgGWfu4 ePCN1oDKX9xQkVV9/hnxBYwTSO+ySBq1jgtG2PaqRmJXIaZR/24A1tHTr2UQvTss x39WnjWIrKOwO6TfwoX8KlsdBaJeQo0biH42QQV08UIYUWfQmoUVVffZMPGrlGvV F3vPMLZADMROJhtfoD4hXIcj+Asa/uqi6lKN1mctb0akozOGlHbX4yNXq4MZS9Hj sXO9gMXgWjh5cnC/NSekcdVbLbARj2g7JWdpq1dZmgh9eaXP07/D6DcrVbcdZSHs ySb6DNNAEXPL0PgSU+cLiwRRH43C+ilVz/OMrdHxb4jSuAVDluD4hwi1IwwB4feG k0s9i0OQKAkC/9UXcJrlTFs1fE4ftZ0gYVZDiSeDDy9FUo1ZYCRhOP7yfrjoCHhH Wc7sllUKHsy1TPi3Wh3ANxUaZhviNn59rL3JPAKeX1Qjx2LB+qHS6j08/v/F3m6W Srp8VJsItb/D =Yngi -----END PGP SIGNATURE----- Merge tag 'acpi-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI updates from Rafael Wysocki: "These modify the ACPI device events and processor enumeration code to take the 'enabled' _STA bit into account as mandated by the ACPI specification, convert several platform drivers to using a remove callback that returns void, add some new quirks for ACPI IRQ override and other things, address assorted issues and clean up code. Specifics: - Rearrange Device Check and Bus Check notification handling in the ACPI device hotplug code to make it get the "enabled" _STA bit into account (Rafael Wysocki) - Modify acpi_processor_add() to skip processors with the "enabled" _STA bit clear, as per the specification (Rafael Wysocki) - Stop failing Device Check notification handling without a valid reason (Rafael Wysocki) - Defer enumeration of devices that depend on a device with an ACPI device ID equalt to INTC10CF to address probe ordering issues on some platforms (Wentong Wu) - Constify acpi_bus_type (Ricardo Marliere) - Make the ACPI-specific suspend-to-idle code take the Low-Power S0 Idle MSFT UUID into account on non-AMD systems (Rafael Wysocki) - Add ACPI IRQ override quirks for some new platforms (Sergey Kalinichev, Maxim Kudinov, Alexey Froloff, Sviatoslav Harasymchuk, Nicolas Haye) - Make the NFIT parsing code use acpi_evaluate_dsm_typed() (Andy Shevchenko) - Fix a memory leak in acpi_processor_power_exit() (Armin Wolf) - Make it possible to quirk the CSI-2 and MIPI DisCo for Imaging properties parsing and add a quirk for Dell XPS 9315 (Sakari Ailus) - Prevent false-positive static checker warnings from triggering by intializing some variables in the ACPI thermal code to zero (Colin Ian King) - Add DELL0501 handling to acpi_quirk_skip_serdev_enumeration() and make that function generic (Hans de Goede) - Make the ACPI backlight code handle fetching EDID that is longer than 256 bytes (Mario Limonciello) - Skip initialization of GHES_ASSIST structures for Machine Check Architecture in APEI (Avadhut Naik) - Convert several plaform drivers in the ACPI subsystem to using a remove callback that returns void (Uwe Kleine-König) - Drop the long-deprecated custom_method debugfs interface that is problematic from the security standpoint (Rafael Wysocki) - Use %pe in a couple of places in the ACPI code for easier error decoding (Onkarnath) - Fix register width information handling during system memory accesses in the ACPI CPPC library (Jarred White) - Add AMD CPPC V2 support for family 17h processors to the ACPI CPPC library (Perry Yuan)" * tag 'acpi-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (35 commits) ACPI: resource: Use IRQ override on Maibenben X565 ACPI: CPPC: Use access_width over bit_width for system memory accesses ACPI: CPPC: enable AMD CPPC V2 support for family 17h processors ACPI: APEI: Skip initialization of GHES_ASSIST structures for Machine Check Architecture ACPI: scan: Consolidate Device Check and Bus Check notification handling ACPI: scan: Rework Device Check and Bus Check notification handling ACPI: scan: Make acpi_processor_add() check the device enabled bit ACPI: scan: Relocate acpi_bus_trim_one() ACPI: scan: Fix device check notification handling ACPI: resource: Add MAIBENBEN X577 to irq1_edge_low_force_override ACPI: pfr_update: Convert to platform remove callback returning void ACPI: pfr_telemetry: Convert to platform remove callback returning void ACPI: fan: Convert to platform remove callback returning void ACPI: GED: Convert to platform remove callback returning void ACPI: DPTF: Convert to platform remove callback returning void ACPI: AGDI: Convert to platform remove callback returning void ACPI: TAD: Convert to platform remove callback returning void ACPI: APEI: GHES: Convert to platform remove callback returning void ACPI: property: Polish ignoring bad data nodes ACPI: thermal_lib: Initialize temp_decik to zero ... |
||
Linus Torvalds
|
07abb19a9b |
Power management updates for 6.9-rc1
