The continual trickle of small conversion patches is grating on me, and
is really not helping. Just get rid of the 'remove_new' member
function, which is just an alias for the plain 'remove', and had a
comment to that effect:
/*
* .remove_new() is a relic from a prototype conversion of .remove().
* New drivers are supposed to implement .remove(). Once all drivers are
* converted to not use .remove_new any more, it will be dropped.
*/
This was just a tree-wide 'sed' script that replaced '.remove_new' with
'.remove', with some care taken to turn a subsequent tab into two tabs
to make things line up.
I did do some minimal manual whitespace adjustment for places that used
spaces to line things up.
Then I just removed the old (sic) .remove_new member function, and this
is the end result. No more unnecessary conversion noise.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The Zynq UltraScale+ MPSoC DDR has a disjoint memory from 2GB to 32GB.
The DDR host interface has a contiguous memory so while injecting
errors, the driver should remove the hole else the injection fails as
the address translation is incorrect.
Introduce a get_mem_info() function pointer and set it for Zynq
UltraScale+ platform to return host address.
Fixes: 1a81361f75 ("EDAC, synopsys: Add Error Injection support for ZynqMP DDR controller")
Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20240711100656.31376-1-shubhrajyoti.datta@amd.com
The race condition around the ECCCLR register access happens in the IRQ
disable method called in the device remove() procedure and in the ECC IRQ
handler:
1. Enable IRQ:
a. ECCCLR = EN_CE | EN_UE
2. Disable IRQ:
a. ECCCLR = 0
3. IRQ handler:
a. ECCCLR = CLR_CE | CLR_CE_CNT | CLR_CE | CLR_CE_CNT
b. ECCCLR = 0
c. ECCCLR = EN_CE | EN_UE
So if the IRQ disabling procedure is called concurrently with the IRQ
handler method the IRQ might be actually left enabled due to the
statement 3c.
The root cause of the problem is that ECCCLR register (which since
v3.10a has been called as ECCCTL) has intermixed ECC status data clear
flags and the IRQ enable/disable flags. Thus the IRQ disabling (clear EN
flags) and handling (write 1 to clear ECC status data) procedures must
be serialised around the ECCCTL register modification to prevent the
race.
So fix the problem described above by adding the spin-lock around the
ECCCLR modifications and preventing the IRQ-handler from modifying the
IRQs enable flags (there is no point in disabling the IRQ and then
re-enabling it again within a single IRQ handler call, see the
statements 3a/3b and 3c above).
Fixes: f7824ded41 ("EDAC/synopsys: Add support for version 3 of the Synopsys EDAC DDR")
Signed-off-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20240222181324.28242-2-fancer.lancer@gmail.com
Use devm_platform_ioremap_resource() to simplify code.
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/20230704101811.49637-3-frank.li@vivo.com
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20231004131254.2673842-19-u.kleine-koenig@pengutronix.de
The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it was merged into the regular platform bus.
As part of that merge prepping Arm DT support 13 years ago, they
"temporarily" include each other. They also include platform_device.h
and of.h. As a result, there's a pretty much random mix of those include
files used throughout the tree. In order to detangle these headers and
replace the implicit includes with struct declarations, users need to
explicitly include the correct includes.
Link: https://lore.kernel.org/r/20230714174434.4054728-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
zynqmp_get_error_info() writes 0 to the ECC_CLR_OFST register after
an interrupt for a {un-,}correctable error is raised, which disables
the error interrupts. Then the interrupt handler will be called only
once. Therefore, re-enable the error interrupt line at the end of
intr_handler() for v3.x Synopsys EDAC DDR.
Fixes: f7824ded41 ("EDAC/synopsys: Add support for version 3 of the Synopsys EDAC DDR")
Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Shubhrajyoti Datta <Shubhrajyoti.datta@xilinx.com>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220427015137.8406-3-sherry.sun@nxp.com
v3.x Synopsys EDAC DDR doesn't have the QOS Interrupt register. Use the
ECC Clear Register to disable the error interrupts instead.
Fixes: f7824ded41 ("EDAC/synopsys: Add support for version 3 of the Synopsys EDAC DDR")
Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Shubhrajyoti Datta <Shubhrajyoti.datta@xilinx.com>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220427015137.8406-2-sherry.sun@nxp.com
the code considerably this way
- Rip out the silly edac_align_ptr() contraption which was computing the
size of the private structures of each driver and thus allowing for a
one-shot memory allocation. This was clearly unnecessary and confusing
so switch to simple and boring kmalloc* calls.
- Last but not least, the usual garden variety of fixes, cleanups and
improvements all over EDAC land
-----BEGIN PGP SIGNATURE-----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=Hwmn
-----END PGP SIGNATURE-----
Merge tag 'edac_updates_for_v5.19_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras
Pull EDAC updates from Borislav Petkov:
- Switch ghes_edac to use the CPER error reporting routines and
simplify the code considerably this way
- Rip out the silly edac_align_ptr() contraption which was computing
the size of the private structures of each driver and thus allowing
for a one-shot memory allocation. This was clearly unnecessary and
confusing so switch to simple and boring kmalloc* calls.
