Add missing field documentation for HTT_H2T_MSG_TYPE_RX_RING_SELECTION_CFG
command with indentation alignment.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Acked-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20241217084511.2981515-2-quic_periyasa@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Building the ath12k driver with llvm-18.1.7-x86_64 produces the warning:
drivers/net/wireless/ath/ath12k/mac.c:5606:12: warning: stack frame size (1176) exceeds limit (1024) in 'ath12k_mac_op_sta_state' [-Wframe-larger-than]
ath12k_mac_op_sta_state() itself does not consume much stack, but it
calls ath12k_mac_handle_link_sta_state() which in turn calls
ath12k_mac_station_add(). Since those are both static functions with
only one caller, it is suspected that these both get inlined, and
their stack usage is reported for ath12k_mac_op_sta_state().
A major contributor to the ath12k_mac_station_assoc() stack usage is:
struct ath12k_wmi_peer_assoc_arg peer_arg;
Avoid the excess stack usage by dynamically allocating peer_arg
instead of declaring it on the stack.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://patch.msgid.link/20241217202618.1329312-5-kvalo@kernel.org
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Currently when building ath12k with llvm-18.1.7-x86_64 the following warning is
observed:
drivers/net/wireless/ath/ath12k/mac.c:4946:13: warning: stack frame size (1112) exceeds limit (1024) in 'ath12k_sta_rc_update_wk' [-Wframe-larger-than]
A major contributor to the stack usage in this function is:
struct ath12k_wmi_peer_assoc_arg peer_arg;
Avoid the excess stack usage by dynamically allocating peer_arg
instead of declaring it on the stack.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://patch.msgid.link/20241217202618.1329312-4-kvalo@kernel.org
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Currently when building ath12k with gcc-14.2.0 the following warning
is observed:
drivers/net/wireless/ath/ath12k/mac.c: In function 'ath12k_bss_assoc':
drivers/net/wireless/ath/ath12k/mac.c:3080:1: warning: the frame size of 1040 bytes is larger than 1024 bytes [-Wframe-larger-than=]
A major contributor to the stack usage in this function is:
struct ath12k_wmi_peer_assoc_arg peer_arg;
Avoid the excess stack usage by dynamically allocating peer_arg
instead of declaring it on the stack.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://patch.msgid.link/20241217202618.1329312-3-kvalo@kernel.org
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Building the ath12k driver with llvm-18.1.7-x86_64 produces the warning:
drivers/net/wireless/ath/ath12k/mac.c:10028:12: warning: stack frame size (1080) exceeds limit (1024) in 'ath12k_mac_op_remain_on_channel' [-Wframe-larger-than]
A major contributor to the stack usage in this function is:
struct ath12k_wmi_scan_req_arg arg;
Avoid the excess stack usage by dynamically allocating arg instead of
declaring it on the stack. As part of the effort use __free() for both
this new allocation as well as the existing chan_list allocation, and
since then no central cleanup is required, replace all cleanup gotos
with returns.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://patch.msgid.link/20241217202618.1329312-2-kvalo@kernel.org
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
There is mismatch between the format of monitor destination TLVs received
and the expected format by the current implementation. The received TLVs
are in 64-bit format, while the implementation is designed to handle
32-bit TLVs. This leads to incorrect parsing. Fix it by adding support
for parsing 64-bit TLVs.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: P Praneesh <quic_ppranees@quicinc.com>
Acked-by: Kalle Valo <kvalo@kernel.org>
Acked-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Link: https://patch.msgid.link/20241217095058.2725755-1-quic_ppranees@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Prefer 'ktime_t' over 'struct timespec64' for 'struct ath_chanctx' and
'struct ath_softc' timestamps, choose standard kernel time API over an
ad-hoc math in 'chanctx_event_delta()' and 'ath9k_hw_get_tsf_offset()',
adjust related users. Compile tested only.
