mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git
synced 2025-01-17 22:05:08 +00:00
2586 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Laurent Pinchart
|
4db7f7a0e5 |
media: i2c: Drop unused vs6624 camera sensor driver
The vs6624 camera sensor driver doesn't support DT and relies on platform data. The last board files supplying platform data for that device have been removed from the kernel in v4.17. The driver hasn't been used since them. Drop it. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org> |
||
|
Laurent Pinchart
|
6a692b059c |
media: i2c: Drop unused sr030pc30 camera sensor driver
The sr030pc30 camera sensor driver doesn't support DT and relies on platform data. No board file has ever provided platform data for that device. The driver has thus never been used in the mainline kernel since its introduction in v2.6.37. Drop it. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org> |
||
|
Laurent Pinchart
|
56ac4aa4ed |
media: i2c: Drop unused s5k6aa camera sensor driver
The s5k6aa camera sensor driver doesn't support DT and relies on platform data. The last board files supplying platform data for that device have been removed from the kernel in v3.11. The driver hasn't been used since them. Drop it. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org> |
||
|
Laurent Pinchart
|
4604236d67 |
media: i2c: Drop unused noon010pc30 camera sensor driver
The noon010pc30 camera sensor driver doesn't support DT and relies on platform data. The last board files supplying platform data for that device have been removed from the kernel in v3.16. A device tree file referencing the device has been added in v3.17, but without corresponding DT bindings, and with DT support in the driver. The driver thus hasn't been used since v316. Drop it. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org> |
||
|
Laurent Pinchart
|
95a9ea8a13 |
media: i2c: Drop unused mt9t001 camera sensor driver
The mt9t001 camera sensor driver doesn't support DT and relies on platform data. No board file has ever provided platform data for that device. The driver has thus never been used in the mainline kernel since its introduction in v3.2. Drop it. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org> |
||
|
Laurent Pinchart
|
a22eabc825 |
media: i2c: Drop unused mt9m032 camera sensor driver
The mt9m032 camera sensor driver doesn't support DT and relies on platform data. No board file has ever provided platform data for that device. The driver has thus never been used in the mainline kernel since its introduction in v3.4. Drop it. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org> |
||
|
Laurent Pinchart
|
c77d3da12e |
media: i2c: Drop unused m5mols camera sensor driver
The m5mols camera sensor driver doesn't support DT and relies on platform data. The last board files supplying platform data for that device have been removed from the kernel in v3.11. The driver hasn't been used since them. Drop it. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org> |
||
|
Laurent Pinchart
|
db24aa0411 |
media: i2c: Drop unused ad9389b video encoder driver
The ad9389b video encoder driver doesn't support DT and relies on platform data. No board file has ever provided platform data for that device. The driver has thus never been used in the mainline kernel since its introduction in v3.7. Drop it. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org> |
||
|
Hans Verkuil
|
8eb2a208fa |
media: Documentation: admin-guide: cec.rst: document NTP issue
The CEC pin framework is affected by NTP daemons speeding up or slowing down the system clock. Document this and explain how to fix this for chronyd. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org> |
||
|
Kamalesh Babulal
|
9403d9cb56 |
docs: cgroup-v1/cpusets: update libcgroup project link
Update the libcgroup project link, in the cgroup v1/cpusets documentation. Signed-off-by: Kamalesh Babulal <kamalesh.babulal@oracle.com> Signed-off-by: Tejun Heo <tj@kernel.org> |
||
|
Rafael J. Wysocki
|
684952212c | Merge back cpufreq changes for 6.4-rc1. | ||
|
Darrick J. Wong
|
7ba83850ca |
xfs: deprecate the ascii-ci feature
This feature is a mess -- the hash function has been broken for the entire 15 years of its existence if you create names with extended ascii bytes; metadump name obfuscation has silently failed for just as long; and the feature clashes horribly with the UTF8 encodings that most systems use today. There is exactly one fstest for this feature. In other words, this feature is crap. Let's deprecate it now so we can remove it from the codebase in 2030. Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> |
||
|
Jonathan Corbet
|
790a6c21c1 |
docs: move m68k architecture documentation under Documentation/arch/
Architecture-specific documentation is being moved into Documentation/arch/ as a way of cleaning up the top-level documentation directory and making the docs hierarchy more closely match the source hierarchy. Move Documentation/m68k into arch/ and fix all in-tree references. Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Jonathan Corbet <corbet@lwn.net> |
||
|
Greg Kroah-Hartman
|
039535ecf1 |
Merge 6.3-rc6 into tty-next
We need the tty/serial fixes in here for testing. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Ojaswin Mujoo
|
361eb69fc9 |
ext4: Remove the logic to trim inode PAs
Earlier, inode PAs were stored in a linked list. This caused a need to periodically trim the list down inorder to avoid growing it to a very large size, as this would severly affect performance during list iteration. Recent patches changed this list to an rbtree, and since the tree scales up much better, we no longer need to have the trim functionality, hence remove it. Signed-off-by: Ojaswin Mujoo <ojaswin@linux.ibm.com> Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/c409addceaa3ade4b40328e28e3b54b2f259689e.1679731817.git.ojaswin@linux.ibm.com Signed-off-by: Theodore Ts'o <tytso@mit.edu> |
||
|
Axel Rasmussen
|
0289184476 |
mm: userfaultfd: add UFFDIO_CONTINUE_MODE_WP to install WP PTEs
UFFDIO_COPY already has UFFDIO_COPY_MODE_WP, so when installing a new PTE
to resolve a missing fault, one can install a write-protected one. This
is useful when using UFFDIO_REGISTER_MODE_{MISSING,WP} in combination.
This was motivated by testing HugeTLB HGM [1], and in particular its
interaction with userfaultfd features. Existing userfaultfd code supports
using WP and MINOR modes together (i.e. you can register an area with
both enabled), but without this CONTINUE flag the combination is in
practice unusable.
So, add an analogous UFFDIO_CONTINUE_MODE_WP, which does the same thing as
UFFDIO_COPY_MODE_WP, but for *minor* faults.
Update the selftest to do some very basic exercising of the new flag.
Update Documentation/ to describe how these flags are used (neither the
COPY nor the new CONTINUE versions of this mode flag were described there
before).
[1]: https://patchwork.kernel.org/project/linux-mm/cover/20230218002819.1486479-1-jthoughton@google.com/
Link: https://lkml.kernel.org/r/20230314221250.682452-5-axelrasmussen@google.com
Signed-off-by: Axel Rasmussen <axelrasmussen@google.com>
Acked-by: Peter Xu <peterx@redhat.com>
Acked-by: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nadav Amit <namit@vmware.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
||
|
Kirill A. Shutemov
|
23baf831a3 |
mm, treewide: redefine MAX_ORDER sanely
MAX_ORDER currently defined as number of orders page allocator supports: user can ask buddy allocator for page order between 0 and MAX_ORDER-1. This definition is counter-intuitive and lead to number of bugs all over the kernel. Change the definition of MAX_ORDER to be inclusive: the range of orders user can ask from buddy allocator is 0..MAX_ORDER now. [kirill@shutemov.name: fix min() warning] Link: https://lkml.kernel.org/r/20230315153800.32wib3n5rickolvh@box [akpm@linux-foundation.org: fix another min_t warning] [kirill@shutemov.name: fixups per Zi Yan] Link: https://lkml.kernel.org/r/20230316232144.b7ic4cif4kjiabws@box.shutemov.name [akpm@linux-foundation.org: fix underlining in docs] Link: https://lore.kernel.org/oe-kbuild-all/202303191025.VRCTk6mP-lkp@intel.com/ Link: https://lkml.kernel.org/r/20230315113133.11326-11-kirill.shutemov@linux.intel.com Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Reviewed-by: Michael Ellerman <mpe@ellerman.id.au> [powerpc] Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Cc: Zi Yan <ziy@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Peter Xu
|
2bad466cc9 |
mm/uffd: UFFD_FEATURE_WP_UNPOPULATED
Patch series "mm/uffd: Add feature bit UFFD_FEATURE_WP_UNPOPULATED", v4.
The new feature bit makes anonymous memory acts the same as file memory on
userfaultfd-wp in that it'll also wr-protect none ptes.
It can be useful in two cases:
(1) Uffd-wp app that needs to wr-protect none ptes like QEMU snapshot,
so pre-fault can be replaced by enabling this flag and speed up
protections
(2) It helps to implement async uffd-wp mode that Muhammad is working on [1]
It's debatable whether this is the most ideal solution because with the
new feature bit set, wr-protect none pte needs to pre-populate the
pgtables to the last level (PAGE_SIZE). But it seems fine so far to
service either purpose above, so we can leave optimizations for later.
The series brings pte markers to anonymous memory too. There's some
change in the common mm code path in the 1st patch, great to have some eye
looking at it, but hopefully they're still relatively straightforward.
This patch (of 2):
This is a new feature that controls how uffd-wp handles none ptes. When
it's set, the kernel will handle anonymous memory the same way as file
memory, by allowing the user to wr-protect unpopulated ptes.
File memories handles none ptes consistently by allowing wr-protecting of
none ptes because of the unawareness of page cache being exist or not.
For anonymous it was not as persistent because we used to assume that we
don't need protections on none ptes or known zero pages.
One use case of such a feature bit was VM live snapshot, where if without
wr-protecting empty ptes the snapshot can contain random rubbish in the
holes of the anonymous memory, which can cause misbehave of the guest when
the guest OS assumes the pages should be all zeros.
QEMU worked it around by pre-populate the section with reads to fill in
zero page entries before starting the whole snapshot process [1].
