- Clear bridge Secondary Status errors after enumeration since enumeration
causes many errors (Vidya Sagar)
- Wait for Link Training==0 before starting Link retrain to avoid a race;
this was done previously but broken by a faulty merge (Ilpo Järvinen)
- Rename PCI_IRQ_LEGACY to PCI_IRQ_INTX to be more specific about what
"LEGACY" means (Damien Le Moal)
- Update return types of pci_find_capability() stubs to match the extern
declarations for the actual implementations (Bjorn Helgaas)
- Drop unnecessary pci_enable_device_io() from pata_cs5520 (Heiner
Kallweit)
- Drop unused pci_enable_device_io() (Heiner Kallweit)
- On 2016 and newer BIOSes, skip early E820 check for ECAM regions
described in ACPI MCFG; there's no spec requirement for E820
reservations, and some machines don't provide them (Bjorn Helgaas)
- If devices were disconnected while suspended, don't wait for them when
resuming (Ilpo Järvinen)
* pci/enumeration:
PCI: Do not wait for disconnected devices when resuming
x86/pci: Skip early E820 check for ECAM region
PCI: Remove unused pci_enable_device_io()
ata: pata_cs5520: Remove unnecessary call to pci_enable_device_io()
PCI: Update pci_find_capability() stub return types
PCI: Remove PCI_IRQ_LEGACY
scsi: vmw_pvscsi: Do not use PCI_IRQ_LEGACY instead of PCI_IRQ_LEGACY
scsi: pmcraid: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
scsi: mpt3sas: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
scsi: megaraid_sas: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
scsi: ipr: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
scsi: hpsa: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
scsi: arcmsr: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
wifi: rtw89: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
wifi: rtw88: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
wifi: ath10k: Refer to INTX instead of LEGACY
net: wangxun: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
r8169: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
net: alx: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
net: atlantic: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
net: amd-xgbe: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
VMCI: Use PCI_IRQ_ALL_TYPES to remove PCI_IRQ_LEGACY use
RDMA/vmw_pvrdma: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
IB/qib: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
drm/amdgpu: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
mfd: intel-lpss: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
ntb: idt: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
platform/x86: intel_ips: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
tty: 8250_pci: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
usb: hcd-pci: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
ASoC: Intel: avs: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
Documentation: PCI: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
PCI/portdrv: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
PCI/MSI: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
PCI: Clarify intent of LT wait
PCI: Wait for Link Training==0 before starting Link retrain
PCI: Clear Secondary Status errors after enumeration
- Specify Revision 6 of the "Enable DPC" _DSM function to match the
implementation (Kuppuswamy Sathyanarayanan)
- Check for failure of the "Locate Port" _DSM function (Kuppuswamy
Sathyanarayanan)
* pci/edr:
PCI/EDR: Align EDR_PORT_LOCATE_DSM with PCI Firmware r3.3
PCI/EDR: Align EDR_PORT_DPC_ENABLE_DSM with PCI Firmware r3.3
- Lock the upstream bridge while using it to perform a Secondary Bus Reset
(Dave Jiang)
- Return failure when attempting Secondary Bus Reset below a CXL Port that
has SBR masked (Dave Jiang)
- Add a "cxl_bus" reset method that temporarily unmasks SBR (Dave Jiang)
- Add a warning if we reset a CXL type 3 memory device that was in use
while being reset (Dave Jiang)
* pci/cxl:
cxl: Add post-reset warning if reset results in loss of previously committed HDM decoders
PCI/CXL: Add 'cxl_bus' reset method for devices below CXL Ports
PCI/CXL: Fail bus reset if upstream CXL Port has SBR masked
PCI: Lock upstream bridge for pci_reset_function()
PCI/CXL: Move CXL Vendor ID to pci_ids.h
- Mask reporting of Mask Replay Timer Timeout Correctable Errors in the
bridge above Genesys GL975x SD host controllers; the errors are caused by
a GL975x hardware defect and they may lead to AER interrupts that prevent
system suspend (Kai-Heng Feng)
- Update URL of aer-inject tool (Kuppuswamy Sathyanarayanan)
* pci/aer:
PCI/AER: Update aer-inject tool source URL
PCI: Mask Replay Timer Timeout errors for Genesys GL975x SD host controller
On runtime resume, pci_dev_wait() is called:
pci_pm_runtime_resume()
pci_pm_bridge_power_up_actions()
pci_bridge_wait_for_secondary_bus()
pci_dev_wait()
While a device is runtime suspended along with its PCI hierarchy, the
device could get disconnected. In such case, the link will not come up no
matter how long pci_dev_wait() waits for it.