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Link: https://patch.msgid.link/20241209155027.636400-3-dmantipov@yandex.ru
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Since 'txq' argument of 'ath_txq_skb_done()' is actually
(mis|un)used, convert the former to local variable and
adjust all related users. Compile tested only.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Link: https://patch.msgid.link/20241209155027.636400-1-dmantipov@yandex.ru
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Now everything in ath12k is in place and we can enable Multi-Link Operation
(MLO) in the driver. For now it's only enabled for QCN9274 with firmware having
ATH12K_FW_FEATURE_MLO feature bit set.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: Rameshkumar Sundaram <quic_ramess@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://patch.msgid.link/20241211154358.776279-8-kvalo@kernel.org
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Currently, in the QMI host capability, the device index, the number of local
links, and the corresponding hardware link IDs are sent. The hardware link ID
assignment is based on the local variable `hw_link_id`, which starts from 0 and
ranges up to `num_local_links` in the device. Starting from 0 is not ideal
because it can result in the same link ID being assigned to different devices
in certain scenarios (e.g., split MAC). Additionally, for multi link
operations the firmware expects the hardware link IDs in the same order as the
Wireless Serial Interface (WSI) connection.
Hence, for MLO to function seamlessly, the hardware link IDs across devices
need to be unique and should follow the order of the WSI connection. To address
this, a previous change read the WSI index from the Device Tree (DT) and stored
it. Use this WSI index to determine the starting hardware link IDs for each
device, ensuring uniqueness and correct order across all devices.
While at it, add debug prints to clearly show the MLO capability advertisement
sent during QMI host capability exchange.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
Co-developed-by: Raj Kumar Bhagat <quic_rajkbhag@quicinc.com>
Signed-off-by: Raj Kumar Bhagat <quic_rajkbhag@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://patch.msgid.link/20241211154358.776279-7-kvalo@kernel.org
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
To maintain backward compatibility with older firmware versions, introduce a
new feature bit, ATH12K_FW_FEATURE_MLO, to identify whether the firmware
supports MLO. If the firmware-X.bin does not have this bit advertised in the
feature, then MLO capability in the host will be disabled.
This applies only for QCN9274 chipsets.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://patch.msgid.link/20241211154358.776279-6-kvalo@kernel.org
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
In the function ath12k_htt_mlo_offset_event_handler(), it is possible that
the ar is not yet active (started). The function
ath12k_mac_get_ar_by_pdev_id() only searches for active pdev, so a NULL
return is possible. Therefore, there is no need to print a warning,
instead, just silently discard the message.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://patch.msgid.link/20241211154358.776279-5-kvalo@kernel.org
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Currently, certain WMI events are frequently received by the host. Since
the host lacks the logic to process these events, the console is flooded
with ‘Unknown eventid:’ debug messages.
To address this, handle these events gracefully without printing debug
messages. There is already a block of event IDs that are ignored with a debug
print. However, this new type of event occurs more frequently, so no debug
print is necessary, and handling it should be a no-op.
While at it, re-arrange the code so that all Unknown event IDs are towards
the end of the switch block.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://patch.msgid.link/20241211154358.776279-4-kvalo@kernel.org
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
When operating as an ML station, mac80211 initially activates only one link in
the driver until the peer is authorized. Once the state changes to authorized,
the driver should call mac80211 API to activate all other partner links.
Before doing so, mac80211 checks if the driver supports activating links via
the can_activate_links mac80211_ops. Therefore, add support for this
mac80211_ops and call the API to activate the links once the state changes to
authorized.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://patch.msgid.link/20241211154358.776279-3-kvalo@kernel.org
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Currently, the hardware scan is initiated in the driver on scan link (15).
After mapping to the appropriate radio based on the scan frequency, the vdev is
created and the scan begins. However, the vdev is only deleted when channel
assignment is about to occur after the scan. Additionally, it is also deleted
if a new scan is requested on the same interface but the underlying radio
differs in the new request.
