This reverts commit f042bc234c2e00764b8aa2c9e2f8177cdc63f664.
A recent change enabling role switching for the x1e80100 USB-C
controllers breaks UCSI and DisplayPort Alternate Mode when the
controllers are in host mode:
ucsi_glink.pmic_glink_ucsi pmic_glink.ucsi.0: PPM init failed, stop trying
As enabling OTG mode currently breaks SuperSpeed hotplug and suspend,
and with retimer (and orientation detection) support not even merged
yet, let's revert at least until we have stable host mode in mainline.
Fixes: f042bc234c2e ("arm64: dts: qcom: x1e80100: enable OTG on USB-C controllers")
Reported-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/all/hw2pdof4ajadjsjrb44f2q4cz4yh5qcqz5d3l7gjt2koycqs3k@xx5xvd26uyef
Link: https://lore.kernel.org/lkml/Z1gbyXk-SktGjL6-@hovoldconsulting.com/
Cc: Jonathan Marek <jonathan@marek.ca>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20241210111444.26240-4-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
This reverts commit 2dd3250191bcfe93b0c9da46624af830310400a7.
A recent change enabling OTG mode on the x1e81000 CRD breaks suspend.
Specifically, the device hard resets during resume if suspended with all
controllers in device mode (i.e. no USB device connected).
The corresponding change on the T14s also led to SuperSpeed hotplugs not
being detected.
With retimer (and orientation detection) support not even merged yet,
let's revert at least until we have stable host mode in mainline.
Fixes: 2dd3250191bc ("arm64: dts: qcom: x1e80100-crd: enable otg on usb ports")
Reported-by: Abel Vesa <abel.vesa@linaro.org>
Cc: Jonathan Marek <jonathan@marek.ca>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20241210111444.26240-3-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
As per memory map table, the region for PCIe6a is 64MByte. Hence, set the
size of 32 bit non-prefetchable memory region beginning on address
0x70300000 as 0x3d00000 so that BAR space assigned to BAR registers can be
allocated from 0x70300000 to 0x74000000.
Fixes: 7af141850012 ("arm64: dts: qcom: x1e80100: Fix up BAR spaces")
Cc: stable@vger.kernel.org
Signed-off-by: Qiang Yu <quic_qianyu@quicinc.com>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20241113080508.3458849-1-quic_qianyu@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
This reverts commit 1a48dd7b9ac809d1bd0fd2fef509abba83433846.
A recent change enabling OTG mode on the Lenovo ThinkPad T14s USB-C
ports can break SuperSpeed device hotplugging. The host controller is
enumerated, but the device is not:
xhci-hcd xhci-hcd.5.auto: xHCI Host Controller
xhci-hcd xhci-hcd.5.auto: new USB bus registered, assigned bus number 3
xhci-hcd xhci-hcd.5.auto: hcc params 0x0110ffc5 hci version 0x110 quirks 0x000080a000000810
xhci-hcd xhci-hcd.5.auto: irq 247, io mem 0x0a800000
xhci-hcd xhci-hcd.5.auto: xHCI Host Controller
xhci-hcd xhci-hcd.5.auto: new USB bus registered, assigned bus number 4
xhci-hcd xhci-hcd.5.auto: Host supports USB 3.1 Enhanced SuperSpeed
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 1 port detected
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 1 port detected
Once this happens on either of the two ports, no amount of disconnecting
and reconnecting makes the SuperSpeed device be enumerated, while
FullSpeed device enumeration still works.
With retimer (and orientation detection) support not even merged yet,
let's revert at least until we have stable host mode in mainline.
Fixes: 1a48dd7b9ac8 ("arm64: dts: qcom: x1e78100-t14s: enable otg on usb-c ports")
Cc: Jonathan Marek <jonathan@marek.ca>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20241206172402.20724-1-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
At the moment, x1e80100-pmics.dtsi enables two of the SMB2360 PMICs by
default and leaves the other two disabled. The third one was originally
also enabled by default, but then disabled in commit a237b8da413c ("arm64:
dts: qcom: x1e80100: Disable SMB2360_2 by default"). This is inconsistent
and confusing. Some laptops will even need SMB2360_1 disabled by default if
they just have a single USB-C port.
