mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git
synced 2025-01-15 21:23:23 +00:00
68172 Commits
Author | SHA1 | Message | Date | |
---|---|---|---|---|
Linus Torvalds
|
b1dfbda863 |
The main load of changes is related to Uwe's work converting platform
remove callbacks to return void. Comes next (in number of changes) Kees' additional structures annotations to improve the sanitizers. The usual amount of cleanups apply. About the more substancial contribution, one main function of the partitions core could return an error which was not checked, this is now fixed. On the bindings side, fixed partitions can now have a compression property. Finally, an erroneous situation is now always avoided in the MAP RAM driver. * CFI A several years old byte swap has been fixed. * NAND The subsystem has, as usual, seen a bit of cleanup being done this cycle, typically return values of platform_get_irq() and devm_kasprintf(). There is also a better ECC check in the Arasan driver. This comes with smaller misc changes. In the SPI-NAND world there is now support for Foresee F35SQA002G, Winbond W25N and XTX XT26 chips. * SPI NOR For SPI NOR we cleaned the flash info entries in order to have them slimmer and self explanatory. In order to make the entries as slim as possible, we introduced sane default values so that the actual flash entries don't need to specify them. We now use a flexible macro to specify the flash ID instead of the previous INFOx() macros that had hardcoded ID lengths. Instead of: - { "w25q512nwm", INFO(0xef8020, 0, 64 * 1024, 0) - OTP_INFO(256, 3, 0x1000, 0x1000) }, We now use: + .id = SNOR_ID(0xef, 0x80, 0x20), + .name = "w25q512nwm", + .otp = SNOR_OTP(256, 3, 0x1000, 0x1000), We also removed some flash entries: the very old Catalyst SPI EEPROMs that were introduced once with the SPI-NOR subsystem, and a Fujitsu MRAM. Both should use the at25 EEPROM driver. The latter even has device tree bindings for the at25 driver. We made sure that the conversion didn't introduce any unwanted changes by comparing the .rodata segment before and after the conversion. The patches landed in linux-next immediately after v6.6-rc2, we haven't seen any regressions yet. Apart of the autumn cleaning we introduced a new flash entry, at25ff321a, and added block protection support for mt25qu512a. -----BEGIN PGP SIGNATURE----- iQEzBAABCgAdFiEE9HuaYnbmDhq/XIDIJWrqGEe9VoQFAmVGJNgACgkQJWrqGEe9 VoQ5ggf/flUHU7RI02T7HNwkHayq/NOgaGIUkUZEwdfEBd6/8nLzpDeh9UuQCBvO izOdRSiDDhcav6YsKs+7UKnonY0uZ5VwB3cjRcgWzsI/nyARs5CeV8VJxqxiGYqU 25rZVVVoNr/4eV6kb9Sx0yUTLobidlNKtpv0w0hLFoVu+eb35RzE/MHaYmialM87 W4W/aHxJH/Nsz9hi13FWE4CpbRYbg2hEBsQhaQV/Uvf4htxYZ+H0ItZGMm/Lsjk4 31eCbgH4yOP2DaQi5KRtvZauKMptqWOo+3ymjDGDi7soQe2qRa5BFsH8cz9/2lDk hxLk/mGKB4jfnkAaOv5dc0CTcYsnuQ== =V+qH -----END PGP SIGNATURE----- Merge tag 'mtd/for-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux Pull mtd updates from Miquel Raynal: "The main set of changes is related to Uwe's work converting platform remove callbacks to return void. Comes next (in number of changes) Kees' additional structures annotations to improve the sanitizers. The usual amount of cleanups apply. About the more substancial contribution, one main function of the partitions core could return an error which was not checked, this is now fixed. On the bindings side, fixed partitions can now have a compression property. Finally, an erroneous situation is now always avoided in the MAP RAM driver. CFI: - A several years old byte swap has been fixed. NAND: - The subsystem has, as usual, seen a bit of cleanup being done this cycle, typically return values of platform_get_irq() and devm_kasprintf(). There is also a better ECC check in the Arasan driver. This comes with smaller misc changes. - In the SPI-NAND world there is now support for Foresee F35SQA002G, Winbond W25N and XTX XT26 chips. SPI NOR: - For SPI NOR we cleaned the flash info entries in order to have them slimmer and self explanatory. In order to make the entries as slim as possible, we introduced sane default values so that the actual flash entries don't need to specify them. We now use a flexible macro to specify the flash ID instead of the previous INFOx() macros that had hardcoded ID lengths. Instead of: { "w25q512nwm", INFO(0xef8020, 0, 64 * 1024, 0) OTP_INFO(256, 3, 0x1000, 0x1000) }, We now use: .id = SNOR_ID(0xef, 0x80, 0x20), .name = "w25q512nwm", .otp = SNOR_OTP(256, 3, 0x1000, 0x1000), - We also removed some flash entries: the very old Catalyst SPI EEPROMs that were introduced once with the SPI-NOR subsystem, and a Fujitsu MRAM. Both should use the at25 EEPROM driver. The latter even has device tree bindings for the at25 driver. - We made sure that the conversion didn't introduce any unwanted changes by comparing the .rodata segment before and after the conversion. The patches landed in linux-next immediately after v6.6-rc2, we haven't seen any regressions yet. - Apart of the autumn cleaning we introduced a new flash entry, at25ff321a, and added block protection support for mt25qu512a" * tag 'mtd/for-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (91 commits) mtd: cfi_cmdset_0001: Byte swap OTP info mtd: rawnand: meson: check return value of devm_kasprintf() mtd: rawnand: intel: check return value of devm_kasprintf() mtd: rawnand: sh_flctl: Convert to module_platform_driver() mtd: spi-nor: micron-st: use SFDP table for mt25qu512a mtd: spi-nor: micron-st: enable lock/unlock for mt25qu512a mtd: rawnand: Remove unused of_gpio.h inclusion mtd: spinand: Add support for XTX XT26xxxDxxxxx mtd: spinand: winbond: add support for serial NAND flash mtd: rawnand: cadence: Annotate struct cdns_nand_chip with __counted_by mtd: rawnand: Annotate struct mtk_nfc_nand_chip with __counted_by mtd: spinand: add support for FORESEE F35SQA002G mtd: rawnand: rockchip: Use struct_size() mtd: rawnand: arasan: Include ECC syndrome along with in-band data while checking for ECC failure mtd: Use device_get_match_data() mtd: spi-nor: nxp-spifi: Convert to platform remove callback returning void mtd: spi-nor: hisi-sfc: Convert to platform remove callback returning void mtd: maps: sun_uflash: Convert to platform remove callback returning void mtd: maps: sa1100-flash: Convert to platform remove callback returning void mtd: maps: pxa2xx-flash: Convert to platform remove callback returning void ... |
||
Linus Torvalds
|
0a23fb262d |
Major microcode loader restructuring, cleanup and improvements by Thomas
Gleixner: - Restructure the code needed for it and add a temporary initrd mapping on 32-bit so that the loader can access the microcode blobs. This in itself is a preparation for the next major improvement: - Do not load microcode on 32-bit before paging has been enabled. Handling this has caused an endless stream of headaches, issues, ugly code and unnecessary hacks in the past. And there really wasn't any sensible reason to do that in the first place. So switch the 32-bit loading to happen after paging has been enabled and turn the loader code "real purrty" again - Drop mixed microcode steppings loading on Intel - there, a single patch loaded on the whole system is sufficient - Rework late loading to track which CPUs have updated microcode successfully and which haven't, act accordingly - Move late microcode loading on Intel in NMI context in order to guarantee concurrent loading on all threads - Make the late loading CPU-hotplug-safe and have the offlined threads be woken up for the purpose of the update - Add support for a minimum revision which determines whether late microcode loading is safe on a machine and the microcode does not change software visible features which the machine cannot use anyway since feature detection has happened already. Roughly, the minimum revision is the smallest revision number which must be loaded currently on the system so that late updates can be allowed - Other nice leanups, fixess, etc all over the place -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAmVE0xkACgkQEsHwGGHe VUrCuBAAhOqqwkYPiGXPWd2hvdn1zGtD5fvEdXn3Orzd+Lwc6YaQTsCxCjIO/0ws 8inpPFuOeGz4TZcplzipi3G5oatPVc7ORDuW+/BvQQQljZOsSKfhiaC29t6dvS6z UG3sbCXKVwlJ5Kwv3Qe4eWur4Ex6GeFDZkIvBCmbaAdGPFlfu1i2uO1yBooNP1Rs GiUkp+dP1/KREWwR/dOIsHYL2QjWIWfHQEWit/9Bj46rxE9ERx/TWt3AeKPfKriO Wp0JKp6QY78jg6a0a2/JVmbT1BKz69Z9aPp6hl4P2MfbBYOnqijRhdezFW0NyqV2 pn6nsuiLIiXbnSOEw0+Wdnw5Q0qhICs5B5eaBfQrwgfZ8pxPHv2Ir777GvUTV01E Dv0ZpYsHa+mHe17nlK8V3+4eajt0PetExcXAYNiIE+pCb7pLjjKkl8e+lcEvEsO0 QSL3zG5i5RWUMPYUvaFRgepWy3k/GPIoDQjRcUD3P+1T0GmnogNN10MMNhmOzfWU pyafe4tJUOVsq0HJ7V/bxIHk2p+Q+5JLKh5xBm9janE4BpabmSQnvFWNblVfK4ig M9ohjI/yMtgXROC4xkNXgi8wE5jfDKBghT6FjTqKWSV45vknF1mNEjvuaY+aRZ3H MB4P3HCj+PKWJimWHRYnDshcytkgcgVcYDiim8va/4UDrw8O2ks= =JOZu -----END PGP SIGNATURE----- Merge tag 'x86_microcode_for_v6.7_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 microcode loading updates from Borislac Petkov: "Major microcode loader restructuring, cleanup and improvements by Thomas Gleixner: - Restructure the code needed for it and add a temporary initrd mapping on 32-bit so that the loader can access the microcode blobs. This in itself is a preparation for the next major improvement: - Do not load microcode on 32-bit before paging has been enabled. Handling this has caused an endless stream of headaches, issues, ugly code and unnecessary hacks in the past. And there really wasn't any sensible reason to do that in the first place. So switch the 32-bit loading to happen after paging has been enabled and turn the loader code "real purrty" again - Drop mixed microcode steppings loading on Intel - there, a single patch loaded on the whole system is sufficient - Rework late loading to track which CPUs have updated microcode successfully and which haven't, act accordingly - Move late microcode loading on Intel in NMI context in order to guarantee concurrent loading on all threads - Make the late loading CPU-hotplug-safe and have the offlined threads be woken up for the purpose of the update - Add support for a minimum revision which determines whether late microcode loading is safe on a machine and the microcode does not change software visible features which the machine cannot use anyway since feature detection has happened already. Roughly, the minimum revision is the smallest revision number which must be loaded currently on the system so that late updates can be allowed - Other nice leanups, fixess, etc all over the place" * tag 'x86_microcode_for_v6.7_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (40 commits) x86/microcode/intel: Add a minimum required revision for late loading x86/microcode: Prepare for minimal revision check x86/microcode: Handle "offline" CPUs correctly x86/apic: Provide apic_force_nmi_on_cpu() x86/microcode: Protect against instrumentation x86/microcode: Rendezvous and load in NMI x86/microcode: Replace the all-in-one rendevous handler x86/microcode: Provide new control functions x86/microcode: Add per CPU control field x86/microcode: Add per CPU result state x86/microcode: Sanitize __wait_for_cpus() x86/microcode: Clarify the late load logic x86/microcode: Handle "nosmt" correctly x86/microcode: Clean up mc_cpu_down_prep() x86/microcode: Get rid of the schedule work indirection x86/microcode: Mop up early loading leftovers x86/microcode/amd: Use cached microcode for AP load x86/microcode/amd: Cache builtin/initrd microcode early x86/microcode/amd: Cache builtin microcode too x86/microcode/amd: Use correct per CPU ucode_cpu_info ... |
||
Linus Torvalds
|
5c5e048b24 |
Kbuild updates for v6.7
- Implement the binary search in modpost for faster symbol lookup - Respect HOSTCC when linking host programs written in Rust - Change the binrpm-pkg target to generate kernel-devel RPM package - Fix endianness issues for tee and ishtp MODULE_DEVICE_TABLE - Unify vdso_install rules - Remove unused __memexit* annotations - Eliminate stale whitelisting for __devinit/__devexit from modpost - Enable dummy-tools to handle the -fpatchable-function-entry flag - Add 'userldlibs' syntax -----BEGIN PGP SIGNATURE----- iQJJBAABCgAzFiEEbmPs18K1szRHjPqEPYsBB53g2wYFAmVFIZgVHG1hc2FoaXJv eUBrZXJuZWwub3JnAAoJED2LAQed4NsGeKwP+wd2kCrxAgS4zPffOcO3cVHfZwJe AXOrTp/v73gzxb9eHXH6TmEDf1Rv7EwW3fmmGJosopJGD6itBqzJa4bNDrbq40rY XStmg0NRmTrIG20CHGgaGWxb8/7WMrYfu0rhFdUXJjmbny6XwJ3US9FvDPC0mZz7 w9VCq5CZOqMsJcQyGkAR7uCHDRzNWiZ/Vnfbz3aa6abFzp7dsjhOgDy5SQ6qZgQz AwHHKNEN+G3HWmGDZqcbV9aDaCk4btnz64h843RAxjy2HNJF360Ohm2KOcdJr5lo DSSStkogBkZNSRQPtqtfknDjzITjeF4JAnUw5ivOtt8ERaO3JRUcr5gHjfw5iV/n o4pC1SXmFzdfoN4dogoYF9rz3j955mSFlT/DSbSbuQS/ELzQs0nsqERxhV4zNCsX KvYPUqKzZLW3i8pHNuhh7z7t4Nbz1zXqUa19FvaLNtFTCtS8/IA868a59S0uqT9I EAIqrNy9qAsk8UuQUxWVx0qf9f5wKGYxW62iMIF9F2lsFRWA8H588CFPUuSU9Bhk KAsvzq249MUGJd0RAjF92EWJgNz/nYzZfFTEL5HKAVauYY5UCyR3AVjrak761I8z ctVskA7eVkaW4eARfcp15Fna15FHVzxBJ3B26oKYIJBQfJLjzZcV8XeMtEcQjEGU jzl+oRqB/Q3oD7Nx =PeX7 -----END PGP SIGNATURE----- Merge tag 'kbuild-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild updates from Masahiro Yamada: - Implement the binary search in modpost for faster symbol lookup - Respect HOSTCC when linking host programs written in Rust - Change the binrpm-pkg target to generate kernel-devel RPM package - Fix endianness issues for tee and ishtp MODULE_DEVICE_TABLE - Unify vdso_install rules - Remove unused __memexit* annotations - Eliminate stale whitelisting for __devinit/__devexit from modpost - Enable dummy-tools to handle the -fpatchable-function-entry flag - Add 'userldlibs' syntax * tag 'kbuild-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (30 commits) kbuild: support 'userldlibs' syntax kbuild: dummy-tools: pretend we understand -fpatchable-function-entry kbuild: Correct missing architecture-specific hyphens modpost: squash ALL_{INIT,EXIT}_TEXT_SECTIONS to ALL_TEXT_SECTIONS modpost: merge sectioncheck table entries regarding init/exit sections modpost: use ALL_INIT_SECTIONS for the section check from DATA_SECTIONS modpost: disallow the combination of EXPORT_SYMBOL and __meminit* modpost: remove EXIT_SECTIONS macro modpost: remove MEM_INIT_SECTIONS macro modpost: remove more symbol patterns from the section check whitelist modpost: disallow *driver to reference .meminit* sections linux/init: remove __memexit* annotations modpost: remove ALL_EXIT_DATA_SECTIONS macro kbuild: simplify cmd_ld_multi_m kbuild: avoid too many execution of scripts/pahole-flags.sh kbuild: remove ARCH_POSTLINK from module builds kbuild: unify no-compiler-targets and no-sync-config-targets kbuild: unify vdso_install rules docs: kbuild: add INSTALL_DTBS_PATH UML: remove unused cmd_vdso_install ... |
||
Miquel Raynal
|
3a8ab4a13d |
For SPI NOR we cleaned the flash info entries in order to have
them slimmer and self explanatory. In order to make the entries as slim as possible, we introduced sane default values so that the actual flash entries don't need to specify them. We now use a flexible macro to specify the flash ID instead of the previous INFOx() macros that had hardcoded ID lengths. Instead of: - { "w25q512nwm", INFO(0xef8020, 0, 64 * 1024, 0) - OTP_INFO(256, 3, 0x1000, 0x1000) }, We now use: + .id = SNOR_ID(0xef, 0x80, 0x20), + .name = "w25q512nwm", + .otp = SNOR_OTP(256, 3, 0x1000, 0x1000), We also removed some flash entries: the very old Catalyst SPI EEPROMs that were introduced once with the SPI-NOR subsystem, and a Fujitsu MRAM. Both should use the at25 EEPROM driver. The latter even has device tree bindings for the at25 driver. We made sure that the conversion didn't introduce any unwanted changes by comparing the .rodata segment before and after the conversion. The patches landed in linux-next immediately after v6.6-rc2, we haven't seen any regressions yet. Apart of the autumn cleaning we introduced a new flash entry, at25ff321a, and added block protection support for mt25qu512a. -----BEGIN PGP SIGNATURE----- iQEzBAABCgAdFiEEHUIqys8OyG1eHf7fS1VPR6WNFOkFAmUvhfgACgkQS1VPR6WN FOlQUAf/ZFUi5nktXOERKghKIwQulTIWdxsV2ZitezzFEPeObHaXR/kiF53mKbyS txutJglHFYpsLaLptGwrUja2bWVI5OEZCLknIsRRPH4wy3aWlyef1yonl6//U/O9 lWLEKcUFgsmJKTe+Ga6BWJFBlExCfhPM6Hu9q3O/z0cV107fNdHBo41p9Xvn2B3l miNyxhsojdXfDIFexjZHC+kYS5cQv9fRLyBKDvWoAsjSj9HoPt9Y/46x2TKfsJ83 d8JJH8ABwk6hpgjcTECorqcljsB6FdQ80s+0klmrfqO1UBt0ptrS/OwcmYMuivZn urpGYUAWFgFGivBb+nUfG/VgAQ3E7w== =qzxq -----END PGP SIGNATURE----- Merge tag 'spi-nor/for-6.7' into mtd/next For SPI NOR we cleaned the flash info entries in order to have them slimmer and self explanatory. In order to make the entries as slim as possible, we introduced sane default values so that the actual flash entries don't need to specify them. We now use a flexible macro to specify the flash ID instead of the previous INFOx() macros that had hardcoded ID lengths. Instead of: - { "w25q512nwm", INFO(0xef8020, 0, 64 * 1024, 0) - OTP_INFO(256, 3, 0x1000, 0x1000) }, We now use: + .id = SNOR_ID(0xef, 0x80, 0x20), + .name = "w25q512nwm", + .otp = SNOR_OTP(256, 3, 0x1000, 0x1000), We also removed some flash entries: the very old Catalyst SPI EEPROMs that were introduced once with the SPI-NOR subsystem, and a Fujitsu MRAM. Both should use the at25 EEPROM driver. The latter even has device tree bindings for the at25 driver. We made sure that the conversion didn't introduce any unwanted changes by comparing the .rodata segment before and after the conversion. The patches landed in linux-next immediately after v6.6-rc2, we haven't seen any regressions yet. Apart of the autumn cleaning we introduced a new flash entry, at25ff321a, and added block protection support for mt25qu512a. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> |
||
Linus Torvalds
|
90b0c2b2ed |
Pin control changes for the v6.7 kernel cycle
New drivers: - Realtek RTD family pin control driver and RTD1619B, RTD1319D and RTD1315E subdrivers. - Nuvoton NPCM8xx combined pin control and GPIO driver. - Amlogic T7 pin control driver. - Renesas RZ/G3S pin control driver. Improvements: - A number of additional UART groups added to the Mediatek MT7981 driver. - MPM pin maps added for Qualcomm MSM8996, SM6115, SM6125 and SDM660. - Extra GPIO banks for the Sunxi H616. - MLSP I2C6 function support in Qualcomm MSM8226. - Some __counted_by() annotations for dynamic arrays. - Ongoing work to make remove() return void. - LSBC groups and functions in the Renesas R8A7778. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEElDRnuGcz/wPCXQWMQRCzN7AZXXMFAmVEp+oACgkQQRCzN7AZ XXPmqg/7BX2u2/1jpOpEjoqbUC7KEU3ptR2j1vAMCBibBq0IsnHVUH3DQ80leEpf gcf5vbY72PCTg5KGYZZ35XvrqzEP/z25qOnUZ+4Y7JljoXyNBb6eW1I3UstdPR1C E9hFVjMVFD7YePCGK/Ytwp/1dFLgLsADjk6Zc4gfHlPV/Op8NaxIIcM0FjFvu+X1 znf3lRkaxedhdM0TsL6efOoNXJNHGZNXI+dUzgbEr+fyYcjHJFjh8HejJvcZDyvc 581k6EVE0aGBz857OZz+ojADhtnE2+GYCB2kkdT5iHFeHtHGbRrwIc6Fh3gInMBI 6yj86AaZEFJwLec/ckMn+kWdKwF17Q2qUOryr7UHlU8YP5DBAjSAZaocFynNto+I ikQPde2s04tRpveMCJSYnvy2eQpJ2DEpWtkSAGMzg0Ly71zfSH1TMrhjR9AxDP0F nrIBB7hEzTosxvrFTXHcCh8LxSDlohUL/UveA2Tiz/m1gvR51OnIx61EzqizHF5x WkuLxgLlC4P1ZqFyV1guwcOqUD4rpwpqTyIgAIoVIQfnvZR5jgFXHBKDJPXyjJTD oDEX8fVWX0xzwAoqBXqVs/TJcD9q8qKuuPaK8266XP5D/zM/PP1jRKQnC8IFPSq2 Ory4TDLCrSmVw+c8q+jZHgKiEXuwGzPJ+ImypTMV+uZZzCdR4YE= =vonG -----END PGP SIGNATURE----- Merge tag 'pinctrl-v6.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "No pin control core changes this time. New drivers: - Realtek RTD family pin control driver and RTD1619B, RTD1319D and RTD1315E subdrivers - Nuvoton NPCM8xx combined pin control and GPIO driver - Amlogic T7 pin control driver - Renesas RZ/G3S pin control driver Improvements: - A number of additional UART groups added to the Mediatek MT7981 driver - MPM pin maps added for Qualcomm MSM8996, SM6115, SM6125 and SDM660 - Extra GPIO banks for the Sunxi H616 - MLSP I2C6 function support in Qualcomm MSM8226 - Some __counted_by() annotations for dynamic arrays - Ongoing work to make remove() return void - LSBC groups and functions in the Renesas R8A7778" * tag 'pinctrl-v6.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (110 commits) pinctrl: Use device_get_match_data() dt-bindings: pinctrl: qcom,sa8775p-tlmm: add missing wakeup-parent dt-bindings: pinctrl: nuvoton,npcm845: Add missing additionalProperties on gpio child nodes dt-bindings: pinctrl: brcm: Ensure all child node properties are documented pinctrl: renesas: rzn1: Convert to platform remove callback returning void pinctrl: renesas: rzg2l: Add RZ/G3S support dt-bindings: pinctrl: renesas: Document RZ/G3S SoC pinctrl: renesas: rzg2l: Add support for different DS values on different groups pinctrl: renesas: rzg2l: Move DS and OI to SoC-specific configuration pinctrl: renesas: rzg2l: Adapt function number for RZ/G3S pinctrl: renesas: rzg2l: Adapt for different SD/PWPR register offsets pinctrl: renesas: rzg2l: Index all registers based on port offset pinctrl: renesas: rzg2l: Add validation of GPIO pin in rzg2l_gpio_request() pinctrl: renesas: r8a7778: Add LBSC pins, groups, and functions pinctrl: intel: fetch community only when we need it pinctrl: cherryview: reduce scope of PIN_CONFIG_BIAS_HIGH_IMPEDANCE case pinctrl: cherryview: Convert to platform remove callback returning void pinctrl: sprd-sc9860: Convert to platform remove callback returning void pinctrl: qcom/msm: Convert to platform remove callback returning void pinctrl: qcom/lpi: Convert to platform remove callback returning void ... |