This imbalance leads to various hardware scan issues, especially when a non-MLO
and MLO combination exists. In such cases, the latter tries to skip the scan
and proceed with channel assignment while the former is still scanning, causing
a firmware assert.
To address this issue, symmetrize the scan vdev creation and deletion during
hardware scan operations. This means creating a vdev when the scan starts and
deleting it once the scan is completed or aborted.
While at this, add a few debug prints in scan handling and a few empty lines
for better code read.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://patch.msgid.link/20241211154358.776279-2-kvalo@kernel.org
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
mac80211 expects link_id in some scenarios or else the packet might
get dropped. Hence, add link_id information before delivering the skb.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://patch.msgid.link/20241209185421.376381-10-kvalo@kernel.org
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
In the ath12k_mac_hw_register() function's context, ar is an iterator
variable, and there is no assurance that the last ar will be the one with
6 GHz enabled. Therefore, checking directly ar->supports_6ghz outside the
loop is not appropriate.
Additionally, 6 GHz lacks HT capabilities. To obtain the super set of
HT capabilities across all grouped radios, 6 GHz should be excluded.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://patch.msgid.link/20241209185421.376381-9-kvalo@kernel.org
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
If the requested memory chunk is too large, an error message is logged, but the
request continues to be processed. However, no actual memory is allocated to
the firmware from this request. Instead, the firmware sends another request
with smaller chunks, where memory will be allocated accordingly. Therefore, it
is pointless to proceed with parsing the request if at least one of the
requests cannot be fulfilled.
Hence, return -EAGAIN immediately and proceed to process the new request.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://patch.msgid.link/20241209185421.376381-8-kvalo@kernel.org
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
The prerequisite for MLO support in cfg80211/mac80211 requires that all the
links participating in MLO belong to the same wiphy/struct ieee80211_hw. The
driver needs to group multiple discrete hardware components, each acting as a
link in MLO, under one wiphy. Consequently, the driver advertises
multi-hardware device interface combination capabilities specific to the radio,
including supported frequencies. The global interface combination represent the
combined interface capabilities.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://patch.msgid.link/20241209185421.376381-7-kvalo@kernel.org
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Currently, radio stores the low frequency and high frequency information as
separate variables. However, cfg80211 already provides a suitable data
structure struct wiphy_radio_freq_range to store this information efficiently.
Additionally, for multi radio per wiphy infrastructure, this frequency range
information is essential. In future patches using struct wiphy_radio_freq_range
makes the code simpler.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://patch.msgid.link/20241209185421.376381-6-kvalo@kernel.org
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Introduce a cleanup helper function to avoid redundant code for interface
combination cleanup. Remove the cleanup code from ath12k_mac_hw_unregister()
and ath12k_mac_hw_register() and replace it with a new cleanup helper function.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://patch.msgid.link/20241209185421.376381-5-kvalo@kernel.org
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
In the Inter Multi-Link Operation, the primary device is expected to receive
the partner device buffer. Therefore, each device initializes the partner
device buffer in their cmem configuration. So add a helper function to
initialize the partner device buffer in their cmem configuration.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://patch.msgid.link/20241209185421.376381-4-kvalo@kernel.org
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Currently, partner device buffer is not handled in the receive data path. In
Multi-Link Operation, the partner device buffer is reported to the primary
upper MAC rings. Therefore, add partner device buffer processing in the REO and
Exception ring handler.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://patch.msgid.link/20241209185421.376381-3-kvalo@kernel.org
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Currently, all the rx processing treats the hardware link id as the MAC id.