- Allow the Energy Model to be updated dynamically (Lukasz Luba). - Add support for LZ4 compression algorithm to the hibernation image creation and loading code (Nikhil V). - Fix and clean up system suspend statistics collection (Rafael Wysocki). - Simplify device suspend and resume handling in the power management core code (Rafael Wysocki). - Fix PCI hibernation support description (Yiwei Lin). - Make hibernation take set_memory_ro() return values into account as appropriate (Christophe Leroy). - Set mem_sleep_current during kernel command line setup to avoid an ordering issue with handling it (Maulik Shah). - Fix wake IRQs handling when pm_runtime_force_suspend() is used as a driver's system suspend callback (Qingliang Li). - Simplify pm_runtime_get_if_active() usage and add a replacement for pm_runtime_put_autosuspend() (Sakari Ailus). - Add a tracepoint for runtime_status changes tracking (Vilas Bhat). - Fix section title markdown in the runtime PM documentation (Yiwei Lin). - Enable preferred core support in the amd-pstate cpufreq driver (Meng Li). - Fix min_perf assignment in amd_pstate_adjust_perf() and make the min/max limit perf values in amd-pstate always stay within the (highest perf, lowest perf) range (Tor Vic, Meng Li). - Allow intel_pstate to assign model-specific values to strings used in the EPP sysfs interface and make it do so on Meteor Lake (Srinivas Pandruvada). - Drop long-unused cpudata::prev_cummulative_iowait from the intel_pstate cpufreq driver (Jiri Slaby). - Prevent scaling_cur_freq from exceeding scaling_max_freq when the latter is an inefficient frequency (Shivnandan Kumar). - Change default transition delay in cpufreq to 2ms (Qais Yousef). - Remove references to 10ms minimum sampling rate from comments in the cpufreq code (Pierre Gondois). - Honour transition_latency over transition_delay_us in cpufreq (Qais Yousef). - Stop unregistering cpufreq cooling on CPU hot-remove (Viresh Kumar). - General enhancements / cleanups to ARM cpufreq drivers (tianyu2, Nícolas F. R. A. Prado, Erick Archer, Arnd Bergmann, Anastasia Belova). - Update cpufreq-dt-platdev to block/approve devices (Richard Acayan). - Make the SCMI cpufreq driver get a transition delay value from firmware (Pierre Gondois). - Prevent the haltpoll cpuidle governor from shrinking guest poll_limit_ns below grow_start (Parshuram Sangle). - Avoid potential overflow in integer multiplication when computing cpuidle state parameters (C Cheng). - Adjust MWAIT hint target C-state computation in the ACPI cpuidle driver and in intel_idle to return a correct value for C0 (He Rongguang). - Address multiple issues in the TPMI RAPL driver and add support for new platforms (Lunar Lake-M, Arrow Lake) to Intel RAPL (Zhang Rui). - Fix freq_qos_add_request() return value check in dtpm_cpu (Daniel Lezcano). - Fix kernel-doc for dtpm_create_hierarchy() (Yang Li). - Fix file leak in get_pkg_num() in x86_energy_perf_policy (Samasth Norway Ananda). - Fix cpupower-frequency-info.1 man page typo (Jan Kratochvil). - Fix a couple of warnings in the OPP core code related to W=1 builds (Viresh Kumar). - Move dev_pm_opp_{init|free}_cpufreq_table() to pm_opp.h (Viresh Kumar). - Extend dev_pm_opp_data with turbo support (Sibi Sankar). - dt-bindings: drop maxItems from inner items (David Heidelberg). -----BEGIN PGP SIGNATURE----- iQJGBAABCAAwFiEE4fcc61cGeeHD/fCwgsRv/nhiVHEFAmXvI/ISHHJqd0Byand5 c29ja2kubmV0AAoJEILEb/54YlRx24sP/jxg6fOGme8raHQvpTXG3/H56wlGzQ4P YUvvKUXnfD3yf1zNISsUl7VQebZqDt8rygkwSdymXlUVZX1eubN0RpCFc0F8GZuc THG/YQhYQr/9zro3FpKhfDj5evk21PCQzjf+dGvfQF9qVMxNPG1JzEFK6PnolT5X 2BvkonY1XFWZjCMbZ83B/jt35lTDb0cmeNbCpfD5UJgcnxmMOtZYpORdyfPWTJpG GVCwmAFVVXxXlust/AIpt3mmOpKzSA9GnrtJkhtQe5GN+Y4OjnJiFJmTC7EfCctj JlWgVUA716mtFMUrjXgjfI54firF2oQpqaSa2HG/V/A96JWQqjarGz5dAV1IrPEt ZmYpvMe4E90S411wF1OWyrEqjXUuDnH1OWUvUdWSt4E7DhFw3esDi/jLW2tyVKAT hIy+/O4wzbDSTX/h9Cgt1Qjhew6lKUIwvhEXclB3fuJ+JoviWNkC9lnK93e2H0A3 VYfkd/lpUD74035l0FrCJ/49MjX9kqrsn+TipHsIlSXAi8ZRdKbVvxOTD8RYudcI GvCiDDrkMgNwGlyedgbtTBUepCvSg93b+vVmRj7YMPtBhioOUo3qCn6wpqhxfnth 9BCnPW7JxqUw/NJdlk9hKumaUZq+MK8G+kdYcIDg6xmAkWSUVP2QKlWavfMCxqRP +dN6T2iHsKFe =UePT -----END PGP SIGNATURE----- Merge tag 'pm-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management updates from Rafael Wysocki: "From the functional perspective, the most significant change here is the addition of support for Energy Models that can be updated dynamically at run time. There is also the addition of LZ4 compression support for hibernation, the new preferred core support in amd-pstate, new platforms support in the Intel RAPL driver, new model-specific EPP handling in intel_pstate and more. Apart from that, the cpufreq default transition delay is reduced from 10 ms to 2 ms (along with some related adjustments), the system suspend statistics code undergoes a significant rework and there is a usual bunch of fixes and code cleanups all over. Specifics: - Allow the Energy Model to be updated dynamically (Lukasz Luba) - Add support for LZ4 compression algorithm to the hibernation image creation and loading code (Nikhil V) - Fix and clean up system suspend statistics collection (Rafael Wysocki) - Simplify device suspend and resume handling in the power management core code (Rafael Wysocki) - Fix PCI hibernation support description (Yiwei Lin) - Make hibernation take set_memory_ro() return values into account as appropriate (Christophe Leroy) - Set mem_sleep_current during kernel command line setup to avoid an ordering issue with handling it (Maulik Shah) - Fix wake IRQs handling when pm_runtime_force_suspend() is used as a driver's system suspend callback (Qingliang Li) - Simplify pm_runtime_get_if_active() usage and add a replacement for pm_runtime_put_autosuspend() (Sakari Ailus) - Add a tracepoint for runtime_status changes