Besides the above mentioned case, there could be other ways to get the
device disconnected while pci_dev_wait() is waiting for the link to come
up.
Make pci_dev_wait() exit if the device is already disconnected to avoid
unnecessary delay.
The use cases of pci_dev_wait() boil down to two:
1. Waiting for the device after reset
2. pci_bridge_wait_for_secondary_bus()
The callers in both cases seem to benefit from propagating the
disconnection as error even if device disconnection would be more
analoguous to the case where there is no device in the first place which
return 0 from pci_dev_wait(). In the case 2, it results in unnecessary
marking of the devices disconnected again but that is just harmless extra
work.
Also make sure compiler does not become too clever with dev->error_state
and use READ_ONCE() to force a fetch for the up-to-date value.
Link: https://lore.kernel.org/r/20240208132322.4811-1-ilpo.jarvinen@linux.intel.com
Reported-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Arul, Mateusz, Imcarneiro91, and Aman reported a regression caused by
07eab0901ede ("efi/x86: Remove EfiMemoryMappedIO from E820 map"). On the
Lenovo Legion 9i laptop, that commit removes the ECAM area from E820, which
means the early E820 validation fails, which means we don't enable ECAM in
the "early MCFG" path.
The static MCFG table describes ECAM without depending on the ACPI
interpreter. Many Legion 9i ACPI methods rely on that, so they fail when
PCI config access isn't available, resulting in the embedded controller,
PS/2, audio, trackpad, and battery devices not being detected. The _OSC
method also fails, so Linux can't take control of the PCIe hotplug, PME,
and AER features:
# pci_mmcfg_early_init()
PCI: ECAM [mem 0xc0000000-0xce0fffff] (base 0xc0000000) for domain 0000 [bus 00-e0]
PCI: not using ECAM ([mem 0xc0000000-0xce0fffff] not reserved)
ACPI Error: AE_ERROR, Returned by Handler for [PCI_Config] (20230628/evregion-300)
ACPI: Interpreter enabled
ACPI: Ignoring error and continuing table load
ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PC00.RP01._SB.PC00], AE_NOT_FOUND (20230628/dswload2-162)
ACPI Error: AE_NOT_FOUND, During name lookup/catalog (20230628/psobject-220)
ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0010)
ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PC00.RP01._SB.PC00], AE_NOT_FOUND (20230628/dswload2-162)
ACPI Error: AE_NOT_FOUND, During name lookup/catalog (20230628/psobject-220)
...
ACPI Error: Aborting method \_SB.PC00._OSC due to previous error (AE_NOT_FOUND) (20230628/psparse-529)
acpi PNP0A08:00: _OSC: platform retains control of PCIe features (AE_NOT_FOUND)
# pci_mmcfg_late_init()
PCI: ECAM [mem 0xc0000000-0xce0fffff] (base 0xc0000000) for domain 0000 [bus 00-e0]
PCI: [Firmware Info]: ECAM [mem 0xc0000000-0xce0fffff] not reserved in ACPI motherboard resources
PCI: ECAM [mem 0xc0000000-0xce0fffff] is EfiMemoryMappedIO; assuming valid
PCI: ECAM [mem 0xc0000000-0xce0fffff] reserved to work around lack of ACPI motherboard _CRS
Per PCI Firmware r3.3, sec 4.1.2, ECAM space must be reserved by a PNP0C02
resource, but there's no requirement to mention it in E820, so we shouldn't
look at E820 to validate the ECAM space described by MCFG.
In 2006, 946f2ee5c731 ("[PATCH] i386/x86-64: Check that MCFG points to an
e820 reserved area") added a sanity check of E820 to work around buggy MCFG
tables, but that over-aggressive validation causes failures like this one.
Keep the E820 validation check for machines older than 2016, an arbitrary
ten years after 946f2ee5c731, so machines that depend on it don't break.
Skip the early E820 check for 2016 and newer BIOSes since there's no
requirement to describe ECAM in E820.
Link: https://lore.kernel.org/r/20240417204012.215030-2-helgaas@kernel.org
Fixes: 07eab0901ede ("efi/x86: Remove EfiMemoryMappedIO from E820 map")
Reported-by: Mateusz Kaduk <mateusz.kaduk@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218444
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Mateusz Kaduk <mateusz.kaduk@gmail.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Cc: stable@vger.kernel.org
After the last user was removed, remove this PCI core function. It's very
unlikely that we'll see a new device requiring io space access, even though
memory space access is supported.