The HW link id is a unique identifier for all hardware links participating in
the multi link group. Therefore, the current MAC id derivation is insufficient
to process the partner rx buffer in the Multi-Link Operation. So derive the
MAC id from the HW link id and implementing this change in rx processing will
enable the scaling of partner buffer processing in Multi-Link Operation.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://patch.msgid.link/20241209185421.376381-2-kvalo@kernel.org
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Currently, in DP rx error processing, the MAC id is fetched redundantly from
the same descriptor for each MSDU. To avoid this redundancy, move the fetch
handling before the iteration.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://patch.msgid.link/20241211153432.775335-9-kvalo@kernel.org
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
In case of multi device group abstraction, host has to exchange the multi-link
operation commands such as setup and ready to firmware before registering the
device group to mac80211.
The multi-link operation commands - setup, ready and teardown are necessary for
many commands such as WMI_PEER_ASSOC_CMD, WMI_BCN_TMPL_CMD in case of
multi-link interfaces.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com>
Signed-off-by: Harshitha Prem <quic_hprem@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://patch.msgid.link/20241211153432.775335-8-kvalo@kernel.org
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
In case of multi device group abstraction, host has to exchange the MLO
commands such as setup, teardown and ready to firmware.
Once multi device group is ready, host has to exchange MLO setup command with
partner devices link information and followed by MLO ready command to firmware.
During deinit, MLO teardown command should be sent to firmware. Firmware would
send MLO setup complete and MLO teardown complete to host for MLO setup command
and MLO teardown command respectively.
Added WMI helper functions for the MLO setup, ready and teardown command
and the handling for corresponding event from firmware. Add appropriate WMI
tag, command id and event id to parse the event and send request.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Co-developed-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com>
Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com>
Signed-off-by: Bhagavathi Perumal S <quic_bperumal@quicinc.com>
Signed-off-by: Harshitha Prem <quic_hprem@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://patch.msgid.link/20241211153432.775335-7-kvalo@kernel.org
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
To enable Multi-Link Operation (MLO), QCN9274 firmware requests MLO global
memory (MLO_GLOBAL_MEM_REGION_TYPE). This memory region is shared across all
the firmware (SoC) that are participation in the MLO.
Hence, add support to allocate and free MLO global memory region. Allocate one
MLO global memory per struct ath12k_hw_group and assign the same memory to all
firmware in the same struct ath12k_hw_group. WCN7850 firmware does not request
this memory type, therefore this change will have no impact on WCN7850 device.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.1.1-00210-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com>
Co-developed-by: Raj Kumar Bhagat <quic_rajkbhag@quicinc.com>
Signed-off-by: Raj Kumar Bhagat <quic_rajkbhag@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://patch.msgid.link/20241211153432.775335-6-kvalo@kernel.org
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Currently, all QMI target memory types share the same allocation logic within
ath12k_qmi_alloc_target_mem_chunk(). However, for Multi-Link Operation (MLO),
the firmware requests a new MLO global memory region. This memory is shared
across different firmware (SoC) participating in the MLO. To accommodate this
logic change, refactor ath12k_qmi_alloc_target_mem_chunk() and introduce a
helper function ath12k_qmi_alloc_chunk() for memory chunk allocation.
Subsequent patch will add MLO global memory allocation logic.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.1.1-00210-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com>
Signed-off-by: Raj Kumar Bhagat <quic_rajkbhag@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://patch.msgid.link/20241211153432.775335-5-kvalo@kernel.org
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Currently, QMI MLO host capability is sent with the details of local links and
hw_link id only for particular device. But in the case of multi device group
abstraction, it has to include the details of hw_link_id, num_local_links of
every partner device that is involved in the group during QMI MLO capability
exchange. Add changes to send partner device details to the firmware in QMI MLO
capability exchange.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com>
Signed-off-by: Harshitha Prem <quic_hprem@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://patch.msgid.link/20241211153432.775335-4-kvalo@kernel.org
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Currently, a single device is part of the device group abstraction. However,
for multi-link operations, multiple devices need to be combined. This
multi-device grouping is done via WSI (WLAN Serial Interface), which is
described in the Device Tree. Information about different WSI groups and the
number of devices involved in each group can be parsed from the Device Tree.