Recently there's another need raised on using userfaultfd wr-protect for
detecting dirty pages (to replace soft-dirty in some cases) [2]. In that
case if without being able to wr-protect none ptes by default, the dirty
info can get lost, since we cannot treat every none pte to be dirty (the
current design is identify a page dirty based on uffd-wp bit being
cleared).
In general, we want to be able to wr-protect empty ptes too even for
anonymous.
This patch implements UFFD_FEATURE_WP_UNPOPULATED so that it'll make
uffd-wp handling on none ptes being consistent no matter what the memory
type is underneath. It doesn't have any impact on file memories so far
because we already have pte markers taking care of that. So it only
affects anonymous.
The feature bit is by default off, so the old behavior will be maintained.
Sometimes it may be wanted because the wr-protect of none ptes will
contain overheads not only during UFFDIO_WRITEPROTECT (by applying pte
markers to anonymous), but also on creating the pgtables to store the pte
markers. So there's potentially less chance of using thp on the first
fault for a none pmd or larger than a pmd.
The major implementation part is teaching the whole kernel to understand
pte markers even for anonymously mapped ranges, meanwhile allowing the
UFFDIO_WRITEPROTECT ioctl to apply pte markers for anonymous too when the
new feature bit is set.
Note that even if the patch subject starts with mm/uffd, there're a few
small refactors to major mm path of handling anonymous page faults. But
they should be straightforward.
With WP_UNPOPUATED, application like QEMU can avoid pre-read faults all
the memory before wr-protect during taking a live snapshot. Quotting from
Muhammad's test result here [3] based on a simple program [4]:
(1) With huge page disabled
echo madvise > /sys/kernel/mm/transparent_hugepage/enabled
./uffd_wp_perf
Test DEFAULT: 4
Test PRE-READ: 1111453 (pre-fault 1101011)
Test MADVISE: 278276 (pre-fault 266378)
Test WP-UNPOPULATE: 11712
(2) With Huge page enabled
echo always > /sys/kernel/mm/transparent_hugepage/enabled
./uffd_wp_perf
Test DEFAULT: 4
Test PRE-READ: 22521 (pre-fault 22348)
Test MADVISE: 4909 (pre-fault 4743)
Test WP-UNPOPULATE: 14448
There'll be a great perf boost for no-thp case, while for thp enabled with
extreme case of all-thp-zero WP_UNPOPULATED can be slower than MADVISE,
but that's low possibility in reality, also the overhead was not reduced
but postponed until a follow up write on any huge zero thp, so potentially
it is faster by making the follow up writes slower.
[1] https://lore.kernel.org/all/20210401092226.102804-4-andrey.gruzdev@virtuozzo.com/
[2] https://lore.kernel.org/all/Y+v2HJ8+3i%2FKzDBu@x1n/
[3] https://lore.kernel.org/all/d0eb0a13-16dc-1ac1-653a-78b7273781e3@collabora.com/
[4] https://github.com/xzpeter/clibs/blob/master/uffd-test/uffd-wp-perf.c
[peterx@redhat.com: comment changes, oneliner fix to khugepaged]
Link: https://lkml.kernel.org/r/ZB2/8jPhD3fpx5U8@x1n
Link: https://lkml.kernel.org/r/20230309223711.823547-1-peterx@redhat.com
Link: https://lkml.kernel.org/r/20230309223711.823547-2-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: Nadav Amit <nadav.amit@gmail.com>
Cc: Paul Gofman <pgofman@codeweavers.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
||
|
Greg Kroah-Hartman
|
cd8fe5b6db |
Merge 6.3-rc5 into driver-core-next
We need the fixes in here for testing, as well as the driver core changes for documentation updates to build on. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Jonathan Corbet
|
ff61f0791c |
docs: move x86 documentation into Documentation/arch/
Move the x86 documentation under Documentation/arch/ as a way of cleaning up the top-level directory and making the structure of our docs more closely match the structure of the source directories it describes. All in-kernel references to the old paths have been updated. Acked-by: Dave Hansen <dave.hansen@linux.intel.com> Cc: linux-arch@vger.kernel.org Cc: x86@kernel.org Cc: Borislav Petkov <bp@alien8.de> Cc: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/lkml/20230315211523.108836-1-corbet@lwn.net/ Signed-off-by: Jonathan Corbet <corbet@lwn.net> |
||
|
Bagas Sanjaya
|
f030c8fd64 |
Documentation: kernel-parameters: Remove meye entry
Commit ba47652ba65523 ("media: meye: remove this deprecated driver")
removes meye driver but forgets to purge its kernel-parameters.txt
entry, hence broken reference.
Remove the entry.
Link: https://lore.kernel.org/all/202302070341.OVqstpMM-lkp@intel.com/
Fixes: ba47652ba655 ("media: meye: remove this deprecated driver")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20230315100246.62324-1-bagasdotme@gmail.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
||
|
Vlastimil Babka
|
d88e2a2bd2 |
mm, pagemap: remove SLOB and SLQB from comments and documentation
SLOB has been removed and SLQB never merged, so remove their mentions from comments and documentation of pagemap. In stable_page_flags() also correct an outdated comment mentioning that PageBuddy() means a page->_refcount of -1, and remove compound_head() from the PageSlab() call, as that's already implicitly there thanks to PF_NO_TAIL. Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Lorenzo Stoakes <lstoakes@gmail.com> Acked-by: Mike Rapoport (IBM) <rppt@kernel.org> |
||
|
Paul E. McKenney
|
203e435844 |
kernel/smp: Make csdlock_debug= resettable
It is currently possible to set the csdlock_debug_enabled static branch, but not to reset it. This is an issue when several different entities supply kernel boot parameters and also for kernels built with CONFIG_CSD_LOCK_WAIT_DEBUG_DEFAULT=y. Therefore, make the csdlock_debug=0 kernel boot parameter turn off debugging. Last one wins! Reported-by: Jes Sorensen <Jes.Sorensen@gmail.com> Signed-off-by: Paul E. McKenney <paulmck@kernel.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Juergen Gross <jgross@suse.com> Link: https://lore.kernel.org/r/20230321005516.50558-4-paulmck@kernel.org |
||
|
Paul E. McKenney
|
1771257cb4 |
locking/csd_lock: Remove added data from CSD lock debugging
The diagnostics added by this commit were extremely useful in one instance:
a5aabace5fb8 ("locking/csd_lock: Add more data to CSD lock debugging")
However, they have not seen much action since, and there have been some
concerns expressed that the complexity is not worth the benefit.
Therefore, manually revert this commit, but leave a comment telling
people where to find these diagnostics.
[ paulmck: Apply Juergen Gross feedback. ]
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20230321005516.50558-2-paulmck@kernel.org
|
||
|
Paul E. McKenney
|
c521986016 |
locking/csd_lock: Add Kconfig option for csd_debug default
The csd_debug kernel parameter works well, but is inconvenient in cases where it is more closely associated with boot loaders or automation than with a particular kernel version or release. Thererfore, provide a new CSD_LOCK_WAIT_DEBUG_DEFAULT Kconfig option that defaults csd_debug to 1 when selected and 0 otherwise, with this latter being the default. Signed-off-by: Paul E. McKenney <paulmck@kernel.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Juergen Gross <jgross@suse.com> Link: https://lore.kernel.org/r/20230321005516.50558-1-paulmck@kernel.org |
||
|
Thorsten Leemhuis
|
efe920466f |
docs: describe how to quickly build a trimmed kernel
Add a text explaining how to quickly build a kernel, as that's something users will often have to do when they want to report an issue or test proposed fixes. This is a huge and frightening task for quite a few users these days, as many rely on pre-compiled kernels and have never built their own. They find help on quite a few websites explaining the process in various ways, but those howtos often omit important details or make things too hard for the 'quickly build just for testing' case that 'localmodconfig' is really useful for. Hence give users something at hand to guide them, as that makes it easier for them to help with testing, debugging, and fixing the kernel. To keep the complexity at bay, the document explicitly focuses on how to compile the kernel on commodity distributions running on commodity hardware. People that deal with less common distributions or hardware will often know their way around already anyway. The text describes a few oddities of Arch and Debian that were found by the author and a few volunteers that tested the described procedure. There are likely more such quirks that need to be covered as well as a few things the author will have missed -- but one has to start somewhere. The document heavily uses anchors and links to them, which makes things slightly harder to read in the source form. But the intended target audience is way more likely to read rendered versions of this text on pages like docs.kernel.org anyway -- and there those anchors and links allow easy jumps to the reference section and back, which makes the document a lot easier to work with for the intended target audience. Aspects relevant for bisection were left out on purpose, as that is a related, but in the end different use case. The rough plan is to have a second document with a similar style to cover bisection. The idea is to reuse a few bits from this document and link quite often to entries in the reference section with the help of the anchors in this text. Signed-off-by: Thorsten Leemhuis <linux@leemhuis.info> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/r/1a788a8e7ba8a2063df08668f565efa832016032.1678021408.git.linux@leemhuis.info Signed-off-by: Jonathan Corbet <corbet@lwn.net> |
||
|
Randy Dunlap
|
a894a8a56b |
Documentation: kernel-parameters: sort all "no..." parameters
Sort all of the "no..." kernel parameters into the correct order as specified in kernel-parameters.rst: "into English Dictionary order (defined as ignoring all punctuation and sorting digits before letters in a case insensitive manner)". No other changes here, just movement of lines. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Link: https://lore.kernel.org/r/20230317002635.16540-1-rdunlap@infradead.org Signed-off-by: Jonathan Corbet <corbet@lwn.net> |
||
|
Hans Verkuil
|
3e59c24006 |
media: admin-guide/media/cec.rst: update CEC debugging doc
The documentation on how to create your own Raspberry Pi CEC debugger was a bit out of date. Update it to the Raspberry Pi 4B, drop the mention of the RTC and a link to a picture that no longer works. Also reorganize the text to make it easier to follow and change the pins to match the pins I use. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org> |
||
|
Wyes Karny
|
7a9dec665f |
Documentation: cpufreq: amd-pstate: Update amd_pstate status sysfs for guided
Update amd_pstate status sysfs for guided mode. Acked-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name> Signed-off-by: Wyes Karny <wyes.karny@amd.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
Wyes Karny
|
2dd6d0ebf7 |
cpufreq: amd-pstate: Add guided autonomous mode
From ACPI spec below 3 modes for CPPC can be defined:
1. Non autonomous: OS scaling governor specifies operating frequency/
performance level through `Desired Performance` register and platform
follows that.