Link: https://lore.kernel.org/r/213ebf62-53a3-42b7-8518-ecd5cd6d6b08@gmail.com
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
A few lines earlier pcim_enable_device() is called, which includes the
functionality of pci_enable_device_io(). Therefore we can safely remove the
call to pci_enable_device_io().
Link: https://lore.kernel.org/r/5068d0ce-2140-4d3f-b305-e8f0d61eed1f@gmail.com
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Acked-by: Damien Le Moal <dlemoal@kernel.org>
f646c2a0a668 ("PCI: Return u8 from pci_find_capability() and similar") and
ee8b1c478a9f ("PCI: Return u16 from pci_find_ext_capability() and similar")
updated the return type of the extern declarations, but neglected to update
the type of the stubs used when CONFIG_PCI is not enabled.
Update them to match the extern declarations.
Link: https://lore.kernel.org/r/20240327180234.1529164-1-helgaas@kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Replace the last references to PCI_IRQ_LEGACY with PCI_IRQ_INTX in pci.h
header file. With this change, PCI_IRQ_LEGACY is unused and we can remove
its definition.
Link: https://lore.kernel.org/r/20240325070944.3600338-29-dlemoal@kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
In pvscsi_probe(), initialize irq_flag using PCI_IRQ_ALL_TYPES to remove
the use of the deprecated PCI_IRQ_LEGACY macro.
Link: https://lore.kernel.org/r/20240325070944.3600338-28-dlemoal@kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
Use the macro PCI_IRQ_INTX instead of the deprecated PCI_IRQ_LEGACY macro.
Link: https://lore.kernel.org/r/20240325070944.3600338-27-dlemoal@kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
Use the macro PCI_IRQ_INTX instead of the deprecated PCI_IRQ_LEGACY macro.
Link: https://lore.kernel.org/r/20240325070944.3600338-26-dlemoal@kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
Use the macro PCI_IRQ_INTX instead of the deprecated PCI_IRQ_LEGACY macro.
Link: https://lore.kernel.org/r/20240325070944.3600338-25-dlemoal@kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
Use the macro PCI_IRQ_INTX instead of the deprecated PCI_IRQ_LEGACY macro.
Link: https://lore.kernel.org/r/20240325070944.3600338-24-dlemoal@kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
Use the macro PCI_IRQ_INTX instead of the deprecated PCI_IRQ_LEGACY macro.
Link: https://lore.kernel.org/r/20240325070944.3600338-23-dlemoal@kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
Use the macro PCI_IRQ_INTX instead of the deprecated PCI_IRQ_LEGACY macro.
Link: https://lore.kernel.org/r/20240325070944.3600338-22-dlemoal@kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
Use the macro PCI_IRQ_INTX instead of the deprecated PCI_IRQ_LEGACY macro.
Link: https://lore.kernel.org/r/20240325070944.3600338-21-dlemoal@kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
[bhelgaas: split to separate patch]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
The "Downstream Port Containment related Enhancements" ECN of Jan 28, 2019
(document 12888 below), defined the EDR_PORT_LOCATE_DSM function with
Revision ID 5 with a return value encoding (Bits 2:0 = Function, Bits 7:3 =
Device, Bits 15:8 = Bus). When the ECN was integrated into PCI Firmware
r3.3, sec 4.6.13, Bit 31 was added to indicate success or failure.
Check Bit 31 for failure in acpi_dpc_port_get().
Link: https://lore.kernel.org/r/20240501022543.1626025-1-sathyanarayanan.kuppuswamy@linux.intel.com
Link: https://members.pcisig.com/wg/PCI-SIG/document/12888
Fixes: ac1c8e35a326 ("PCI/DPC: Add Error Disconnect Recover (EDR) support")
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
[bhelgaas: split into two patches, update commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Satish Thatchanamurthy <Satish.Thatchanamurt@Dell.com> # one platform
The "Downstream Port Containment related Enhancements" ECN of Jan 28, 2019
(document 12888 below), defined the EDR_PORT_DPC_ENABLE_DSM function with
Revision ID 5 with Arg3 being an integer. But when the ECN was integrated
into PCI Firmware r3.3, sec 4.6.12, it was defined as Revision ID 6 with
Arg3 being a package containing an integer.
The implementation in acpi_enable_dpc() supplies a package as Arg3 (arg4 in
the code), but it previously specified Revision ID 5. Align this with PCI
Firmware r3.3 by using Revision ID 6.
If firmware implemented per the ECN, its Revision 5 function would receive
a package as Arg3 when it expects an integer, so acpi_enable_dpc() would
likely fail. If such firmware exists and lacks a Revision 6 function that
expects a package, we may have to add support for Revision 5.