Add changes to parse the Device Tree and determine WSI information, such as the
different WSI groups and the number of devices per WSI group. Assign WSI index
zero to the WSI controller device (to synchronize the clock among the devices
within the WSI group), and increment the WSI index of each device in the order
of the WSI connection.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Co-developed-by: Harshitha Prem <quic_hprem@quicinc.com>
Signed-off-by: Harshitha Prem <quic_hprem@quicinc.com>
Signed-off-by: Raj Kumar Bhagat <quic_rajkbhag@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://patch.msgid.link/20241211153432.775335-3-kvalo@kernel.org
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
The QCN9274 WiFi device supports WSI (WLAN Serial Interface). WSI is used
to exchange specific control information across radios using a doorbell
mechanism. This WSI connection is essential for exchanging control
information among these devices. The WSI interface in the QCN9274 includes
TX and RX ports, which are used to connect multiple WSI-supported devices
together, forming a WSI group.
Describe QCN9274 PCI wifi device with WSI interface.
Signed-off-by: Raj Kumar Bhagat <quic_rajkbhag@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20241211153432.775335-2-kvalo@kernel.org
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
In ath12k_mac_assign_vif_to_vdev(), if arvif is created on a different
radio, it gets deleted from that radio through a call to
ath12k_mac_unassign_link_vif(). This action frees the arvif pointer.
Subsequently, there is a check involving arvif, which will result in a
read-after-free scenario.
Fix this by moving this check after arvif is again assigned via call to
ath12k_mac_assign_link_vif().
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1
Closes: https://scan5.scan.coverity.com/#/project-view/63541/10063?selectedIssue=1636423
Fixes: b5068bc918 ("wifi: ath12k: Cache vdev configs before vdev create")
Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
Acked-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Acked-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20241210-read_after_free-v1-1-969f69c7d66c@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
The ahvif->vif->link_conf[] array has IEEE80211_MLD_MAX_NUM_LINKS elements
so this should be >= instead of > to avoid an out of bounds access.
Fixes: 3952657848 ("wifi: ath12k: Use mac80211 vif's link_conf instead of bss_conf")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Acked-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/755becb1-819b-484d-8fac-9a2db53ced1b@stanley.mountain
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
In ath12k_dp_rx_peer_frag_setup(), commit ea41925538 ("wifi: ath12k: add primary
link for data path operations") checks whether a link is the primary link, and
returns directly if it isn't. In ML scenario where we have non-primary links created,
this results in leaking the michael_mic info since it is allocated by default but
could never be freed for a non-primary link.
Note that we can not move the might-sleep allocation after primary link check since
there we are in atomic context (due to spin lock). So keep the default allocation,
and then free it before return to fix this issue.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4
Fixes: ea41925538 ("wifi: ath12k: add primary link for data path operations")
Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Acked-by: Kalle Valo <kvalo@kernel.org>
Acked-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Link: https://patch.msgid.link/20241206054552.177424-1-quic_bqiang@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
This development cycle featured multiple patchsets to ath12k to
support the new 802.11be MLO feature, although the feature is still
incomplete. Also in ath12k, there were other feature patches. In
ath11k, support was added for QCA6698AQ. And there was the usual set
of bug fixes and cleanups across most drivers, notable being the
addition of "noinline_for_stack" to some functions to avoid "stack
frame size" warnings when compiling with clang.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQ/mtSHzPUi16IfDEksFbugiYzLewUCZ1cfJQAKCRAsFbugiYzL
e6csAP4yj+pdNHX6asbohlpJlohsyroOTEiPLZ9sP5qQ17eRRgEA6ycwqwJ/d39b
AyL2rJlxRQOz8sPbGeDvSAf3HkKN4Q4=
=81tw
-----END PGP SIGNATURE-----
Merge tag 'ath-next-20241209' of git://git.kernel.org/pub/scm/linux/kernel/git/ath/ath
ath.git patches for v6.14
This development cycle featured multiple patchsets to ath12k to
support the new 802.11be MLO feature, although the feature is still
incomplete. Also in ath12k, there were other feature patches. In
ath11k, support was added for QCA6698AQ. And there was the usual set
of bug fixes and cleanups across most drivers, notable being the
addition of "noinline_for_stack" to some functions to avoid "stack
frame size" warnings when compiling with clang.