||
Linus Torvalds
|
bfafa2c19d |
phy-for-6.6
- New Support - Qualcomm sa8775p qmp-pcie support, IPQ5018 support, SC7280 qmp-ufs support - Mediatek MT8188 support - Updates - Device tree device_get_match_data() usage and dropping of_match_device() calls - Qualcomm qmp usb and combo phy updates for v6 register layout - Qualcomm eusb2-repeater updates for tuning overrides, regmap fields - STih407 usb binding and ralink usb-phy yaml conversion - renesas r8a779f0 serdes init sequencing updates -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEE+vs47OPLdNbVcHzyfBQHDyUjg0cFAmVE5rcACgkQfBQHDyUj g0dadhAAhdFR/vj17+Ah7Ru8AShPy1tNLMyFss6+X1+wUBmUYbc5gAmusMi0lIyQ n0GofAVARuNOYK+kNocOWeAqA8w9urKkCtfkAl29KzJ06YqZ0XVpOIW+z+GDCCiy ekGvgSwKpns/g8eZGRQ2r4O5tdwKolkVSk0SgLeeqtUfGKxLx6U+LS9/XOeO6GlZ XQaUpohuutr7xln8JTsJNWIOmYvqWZHUNe5R1Mdy15gyRYOLPZMqaSMPXhiUd/iL BJGHtWFJfqQRr7hbma6Ri9DunZAAGTdyfAefdVitTt66Ls9lT/jHxm8ky19C7oTC 8GgfCMdE1ZdgxckGRKDWUBXIGT61x7dJ4EDfOQo25RRTOEh/1JPFOFvsWICTXHkt xLBnip8zX7f5OgejAGQXlXjsrmpBaYZM8J6+02oc9AzA2FCiD/ca7oB420Q5v9uw LMuLdv6eOHrzCEwhYOJYR4t4XxRCDFKk5QTu9LQWasUB5fJMJzZ8118s+2AylBEw l7EX6XFJ7nlCVUGiFHnqJCPwZDnnJw+irvre8Id0QYoJxW6XsSET49Us5Uh9I0vs grhn0WNVJ93yk87u2uTJkfhXUjajy6Mw0oy/zLyZ3KztY4u5dx/8NV+pYNEiGFiO ggc63Mv/QdR9KbJiKsJtxTOyuw1eG0e2j3RrEQvxqaBEPZLvTjs= =y7oj -----END PGP SIGNATURE----- Merge tag 'phy-for-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy Pull generic phy updates from Vinod Koul: "New Support: - Qualcomm sa8775p qmp-pcie, IPQ5018, and SC7280 qmp-ufs support - Mediatek MT8188 support Updates: - Device tree device_get_match_data() usage and dropping of_match_device() calls - Qualcomm qmp usb and combo phy updates for v6 register layout - Qualcomm eusb2-repeater updates for tuning overrides, regmap fields - STih407 usb binding and ralink usb-phy yaml conversion - renesas r8a779f0 serdes init sequencing updates" * tag 'phy-for-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (32 commits) phy: Remove duplicated include in phy-ralink-usb.c phy: Kconfig: Select GENERIC_PHY for GENERIC_PHY_MIPI_DPHY phy: qcom-qmp-pcie: add endpoint support for sa8775p dt-bindings: phy: ralink-usb-phy: convert to dtschema dt-bindings: phy: Convert PXA1928 USB/HSIC PHY to DT schema phy: Drop unnecessary of_match_device() calls phy: rockchip-inno-usb2: Drop unnecessary DT includes phy: Use device_get_match_data() phy: realtek: Replace of_device.h with explicit includes phy: renesas: r8a779f0-ether-serdes: Add .exit() ops phy: renesas: r8a779f0-ether-serdes: Reset in .init() phy: qcom-qmp-combo: use v6 registers in v6 regs layout phy: qcom-qmp-usb: move PCS v6 register to the proper header phy: qcom-qmp-combo: fix the prefix for the PCS_USB v6 registers phy: sun4i-usb: update array size phy: qualcomm: phy-qcom-eusb2-repeater: Add tuning overrides phy: qualcomm: phy-qcom-eusb2-repeater: Zero out untouched tuning regs phy: qualcomm: phy-qcom-eusb2-repeater: Use regmap_fields dt-bindings: phy: qcom,snps-eusb2-repeater: Add magic tuning overrides dt-bindings: phy: Add compatible for Mediatek MT8188 ... |
||
Linus Torvalds
|
d934aef6bb |
dmaengine updates for v6.7
Updates: - Big pile of __counted_by attribute annotations to several structures for bounds checking of flexible arrays at run-time - Another big pile platform remove callback returning void changes - Device tree device_get_match_data() usage and dropping of_match_device() calls - Minor driver updates to pxa, idxd fsl, hisi etc drivers -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEE+vs47OPLdNbVcHzyfBQHDyUjg0cFAmVE43oACgkQfBQHDyUj g0clYg/9Fxm042/2teLU1z3kggXSsCzLYg3NIDEdU/8AGQyJtb8van2mBnnUW8Rh LoOf+b0HZEAyBQUjIYCPCMXovOYKEIjMLRJeZGYUZH3yzi2RImvIAA4FLfKHUTzj JKbbKHYSc226JixKv0td5+Tdd2G+Zpxrr+77HatgU5a43FYlfXgi294rc3uQxSvl moz+0xq/muVTmT5Brva32Ezk2YkmzAmQ+Ek2YK1TI8pQgjqupUtO5/66bzPMYK/Z AsJqGhQ+JXp54cSqRssWzDi6OCrtn1Xh4sAlUhZNC078o+QdOeQu7AN3W9nrYyd7 Kf6kFR8p/c7Q8LxTFKdp1QHam27cbUWJ+WV3olDrHgrAI2LKUYv3KIoD9Q3XvEBt rTRbEjWu6i7G3SOWH+JedoAKLMFtWph5EEIIbCSMbd8jkLidz1/R2cgSn+3m4BF/ t7al3dUyqERq4terM7q+04J8x9W2/Wtg53xizcurzryw+PiWnA0y35vw5JQ1fBpG JXIY6iBx5xWm+jbDRznvkeFhr7dHPXbS3eOJGbUkDumzLafruXd0NlRZcTkA25aR dJt+8e8434T/hVqaMRw+XGpIIS27mfFeJenqQWuj6j9AbFcnmhl72ecXqmD7khRb SfBrkGdtjQSNO5oAVJyVEPZ8Eu+VPF+IKF6PTkWsJqVPBo4RS2o= =DeMU -----END PGP SIGNATURE----- Merge tag 'dmaengine-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine Pull dmaengine updates from Vinod Koul: - Big pile of __counted_by attribute annotations to several structures for bounds checking of flexible arrays at run-time - Another big pile platform remove callback returning void changes - Device tree device_get_match_data() usage and dropping of_match_device() calls - Minor driver updates to pxa, idxd fsl, hisi etc drivers * tag 'dmaengine-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (106 commits) dmaengine: stm32-mdma: correct desc prep when channel running dmaengine: dw-axi-dmac: Add support DMAX_NUM_CHANNELS > 16 dmaengine: xilinx: xilinx_dma: Fix kernel doc about xilinx_dma_remove() dmaengine: mmp_tdma: drop unused variable 'of_id' MAINTAINERS: Add entries for NXP(Freescale) eDMA drivers dmaengine: xilinx: xdma: Support cyclic transfers dmaengine: xilinx: xdma: Prepare the introduction of cyclic transfers dmaengine: Drop unnecessary of_match_device() calls dmaengine: Use device_get_match_data() dmaengine: pxa_dma: Annotate struct pxad_desc_sw with __counted_by dmaengine: pxa_dma: Remove an erroneous BUG_ON() in pxad_free_desc() dmaengine: xilinx: xdma: Use resource_size() in xdma_probe() dmaengine: fsl-dpaa2-qdma: Remove redundant initialization owner in dpaa2_qdma_driver dmaengine: Remove unused declaration dma_chan_cleanup() dmaengine: mmp: fix Wvoid-pointer-to-enum-cast warning dmaengine: qcom: fix Wvoid-pointer-to-enum-cast warning dmaengine: fsl-edma: Remove redundant dev_err() for platform_get_irq() dmaengine: ep93xx_dma: Annotate struct ep93xx_dma_engine with __counted_by dmaengine: idxd: add wq driver name support for accel-config user tool dmaengine: fsl-edma: Annotate struct struct fsl_edma_engine with __counted_by ... |
||
Linus Torvalds
|
2c40c1c6ad |
USB/Thunderbolt changes for 6.7-rc1
Here is the "big" set of USB and Thunderbolt changes for 6.7-rc1. Nothing really major in here, just lots of constant development for new hardware. Included in here are: - Thunderbolt (i.e. USB4) fixes for reported issues and support for new hardware types and devices - USB typec additions of new drivers and cleanups for some existing ones - xhci cleanups and expanded tracing support and some platform specific updates - USB "La Jolla Cove Adapter (LJCA)" support added, and the gpio, spi, and i2c drivers for that type of device (all acked by the respective subsystem maintainers.) - lots of USB gadget driver updates and cleanups - new USB dwc3 platforms supported, as well as other dwc3 fixes and cleanups - USB chipidea driver updates - other smaller driver cleanups and additions, full details in the shortlog All of these have been in the linux-next tree for a while with no reported problems, EXCEPT for some merge conflicts that you will run into in your tree. 2 of them are in device-tree files, which will be trivial to resolve (accept both sides), and the last in the drivers/gpio/gpio-ljca.c file, in the remove callback, resolution should be pretty trivial (take the version in this branch), see here: https://lore.kernel.org/all/20231016134159.11d8f849@canb.auug.org.au/ for details, or I can provide a resolved merge point if needed. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZUStew8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+ykxgQCggUyfGo+JVV8XZVu5A9KwT6nr7mUAmwUgFxhZ khK77t0KqF4hjXryeaHa =iPd+ -----END PGP SIGNATURE----- Merge tag 'usb-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB/Thunderbolt updates from Greg KH: "Here is the "big" set of USB and Thunderbolt changes for 6.7-rc1. Nothing really major in here, just lots of constant development for new hardware. Included in here are: - Thunderbolt (i.e. USB4) fixes for reported issues and support for new hardware types and devices - USB typec additions of new drivers and cleanups for some existing ones - xhci cleanups and expanded tracing support and some platform specific updates - USB "La Jolla Cove Adapter (LJCA)" support added, and the gpio, spi, and i2c drivers for that type of device (all acked by the respective subsystem maintainers.) - lots of USB gadget driver updates and cleanups - new USB dwc3 platforms supported, as well as other dwc3 fixes and cleanups - USB chipidea driver updates - other smaller driver cleanups and additions, full details in the shortlog All of these have been in the linux-next tree for a while with no reported problems" * tag 'usb-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (167 commits) usb: gadget: uvc: Add missing initialization of ssp config descriptor usb: storage: set 1.50 as the lower bcdDevice for older "Super Top" compatibility usb: raw-gadget: report suspend, resume, reset, and disconnect events usb: raw-gadget: don't disable device if usb_ep_queue fails usb: raw-gadget: properly handle interrupted requests usb:cdnsp: remove TRB_FLUSH_ENDPOINT command usb: gadget: aspeed_udc: Convert to platform remove callback returning void dt-bindings: usb: fsa4480: Add compatible for OCP96011 usb: typec: fsa4480: Add support to swap SBU orientation dt-bindings: usb: fsa4480: Add data-lanes property to endpoint usb: typec: tcpm: Fix NULL pointer dereference in tcpm_pd_svdm() Revert "dt-bindings: usb: Add bindings for multiport properties on DWC3 controller" Revert "dt-bindings: usb: qcom,dwc3: Add bindings for SC8280 Multiport" thunderbolt: Fix one kernel-doc comment usb: gadget: f_ncm: Always set current gadget in ncm_bind() usb: core: Remove duplicated check in usb_hub_create_port_device usb: typec: tcpm: Add additional checks for contaminant arm64: dts: rockchip: rk3588s: Add USB3 host controller usb: dwc3: add optional PHY interface clocks dt-bindings: usb: add rk3588 compatible to rockchip,dwc3 ... |
||
Linus Torvalds
|
1f24458a10 |
TTY/Serial changes for 6.7-rc1
Here is the big set of tty/serial driver changes for 6.7-rc1. Included in here are: - console/vgacon cleanups and removals from Arnd - tty core and n_tty cleanups from Jiri - lots of 8250 driver updates and cleanups - sc16is7xx serial driver updates - dt binding updates - first set of port lock wrapers from Thomas for the printk fixes coming in future releases - other small serial and tty core cleanups and updates All of these have been in linux-next for a while with no reported issues. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZUTbaw8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+yk9+gCeKdoRb8FDwGCO/GaoHwR4EzwQXhQAoKXZRmN5 LTtw9sbfGIiBdOTtgLPb =6PJr -----END PGP SIGNATURE----- Merge tag 'tty-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty and serial updates from Greg KH: "Here is the big set of tty/serial driver changes for 6.7-rc1. Included in here are: - console/vgacon cleanups and removals from Arnd - tty core and n_tty cleanups from Jiri - lots of 8250 driver updates and cleanups - sc16is7xx serial driver updates - dt binding updates - first set of port lock wrapers from Thomas for the printk fixes coming in future releases - other small serial and tty core cleanups and updates All of these have been in linux-next for a while with no reported issues" * tag 'tty-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (193 commits) serdev: Replace custom code with device_match_acpi_handle() serdev: Simplify devm_serdev_device_open() function serdev: Make use of device_set_node() tty: n_gsm: add copyright Siemens Mobility GmbH tty: n_gsm: fix race condition in status line change on dead connections serial: core: Fix runtime PM handling for pending tx vgacon: fix mips/sibyte build regression dt-bindings: serial: drop unsupported samsung bindings tty: serial: samsung: drop earlycon support for unsupported platforms tty: 8250: Add note for PX-835 tty: 8250: Fix IS-200 PCI ID comment tty: 8250: Add Brainboxes Oxford Semiconductor-based quirks tty: 8250: Add support for Intashield IX cards tty: 8250: Add support for additional Brainboxes PX cards tty: 8250: Fix up PX-803/PX-857 tty: 8250: Fix port count of PX-257 tty: 8250: Add support for Intashield IS-100 tty: 8250: Add support for Brainboxes UP cards tty: 8250: Add support for additional Brainboxes UC cards tty: 8250: Remove UC-257 and UC-431 ... |
||
Linus Torvalds
|
4c7a0c95ad |
Staging driver updates for 6.7-rc1
Here is the big set of staging driver updates for 6.7-rc1. A bit bigger than 6.6 this time around, as it coincided with the Outreachy and mentorship application process, so we got a bunch of new developers sending in their first changes, which is nice to see. Also in here is a removal of the qlge ethernet driver, and the rtl8192u wireless driver. Both of these were very old and no one was maintaining them, the wireless driver removal was due to no one using it anymore, and no hardware to be found, and is part of a larger effort to remove unused and old wifi drivers from the system. The qlge ethernet driver did have one user pop up after it was dropped, and we are working with the network mainainers to figure out what tree it will come back in from and who will be responsible for it, and if it really is being used or not. Odds are it will show up in a network subsystem pull request after -rc1 is out, but we aren't sure yet. Other smaller changes in here are: - Lots of vc04_services work by Umang to clean up the mess created by the rpi developers long ago, bringing it almost into good enough shape to get out of staging, hopefully next major release, it's getting close. - rtl8192e variable cleanups and removal of unused code and structures - vme_user coding style cleanups - other small coding style cleanups to lots of the staging drivers - octeon typedef removals, and then last-minute revert when it was found to break the build in some configurations (it's a hard driver to build properly, none of the normal automated testing catches it.) All of these have been in linux-next for a while with no reported issues. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZUTg9w8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+ymL+QCg2YS9Mbr7W6zNAdRTbDybzp08ZzUAnRHQXUfB WbZERHQpNOSTE3HwuW1D =tZpl -----END PGP SIGNATURE----- Merge tag 'staging-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging driver updates from Greg KH: "Here is the big set of staging driver updates for 6.7-rc1. A bit bigger than 6.6 this time around, as it coincided with the Outreachy and mentorship application process, so we got a bunch of new developers sending in their first changes, which is nice to see. Also in here is a removal of the qlge ethernet driver, and the rtl8192u wireless driver. Both of these were very old and no one was maintaining them, the wireless driver removal was due to no one using it anymore, and no hardware to be found, and is part of a larger effort to remove unused and old wifi drivers from the system. The qlge ethernet driver did have one user pop up after it was dropped, and we are working with the network mainainers to figure out what tree it will come back in from and who will be responsible for it, and if it really is being used or not. Odds are it will show up in a network subsystem pull request after -rc1 is out, but we aren't sure yet. Other smaller changes in here are: - Lots of vc04_services work by Umang to clean up the mess created by the rpi developers long ago, bringing it almost into good enough shape to get out of staging, hopefully next major release, it's getting close. - rtl8192e variable cleanups and removal of unused code and structures - vme_user coding style cleanups - other small coding style cleanups to lots of the staging drivers - octeon typedef removals, and then last-minute revert when it was found to break the build in some configurations (it's a hard driver to build properly, none of the normal automated testing catches it.) All of these have been in linux-next for a while with no reported issues" * tag 'staging-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (256 commits) Revert "staging: octeon: remove typedef in enum cvmx_spi_mode_t" Revert "staging: octeon: remove typedef in enum cvmx_helper_interface_mode_t" Revert "staging: octeon: remove typedef in enum cvmx_pow_wait_t" Revert "staging: octeon: remove typedef in struct cvmx_pko_lock_t" Revert "staging: octeon: remove typedef in enum cvmx_pko_status_t" Revert "staging: octeon: remove typedef in structs cvmx_pip_port_status_t and cvmx_pko_port_status_t" staging: vt6655: Type encoding info dropped from variable name "byRxRate" staging: vt6655: Type encoding info dropped from function name "CARDbUpdateTSF" staging: vt6655: Type encoding info dropped from function name "CARDvSetRSPINF" staging: vt6655: Type encoding info dropped from function name "CARDbyGetPktType" staging: vt6655: Type encoding info dropped from variable name "byPacketType" staging: vt6655: Type encoding info dropped from function name "CARDbSetPhyParameter" staging: vt6655: Type encoding info dropped from variable name "pbyRsvTime" staging: vt6655: Type encoding info dropped from variable name "pbyTxRate" staging: vt6655: Type encoding info dropped from function name "s_vCalculateOFDMRParameter" staging: vt6655: Type encoding info dropped from array name "cwRXBCNTSFOff" staging: fbtft: Convert to platform remove callback returning void staging: olpc_dcon: Remove I2C_CLASS_DDC support staging: vc04_services: use snprintf instead of sprintf staging: rtl8192e: Fix line break issue at priv->rx_buf[priv->rx_idx] ... |
||
Linus Torvalds
|
b06f58ad8e |
Driver core changes for 6.7-rc1
Here is the set of driver core updates for 6.7-rc1. Nothing major in here at all, just a small number of changes including: - minor cleanups and updates from Andy Shevchenko - __counted_by addition - firmware_loader update for aborting loads cleaner - other minor changes, details in the shortlog - documentation update All of these have been in linux-next for a while with no reported issues. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZUTe8A8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+ynP0QCfT2jQx3OcL22MoqCvdTuZJKPiHSIAoMxrliJF d4cUeICW17ywlTFzsKg8 =nTeu -----END PGP SIGNATURE----- Merge tag 'driver-core-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg KH: "Here is the set of driver core updates for 6.7-rc1. Nothing major in here at all, just a small number of changes including: - minor cleanups and updates from Andy Shevchenko - __counted_by addition - firmware_loader update for aborting loads cleaner - other minor changes, details in the shortlog - documentation update All of these have been in linux-next for a while with no reported issues" * tag 'driver-core-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (21 commits) firmware_loader: Abort all upcoming firmware load request once reboot triggered firmware_loader: Refactor kill_pending_fw_fallback_reqs() Documentation: security-bugs.rst: linux-distros relaxed their rules driver core: Release all resources during unbind before updating device links driver core: class: remove boilerplate code driver core: platform: Annotate struct irq_affinity_devres with __counted_by resource: Constify resource crosscheck APIs resource: Unify next_resource() and next_resource_skip_children() resource: Reuse for_each_resource() macro PCI: Implement custom llseek for sysfs resource entries kernfs: sysfs: support custom llseek method for sysfs entries debugfs: Fix __rcu type comparison warning device property: Replace custom implementation of COUNT_ARGS() drivers: base: test: Make property entry API test modular driver core: Add missing parameter description to __fwnode_link_add() device property: Clarify usage scope of some struct fwnode_handle members devres: rename the first parameter of devm_add_action(_or_reset) driver core: platform: Unify the firmware node type check driver core: platform: Use temporary variable in platform_device_add() driver core: platform: Refactor error path in a couple places ... |