2. Guided autonomous: OS scaling governor specifies min and max
frequencies/ performance levels through `Minimum Performance` and
`Maximum Performance` register, and platform can autonomously select an
operating frequency in this range.
3. Fully autonomous: OS only hints (via EPP) to platform for the required
energy performance preference for the workload and platform autonomously
scales the frequency.
Currently (1) is supported by amd_pstate as passive mode, and (3) is
implemented by EPP support. This change is to support (2).
In guided autonomous mode the min_perf is based on the input from the
scaling governor. For example, in case of schedutil this value depends
on the current utilization. And max_perf is set to max capacity.
To activate guided auto mode ``amd_pstate=guided`` command line
parameter has to be passed in the kernel.
Acked-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Signed-off-by: Wyes Karny <wyes.karny@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
||
|
Wyes Karny
|
3e6e078057 |
Documentation: cpufreq: amd-pstate: Move amd_pstate param to alphabetical order
Move amd_pstate command line param description to correct alphabetical order. Acked-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name> Signed-off-by: Wyes Karny <wyes.karny@amd.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
Randy Dunlap
|
c500488f23 |
Documentation: kernel-parameters: sort NFS parameters
Sort the NFS kernel command line parameters. This is done in 4 groups so as to not have them intermingled: 'nfs' module parameters, 'nfs4' module parameters, 'nfsd' module parameters, and nfs "global" (__setup, no module) parameters. There were 5 parameters which were listed with a space between the parameter name and the following '=' sign. The space has been removed since module parameters expect 'parameter=' with no intervening space. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: linux-doc@vger.kernel.org Cc: Trond Myklebust <trond.myklebust@hammerspace.com> Cc: Anna Schumaker <anna@kernel.org> Cc: Chuck Lever <chuck.lever@oracle.com> Cc: Jeff Layton <jlayton@kernel.org> Cc: linux-nfs@vger.kernel.org Link: https://lore.kernel.org/r/20230227025816.1083-1-rdunlap@infradead.org Signed-off-by: Jonathan Corbet <corbet@lwn.net> |
||
|
Lukas Bulwahn
|
184cd8aa0c |
docs: admin: unicode: update information on state of lanana.org document
Replace link to a non-existing page with a note that lanana.org does not maintain Linux Zone Unicode Assignments anymore. Remove the reference to H. Peter Anvin and the unicode lanana.org email as the maintainer of this file, as at this point, this is all maintained by the general kernel community. Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Link: https://lore.kernel.org/r/20230307144000.29539-3-lukas.bulwahn@gmail.com Signed-off-by: Jonathan Corbet <corbet@lwn.net> |
||
|
Vegard Nossum
|
44ac5abac8 |
Documentation/security-bugs: move from admin-guide/ to process/
Jiri Kosina, Jonathan Corbet, and Willy Tarreau all expressed a desire to move this document under process/. Create a new section for security issues in the index and group it with embargoed-hardware-issues. I'm doing this at the start of the series to make all the subsequent changes show up in 'git blame'. Existing references were updated using: git grep -l security-bugs ':!Documentation/translations/' | xargs sed -i 's|admin-guide/security-bugs|process/security-bugs|g' git grep -l security-bugs Documentation/translations/ | xargs sed -i 's|Documentation/admin-guide/security-bugs|Documentation/process/security-bugs|g' git grep -l security-bugs Documentation/translations/ | xargs sed -i '/Original:/s|\.\./admin-guide/security-bugs|\.\./process/security-bugs|g' Notably, the page is not moved in the translations (due to my lack of knowledge of these languages), but the translations have been updated to point to the new location of the original document where these references exist. Link: https://lore.kernel.org/all/nycvar.YFH.7.76.2206062326230.10851@cbobk.fhfr.pm/ Suggested-by: Jiri Kosina <jikos@kernel.org> Cc: Alex Shi <alexs@kernel.org> Cc: Yanteng Si <siyanteng@loongson.cn> Cc: Hu Haowen <src.res@email.cn> Cc: Federico Vaga <federico.vaga@vaga.pv.it> Cc: Tsugikazu Shibata <tshibata@ab.jp.nec.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Jeimi Lee <jamee.lee@samsung.com> Cc: Carlos Bilbao <carlos.bilbao@amd.com> Cc: Akira Yokosawa <akiyks@gmail.com> Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com> Acked-by: Carlos Bilbao <carlos.bilbao@amd.com> Reviewed-by: Yanteng Si <siyanteng@loongson.cn> Reviewed-by: Akira Yokosawa <akiyks@gmail.com> Acked-by: Federico Vaga <federico.vaga@vaga.pv.it> Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com> Link: https://lore.kernel.org/r/20230305220010.20895-2-vegard.nossum@oracle.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Saravana Kannan
|
ffbe08a8e8 |
driver core: Add fw_devlink.sync_state command line param
When all devices that could probe have finished probing (based on deferred_probe_timeout configuration or late_initcall() when !CONFIG_MODULES), this parameter controls what to do with devices that haven't yet received their sync_state() calls. fw_devlink.sync_state=strict is the default and the driver core will continue waiting on all consumers of a device to probe successfully before sync_state() is called for the device. This is the default behavior since calling sync_state() on a device when all its consumers haven't probed could make some systems unusable/unstable. When this option is selected, we also print the list of devices that haven't had sync_state() called on them by the time all devices the could probe have finished probing. fw_devlink.sync_state=timeout will cause the driver core to give up waiting on consumers and call sync_state() on any devices that haven't yet received their sync_state() calls. This option is provided for systems that won't become unusable/unstable as they might be able to save power (depends on state of hardware before kernel starts) if all devices get their sync_state(). Signed-off-by: Saravana Kannan <saravanak@google.com> Link: https://lore.kernel.org/r/20230304005355.746421-2-saravanak@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Petr Mladek
|
571079f5ba |
Documentation/serial-console: Document the behavior when the last console= parameter is not used
The console= kernel command-line parameter defines where the kernel messages appear. It can be used multiple times to make the kernel log visible on more devices. The ordering of the console= parameters is important. In particular, the last one defines which device can be accessed also via /dev/console. The behavior is more complicated when the last console= parameter is ignored by kernel. It might be surprising because it was not intentional. The kernel just works this way historically. There were few attempts to change the behavior. Unfortunately, it can't be done because it would break existing users. Document the historical behavior at least. Link: https://lore.kernel.org/r/20170606143149.GB7604@pathway.suse.cz Link: https://lore.kernel.org/r/20230213113912.1237943-1-rkanwal@rivosinc.com Signed-off-by: Petr Mladek <pmladek@suse.com> Link: https://lore.kernel.org/r/20230308112433.24292-1-pmladek@suse.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Arnd Bergmann
|
d74e316633 |
gpiolib: remove legacy gpio_export()
There are only a handful of users of gpio_export() and related functions. As these are just wrappers around the modern gpiod_export() helper, remove the wrappers and open-code the gpio_to_desc in all callers to shrink the legacy API. Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> |
||
|
Greg Kroah-Hartman
|
721da5cee9 |
driver core: remove CONFIG_SYSFS_DEPRECATED and CONFIG_SYSFS_DEPRECATED_V2
CONFIG_SYSFS_DEPRECATED was added in commit 88a22c985e35
("CONFIG_SYSFS_DEPRECATED") in 2006 to allow systems with older versions
of some tools (i.e. Fedora 3's version of udev) to boot properly. Four
years later, in 2010, the option was attempted to be removed as most of
userspace should have been fixed up properly by then, but some kernel
developers clung to those old systems and refused to update, so we added
CONFIG_SYSFS_DEPRECATED_V2 in commit e52eec13cd6b ("SYSFS: Allow boot
time switching between deprecated and modern sysfs layout") to allow
them to continue to boot properly, and we allowed a boot time parameter
to be used to switch back to the old format if needed.
Over time, the logic that was covered under these config options was
slowly removed from individual driver subsystems successfully, removed,
and the only thing that is now left in the kernel are some changes in
the block layer's representation in sysfs where real directories are
used instead of symlinks like normal.
Because the original changes were done to userspace tools in 2006, and
all distros that use those tools are long end-of-life, and older
non-udev-based systems do not care about the block layer's sysfs
representation, it is time to finally remove this old logic and the
config entries from the kernel.
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: linux-block@vger.kernel.org
Cc: linux-doc@vger.kernel.org
Acked-by: Jens Axboe <axboe@kernel.dk>
Link: https://lore.kernel.org/r/20230223073326.2073220-1-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
||
|
Linus Torvalds
|
7f9ec7d816 |
A small set of updates for x86:
- Return -EIO instead of success when the certificate buffer for SEV
guests is not large enough.