Make this consistent by keeping all SMB2360 disabled in x1e80100-pmics.dtsi
and enable them separately for all boards where needed. That way it is
always clear which ones are available and avoids accidentally trying to
read/write from missing chips when some of the PMICs are not present.
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20241210-x1e80100-disable-smb2360-v2-1-2449be2eca29@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Simplify error handling over locks with guard(). In few places this
elimiates error gotos and local variables. Switch to guard() everywhere
(except when jumps would go over scoped guard) for consistency, even if
it does not bring benefit in such places.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240822164815.230167-2-krzysztof.kozlowski@linaro.org
[bjorn: Rebased ontop of v6.13-rc1]
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
File-scope "__pmic_glink_lock" mutex protects the filke-scope
"__pmic_glink", thus reference to it should be obtained under the lock,
just like pmic_glink_rpmsg_remove() is doing. Otherwise we have a race
during if PMIC GLINK device removal: the pmic_glink_rpmsg_probe()
function could store local reference before mutex in driver removal is
acquired.
Fixes: 58ef4ece1e41 ("soc: qcom: pmic_glink: Introduce base PMIC GLINK driver")
Cc: stable@vger.kernel.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240822164815.230167-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Properties with variable number of items per each device are expected to
have widest constraints in top-level "properties:" block and further
customized (narrowed) in "if:then:". Add missing top-level constraints
for reg, clocks and clock-names.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20240817094605.27185-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
By convention we expect first "compatible", then "reg" and then rest.
Order properties to match convention and what is in "required:" block.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20240817094605.27185-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add initial support for Qualcomm QCS8300 RIDE board which enables DSPs,
UFS and booting to shell with uart console.
Written with help from Tingguo Cheng (added rpmhpd nodes) and Xin Liu
(added ufs, adsp and gpdsp nodes).
Signed-off-by: Jingyi Wang <quic_jingyw@quicinc.com>
Link: https://lore.kernel.org/r/20241203-qcs8300_initial_dtsi-v4-4-d7c953484024@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add initial DTSI for QCS8300 SoC.
Features added in this revision:
- CPUs with PSCI idle states
- Interrupt-controller with PDC wakeup support
- Timers, TCSR Clock Controllers
- Reserved Shared memory
- GCC and RPMHCC
- TLMM
- Interconnect
- QuP with uart
- SMMU
- QFPROM
- Rpmhpd power controller
- UFS
- Inter-Processor Communication Controller
- SRAM
- Remoteprocs including ADSP,CDSP and GPDSP
- BWMONs
Written with help from Zhenhua Huang(added the smmu node), Xin Liu(added
ufs, adsp and gpdsp nodes), Tingguo Cheng(added the rpmhpd node), Kyle
Deng(added the aoss_qmp node), Raviteja Laggyshetty(added interconnect
nodes) and Cong Zhang(added the INTID of EL2 non-secure physical timer).
Signed-off-by: Jingyi Wang <quic_jingyw@quicinc.com>
Link: https://lore.kernel.org/r/20241203-qcs8300_initial_dtsi-v4-3-d7c953484024@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Enable primary USB controller on QCS615 Ride platform. The primary USB
controller is made "peripheral", as this is intended to be connected to
a host for debugging use cases.
For using the controller in host mode, changing the dr_mode and adding
appropriate pinctrl nodes to provide vbus would be sufficient.
Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20241121063007.2737908-3-quic_kriskura@quicinc.com
[bjorn: Fixed subject]
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add support for primary USB controller and its PHYs on
QCS615.
Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20241121063007.2737908-2-quic_kriskura@quicinc.com
[bjorn: Fixed subject]
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add the APPS SMMU node for QCS615 platform. Add the dma-ranges
to limit DMA address range to 36bit width to align with system
architecture.
Signed-off-by: Qingqing Zhou <quic_qqzhou@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20241105032107.9552-4-quic_qqzhou@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add the SCM node for QCS615 platform. It is an interface to
communicate to the secure firmware.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Qingqing Zhou <quic_qqzhou@quicinc.com>
Link: https://lore.kernel.org/r/20241105032107.9552-3-quic_qqzhou@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The QCS615 platform has LLCC(Last Level Cache Controller) as the system
cache controller. It includes 1 LLCC instance and 1 LLCC broadcast
interface.