tracking (Vilas Bhat) - Fix section title markdown in the runtime PM documentation (Yiwei Lin) - Enable preferred core support in the amd-pstate cpufreq driver (Meng Li) - Fix min_perf assignment in amd_pstate_adjust_perf() and make the min/max limit perf values in amd-pstate always stay within the (highest perf, lowest perf) range (Tor Vic, Meng Li) - Allow intel_pstate to assign model-specific values to strings used in the EPP sysfs interface and make it do so on Meteor Lake (Srinivas Pandruvada) - Drop long-unused cpudata::prev_cummulative_iowait from the intel_pstate cpufreq driver (Jiri Slaby) - Prevent scaling_cur_freq from exceeding scaling_max_freq when the latter is an inefficient frequency (Shivnandan Kumar) - Change default transition delay in cpufreq to 2ms (Qais Yousef) - Remove references to 10ms minimum sampling rate from comments in the cpufreq code (Pierre Gondois) - Honour transition_latency over transition_delay_us in cpufreq (Qais Yousef) - Stop unregistering cpufreq cooling on CPU hot-remove (Viresh Kumar) - General enhancements / cleanups to ARM cpufreq drivers (tianyu2, Nícolas F. R. A. Prado, Erick Archer, Arnd Bergmann, Anastasia Belova) - Update cpufreq-dt-platdev to block/approve devices (Richard Acayan) - Make the SCMI cpufreq driver get a transition delay value from firmware (Pierre Gondois) - Prevent the haltpoll cpuidle governor from shrinking guest poll_limit_ns below grow_start (Parshuram Sangle) - Avoid potential overflow in integer multiplication when computing cpuidle state parameters (C Cheng) - Adjust MWAIT hint target C-state computation in the ACPI cpuidle driver and in intel_idle to return a correct value for C0 (He Rongguang) - Address multiple issues in the TPMI RAPL driver and add support for new platforms (Lunar Lake-M, Arrow Lake) to Intel RAPL (Zhang Rui) - Fix freq_qos_add_request() return value check in dtpm_cpu (Daniel Lezcano) - Fix kernel-doc for dtpm_create_hierarchy() (Yang Li) - Fix file leak in get_pkg_num() in x86_energy_perf_policy (Samasth Norway Ananda) - Fix cpupower-frequency-info.1 man page typo (Jan Kratochvil) - Fix a couple of warnings in the OPP core code related to W=1 builds (Viresh Kumar) - Move dev_pm_opp_{init|free}_cpufreq_table() to pm_opp.h (Viresh Kumar) - Extend dev_pm_opp_data with turbo support (Sibi Sankar) - dt-bindings: drop maxItems from inner items (David Heidelberg)" * tag 'pm-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (95 commits) dt-bindings: opp: drop maxItems from inner items OPP: debugfs: Fix warning around icc_get_name() OPP: debugfs: Fix warning with W=1 builds cpufreq: Move dev_pm_opp_{init|free}_cpufreq_table() to pm_opp.h OPP: Extend dev_pm_opp_data with turbo support Fix cpupower-frequency-info.1 man page typo cpufreq: scmi: Set transition_delay_us firmware: arm_scmi: Populate fast channel rate_limit firmware: arm_scmi: Populate perf commands rate_limit cpuidle: ACPI/intel: fix MWAIT hint target C-state computation PM: sleep: wakeirq: fix wake irq warning in system suspend powercap: dtpm: Fix kernel-doc for dtpm_create_hierarchy() function cpufreq: Don't unregister cpufreq cooling on CPU hotplug PM: suspend: Set mem_sleep_current during kernel command line setup cpufreq: Honour transition_latency over transition_delay_us cpufreq: Limit resolving a frequency to policy min/max Documentation: PM: Fix runtime_pm.rst markdown syntax cpufreq: amd-pstate: adjust min/max limit perf cpufreq: Remove references to 10ms min sampling rate cpufreq: intel_pstate: Update default EPPs for Meteor Lake ... |
||
Linus Torvalds
|
a070a08d00 |
Core:
- Log a message when unused PM domains gets disabled - Scale down parent/child performance states in the reverse order Providers: - qcom: rpmpd: Add power domains support for MSM8974, MSM8974PRO, PMA8084 and PM8841 - renesas: rcar-gen4-sysc: Reduce atomic delays - renesas: rcar-sysc: Adjust the waiting time to cover the worst case - renesas: r8a779h0-sysc: Add support for the r8a779h0 PM domains - imx: imx8mp-blk-ctrl: Add the fdcc clock to the hdmimix domains - imx: imx8mp-blk-ctrl: Error out if domains are missing in DT Improve support for multiple PM domains: - Add two helper functions to attach/detach multiple PM domains - Convert a couple of drivers to use the new helper functions -----BEGIN PGP SIGNATURE----- iQJLBAABCgA1FiEEugLDXPmKSktSkQsV/iaEJXNYjCkFAmXvJJIXHHVsZi5oYW5z c29uQGxpbmFyby5vcmcACgkQ/iaEJXNYjClQDQ/+JNgDl9Kq0hTid2wWyL498flc bB7kuaIdjkConPUNZ5gP0usirOGoGomHuCP4X5Ms2tWf/ZODkFDoyRhDK2sYUhlY wN7msCaQdMbaXXu+uglsxOKttu7N4lbJ1TwgMNgDiwt5CYirJa7GpRH96/3sIW2B vf8hADeWKZsuJ/2ikLPB4WFOHio5/HxqDp6zq2yCnw4rwG4zF209V3JAx/mMcUhd hXxxhBNVcqngqP8oJUvg6eKY6pWlRnPLvQOOMUFEgxtoCEUda3pw+SXO2JVUgI1x x81FneC2kPSu7/kg9G9hjWfRHs3j3eXz4fXn9C8yPvla0DFDT0jbgnJOqSZBQMd8 4vOLaaeEcVArYg60VC13ez+vldUGAtSfcclzEPOmqQH+cihkbPeRvpve4c0YJkGy kEv2/fIFIJdDBxlg9vrTCczQnaYxou5jYiMkSBec1HBPnntwqQ2ji1hx3n1C+LwQ 0AAQMldz+57oJlhso0iWDwidPairn6NprscaEINiOHdRKyrOJGr7s5vQaXy23bIc U7XHJLZ5cho4YECymLd7oyh30HyPz0Ya4E+NE0pf/Dj8ZZOpiUYnvs4sQuxhX9Fi i/3/cbyZrdSy4bQ2ld1sQV4BM+eYVAOT9l4zNFXbdhMpAjpAbSiStaEHrczhrnGI Fc9BvaDowjufngzhgd8= =KslH -----END PGP