- Allow STIPB to be enabled with legacy IBSR. Legacy IBRS is cleared on
return to userspace for performance reasons, but the leaves user space
vulnerable to cross-thread attacks which STIBP prevents. Update the
documentation accordingly.
-----BEGIN PGP SIGNATURE-----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=1RwH
-----END PGP SIGNATURE-----
Merge tag 'x86-urgent-2023-03-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 updates from Thomas Gleixner:
"A small set of updates for x86:
- Return -EIO instead of success when the certificate buffer for SEV
guests is not large enough
- Allow STIPB to be enabled with legacy IBSR. Legacy IBRS is cleared
on return to userspace for performance reasons, but the leaves user
space vulnerable to cross-thread attacks which STIBP prevents.
Update the documentation accordingly"
* tag 'x86-urgent-2023-03-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
virt/sev-guest: Return -EIO if certificate buffer is not large enough
Documentation/hw-vuln: Document the interaction between IBRS and STIBP
x86/speculation: Allow enabling STIBP with legacy IBRS
|
||
|
KP Singh
|
e02b50ca44 |
Documentation/hw-vuln: Document the interaction between IBRS and STIBP
Explain why STIBP is needed with legacy IBRS as currently implemented
(KERNEL_IBRS) and why STIBP is not needed when enhanced IBRS is enabled.
Fixes: 7c693f54c873 ("x86/speculation: Add spectre_v2=ibrs option to support Kernel IBRS")
Signed-off-by: KP Singh <kpsingh@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20230227060541.1939092-2-kpsingh@kernel.org
|
||
|
Linus Torvalds
|
4b8c673b76 |
media updates for v6.3-rc1
-----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEE+QmuaPwR3wnBdVwACF8+vY7k4RUFAmP7M9AACgkQCF8+vY7k 4RVpxRAAjarn420frUo/YiMWuYiYtDCFmXj+toHgqsa9fcUOjxml9V+S5L0uY6tF D6d9KCgqKf1AO2MDzB3aR1qQmPfelMoSomQjsTm6cWaMPDobxpzL2IlcspMDBxz0 PyCz4R9cCK5kwuBiQlz3dE605/t/7JXOAFEopo5tvYWNfRt9YXFbPJ/Hdttc4cqw d6js3TN7oxHoa+t5Ox9Fq+i6MSxsMEku5RvfHVI6yUs//eWcf9H2zFfZ83vZ7+vY L8PlRzMXlvovsFwXivtiZdSkuwFloWrqIs8btHb1/psClOUxFQhpk2B4hkUixCAn wk9EN7eHWNdbaZha5//uPRmxUjjhIn4XAIXnfslsB7iiRn7uJtYryUnt+b+kD3Lt dtF2i1W7nNfUd5e7YRjipTjgjtazLpeyDGvH0TqfpwK8Wn10Acj+Az1v4bjf+cc0 GC1EVUtGeJhexYzLsHSQMQZB1IgFxUw5LNKdqsrboled3yvxfgK69Yp9FQLon9vZ R7KEDHuzt+e4Kihxq8dTp6wMV47dNrq0wpJKMjfylKhq/MPqa9uiygl1s2KlMg6n HDJQlYbQGlzrgHDDQRhYUAgxs3JeyxAmup2eLR6dWrAqBW+ULT9S2DiggOk9xxKg UkaCkodr3ZOhZti+oLRRAY2cRsGYgan7rKhscd0t7opO+CrfHxo= =0XIw -----END PGP SIGNATURE----- Merge tag 'media/v6.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: - Removal of several VB1-only deprecated drivers: cpia2, fsl-viu, meye, stkwebcam, tm6000, vpfe_capture and zr364xx - saa7146 recovered from staging/deprecated. We opted to give ti a chance, and, instead of deprecating it, the intention is to write patches migrating it from VB1 to VB2. - av7110 returned from staging/deprecated/ to staging/ as we're not planning on dropping it any time soon - media controller API has gained experimental support for G_ROUTING and streams API. No drivers use it right now. We're planning to add one after -rc1, giving some time to experience the API and eventually have changes during the next development cycle - New sensor drivers: imx296, imx415, ov8858 - Atomisp had lots of changes, specially on its sensor's interface, making atomisp sensor drivers closer to normal sensor drivers - media controller kAPI has gained some helpers to traverse pipelines - uvcvideo now better support power line control - lots of bug fixes, cleanups and driver improvements * tag 'media/v6.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (296 commits) media: imx-mipi-csis: Check csis_fmt validity before use media: v4l2-subdev.c: clear stream field media: v4l2-ctrls-api.c: move ctrl->is_new = 1 to the correct line media: Revert "media: saa7146: deprecate hexium_gemini/orion, mxb and ttpci" media: Revert "media: av7110: move to staging/media/deprecated/saa7146" media: imx-pxp: convert to regmap media: imx-pxp: Use non-threaded IRQ media: imx-pxp: Introduce pxp_read() and pxp_write() wrappers media: imx-pxp: Implement frame size enumeration media: imx-pxp: Pass pixel format value to find_format() media: imx-pxp: Add media controller support media: imx-pxp: Don't set bus_info manually in .querycap() media: imx-pxp: Sort headers alphabetically media: imx-pxp: add support for i.MX7D media: imx-pxp: make data_path_ctrl0 platform dependent media: imx-pxp: disable LUT block media: imx-pxp: explicitly disable unused blocks media: imx-pxp: extract helper function to setup data path media: imx-pxp: detect PXP version media: dt-bindings: media: fsl-pxp: convert to yaml ... |
||
|
Linus Torvalds
|
49d5759268 |
ARM:
- Provide a virtual cache topology to the guest to avoid
inconsistencies with migration on heterogenous systems. Non secure
software has no practical need to traverse the caches by set/way in
the first place.
- Add support for taking stage-2 access faults in parallel. This was an
accidental omission in the original parallel faults implementation,
but should provide a marginal improvement to machines w/o FEAT_HAFDBS
(such as hardware from the fruit company).
- A preamble to adding support for nested virtualization to KVM,
including vEL2 register state, rudimentary nested exception handling
and masking unsupported features for nested guests.
- Fixes to the PSCI relay that avoid an unexpected host SVE trap when
resuming a CPU when running pKVM.
- VGIC maintenance interrupt support for the AIC
- Improvements to the arch timer emulation, primarily aimed at reducing
the trap overhead of running nested.
- Add CONFIG_USERFAULTFD to the KVM selftests config fragment in the
interest of CI systems.
- Avoid VM-wide stop-the-world operations when a vCPU accesses its own
redistributor.
- Serialize when toggling CPACR_EL1.SMEN to avoid unexpected exceptions
in the host.
- Aesthetic and comment/kerneldoc fixes
- Drop the vestiges of the old Columbia mailing list and add [Oliver]
as co-maintainer
This also drags in arm64's 'for-next/sme2' branch, because both it and
the PSCI relay changes touch the EL2 initialization code.
RISC-V:
- Fix wrong usage of PGDIR_SIZE instead of PUD_SIZE
- Correctly place the guest in S-mode after redirecting a trap to the guest
- Redirect illegal instruction traps to guest
- SBI PMU support for guest
s390:
- Two patches sorting out confusion between virtual and physical
addresses, which currently are the same on s390.
- A new ioctl that performs cmpxchg on guest memory
- A few fixes
x86:
- Change tdp_mmu to a read-only parameter
- Separate TDP and shadow MMU page fault paths
- Enable Hyper-V invariant TSC control
- Fix a variety of APICv and AVIC bugs, some of them real-world,
some of them affecting architecurally legal but unlikely to
happen in practice
- Mark APIC timer as expired if its in one-shot mode and the count
underflows while the vCPU task was being migrated
- Advertise support for Intel's new fast REP string features
- Fix a double-shootdown issue in the emergency reboot code
- Ensure GIF=1 and disable SVM during an emergency reboot, i.e. give SVM
similar treatment to VMX
- Update Xen's TSC info CPUID sub-leaves as appropriate
- Add support for Hyper-V's extended hypercalls, where "support" at this
point is just forwarding the hypercalls to userspace
- Clean up the kvm->lock vs. kvm->srcu sequences when updating the PMU and
MSR filters
- One-off fixes and cleanups
- Fix and cleanup the range-based TLB flushing code, used when KVM is
running on Hyper-V
- Add support for filtering PMU events using a mask. If userspace
wants to restrict heavily what events the guest can use, it can now
do so without needing an absurd number of filter entries
- Clean up KVM's handling of "PMU MSRs to save", especially when vPMU
support is disabled
- Add PEBS support for Intel Sapphire Rapids
- Fix a mostly benign overflow bug in SEV's send|receive_update_data()
- Move several SVM-specific flags into vcpu_svm
x86 Intel:
- Handle NMI VM-Exits before leaving the noinstr region
- A few trivial cleanups in the VM-Enter flows
- Stop enabling VMFUNC for L1 purely to document that KVM doesn't support
EPTP switching (or any other VM function) for L1
- Fix a crash when using eVMCS's enlighted MSR bitmaps
Generic:
- Clean up the hardware enable and initialization flow, which was
scattered around multiple arch-specific hooks. Instead, just
let the arch code call into generic code. Both x86 and ARM should
benefit from not having to fight common KVM code's notion of how
to do initialization.