Add LLCC node support for the QCS615 platform.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Song Xue <quic_songxue@quicinc.com>
Link: https://lore.kernel.org/r/20241031-add_llcc_dts_node_for_qcs615-v2-1-205766a607ca@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add the Always-On Subsystem Qualcomm Message Protocol(AOSS_QMP) node for
QCS615 SoC. The AOSS_QMP enables the system to send and receive messages
on the SoC and uses the same hardware version as sdm845.
Signed-off-by: Kyle Deng <quic_chunkaid@quicinc.com>
Link: https://lore.kernel.org/r/20241018073417.2338864-4-quic_chunkaid@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add initial support for Qualcomm QCS615 RIDE board and enable
the QCS615 RIDE board to shell with uart console.
Written with help from Tingguo Cheng (added regulator nodes).
Signed-off-by: Lijuan Gao <quic_lijuang@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20241104-add_initial_support_for_qcs615-v5-4-9dde8d7b80b0@quicinc.com
[bjorn: Fix subject]
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Enable clock controller, interconnect and pinctrl for Qualcomm QCS615
platform to boot to UART console.
The serial engine depends on GCC, interconnect, and pinctrl. It is
necessary to build them as built-in modules because the debug console
must be registered before userspace is launched. The primary reason for
this is that, for example, systemd opens /dev/console at launch (i.e.,
when the init process starts). Therefore, if we register the console after
this, we will not receive console output from systemd.
Signed-off-by: Lijuan Gao <quic_lijuang@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20241104-add_initial_support_for_qcs615-v5-5-9dde8d7b80b0@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add initial DTSI for QCS615 SoC.
Features added in this revision:
- CPUs with PSCI idle states
- Interrupt-controller with PDC wakeup support
- Timers, TCSR Clock Controllers
- Reserved Shared memory
- QFPROM
- TLMM
- Watchdog
- RPMH controller
- Sleep stats driver
- Rpmhpd power controller
- Interconnect
- GCC and Rpmhcc
- QUP with Uart serial support
Written with help from Tingguo Cheng (added rpmhpd power controller nodes)
Taniya Das (added clocks nodes), and Raviteja Laggyshetty (added
interconnect nodes).
Signed-off-by: Lijuan Gao <quic_lijuang@quicinc.com>
Link: https://lore.kernel.org/r/20241104-add_initial_support_for_qcs615-v5-3-9dde8d7b80b0@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
For both the controller instances, size of the 'addr_space' region should
be 0x1fe00000 as per the hardware memory layout.
Otherwise, endpoint drivers cannot request even reasonable BAR size of 1MB.
Cc: stable@vger.kernel.org # 6.11
Fixes: c5f5de8434ec ("arm64: dts: qcom: sa8775p: Add ep pcie1 controller node")
Fixes: 1924f5518224 ("arm64: dts: qcom: sa8775p: Add ep pcie0 controller node")
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20241128145147.145618-1-manivannan.sadhasivam@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The Laptop 7 features two USB-C ports, each one sporting a PS8830 USB-C
retimer/mux. Wire them up.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20241129-topic-sl7_feat2-v2-3-fb6cf5660cfc@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The Surface Laptops have a Realtek RTS5261 SD Card reader connected
over a Gen1x1 link to the PCIe3 host. Set up the necessary bits to
make it functional.
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20241129-topic-sl7_feat2-v2-2-fb6cf5660cfc@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The Laptop 7 features a single pair of speakers and an equal amount of
digital mics.
Add the required nodes to support audio playback and recording.
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20241129-topic-sl7_feat2-v2-1-fb6cf5660cfc@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Merge the arm64-for-6.13 branch into arm64-for-6.14, to carry forward
the commits that were picked up late in the cycle but didn't make it
into a pull request.
core: add of based component probing
Some devices are designed and manufactured with some components having
multiple drop-in replacement options. These components are often
connected to the mainboard via ribbon cables, having the same signals
and pin assignments across all options. These may include the display
panel and touchscreen on laptops and tablets, and the trackpad on
laptops. Sometimes which component option is used in a particular device
can be detected by some firmware provided identifier, other times that
information is not available, and the kernel has to try to probe each
device.