||
Linus Torvalds
|
d99b91a99b |
Char/Misc and other driver changes for 6.7-rc1
Here is the big set of char/misc and other small driver subsystem changes for 6.7-rc1. Included in here are: - IIO subsystem driver updates and additions (largest part of this pull request) - FPGA subsystem driver updates - Counter subsystem driver updates - ICC subsystem driver updates - extcon subsystem driver updates - mei driver updates and additions - nvmem subsystem driver updates and additions - comedi subsystem dependency fixes - parport driver fixups - cdx subsystem driver and core updates - splice support for /dev/zero and /dev/full - other smaller driver cleanups All of these have been in linux-next for a while with no reported issues. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZUTSzg8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+ylH3QCfbZuG8MiglEZUd4slRLUNqcRQ5tQAn1yKpDFo l3KLkxo1UTLMXbJBWe+b =gafK -----END PGP SIGNATURE----- Merge tag 'char-misc-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc updates from Greg KH: "Here is the big set of char/misc and other small driver subsystem changes for 6.7-rc1. Included in here are: - IIO subsystem driver updates and additions (largest part of this pull request) - FPGA subsystem driver updates - Counter subsystem driver updates - ICC subsystem driver updates - extcon subsystem driver updates - mei driver updates and additions - nvmem subsystem driver updates and additions - comedi subsystem dependency fixes - parport driver fixups - cdx subsystem driver and core updates - splice support for /dev/zero and /dev/full - other smaller driver cleanups All of these have been in linux-next for a while with no reported issues" * tag 'char-misc-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (326 commits) cdx: add sysfs for subsystem, class and revision cdx: add sysfs for bus reset cdx: add support for bus enable and disable cdx: Register cdx bus as a device on cdx subsystem cdx: Create symbol namespaces for cdx subsystem cdx: Introduce lock to protect controller ops cdx: Remove cdx controller list from cdx bus system dts: ti: k3-am625-beagleplay: Add beaglecc1352 greybus: Add BeaglePlay Linux Driver dt-bindings: net: Add ti,cc1352p7 dt-bindings: eeprom: at24: allow NVMEM cells based on old syntax dt-bindings: nvmem: SID: allow NVMEM cells based on old syntax Revert "nvmem: add new config option" MAINTAINERS: coresight: Add missing Coresight files misc: pci_endpoint_test: Add deviceID for J721S2 PCIe EP device support firmware: xilinx: Move EXPORT_SYMBOL_GPL next to zynqmp_pm_feature definition uacce: make uacce_class constant ocxl: make ocxl_class constant cxl: make cxl_class constant misc: phantom: make phantom_class constant ... |
||
Linus Torvalds
|
707df298cb |
powerpc updates for 6.7
- Add support for KVM running as a nested hypervisor under development versions of PowerVM, using the new PAPR nested virtualisation API. - Add support for the BPF prog pack allocator. - A rework of the non-server MMU handling to support execute-only on all platforms. - Some optimisations & cleanups for the powerpc qspinlock code. - Various other small features and fixes. Thanks to: Aboorva Devarajan, Aditya Gupta, Amit Machhiwal, Benjamin Gray, Christophe Leroy, Dr. David Alan Gilbert, Gaurav Batra, Gautam Menghani, Geert Uytterhoeven, Haren Myneni, Hari Bathini, Joel Stanley, Jordan Niethe, Julia Lawall, Kautuk Consul, Kuan-Wei Chiu, Michael Neuling, Minjie Du, Muhammad Muzammil, Naveen N Rao, Nicholas Piggin, Nick Child, Nysal Jan K.A, Peter Lafreniere, Rob Herring, Sachin Sant, Sebastian Andrzej Siewior, Shrikanth Hegde, Srikar Dronamraju, Stanislav Kinsburskii, Vaibhav Jain, Wang Yufen, Yang Yingliang, Yuan Tan. -----BEGIN PGP SIGNATURE----- iQJHBAABCAAxFiEEJFGtCPCthwEv2Y/bUevqPMjhpYAFAmVEf38THG1wZUBlbGxl cm1hbi5pZC5hdQAKCRBR6+o8yOGlgMKgD/4vmPVcBE31xCAuuksrVvmMDRsCoC8N IJe4A5dHda1tYgdN2YdeK4LBszv5pWICjf2xZHlNh+L0s3Vxpngd4ycAWGPfDAyk SOlM24NCKl5j3327QZEt+iZVmJeTSnrmjxO0A1y04yvzLrfvFT7mbP4EXoidjShd GNb/EoH9kkCFn65zulc+lN2itQEX6Ht2GQTAz5z5GKtF6d1zZGM8ftOW+SQ5LeU3 5JOkQtMtwAKhzBiglA4BB3pQyjaOOkPaTaj/WLoxx5tbVaCkV4wrFq48Bmtbm7E3 kYkMNoI3IsC615GqY1CaRs/RSpMt74tIVh3tstSecHWRIwNGnfF6zeZpKLvJSs8k Qa5greGWMUDuJdDg9oDwAX2AKtO+3byI2v1hKE+sMhMh0eeMtDP9WIrIRg4BDjKL mq8RffXLTCtepehgfwBpoZbcvFSwFUMwuihBD7+bDMZQeDbtuFdZ2ouMFXBP9M1n cuv4KySouvKv9Xp5EeCkHlpL7QmSqrtSHOPYjoPeLueJYlmjheWdreLM9p7Nl2ma 5wBxLpdLCGCpDJOyGgWNoQRHXucBNlU97DLx2V70nXG4wvvRyXh9EZ6I2niPSdPx N3LJnINz4MJ52Gd1KWJvufOyJlLwXxuI07rzCq67ZegpEPh+baWqVcPscuKU8+q0 dSh2DPCht8gw1A== =ddT4 -----END PGP SIGNATURE----- Merge tag 'powerpc-6.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc updates from Michael Ellerman: - Add support for KVM running as a nested hypervisor under development versions of PowerVM, using the new PAPR nested virtualisation API - Add support for the BPF prog pack allocator - A rework of the non-server MMU handling to support execute-only on all platforms - Some optimisations & cleanups for the powerpc qspinlock code - Various other small features and fixes Thanks to Aboorva Devarajan, Aditya Gupta, Amit Machhiwal, Benjamin Gray, Christophe Leroy, Dr. David Alan Gilbert, Gaurav Batra, Gautam Menghani, Geert Uytterhoeven, Haren Myneni, Hari Bathini, Joel Stanley, Jordan Niethe, Julia Lawall, Kautuk Consul, Kuan-Wei Chiu, Michael Neuling, Minjie Du, Muhammad Muzammil, Naveen N Rao, Nicholas Piggin, Nick Child, Nysal Jan K.A, Peter Lafreniere, Rob Herring, Sachin Sant, Sebastian Andrzej Siewior, Shrikanth Hegde, Srikar Dronamraju, Stanislav Kinsburskii, Vaibhav Jain, Wang Yufen, Yang Yingliang, and Yuan Tan. * tag 'powerpc-6.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (100 commits) powerpc/vmcore: Add MMU information to vmcoreinfo Revert "powerpc: add `cur_cpu_spec` symbol to vmcoreinfo" powerpc/bpf: use bpf_jit_binary_pack_[alloc|finalize|free] powerpc/bpf: rename powerpc64_jit_data to powerpc_jit_data powerpc/bpf: implement bpf_arch_text_invalidate for bpf_prog_pack powerpc/bpf: implement bpf_arch_text_copy powerpc/code-patching: introduce patch_instructions() powerpc/32s: Implement local_flush_tlb_page_psize() powerpc/pseries: use kfree_sensitive() in plpks_gen_password() powerpc/code-patching: Perform hwsync in __patch_instruction() in case of failure powerpc/fsl_msi: Use device_get_match_data() powerpc: Remove cpm_dp...() macros powerpc/qspinlock: Rename yield_propagate_owner tunable powerpc/qspinlock: Propagate sleepy if previous waiter is preempted powerpc/qspinlock: don't propagate the not-sleepy state powerpc/qspinlock: propagate owner preemptedness rather than CPU number powerpc/qspinlock: stop queued waiters trying to set lock sleepy powerpc/perf: Fix disabling BHRB and instruction sampling powerpc/trace: Add support for HAVE_FUNCTION_ARG_ACCESS_API powerpc/tools: Pass -mabi=elfv2 to gcc-check-mprofile-kernel.sh ... |
||
Linus Torvalds
|
136cc1e1f5 |
Landlock updates for v6.7-rc1
-----BEGIN PGP SIGNATURE----- iIYEABYIAC4WIQSVyBthFV4iTW/VU1/l49DojIL20gUCZUOZKRAcbWljQGRpZ2lr b2QubmV0AAoJEOXj0OiMgvbSoaIBAMHG8wxzRcTMplddgQHXmbWPByFIjhA0hqqp +hEgLFfyAQCqLPi4fW49CokrkynATKXTLMIBfZ37EYZ3llJgveHTDw== =rPTd -----END PGP SIGNATURE----- Merge tag 'landlock-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux Pull landlock updates from Mickaël Salaün: "A Landlock ruleset can now handle two new access rights: LANDLOCK_ACCESS_NET_BIND_TCP and LANDLOCK_ACCESS_NET_CONNECT_TCP. When handled, the related actions are denied unless explicitly allowed by a Landlock network rule for a specific port. The related patch series has been reviewed for almost two years, it has evolved a lot and we now have reached a decent design, code and testing. The refactored kernel code and the new test helpers also bring the foundation to support more network protocols. Test coverage for security/landlock is 92.4% of 710 lines according to gcc/gcov-13, and it was 93.1% of 597 lines before this series. The decrease in coverage is due to code refactoring to make the ruleset management more generic (i.e. dealing with inodes and ports) that also added new WARN_ON_ONCE() checks not possible to test from user space. syzkaller has been updated accordingly [4], and such patched instance (tailored to Landlock) has been running for a month, covering all the new network-related code [5]" Link: https://lore.kernel.org/r/20231026014751.414649-1-konstantin.meskhidze@huawei.com [1] Link: https://lore.kernel.org/r/CAHC9VhS1wwgH6NNd+cJz4MYogPiRV8NyPDd1yj5SpaxeUB4UVg@mail.gmail.com [2] Link: https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next-history.git/commit/?id=c8dc5ee69d3a [3] Link: https://github.com/google/syzkaller/pull/4266 [4] Link: https://storage.googleapis.com/syzbot-assets/82e8608dec36/ci-upstream-linux-next-kasan-gce-root-ab577164.html#security%2flandlock%2fnet.c [5] * tag 'landlock-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux: selftests/landlock: Add tests for FS topology changes with network rules landlock: Document network support samples/landlock: Support TCP restrictions selftests/landlock: Add network tests selftests/landlock: Share enforce_ruleset() helper landlock: Support network rules with TCP bind and connect landlock: Refactor landlock_add_rule() syscall landlock: Refactor layer helpers landlock: Move and rename layer helpers landlock: Refactor merge/inherit_ruleset helpers landlock: Refactor landlock_find_rule/insert_rule helpers landlock: Allow FS topology changes for domains without such rule type landlock: Make ruleset's access masks more generic |
||
Linus Torvalds
|
31e5f934ff |
Tracing updates for v6.7:
- Remove eventfs_file descriptor This is the biggest change, and the second part of making eventfs create its files dynamically. In 6.6 the first part was added, and that maintained a one to one mapping between eventfs meta descriptors and the directories and file inodes and dentries that were dynamically created. The directories were represented by a eventfs_inode and the files were represented by a eventfs_file. In v6.7 the eventfs_file is removed. As all events have the same directory make up (sched_switch has an "enable", "id", "format", etc files), the handing of what files are underneath each leaf eventfs directory is moved back to the tracing subsystem via a callback. When a event is added to the eventfs, it registers an array of evenfs_entry's. These hold the names of the files and the callbacks to call when the file is referenced. The callback gets the name so that the same callback may be used by multiple files. The callback then supplies the filesystem_operations structure needed to create this file. This has brought the memory footprint of creating multiple eventfs instances down by 2 megs each! - User events now has persistent events that are not associated to a single processes. These are privileged events that hang around even if no process is attached to them. - Clean up of seq_buf. There's talk about using seq_buf more to replace strscpy() and friends. But this also requires some minor modifications of seq_buf to be able to do this. - Expand instance ring buffers individually Currently if boot up creates an instance, and a trace event is enabled on that instance, the ring buffer for that instance and the top level ring buffer are expanded (1.4 MB per CPU). This wastes memory as this happens when nothing is using the top level instance. - Other minor clean ups and fixes. -----BEGIN PGP SIGNATURE----- iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZUMrBBQccm9zdGVkdEBn b29kbWlzLm9yZwAKCRAp5XQQmuv6quzVAQCed/kPM7X9j2QZamJVDruMf2CmVxpu /TOvKvSKV584GgEAxLntf5VKx1Q98bc68y3Zkg+OCi8jSgORos1ROmURhws= =iIgb -----END PGP SIGNATURE----- Merge tag 'trace-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace Pull tracing updates from Steven Rostedt: - Remove eventfs_file descriptor This is the biggest change, and the second part of making eventfs create its files dynamically. In 6.6 the first part was added, and that maintained a one to one mapping between eventfs meta descriptors and the directories and file inodes and dentries that were dynamically created. The directories were represented by a eventfs_inode and the files were represented by a eventfs_file. In v6.7 the eventfs_file is removed. As all events have the same directory make up (sched_switch has an "enable", "id", "format", etc files), the handing of what files are underneath each leaf eventfs directory is moved back to the tracing subsystem via a callback. When an event is added to the eventfs, it registers an array of evenfs_entry's. These hold the names of the files and the callbacks to call when the file is referenced. The callback gets the name so that the same callback may be used by multiple files. The callback then supplies the filesystem_operations structure needed to create this file. This has brought the memory footprint of creating multiple eventfs instances down by 2 megs each! - User events now has persistent events that are not associated to a single processes. These are privileged events that hang around even if no process is attached to them - Clean up of seq_buf There's talk about using seq_buf more to replace strscpy() and friends. But this also requires some minor modifications of seq_buf to be able to do this - Expand instance ring buffers individually Currently if boot up creates an instance, and a trace event is enabled on that instance, the ring buffer for that instance and the top level ring buffer are expanded (1.4 MB per CPU). This wastes memory as this happens when nothing is using the top level instance - Other minor clean ups and fixes * tag 'trace-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (34 commits) seq_buf: Export seq_buf_puts() seq_buf: Export seq_buf_putc() eventfs: Use simple_recursive_removal() to clean up dentries eventfs: Remove special processing of dput() of events directory eventfs: Delete eventfs_inode when the last dentry is freed eventfs: Hold eventfs_mutex when calling callback functions eventfs: Save ownership and mode eventfs: Test for ei->is_freed when accessing ei->dentry eventfs: Have a free_ei() that just frees the eventfs_inode eventfs: Remove "is_freed" union with rcu head eventfs: Fix kerneldoc of eventfs_remove_rec() tracing: Have the user copy of synthetic event address use correct context eventfs: Remove extra dget() in eventfs_create_events_dir() tracing: Have trace_event_file have ref counters seq_buf: Introduce DECLARE_SEQ_BUF and seq_buf_str() eventfs: Fix typo in eventfs_inode union comment eventfs: Fix WARN_ON() in create_file_dentry() powerpc: Remove initialisation of readpos tracing/histograms: Simplify last_cmd_set() seq_buf: fix a misleading comment ... |
||
Linus Torvalds
|
ecae0bd517 |
Many singleton patches against the MM code. The patch series which are
included in this merge do the following: - Kemeng Shi has contributed some compation maintenance work in the series "Fixes and cleanups to compaction". - Joel Fernandes has a patchset ("Optimize mremap during mutual alignment within PMD") which fixes an obscure issue with mremap()'s pagetable handling during a subsequent exec(), based upon an implementation which Linus suggested. - More DAMON/DAMOS maintenance and feature work from SeongJae Park i the following patch series: mm/damon: misc fixups for documents, comments and its tracepoint mm/damon: add a tracepoint for damos apply target regions mm/damon: provide pseudo-moving sum based access rate mm/damon: implement DAMOS apply intervals mm/damon/core-test: Fix memory leaks in core-test mm/damon/sysfs-schemes: Do DAMOS tried regions update for only one apply interval - In the series "Do not try to access unaccepted memory" Adrian Hunter provides some fixups for the recently-added "unaccepted memory' feature. To increase the feature's checking coverage. "Plug a few gaps where RAM is exposed without checking if it is unaccepted memory". - In the series "cleanups for lockless slab shrink" Qi Zheng has done some maintenance work which is preparation for the lockless slab shrinking code. - Qi Zheng has redone the earlier (and reverted) attempt to make slab shrinking lockless in the series "use refcount+RCU method to implement lockless slab shrink". - David Hildenbrand contributes some maintenance work for the rmap code in the series "Anon rmap cleanups". - Kefeng Wang does more folio conversions and some maintenance work in the migration code. Series "mm: migrate: more folio conversion and unification". - Matthew Wilcox has fixed an issue in the buffer_head code which was causing long stalls under some heavy memory/IO loads. Some cleanups were added on the way. Series "Add and use bdev_getblk()". - In the series "Use nth_page() in place of direct struct page manipulation" Zi Yan has fixed a potential issue with the direct manipulation of hugetlb page frames. - In the series "mm: hugetlb: Skip initialization of gigantic tail struct pages if freed by HVO" has improved our handling of gigantic pages in the hugetlb vmmemmep optimizaton code. This provides significant boot time improvements when significant amounts of gigantic pages are in use. - Matthew Wilcox has sent the series "Small hugetlb cleanups" - code rationalization and folio conversions in the hugetlb code. - Yin Fengwei has improved mlock()'s handling of large folios in the series "support large folio for mlock" - In the series "Expose swapcache stat for memcg v1" Liu Shixin has added statistics for memcg v1 users which are available (and useful) under memcg v2. - Florent Revest has enhanced the MDWE (Memory-Deny-Write-Executable) prctl so that userspace may direct the kernel to not automatically propagate the denial to child processes. The series is named "MDWE without inheritance". - Kefeng Wang has provided the series "mm: convert numa balancing functions to use a folio" which does what it says. - In the series "mm/ksm: add fork-exec support for prctl" Stefan Roesch makes is possible for a process to propagate KSM treatment across exec(). - Huang Ying has enhanced memory tiering's calculation of memory distances. This is used to permit the dax/kmem driver to use "high bandwidth memory" in addition to Optane Data Center Persistent Memory Modules (DCPMM). The series is named "memory tiering: calculate abstract distance based on ACPI HMAT" - In the series "Smart scanning mode for KSM" Stefan Roesch has optimized KSM by teaching it to retain and use some historical information from previous scans. - Yosry Ahmed has fixed some inconsistencies in memcg statistics in the series "mm: memcg: fix tracking of pending stats updates values". - In the series "Implement IOCTL to get and optionally clear info about PTEs" Peter Xu has added an ioctl to /proc/<pid>/pagemap which permits us to atomically read-then-clear page softdirty state. This is mainly used by CRIU. - Hugh Dickins contributed the series "shmem,tmpfs: general maintenance" - a bunch of relatively minor maintenance tweaks to this code. - Matthew Wilcox has increased the use of the VMA lock over file-backed page faults in the series "Handle more faults under the VMA lock". Some rationalizations of the fault path became possible as a result. - In the series "mm/rmap: convert page_move_anon_rmap() to folio_move_anon_rmap()" David Hildenbrand has implemented some cleanups and folio conversions. - In the series "various improvements to the GUP interface" Lorenzo Stoakes has simplified and improved the GUP interface with an eye to providing groundwork for future improvements. - Andrey Konovalov has sent along the series "kasan: assorted fixes and improvements" which does those things. - Some page allocator maintenance