- Account allocations in generic kvm_arch_alloc_vm()
- Fix a memory leak if coalesced MMIO unregistration fails
selftests:
- On x86, cache the CPU vendor (AMD vs. Intel) and use the info to emit
the correct hypercall instruction instead of relying on KVM to patch
in VMMCALL
- Use TAP interface for kvm_binary_stats_test and tsc_msrs_test
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmP2YA0UHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroPg/Qf+J6nT+TkIa+8Ei+fN1oMTDp4YuIOx
mXvJ9mRK9sQ+tAUVwvDz3qN/fK5mjsYbRHIDlVc5p2Q3bCrVGDDqXPFfCcLx1u+O
9U9xjkO4JxD2LS9pc70FYOyzVNeJ8VMGOBbC2b0lkdYZ4KnUc6e/WWFKJs96bK+H
duo+RIVyaMthnvbTwSv1K3qQb61n6lSJXplywS8KWFK6NZAmBiEFDAWGRYQE9lLs
VcVcG0iDJNL/BQJ5InKCcvXVGskcCm9erDszPo7w4Bypa4S9AMS42DHUaRZrBJwV
/WqdH7ckIz7+OSV0W1j+bKTHAFVTCjXYOM7wQykgjawjICzMSnnG9Gpskw==
=goe1
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"ARM:
- Provide a virtual cache topology to the guest to avoid
inconsistencies with migration on heterogenous systems. Non secure
software has no practical need to traverse the caches by set/way in
the first place
- Add support for taking stage-2 access faults in parallel. This was
an accidental omission in the original parallel faults
implementation, but should provide a marginal improvement to
machines w/o FEAT_HAFDBS (such as hardware from the fruit company)
- A preamble to adding support for nested virtualization to KVM,
including vEL2 register state, rudimentary nested exception
handling and masking unsupported features for nested guests
- Fixes to the PSCI relay that avoid an unexpected host SVE trap when
resuming a CPU when running pKVM
- VGIC maintenance interrupt support for the AIC
- Improvements to the arch timer emulation, primarily aimed at
reducing the trap overhead of running nested
- Add CONFIG_USERFAULTFD to the KVM selftests config fragment in the
interest of CI systems
- Avoid VM-wide stop-the-world operations when a vCPU accesses its
own redistributor
- Serialize when toggling CPACR_EL1.SMEN to avoid unexpected
exceptions in the host
- Aesthetic and comment/kerneldoc fixes
- Drop the vestiges of the old Columbia mailing list and add [Oliver]
as co-maintainer
RISC-V:
- Fix wrong usage of PGDIR_SIZE instead of PUD_SIZE
- Correctly place the guest in S-mode after redirecting a trap to the
guest
- Redirect illegal instruction traps to guest
- SBI PMU support for guest
s390:
- Sort out confusion between virtual and physical addresses, which
currently are the same on s390
- A new ioctl that performs cmpxchg on guest memory
- A few fixes
x86:
- Change tdp_mmu to a read-only parameter
- Separate TDP and shadow MMU page fault paths
- Enable Hyper-V invariant TSC control
- Fix a variety of APICv and AVIC bugs, some of them real-world, some
of them affecting architecurally legal but unlikely to happen in
practice
- Mark APIC timer as expired if its in one-shot mode and the count
underflows while the vCPU task was being migrated
- Advertise support for Intel's new fast REP string features
- Fix a double-shootdown issue in the emergency reboot code
- Ensure GIF=1 and disable SVM during an emergency reboot, i.e. give
SVM similar treatment to VMX
- Update Xen's TSC info CPUID sub-leaves as appropriate
- Add support for Hyper-V's extended hypercalls, where "support" at
this point is just forwarding the hypercalls to userspace
- Clean up the kvm->lock vs. kvm->srcu sequences when updating the
PMU and MSR filters
- One-off fixes and cleanups
- Fix and cleanup the range-based TLB flushing code, used when KVM is
running on Hyper-V
- Add support for filtering PMU events using a mask. If userspace
wants to restrict heavily what events the guest can use, it can now
do so without needing an absurd number of filter entries
- Clean up KVM's handling of "PMU MSRs to save", especially when vPMU
support is disabled
- Add PEBS support for Intel Sapphire Rapids
- Fix a mostly benign overflow bug in SEV's
send|receive_update_data()
- Move several SVM-specific flags into vcpu_svm
x86 Intel:
- Handle NMI VM-Exits before leaving the noinstr region
- A few trivial cleanups in the VM-Enter flows
- Stop enabling VMFUNC for L1 purely to document that KVM doesn't
support EPTP switching (or any other VM function) for L1
- Fix a crash when using eVMCS's enlighted MSR bitmaps
Generic:
- Clean up the hardware enable and initialization flow, which was
scattered around multiple arch-specific hooks. Instead, just let
the arch code call into generic code. Both x86 and ARM should
benefit from not having to fight common KVM code's notion of how to
do initialization
- Account allocations in generic kvm_arch_alloc_vm()
- Fix a memory leak if coalesced MMIO unregistration fails
selftests:
- On x86, cache the CPU vendor (AMD vs. Intel) and use the info to
emit the correct hypercall instruction instead of relying on KVM to
patch in VMMCALL
- Use TAP interface for kvm_binary_stats_test and tsc_msrs_test"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (325 commits)
KVM: SVM: hyper-v: placate modpost section mismatch error
KVM: x86/mmu: Make tdp_mmu_allowed static
KVM: arm64: nv: Use reg_to_encoding() to get sysreg ID
KVM: arm64: nv: Only toggle cache for virtual EL2 when SCTLR_EL2 changes
KVM: arm64: nv: Filter out unsupported features from ID regs
KVM: arm64: nv: Emulate EL12 register accesses from the virtual EL2
KVM: arm64: nv: Allow a sysreg to be hidden from userspace only
KVM: arm64: nv: Emulate PSTATE.M for a guest hypervisor
KVM: arm64: nv: Add accessors for SPSR_EL1, ELR_EL1 and VBAR_EL1 from virtual EL2
KVM: arm64: nv: Handle SMCs taken from virtual EL2
KVM: arm64: nv: Handle trapped ERET from virtual EL2
KVM: arm64: nv: Inject HVC exceptions to the virtual EL2
KVM: arm64: nv: Support virtual EL2 exceptions
KVM: arm64: nv: Handle HCR_EL2.NV system register traps
KVM: arm64: nv: Add nested virt VCPU primitives for vEL2 VCPU state
KVM: arm64: nv: Add EL2 system registers to vcpu context
KVM: arm64: nv: Allow userspace to set PSR_MODE_EL2x
KVM: arm64: nv: Reset VCPU to EL2 registers if VCPU nested virt is set
KVM: arm64: nv: Introduce nested virtualization VCPU feature
KVM: arm64: Use the S2 MMU context to iterate over S2 table
...