In commit 52250cbee7 ("mwifiex: use timeout variant for
wait_event_interruptible") it was noted that sometimes we seemed
to miss the signal that our host sleep settings took effect. A
10 second timeout was added to the code to make sure we didn't
hang forever waiting. It appears that this problem still exists
and we hit the timeout sometimes for Chromebooks in the field.
Recently on ChromeOS we've started setting the DPM watchdog
to trip if full system suspend takes over 10 seconds. Given
the timeout in the original patch, obviously we're hitting
the DPM watchdog before mwifiex gets a chance to timeout.
While we could increase the DPM watchdog in ChromeOS to avoid
this problem, it's probably better to simply decrease the
timeout. Any time we're waiting several seconds for the
firmware to respond it's likely that the firmware won't ever
respond. With that in mind, decrease the timeout in mwifiex
from 10 seconds to 5 seconds.
Suggested-by: Doug Anderson <dianders@chromium.org>
Signed-off-by: Pin-yen Lin <treapking@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20241127105709.4014302-1-treapking@chromium.org
This removes the following error log when stopping AP:
ieee80211 phy0: brcmf_vif_set_mgmt_ie: vndr ie set error : -52
It happened if:
1) previously wlan interface was in station mode (wpa_supplicant) and
connected to a hotspot
2) then started AP mode (hostapd)
3) and then stopped AP mode.
The error happened when it tried to clear BRCMF_VNDR_IE_PRBREQ_FLAG.
This flag is not set in `brcmf_config_ap_mgmt_ie`, but
BRCMF_VNDR_IE_ASSOCRSP_FLAG is set instead.
Signed-off-by: Renjaya Raga Zenta <ragazenta@gmail.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20241121-brcmfmac-v1-1-02fc3fb427c2@gmail.com
'struct nla_policy' is not modified in this driver.
Constifying this structure moves some data to a read-only section, so
increase overall security, especially when the structure holds some
function pointers.
On a x86_64, with allmodconfig:
Before:
======
text data bss dec hex filename
5062 528 0 5590 15d6 drivers/net/wireless/ti/wlcore/testmode.o
After:
=====
text data bss dec hex filename
5178 404 0 5582 15ce drivers/net/wireless/ti/wlcore/testmode.o
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/78810e3ebb74ddbd3a4538f182bf1143b89baba7.1731332414.git.christophe.jaillet@wanadoo.fr
The scatter-gather handling uses a pre-allocated list (with nents entries).
If the driver runs out of sg entries it will result in an oops. Let's detect
this instead and make the SDIO block transfer fail.
Signed-off-by: Norbert van Bolhuis <nvbolhuis@gmail.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20241108125609.107016-1-nvbolhuis@gmail.com
Currently, during mac80211 allocate and register single device is
considered for the registration. But, in future, during multi device
group abstraction is introduced, all the devices has to be combined
together as a single abstraction and then hardware should be allocated.
All the devices in the group should be combined together only if it
supports inter device mlo capability. The decision of whether to combine
the devices or not can be based on the mlo capability flag in
ath12k_hw_group.
By default, mlo_capable flag in the group would be set as false. During
QMI PHY capability exchange, only when we have more than one chip in the
group or if one chip, then that chip supports inter MLO, then mlo_capable
flag in the group will be enabled.
Add changes to introduce mlo_capable flag for device group and refactor
ath12k_mac_hw_allocate() api based on device group (ag) rather than
device (ab).