work from Kemeng Shi in the series "Two minor cleanups to break_down_buddy_pages". - In thes series "New selftest for mm" Breno Leitao has developed another MM self test which tickles a race we had between madvise() and page faults. - In the series "Add folio_end_read" Matthew Wilcox provides cleanups and an optimization to the core pagecache code. - Nhat Pham has added memcg accounting for hugetlb memory in the series "hugetlb memcg accounting". - Cleanups and rationalizations to the pagemap code from Lorenzo Stoakes, in the series "Abstract vma_merge() and split_vma()". - Audra Mitchell has fixed issues in the procfs page_owner code's new timestamping feature which was causing some misbehaviours. In the series "Fix page_owner's use of free timestamps". - Lorenzo Stoakes has fixed the handling of new mappings of sealed files in the series "permit write-sealed memfd read-only shared mappings". - Mike Kravetz has optimized the hugetlb vmemmap optimization in the series "Batch hugetlb vmemmap modification operations". - Some buffer_head folio conversions and cleanups from Matthew Wilcox in the series "Finish the create_empty_buffers() transition". - As a page allocator performance optimization Huang Ying has added automatic tuning to the allocator's per-cpu-pages feature, in the series "mm: PCP high auto-tuning". - Roman Gushchin has contributed the patchset "mm: improve performance of accounted kernel memory allocations" which improves their performance by ~30% as measured by a micro-benchmark. - folio conversions from Kefeng Wang in the series "mm: convert page cpupid functions to folios". - Some kmemleak fixups in Liu Shixin's series "Some bugfix about kmemleak". - Qi Zheng has improved our handling of memoryless nodes by keeping them off the allocation fallback list. This is done in the series "handle memoryless nodes more appropriately". - khugepaged conversions from Vishal Moola in the series "Some khugepaged folio conversions". -----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZULEMwAKCRDdBJ7gKXxA jhQHAQCYpD3g849x69DmHnHWHm/EHQLvQmRMDeYZI+nx/sCJOwEAw4AKg0Oemv9y FgeUPAD1oasg6CP+INZvCj34waNxwAc= =E+Y4 -----END PGP SIGNATURE----- Merge tag 'mm-stable-2023-11-01-14-33' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull MM updates from Andrew Morton: "Many singleton patches against the MM code. The patch series which are included in this merge do the following: - Kemeng Shi has contributed some compation maintenance work in the series 'Fixes and cleanups to compaction' - Joel Fernandes has a patchset ('Optimize mremap during mutual alignment within PMD') which fixes an obscure issue with mremap()'s pagetable handling during a subsequent exec(), based upon an implementation which Linus suggested - More DAMON/DAMOS maintenance and feature work from SeongJae Park i the following patch series: mm/damon: misc fixups for documents, comments and its tracepoint mm/damon: add a tracepoint for damos apply target regions mm/damon: provide pseudo-moving sum based access rate mm/damon: implement DAMOS apply intervals mm/damon/core-test: Fix memory leaks in core-test mm/damon/sysfs-schemes: Do DAMOS tried regions update for only one apply interval - In the series 'Do not try to access unaccepted memory' Adrian Hunter provides some fixups for the recently-added 'unaccepted memory' feature. To increase the feature's checking coverage. 'Plug a few gaps where RAM is exposed without checking if it is unaccepted memory' - In the series 'cleanups for lockless slab shrink' Qi Zheng has done some maintenance work which is preparation for the lockless slab shrinking code - Qi Zheng has redone the earlier (and reverted) attempt to make slab shrinking lockless in the series 'use refcount+RCU method to implement lockless slab shrink' - David Hildenbrand contributes some maintenance work for the rmap code in the series 'Anon rmap cleanups' - Kefeng Wang does more folio conversions and some maintenance work in the migration code. Series 'mm: migrate: more folio conversion and unification' - Matthew Wilcox has fixed an issue in the buffer_head code which was causing long stalls under some heavy memory/IO loads. Some cleanups were added on the way. Series 'Add and use bdev_getblk()' - In the series 'Use nth_page() in place of direct struct page manipulation' Zi Yan has fixed a potential issue with the direct manipulation of hugetlb page frames - In the series 'mm: hugetlb: Skip initialization of gigantic tail struct pages if freed by HVO' has improved our handling of gigantic pages in the hugetlb vmmemmep optimizaton code. This provides significant boot time improvements when significant amounts of gigantic pages are in use - Matthew Wilcox has sent the series 'Small hugetlb cleanups' - code rationalization and folio conversions in the hugetlb code - Yin Fengwei has improved mlock()'s handling of large folios in the series 'support large folio for mlock' - In the series 'Expose swapcache stat for memcg v1' Liu Shixin has added statistics for memcg v1 users which are available (and useful) under memcg v2 - Florent Revest has enhanced the MDWE (Memory-Deny-Write-Executable) prctl so that userspace may direct the kernel to not automatically propagate the denial to child processes. The series is named 'MDWE without inheritance' - Kefeng Wang has provided the series 'mm: convert numa balancing functions to use a folio' which does what it says - In the series 'mm/ksm: add fork-exec support for prctl' Stefan Roesch makes is possible for a process to propagate KSM treatment across exec() - Huang Ying has enhanced memory tiering's calculation of memory distances. This is used to permit the dax/kmem driver to use 'high bandwidth memory' in addition to Optane Data Center Persistent Memory Modules (DCPMM). The series is named 'memory tiering: calculate abstract distance based on ACPI HMAT' - In the series 'Smart scanning mode for KSM' Stefan Roesch has optimized KSM by teaching it to retain and use some historical information from previous scans - Yosry Ahmed has fixed some inconsistencies in memcg statistics in the series 'mm: memcg: fix tracking of pending stats updates values' - In the series 'Implement IOCTL to get and optionally clear info about PTEs' Peter Xu has added an ioctl to /proc/<pid>/pagemap which permits us to atomically read-then-clear page softdirty state. This is mainly used by CRIU - Hugh Dickins contributed the series 'shmem,tmpfs: general maintenance', a bunch of relatively minor maintenance tweaks to this code - Matthew Wilcox has increased the use of the VMA lock over file-backed page faults in the series 'Handle more faults under the VMA lock'. Some rationalizations of the fault path became possible as a result - In the series 'mm/rmap: convert page_move_anon_rmap() to folio_move_anon_rmap()' David Hildenbrand has implemented some cleanups and folio conversions - In the series 'various improvements to the GUP interface' Lorenzo Stoakes has simplified and improved the GUP interface with an eye to providing groundwork for future improvements - Andrey Konovalov has sent along the series 'kasan: assorted fixes and improvements' which does those things - Some page allocator maintenance work from Kemeng Shi in the series 'Two minor cleanups to break_down_buddy_pages' - In thes series 'New selftest for mm' Breno Leitao has developed another MM self test which tickles a race we had between madvise() and page faults - In the series 'Add folio_end_read' Matthew Wilcox provides cleanups and an optimization to the core pagecache code - Nhat Pham has added memcg accounting for hugetlb memory in the series 'hugetlb memcg accounting' - Cleanups and rationalizations to the pagemap code from Lorenzo Stoakes, in the series 'Abstract vma_merge() and split_vma()' - Audra Mitchell has fixed issues in the procfs page_owner code's new timestamping feature which was causing some misbehaviours. In the series 'Fix page_owner's use of free timestamps' - Lorenzo Stoakes has fixed the handling of new mappings of sealed files in the series 'permit write-sealed memfd read-only shared mappings' - Mike Kravetz has optimized the hugetlb vmemmap optimization in the series 'Batch hugetlb vmemmap modification operations' - Some buffer_head folio conversions and cleanups from Matthew Wilcox in the series 'Finish the create_empty_buffers() transition' - As a page allocator performance optimization Huang Ying has added automatic tuning to the allocator's per-cpu-pages feature, in the series 'mm: PCP high auto-tuning' - Roman Gushchin has contributed the patchset 'mm: improve performance of accounted kernel memory allocations' which improves their performance by ~30% as measured by a micro-benchmark - folio conversions from Kefeng Wang in the series 'mm: convert page cpupid functions to folios' - Some kmemleak fixups in Liu Shixin's series 'Some bugfix about kmemleak' - Qi Zheng has improved our handling of memoryless nodes by keeping them off the allocation fallback list. This is done in the series 'handle memoryless nodes more appropriately' - khugepaged conversions from Vishal Moola in the series 'Some khugepaged folio conversions'" [ bcachefs conflicts with the dynamically allocated shrinkers have been resolved as per Stephen Rothwell in https://lore.kernel.org/all/20230913093553.4290421e@canb.auug.org.au/ with help from Qi Zheng. The clone3 test filtering conflict was half-arsed by yours truly ] * tag 'mm-stable-2023-11-01-14-33' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (406 commits) mm/damon/sysfs: update monitoring target regions for online input commit mm/damon/sysfs: remove requested targets when online-commit inputs selftests: add a sanity check for zswap Documentation: maple_tree: fix word spelling error mm/vmalloc: fix the unchecked dereference warning in vread_iter() zswap: export compression failure stats Documentation: ubsan: drop "the" from article title mempolicy: migration attempt to match interleave nodes mempolicy: mmap_lock is not needed while migrating folios mempolicy: alloc_pages_mpol() for NUMA policy without vma mm: add page_rmappable_folio() wrapper mempolicy: remove confusing MPOL_MF_LAZY dead code mempolicy: mpol_shared_policy_init() without pseudo-vma mempolicy trivia: use pgoff_t in shared mempolicy tree mempolicy trivia: slightly more consistent naming mempolicy trivia: delete those ancient pr_debug()s mempolicy: fix migrate_pages(2) syscall return nr_failed kernfs: drop shared NUMA mempolicy hooks hugetlbfs: drop shared NUMA mempolicy pretence mm/damon/sysfs-test: add a unit test for damon_sysfs_set_targets() ... |
||
Linus Torvalds
|
bc3012f4e3 |
This update includes the following changes:
API: - Add virtual-address based lskcipher interface. - Optimise ahash/shash performance in light of costly indirect calls. - Remove ahash alignmask attribute. Algorithms: - Improve AES/XTS performance of 6-way unrolling for ppc. - Remove some uses of obsolete algorithms (md4, md5, sha1). - Add FIPS 202 SHA-3 support in pkcs1pad. - Add fast path for single-page messages in adiantum. - Remove zlib-deflate. Drivers: - Add support for S4 in meson RNG driver. - Add STM32MP13x support in stm32. - Add hwrng interface support in qcom-rng. - Add support for deflate algorithm in hisilicon/zip. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEn51F/lCuNhUwmDeSxycdCkmxi6cFAmVB3vgACgkQxycdCkmx i6dsOBAAykbnX8BpnpnOXYywE9ZWrl98rAk51MK0N9olZNfg78zRPIv7fFxFdC20 SDJrDSNPmn0Qvaa5e0EfoAdklsm0k2GkXL/BwPKMKWUsyIoJVYI3WrBMnjBy9xMp yfME+h0bKoXJCZKnYkIUSGUejmUPSyRlEylrXoFlH/VWYwAaii/x9zwreQoF+0LR KI24A1q8AYs6Dw9HSfndaAub9GOzrqKYs6fSaMG+77Y4UC5aoi5J9Bp2G3uVyHay x/0bZtIxKXS9wn+LeG/3GspX23x/I5VwBOdAoMigrYmAIaIg5qgyMszudltTAs4R zF1Kh7WsnM5+vpnBSeigzo+/GGOU3QTz8y3tBTg+3ZR7GWGOwQLiizhOYqCyOfAH pIm6c++sZw/OOHiL69Nt4HeLKzGNYYWk3s4X/B/6cqoouPfOsfBaQobZNx9zfy7q ZNEvSVBjrFX/L6wDSotny1LTWLUNjHbmLaMV5uQZ/SQKEtv19fp2Dl7SsLkHH+3v ldOAwfoJR6QcSwz3Ez02TUAvQhtP172Hnxi7u44eiZu2aUboLhCFr7aEU6kVdBCx 1rIRVHD1oqlOEDRwPRXzhF3I8R4QDORJIxZ6UUhg7yueuI+XCGDsBNC+LqBrBmSR IbdjqmSDUBhJyM5yMnt1VFYhqKQ/ZzwZ3JQviwW76Es9pwEIolM= =IZmR -----END PGP SIGNATURE----- Merge tag 'v6.7-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto updates from Herbert Xu: "API: - Add virtual-address based lskcipher interface - Optimise ahash/shash performance in light of costly indirect calls - Remove ahash alignmask attribute Algorithms: - Improve AES/XTS performance of 6-way unrolling for ppc - Remove some uses of obsolete algorithms (md4, md5, sha1) - Add FIPS 202 SHA-3 support in pkcs1pad - Add fast path for single-page messages in adiantum - Remove zlib-deflate Drivers: - Add support for S4 in meson RNG driver - Add STM32MP13x support in stm32 - Add hwrng interface support in qcom-rng - Add support for deflate algorithm in hisilicon/zip" * tag 'v6.7-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (283 commits) crypto: adiantum - flush destination page before unmapping crypto: testmgr - move pkcs1pad(rsa,sha3-*) to correct place Documentation/module-signing.txt: bring up to date module: enable automatic module signing with FIPS 202 SHA-3 crypto: asymmetric_keys - allow FIPS 202 SHA-3 signatures crypto: rsa-pkcs1pad - Add FIPS 202 SHA-3 support crypto: FIPS 202 SHA-3 register in hash info for IMA x509: Add OIDs for FIPS 202 SHA-3 hash and signatures crypto: ahash - optimize performance when wrapping shash crypto: ahash - check for shash type instead of not ahash type crypto: hash - move "ahash wrapping shash" functions to ahash.c crypto: talitos - stop using crypto_ahash::init crypto: chelsio - stop using crypto_ahash::init crypto: ahash - improve file comment crypto: ahash - remove struct ahash_request_priv crypto: ahash - remove crypto_ahash_alignmask crypto: gcm - stop using alignmask of ahash crypto: chacha20poly1305 - stop using alignmask of ahash crypto: ccm - stop using alignmask of ahash net: ipv6: stop checking crypto_ahash_alignmask ... |
||
Linus Torvalds
|
6803bd7956 |
ARM:
* Generalized infrastructure for 'writable' ID registers, effectively allowing userspace to opt-out of certain vCPU features for its guest * Optimization for vSGI injection, opportunistically compressing MPIDR to vCPU mapping into a table * Improvements to KVM's PMU emulation, allowing userspace to select the number of PMCs available to a VM * Guest support for memory operation instructions (FEAT_MOPS) * Cleanups to handling feature flags in KVM_ARM_VCPU_INIT, squashing bugs and getting rid of useless code * Changes to the way the SMCCC filter is constructed, avoiding wasted memory allocations when not in use * Load the stage-2 MMU context at vcpu_load() for VHE systems, reducing the overhead of errata mitigations * Miscellaneous kernel and selftest fixes LoongArch: * New architecture. The hardware uses the same model as x86, s390 and RISC-V, where guest/host mode is orthogonal to supervisor/user mode. The virtualization extensions are very similar to MIPS, therefore the code also has some similarities but it's been cleaned up to avoid some of the historical bogosities that are found in arch/mips. The kernel emulates MMU, timer and CSR accesses, while interrupt controllers are only emulated in userspace, at least for now. RISC-V: * Support for the Smstateen and Zicond extensions * Support for virtualizing senvcfg * Support for virtualized SBI debug console (DBCN) S390: * Nested page table management can be monitored through tracepoints and statistics x86: * Fix incorrect handling of VMX posted interrupt descriptor in KVM_SET_LAPIC, which could result in a dropped timer IRQ * Avoid WARN on systems with Intel IPI virtualization * Add CONFIG_KVM_MAX_NR_VCPUS, to allow supporting up to 4096 vCPUs without forcing more common use cases to eat the extra memory overhead. * Add virtualization support for AMD SRSO mitigation (IBPB_BRTYPE and SBPB, aka Selective Branch Predictor Barrier). * Fix a bug where restoring a vCPU snapshot that was taken within 1 second of creating the original vCPU would cause KVM to try to synchronize the vCPU's TSC and thus clobber the correct TSC being set by userspace. * Compute guest wall clock using a single TSC read to avoid generating an inaccurate time, e.g. if the vCPU is preempted between multiple TSC reads. * "Virtualize" HWCR.TscFreqSel to make Linux guests happy, which complain about a "Firmware Bug" if the bit isn't set for select F/M/S combos. Likewise "virtualize" (ignore) MSR_AMD64_TW_CFG to appease Windows Server 2022. * Don't apply side effects to Hyper-V's synthetic timer on writes from userspace to fix an issue where the auto-enable behavior can trigger spurious interrupts, i.e. do auto-enabling only for guest writes. * Remove an unnecessary kick of all vCPUs when synchronizing the dirty log without PML enabled. * Advertise "support" for non-serializing FS/GS base MSR writes as appropriate. * Harden the fast page fault path to guard against encountering an invalid root when walking SPTEs. * Omit "struct kvm_vcpu_xen" entirely when CONFIG_KVM_XEN=n. * Use the fast path directly from the timer callback when delivering Xen timer events, instead of waiting for the next iteration of the run loop. This was not done so far because previously proposed code had races, but now care is taken to stop the hrtimer at critical points such as restarting the timer or saving the timer information for userspace. * Follow the lead of upstream Xen and ignore the VCPU_SSHOTTMR_future flag. * Optimize injection of PMU interrupts that are simultaneous with NMIs. * Usual handful of fixes for typos and other warts. x86 - MTRR/PAT fixes and optimizations: * Clean up code that deals with honoring guest MTRRs when the VM has non-coherent DMA and host MTRRs are ignored, i.e. EPT is enabled. * Zap EPT entries when non-coherent DMA assignment stops/start to prevent using stale entries with the wrong memtype. * Don't ignore guest PAT for CR0.CD=1 && KVM_X86_QUIRK_CD_NW_CLEARED=y. This was done as a workaround for virtual machine BIOSes that did not bother to clear CR0.CD (because ancient KVM/QEMU did not bother to set it, in turn), and there's zero reason to extend the quirk to also ignore guest PAT. x86 - SEV fixes: * Report KVM_EXIT_SHUTDOWN instead of EINVAL if KVM intercepts SHUTDOWN while running an SEV-ES guest. * Clean up the recognition of emulation failures on SEV guests, when KVM would like to "skip" the instruction but it had already been partially emulated. This makes it possible to drop a hack that second guessed the (insufficient) information provided by the emulator, and just do the right thing. Documentation: * Various updates and fixes, mostly for x86 * MTRR and PAT fixes and optimizations: -----BEGIN PGP SIGNATURE----- iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmVBZc0UHHBib256aW5p QHJlZGhhdC5jb20ACgkQv/vSX3jHroP1LQf+NgsmZ1lkGQlKdSdijoQ856w+k0or l2SV1wUwiEdFPSGK+RTUlHV5Y1ni1dn/CqCVIJZKEI3ZtZ1m9/4HKIRXvbMwFHIH hx+E4Lnf8YUjsGjKTLd531UKcpphztZavQ6pXLEwazkSkDEra+JIKtooI8uU+9/p bd/eF1V+13a8CHQf1iNztFJVxqBJbVlnPx4cZDRQQvewskIDGnVDtwbrwCUKGtzD eNSzhY7si6O2kdQNkuA8xPhg29dYX9XLaCK2K1l8xOUm8WipLdtF86GAKJ5BVuOL 6ek/2QCYjZ7a+coAZNfgSEUi8JmFHEqCo7cnKmWzPJp+2zyXsdudqAhT1g== =UIxm -----END PGP SIGNATURE----- Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm Pull kvm updates from Paolo Bonzini: "ARM: - Generalized infrastructure for 'writable' ID registers, effectively allowing userspace to opt-out of certain vCPU features for its guest - Optimization for vSGI injection, opportunistically compressing MPIDR to vCPU mapping into a table - Improvements to KVM's PMU emulation, allowing userspace to select the number of PMCs available to a VM - Guest support for memory operation instructions (FEAT_MOPS) - Cleanups to handling feature flags in KVM_ARM_VCPU_INIT, squashing bugs and getting rid of useless code - Changes to the way the SMCCC filter is constructed, avoiding wasted memory allocations when not in use - Load the stage-2 MMU context at vcpu_load() for VHE systems, reducing the overhead of errata mitigations - Miscellaneous kernel and selftest fixes LoongArch: - New architecture for kvm. The hardware uses the same model as x86, s390 and RISC-V, where guest/host mode is orthogonal to supervisor/user mode. The virtualization extensions are very similar to MIPS, therefore the code also has some similarities but it's been cleaned up to avoid some of the historical