Link: https://lore.kernel.org/r/20240501022543.1626025-1-sathyanarayanan.kuppuswamy@linux.intel.com
Link: https://members.pcisig.com/wg/PCI-SIG/document/12888
Fixes: ac1c8e35a326 ("PCI/DPC: Add Error Disconnect Recover (EDR) support")
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
[bhelgaas: split into two patches, update commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Satish Thatchanamurthy <Satish.Thatchanamurt@Dell.com> # one platform
Secondary Bus Reset (SBR) is equivalent to a device being hot removed and
inserted again. Doing a SBR on a CXL type 3 device is problematic if the
exported device memory is part of system memory that cannot be offlined.
The event is equivalent to violently ripping out that range of memory from
the kernel. While the hardware requires the "Unmask SBR" bit set in the
Port Control Extensions register and the kernel currently does not unmask
it, user can unmask this bit via setpci or similar tool.
The driver does not have a way to detect whether a reset coming from the
PCI subsystem is a Function Level Reset (FLR) or SBR. The only way to
detect is to note if a decoder is marked as enabled in software but the
decoder control register indicates it's not committed.
Add a helper function to find discrepancy between the decoder software
state versus the hardware register state.
Suggested-by: Dan Williams <dan.j.williams@intel.com>
Link: https://lore.kernel.org/r/20240502165851.1948523-6-dave.jiang@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
By default Secondary Bus Reset (SBR) is masked for CXL Ports (see CXL r3.1,
sec 8.1.5.2).
Add cxl_reset_bus_function() (method "cxl_bus") to set the "Unmask SBR" bit
in the upstream CXL Port before performing the bus reset and restore the
original value afterwards.
This method allows the user to perform a bus reset on a CXL device without
needing to set the "Unmask SBR" bit via a user tool.
Link: https://lore.kernel.org/r/20240502165851.1948523-5-dave.jiang@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
[bhelgaas: simplify commit log, invert condition to avoid negation]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Per CXL spec r3.1, sec 8.1.5.2, the Secondary Bus Reset (SBR) bit in the
Bridge Control register of a CXL port has no effect unless the "Unmask SBR"
bit is set.
Return -ENOTTY if we attempt a bus reset on a device below a CXL Port where
"Unmask SBR" is 0. Otherwise, the bus reset would appear to have succeeded
even though setting the bridge SBR bit had no effect.
Link: https://lore.kernel.org/linux-cxl/20240220203956.GA1502351@bhelgaas/
Link: https://lore.kernel.org/r/20240502165851.1948523-4-dave.jiang@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
[bhelgaas: simplify commit log and comments]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Fix a long-standing locking gap for missing pci_cfg_access_lock() while
manipulating bridge reset registers and configuration during
pci_reset_bus_function().
If there is an upstream bridge, lock it before locking the device itself.
pci_dev_lock() calls pci_cfg_access_lock(), which blocks the writing of PCI
config space by user space.
Add lockdep assertion via pci_dev->cfg_access_lock to verify
pci_dev->block_cfg_access is set.
Co-developed-by: Dan Williams <dan.j.williams@intel.com>
Link: https://lore.kernel.org/r/20240502165851.1948523-3-dave.jiang@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
[bhelgaas: commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Move PCI_DVSEC_VENDOR_ID_CXL in CXL private code to PCI_VENDOR_ID_CXL in
pci_ids.h in order to be utilized in PCI subsystem.
While the CXL Vendor ID (0x1e98) is not listed in the PCI SIG "Member
Companies" database at https://pcisig.com/membership/member-companies, the
SIG has confirmed that it is reserved by CXL.
Link: https://lore.kernel.org/r/20240502165851.1948523-2-dave.jiang@intel.com
Suggested-by: Bjorn Helgaas <helgaas@kernel.org>
Link: https://lore.kernel.org/linux-cxl/20240402172323.GA1818777@bhelgaas/
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
[bhelgaas: update commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
With only one set of defines remaining, state can be almost used as-is to
set ->aspm_disable/default. Only CLKPM and L1 PM substates need special
handling.
Remove unnecessary if conditions that can use the state variable bits
directly. Move ASPM mask calculation into pci_calc_aspm_enable_mask() and
pci_calc_aspm_disable_mask() helpers which makes it easier to alter state
variable directly.
Link: https://lore.kernel.org/r/20240322123952.6384-3-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
The linux/pci.h and aspm.c files define their own sets of link state
related defines which are almost the same.
Consolidate the use of defines into those defined by linux/pci.h and expand
PCIE_LINK_STATE_L0S to match earlier ASPM_STATE_L0S that includes both
upstream and downstream bits. Rename also the defines that are internal to
aspm.c to start with PCIE_LINK_STATE for consistency.