Instead of a delicate dance between drivers and device tree quirks, this
change introduces a simple I2C component probe function. For a given
class of devices on the same I2C bus, it will go through all of them,
doing a simple I2C read transfer and see which one of them responds. It
will then enable the device that responds.
-----BEGIN PGP SIGNATURE-----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=MAxU
-----END PGP SIGNATURE-----
Merge tag 'i2c-for-6.13-rc1-part3' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c component probing support from Wolfram Sang:
"Add OF component probing.
Some devices are designed and manufactured with some components having
multiple drop-in replacement options. These components are often
connected to the mainboard via ribbon cables, having the same signals
and pin assignments across all options. These may include the display
panel and touchscreen on laptops and tablets, and the trackpad on
laptops. Sometimes which component option is used in a particular
device can be detected by some firmware provided identifier, other
times that information is not available, and the kernel has to try to
probe each device.
Instead of a delicate dance between drivers and device tree quirks,
this change introduces a simple I2C component probe function. For a
given class of devices on the same I2C bus, it will go through all of
them, doing a simple I2C read transfer and see which one of them
responds. It will then enable the device that responds"
* tag 'i2c-for-6.13-rc1-part3' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
MAINTAINERS: fix typo in I2C OF COMPONENT PROBER
of: base: Document prefix argument for of_get_next_child_with_prefix()
i2c: Fix whitespace style issue
arm64: dts: mediatek: mt8173-elm-hana: Mark touchscreens and trackpads as fail
platform/chrome: Introduce device tree hardware prober
i2c: of-prober: Add GPIO support to simple helpers
i2c: of-prober: Add simple helpers for regulator support
i2c: Introduce OF component probe function
of: base: Add for_each_child_of_node_with_prefix()
of: dynamic: Add of_changeset_update_prop_string
- Remove unused bprintf() function
bprintf() was added with the rest of the "bin-printf" functions.
These are functions that are used by trace_printk() that allows to
quickly save the format and arguments into the ring buffer without
the expensive processing of converting numbers to ASCII. Then on
output, at a much later time, the ring buffer is read and the string
processing occurs then. The bprintf() was added for consistency but
was never used. It can be safely removed.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZ0yNShQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qmJ6AP9i8pFOjeMfb2hOBpJTzORkIXEbz5nG
OCK/5aeSdjxy8QEAqafBSr5IQOxaTCFve1p7WSwdgmi2ZLmqEasaud0LmAk=
=5bp1
-----END PGP SIGNATURE-----
Merge tag 'trace-printf-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull bprintf() removal from Steven Rostedt:
- Remove unused bprintf() function, that was added with the rest of the
"bin-printf" functions.
These are functions that are used by trace_printk() that allows to
quickly save the format and arguments into the ring buffer without
the expensive processing of converting numbers to ASCII. Then on
output, at a much later time, the ring buffer is read and the string
processing occurs then. The bprintf() was added for consistency but
was never used. It can be safely removed.
* tag 'trace-printf-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
printf: Remove unused 'bprintf'
signals if some of the group's threads are exiting
- Fix a hang caused by ndelay() calling the wrong delay function __udelay()
- Fix a wrong offset calculation in adjtimex(2) when using ADJ_MICRO
(microsecond resolution) and a negative offset
-----BEGIN PGP SIGNATURE-----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=X4bb
-----END PGP SIGNATURE-----
Merge tag 'timers_urgent_for_v6.13_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fixes from Borislav Petkov:
- Fix a case where posix timers with a thread-group-wide target would
miss signals if some of the group's threads are exiting
- Fix a hang caused by ndelay() calling the wrong delay function
__udelay()
- Fix a wrong offset calculation in adjtimex(2) when using ADJ_MICRO
(microsecond resolution) and a negative offset
* tag 'timers_urgent_for_v6.13_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
posix-timers: Target group sigqueue to current task only if not exiting
delay: Fix ndelay() spuriously treated as udelay()
ntp: Remove invalid cast in time offset math
fix some Marvell Armada platforms
- Add a workaround for Hisilicon ITS erratum 162100801 which can cause some
virtual interrupts to get lost
- More platform_driver::remove() conversion
-----BEGIN PGP SIGNATURE-----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=xeni
-----END PGP SIGNATURE-----
Merge tag 'irq_urgent_for_v6.13_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Borislav Petkov:
- Move the ->select callback to the correct ops structure in
irq-mvebu-sei to fix some Marvell Armada platforms
- Add a workaround for Hisilicon ITS erratum 162100801 which can cause
some virtual interrupts to get lost
- More platform_driver::remove() conversion
* tag 'irq_urgent_for_v6.13_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip: Switch back to struct platform_driver::remove()
irqchip/gicv3-its: Add workaround for hip09 ITS erratum 162100801
irqchip/irq-mvebu-sei: Move misplaced select() callback to SEI CP domain
by erratum 1386 so that the matching loop actually terminates instead of
going off into the weeds
- Update the boot protocol documentation to mention the fact that the
preferred address to load the kernel to is considered in the relocatable
kernel case too
- Flush the memory buffer containing the microcode patch after applying
microcode on AMD Zen1 and Zen2, to avoid unnecessary slowdowns
- Make sure the PPIN CPU feature flag is cleared on all CPUs if PPIN has been
disabled
-----BEGIN PGP SIGNATURE-----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=RC2M
-----END PGP SIGNATURE-----
Merge tag 'x86_urgent_for_v6.13_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- Add a terminating zero end-element to the array describing AMD CPUs
affected by erratum 1386 so that the matching loop actually
terminates instead of going off into the weeds
- Update the boot protocol documentation to mention the fact that the
preferred address to load the kernel to is considered in the
relocatable kernel case too
- Flush the memory buffer containing the microcode patch after applying
microcode on AMD Zen1 and Zen2, to avoid unnecessary slowdowns
- Make sure the PPIN CPU feature flag is cleared on all CPUs if PPIN
has been disabled
* tag 'x86_urgent_for_v6.13_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/CPU/AMD: Terminate the erratum_1386_microcode array
x86/Documentation: Update algo in init_size description of boot protocol
x86/microcode/AMD: Flush patch buffer mapping after application
x86/mm: Carve out INVLPG inline asm for use by others
x86/cpu: Fix PPIN initialization
The point behind strscpy() was to once and for all avoid all the
problems with 'strncpy()' and later broken "fixed" versions like
strlcpy() that just made things worse.
So strscpy not only guarantees NUL-termination (unlike strncpy), it also
doesn't do unnecessary padding at the destination. But at the same time
also avoids byte-at-a-time reads and writes by _allowing_ some extra NUL
writes - within the size, of course - so that the whole copy can be done
with word operations.
It is also stable in the face of a mutable source string: it explicitly
does not read the source buffer multiple times (so an implementation
using "strnlen()+memcpy()" would be wrong), and does not read the source
buffer past the size (like the mis-design that is strlcpy does).
Finally, the return value is designed to be simple and unambiguous: if
the string cannot be copied fully, it returns an actual negative error,
making error handling clearer and simpler (and the caller already knows
the size of the buffer). Otherwise it returns the string length of the
result.
However, there was one final stability issue that can be important to
callers: the stability of the destination buffer.
In particular, the same way we shouldn't read the source buffer more
than once, we should avoid doing multiple writes to the destination
buffer: first writing a potentially non-terminated string, and then
terminating it with NUL at the end does not result in a stable result
buffer.
Yes, it gives the right result in the end, but if the rule for the
destination buffer was that it is _always_ NUL-terminated even when
accessed concurrently with updates, the final byte of the buffer needs
to always _stay_ as a NUL byte.
[ Note that "final byte is NUL" here is literally about the final byte
in the destination array, not the terminating NUL at the end of the
string itself. There is no attempt to try to make concurrent reads and
writes give any kind of consistent string length or contents, but we
do want to guarantee that there is always at least that final
terminating NUL character at the end of the destination array if it
existed before ]
This is relevant in the kernel for the tsk->comm[] array, for example.
Even without locking (for either readers or writers), we want to know
that while the buffer contents may be garbled, it is always a valid C
string and always has a NUL character at 'comm[TASK_COMM_LEN-1]' (and
never has any "out of thin air" data).
So avoid any "copy possibly non-terminated string, and terminate later"
behavior, and write the destination buffer only once.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
bprintf() is unused. Remove it. It was added in the commit 4370aa4aa753
("vsprintf: add binary printf") but as far as I can see was never used,
unlike the other two functions in that patch.