bogosities that are found in arch/mips. The kernel emulates MMU, timer and CSR accesses, while interrupt controllers are only emulated in userspace, at least for now. RISC-V: - Support for the Smstateen and Zicond extensions - Support for virtualizing senvcfg - Support for virtualized SBI debug console (DBCN) S390: - Nested page table management can be monitored through tracepoints and statistics x86: - Fix incorrect handling of VMX posted interrupt descriptor in KVM_SET_LAPIC, which could result in a dropped timer IRQ - Avoid WARN on systems with Intel IPI virtualization - Add CONFIG_KVM_MAX_NR_VCPUS, to allow supporting up to 4096 vCPUs without forcing more common use cases to eat the extra memory overhead. - Add virtualization support for AMD SRSO mitigation (IBPB_BRTYPE and SBPB, aka Selective Branch Predictor Barrier). - Fix a bug where restoring a vCPU snapshot that was taken within 1 second of creating the original vCPU would cause KVM to try to synchronize the vCPU's TSC and thus clobber the correct TSC being set by userspace. - Compute guest wall clock using a single TSC read to avoid generating an inaccurate time, e.g. if the vCPU is preempted between multiple TSC reads. - "Virtualize" HWCR.TscFreqSel to make Linux guests happy, which complain about a "Firmware Bug" if the bit isn't set for select F/M/S combos. Likewise "virtualize" (ignore) MSR_AMD64_TW_CFG to appease Windows Server 2022. - Don't apply side effects to Hyper-V's synthetic timer on writes from userspace to fix an issue where the auto-enable behavior can trigger spurious interrupts, i.e. do auto-enabling only for guest writes. - Remove an unnecessary kick of all vCPUs when synchronizing the dirty log without PML enabled. - Advertise "support" for non-serializing FS/GS base MSR writes as appropriate. - Harden the fast page fault path to guard against encountering an invalid root when walking SPTEs. - Omit "struct kvm_vcpu_xen" entirely when CONFIG_KVM_XEN=n. - Use the fast path directly from the timer callback when delivering Xen timer events, instead of waiting for the next iteration of the run loop. This was not done so far because previously proposed code had races, but now care is taken to stop the hrtimer at critical points such as restarting the timer or saving the timer information for userspace. - Follow the lead of upstream Xen and ignore the VCPU_SSHOTTMR_future flag. - Optimize injection of PMU interrupts that are simultaneous with NMIs. - Usual handful of fixes for typos and other warts. x86 - MTRR/PAT fixes and optimizations: - Clean up code that deals with honoring guest MTRRs when the VM has non-coherent DMA and host MTRRs are ignored, i.e. EPT is enabled. - Zap EPT entries when non-coherent DMA assignment stops/start to prevent using stale entries with the wrong memtype. - Don't ignore guest PAT for CR0.CD=1 && KVM_X86_QUIRK_CD_NW_CLEARED=y This was done as a workaround for virtual machine BIOSes that did not bother to clear CR0.CD (because ancient KVM/QEMU did not bother to set it, in turn), and there's zero reason to extend the quirk to also ignore guest PAT. x86 - SEV fixes: - Report KVM_EXIT_SHUTDOWN instead of EINVAL if KVM intercepts SHUTDOWN while running an SEV-ES guest. - Clean up the recognition of emulation failures on SEV guests, when KVM would like to "skip" the instruction but it had already been partially emulated. This makes it possible to drop a hack that second guessed the (insufficient) information provided by the emulator, and just do the right thing. Documentation: - Various updates and fixes, mostly for x86 - MTRR and PAT fixes and optimizations" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (164 commits) KVM: selftests: Avoid using forced target for generating arm64 headers tools headers arm64: Fix references to top srcdir in Makefile KVM: arm64: Add tracepoint for MMIO accesses where ISV==0 KVM: arm64: selftest: Perform ISB before reading PAR_EL1 KVM: arm64: selftest: Add the missing .guest_prepare() KVM: arm64: Always invalidate TLB for stage-2 permission faults KVM: x86: Service NMI requests after PMI requests in VM-Enter path KVM: arm64: Handle AArch32 SPSR_{irq,abt,und,fiq} as RAZ/WI KVM: arm64: Do not let a L1 hypervisor access the *32_EL2 sysregs KVM: arm64: Refine _EL2 system register list that require trap reinjection arm64: Add missing _EL2 encodings arm64: Add missing _EL12 encodings KVM: selftests: aarch64: vPMU test for validating user accesses KVM: selftests: aarch64: vPMU register test for unimplemented counters KVM: selftests: aarch64: vPMU register test for implemented counters KVM: selftests: aarch64: Introduce vpmu_counter_access test tools: Import arm_pmuv3.h KVM: arm64: PMU: Allow userspace to limit PMCR_EL0.N for the guest KVM: arm64: Sanitize PM{C,I}NTEN{SET,CLR}, PMOVS{SET,CLR} before first run KVM: arm64: Add {get,set}_user for PM{C,I}NTEN{SET,CLR}, PMOVS{SET,CLR} ... |
||
Linus Torvalds
|
5be9911406 |
sh updates for v6.7
- locking/atomic: sh: Use generic_cmpxchg_local for arch_cmpxchg_local() - Documentation: kernel-parameters: Add earlyprintk=bios on SH - sh: bios: Revive earlyprintk support - sh: machvec: Remove custom ioport_{un,}map() - sh: Remove superhyway bus support - sh: Remove unused SH4-202 support - sh: Remove stale microdev board -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEEYv+KdYTgKVaVRgAGdCY7N/W1+RMFAmVDaQsACgkQdCY7N/W1 +RMoghAAsOOOCSdxGFe6d7FWW+NS981NaBn/5gkJXKAoPqZELGzHLczaob/LBHB9 iDUjWxrn1qURQFRvJLLlEW+1s9IThPfx62lsSAS1tkoTcDNfI/xUDw+NiCGy1AZP M2XVOwPI8ucPMCIj2whNsnwsfu4wka1jIHSM6I03PWRdH1HSmLmyJRnYEzS/QftV RI8ABy/BNaB85CBfUGjlohxwD1dYHCKd0WKO1Sd3/YrOIN4Ls0Th4Vn5+dphFbA8 xM5K9vTzNjEGZrjTLiE9OIkXIOn8dUS8WN9fdDsQlbAP+lmes+SeIDhbYCKH3UV6 CBHhm47qASV/sNi3QsS5JfkjXj/bwmj+XSoecVqYk+8oujx3ERzplRxbLKEOODru iKP1vA12OdaYdGlcK1erDAdddrdu0WTvilM6/XqBHyIsjsi5ZB2zui9OUwNgLjaN udLeJm9hGSqWObxWhJIiF9omf+8VostSDrL+zb3VVWvQsj3KRTPro4tkHwhS7rTd 1nHR3XijRBG5XkVnX4117Q5JR+07amxq6KQakXeljZfmy6qexXeC3UPEvoynV6N6 xba9TkaiG3XyJhg6CT6KTVVzxfnge3NlcmTYnQZcxIHvbWyeBr4b1IA/eyNnJSdE 8evAtLXPUMqFjUZFaHtuQdCPddskd9Cg3vlud234rsVmpFfKF2Q= =KwXl -----END PGP SIGNATURE----- Merge tag 'sh-for-v6.7-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/glaubitz/sh-linux Pull sh updates from John Paul Adrian Glaubitz: "While the previously announced patch series for converting arch/sh to device trees is not yet ready for inclusion to mainline and therefore didn't make it for this pull request, there are still a small number changes for v6.7 which include one platform (board plus CPU and driver code) removal plus two fixes. The removal sent in by Arnd Bergmann concerns the microdev board which was an early SuperH prototype board that was never used in production. With the board removed, we were able to drop the now unused code for the SH4-202 CPU and well as the driver code for the superhyway bus and a custom implementation for ioport_map() and ioport_unmap() which will allow us to simplify ioport handling in the future. Another patch set by Geert Uytterhoeven revives SuperH BIOS earlyprintk support which got accidentally disabled in e76fe57447e88916 ("sh: Remove old early serial console code V2"), the second patch in the series updates the documentation. Finally, a patch by Masami Hiramatsu fixes a regression reported by the kernel test robot which uncovered that arch/sh is not implementing arch_cmpxchg_local() and therefore needs use __generic_cmpxchg_local() instead" * tag 'sh-for-v6.7-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/glaubitz/sh-linux: locking/atomic: sh: Use generic_cmpxchg_local for arch_cmpxchg_local() Documentation: kernel-parameters: Add earlyprintk=bios on SH sh: bios: Revive earlyprintk support sh: machvec: Remove custom ioport_{un,}map() sh: Remove superhyway bus support sh: Remove unused SH4-202 support sh: Remove stale microdev board |
||
Linus Torvalds
|
6ed92e559a |
SCSI misc on 20231102
Updates to the usual drivers (ufs, megaraid_sas, lpfc, target, ibmvfc, scsi_debug) plus the usual assorted minor fixes and updates. The major change this time around is a prep patch for rethreading of the driver reset handler API not to take a scsi_cmd structure which starts to reduce various drivers' dependence on scsi_cmd in error handling. Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com> -----BEGIN PGP SIGNATURE----- iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCZUORLiYcamFtZXMuYm90 dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishQ4WAQDDIhzp /PiJBBtt0U9ii/lYqRLrOVnN0extKEgEGO+FbwEAssKgs+5Jn/7XCgdpSrx8Co3/ 0cPXrZGxs7tFpFWLZjM= =AlRU -----END PGP SIGNATURE----- Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI updates from James Bottomley: "Updates to the usual drivers (ufs, megaraid_sas, lpfc, target, ibmvfc, scsi_debug) plus the usual assorted minor fixes and updates. The major change this time around is a prep patch for rethreading of the driver reset handler API not to take a scsi_cmd structure which starts to reduce various drivers' dependence on scsi_cmd in error handling" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (132 commits) scsi: ufs: core: Leave space for '\0' in utf8 desc string scsi: ufs: core: Conversion to bool not necessary scsi: ufs: core: Fix race between force complete and ISR scsi: megaraid: Fix up debug message in megaraid_abort_and_reset() scsi: aic79xx: Fix up NULL command in ahd_done() scsi: message: fusion: Initialize return value in mptfc_bus_reset() scsi: mpt3sas: Fix loop logic scsi: snic: Remove useless code in snic_dr_clean_pending_req() scsi: core: Add comment to target_destroy in scsi_host_template scsi: core: Clean up scsi_dev_queue_ready() scsi: pmcraid: Add missing scsi_device_put() in pmcraid_eh_target_reset_handler() scsi: target: core: Fix kernel-doc comment scsi: pmcraid: Fix kernel-doc comment scsi: core: Handle depopulation and restoration in progress scsi: ufs: core: Add support for parsing OPP scsi: ufs: core: Add OPP support for scaling clocks and regulators scsi: ufs: dt-bindings: common: Add OPP table scsi: scsi_debug: Add param to control sdev's allow_restart scsi: scsi_debug: Add debugfs interface to fail target reset scsi: scsi_debug: Add new error injection type: Reset LUN failed ... |
||
Linus Torvalds
|
431f105188 |
- Core Frameworks
- Add support for a bunch more colours - New Drivers - Add support for Kinetic KTD2026/7 RGB/White LEDs - New Functionality - Add support for device to enter HW Controlled Mode to Turris Omnia LEDs - Add support for HW Gamma Correction to Turris Omnia LEDs - Fix-ups - Apply new __counted_by() annotation to several data structures containing flexible arrays - Rid the return value from Platform's .remove() operation - Use *_cansleep() variants for instances were threads can sleep - Improve the semantics when setting the brightness - Generic clean-ups; code reduction, coding style, standard patterns - Replace strncpy() with strscpy() - Fix-up / add various documentation - Re-author the GPIO associated Trigger to use trigger-sources - Move to using standard APIs and helpers - Improve error checking - Stop using static GPIO bases - Bug Fixes - Fix Pointer to Enum casing warnings - Do not pretend that I2C backed device supports SMBUS - Ensure PWM LEDs are extinguished when disabled, rather than held in a state - Fix 'output may be truncated' warnings -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEdrbJNaO+IJqU8IdIUa+KL4f8d2EFAmVDsTgACgkQUa+KL4f8 d2EQsg/+Jy2zYIpFXaj/sSZCB9gDToIpHNer2XUEgKMXCAF0Ar8SCHvdmIeb9exG rCLb86AxvE2trIcZBRITtRgU4YCAr6yiyNZHCYyLxN+WZLind3lL7mKB1x9gVFbw MKFmQjl9cWmJjI1Mk10NFzhgYJkMotKWZrQqAeggD5gYinieSVXE2RkrcV/zfQxh NqtijzDL0C9pWIXQtqpjic7PSgyC8mIGmD0Q9gyEOWOVbWzmR/vklwEsbirT4nEp 7QIz/b5nwXVEEJ69WCTNeDBmXYeEKw4DMLJxJ6aTYHf62gramtfTH+d6izY3Hnrs EszgWmqmwSqXrwadtg7Zn6xrgec+yDuwj3rwQEQcveOsUJMENtVN6i2ZYO90Hpor XP6jzz+KBT/qLF4syfkO7Z9vV7em1zm/AuoiDieFVBy6vMQJmmCvIb+GE1l5CXUv myEYVu0P9Ir9/2W+z9rqzor2wtZ9OVXT1XCnV6UPU7mNhJIH8PXr9/cjJgsY5vYC H8kZcfaCRlwqPiVA0yucvfEeveptObVojZdkhCH/BnhRtIAWf1jlj5PglfSaOQaU jGy6s/8auS5ua0vX2UYFv0cXxSTZpX+7jDzpQcaIKqOPe/xqUSAeL/N4btY+TlfR zkQxWxksOtVdD2xaIZvGutcAMXRBEIjgDS61SZBLf/jh7N/iXlc= =XYXV -----END PGP SIGNATURE----- Merge tag 'leds-next-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds Pull LED updates from Lee Jones: "Core Frameworks: - Add support for a bunch more colours New Drivers: - Add support for Kinetic KTD2026/7 RGB/White LEDs New Functionality: - Add support for device to enter HW Controlled Mode to Turris Omnia LEDs - Add support for HW Gamma Correction to Turris Omnia LEDs Fix-ups: - Apply new __counted_by() annotation to several data structures containing flexible arrays - Rid the return value from Platform's .remove() operation - Use *_cansleep() variants for instances were threads can sleep - Improve the semantics when setting the brightness - Generic clean-ups; code reduction, coding style, standard patterns - Replace strncpy() with strscpy() - Fix-up / add various documentation - Re-author the GPIO associated Trigger to use trigger-sources - Move to using standard APIs and helpers - Improve error checking - Stop using static GPIO bases Bug Fixes: - Fix Pointer to Enum casing warnings - Do not pretend that I2C backed device supports SMBUS - Ensure PWM LEDs are extinguished when disabled, rather than held in a state - Fix 'output may be truncated' warnings" * tag 'leds-next-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds: (43 commits) leds: lp5521: Add an error check in lp5521_post_init_device leds: gpio: Update headers leds: gpio: Remove unneeded assignment leds: gpio: Move temporary variable for struct device to gpio_led_probe() leds: gpio: Refactor code to use devm_gpiod_get_index_optional() leds: gpio: Utilise PTR_ERR_OR_ZERO() leds: gpio: Keep driver firmware interface agnostic leds: core: Refactor led_update_brightness() to use standard pattern leds: turris-omnia: Fix brightness setting and trigger activating leds: sc27xx: Move mutex_init() down leds: trigger: netdev: Move size check in set_device_name leds: Add ktd202x driver dt-bindings: leds: Add Kinetic KTD2026/2027 LED leds: core: Add more colors from DT bindings to led_colors dt-bindings: leds: Last color ID is now 14 (LED_COLOR_ID_LIME) leds: tca6507: Don't use fixed GPIO base leds: lp3952: Convert to use maple tree register cache leds: lm392x: Convert to use maple tree register cache leds: aw200xx: Convert to use maple tree register cache leds: lm3601x: Convert to use maple tree register cache ... |
||
Linus Torvalds
|
38984d7872 |
- New Functionality
- Add new Device Tree binding for Monolithic Power (MPS) MP3309C step-up converter - Document brightness-levels in bindings for; generic, LED and PWM - Bug Fixes - Ensure PWMs are disabled on; .shutdown(), .suspend() and .remove() -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEdrbJNaO+IJqU8IdIUa+KL4f8d2EFAmVDsVMACgkQUa+KL4f8 d2GsxA//WWkGqltN3lcsG29nANUMsBE2QqCSp8sW/iH8frqkk2tnZ+UIEReNMhKt Q03DnB5HQ/gyydsg0XAvW9bkvh0salIpMdMXXLPeI+Rdl/D3bkuPiutyNQIbjPvC o7debl9rE+eVcJCZBieO/VfY9HFVP6lfBstjjR+Y2PpnxcCTDmXa1KJiiDsUHQ3b /u+PYYdLnwvX1AgbjrqJk4n1qs39a023zOhVfB0JDKO0XXJ8WAkFvEa9FfUQYLAB zZmERCIx1fsSTyfdAXxuRG4CX99abMK92wKWWQjDAv7gbkF6041uQ6CyqgLZMI/T ++xt3kDUhvm4UtOo4O6gkTOu3siTWLoI4D8tX0gYY3Ks9LykQ9r+wjfSikXpor+a Wdg83r/wAyp3vU7ti3Wz/+2b6NwZKCY5WtcN413gjl1tY48+JcaHnUxyjQOZOKkJ ZfmzAhJkbEdeyu0LT6MOGEnPY8ToWzPu2bKsviy8sl6hCxXIP/8PG2Mz3sVz+W6F cXwmtbFnALLI2cuYimWeHgseBf4qUVqFB5/spLm2UI0a3glM7G8zhRzAn5jEpVfS MmFPDzdlU3jKOwC69RrRye2aLtD3Aq101vYbNOTdbQgiab02ARojprDfc7CnDtnt +TOHN6tNzBf/w319mz9yS8KbdZ4So8zO/ifHcEpbgYdtR846jA4= =djoj -----END PGP SIGNATURE----- Merge tag 'backlight-next-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight Pull backlight updates from Lee Jones: "New Functionality: - Add new Device Tree binding for Monolithic Power (MPS) MP3309C step-up converter - Document brightness-levels in bindings for; generic, LED and PWM Bug Fixes: - Ensure PWMs are disabled on .shutdown(), .suspend() and .remove()" * tag 'backlight-next-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight: dt-bindings: backlight: Add brightness-levels related common properties backlight: pwm_bl: Disable PWM on shutdown, suspend and remove dt-bindings: backlight: Add MPS MP3309C |
||
Linus Torvalds
|
27bc0782ef |
- Core Frameworks
- Allow all MFD Cell properties to be filled in dynamically at runtime - Skip disabled device nodes and continue to look for subsequent devices - New Device Support - Add support for Lunar Lake-M PCI to Intel LPSS PCI - Add support for Denverton to Intel ICH LPC - New Functionality - Add support for Clocks to Texas Instruments TWL* Core - Add support for Interrupts to STMicroelectronics STM32 Timers - Fix-ups - Convert to new devm-* (managed) power-off API - Remove superfluous code - Bunch of Device Tree additions, conversions and adaptions - Simplify obtaining resources (memory, device data) using unified API helpers - Trivial coding-style / spelling type clean-ups - Constify / staticify changes - Expand or edit on existing documentation - Convert some Regmap configurations to use the Maple Tree cache - Apply new __counted_by() annotation to several data structures containing flexible arrays - Replace strncpy() with strscpy() - Bug Fixes - Remove double put creating reference imbalances - Ensure headphone/lineout detection sets set when booting with ACPI -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEdrbJNaO+IJqU8IdIUa+KL4f8d2EFAmVDsQcACgkQUa+KL4f8 d2FvXRAAjCwKTtj1cUOw7aiCknPuwHj5NoOvannEZN47/kzzbi35YX2oTOE3mSqc 11U6OLLZ8kpLAvKEy6l82puvDmXRDkQ7eXTFicDgLM2c+FNt3RnfffH+Njr6L8fx a5ncAMTesnCXJAfS/8PfsONvRylGl/zQ/zmeSWvukfVa4BVAWIYcJiRnjjOL/jGf /POTf8ihUjScCeNlRbsx28jOHDZo6RWCMauKywShuSweX/wMuRD8FwBXp8YmcsLH LsYng06Xm+pNtMXv7VB4MQRztRAW7oHduvh/OQ0HkjzlxN8M+wpeZveyq3/i6ut2 q54TlnlLsmmOh42tmgC7sSwmVmegLTnsoEpNJeYl0AJzNvuJ7W+VdDRuUe6mYwDV 5MBThe0MGtLtthglNRR1s7pII18ffz4hDQQFExQ5Ai6ZvYu4b57TB+mKas4cTt9T 7WnoLuPiQW0SPNPWQAYtUDAF16pQmIRME2KYaNIUxGqfDK6GX4EaEQ7//0PHOchE kdip5vDFhiTunHLOjf1Se7ZJO0KFEg/hECTq1tcYUDHSopO5hTwhy6Wcd56xyrKP dkFn+6dl0bGqBCgxDjlJ7tPJ1m2PEDv1MbV1yO3vIU89PPTPotfUPBud1I/H2IN5 wDWTULgWxyCJqlWXZ3HjwCsRXF6H4F4A57ffJukmvivqDcXam9Y= =rwPH -----END PGP SIGNATURE----- Merge tag 'mfd-next-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD updates from Lee Jones: "Core Frameworks: - Allow all MFD Cell properties to be filled in dynamically at runtime - Skip disabled device nodes and continue to look for subsequent devices New Device Support: - Add support for Lunar Lake-M PCI to Intel LPSS PCI - Add support for Denverton to Intel ICH LPC New Functionality: - Add support for Clocks to Texas Instruments TWL* Core - Add support for Interrupts to STMicroelectronics STM32 Timers Fix-ups: - Convert to new devm-* (managed) power-off API - Remove superfluous code - Bunch of Device Tree additions, conversions and adaptions - Simplify obtaining resources (memory, device data) using unified API helpers - Trivial coding-style / spelling type clean-ups - Constify / staticify changes - Expand or edit on existing documentation - Convert some Regmap configurations to use the Maple Tree cache - Apply new __counted_by() annotation to several data structures containing flexible arrays - Replace strncpy() with strscpy() Bug Fixes: - Remove double put creating reference imbalances - Ensure headphone/lineout detection gets set when booting with ACPI" * tag 'mfd-next-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (73 commits) mfd: lpc_ich: Mark *_gpio_offsets data with const spmi: rename spmi device lookup helper spmi: document spmi_device_from_of() refcounting dt-bindings: mfd: armltd: Move Arm board syscon's to separate schema mfd: rk8xx: Add support for RK806 power off mfd: rk8xx: Add support for standard system-power-controller property dt-bindings: mfd: rk806: Allow system-power-controller property dt-bindings: mfd: rk8xx: Deprecate rockchip,system-power-controller dt-bindings: mfd: max8925: Convert to DT schema format mfd: Use i2c_get_match_data() in a selection of drivers mfd: Use device_get_match_data() in a bunch of drivers mfd: mc13xxx-spi/wm831x-spi: Use spi_get_device_match_data() mfd: motorola-cpcap: Drop unnecessary of_match_device() call mfd: arizona-spi: Set pdata.hpdet_channel for ACPI enumerated devs mfd: qcom-spmi-pmic: Switch to EXPORT_SYMBOL_GPL() mfd: qcom-spmi-pmic: Fix revid implementation mfd: qcom-spmi-pmic: Fix reference leaks in revid helper mfd: intel-m10-bmc: Change contact for ABI docs mfd: max8907: Convert to use maple tree register cache mfd: max77686: Convert to use maple tree register cache ... |