- Last but not least, the usual garden variety of fixes, cleanups and
improvements all over EDAC land
* tag 'edac_updates_for_v5.19_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
EDAC/xgene: Fix typo processsors -> processors
EDAC/i5100: Remove unused inline function i5100_nrecmema_dm_buf_id()
EDAC: Use kcalloc()
EDAC/ghes: Change ghes_hw from global to static
EDAC/armada_xp: Use devm_platform_ioremap_resource()
EDAC/synopsys: Add a SPDX identifier
EDAC/synopsys: Add driver support for i.MX platforms
EDAC/dmc520: Don't print an error for each unconfigured interrupt line
EDAC/mc: Get rid of edac_align_ptr()
EDAC/device: Sanitize edac_device_alloc_ctl_info() definition
EDAC/device: Get rid of the silly one-shot memory allocation in edac_device_alloc_ctl_info()
EDAC/pci: Get rid of the silly one-shot memory allocation in edac_pci_alloc_ctl_info()
EDAC/mc: Get rid of silly one-shot struct allocation in edac_mc_alloc()
efi/cper: Reformat CPER memory error location to more readable
EDAC/ghes: Unify CPER memory error location reporting
efi/cper: Add a cper_mem_err_status_str() to decode error description
powerpc/85xx: Remove fsl,85... bindings
Currently, the error count is read wrongly from the status register. Read
the count from the proper error count register (ERRCNT).
[ bp: Massage. ]
Fixes: b500b4a029 ("EDAC, synopsys: Add ECC support for ZynqMP DDR controller")
Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220414102813.4468-1-shubhrajyoti.datta@xilinx.com
Add support for version 3.80a of the Synopsys DDR controller. This
version of the controller has the following differences:
- UE/CE are auto cleared
- Interrupts are supported by default
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Michal Simek <michal.simek@xilinx.com>
Link: https://lkml.kernel.org/r/20211012190709.1504152-2-dinguyen@kernel.org
Version 2.40a supports DDR_ECC_INTR_SUPPORT for a quirk, so use that
quirk to determine a call to setup_address_map().
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Michal Simek <michal.simek@xilinx.com>
Link: https://lkml.kernel.org/r/20211012190709.1504152-1-dinguyen@kernel.org
Return the error value if the inject sysfs file creation fails, rather
than returning 0, to signal to the upper layer that the ->probe function
failed.
[ bp: Massage. ]
Signed-off-by: Zhang Xiaoxu <zhangxiaoxu5@huawei.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Michal Simek <michal.simek@xilinx.com>
Link: https://lkml.kernel.org/r/20201116135810.3130845-1-zhangxiaoxu5@huawei.com
On the ZynqMP platform, zynqmp_get_error_info() is used to read out
error information. In this function, the pinf->col parameter is not
used (it is only used by the Zynq platform's zynq_get_error_info()). So
there's no need to print pinf->col on ZynqMP.
In order to differentiate on which platform handle_error() is executed,
use DDR_ECC_INTR_SUPPORT as the check condition to distinguish between
Zynq and ZynqMP platforms.
[ bp: Massage. ]
Fixes: b500b4a029 ("EDAC, synopsys: Add ECC support for ZynqMP DDR controller")
Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Manish Narani <manish.narani@xilinx.com>
Link: https://lkml.kernel.org/r/1584365679-27443-1-git-send-email-sherry.sun@nxp.com
handle_error() currently calls snprintf() a couple of times in
succession to output the message for a CE/UE, therefore overwriting each
part of the message which was formatted with the previous snprintf()
call. As a result, only the part of the message from the last snprintf()
call will be printed.
The simplest and most effective way to fix this problem is to combine
the whole string into one which to supply to a single snprintf() call.
[ bp: Massage. ]
Fixes: b500b4a029 ("EDAC, synopsys: Add ECC support for ZynqMP DDR controller")
Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: James Morse <james.morse@arm.com>
Cc: Manish Narani <manish.narani@xilinx.com>
Link: https://lkml.kernel.org/r/1582792452-32575-1-git-send-email-sherry.sun@nxp.com
It is a write-only variable so get rid of it.
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Robert Richter <rric@kernel.org>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Acked-by: Thor Thayer <thor.thayer@linux.intel.com>
Acked-by: Tony Luck <tony.luck@intel.com>
Cc: Mark Gross <mark.gross@intel.com>
Cc: Tim Small <tim@buttersideup.com>
Cc: Ranganathan Desikan <ravi@jetztechnologies.com>
Cc: "Arvind R." <arvino55@gmail.com>
Cc: Jason Baron <jbaron@akamai.com>
Cc: "Sören Brinkmann" <soren.brinkmann@xilinx.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: David Daney <david.daney@cavium.com>
Cc: Loc Ho <lho@apm.com>
Cc: linux-edac@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-mips@linux-mips.org
Add EDAC support for ecc errors reporting on the synopsys ddr
controller. The ddr ecc controller corrects single bit errors and
detects double bit errors.
Selected important-ish notes from the changelog:
- I have not taken care of spliting synps_edac_geterror_info function as
it adds additional indentation levels and moreover the existing changes
were made as part of the v2 review comments
- Removed dt binding info as already there is a binding info available
under memorycontroller. so, updated ecc info there.
- Shortened the prefix "sysnopsys" to "synps"
Signed-off-by: Punnaiah Choudary Kalluri <punnaia@xilinx.com>
Link: http://lkml.kernel.org/r/a728a8d4678f4dbf9de189a480297c3d@BY2FFO11FD034.protection.gbl
[ Boris: massage commit message. ]
Signed-off-by: Borislav Petkov <bp@suse.de>