While the PCIE_LINK_STATE_L0S BIT(0) -> (BIT(0) | BIT(1)) transformation is
not 1:1, in practice aspm.c already used ASPM_STATE_L0S that has both bits
enabled except during mapping.
While at it, place the PCIE_LINK_STATE_CLKPM define last to have more
logical grouping.
Use static_assert() to ensure PCIE_LINK_STATE_L0S is strictly equal to the
combination of PCIE_LINK_STATE_L0S_UP/DW.
Link: https://lore.kernel.org/r/20240322123952.6384-2-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Use the macro PCI_IRQ_INTX instead of the deprecated PCI_IRQ_LEGACY macro.
Link: https://lore.kernel.org/r/20240325070944.3600338-21-dlemoal@kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
[bhelgaas: split to separate patch]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
To be consistent with the deprecation of PCI_IRQ_LEGACY and its
replacement with PCI_IRQ_INTX, rename macros and functions referencing
"legacy irq" to instead use the term "intx irq".
Link: https://lore.kernel.org/r/20240325070944.3600338-20-dlemoal@kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Use the macro PCI_IRQ_INTX instead of the deprecated PCI_IRQ_LEGACY macro.
Link: https://lore.kernel.org/r/20240325070944.3600338-18-dlemoal@kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Heiner Kallweit <hkallweit1@gmail.com>
Use the macro PCI_IRQ_INTX instead of the deprecated PCI_IRQ_LEGACY macro.
To be consistent with this change, rename AQ_HW_IRQ_LEGACY and
AQ_CFG_FORCE_LEGACY_INT to AQ_HW_IRQ_INTX and AQ_CFG_FORCE_INTX.
Link: https://lore.kernel.org/r/20240325070944.3600338-16-dlemoal@kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
In vmci_guest_probe_device(), remove the reference to PCI_IRQ_LEGACY by
using PCI_IRQ_ALL_TYPES instead of an explicit OR of all IRQ types.
Link: https://lore.kernel.org/r/20240325070944.3600338-14-dlemoal@kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use the macro PCI_IRQ_INTX instead of the deprecated PCI_IRQ_LEGACY macro.
Link: https://lore.kernel.org/r/20240325070944.3600338-12-dlemoal@kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Use the macro PCI_IRQ_INTX instead of the deprecated PCI_IRQ_LEGACY macro.
Link: https://lore.kernel.org/r/20240325070944.3600338-11-dlemoal@kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Use the macro PCI_IRQ_INTX instead of the deprecated PCI_IRQ_LEGACY macro.
Link: https://lore.kernel.org/r/20240325070944.3600338-9-dlemoal@kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Use the macro PCI_IRQ_INTX instead of the deprecated PCI_IRQ_LEGACY macro.
Link: https://lore.kernel.org/r/20240325070944.3600338-8-dlemoal@kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Use the macro PCI_IRQ_INTX instead of the deprecated PCI_IRQ_LEGACY macro.
Link: https://lore.kernel.org/r/20240325070944.3600338-7-dlemoal@kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use the macro PCI_IRQ_INTX instead of the deprecated PCI_IRQ_LEGACY macro.
Link: https://lore.kernel.org/r/20240325070944.3600338-6-dlemoal@kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use the macro PCI_IRQ_INTX instead of the deprecated PCI_IRQ_LEGACY macro.
Link: https://lore.kernel.org/r/20240325070944.3600338-5-dlemoal@kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Change all references to PCI_IRQ_LEGACY to PCI_IRQ_INTX in the PCI
documentation to reflect that PCI_IRQ_LEGACY is deprecated.
Link: https://lore.kernel.org/r/20240325070944.3600338-4-dlemoal@kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
In the PCI Express Port Bus Driver, use the macro PCI_IRQ_INTX instead of
the now deprecated PCI_IRQ_LEGACY macro.
Link: https://lore.kernel.org/r/20240325070944.3600338-3-dlemoal@kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
In pci_alloc_irq_vectors_affinity(), use the macro PCI_IRQ_INTX instead of
the now deprecated PCI_IRQ_LEGACY macro.
Link: https://lore.kernel.org/r/20240325070944.3600338-2-dlemoal@kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Clarify the comment relating to the LT wait and the purpose of the check
that implements the implementation note in PCIe r6.1 sec 7.5.3.7.
Suggested-by: Maciej W. Rozycki <macro@orcam.me.uk>
Link: https://lore.kernel.org/r/20240423130820.43824-2-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