Link: https://lore.kernel.org/20241002173147.210107-1-linux@treblig.org
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Acked-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
-----BEGIN PGP SIGNATURE-----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=bPnr
-----END PGP SIGNATURE-----
Merge tag 'pci-v6.13-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull PCI fix from Bjorn Helgaas:
- When removing a PCI device, only look up and remove a platform device
if there is an associated device node for which there could be a
platform device, to fix a merge window regression (Brian Norris)
* tag 'pci-v6.13-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
PCI/pwrctrl: Unregister platform device only if one actually exists
-----BEGIN PGP SIGNATURE-----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=ZCsN
-----END PGP SIGNATURE-----
Merge tag 'lsm-pr-20241129' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm
Pull ima fix from Paul Moore:
"One small patch to fix a function parameter / local variable naming
snafu that went up to you in the current merge window"
* tag 'lsm-pr-20241129' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm:
ima: uncover hidden variable in ima_match_rules()
-----BEGIN PGP SIGNATURE-----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=6cbB
-----END PGP SIGNATURE-----
Merge tag 'block-6.13-20242901' of git://git.kernel.dk/linux
Pull more block updates from Jens Axboe:
- NVMe pull request via Keith:
- Use correct srcu list traversal (Breno)
- Scatter-gather support for metadata (Keith)
- Fabrics shutdown race condition fix (Nilay)
- Persistent reservations updates (Guixin)
- Add the required bits for MD atomic write support for raid0/1/10
- Correct return value for unknown opcode in ublk
- Fix deadlock with zone revalidation
- Fix for the io priority request vs bio cleanups
- Use the correct unsigned int type for various limit helpers
- Fix for a race in loop
- Cleanup blk_rq_prep_clone() to prevent uninit-value warning and make
it easier for actual humans to read
- Fix potential UAF when iterating tags
- A few fixes for bfq-iosched UAF issues
- Fix for brd discard not decrementing the allocated page count
- Various little fixes and cleanups
* tag 'block-6.13-20242901' of git://git.kernel.dk/linux: (36 commits)
brd: decrease the number of allocated pages which discarded
block, bfq: fix bfqq uaf in bfq_limit_depth()
block: Don't allow an atomic write be truncated in blkdev_write_iter()
mq-deadline: don't call req_get_ioprio from the I/O completion handler
block: Prevent potential deadlock in blk_revalidate_disk_zones()
block: Remove extra part pointer NULLify in blk_rq_init()
nvme: tuning pr code by using defined structs and macros
nvme: introduce change ptpl and iekey definition
block: return bool from get_disk_ro and bdev_read_only
block: remove a duplicate definition for bdev_read_only
block: return bool from blk_rq_aligned
block: return unsigned int from blk_lim_dma_alignment_and_pad
block: return unsigned int from queue_dma_alignment
block: return unsigned int from bdev_io_opt
block: req->bio is always set in the merge code
block: don't bother checking the data direction for merges
block: blk-mq: fix uninit-value in blk_rq_prep_clone and refactor
Revert "block, bfq: merge bfq_release_process_ref() into bfq_put_cooperator()"
md/raid10: Atomic write support
md/raid1: Atomic write support
...