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com>
Signed-off-by: Harshitha Prem <quic_hprem@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://patch.msgid.link/20241204163216.433795-8-kvalo@kernel.org
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
QMI host capability has the information regarding MLO parameters such as
device_id, MLO capability, group id and the information of each devices
involved in the group and sent immediately on QMI server arrive event.
Currently, only one device is involved in the group and hence, single
device information is sent as part of MLO capability of host.
But, in future when multi device group abstraction is introduced, host
should send all the device information involved in the group as part
of QMI MLO host capability rather than single device. Hence, sending
QMI host capability immediately on server arrive of a device might not
be ideal for multi device group abstraction as the details of other
devices in the group would not be available.
Hence, once QMI server arrive event is received, request for QMI PHY
capabilities of device, and defer the host capability send for that device.
After QMI PHY capability is received for all the devices in the group
trigger the host capability event for the deferred devices in the group.
Hence, add changes to defer the QMI host capability event until the device
group is ready and then resume the QMI exchange for all the device with
host capabilities.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com>
Signed-off-by: Harshitha Prem <quic_hprem@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://patch.msgid.link/20241204163216.433795-7-kvalo@kernel.org
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Currently, hardware abstractions (ah) of different radio bands are tightly
coupled to a single device (ab). But, with hardware device group abstraction
(ag), multiple radios across different devices in a group can form different
combinations of hardware abstractions (ah) within the group. Hence, the mapping
between ah to ab can be removed and instead it can be mapped with struct
ath12k_hw_group (ag).
Current mapping between struct ath12k_hw (ah), struct ath12k_base (ab) and struct
ath12k_hw_group (ag):
+------------------------------------------------+
| +-------------------------------------+ |
| | +---------------+ +---------------+ | |
| | |ath12k_hw (ah) | |ath12k_hw (ah) | | |
| | +---------------+ +---------------+ | |
| | | |
| | +-----------+ | +-----------+ | |
| | | ar (2GHz) | | | ar (5GHz) | | |
| | +-----------+ | +-----------+ | |
| | Dual band device-1 (ab) | |
| +-------------------------------------+ |
| ath12k_hw_group (ag) based on group id |
+------------------------------------------------+
After hardware device group abstraction moving ah array out of ab to ag:
+----------------------------------------------+
| +---------------+ +---------------+ |
| |ath12k_hw (ah) | |ath12k_hw (ah) | |
| +---------------+ +---------------+ |
| +-------------------------------------+ |
| | +-----------+ +-----------+ | |
| | | ar (2GHz) | | ar (5GHz) | | |
| | +-----------+ +-----------+ | |
| | Dual band device-1 (ab) | |
| +-------------------------------------+ |
| ath12k_hw_group (ag) based on group id |
+----------------------------------------------+
This decoupling of struct ath12k_hw (ah) from struct ath12k_base (ab) and
mapping it to struct ath12k_hw_group (ag) will help in forming different
combinations of multi-link devices.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com>
Signed-off-by: Harshitha Prem <quic_hprem@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://patch.msgid.link/20241204163216.433795-6-kvalo@kernel.org
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Currently, mac allocate/register and core_pdev_create are initiated immediately
when QMI firmware ready event is received for a particular device. With
hardware device group abstraction, QMI firmware ready event can be received
simultaneously for different devices in the group and so, it should not be
registered immediately rather it has to be deferred until all devices in the
group has received QMI firmware ready.
To handle this, refactor the code of core start to have registering within
ath12k_core_hw_group_start() and unregistering in ath12k_core_hw_group_stop().
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com>
Co-developed-by: Harshitha Prem <quic_hprem@quicinc.com>
Signed-off-by: Harshitha Prem <quic_hprem@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://patch.msgid.link/20241204163216.433795-5-kvalo@kernel.org
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Currently, single device is probed, and once firmware is ready, the device
is registered to mac80211. For Multi-Link Operation, different bands of
different devices or same device are part of a single wiphy and for
this, hardware device group abstraction is needed.