||
Linus Torvalds
|
edd8e84ae9 |
sound updates for 6.7
Most of changes at this time are for ASoC, spread over ASoC core and drivers due to the API prefix standardization. Other than that, there have little change wrt API, rather lots of driver-specific updates and fixes. Some highlight below: ASoC: - Standardization of API prefix - GPIO API usage improvements - Support for HDA patches - Lots of work on SOF, including crash dump support - Fixes for noise when stopping some Sounwire CODECs - Support for AMD platforms with es83xx, AMD ACP 6.3 and 7.0, Awinc AT87390 and AW88399, many Intel platforms, many Mediatek platforms, Qualcomm SM6115 and SC7180 platforms, Richtek RTQ9128 and Texas Instruments TAS575x HD-audio and USB-audio: - Deferred probe support of audio component binding - More fixes and enhancements for Cirrus subcodecs - USB Scarlett2 mixer and McIntosh DSD quirk Others: - More enhancement of snd-aloop driver - Update MAINTAINERS entry for linux-sound mailing list -----BEGIN PGP SIGNATURE----- iQJCBAABCAAsFiEEIXTw5fNLNI7mMiVaLtJE4w1nLE8FAmVDqXcOHHRpd2FpQHN1 c2UuZGUACgkQLtJE4w1nLE+PbhAAsmiOxjXpCNVGbhy9tR+UB9p6gCIzFv5RQQIc 0DzqnqssbJt86jtFMrv0VC6BNfnwcyBVzKxWinKz861xXiM9SRU5vTirUES3Cil/ sZaQYC9ppTrZm3q2EGF4eGC349oZGzuLzk1EkEVPfNHiELwcO4R1NZbtgWKIc8LE bNz8RT3FyxHAv+5juW5suGs0Bq4Mwa9z+eM8xEPwxPL3gpIAb5EapIesHEgaa893 w3jYwKRHCDq0ADtXIY9xI3ypqenfbeTge4nuBnw354sPRVdZInrRfCNkTJojb+tp 5Pc2gpFmTUGy6T2wG6QP23VgeV14BJHrQD3Z1Wh2aQ8V+ARa92XvY1Xeg4vJ+NE0 yhvlh028GjKrMIvhl7mmepV9mia2zA1TluqlzKEla3B5lIj0E1zvMA+vCzNAz3Ro lV2Q0dpJ3ENQ9ahGF/d37u3glrqXxISlG9uTGdY0UcF7U9Iyxb0jEnhQYl05b+zR Oaw/HApuvIUj4cdJWEYf0AnTTqeE8KSZ3wUlPPyuQAdAusCaQFMciWeO0EeLqEId KR/rbnSgVKS3zHLdNw5A67Sv36E9OG/E+EiJ6Tet15a69yq2Oyv4pwMMwbqsvBG5 8kNbtBFGxOHnCrZgM6VV2/g3BP/IwyIFd5kkS2q13FXBTYRpY01dQDjHlmspasNK hYH69AA= =2/dI -----END PGP SIGNATURE----- Merge tag 'sound-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound updates from Takashi Iwai: "Most of changes at this time are for ASoC, spread over ASoC core and drivers due to the API prefix standardization. Other than that, there have little change wrt API, rather lots of driver-specific updates and fixes. Some highlight below: ASoC: - Standardization of API prefix - GPIO API usage improvements - Support for HDA patches - Lots of work on SOF, including crash dump support - Fixes for noise when stopping some Sounwire CODECs - Support for AMD platforms with es83xx, AMD ACP 6.3 and 7.0, Awinc AT87390 and AW88399, many Intel platforms, many Mediatek platforms, Qualcomm SM6115 and SC7180 platforms, Richtek RTQ9128 and Texas Instruments TAS575x HD-audio and USB-audio: - Deferred probe support of audio component binding - More fixes and enhancements for Cirrus subcodecs - USB Scarlett2 mixer and McIntosh DSD quirk Others: - More enhancement of snd-aloop driver - Update MAINTAINERS entry for linux-sound mailing list" * tag 'sound-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (485 commits) ALSA: hda: cs35l41: Fix missing error code in cs35l41_smart_amp() ALSA: hda: cs35l41: mark cs35l41_verify_id() static ASoC: codecs: wsa883x: make use of new mute_unmute_on_trigger flag ASoC: soc-dai: add flag to mute and unmute stream during trigger ASoC: ams-delta.c: use component after check ASoC: amd: acp: select SND_SOC_AMD_ACP_LEGACY_COMMON for ACP63 ASoC: codecs: aw88399: fix typo in Kconfig select ASoC: amd: acp: add ACPI dependency ASoC: Intel: avs: Add rt5514 machine board ASoC: Intel: avs: Add rt5514 machine board ALSA: scarlett2: Add missing check with firmware version control ALSA: virtio: use ack callback ALSA: scarlett2: Remap Level Meter values ALSA: scarlett2: Allow passing any output to line_out_remap() ALSA: scarlett2: Add support for reading firmware version ALSA: scarlett2: Rename Gen 3 config sets ALSA: scarlett2: Rename scarlett_gen2 to scarlett2 ASoC: cs35l41: Detect CSPL errors when sending CSPL commands ALSA: hda: cs35l41: Check CSPL state after loading firmware ALSA: hda: cs35l41: Do not unload firmware before reset in system suspend ... |
||
Linus Torvalds
|
27beb3ca34 |
pci-v6.7-changes
-----BEGIN PGP SIGNATURE----- iQJIBAABCgAyFiEEgMe7l+5h9hnxdsnuWYigwDrT+vwFAmVBaU8UHGJoZWxnYWFz QGdvb2dsZS5jb20ACgkQWYigwDrT+vwEdxAAo++s98+ZaaTdUuoV0Zpft1fuY6Yr mR80jUDxjHDbcI1G4iNVUSWG6pGIdlURnrBp5kU74FV9R2Ps3Fl49XQUHowE0HfH D/qmihiJQdnMsQKwzw3XGoTSINrDcF6nLafl9brBItVkgjNxfxSEbnweJMBf+Boc rpRXHzxbVHVjwwhBLODF2Wt/8sQ24w9c+wcQkpo7im8ZZReoigNMKgEa4J7tLlqA vTyPR/K6QeU8IBUk2ObCY3GeYrVuqi82eRK3Uwzu7IkQwA9orE416Okvq3Z026/h TUAivtrcygHaFRdGNvzspYLbc2hd2sEXF+KKKb6GNAjxuDWUhVQW4ObY4FgFkZ65 Gqz/05D6c1dqTS3vTxp3nZYpvPEbNnO1RaGRL4h0/mbU+QSPSlHXWd9Lfg6noVVd 3O+CcstQK8RzMiiWLeyctRPV5XIf7nGVQTJW5aCLajlHeJWcvygNpNG4N57j/hXQ gyEHrz3idXXHXkBKmyWZfre6YpLkxZtKyONZDHWI/AVhU0TgRdJWmqpRfC1kVVUe IUWBRcPUF4/r3jEu6t10N/aDWQN1uQzIsJNnCrKzAddPDTTYQJk8VVzKPo8SVxPD X+OjEMgBB/fXUfkJ7IMwgYnWaFJhxthrs6/3j1UqRvGYRoulE4NdWwJDky9UYIHd qV3dzuAxC/cpv08= =G//C -----END PGP SIGNATURE----- Merge tag 'pci-v6.7-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci Pull pci updates from Bjorn Helgaas: "Enumeration: - Use acpi_evaluate_dsm_typed() instead of open-coding _DSM evaluation to learn device characteristics (Andy Shevchenko) - Tidy multi-function header checks using new PCI_HEADER_TYPE_MASK definition (Ilpo Järvinen) - Simplify config access error checking in various drivers (Ilpo Järvinen) - Use pcie_capability_clear_word() (not pcie_capability_clear_and_set_word()) when only clearing (Ilpo Järvinen) - Add pci_get_base_class() to simplify finding devices using base class only (ignoring subclass and programming interface) (Sui Jingfeng) - Add pci_is_vga(), which includes ancient PCI_CLASS_NOT_DEFINED_VGA devices from before the Class Code was added to PCI (Sui Jingfeng) - Use pci_is_vga() for vgaarb, sysfs "boot_vga", virtio, qxl to include ancient VGA devices (Sui Jingfeng) Resource management: - Make pci_assign_unassigned_resources() non-init because sparc uses it after init (Randy Dunlap) Driver binding: - Retain .remove() and .probe() callbacks (previously __init) because sysfs may cause them to be called later (Uwe Kleine-König) - Prevent xHCI driver from claiming AMD VanGogh USB3 DRD device, so it can be claimed by dwc3 instead (Vicki Pfau) PCI device hotplug: - Add Ampere Altra Attention Indicator extension driver for acpiphp (D Scott Phillips) Power management: - Quirk VideoPropulsion Torrent QN16e with longer delay after reset (Lukas Wunner) - Prevent users from overriding drivers that say we shouldn't use D3cold (Lukas Wunner) - Avoid PME from D3hot/D3cold for AMD Rembrandt and Phoenix USB4 because wakeup interrupts from those states don't work if amd-pmc has put the platform in a hardware sleep state (Mario Limonciello) IOMMU: - Disable ATS for Intel IPU E2000 devices with invalidation message endianness erratum (Bartosz Pawlowski) Error handling: - Factor out interrupt enable/disable into helpers (Kai-Heng Feng) Peer-to-peer DMA: - Fix flexible-array usage in struct pci_p2pdma_pagemap in case we ever use pagemaps with multiple entries (Gustavo A. R. Silva) ASPM: - Revert a change that broke when drivers disabled L1 and users later enabled an L1.x substate via sysfs, and fix a similar issue when users disabled L1 via sysfs (Heiner Kallweit) Endpoint framework: - Fix double free in __pci_epc_create() (Dan Carpenter) - Use IS_ERR_OR_NULL() to simplify endpoint core (Ruan Jinjie) Cadence PCIe controller driver: - Drop unused "is_rc" member (Li Chen) Freescale Layerscape PCIe controller driver: - Enable 64-bit addressing in endpoint mode (Guanhua Gao) Intel VMD host bridge driver: - Fix multi-function header check (Ilpo Järvinen) Microsoft Hyper-V host bridge driver: - Annotate struct hv_dr_state with __counted_by (Kees Cook) NVIDIA Tegra194 PCIe controller driver: - Drop setting of LNKCAP_MLW (max link width) since dw_pcie_setup() already does this via dw_pcie_link_set_max_link_width() (Yoshihiro Shimoda) Qualcomm PCIe controller driver: - Use PCIE_SPEED2MBS_ENC() to simplify encoding of link speed (Manivannan Sadhasivam) - Add a .write_dbi2() callback so DBI2 register writes, e.g., for setting the BAR size, work correctly (Manivannan Sadhasivam) - Enable ASPM for platforms that use 1.9.0 ops, because the PCI core doesn't enable ASPM states that haven't been enabled by the firmware (Manivannan Sadhasivam) Renesas R-Car Gen4 PCIe controller driver: - Add DesignWare core support (set max link width, EDMA_UNROLL flag, .pre_init(), .deinit(), etc) for use by R-Car Gen4 driver (Yoshihiro Shimoda) - Add driver and DT schema for DesignWare-based Renesas R-Car Gen4 controller in both host and endpoint mode (Yoshihiro Shimoda) Xilinx NWL PCIe controller driver: - Update ECAM size to support 256 buses (Thippeswamy Havalige) - Stop setting bridge primary/secondary/subordinate bus numbers, since PCI core does this (Thippeswamy Havalige) Xilinx XDMA controller driver: - Add driver and DT schema for Zynq UltraScale+ MPSoCs devices with Xilinx XDMA Soft IP (Thippeswamy Havalige) Miscellaneous: - Use FIELD_GET()/FIELD_PREP() to simplify and reduce use of _SHIFT macros (Ilpo Järvinen, Bjorn Helgaas) - Remove logic_outb(), _outw(), outl() duplicate declarations (John Sanpe) - Replace unnecessary UTF-8 in Kconfig help text because menuconfig doesn't render it correctly (Liu Song)" * tag 'pci-v6.7-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (102 commits) PCI: qcom-ep: Add dedicated callback for writing to DBI2 registers PCI: Simplify pcie_capability_clear_and_set_word() to ..._clear_word() PCI: endpoint: Fix double free in __pci_epc_create() PCI: xilinx-xdma: Add Xilinx XDMA Root Port driver dt-bindings: PCI: xilinx-xdma: Add schemas for Xilinx XDMA PCIe Root Port Bridge PCI: xilinx-cpm: Move IRQ definitions to a common header PCI: xilinx-nwl: Modify ECAM size to enable support for 256 buses PCI: xilinx-nwl: Rename the NWL_ECAM_VALUE_DEFAULT macro dt-bindings: PCI: xilinx-nwl: Modify ECAM size in the DT example PCI: xilinx-nwl: Remove redundant code that sets Type 1 header fields PCI: hotplug: Add Ampere Altra Attention Indicator extension driver PCI/AER: Factor out interrupt toggling into helpers PCI: acpiphp: Allow built-in drivers for Attention Indicators PCI/portdrv: Use FIELD_GET() PCI/VC: Use FIELD_GET() PCI/PTM: Use FIELD_GET() PCI/PME: Use FIELD_GET() PCI/ATS: Use FIELD_GET() PCI/ATS: Show PASID Capability register width in bitmasks PCI/ASPM: Fix L1 substate handling in aspm_attr_store_common() ... |
||
Linus Torvalds
|
87a201b43b |
Changes since last update:
- Fix inode metadata space layout documentation; - Avoid warning MicroLZMA format anymore; - Fix erofs_insert_workgroup() lockref usage; - Some cleanups. -----BEGIN PGP SIGNATURE----- iQJFBAABCgAvFiEEQ0A6bDUS9Y+83NPFUXZn5Zlu5qoFAmVBMVoRHHhpYW5nQGtl cm5lbC5vcmcACgkQUXZn5Zlu5qq8iA/+NdvaKPFvexKuJkW2n9t4UaDEPqS6qobk B1uIaXxDhz6RdhDyhLA7ysQQi1Z8g0t/MXgCWZGM1NXJ995Y0VE+dFlT+a5QPLiu 4rz8bnZpdUHVF0jIyoru/nPZQWXsYBh2AeYLKPi+nvQoCRtoRsvdKXxv76iEF45o zE2548TXqogL3Q04oH040fRzVwYROqnF85q9uCPNFS/Sh/swxyob9waBijlzbECS GLjyJ+ZsQBBG95SzwNEPSFek5+od9ty2UKQwDJfqABOhbQT2Li6r2t0afyrlqDQY m7VvvmzkFe5uYwAkuMkAOxhnW+eBzxz/whk+8W3dw/lm4dDbe0LuCrGXVdivdf3F dO5ywSEGJnOH1FqNF1ubAWdzJ+qoaTupuOpwrGM9/lHGgxCIVjW06XzKfOv/AfaQ VR2SPTrcA6eulXsLGopVho9dtHBUQZIAmJjQcWIyCpYm15NmElDXsybN/Os2Hgo0 d2Tsx9fgsN25xRsIBPxiV6qsEXqx56Nce1U4k0VV4ali81Y22nqq6rV4AFWz8KNJ LhYFcL5YgO5RxYEpoQGkt4hyeDkxt4lc/cYqCr8E8kpNEuz0P3O27NcLnSP7CJVQ pBYfSoV5tm+SyK4toeacG+HJTnohNyLE4vIXN96awoCBfJiickY7ZxJNuf6wRbOA 4Y+aMq/lQXQ= =Yum+ -----END PGP SIGNATURE----- Merge tag 'erofs-for-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs Pull erofs updates from Gao Xiang: "Nothing exciting lands for this cycle, since we're still busying in developing support for sub-page blocks and large-folios of compressed data for new scenarios on Android. In this cycle, MicroLZMA format is marked as stable, and there are minor cleanups around documentation and codebase. In addition, it also fixes incorrect lockref usage in erofs_insert_workgroup(). Summary: - Fix inode metadata space layout documentation - Avoid warning for MicroLZMA format anymore - Fix erofs_insert_workgroup() lockref usage - Some cleanups" * tag 'erofs-for-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs: erofs: fix erofs_insert_workgroup() lockref usage erofs: tidy up redundant includes erofs: get rid of ROOT_NID() erofs: simplify compression configuration parser erofs: don't warn MicroLZMA format anymore erofs: fix inode metadata space layout description in documentation |
||
Linus Torvalds
|
babe393974 |
The number of commits for documentation is not huge this time around, but
there are some significant changes nonetheless: - Some more Spanish-language and Chinese translations. - The much-discussed documentation of the confidential-computing threat model. - Powerpc and RISCV documentation move under Documentation/arch - these complete this particular bit of documentation churn. - A large traditional-Chinese documentation update. - A new document on backporting and conflict resolution. - Some kernel-doc and Sphinx fixes. Plus the usual smattering of smaller updates and typo fixes. -----BEGIN PGP SIGNATURE----- iQFDBAABCAAtFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAmVBNv8PHGNvcmJldEBs d24ubmV0AAoJEBdDWhNsDH5Y0JkH/36MOpkaDnsY69/dMRKSuD4mAAP2H6LS8V63 SsMgH5VCj8lcy/Tz1+J89t14pbcX8l0viKxSo4UxvzoJ5snrz8A8gZ9oqY7NCcNs nMtolnN5IwdbgGnEGqASSLsl07lnabhRK0VYv9ZO7lHjYQp97VsJ/qrjJn385HFE vYW8iRcxcKdwtuuwOtbPcdAMjP54saJdNC5wMLsfMR0csKcGbzaSNpqpiGovzT7l phG2DSxrJH0gUZyeGPryroNppaf+mVKSDSiwRdI8mzm0J67p6dZYYwBS1Iw6Awbf 8iYoj6W63/FVQbXffPx5d6ffOSQh4JkAskxgBUOzluSGusSDc+4= =9HU5 -----END PGP SIGNATURE----- Merge tag 'docs-6.7' of git://git.lwn.net/linux Pull documentation updates from Jonathan Corbet: "The number of commits for documentation is not huge this time around, but there are some significant changes nonetheless: - Some more Spanish-language and Chinese translations - The much-discussed documentation of the confidential-computing threat model - Powerpc and RISCV documentation move under Documentation/arch - these complete this particular bit of documentation churn - A large traditional-Chinese documentation update - A new document on backporting and conflict resolution - Some kernel-doc and Sphinx fixes Plus the usual smattering of smaller updates and typo fixes" * tag 'docs-6.7' of git://git.lwn.net/linux: (40 commits) scripts/kernel-doc: Fix the regex for matching -Werror flag docs: backporting: address feedback Documentation: driver-api: pps: Update PPS generator documentation speakup: Document USB support doc: blk-ioprio: Bring the doc in line with the implementation docs: usb: fix reference to nonexistent file in UVC Gadget docs: doc-guide: mention 'make refcheckdocs' Documentation: fix typo in dynamic-debug howto scripts/kernel-doc: match -Werror flag strictly Documentation/sphinx: Remove the repeated word "the" in comments. docs: sparse: add SPDX-License-Identifier docs/zh_CN: Add subsystem-apis Chinese translation docs/zh_TW: update contents for zh_TW docs: submitting-patches: encourage direct notifications to commenters docs: add backporting and conflict resolution document docs: move riscv under arch docs: update link to powerpc/vmemmap_dedup.rst mm/memory-hotplug: fix typo in documentation docs: move powerpc under arch PCI: Update the devres documentation regarding to pcim_*() ... |
||
Linus Torvalds
|
7dc0e9c7dd |
linux_kselftest-next-6.7-rc1
This kselftest update for Linux 6.7-rc1 consists of: -- kbuild kselftest-merge target fixes -- fixes to several tests -- resctrl test fixes and enhancements -- ksft_perror() helper and reporting improvements -- printf attribute to kselftest prints to improve reporting -- documentation and clang build warning fixes Bulk of the patches are for resctrl fixes and enhancements. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEPZKym/RZuOCGeA/kCwJExA0NQxwFAmVCoHMACgkQCwJExA0N QxwzrA//ehiiLdV2lyghzPpDTVY8jKlB1xIpg3s0r0M3m/j6nAdnOgOe2gkapT7T gFGL0r7xL9crqFdymwDANLSvNWOeghqB1oIok9Ruw5Rl3FcLnkh920bE6tPsddJg 9+/KqtZvL0Sr43l9OSgX2Uzqyw60wRQwpO0431hmgnKjblk8Rh4GZ7fUCLLNf4Ia yOq1s2/cdmEwRc96lDaBWZaOTusejwh/xy8tgAjozHipLsmsexbyyHVWJWkVhMOD ZklCtrq4lckRz+Vky6akvjoL6Mjl//7pg323e2fUcDCQxQvqwnCo2VqqyOVBnN2A 6XHQ6yXwh0xzCKRFgAiFhWlsKOz3wEIDrdp4dmhDkg4lw4gGJcwNke1UyX5zXYKM 1a6R1vbQS9qQOsWf34AYKZBHruFNtUt0FJYgI43SuH+fGc0D5cU91Rz+s9QIPCwj 8tcr5RWin8BOziDz05lxSKWRHD+3oc5qmsmGYBJhilwtvY2wNbRZNDZjiO28kiIy 3kUWXeCtHmZE1KHK1H5v6bMC8SqUU7ukvV5WebqGpxzJ2eFPbeXcek9/AWSWOFni 7thUg6MG3e4c/zRk8JYbmqXS/GeTkdmc3+VMXApLhTB8uSOWsnVMfJS9Zc2A1tGg n6NRBJFQO8t9Wm1l9XvlnC9HA/8lO/3uih+SzKn/u8KvoN96HPM= =JZb+ -----END PGP SIGNATURE----- Merge tag 'linux_kselftest-next-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull kselftest updates from Shuah Khan: - kbuild kselftest-merge target fixes - fixes to several tests - resctrl test fixes and enhancements - ksft_perror() helper and reporting improvements - printf attribute to kselftest prints to improve reporting - documentation and clang build warning fixes The bulk of the patches are for resctrl fixes and enhancements. * tag 'linux_kselftest-next-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (51 commits) selftests/resctrl: Fix MBM test failure when MBA unavailable selftests/clone3: Report descriptive test names selftests:modify the incorrect print format selftests/efivarfs: create-read: fix a resource leak selftests/ftrace: Add riscv support for kprobe arg tests selftests/ftrace: add loongarch support for kprobe args char tests selftests/amd-pstate: Added option to provide perf binary path selftests/amd-pstate: Fix broken paths to run workloads in amd-pstate-ut selftests/resctrl: Move run_benchmark() to a more fitting file selftests/resctrl: Fix schemata write error check selftests/resctrl: Reduce failures due to outliers in MBA/MBM tests selftests/resctrl: Fix feature checks selftests/resctrl: Refactor feature check to use resource and feature name selftests/resctrl: Move _GNU_SOURCE define into Makefile selftests/resctrl: Remove duplicate feature check from CMT test selftests/resctrl: Extend signal handler coverage to unmount on receiving signal selftests/resctrl: Fix uninitialized .sa_flags selftests/resctrl: Cleanup benchmark argument parsing selftests/resctrl: Remove ben_count variable selftests/resctrl: Make benchmark command const and build it with pointers ... |
||
Linus Torvalds
|
1b10d2c8c6 |
Bootconfig for v6.7:
- Documentation update for /proc/cmdline, which includes both the parameters from bootloader and the embedded parameters in the kernel. - fs/proc: Add bootloader argument as a comment line to /proc/bootconfig so that the user can distinguish what parameters were passed from bootloader even if bootconfig modified that. - Documentation fix to add /proc/bootconfig to proc.rst. -----BEGIN PGP SIGNATURE----- iQFPBAABCgA5FiEEh7BulGwFlgAOi5DV2/sHvwUrPxsFAmVAzokbHG1hc2FtaS5o aXJhbWF0c3VAZ21haWwuY29tAAoJENv7B78FKz8bJxMH+QHgxumk/zhQ6TG1szG3 TWrkhg5oP2hGRTbJc6lK/BJM5E/xz6SNoGP6nEEW5JdkzKwNyNSLab+J0as9Ua3V KtJGiAtp4FZpVl6B2y5UBqBerRl8U4NjW8TOsEv8Dy4gVlgjdbyS7fzy3T86DEZ5 QGQ004pYVciSzmRvEmk3f0GUqsgJUYOjZWIGp2+fukpTnJhD4o3K3UwUs4Rz1tF7 cnVm34af67648/mGSxB+qHBHq4dznrWopv/SgH6OcEzOOpvEGAwPuteAms3S8g3j WOZNHB7QlNkVlASlAcC+yPHjJBtWMfRTsWQIxW5F0wSqq0SRCzTMLHU1wltJagyq lBQ= =J8P0 -----END PGP SIGNATURE----- Merge tag 'bootconfig-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace Pull bootconfig updates from Masami Hiramatsu: - Documentation update for /proc/cmdline, which includes both the parameters from bootloader and the embedded parameters in the kernel - fs/proc: Add bootloader argument as a comment line to /proc/bootconfig so that the user can distinguish what parameters were passed from bootloader even if bootconfig modified that - Documentation fix to add /proc/bootconfig to proc.rst * tag 'bootconfig-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: doc: Add /proc/bootconfig to proc.rst fs/proc: Add boot loader arguments as comment to /proc/bootconfig doc: Update /proc/cmdline documentation to include boot config |
||
Linus Torvalds
|
1e0c505e13 |