SIGNATURE----- Merge tag 'pmdomain-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm Pull pmdomain updates from Ulf Hansson: "Core: - Log a message when unused PM domains gets disabled - Scale down parent/child performance states in the reverse order Providers: - qcom: rpmpd: Add power domains support for MSM8974, MSM8974PRO, PMA8084 and PM8841 - renesas: rcar-gen4-sysc: Reduce atomic delays - renesas: rcar-sysc: Adjust the waiting time to cover the worst case - renesas: r8a779h0-sysc: Add support for the r8a779h0 PM domains - imx: imx8mp-blk-ctrl: Add the fdcc clock to the hdmimix domains - imx: imx8mp-blk-ctrl: Error out if domains are missing in DT Improve support for multiple PM domains: - Add two helper functions to attach/detach multiple PM domains - Convert a couple of drivers to use the new helper functions" * tag 'pmdomain-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm: (22 commits) pmdomain: renesas: rcar-gen4-sysc: Reduce atomic delays pmdomain: renesas: Adjust the waiting time to cover the worst case pmdomain: qcom: rpmpd: Add MSM8974PRO+PMA8084 power domains pmdomain: qcom: rpmpd: Add MSM8974+PM8841 power domains pmdomain: core: constify of_phandle_args in add device and subdomain pmdomain: core: constify of_phandle_args in xlate media: venus: Convert to dev_pm_domain_attach|detach_list() for vcodec remoteproc: qcom_q6v5_adsp: Convert to dev_pm_domain_attach|detach_list() remoteproc: imx_rproc: Convert to dev_pm_domain_attach|detach_list() remoteproc: imx_dsp_rproc: Convert to dev_pm_domain_attach|detach_list() PM: domains: Add helper functions to attach/detach multiple PM domains pmdomain: imx8mp-blk-ctrl: imx8mp_blk: Add fdcc clock to hdmimix domain pmdomain: mediatek: Use devm_platform_ioremap_resource() in init_scp() pmdomain: renesas: r8a779h0-sysc: Add r8a779h0 support pmdomain: imx8mp-blk-ctrl: Error out if domains are missing in DT pmdomain: ti: Add a null pointer check to the omap_prm_domain_init pmdomain: renesas: rcar-gen4-sysc: Remove unneeded includes pmdomain: core: Print a message when unused power domains are disabled pmdomain: qcom: rpmpd: Keep one RPM handle for all RPMPDs pmdomain: core: Scale down parent/child performance states in reverse order ... |
||
Linus Torvalds
|
15223fdbdf |
hwmon updates for v6.9
* New drivers for - Amphenol ChipCap 2 - ASPEED g6 PWM/Fan tach - Astera Labs PT5161L retimer - ASUS ROG RYUJIN II 360 AIO cooler - LTC4282 - Microsoft Surface devices - MPS MPQ8785 Synchronous Step-Down Converter - NZXT Kraken X and Z series AIO CPU coolers * Additional chip support in existing drivers - Ayaneo Air Plus 7320u (oxp-sensors) - INA260 (ina2xx) - XPS 9315 (dell-smm) - MSI customer ID (nct6683) * Devicetree bindings updates - Common schema for hardware monitoring devices - Common schema for fans - Update chip descriptions to use common schema - Document regulator properties in several drivers - Explicit bindings for infineon buck converters * Other improvements - Replaced rbtree with maple tree register cache in several drivers - Added support for humidity min/max alarm and volatage fault attributes to hwmon core - Dropped non-functional I2C_CLASS_HWMON support for drivers w/o detect() - Dropped obsolete and redundant entried from MAINTAINERS - Cleaned up axi-fan-control and coretemp drivers - Minor fixes and improvements in several other drivers -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEEiHPvMQj9QTOCiqgVyx8mb86fmYEFAmXvI8QACgkQyx8mb86f mYFWTQ/9Hz4QfgIueAEhWGy0XORt7nSCeexkWIR341iyRk4LQA0UjDQg3+Ub5Hi1 7IBGDNi124S1I/W8fJl1KFgXjbirhuzpHq4DF60Ty+egTZ9IZpu3uySR4mubixYm J3el7SIJBvs3SgMFdS/HCtJqeU5HLk+1NjfWDmnq0Z27GHzEy/Nglj2TTO1CjMz/ tZ/LOWkdG5tMbwI8SZ/mBNMXMpYp/jnUZbrMxgZ/y+07R3jP7i1GWRjq5ZGuWaP6 SQEs4vfss/y6WUSZZenIIigRIAiAnsNIrjUjrMKPdf0EkjB+0ljn/jLXpAsUU6fL 07Uy+AwQb89PPWIKHdldn7/MYaR3zU+LwKwPbjULuvpo6Cj87WcIP/x7QqL//Ise Ix2Buy/oWoVHKG7Gtf+mF+Ott5MeFgj6pVsCN4IAYYdyai0GPM3RpFAcrIXFCjsE i3M5aRC46Yy8Ba6ov3Jmlh83kc9LauJrlCxIxIXTlUJIZiW7a5w083QDSaw3qQdB hukwfC8wOzpEsQngkBQyRSpF468lASzc4lp++tPLS/W0zxBrgrnHvgXTHnN8IxvQ ocuD5tVMg9gE2xT88t8BHTcw2uv03U5RoXY+nucbxA+Y/aT2t+jZhX9cPbq4+Rhe v7XDGMxcBYgtfwx6JT97DKqW9qLc01k8wxonCOrUop6B/+MdRbw= =BTB3 -----END PGP SIGNATURE----- Merge tag 'hwmon-for-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon updates from Guenter Roeck: "New drivers: - Amphenol ChipCap 2 - ASPEED g6 PWM/Fan tach - Astera Labs PT5161L retimer - ASUS ROG RYUJIN II 360 AIO cooler - LTC4282 - Microsoft Surface devices - MPS MPQ8785 Synchronous Step-Down Converter - NZXT Kraken X and Z series AIO CPU coolers Additional chip support in existing drivers: - Ayaneo Air Plus 7320u (oxp-sensors) - INA260 (ina2xx) - XPS 9315 (dell-smm) - MSI customer ID (nct6683) Devicetree bindings updates: - Common schema for hardware monitoring devices - Common schema for fans - Update chip descriptions to use common schema - Document regulator properties in several drivers - Explicit bindings for infineon buck converters Other improvements: - Replaced rbtree with maple tree register cache in several drivers - Added support for humidity min/max alarm and volatage fault attributes to hwmon core - Dropped