Hardware device group abstraction - when there are multiple devices (with
single radio or dual radio) that are connected by any means of interface
for communicating between them, then these devices can be combined
together as a single group using a group id to form a group abstraction
and register to mac80211.
The grouping information of multiple devices would be based on device tree
during device probe (will be implemented in future patches). If no such
information is available, then a single device will be part of group abstraction
and registered to mac80211, else multiple devices advertised in device tree are
combined and then registered to mac80211.
For device group abstraction, a base structure ath12k_hw_group (ag) and the
helpers are implemented. These helpers are used during device probe and mapping
the group to the devices involved.
An illustration of how multiple devices might be combined together in
future based on group id:
+------------------------------------------------------------------------+
| +-------------------------------------+ +-------------------+ |
| | +-----------+ | | +-----------+ | | +-----------+ | |
| | | ar (2GHz) | | | | ar (5GHz) | | | | ar (6GHz) | | |
| | +-----------+ | | +-----------+ | | +-----------+ | |
| | ath12k_base (ab) | | ath12k_base (ab) | |
| | (Dual band device) | | | |
| +-------------------------------------+ +-------------------+ |
| ath12k_hw_group (ag) based on group id |
+------------------------------------------------------------------------+
In the above representation, two devices are combined into single group
based on group id.
Add base code changes where single device would be part of a group with an
invalid group id forming an group abstraction. Multi device grouping will
be introduced in future.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com>
Co-developed-by: Harshitha Prem <quic_hprem@quicinc.com>
Signed-off-by: Harshitha Prem <quic_hprem@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://patch.msgid.link/20241204163216.433795-4-kvalo@kernel.org
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
At present, the mlo_capable_flags in ath12k_base is used to indicate whether
the chip supports inter (QCN9274) or intra (WCN7850) chip MLO. However, it’s
possible that the chip supports neither, especially with older firmware
versions. Additionally, if intra chip MLO is not supported, inter chip MLO will
also be non-functional. Therefore, having two separate flags for this is
unnecessary.
Therefore, rename this flag to single_chip_mlo_supp. At the same time convert
it into a bool data type. Also, get rid of the enums defined earlier.
For the QCN9274 family of chipsets, this will be set only when firmware
advertises the support during the QMI exchange.
For the WCN7850 family of chipsets, since the event is not supported,
assumption is made that single chip MLO is supported.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://patch.msgid.link/20241204163216.433795-3-kvalo@kernel.org
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
When hardware device group abstraction is introduced, a group abstraction is
registered to mac80211 rather than a particular single device. So we cannot
set the device registered when the QMI firmware ready event is received, only
after all the devices in group have received the event. To do that set and
unset ATH12K_FLAG_REGISTERED flag inside ath12k_mac_register() and
ath12k_mac_unregister() respectively.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com>
Signed-off-by: Harshitha Prem <quic_hprem@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://patch.msgid.link/20241204163216.433795-2-kvalo@kernel.org
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Currently, ieee80211_ie_build_he_oper() lacks support for 320 MHz handling
(already noted as a TODO). This is because 320 MHz is not included in
IEEE 802.11-ax. However, IEEE 802.11-be introduces 320 MHz support and if
the chandef indicates a 320 MHz bandwidth and is used directly as it is, it
will result in an incorrect HE Operation Information Element.
In order to support EHT 320 MHz, HE Operation Element should indicate
bandwidth as 160 MHz only. In EHT Operation IE, the correct bandwidth will
be present. Devices capable of EHT can parse EHT Information Element and
connect in 320 MHz and other HE capable devices can parse HE and can
connect in 160 MHz.
Add support to downgrade the bandwidth in ieee80211_ie_build_he_oper()
during 320 MHz operation and advertise it.
Signed-off-by: Sathishkumar Muruganandam <quic_murugana@quicinc.com>
Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
Link: https://patch.msgid.link/20241119-mesh_320mhz_support-v1-1-f9463338d584@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