asm-generic updates for v6.7
The ia64 architecture gets its well-earned retirement as planned, now that there is one last (mostly) working release that will be maintained as an LTS kernel. The architecture specific system call tables are updated for the added map_shadow_stack() syscall and to remove references to the long-gone sys_lookup_dcookie() syscall. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmVC40IACgkQYKtH/8kJ Uidhmw/9EX+aWSXGoObJ3fngaNSMw+PmrEuP8qEKBHxfKHcCdX3hc451Oh4GlhaQ tru91pPwgNvN2/rfoKusxT+V4PemGIzfNni/04rp+P0kvmdw5otQ2yNhsQNsfVmq XGWvkxF4P2GO6bkjjfR/1dDq7GtlyXtwwPDKeLbYb6TnJOZjtx+EAN27kkfSn1Ms R4Sa3zJ+DfHUmHL5S9g+7UD/CZ5GfKNmIskI4Mz5GsfoUz/0iiU+Bge/9sdcdSJQ kmbLy5YnVzfooLZ3TQmBFsO3iAMWb0s/mDdtyhqhTVmTUshLolkPYyKnPFvdupyv shXcpEST2XJNeaDRnL2K4zSCdxdbnCZHDpjfl9wfioBg7I8NfhXKpf1jYZHH1de4 LXq8ndEFEOVQw/zSpYWfQq1sux8Jiqr+UK/ukbVeFWiGGIUs91gEWtPAf8T0AZo9 ujkJvaWGl98O1g5wmBu0/dAR6QcFJMDfVwbmlIFpU8O+MEaz6X8mM+O5/T0IyTcD eMbAUjj4uYcU7ihKzHEv/0SS9Of38kzff67CLN5k8wOP/9NlaGZ78o1bVle9b52A BdhrsAefFiWHp1jT6Y9Rg4HOO/TguQ9e6EWSKOYFulsiLH9LEFaB9RwZLeLytV0W vlAgY9rUW77g1OJcb7DoNv33nRFuxsKqsnz3DEIXtgozo9CzbYI= =H1vH -----END PGP SIGNATURE----- Merge tag 'asm-generic-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic Pull ia64 removal and asm-generic updates from Arnd Bergmann: - The ia64 architecture gets its well-earned retirement as planned, now that there is one last (mostly) working release that will be maintained as an LTS kernel. - The architecture specific system call tables are updated for the added map_shadow_stack() syscall and to remove references to the long-gone sys_lookup_dcookie() syscall. * tag 'asm-generic-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: hexagon: Remove unusable symbols from the ptrace.h uapi asm-generic: Fix spelling of architecture arch: Reserve map_shadow_stack() syscall number for all architectures syscalls: Cleanup references to sys_lookup_dcookie() Documentation: Drop or replace remaining mentions of IA64 lib/raid6: Drop IA64 support Documentation: Drop IA64 from feature descriptions kernel: Drop IA64 support from sig_fault handlers arch: Remove Itanium (IA-64) architecture |
||
Linus Torvalds
|
385903a7ec |
SoC driver updates for 6.7
The highlights for the driver support this time are - Qualcomm platforms gain support for the Qualcomm Secure Execution Environment firmware interface to access EFI variables on certain devices, and new features for multiple platform and firmware drivers. - Arm FF-A firmware support gains support for v1.1 specification features, in particular notification and memory transaction descriptor changes. - SCMI firmware support now support v3.2 features for clock and DVFS configuration and a new transport for Qualcomm platforms. - Minor cleanups and bugfixes are added to pretty much all the active platforms: qualcomm, broadcom, dove, ti-k3, rockchip, sifive, amlogic, atmel, tegra, aspeed, vexpress, mediatek, samsung and more. In particular, this contains portions of the treewide conversion to use __counted_by annotations and the device_get_match_data helper. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmVC10IACgkQYKtH/8kJ UifFoQ//Tw7aux88EA2UkyL2Wulv80NwRQn3tQlxI/6ltjBX64yeQ6Y8OzmYdSYK 20NEpbU7VWOFftN+D6Jp1HLrvfi0OV9uJn3WiTX3ChgDXixpOXo4TYgNNTlb9uZ4 MrSTG3NkS27m/oTaCmYprOObgSNLq1FRCGIP7w4U9gyMk9N9FSKMpSJjlH06qPz6 WBLTaIwPgBsyrLfCdxfA1y7AFCAHVxQJO4bp0VWSIalTrneGTeQrd2FgYMUesQ2e fIUNCaU4mpmj8XnQ/W19Wsek8FRB+fOh0hn/Gl+iHYibpxusIsn7bkdZ5BOJn2J0 OY3C1biopaaxXcZ+wmnX9X0ieZ3TDsHzYOEf0zmNGzMZaZkV8kQt4/Ykv77xz6Gc 4Bl6JI5QZ4rTZvlHYGMYxhy3hKuB31mO2rHbei7eR7J7UmjzWcl5P6HYfCgj7wzH crIWj1IR1Nx6Dt/wXf3HlRcEiAEJ2D0M3KIFjAVT239TsxacBfDrRk+YedF2bKbn WMYfVM6jJnPOykGg/gMRlttS/o/7TqHBl3y/900Idiijcm3cRPbQ+uKfkpHXftN/ 2vOtsw7pzEg7QQI9GVrb4drTrLvYJ7GQOi4o0twXTCshlXUk2V684jvHt0emFkdX ew9Zft4YLAYSmuJ3XqGhhMP63FsHKMlB1aSTKKPeswdIJmrdO80= =QIut -----END PGP SIGNATURE----- Merge tag 'soc-drivers-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull SoC driver updates from Arnd Bergmann: "The highlights for the driver support this time are - Qualcomm platforms gain support for the Qualcomm Secure Execution Environment firmware interface to access EFI variables on certain devices, and new features for multiple platform and firmware drivers. - Arm FF-A firmware support gains support for v1.1 specification features, in particular notification and memory transaction descriptor changes. - SCMI firmware support now support v3.2 features for clock and DVFS configuration and a new transport for Qualcomm platforms. - Minor cleanups and bugfixes are added to pretty much all the active platforms: qualcomm, broadcom, dove, ti-k3, rockchip, sifive, amlogic, atmel, tegra, aspeed, vexpress, mediatek, samsung and more. In particular, this contains portions of the treewide conversion to use __counted_by annotations and the device_get_match_data helper" * tag 'soc-drivers-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (156 commits) soc: qcom: pmic_glink_altmode: Print return value on error firmware: qcom: scm: remove unneeded 'extern' specifiers firmware: qcom: scm: add a missing forward declaration for struct device firmware: qcom: move Qualcomm code into its own directory soc: samsung: exynos-chipid: Convert to platform remove callback returning void soc: qcom: apr: Add __counted_by for struct apr_rx_buf and use struct_size() soc: qcom: pmic_glink: fix connector type to be DisplayPort soc: ti: k3-socinfo: Avoid overriding return value soc: ti: k3-socinfo: Fix typo in bitfield documentation soc: ti: knav_qmss_queue: Use device_get_match_data() firmware: ti_sci: Use device_get_match_data() firmware: qcom: qseecom: add missing include guards soc/pxa: ssp: Convert to platform remove callback returning void soc/mediatek: mtk-mmsys: Convert to platform remove callback returning void soc/mediatek: mtk-devapc: Convert to platform remove callback returning void soc/loongson: loongson2_guts: Convert to platform remove callback returning void soc/litex: litex_soc_ctrl: Convert to platform remove callback returning void soc/ixp4xx: ixp4xx-qmgr: Convert to platform remove callback returning void soc/ixp4xx: ixp4xx-npe: Convert to platform remove callback returning void soc/hisilicon: kunpeng_hccs: Convert to platform remove callback returning void ... |
||
Linus Torvalds
|
c035f0268b |
SoC DT updates for v6.7
There are a couple new SoCs that are supported for the first time: - AMD Pensando Elba is a data processing unit based on Cortex-A72 CPU cores - Sophgo makes RISC-V based chips, and we now support the CV1800B chip used in the milkv-duo board and the massive sg2042 chip in the milkv-pioneer, a 64-core developer workstation. - Qualcomm Snapdragon 720G (sm7125) is a close relative of Snapdragon 7c and gets added with some Xiaomi phones - Renesas gains support for the R8A779F4 (R-Car S4-8) automotive SoC and the RZ/G3S (R9A08G045) embedded SoC. There are also a bunch of newly supported machines that use already supported chips. On the 32-bit side, we have: - USRobotics USR8200 is a NAS/Firewall/router based on the ancient Intel IXP4xx platform - A couple of machines based on the NXP i.MX5 and i.MX6 platforms - One machine each for Allwinner V3s, Aspeed AST2600, Microchip sama5d29 and ST STM32mp157 The other ones all use arm64 cores on chips from allwinner, amlogic, freescale, mediatek, qualcomm and rockchip. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmVC3jwACgkQYKtH/8kJ Uic3Jg//UgKUEr6ckxInnDew/yHW5AOQ35NKWCLNDysZZVnnnWY44j98Sw++NXyY WX9rdQBYWf6XZaIynCIF0RqkYSsuPw5jmEIy5PH/JwFkwEvUgv/FFd285MdHa/zR Rw61K+Aqy/qUDzpEz75z+uy3A0DX6N3ZYP0qvKxzT+oKSkOVYz3rPN5VcMYuPCxO SpXZMz4CPjBf4RCQeApo80JO3SIW0Mnx1Fu589fJrlWhqmlSer7WlmSA3OMcBmKC 5WgNljieEQidYIhlmZDLnDIL7ot2g+0ESz8nYky3UFRKR3MFDyi4yA7PJrr/EMsK X7u8eEESrAqjpVJJKgo+q3foV1nYSaGt9vU/mxaiwme44mzhZLo/xfuzpylZRorW 9ny3bP5GaiReWog15sCzwM3D/H+eJbtDKKiU7QasmXjtl+k8i6hAtvuISVeYkPae n+SdMh3rNsP8n71ybD6aKLp41bQbiO4iUgkyYLh7NHsuSLKq/+EKTiyYmXB6egAZ eeN+JEKvFgwROHCt39UA0Fo+PbOmeOHbNywLMrr1hZPT3ytroe/rgJEt+qdrCzN7 JcKcNTSy2sQX/GIKQ5qHHmphWZsD38SoqsiPtfsrprZiMXwbER23vnFXh7CHGL4I gAra/iNHSsHl5FrF43qhyZA9vCNDYvo13LbS/kyDZ7tO9Q+8M/Q= =NnPm -----END PGP SIGNATURE----- Merge tag 'soc-dt-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull SoC DT updates from Arnd Bergmann: "There are a couple new SoCs that are supported for the first time: - AMD Pensando Elba is a data processing unit based on Cortex-A72 CPU cores - Sophgo makes RISC-V based chips, and we now support the CV1800B chip used in the milkv-duo board and the massive sg2042 chip in the milkv-pioneer, a 64-core developer workstation. - Qualcomm Snapdragon 720G (sm7125) is a close relative of Snapdragon 7c and gets added with some Xiaomi phones - Renesas gains support for the R8A779F4 (R-Car S4-8) automotive SoC and the RZ/G3S (R9A08G045) embedded SoC. There are also a bunch of newly supported machines that use already supported chips. On the 32-bit side, we have: - USRobotics USR8200 is a NAS/Firewall/router based on the ancient Intel IXP4xx platform - A couple of machines based on the NXP i.MX5 and i.MX6 platforms - One machine each for Allwinner V3s, Aspeed AST2600, Microchip sama5d29 and ST STM32mp157 The other ones all use arm64 cores on chips from allwinner, amlogic, freescale, mediatek, qualcomm and rockchip" * tag 'soc-dt-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (641 commits) ARM: dts: BCM5301X: Set switch ports for Linksys EA9200 ARM: dts: BCM5301X: Set fixed-link for extra Netgear R8000 CPU ports ARM: dts: BCM5301X: Explicitly disable unused switch CPU ports ARM: dts: BCM5301X: Relicense Vivek's code to the GPL 2.0+ / MIT ARM: dts: BCM5301X: Relicense Felix's code to the GPL 2.0+ / MIT ARM: dts: BCM5301X: Set MAC address for Asus RT-AC87U arm64: dts: socionext: add missing cache properties riscv: dts: thead: convert isa detection to new properties arm64: dts: Update cache properties for socionext arm64: dts: ti: k3-am654-idk: Add ICSSG Ethernet ports arm64: dts: ti: k3-am654-icssg2: add ICSSG2 Ethernet support arm64: dts: ti: k3-am65-main: Add ICSSG IEP nodes arm64: dts: ti: k3-am62p5-sk: Updates for SK EVM arm64: dts: ti: k3-am62p: Add nodes for more IPs arm64: dts: rockchip: Add Turing RK1 SoM support dt-bindings: arm: rockchip: Add Turing RK1 dt-bindings: vendor-prefixes: add turing arm64: dts: rockchip: Add DFI to rk3588s arm64: dts: rockchip: Add DFI to rk356x arm64: dts: rockchip: Always enable DFI on rk3399 ... |
||
Linus Torvalds
|
3c86a44d62 |
- Move Kconfig files into the pmdomain subsystem
- Drop use of genpd's redundant ->opp_to_performance_state() callback - amlogic: Add support for the T7 power-domains controller - amlogic: Fix mask for the second NNA mem power-domain - bcm: Fixup ASB register read and comparison for bcm2835-power - imx: Fix device link problem for consumers of the pgc power-domain - mediatek: Add support for the MT8365 power domains - qcom: Add support for the rpmhpds for SC8380XP power-domains - qcom: Add support for the rpmhpds for SM8650 power-domains - qcom: Add support for the rpmhpd clocks for SM7150 - qcom: Add support for the rpmpds for MSM8917 (families) power-domains - starfive: Add support for the JH7110 AON PMU -----BEGIN PGP SIGNATURE----- iQJLBAABCgA1FiEEugLDXPmKSktSkQsV/iaEJXNYjCkFAmVCM6UXHHVsZi5oYW5z c29uQGxpbmFyby5vcmcACgkQ/iaEJXNYjCmLYhAAv5zXrU2OhZUtuTO397RrC6Lo I04YKzbmwA6tzvb8BQ9VPkmLf5NCJd/uzHysneohwXYKTOuGNCH/Vbwx7xoMhWul BFqZGc3QCyBhiWmyZJPNMTlc76VgRoxh37c8CBSTMgM448cH/2Hk6yZRNM6ie04T ewVXyYagUzQQIcIszQWGwCtNwTO9C5YXIh5YiF1z9AzPRzJSmM79sAJZ744N7DcW fWohw+MM/WsM4WBAjKUx3DAQkbIEQrsmvcpbQ1LJimxrYf87nJryYloSeiq1IAZ5 VE6Ggb+G9J770HJSMbJ4ftQrxHjanbY+SVMeF5fmLZt7HwHCQEicKmn1QRl2qN8p BH1F5ysvV5pEiBj5YkMLIgwj7tT1CxBxiuf/sgo06wssw4wsxxbLj5KqYrhBFn2l Q6OY7DMxKvrlBkZhQKJ9uDwvQA2zHYiPkitlcwIAUKVms2dL3x0DsvVsAyWi/4eD L29LYQGojx/0qKfODboAkrTdCK6kOU8pBBGi8FMdlmDnvjT00gd8WwRuthIkN8gx OI1UpmkE5IfKc47cZcBknWfY+QkySoGhuW2Xsb6poHxvVrDaNyWUX1NTRQeaG0lV pB9jFtWZL+WMfLfzo3cSnWSqFhwlr0tV0rveO/kNadOOzheDw607hsZrcQg5cyOo tuusQtCanukNkhvKNAY= =+iJn -----END PGP SIGNATURE----- Merge tag 'pmdomain-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm Pull pmdomain updates from Ulf Hansson: - Move Kconfig files into the pmdomain subsystem - Drop use of genpd's redundant ->opp_to_performance_state() callback - amlogic: - Add support for the T7 power-domains controller - Fix mask for the second NNA mem power-domain - bcm: Fixup ASB register read and comparison for bcm2835-power - imx: Fix device link problem for consumers of the pgc power-domain - mediatek: Add support for the MT8365 power domains - qcom: - Add support for the rpmhpds for SC8380XP power-domains - Add support for the rpmhpds for SM8650 power-domains - Add support for the rpmhpd clocks for SM7150 - Add support for the rpmpds for MSM8917 (families) power-domains - starfive: Add support for the JH7110 AON PMU * tag 'pmdomain-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm: (56 commits) pmdomain: amlogic: Fix mask for the second NNA mem PD domain pmdomain: qcom: rpmhpd: Add SC8380XP power domains pmdomain: qcom: rpmhpd: Add SM8650 RPMh Power Domains dt-bindings: power: rpmpd: Add SC8380XP support dt-bindings: power: qcom,rpmhpd: Add GMXC PD index dt-bindings: power: qcom,rpmpd: document the SM8650 RPMh Power Domains pmdomain: imx: Make imx pgc power domain also set the fwnode pmdomain: qcom: rpmpd: Add QM215 power domains pmdomain: qcom: rpmpd: Add MSM8917 power domains dt-bindings: power: rpmpd: Add MSM8917, MSM8937 and QM215 pmdomain: bcm: bcm2835-power: check if the ASB register is equal to enable pmdomain: qcom: rpmhpd: Drop the ->opp_to_performance_state() callback pmdomain: qcom: rpmpd: Drop the ->opp_to_performance_state() callback pmdomain: qcom: cpr: Drop the ->opp_to_performance_state() callback pmdomain: Use device_get_match_data() pmdomain: ti: add missing of_node_put pmdomain: mediatek: Add support for MT8365 pmdomain: mediatek: Add support for MTK_SCPD_STRICT_BUS_PROTECTION cap pmdomain: mediatek: Add support for WAY_EN operations pmdomain: mediatek: Unify configuration for infracfg and smi ... |
||
Linus Torvalds
|
40aa597c4a |
MMC core:
- Enable host caps to be modified via debugfs to test speed-modes - Improve random I/O writes for 4k buffers for hsq enabled hosts MMC host: - atmel-mci/sdhci-of-at91: Aubin Constans takes over as maintainer - dw_mmc-starfive: Re-work tuning support - meson-gx: Fix bogus IRQ when using CMD_CFG_ERROR - mmci: Use peripheral flow control for the STM32 variant - renesas,sdhi: Add support for the RZ/G3S variant - sdhci-esdhc-imx: Optimize the manual tuning logic - sdhci-msm: Add support for the SM8650 variant - sdhci-npcm: Add driver to support the Nuvoton NPCM BMC variant - sdhci-pci-gli: Add workaround to allow GL9750 to enter ASPM L1.2 -----BEGIN PGP SIGNATURE----- iQJLBAABCgA1FiEEugLDXPmKSktSkQsV/iaEJXNYjCkFAmVCJrIXHHVsZi5oYW5z c29uQGxpbmFyby5vcmcACgkQ/iaEJXNYjCnysBAApP9xUqojSse1lrVxLnAayMlz h7zhkaAlagv4pkUTfYvkUVCJfGs23j7Icdu7+oFyxKBdxHX0hTQqASJJMlXRtObk SIzEBtky3kL3lS2i9FAZ4RKBtZh8palai439Nv15569idiy4vpIFaMUJtTSp/xpm fmloT3Evu3pOFCRFut2mgSIG7S9L4aI/+c5RgWuDQBtirpU7TzgKW4GaPm/sWcrG WfgJ+3tu2/0tZkpuCNf0hYAI7GZUTePZrXuFdZhm0TI32jGY4VBCdJ8HLVmFdnKz JZoGv9fd3JPoMwjR4wEkh41lxcGZpB6DYWi9iQvQPBbHkromhlZwNEJ6xt+j6zOq /T1POAsAc5Tw8bfxqlI0jZFkKhpq5uI8Yg4lWGmR4yOhaaih3wXCVSK4CBETa19O jUSRz5zrfYhbvOIWclHILkYEMlmwUbCjn+3iMrNkINQUkejVdqW8A3o/AyCVgdD/ 6FdQv9IjkdQ1+2JmQB41av3Zb0yJ5j8XcmLQp7WofJpZy0GLdr/JxqXUOSPaR3YY Mz9A0aq8CY9q9PLtEqtIJo66se/fMMMveS/43sHxEmgixjIOBcrN0fap/OSmitEe vhR7X3gglMUq/VEVSxx9A4S/g2Lm60gq0piMRd3TlyL1ZW/7CxCi61rafa6BUMn+ MGDbMnTxZk837fBbaU8= =Qcl9 -----END PGP SIGNATURE----- Merge tag 'mmc-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc Pull MMC updates from Ulf Hansson: " MMC core: - Enable host caps to be modified via debugfs to test speed-modes - Improve random I/O writes for 4k buffers for hsq enabled hosts MMC host: - atmel-mci/sdhci-of-at91: Aubin Constans takes over as maintainer - dw_mmc-starfive: Re-work tuning support - meson-gx: Fix bogus IRQ when using CMD_CFG_ERROR - mmci: Use peripheral flow control for the STM32 variant - renesas,sdhi: Add support for the RZ/G3S variant - sdhci-esdhc-imx: Optimize the manual tuning logic - sdhci-msm: Add support for the SM8650 variant - sdhci-npcm: Add driver to support the Nuvoton NPCM BMC variant - sdhci-pci-gli: Add workaround to allow GL9750 to enter ASPM L1.2" * tag 'mmc-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (25 commits) dt-bindings: mmc: sdhci-msm: document the SM8650 SDHCI Controller mmc: meson-gx: Remove setting of CMD_CFG_ERROR MAINTAINERS: mmc: take over as maintainer of MCI & SDHCI MICROCHIP DRIVERS mmc: jz4740: Use device_get_match_data() mmc: sdhci-npcm: Add NPCM SDHCI driver dt-bindings: mmc: npcm,sdhci: Document NPCM SDHCI controller mmc: sdhci-pltfm: Make driver OF independent mmc: sdhci-pltfm: Drop unnecessary error messages in sdhci_pltfm_init() mmc: sdhci-pci: Switch to use acpi_evaluate_dsm_typed() mmc: debugfs: Allow host caps to be modified mmc: core: Always reselect card type mmc: mmci: use peripheral flow control for STM32 mmc: vub300: replace deprecated strncpy with strscpy memstick: jmb38x_ms: Annotate struct jmb38x_ms with __counted_by mmc: starfive: Change tuning implementation dt-bindings: mmc: starfive: Remove properties from required mmc: hsq: Improve random I/O write performance for 4k buffers mmc: core: Allow dynamical updates of the number of requests for hsq mmc: sdhci-pci-gli: A workaround to allow GL9750 to enter ASPM L1.2 dt-bindings: mmc: renesas,sdhi: Document RZ/G3S support ... |
||
Linus Torvalds
|
39714efc23 |
ATA changes for 6.7-rc1
- Modify the AHCI driver to print the link power management policy used on scan, to help with debugging issues (Niklas). - Add support for the ASM2116 series adapters to the AHCI driver (Szuying). - Prepare libata for the coming gcc and Clang __counted_by attribute (Kees). - Following the recent estensive fixing of libata suspend/resume handling, several patches further cleanup and improve disk power state management (from me). - Reduce the verbosity of some error messages for non-fatal temporary errors, e.g. slow response to device reset when scanning a port, and warning messages that are in fact normal, e.g. disabling a device on suspend or when removing it (from me). - Cleanup DMA helper functions (from me). - Fix sata_mv drive handling of potential errors durring probe (Ma). - Cleanup the xgene and imx drivers using the functions of_device_get_match_data() and device_get_match_data() (Rob). - Improve the tegra driver device tree (Rob). -----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQSRPv8tYSvhwAzJdzjdoc3SxdoYdgUCZT9PtwAKCRDdoc3SxdoY diCGAQCbSOB3PCpsm1cCMevZeEbt+zUSx+sj6twR12RohtQK6wEA1rEytQllZyqa Pk/jIH2UYZaf+lVuV3Vbey4rwDYXTQs= =V53T -----END PGP SIGNATURE----- Merge tag 'ata-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata Pull ATA updates from Damien Le Moal: - Modify the AHCI driver to print the link power management policy used on scan, to help with debugging issues (Niklas) - Add support for the ASM2116 series adapters to the AHCI driver (Szuying) - Prepare libata for the coming gcc and Clang __counted_by attribute (Kees) - Following the recent estensive fixing of libata suspend/resume handling, several patches further cleanup and improve disk power state management (me) - Reduce the verbosity of some error messages for non-fatal temporary errors, e.g. slow response to device reset when scanning a port, and warning messages that are in fact normal, e.g. disabling a device on suspend or when removing it (me) - Cleanup DMA helper functions (me) - Fix sata_mv drive handling of potential errors durring probe (Ma) - Cleanup the xgene and imx drivers using the functions of_device_get_match_data() and device_get_match_data() (Rob) - Improve the tegra driver device tree (Rob) * tag 'ata-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata: (22 commits) dt-bindings: ata: tegra: Disallow undefined properties ata: libata-core: Improve ata_dev_power_set_active() ata: libata-eh: Spinup disk on resume after revalidation ata: imx: Use device_get_match_data() ata: xgene: Use of_device_get_match_data() ata: sata_mv: aspeed: fix value check in mv_platform_probe() ata: ahci: Add Intel Alder Lake-P AHCI controller to low power chipsets list ata: libata: Cleanup inline DMA helper functions ata: libata-eh: Reduce "disable device" message verbosity ata: libata-eh: Improve reset error messages ata: libata-sata: Improve ata_sas_slave_configure() ata: libata-core: Do not resume runtime suspended ports ata: libata-core: Do not poweroff runtime suspended ports ata: libata-core: Remove ata_port_resume_async() ata: libata-core: Remove ata_port_suspend_async() ata: libata-core: Detach a port devices on shutdown ata: libata-core: Synchronize ata_port_detach() with hotplug ata: libata-scsi: Cleanup ata_scsi_start_stop_xlat() scsi: Remove scsi device no_start_on_resume flag ata: libata: Annotate struct ata_cpr_log with __counted_by ... |