non-functional I2C_CLASS_HWMON support for drivers w/o detect() - Dropped obsolete and redundant entried from MAINTAINERS - Cleaned up axi-fan-control and coretemp drivers - Minor fixes and improvements in several other drivers" * tag 'hwmon-for-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (70 commits) hwmon: (dell-smm) Add XPS 9315 to fan control whitelist hwmon: (aspeed-g6-pwm-tacho): Support for ASPEED g6 PWM/Fan tach dt-bindings: hwmon: Support Aspeed g6 PWM TACH Control dt-bindings: hwmon: fan: Add fan binding to schema dt-bindings: hwmon: tda38640: Add interrupt & regulator properties hwmon: (amc6821) add of_match table dt-bindings: hwmon: lm75: use common hwmon schema hwmon: (sis5595) drop unused DIV_TO_REG function dt-bindings: hwmon: reference common hwmon schema dt-bindings: hwmon: lltc,ltc4286: use common hwmon schema dt-bindings: hwmon: adi,adm1275: use common hwmon schema dt-bindings: hwmon: ti,ina2xx: use common hwmon schema dt-bindings: hwmon: add common properties hwmon: (pmbus/ir38064) Use PMBUS_REGULATOR_ONE to declare regulator hwmon: (pmbus/lm25066) Use PMBUS_REGULATOR_ONE to declare regulator hwmon: (pmbus/tda38640) Use PMBUS_REGULATOR_ONE to declare regulator regulator: dt-bindings: promote infineon buck converters to their own binding dt-bindings: hwmon/pmbus: ti,lm25066: document regulators dt-bindings: hwmon: nuvoton,nct6775: Add compatible value for NCT6799 MAINTAINERS: Drop redundant hwmon entries ... |
||
Linus Torvalds
|
69afef4af4 |
gpio updates for v6.9
Serialization rework: - use SRCU to serialize access to the global GPIO device list, to GPIO device structs themselves and to GPIO descriptors - make the GPIO subsystem resilient to the GPIO providers being unbound while the API calls are in progress - don't dereference the SRCU-protected chip pointer if the information we need can be obtained from the GPIO device structure - move some of the information contained in struct gpio_chip to struct gpio_device to further reduce the need to dereference the former - pass the GPIO device struct instead of the GPIO chip to sysfs callback to, again, reduce the need for accessing the latter - get GPIO descriptors from the GPIO device, not from the chip for the same reason - allow for mostly lockless operation of the GPIO driver API: assure consistency with SRCU and atomic operations - remove the global GPIO spinlock - remove the character device RW semaphore Core GPIOLIB: - constify pointers in GPIO API where applicable - unify the GPIO counting APIs for ACPI and OF - provide a macro for iterating over all GPIOs, not only the ones that are requested - remove leftover typedefs - pass the consumer device to GPIO core in devm_fwnode_gpiod_get_index() for improved logging - constify the GPIO bus type - don't warn about removing GPIO chips with descriptors still held by users as we can now handle this situation gracefully - remove unused logging helpers - unexport functions that are only used internally in the GPIO subsystem - set the device type (assign the relevant struct device_type) for GPIO devices New drivers: - add the ChromeOS EC GPIO driver Driver improvements: - allow building gpio-vf610 with COMPILE_TEST as well as disabling it in menuconfig (before it was always built for i.MX cofigs) - count the number of EICs using the device properties instead of hard-coding it in gpio-eic-sprd - improve the device naming, extend the debugfs output and add lockdep asserts to gpio-sim DT bindings: - document the 'label' property for gpio-pca9570 - convert aspeed,ast2400-gpio bindings to DT schema - disallow unevaluated properties for gpio-mvebu - document a new model in renesas,rcar-gpio Documentation: - improve the character device kerneldocs in user-space headers - add proper documentation for the character device uAPI (both v1 and v2) - move the sysfs and gpio-mockup docs into the "obsolete" section - improve naming consistency for GPIO terms - clarify the line values description for sysfs - minor docs improvements - improve the driver API contract for setting GPIO direction - mark unsafe APIs as deprecated in kerneldocs and suggest replacements Other: - remove an obsolete test from selftests -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEFp3rbAvDxGAT0sefEacuoBRx13IFAmXu1ecACgkQEacuoBRx 13JR7w//R3TswZ1uC9qkRjat9eA2KZUaI2QChlS7V/yXVcDHynuTlO/ZQmnnMdYL ch7T2cjPcW0OCt0UhcjamUmYtWaxe1e5GU3E42EosWUsojEzgGs0iNKe0R4SHYzv whlkFqO8+8IctYhiMpAU1PzP9N4YBqypwgCrTqHIrYuhz3MbPQxtCMkr7g0LTo8u Z3K0D3Y0LuwISWNYYhA20Bwemn1fEHXJ9f3pTeNaGh2dGZek9k9xd0zWcCxwhaYD CBTBiZXf57TUTJ2u+JG+au1ghEmmvBPlMpza+fazypbcvsiQxdGvv5QH1bTwyt4B woGq+biLLvlwfJ8BT7+09uni7gUyNL3wWkixlx/8Slkyti4xWqgZQ3WnhwN8yS4Y DbkTtzH/PIsjr1dZw6rnGoXi80lBEaok7LeI0QhybopTXQI+CnIbE/RBhzly8Mf8 1cAVFjrF2gPuaTuheakRBw4LOhegf4a485fadJVEUeEpeF7/p9rDQWAbgohYUnCE gHPwkTOJuOZp+BlsTOyspnqxWnDVMtCnmi+q1o7JvEgXqAtzU7+1gz/wDpfsHgHQ oze6V2JvD2R3JkHmdqcIzq5yNwk1rOguOY3saNiwSk95JY+A8vhAe/gVykklKDXX oX/DPwlVd/0OR+0HCQ3r0pXK8BSRQ9qm/nUZNnLB+Rts9K1peIU= =LX+L -----END PGP SIGNATURE----- Merge tag 'gpio-updates-for-v6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux Pull gpio updates from Bartosz