|
||
|
Linus Torvalds
|
90ddb3f034 |
pci-v6.3-changes
-----BEGIN PGP SIGNATURE-----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=/y4d
-----END PGP SIGNATURE-----
Merge tag 'pci-v6.3-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull PCI updates from Bjorn Helgaas:
"Enumeration:
- Rework portdrv shutdown so it disables interrupts but doesn't
disable bus mastering, which leads to hangs on Loongson LS7A
- Add mechanism to prevent Max_Read_Request_Size (MRRS) increases,
again to avoid hardware issues on Loongson LS7A (and likely other
devices based on DesignWare IP)
- Ignore devices with a firmware (DT or ACPI) node that says the
device is disabled
Resource management:
- Distribute spare resources to unconfigured hotplug bridges at
boot-time (not just when hot-adding such a bridge), which makes
hot-adding devices to docks work better. Tried this in v6.1 but had
to revert for regressions, so try again
- Fix root bus issue that dropped resources that happened to end
at 0, e.g., [bus 00]
PCI device hotplug:
- Remove device locking when marking device as disconnected so this
doesn't have to wait for concurrent driver bind/unbind to complete
- Quirk more Qualcomm bridges that don't fully implement the PCIe
Slot Status 'Command Completed' bit
Power management:
- Account for _S0W of the target bridge in acpi_pci_bridge_d3() so we
don't miss hot-add notifications for USB4 docks, Thunderbolt, etc
Reset:
- Observe delay after reset, e.g., resuming from system sleep,
regardless of whether a bridge can suspend to D3cold at runtime
- Wait for secondary bus to become ready after a bridge reset
Virtualization:
- Avoid FLR on some AMD FCH AHCI adapters where it doesn't work
- Allow independent IOMMU groups for some Wangxun NICs that prevent
peer-to-peer transactions but don't advertise an ACS Capability
Error handling:
- Configure End-to-End-CRC (ECRC) only if Linux owns the AER
Capability
- Remove redundant Device Control Error Reporting Enable in the AER
service driver since this is already done for all devices during
enumeration
ASPM:
- Add pci_enable_link_state() interface to allow drivers to enable
ASPM link state
Endpoint framework:
- Move dra7xx and tegra194 linkup processing from hard IRQ to
threaded IRQ handler
- Add a separate lock for endpoint controller list of endpoint
function drivers to prevent deadlock in callbacks
- Pass events from endpoint controller to endpoint function drivers
via callbacks instead of notifiers
Synopsys DesignWare eDMA controller driver (acked by Vinod):
- Fix CPU vs PCI address issues
- Fix source vs destination address issues
- Fix issues with interleaved transfer semantics
- Fix channel count initialization issue (issue still exists in
several other drivers)
- Clean up and improve debugfs usage so it will work on platforms
with several eDMA devices
Baikal T-1 PCIe controller driver:
- Set a 64-bit DMA mask
Freescale i.MX6 PCIe controller driver:
- Add i.MX8MM, i.MX8MQ, i.MX8MP endpoint mode DT binding and driver
support
Intel VMD host bridge driver:
- Add quirk to configure PCIe ASPM and LTR. This is normally done by
BIOS, and will be for future products
Marvell MVEBU PCIe controller driver:
- Mark this driver as broken in Kconfig since bugs prevent its daily
usage
MediaTek MT7621 PCIe controller driver:
- Delay PHY port initialization to improve boot reliability for ZBT
WE1326, ZBT WF3526-P, and some Netgear models
Qualcomm PCIe controller driver:
- Add MSM8998 DT compatible string
- Unify MSM8996 and MSM8998 clock orderings
- Add SM8350 DT binding and driver support
- Add IPQ8074 Gen3 DT binding and driver support
- Correct qcom,perst-regs in DT binding
- Add qcom_pcie_host_deinit() so the PHY is powered off and
regulators and clocks are disabled on late host-init errors
Socionext UniPhier Pro5 controller driver:
- Clean up uniphier-ep reg, clocks, resets, and their names in DT
binding
Synopsys DesignWare PCIe controller driver:
- Restrict coherent DMA mask to 32 bits for MSI, but allow controller
drivers to set 64-bit streaming DMA mask
- Add eDMA engine support in both Root Port and Endpoint controllers
Miscellaneous:
- Remove MODULE_LICENSE from boolean drivers so they don't look like
modules so modprobe can complain about them"
* tag 'pci-v6.3-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (86 commits)
PCI: dwc: Add Root Port and Endpoint controller eDMA engine support
PCI: bt1: Set 64-bit DMA mask
PCI: dwc: Restrict only coherent DMA mask for MSI address allocation
dmaengine: dw-edma: Prepare dw_edma_probe() for builtin callers
dmaengine: dw-edma: Depend on DW_EDMA instead of selecting it
dmaengine: dw-edma: Add mem-mapped LL-entries support
PCI: Remove MODULE_LICENSE so boolean drivers don't look like modules
PCI: hv: Drop duplicate PCI_MSI dependency
PCI/P2PDMA: Annotate RCU dereference
PCI/sysfs: Constify struct kobj_type pci_slot_ktype
PCI: hotplug: Allow marking devices as disconnected during bind/unbind
PCI: pciehp: Add Qualcomm quirk for Command Completed erratum
PCI: qcom: Add IPQ8074 Gen3 port support
dt-bindings: PCI: qcom: Add IPQ8074 Gen3 port
dt-bindings: PCI: qcom: Sort compatibles alphabetically
PCI: qcom: Fix host-init error handling
PCI: qcom: Add SM8350 support
dt-bindings: PCI: qcom: Add SM8350
dt-bindings: PCI: qcom-ep: Correct qcom,perst-regs
dt-bindings: PCI: qcom: Unify MSM8996 and MSM8998 clock order
...
|
||
|
Linus Torvalds
|
17cd4d6f05 |
TTY/Serial driver updates for 6.3-rc1
Here is the big set of serial and tty driver updates for 6.3-rc1. Once again, Jiri and Ilpo have done a number of core vt and tty/serial layer cleanups that were much needed and appreciated. Other than that, it's just a bunch of little tty/serial driver updates: - qcom-geni-serial driver updates - liteuart driver updates - hvcs driver cleanups - n_gsm updates and additions for new features - more 8250 device support added - fpga/dfl update and additions - imx serial driver updates - fsl_lpuart updates - other tiny fixes and updates for serial drivers All of these have been in linux-next for a while with no reported problems. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCY/itAw8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+ykJbQCfWv/J4ZElO108iHBU5mJCDagUDBgAnAtLLN6A SEAnnokGCDtA/BNIXeES =luRi -----END PGP SIGNATURE----- Merge tag 'tty-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty / serial driver updates from Greg KH: "Here is the big set of serial and tty driver updates for 6.3-rc1. Once again, Jiri and Ilpo have done a number of core vt and tty/serial layer cleanups that were much needed and appreciated. Other than that, it's just a bunch of little tty/serial driver updates: - qcom-geni-serial driver updates - liteuart driver updates - hvcs driver cleanups - n_gsm updates and additions for new features - more 8250 device support added - fpga/dfl update and additions - imx serial driver updates - fsl_lpuart updates - other tiny fixes and updates for serial drivers All of these have been in linux-next for a while with no reported problems" * tag 'tty-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (143 commits) tty: n_gsm: add keep alive support serial: imx: remove a redundant check dt-bindings: serial: snps-dw-apb-uart: add dma & dma-names properties soc: qcom: geni-se: Move qcom-geni-se.h to linux/soc/qcom/geni-se.h tty: n_gsm: add TIOCMIWAIT support tty: n_gsm: add RING/CD control support tty: n_gsm: mark unusable ioctl structure fields accordingly serial: imx: get rid of registers shadowing serial: imx: refine local variables in rxint() serial: imx: stop using USR2 in FIFO reading loop serial: imx: remove redundant USR2 read from FIFO reading loop serial: imx: do not break from FIFO reading loop prematurely serial: imx: do not sysrq broken chars serial: imx: work-around for hardware RX flood serial: imx: factor-out common code to imx_uart_soft_reset() serial: 8250_pci1xxxx: Add power management functions to quad-uart driver serial: 8250_pci1xxxx: Add RS485 support to quad-uart driver serial: 8250_pci1xxxx: Add driver for quad-uart support serial: 8250_pci: Add serial8250_pci_setup_port definition in 8250_pcilib.c tty: pcn_uart: fix memory leak with using debugfs_lookup() ... |
||
|
Linus Torvalds
|
d2980d8d82 |
There is no particular theme here - mainly quick hits all over the tree.
Most notable is a set of zlib changes from Mikhail Zaslonko which enhances and fixes zlib's use of S390 hardware support: "lib/zlib: Set of s390 DFLTCC related patches for kernel zlib". -----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCY/QC4QAKCRDdBJ7gKXxA jtKdAQCbDCBdY8H45d1fONzQW2UDqCPnOi77MpVUxGL33r+1SAEA807C7rvDEmlf yP1Ft+722fFU5jogVU8ZFh+vapv2/gI= =Q9YK -----END PGP SIGNATURE----- Merge tag 'mm-nonmm-stable-2023-02-20-15-29' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull non-MM updates from Andrew Morton: "There is no particular theme here - mainly quick hits all over the tree. Most notable is a set of zlib changes from Mikhail Zaslonko which enhances and fixes zlib's use of S390 hardware support: 'lib/zlib: Set of s390 DFLTCC related patches for kernel zlib'" * tag 'mm-nonmm-stable-2023-02-20-15-29' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (55 commits) Update CREDITS file entry for Jesper Juhl sparc: allow PM configs for sparc32 COMPILE_TEST hung_task: print message when hung_task_warnings gets down to zero. arch/Kconfig: fix indentation scripts/tags.sh: fix the Kconfig tags generation when using latest ctags nilfs2: prevent WARNING in nilfs_dat_commit_end() lib/zlib: remove redundation assignement of avail_in dfltcc_gdht() lib/Kconfig.debug: do not enable DEBUG_PREEMPT by default lib/zlib: DFLTCC always switch to software inflate for Z_PACKET_FLUSH option lib/zlib: DFLTCC support inflate with small window lib/zlib: Split deflate and inflate states for DFLTCC lib/zlib: DFLTCC not writing header bits when avail_out == 0 lib/zlib: fix DFLTCC ignoring flush modes when avail_in == 0 lib/zlib: fix DFLTCC not flushing EOBS when creating raw streams lib/zlib: implement switching between DFLTCC and software lib/zlib: adjust offset calculation for dfltcc_state nilfs2: replace WARN_ONs for invalid DAT metadata block requests scripts/spelling.txt: add "exsits" pattern and fix typo instances fs: gracefully handle ->get_block not mapping bh in __mpage_writepage cramfs: Kconfig: fix spelling & punctuation ... |
||
|
Linus Torvalds
|
3822a7c409 |
- Daniel Verkamp has contributed a memfd series ("mm/memfd: add
F_SEAL_EXEC") which permits the setting of the memfd execute bit at
memfd creation time, with the option of sealing the state of the X bit.
- Peter Xu adds a patch series ("mm/hugetlb: Make huge_pte_offset()
thread-safe for pmd unshare") which addresses a rare race condition
related to PMD unsharing.
- Several folioification patch serieses from Matthew Wilcox, Vishal
Moola, Sidhartha Kumar and Lorenzo Stoakes
- Johannes Weiner has a series ("mm: push down lock_page_memcg()") which
does perform some memcg maintenance and cleanup work.
- SeongJae Park has added DAMOS filtering to DAMON, with the series
"mm/damon/core: implement damos filter". These filters provide users
with finer-grained control over DAMOS's actions. SeongJae has also done
some DAMON cleanup work.
- Kairui Song adds a series ("Clean up and fixes for swap").
- Vernon Yang contributed the series "Clean up and refinement for maple
tree".
- Yu Zhao has contributed the "mm: multi-gen LRU: memcg LRU" series. It
adds to MGLRU an LRU of memcgs, to improve the scalability of global
reclaim.
- David Hildenbrand has added some userfaultfd cleanup work in the
series "mm: uffd-wp + change_protection() cleanups".
- Christoph Hellwig has removed the generic_writepages() library
function in the series "remove generic_writepages".
- Baolin Wang has performed some maintenance on the compaction code in
his series "Some small improvements for compaction".