||
Tom Yang
|
9e1b016a0b |
Documentation: maple_tree: fix word spelling error
The "first" is spelled "fist". Link: https://lkml.kernel.org/r/20231023095737.21823-1-yangqixiao@inspur.com Signed-off-by: Tom Yang <yangqixiao@inspur.com> Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
Andrey Konovalov
|
9fb2047d23 |
Documentation: ubsan: drop "the" from article title
Drop "the" from the title of the documentation article for UBSAN, as it is redundant. Also add SPDX-License-Identifier for ubsan.rst. Link: https://lkml.kernel.org/r/5fb11a4743eea9d9232a5284dea0716589088fec.1698161845.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Reviewed-by: Marco Elver <elver@google.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
Linus Torvalds
|
56ec8e4cd8 |
arm64 updates for 6.7:
* Major refactoring of the CPU capability detection logic resulting in the removal of the cpus_have_const_cap() function and migrating the code to "alternative" branches where possible * Backtrace/kgdb: use IPIs and pseudo-NMI * Perf and PMU: - Add support for Ampere SoC PMUs - Multi-DTC improvements for larger CMN configurations with multiple Debug & Trace Controllers - Rework the Arm CoreSight PMU driver to allow separate registration of vendor backend modules - Fixes: add missing MODULE_DEVICE_TABLE to the amlogic perf driver; use device_get_match_data() in the xgene driver; fix NULL pointer dereference in the hisi driver caused by calling cpuhp_state_remove_instance(); use-after-free in the hisi driver * HWCAP updates: - FEAT_SVE_B16B16 (BFloat16) - FEAT_LRCPC3 (release consistency model) - FEAT_LSE128 (128-bit atomic instructions) * SVE: remove a couple of pseudo registers from the cpufeature code. There is logic in place already to detect mismatched SVE features * Miscellaneous: - Reduce the default swiotlb size (currently 64MB) if no ZONE_DMA bouncing is needed. The buffer is still required for small kmalloc() buffers - Fix module PLT counting with !RANDOMIZE_BASE - Restrict CPU_BIG_ENDIAN to LLVM IAS 15.x or newer move synchronisation code out of the set_ptes() loop - More compact cpufeature displaying enabled cores - Kselftest updates for the new CPU features -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEE5RElWfyWxS+3PLO2a9axLQDIXvEFAmU7/QUACgkQa9axLQDI XvEx3xAAjICmHm+ryKJxS1IGXLYu2DXMcHUjeW6w1SxkK/vKhTMlHRx/CIWDze2l eENu7TcDLtTw+Gv9kqg30TSwzLfJhP9oFpX2T5TKkh5qlJlbz8fBtm+as14DTLCZ p2sra3J0w4B5JwTVqnj2RHOlEftMKvbyLGRkz3ve6wIUbsp5pXMkxAd/k3wOf0lC m6d9w1OMA2sOsw9YCgjcCNQGEzFMJk+13w7K+4w6A8Djn/Jxkt4fAFVn2ZlCiZzD NA2lTDWJqGmeGHo3iFdCTensWXmWTqjzxsNEf7PyBk5mBOdzDVxlTfEL7vnJg7gf BlTQ/nhIpra7rHQ9q2rwqEzbF+4Tn3uWlQfdDb7+/4goPjDh7tlBhEOYyOwTCEIT 0t9cCSvBmSCKeXC3lKWWtJ+QJKhZHSmXN84EotTs65KyyfIsi4RuSezvV/+aIL86 06sHYlYxETuujZP1cgOjf69Wsdsgizx0mqXJXf/xOjp22HFDcL4Bki6Rgi6t5OZj GEHG15kSE+eJ+RIpxpuAN8fdrlxYubsVLIksCqK7cZf9zXbQGIlifKAIrYiEx6kz FD+o+j/5niRWR6yJZCtCcGxqpSlwnYWPqc1Ds0GES8A/BphWMPozXUAZ0ll4Fnp1 yyR2/Due/eBsCNESn579kP8989rashubB8vxvdx2fcWVtLC7VgE= =QaEo -----END PGP SIGNATURE----- Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 updates from Catalin Marinas: "No major architecture features this time around, just some new HWCAP definitions, support for the Ampere SoC PMUs and a few fixes/cleanups. The bulk of the changes is reworking of the CPU capability checking code (cpus_have_cap() etc). - Major refactoring of the CPU capability detection logic resulting in the removal of the cpus_have_const_cap() function and migrating the code to "alternative" branches where possible - Backtrace/kgdb: use IPIs and pseudo-NMI - Perf and PMU: - Add support for Ampere SoC PMUs - Multi-DTC improvements for larger CMN configurations with multiple Debug & Trace Controllers - Rework the Arm CoreSight PMU driver to allow separate registration of vendor backend modules - Fixes: add missing MODULE_DEVICE_TABLE to the amlogic perf driver; use device_get_match_data() in the xgene driver; fix NULL pointer dereference in the hisi driver caused by calling cpuhp_state_remove_instance(); use-after-free in the hisi driver - HWCAP updates: - FEAT_SVE_B16B16 (BFloat16) - FEAT_LRCPC3 (release consistency model) - FEAT_LSE128 (128-bit atomic instructions) - SVE: remove a couple of pseudo registers from the cpufeature code. There is logic in place already to detect mismatched SVE features - Miscellaneous: - Reduce the default swiotlb size (currently 64MB) if no ZONE_DMA bouncing is needed. The buffer is still required for small kmalloc() buffers - Fix module PLT counting with !RANDOMIZE_BASE - Restrict CPU_BIG_ENDIAN to LLVM IAS 15.x or newer move synchronisation code out of the set_ptes() loop - More compact cpufeature displaying enabled cores - Kselftest updates for the new CPU features" * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (83 commits) arm64: Restrict CPU_BIG_ENDIAN to GNU as or LLVM IAS 15.x or newer arm64: module: Fix PLT counting when CONFIG_RANDOMIZE_BASE=n arm64, irqchip/gic-v3, ACPI: Move MADT GICC enabled check into a helper perf: hisi: Fix use-after-free when register pmu fails drivers/perf: hisi_pcie: Initialize event->cpu only on success drivers/perf: hisi_pcie: Check the type first in pmu::event_init() arm64: cpufeature: Change DBM to display enabled cores arm64: cpufeature: Display the set of cores with a feature perf/arm-cmn: Enable per-DTC counter allocation perf/arm-cmn: Rework DTC counters (again) perf/arm-cmn: Fix DTC domain detection drivers: perf: arm_pmuv3: Drop some unused arguments from armv8_pmu_init() drivers: perf: arm_pmuv3: Read PMMIR_EL1 unconditionally drivers/perf: hisi: use cpuhp_state_remove_instance_nocalls() for hisi_hns3_pmu uninit process clocksource/drivers/arm_arch_timer: limit XGene-1 workaround arm64: Remove system_uses_lse_atomics() arm64: Mark the 'addr' argument to set_ptes() and __set_pte_at() as unused drivers/perf: xgene: Use device_get_match_data() perf/amlogic: add missing MODULE_DEVICE_TABLE arm64/mm: Hoist synchronization out of set_ptes() loop ... |
||
Linus Torvalds
|
7d461b291e |
drm for 6.7-rc1
kernel: - add initial vmemdup-user-array core: - fix platform remove() to return void - drm_file owner updated to reflect owner - move size calcs to drm buddy allocator - let GPUVM build as a module - allow variable number of run-queues in scheduler edid: - handle bad h/v sync_end in EDIDs panfrost: - add Boris as maintainer fbdev: - use fb_ops helpers more - only allow logo use from fbcon - rename fb_pgproto to pgprot_framebuffer - add HPD state to drm_connector_oob_hotplug_event - convert to fbdev i/o mem helpers i915: - Enable meteorlake by default - Early Xe2 LPD/Lunarlake display enablement - Rework subplatforms into IP version checks - GuC based TLB invalidation for Meteorlake - Display rework for future Xe driver integration - LNL FBC features - LNL display feature capability reads - update recommended fw versions for DG2+ - drop fastboot module parameter - added deviceid for Arrowlake-S - drop preproduction workarounds - don't disable preemption for resets - cleanup inlines in headers - PXP firmware loading fix - Fix sg list lengths - DSC PPS state readout/verification - Add more RPL P/U PCI IDs - Add new DG2-G12 stepping - DP enhanced framing support to state checker - Improve shared link bandwidth management - stop using GEM macros in display code - refactor related code into display code - locally enable W=1 warnings - remove PSR watchdog timers on LNL amdgpu: - RAS/FRU EEPROM updatse - IP discovery updatses - GC 11.5 support - DCN 3.5 support - VPE 6.1 support - NBIO 7.11 support - DML2 support - lots of IP updates - use flexible arrays for bo list handling - W=1 fixes - Enable seamless boot in more cases - Enable context type property for HDMI - Rework GPUVM TLB flushing - VCN IB start/size alignment fixes amdkfd: - GC 10/11 fixes - GC 11.5 support - use partial migration in GPU faults radeon: - W=1 Fixes - fix some possible buffer overflow/NULL derefs nouveau: - update uapi for NO_PREFETCH - scheduler/fence fixes - rework suspend/resume for GSP-RM - rework display in preparation for GSP-RM habanalabs: - uapi: expose tsc clock - uapi: block access to eventfd through control device - uapi: force dma-buf export to PAGE_SIZE alignments - complete move to accel subsystem - move firmware interface include files - perform hard reset on PCIe AXI drain event - optimise user interrupt handling msm: - DP: use existing helpers for DPCD - DPU: interrupts reworked - gpu: a7xx (a730/a740) support - decouple msm_drv from kms for headless devices mediatek: - MT8188 dsi/dp/edp support - DDP GAMMA - 12 bit LUT support - connector dynamic selection capability rockchip: - rv1126 mipi-dsi/vop support - add planar formats ast: - rename constants panels: - Mitsubishi AA084XE01 - JDI LPM102A188A - LTK050H3148W-CTA6 ivpu: - power management fixes qaic: - add detach slice bo api komeda: - add NV12 writeback tegra: - support NVSYNC/NHSYNC - host1x suspend fixes ili9882t: - separate into own driver -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEEEKbZHaGwW9KfbeusDHTzWXnEhr4FAmVAgzYACgkQDHTzWXnE hr7ZEQ//UXne3tyGOsU3X8r+lstLFDMa90a3hvTg6hX+Q0MjHd/clwkKFkLpkipL n7gIZlaHl11dRs0FzrIZA5EVAAgjMLKmIl10NBDFec6ZFA3VERcggx8y61uifI15 VviMR1VbLHYZaCdyrQOK0A4wcktWnKXyoXp7cwy9crdc2GOBMUZkdIqtvD7jHxQx UMIFnzi1CyKUX/Fjt/JceYcNk9y2ZGkzakYO3sHcUdv4DPu9qX4kNzpjF691AZBP UeKWvCswTRVg2M0kuo/RYIBzqaTmOlk6dHLWBognIeZPyuyhCcaGC2d64c6tShwQ dtHdi+IgyQ8s2qb350ymKTQUP7xA/DfZBwH7LvrZALBxeQGYQN1CnsgDMOS2wcUc XrRFiS7PxEOtMMBctcPBnnoV5ttnsLLlPpzM9puh9sUFMn6CgLzcAMqXdqxzMajH +dz2aD1N0vMqq4varozOg9SC2QamgUiPN/TQfrulhCTCfQaXczy5x1OYiIz65+Sl mKoe2WASuP9Ve8do4N/wEwH5SZY2ItipBdUTRxttY9NTanmV0X5DjZBXH5b9XGci Zl5Ar613f9zwm5T5BVA5k6s3ZbGY6QcP5pDNTCPaSgitfFXIdReBZ2CaYzK3MPg/ Wit/TXrud9yT6VPpI1igboMyasf5QubV1MY1K83kOCWr9u8R2CM= =l79u -----END PGP SIGNATURE----- Merge tag 'drm-next-2023-10-31-1' of git://anongit.freedesktop.org/drm/drm Pull drm updates from Dave Airlie: "Highlights: - AMD adds some more upcoming HW platforms - Intel made Meteorlake stable and started adding Lunarlake - nouveau has a bunch of display rework in prepartion for the NVIDIA GSP firmware support - msm adds a7xx support - habanalabs has finished migration to accel subsystem Detail summary: kernel: - add initial vmemdup-user-array core: - fix platform remove() to return void - drm_file owner updated to reflect owner - move size calcs to drm buddy allocator - let GPUVM build as a module - allow variable number of run-queues in scheduler edid: - handle bad h/v sync_end in EDIDs panfrost: - add Boris as maintainer fbdev: - use fb_ops helpers more - only allow logo use from fbcon - rename fb_pgproto to pgprot_framebuffer - add HPD state to drm_connector_oob_hotplug_event - convert to fbdev i/o mem helpers i915: - Enable meteorlake by default - Early Xe2 LPD/Lunarlake display enablement - Rework subplatforms into IP version checks - GuC based TLB invalidation for Meteorlake - Display rework for future Xe driver integration - LNL FBC features - LNL display feature capability reads - update recommended fw versions for DG2+ - drop fastboot module parameter - added deviceid for Arrowlake-S - drop preproduction workarounds - don't disable preemption for resets - cleanup inlines in headers - PXP firmware loading fix - Fix sg list lengths - DSC PPS state readout/verification - Add more RPL P/U PCI IDs - Add new DG2-G12 stepping - DP enhanced framing support to state checker - Improve shared link bandwidth management - stop using GEM macros in display code - refactor related code into display code - locally enable W=1 warnings - remove PSR watchdog timers on LNL amdgpu: - RAS/FRU EEPROM updatse - IP discovery updatses - GC 11.5 support - DCN 3.5 support - VPE 6.1 support - NBIO 7.11 support - DML2 support - lots of IP updates - use flexible arrays for bo list handling - W=1 fixes - Enable seamless boot in more cases - Enable context type property for HDMI - Rework GPUVM TLB flushing - VCN IB start/size alignment fixes amdkfd: - GC 10/11 fixes - GC 11.5 support - use partial migration in GPU faults radeon: - W=1 Fixes - fix some possible buffer overflow/NULL derefs nouveau: - update uapi for NO_PREFETCH - scheduler/fence fixes - rework suspend/resume for GSP-RM - rework display in preparation for GSP-RM habanalabs: - uapi: expose tsc clock - uapi: block access to eventfd through control device - uapi: force dma-buf export to PAGE_SIZE alignments - complete move to accel subsystem - move firmware interface include files - perform hard reset on PCIe AXI drain event - optimise user interrupt handling msm: - DP: use existing helpers for DPCD - DPU: interrupts reworked - gpu: a7xx (a730/a740) support - decouple msm_drv from kms for headless devices mediatek: - MT8188 dsi/dp/edp support - DDP GAMMA - 12 bit LUT support - connector dynamic selection capability rockchip: - rv1126 mipi-dsi/vop support - add planar formats ast: - rename constants panels: - Mitsubishi AA084XE01 - JDI LPM102A188A - LTK050H3148W-CTA6 ivpu: - power management fixes qaic: - add detach slice bo api komeda: - add NV12 writeback tegra: - support NVSYNC/NHSYNC - host1x suspend fixes ili9882t: - separate into own driver" * tag 'drm-next-2023-10-31-1' of git://anongit.freedesktop.org/drm/drm: (1803 commits) drm/amdgpu: Remove unused variables from amdgpu_show_fdinfo drm/amdgpu: Remove duplicate fdinfo fields drm/amd/amdgpu: avoid to disable gfxhub interrupt when driver is unloaded drm/amdgpu: Add EXT_COHERENT support for APU and NUMA systems drm/amdgpu: Retrieve CE count from ce_count_lo_chip in EccInfo table drm/amdgpu: Identify data parity error corrected in replay mode drm/amdgpu: Fix typo in IP discovery parsing drm/amd/display: fix S/G display enablement drm/amdxcp: fix amdxcp unloads incompletely drm/amd/amdgpu: fix the GPU power print error in pm info drm/amdgpu: Use pcie domain of xcc acpi objects drm/amd: check num of link levels when update pcie param drm/amdgpu: Add a read to GFX v9.4.3 ring test drm/amd/pm: call smu_cmn_get_smc_version in is_mode1_reset_supported. drm/amdgpu: get RAS poison status from DF v4_6_2 drm/amdgpu: Use discovery table's subrevision drm/amd/display: 3.2.256 drm/amd/display: add interface to query SubVP status drm/amd/display: Read before writing Backlight Mode Set Register drm/amd/display: Disable SYMCLK32_SE RCO on DCN314 ... |
||
Masahiro Yamada
|
5f56cb030e |
kbuild: support 'userldlibs' syntax
This syntax is useful to specify libraries linked to all userspace programs in the Makefile. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> |
||
André Apitzsch
|
000b1eab4f |
dt-bindings: leds: Add Kinetic KTD2026/2027 LED
Document Kinetic KTD2026/2027 LED driver devicetree bindings. Signed-off-by: André Apitzsch <git@apitzsch.eu> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20231002-ktd202x-v6-1-26be8eefeb88@apitzsch.eu Signed-off-by: Lee Jones <lee@kernel.org> |
||
Ondrej Jirman
|
43962eb5de |
dt-bindings: leds: Last color ID is now 14 (LED_COLOR_ID_LIME)
Increase the limit to match available values in dt-bindings/leds/common.h Fixes: 472d7b9e8141 ("dt-bindings: leds: Expand LED_COLOR_ID definitions") Signed-off-by: Ondrej Jirman <megi@xff.cz> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20231008142103.1174028-1-megi@xff.cz Signed-off-by: Lee Jones <lee@kernel.org> |
||
Linus Walleij
|
f9be4d5bb6 |
dt-bindings: leds: Mention GPIO triggers
We reuse the trigger-sources phandle to just point to GPIOs we may want to use as LED triggers. Example: gpio: gpio@0 { compatible "my-gpio"; gpio-controller; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; #trigger-source-cells = <2>; }; leds { compatible = "gpio-leds"; led-my-gpio { label = "device:blue:myled"; gpios = <&gpio 0 GPIO_ACTIVE_HIGH>; default-state = "off"; linux,default-trigger = "gpio"; trigger-sources = <&gpio 1 GPIO_ACTIVE_HIGH>; }; }; Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20230926-gpio-led-trigger-dt-v2-2-e06e458b788e@linaro.org Signed-off-by: Lee Jones <lee@kernel.org> |
||
Marek Behún
|
43e9082fbc |
leds: turris-omnia: Add support for enabling/disabling HW gamma correction
If the MCU on Turris Omnia is running newer firmware versions, the LED controller supports RGB gamma correction (and enables it by default for newer boards). Determine whether the gamma correction setting feature is supported and add the ability to set it via sysfs attribute file. Signed-off-by: Marek Behún <kabel@kernel.org> Link: https://lore.kernel.org/r/20230918161104.20860-5-kabel@kernel.org Signed-off-by: Lee Jones <lee@kernel.org> |
||
Rob Herring
|
36af195f7f |
dt-bindings: mfd: armltd: Move Arm board syscon's to separate schema
The Arm Ltd board bindings are a bit unusual in that they define child nodes for various syscon's. The schemas are also incomplete as they lack constraints on having additional properties and some properties are missing. As the bindings for the different platforms only vary by compatibles, combine them into a single schema doc. Add the "arm,im-pd1-syscon" compatible which was not documented. Add "ranges", "#address-cells", and "#size-cells properties which were missing. With this, fix the error exposed in the register-bit-led binding. Signed-off-by: Rob Herring <robh@kernel.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20231020142252.3113716-2-robh@kernel.org Signed-off-by: Lee Jones <lee@kernel.org> |
||
Ondrej Jirman
|
f0eb624455 |
dt-bindings: mfd: rk806: Allow system-power-controller property
Declare support for this property. Signed-off-by: Ondrej Jirman <megi@xff.cz> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Link: https://lore.kernel.org/r/20231019165732.3818789-3-megi@xff.cz Signed-off-by: Lee Jones <lee@kernel.org> |
||
Ondrej Jirman
|
961748bb15 |
dt-bindings: mfd: rk8xx: Deprecate rockchip,system-power-controller
Deprecate support for this property in favor of standard system-power-controller one. Signed-off-by: Ondrej Jirman <megi@xff.cz> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Link: https://lore.kernel.org/r/20231019165732.3818789-2-megi@xff.cz Signed-off-by: Lee Jones <lee@kernel.org> |
||
Sebastian Reichel
|
93fae36e03 |
dt-bindings: mfd: max8925: Convert to DT schema format
Convert the binding to DT schema format. The sub-functions of this MFD device do not have their own compatible string and are thus described directly in the MFD binding document after being converted to YAML. Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20231023131409.1796451-1-sebastian.reichel@collabora.com Signed-off-by: Lee Jones <lee@kernel.org> |
||
Russ Weight
|
fe74f7a966 |
mfd: intel-m10-bmc: Change contact for ABI docs
Change ABI documentation contact information from Russ Weight to Peter Colberg. Signed-off-by: Russ Weight <russell.h.weight@intel.com> Acked-by: Peter Colberg <peter.colberg@intel.com> Link: https://lore.kernel.org/r/20230928164738.278635-1-russell.h.weight@intel.com Signed-off-by: Lee Jones <lee@kernel.org> |
||
Luca Weiss
|
aaca37ae36 |
dt-bindings: mfd: qcom,spmi-pmic: Drop unused labels from examples
There's not much point in having unused labels in the binding example, so drop them. This patch was originally motivated by ea25d61b448a ("arm64: dts: qcom: Use plural _gpios node label for PMIC gpios") updating all dts files to use the plural _gpios label instead of the singular _gpio as label but this example wasn't updated. But since we should just drop the label alltogether, do that. Signed-off-by: Luca Weiss <luca.weiss@fairphone.com> Acked-by: Conor Dooley <conor.dooley@microchip.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20231002-pm7250b-gpio-fixup-v2-1-debb8b599989@fairphone.com Signed-off-by: Lee Jones <lee@kernel.org> |