Golaszewski: "The biggest feature is the locking overhaul. Up until now the synchronization in the GPIO subsystem was broken. There was a single spinlock "protecting" multiple data structures but doing it wrong (as evidenced by several places where it would be released when a sleeping function was called and then reacquired without checking the protected state). We tried to use an RW semaphore before but the main issue with GPIO is that we have drivers implementing the interfaces in both sleeping and non-sleeping ways as well as user-facing interfaces that can be called both from process as well as atomic contexts. Both ends converge in the same code paths that can use neither spinlocks nor mutexes. The only reasonable way out is to use SRCU and go mostly lockless. To that end: we add several SRCU structs in relevant places and use them to assure consistency between API calls together with atomic reads and writes of GPIO descriptor flags where it makes sense. This code has spent several weeks in next and has received several fixes in the first week or two after which it stabilized nicely. The GPIO subsystem is now resilient to providers being suddenly unbound. We managed to also remove the existing character device RW semaphore and the obsolete global spinlock. Other than the locking rework we have one new driver (for Chromebook EC), much appreciated documentation improvements from Kent and the regular driver improvements, DT-bindings updates and GPIOLIB core tweaks. Serialization rework: - use SRCU to serialize access to the global GPIO device list, to GPIO device structs themselves and to GPIO descriptors - make the GPIO subsystem resilient to the GPIO providers being unbound while the API calls are in progress - don't dereference the SRCU-protected chip pointer if the information we need can be obtained from the GPIO device structure - move some of the information contained in struct gpio_chip to struct gpio_device to further reduce the need to dereference the former - pass the GPIO device struct instead of the GPIO chip to sysfs callback to, again, reduce the need for accessing the latter - get GPIO descriptors from the GPIO device, not from the chip for the same reason - allow for mostly lockless operation of the GPIO driver API: assure consistency with SRCU and atomic operations - remove the global GPIO spinlock - remove the character device RW semaphore Core GPIOLIB: - constify pointers in GPIO API where applicable - unify the GPIO counting APIs for ACPI and OF - provide a macro for iterating over all GPIOs, not only the ones that are requested - remove leftover typedefs - pass the consumer device to GPIO core in devm_fwnode_gpiod_get_index() for improved logging - constify the GPIO bus type - don't warn about removing GPIO chips with descriptors still held by users as we can now handle this situation gracefully - remove unused logging helpers - unexport functions that are only used internally in the GPIO subsystem - set the device type (assign the relevant struct device_type) for GPIO devices New drivers: - add the ChromeOS EC GPIO driver Driver improvements: - allow building gpio-vf610 with COMPILE_TEST as well as disabling it in menuconfig (before it was always built for i.MX cofigs) - count the number of EICs using the device properties instead of hard-coding it in gpio-eic-sprd - improve the device naming, extend the debugfs output and add lockdep asserts to gpio-sim DT bindings: - document the 'label' property for gpio-pca9570 - convert aspeed,ast2400-gpio bindings to DT schema - disallow unevaluated properties for gpio-mvebu - document a new model in renesas,rcar-gpio Documentation: - improve the character device kerneldocs in user-space headers - add proper documentation for the character device uAPI (both v1 and v2) - move the sysfs and gpio-mockup docs into the "obsolete" section - improve naming consistency for GPIO terms - clarify the line values description for sysfs - minor docs improvements - improve the driver API contract for setting GPIO direction - mark unsafe APIs as deprecated in kerneldocs and suggest replacements Other: - remove an obsolete test from selftests" * tag 'gpio-updates-for-v6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (79 commits) gpio: sysfs: repair export returning -EPERM on 1st attempt selftest: gpio: remove obsolete gpio-mockup test gpiolib: Deduplicate cleanup for-loop in gpiochip_add_data_with_key() dt-bindings: gpio: aspeed,ast2400-gpio: Convert to DT schema gpio: acpi: Make acpi_gpio_count() take firmware node as a parameter gpio: of: Make of_gpio_get_count() take firmware node as a parameter gpiolib: Pass consumer device through to core in devm_fwnode_gpiod_get_index() gpio: sim: use for_each_hwgpio() gpio: provide for_each_hwgpio() gpio: don't warn about removing GPIO chips with active users anymore gpio: sim: delimit the fwnode name with a ":" when generating labels gpio: sim: add lockdep asserts gpio: Add ChromeOS EC GPIO driver gpio: constify of_phandle_args in of_find_gpio_device_by_xlate() gpio: fix memory leak in gpiod_request_commit() gpio: constify opaque pointer "data" in gpio_device_find() gpio: cdev: fix a NULL-pointer dereference with DEBUG enabled gpio: uapi: clarify default_values being logical gpio: sysfs: fix inverted pointer logic gpio: don't let lockdep complain about inherently dangerous RCU usage ... |