- Sidhartha Kumar is doing some maintenance work on struct page in his
series "Get rid of tail page fields".
- David Hildenbrand contributed some cleanup, bugfixing and
generalization of pte management and of pte debugging in his series "mm:
support __HAVE_ARCH_PTE_SWP_EXCLUSIVE on all architectures with swap
PTEs".
- Mel Gorman and Neil Brown have removed the __GFP_ATOMIC allocation
flag in the series "Discard __GFP_ATOMIC".
- Sergey Senozhatsky has improved zsmalloc's memory utilization with his
series "zsmalloc: make zspage chain size configurable".
- Joey Gouly has added prctl() support for prohibiting the creation of
writeable+executable mappings. The previous BPF-based approach had
shortcomings. See "mm: In-kernel support for memory-deny-write-execute
(MDWE)".
- Waiman Long did some kmemleak cleanup and bugfixing in the series
"mm/kmemleak: Simplify kmemleak_cond_resched() & fix UAF".
- T.J. Alumbaugh has contributed some MGLRU cleanup work in his series
"mm: multi-gen LRU: improve".
- Jiaqi Yan has provided some enhancements to our memory error
statistics reporting, mainly by presenting the statistics on a per-node
basis. See the series "Introduce per NUMA node memory error
statistics".
- Mel Gorman has a second and hopefully final shot at fixing a CPU-hog
regression in compaction via his series "Fix excessive CPU usage during
compaction".
- Christoph Hellwig does some vmalloc maintenance work in the series
"cleanup vfree and vunmap".
- Christoph Hellwig has removed block_device_operations.rw_page() in ths
series "remove ->rw_page".
- We get some maple_tree improvements and cleanups in Liam Howlett's
series "VMA tree type safety and remove __vma_adjust()".
- Suren Baghdasaryan has done some work on the maintainability of our
vm_flags handling in the series "introduce vm_flags modifier functions".
- Some pagemap cleanup and generalization work in Mike Rapoport's series
"mm, arch: add generic implementation of pfn_valid() for FLATMEM" and
"fixups for generic implementation of pfn_valid()"
- Baoquan He has done some work to make /proc/vmallocinfo and
/proc/kcore better represent the real state of things in his series
"mm/vmalloc.c: allow vread() to read out vm_map_ram areas".
- Jason Gunthorpe rationalized the GUP system's interface to the rest of
the kernel in the series "Simplify the external interface for GUP".
- SeongJae Park wishes to migrate people from DAMON's debugfs interface
over to its sysfs interface. To support this, we'll temporarily be
printing warnings when people use the debugfs interface. See the series
"mm/damon: deprecate DAMON debugfs interface".
- Andrey Konovalov provided the accurately named "lib/stackdepot: fixes
and clean-ups" series.
- Huang Ying has provided a dramatic reduction in migration's TLB flush
IPI rates with the series "migrate_pages(): batch TLB flushing".
- Arnd Bergmann has some objtool fixups in "objtool warning fixes".
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCY/PoPQAKCRDdBJ7gKXxA
jlvpAPsFECUBBl20qSue2zCYWnHC7Yk4q9ytTkPB/MMDrFEN9wD/SNKEm2UoK6/K
DmxHkn0LAitGgJRS/W9w81yrgig9tAQ=
=MlGs
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2023-02-20-13-37' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- Daniel Verkamp has contributed a memfd series ("mm/memfd: add
F_SEAL_EXEC") which permits the setting of the memfd execute bit at
memfd creation time, with the option of sealing the state of the X
bit.
- Peter Xu adds a patch series ("mm/hugetlb: Make huge_pte_offset()
thread-safe for pmd unshare") which addresses a rare race condition
related to PMD unsharing.
- Several folioification patch serieses from Matthew Wilcox, Vishal
Moola, Sidhartha Kumar and Lorenzo Stoakes
- Johannes Weiner has a series ("mm: push down lock_page_memcg()")
which does perform some memcg maintenance and cleanup work.
- SeongJae Park has added DAMOS filtering to DAMON, with the series
"mm/damon/core: implement damos filter".
These filters provide users with finer-grained control over DAMOS's
actions. SeongJae has also done some DAMON cleanup work.
- Kairui Song adds a series ("Clean up and fixes for swap").
- Vernon Yang contributed the series "Clean up and refinement for maple
tree".
- Yu Zhao has contributed the "mm: multi-gen LRU: memcg LRU" series. It
adds to MGLRU an LRU of memcgs, to improve the scalability of global
reclaim.
- David Hildenbrand has added some userfaultfd cleanup work in the
series "mm: uffd-wp + change_protection() cleanups".
- Christoph Hellwig has removed the generic_writepages() library
function in the series "remove generic_writepages".
- Baolin Wang has performed some maintenance on the compaction code in
his series "Some small improvements for compaction".
- Sidhartha Kumar is doing some maintenance work on struct page in his
series "Get rid of tail page fields".
- David Hildenbrand contributed some cleanup, bugfixing and
generalization of pte management and of pte debugging in his series
"mm: support __HAVE_ARCH_PTE_SWP_EXCLUSIVE on all architectures with
swap PTEs".
- Mel Gorman and Neil Brown have removed the __GFP_ATOMIC allocation
flag in the series "Discard __GFP_ATOMIC".
- Sergey Senozhatsky has improved zsmalloc's memory utilization with
his series "zsmalloc: make zspage chain size configurable".
- Joey Gouly has added prctl() support for prohibiting the creation of
writeable+executable mappings.
The previous BPF-based approach had shortcomings. See "mm: In-kernel
support for memory-deny-write-execute (MDWE)".
- Waiman Long did some kmemleak cleanup and bugfixing in the series
"mm/kmemleak: Simplify kmemleak_cond_resched() & fix UAF".
- T.J. Alumbaugh has contributed some MGLRU cleanup work in his series
"mm: multi-gen LRU: improve".
- Jiaqi Yan has provided some enhancements to our memory error
statistics reporting, mainly by presenting the statistics on a
per-node basis. See the series "Introduce per NUMA node memory error
statistics".
- Mel Gorman has a second and hopefully final shot at fixing a CPU-hog
regression in compaction via his series "Fix excessive CPU usage
during compaction".
- Christoph Hellwig does some vmalloc maintenance work in the series
"cleanup vfree and vunmap".
- Christoph Hellwig has removed block_device_operations.rw_page() in
ths series "remove ->rw_page".
- We get some maple_tree improvements and cleanups in Liam Howlett's
series "VMA tree type safety and remove __vma_adjust()".
- Suren Baghdasaryan has done some work on the maintainability of our
vm_flags handling in the series "introduce vm_flags modifier
functions".
- Some pagemap cleanup and generalization work in Mike Rapoport's
series "mm, arch: add generic implementation of pfn_valid() for
FLATMEM" and "fixups for generic implementation of pfn_valid()"
- Baoquan He has done some work to make /proc/vmallocinfo and
/proc/kcore better represent the real state of things in his series
"mm/vmalloc.c: allow vread() to read out vm_map_ram areas".
- Jason Gunthorpe rationalized the GUP system's interface to the rest
of the kernel in the series "Simplify the external interface for
GUP".
- SeongJae Park wishes to migrate people from DAMON's debugfs interface
over to its sysfs interface. To support this, we'll temporarily be
printing warnings when people use the debugfs interface. See the
series "mm/damon: deprecate DAMON debugfs interface".
- Andrey Konovalov provided the accurately named "lib/stackdepot: fixes
and clean-ups" series.
- Huang Ying has provided a dramatic reduction in migration's TLB flush
IPI rates with the series "migrate_pages(): batch TLB flushing".
- Arnd Bergmann has some objtool fixups in "objtool warning fixes".
* tag 'mm-stable-2023-02-20-13-37' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (505 commits)
include/linux/migrate.h: remove unneeded externs
mm/memory_hotplug: cleanup return value handing in do_migrate_range()
mm/uffd: fix comment in handling pte markers
mm: change to return bool for isolate_movable_page()
mm: hugetlb: change to return bool for isolate_hugetlb()
mm: change to return bool for isolate_lru_page()
mm: change to return bool for folio_isolate_lru()
objtool: add UACCESS exceptions for __tsan_volatile_read/write
kmsan: disable ftrace in kmsan core code
kasan: mark addr_has_metadata __always_inline
mm: memcontrol: rename memcg_kmem_enabled()
sh: initialize max_mapnr
m68k/nommu: add missing definition of ARCH_PFN_OFFSET
mm: percpu: fix incorrect size in pcpu_obj_full_size()
maple_tree: reduce stack usage with gcc-9 and earlier
mm: page_alloc: call panic() when memoryless node allocation fails
mm: multi-gen LRU: avoid futile retries
migrate_pages: move THP/hugetlb migration support check to simplify code
migrate_pages: batch flushing TLB
migrate_pages: share more code between _unmap and _move
...