||
Linus Torvalds
|
6cdebf62a1 |
spi: Updates for v6.9
This release sees some exciting changes from David Lechner which implements some optimisations that have been talked about for a long time which allows client drivers to pre-prepare SPI messages for repeated or low latency use. This lets us move work out of latency sensitive paths and avoid repeating work for frequently performed operations. As well as being useful in itself this will also be used in future to allow controllers to directly trigger SPI operations (eg, from interrupts). Otherwise this release has mostly been focused on cleanups, plus a couple of new devices: - Support for pre-optimising messages. - A big set of updates from Uwe Kleine-König moving drivers to use APIs with more modern terminology for controllers. - Major overhaul of the s3c64xx driver. - Support for Google GS101 and Samsung Exynos850. -----BEGIN PGP SIGNATURE----- iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmXvHx0ACgkQJNaLcl1U h9ATVQf/WafEp7ddJ23bRaHZx/gBCMgv8N6mN7OBnzB2pMIGL56SPf9fGAmCUQKt mne6fDg6/RpydG/72TFppUjRFLN9CwoJjJfQIXMgOqYuPaMEnrj1wbcXar3MeeX2 8hS1u7wKwhOuuwLmoqqMOTKyGUj2mHsBOTOo0vm4WM1s9IHhY5TG2clYv1A+KZbj kSHE5m7YnBLwimwu0+hsXnRNHZUGKVksQ/9t7AD7/7L8aPj9jPqu1EjTS1/6IDB0 QDVyW7Z6hX7YoUx48gp+j/UFJ7ZyxTajy+0wvzPHou3KJARgFfNZWT2XvvYcpA0/ yqcpbCUwZ1AETXHcmly7YwNpPV9LBg== =+Xw/ -----END PGP SIGNATURE----- Merge tag 'spi-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi updates from Mark Brown: "This release sees some exciting changes from David Lechner which implements some optimisations that have been talked about for a long time which allows client drivers to pre-prepare SPI messages for repeated or low latency use. This lets us move work out of latency sensitive paths and avoid repeating work for frequently performed operations. As well as being useful in itself this will also be used in future to allow controllers to directly trigger SPI operations (eg, from interrupts). Otherwise this release has mostly been focused on cleanups, plus a couple of new devices: - Support for pre-optimising messages - A big set of updates from Uwe Kleine-König moving drivers to use APIs with more modern terminology for controllers - Major overhaul of the s3c64xx driver - Support for Google GS101 and Samsung Exynos850" * tag 'spi-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (122 commits) spi: Introduce SPI_INVALID_CS and is_valid_cs() spi: Fix types of the last chip select storage variables spi: Consistently use BIT for cs_index_mask spi: Exctract spi_dev_check_cs() helper spi: Exctract spi_set_all_cs_unused() helper spi: s3c64xx: switch exynos850 to new port config data spi: s3c64xx: switch gs101 to new port config data spi: s3c64xx: deprecate fifo_lvl_mask, rx_lvl_offset and port_id spi: s3c64xx: get rid of the OF alias ID dependency spi: s3c64xx: introduce s3c64xx_spi_set_port_id() spi: s3c64xx: let the SPI core determine the bus number spi: s3c64xx: allow FIFO depth to be determined from the compatible spi: s3c64xx: retrieve the FIFO depth from the device tree spi: s3c64xx: determine the fifo depth only once spi: s3c64xx: allow full FIFO masks spi: s3c64xx: define a magic value spi: dt-bindings: introduce FIFO depth properties spi: axi-spi-engine: use struct_size() macro spi: axi-spi-engine: use __counted_by() attribute spi: axi-spi-engine: remove p from struct spi_engine_message_state ... |
||
Linus Torvalds
|
21ac5a9651 |
regulator: Updates for v6.9
This has been a very quiet release, mostly cleanups, API updates and simple device additions. I messed up slightly and there are a couple of duplicated commits resulting from me leaving things in my inbox which didn't seem worth removing by the time I noticed them. - Conversion of several drivers to GPIO descriptors. - Build out the features of of the MP8859 driver. - Support for Qualcomm PM4125 and PM6150. -----BEGIN PGP SIGNATURE----- iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmXvFPUACgkQJNaLcl1U h9C11wf+LkEBZ/oaidhjWlDdnd6oVHCVG7du5YXRSDcobm9dqigfnhRPvcF3WqlQ DfPBq5/VN/yCAxD3tsUS+bhPfCEMfSnEHN4uaYy7NjLulW3zh++Dxib3FPD7HURY aw5u8gm4AuB+x4nJOtrA6tiBisfHyCM7uSIfnUcs0LVlksCibdOe0OfHVsO2BNW+ gbLxZc8gr5VdORfHqb6oeUtcoiA/2gALNvdagMooguzolDtVEs1yLQkbD4CCOGHg EPqE7YxdJrTOtbd7hiR5z2G8plPqmsbCG//Jb9jJuEAtefm57pyJ5SfMBGKs0hS9 p/o5Vk4ygghArRnl0KsItgphFCZt0A== =GuVG -----END PGP SIGNATURE----- Merge tag 'regulator-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator Pull regulator updates from Mark Brown: "This has been a very quiet release, mostly cleanups, API updates and simple device additions. I messed up slightly and there are a couple of duplicated commits resulting from me leaving things in my inbox which didn't seem worth removing by the time I noticed them. - Conversion of several drivers to GPIO descriptors - Build out the features of of the MP8859 driver - Support for Qualcomm PM4125 and PM6150" * tag 