|
||
|
Linus Torvalds
|
f2b98d0af2 |
bootconfig for v6.3:
- Fix ftrace2bconf.sh tool for checking event enable status correctly. - Add CONFIG_BOOT_CONFIG_FORCE to apply bootconfig without 'bootconfig' boot parameter. - Enable CONFIG_BOOT_CONFIG_FORCE by default if a bootconfig is embedded in the kernel. - Increase max number of nodes of bootconfig to 8192. -----BEGIN PGP SIGNATURE----- iQEzBAABCgAdFiEEh7BulGwFlgAOi5DV2/sHvwUrPxsFAmP1VUUACgkQ2/sHvwUr PxuExQgAslUeGrdn8nAA2qsModVHrXwLl1Xa6797Xzh/xCoIOAQ5AaUkGOlBBpCi 0UGsiqo5pLfrJ7q1HCTiD4kNpDcK6Kw9UbjClMS2nSf58hK98upUAng+4VlTH3dZ difzua1Y0PohBDsLZpV5Ex/K9ZHiPhm44pqkaA+q0gHBfa5AmFuRUD3icEdiHmFu B3GX0qdIMeFmUhxt0jmfvsu1Xq8fjF3Lsz/xCeOHcNJYyxzmdttxHYY8pLTWOIoL xGL2MmwIYzLRW3/r9E71JNCLgykUWZSBbYhcJ7lIAJadFNbNBFJ0+v5uiyxbZEib Xv5UAyTKSIeZIyH0fUZ/4Ufa8sw5Nw== =0Nnb -----END PGP SIGNATURE----- Merge tag 'bootconfig-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace Pull bootconfig updates from Masami Hiramatsu: - Fix ftrace2bconf.sh tool for checking event enable status correctly - Add CONFIG_BOOT_CONFIG_FORCE to apply bootconfig without 'bootconfig' boot parameter - Enable CONFIG_BOOT_CONFIG_FORCE by default if a bootconfig is embedded in the kernel - Increase max number of nodes of bootconfig to 8192 * tag 'bootconfig-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: bootconfig: Increase max nodes of bootconfig from 1024 to 8192 for DCC support bootconfig: Default BOOT_CONFIG_FORCE to y if BOOT_CONFIG_EMBED Allow forcing unconditional bootconfig processing tools/bootconfig: fix single & used for logical condition |
||
|
Linus Torvalds
|
d876315445 |
printk changes for 6.3
-----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEESH4wyp42V4tXvYsjUqAMR0iAlPIFAmP0vCsACgkQUqAMR0iA lPKjHxAAldxJr7B5XZWRbYOw9VAQ/Qv0whfZwJ0Wl1crhx/PrB6JBkTbz/vHMj+c vZSQXOID5g858+iR7KdvejWFTnr7RdBP28rkRj6zijXYBAlrNwQtV+aXS/AHyCjR 2/cMuP6+7vqaVp8BqDyToQrZil6Us5Io/a6l4C0RQp1nQmY5A8qLg7kdtpPOcIoW yBWY+5pMJVfryr95yOjE7WxBVjpIh5eo/D1WoexoxcJNsHpe/2mAvXfZMNLMHBKL Io0RSZfrD0Pw+oHyhpX7bLxRbmYO8kajBMtMvPa2NIMQyk/Cm+2SSvDS39n1B4vm eXym5hUfSZIZUGV1cegia/exZgfvj3yCEc+8HJ0WEenlFruxXCtqwPbFwtkjsznK EjgOEehygaHGiQ7LY9cEA5ON5e7MIGsYUp+EAS2vNja81yBmAK89TlOtezzKIyU2 U4q4UUsXi4TMMNzvNu0bs4gEu2HOCTovE1O0h7C56haoVHSWWqexepvRwNhAWELY ztQz5hd8S7UIILGDTnx8nCc7W8RddfLZfl2XBuzr9gWp79SqeaGKOk10jkjBkatC 1STqkCN+Jwx5uIdF8LLg4EaNJ8QQCdDaCLvQpSJbQpFIYz7KCwk/hhczdCLsWrrp feGEwSD5u2ek5cEk840WfvKlle6fsqtLb6m98UV2/WJpjW9qtSo= =cVoE -----END PGP SIGNATURE----- Merge tag 'printk-for-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux Pull printk updates from Petr Mladek: - Refactor printk code for formatting messages that are shown on consoles. This is a preparatory step for introducing atomic consoles which could not share the global buffers - Prevent memory leak when removing printk index in debugfs - Dump also the newest printk message by the sample gdbmacro - Fix a compiler warning * tag 'printk-for-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux: printf: fix errname.c list kernel/printk/index.c: fix memory leak with using debugfs_lookup() printk: Use scnprintf() to print the message about the dropped messages on a console printk: adjust string limit macros printk: use printk_buffers for devkmsg printk: introduce console_prepend_dropped() for dropped messages printk: introduce printk_get_next_message() and printk_message printk: introduce struct printk_buffers console: Document struct console console: Use BIT() macros for @flags values printk: move size limit macros into internal.h docs: gdbmacros: print newest record |
||
|
Linus Torvalds
|
b72b5fecc1 |
tracing updates for 6.3:
- Add function names as a way to filter function addresses - Add sample module to test ftrace ops and dynamic trampolines - Allow stack traces to be passed from beginning event to end event for synthetic events. This will allow seeing the stack trace of when a task is scheduled out and recorded when it gets scheduled back in. - Add trace event helper __get_buf() to use as a temporary buffer when printing out trace event output. - Add kernel command line to create trace instances on boot up. - Add enabling of events to instances created at boot up. - Add trace_array_puts() to write into instances. - Allow boot instances to take a snapshot at the end of boot up. - Allow live patch modules to include trace events - Minor fixes and clean ups -----BEGIN PGP SIGNATURE----- iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCY/PaaBQccm9zdGVkdEBn b29kbWlzLm9yZwAKCRAp5XQQmuv6qh5iAPoD0LKZzD33rhO5Ec4hoexE0DkqycP3 dvmOMbCBL8GkxwEA+d2gLz/EquSFm166hc4D79Sn3geCqvkwmy8vQWVjIQc= =M82D -----END PGP SIGNATURE----- Merge tag 'trace-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace Pull tracing updates from Steven Rostedt: - Add function names as a way to filter function addresses - Add sample module to test ftrace ops and dynamic trampolines - Allow stack traces to be passed from beginning event to end event for synthetic events. This will allow seeing the stack trace of when a task is scheduled out and recorded when it gets scheduled back in. - Add trace event helper __get_buf() to use as a temporary buffer when printing out trace event output. - Add kernel command line to create trace instances on boot up. - Add enabling of events to instances created at boot up. - Add trace_array_puts() to write into instances. - Allow boot instances to take a snapshot at the end of boot up. - Allow live patch modules to include trace events - Minor fixes and clean ups * tag 'trace-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (31 commits) tracing: Remove unnecessary NULL assignment tracepoint: Allow livepatch module add trace event tracing: Always use canonical ftrace path tracing/histogram: Fix stacktrace histogram Documententation tracing/histogram: Fix stacktrace key tracing/histogram: Fix a few problems with stacktrace variable printing tracing: Add BUILD_BUG() to make sure stacktrace fits in strings tracing/histogram: Don't use strlen to find length of stacktrace variables tracing: Allow boot instances to have snapshot buffers tracing: Add trace_array_puts() to write into instance tracing: Add enabling of events to boot instances tracing: Add creation of instances at boot command line tracing: Fix trace_event_raw_event_synth() if else statement samples: ftrace: Make some global variables static ftrace: sample: avoid open-coded 64-bit division samples: ftrace: Include the nospec-branch.h only for x86 tracing: Acquire buffer from temparary trace sequence tracing/histogram: Wrap remaining shell snippets in code blocks tracing/osnoise: No need for schedule_hrtimeout range bpf/tracing: Use stage6 of tracing to not duplicate macros ... |
||
|
Linus Torvalds
|
28e335208c |
New code for 6.3-rc1:
* Eliminate repeated boxing and unboxing of log item parameters.
* Clean up some confusing variable names in the log item code.
* Fix a deadlock when doing unwritten extent conversion that causes a
bmbt split when there are sustained memory shortages and the worker
pool runs out of worker threads.
* Fix the panic_mask debug knob not being able to trigger on verifier
errors.
* Constify kobj_type objects.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQ2qTKExjcn+O1o2YRKO3ySh0YRpgUCY+Z6BwAKCRBKO3ySh0YR
pkQJAQCjkzXqZuj8WH/g22S01smT51QhmX+1ubLdzMYSvRvrKQD+MlH74EcgurQD
GhgCWJh6dBTx1nICKpCXYgVD9Glvowc=
=J2Xw
-----END PGP SIGNATURE-----
Merge tag 'xfs-6.3-merge-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs updates from Darrick Wong:
"There's a couple of bug fixes, some cleanups for inconsistent variable
names and reduction of struct boxing and unboxing in the logging code.
More work is pending, which will begin reworking allocation group
lifetimes and finally replace confusing indirect calls to the
allocator with actual ... function calls. But I want to let that
experience another week of testing.
Summary:
- Eliminate repeated boxing and unboxing of log item parameters
- Clean up some confusing variable names in the log item code
- Fix a deadlock when doing unwritten extent conversion that causes a
bmbt split when there are sustained memory shortages and the worker
pool runs out of worker threads
- Fix the panic_mask debug knob not being able to trigger on verifier
errors
- Constify kobj_type objects"
* tag 'xfs-6.3-merge-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: revert commit 8954c44ff477
xfs: make kobj_type structures constant
xfs: allow setting full range of panic tags
xfs: don't use BMBT btree split workers for IO completion
xfs: fix confusing variable names in xfs_refcount_item.c
xfs: pass refcount intent directly through the log intent code
xfs: fix confusing variable names in xfs_rmap_item.c
xfs: pass rmap space mapping directly through the log intent code
xfs: fix confusing xfs_extent_item variable names
xfs: pass xfs_extent_free_item directly through the log intent code
xfs: fix confusing variable names in xfs_bmap_item.c
xfs: pass the xfs_bmbt_irec directly through the log intent code
xfs: use strscpy() to instead of strncpy()
|