'regulator-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (31 commits) regulator: lp8788-buck: fix copy and paste bug in lp8788_dvs_gpio_request() regulator: core: make regulator_class constant regulator: da9121: Remove unused of_gpio.h regulator: userspace-consumer: add module device table regulator: dt-bindings: gpio-regulator: Fix "gpios-states" and "states" array bounds regulator: mp8859: Implement set_current_limit() regulator: mp8859: Report slew rate regulator: mp8859: Support status and error readback regulator: mp8859: Support active discharge control regulator: mp8859: Support mode operations regulator: mp8859: Support enable control regulator: mp8859: Validate and log device identifier information regulator: mp8859: Specify register accessibility and enable caching regulator: max8998: Convert to GPIO descriptors regulator: max8997: Convert to GPIO descriptors regulator: lp8788-buck: Fully convert to GPIO descriptors regulator: da9055: Fully convert to GPIO descriptors regulator: max8973: Finalize switch to GPIO descriptors regulator: dt-bindings: qcom,usb-vbus-regulator: add support for PM4125 regulator: dt-bindings: qcom,usb-vbus-regulator: add support for PM4125 ... |
||
Linus Torvalds
|
245b6f3239 |
MMC core:
- Drop the use of BLK_BOUNCE_HIGH - Fix partition switch for GP3 - Remove usage of the deprecated ida_simple API MMC host: - cqhci: Update bouncing email-addresses in MAINTAINERS - davinci_mmc: Use sg_miter for PIO - dw_mmc-hi3798cv200: Convert the DT bindings to YAML - dw_mmc-hi3798mv200: Add driver for the new dw_mmc variant - fsl-imx-esdhc: A couple of corrections/updates to the DT bindings - meson-mx-sdhc: Drop use of the ->card_hw_reset() callback - moxart-mmc: Use sg_miter for PIO - moxart-mmc: Fix accounting for DMA transfers - mvsdio: Use sg_miter for PIO - mxcmmc: Use sg_miter for PIO - omap: Use sg_miter for PIO - renesas,sdhi: Add support for R-Car V4M variant - sdhci-esdhc-mcf: Use sg_miter for swapping - sdhci-of-dwcmshc: Add support for Sophgo CV1800B and SG2002 variants - sh_mmcif: Use sg_miter for PIO - tmio: Avoid concurrent runs of mmc_request_done() -----BEGIN PGP SIGNATURE----- iQJLBAABCgA1FiEEugLDXPmKSktSkQsV/iaEJXNYjCkFAmXu/nkXHHVsZi5oYW5z c29uQGxpbmFyby5vcmcACgkQ/iaEJXNYjCnffw/+L4sj1IzK8vwK24/vQyk2W4Aw V4Q6i3rmfxoWRIECsZNdfhBZxvRsDEhb5OZ/piFBrm1RtKdTqxnOp64mu8DayO2E Fa9HyKoKRSY20WMr2YAuUp+Kx4gY33SqJCdq/SjqI/dY3QMWvj5uET8Z6GM+zago YmD5d3ku4Te7r3ChJABxshbuMyaES4vOSHkW7jcEDEyOacXgBAGHjs8MkWVsNQsD NMsD3CzF3VXaJhVW9r3eZMDEbhJoDFLuwplYVs2t8SyxjitHI7eBA91OtrG9TMkC W7mvf4pXAYj6mU2wxuMKquqIEnLPjcXdqvym4kkqG7+D89nIe5w2iDcGMH33COi8 uW/PJ4t/slkMQL9InPkjLS3m1O5X9Y+doJTF/12HAk9oEI8s9JXNbpNxZYiGVLI0 EAG1bB+h6pW9wlyMWA2u6SIhe5TXStSAGrzDKBrWYt5IdKE4Qrn28tzWxpH2olks r8XzQcNMqB7KWhvmO9hSr/F13Qs5472nzsF7lNMQAGp4G3qrehAtd4DJt3xl6KE7 A2G4nVh/gGBbBu4AWaMvw7l+Gdiqov9qvO1KGUZPJiH3zkjLwdz0u4PT3Fwha34P NEaro18+/yovw5Tawgnc5TEsIwbGDT3ymkpIEqMAdcNTY8XIBp+ccd+65t2LSa2S gP73V+Em1XGBKfvTI0k= =ME/e -----END PGP SIGNATURE----- Merge tag 'mmc-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc Pull MMC updates from Ulf Hansson: "MMC core: - Drop the use of BLK_BOUNCE_HIGH - Fix partition switch for GP3 - Remove usage of the deprecated ida_simple API MMC host: - cqhci: Update bouncing email-addresses in MAINTAINERS - davinci_mmc: Use sg_miter for PIO - dw_mmc-hi3798cv200: Convert the DT bindings to YAML - dw_mmc-hi3798mv200: Add driver for the new dw_mmc variant - fsl-imx-esdhc: A couple of corrections/updates to the DT bindings - meson-mx-sdhc: Drop use of the ->card_hw_reset() callback - moxart-mmc: Use sg_miter for PIO - moxart-mmc: Fix accounting for DMA transfers - mvsdio: Use sg_miter for PIO - mxcmmc: Use sg_miter for PIO - omap: Use sg_miter for PIO - renesas,sdhi: Add support for R-Car V4M variant - sdhci-esdhc-mcf: Use sg_miter for swapping - sdhci-of-dwcmshc: Add support for Sophgo CV1800B and SG2002 variants - sh_mmcif: Use sg_miter for PIO - tmio: Avoid concurrent runs of mmc_request_done()" * tag 'mmc-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (44 commits) mmc: core: make mmc_host_class constant mmc: core: Fix switch on gp3 partition mmc: tmio: comment the ERR_PTR usage in this driver mmc: mmc_spi: Don't mention DMA direction mmc: dw_mmc: Remove unused of_gpio.h mmc: dw_mmc: add support for hi3798mv200 dt-bindings: mmc: hisilicon,hi3798cv200-dw-mshc: add Hi3798MV200 binding dt-bindings: mmc: dw-mshc-hi3798cv200: convert to YAML mmc: dw_mmc-hi3798cv200: remove MODULE_ALIAS() mmc: core: Use a struct device* as in-param to mmc_of_parse_clk_phase() mmc: wmt-sdmmc: remove an incorrect release_mem_region() call in the .remove function mmc: tmio: avoid concurrent runs of mmc_request_done() dt-bindings: mmc: fsl-imx-mmc: Document the required clocks mmc: sh_mmcif: Advance sg_miter before reading blocks mmc: sh_mmcif: sg_miter must not be atomic mmc: sdhci-esdhc-mcf: Flag the sg_miter as atomic dt-bindings: mmc: fsl-imx-esdhc: add default and 100mhz state mmc: core: constify the struct device_type usage mmc: sdhci-of-dwcmshc: Add support for Sophgo CV1800B and SG2002 dt-bindings: mmc: sdhci-of-dwcmhsc: Add Sophgo CV1800B and SG2002 support ... |