-----BEGIN PGP SIGNATURE-----
iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAmdJ6igQHGF4Ym9lQGtl
cm5lbC5kawAKCRD301j7KXHgpjj3D/44ltUzbKLiGRE8wvtyWSFdAeGUT8DA0MTW
ot+Tr43PY6+J+v5ClUmgzJYqLRjNUxJAGUWM8Tmr7tZ2UtKwhHX/CEUtbqOEm2Sg
e6aofpzR+sXX+ZqZRrLMPj6gLvuklWra+1STyzA6EkcvLiMqsLCY/U8nIm03VW26
ua0kj+5477pEo9Hei4mfLtHCad94IX6UAv5xuh+90Xo9zxdWYA5sCv6SpXlG/5vy
VYF8yChIiQC3SBgs1ewALblkm2RsCU59p0/9mOHOeBYzaFnoOV66fHEawWwKF2qM
FLp6ZKpFEgxiRW9JpxhUw8Pv0hQx5FWN15FLLTPb/ss4Xo5uFRq8+0fDP8S5U9OT
T37sj1nej7adaSjRWkmrgclNggFyhMmoCO9jMWxO1dmWNtHB153xGWNUcd0v/P2+
FdjibQd79Wpq7aWbKPOQORU8rqshNusUVlge/KlvyufEne9EuOQVjGk/i2AEjU5y
f1DomdUbEBeGB2FE7w0YYquI0oBOLQvBBk/hQl5pW7rfMgFoU0WAXiZLaJhM0i81
RgbI5FH1rFZtsnJ3kG6HpNPcibK2seip6weNfgZZnDZCSOHiCZbuxi+WBLtupKng
8J+ZXoDjucBVRgrUQRz6Km62oTLJQ/6CcazqrKvLxERa0eB6SNOxZRd1XYNFKacn
xIyyyzQj1g==
=b84h
-----END PGP SIGNATURE-----
Merge tag 'io_uring-6.13-20242901' of git://git.kernel.dk/linux
Pull more io_uring updates from Jens Axboe:
- Remove a leftover struct from when the cqwait registered waiting was
transitioned to regions.
- Fix for an issue introduced in this merge window, where nop->fd might
be used uninitialized. Ensure it's always set.
- Add capping of the task_work run in local task_work mode, to prevent
bursty and long chains from adding too much latency.
- Work around xa_store() leaving ->head non-NULL if it encounters an
allocation error during storing. Just a debug trigger, and can go
away once xa_store() behaves in a more expected way for this
condition. Not a major thing as it basically requires fault injection
to trigger it.
- Fix a few mapping corner cases
- Fix KCSAN complaint on reading the table size post unlock. Again not
a "real" issue, but it's easy to silence by just keeping the reading
inside the lock that protects it.
* tag 'io_uring-6.13-20242901' of git://git.kernel.dk/linux:
io_uring/tctx: work around xa_store() allocation error issue
io_uring: fix corner case forgetting to vunmap
io_uring: fix task_work cap overshooting
io_uring: check for overflows in io_pin_pages
io_uring/nop: ensure nop->fd is always initialized
io_uring: limit local tw done
io_uring: add io_local_work_pending()
io_uring/region: return negative -E2BIG in io_create_region()
io_uring: protect register tracing
io_uring: remove io_uring_cqwait_reg_arg
* Fixes.
RISC-V:
* Svade and Svadu (accessed and dirty bit) extension support for host and
guest. This was acked on the mailing list by the RISC-V maintainer, see
https://patchew.org/linux/20240726084931.28924-1-yongxuan.wang@sifive.com/.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmdKS0QUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroP7hggAmt5CJesFGIuDwQgJX1KuNWAS84AX
Oq5SPZLH0XjE5YDm6AusSzvbtOhRM6mARU5/iqMRE6Mqpf4MXpP9tOo6xaDiL7+m
bOFsDYEO73WQyrIfFUCZ7dXiTbDVtQfNH8Z1yQwHPsa1d+WDYY3tLbCe5qCdqYMF
JDiB7K0cQzPDmhCwf3Zf8mW2ZRI0QsTqiuFUfVGGNgFDspWfBFBqkLCkrMNmbp9z
ye375oKb2VCe6OBJCY+Nl6tdoBUkz+CtZDCxkxuh0Uk4NmsUC9JMye9iwgU9DuI7
nagFuvpUGcgbZvrx1ly47TL+wcEFLwnBJ0xBZTGIgVoZHj/wX9GM+tSgIw==
=semZ
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull more kvm updates from Paolo Bonzini:
- ARM fixes
- RISC-V Svade and Svadu (accessed and dirty bit) extension support for
host and guest
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: riscv: selftests: Add Svade and Svadu Extension to get-reg-list test
RISC-V: KVM: Add Svade and Svadu Extensions Support for Guest/VM
dt-bindings: riscv: Add Svade and Svadu Entries
RISC-V: Add Svade and Svadu Extensions Support
KVM: arm64: Use MDCR_EL2.HPME to evaluate overflow of hyp counters
KVM: arm64: Ignore PMCNTENSET_EL0 while checking for overflow status
KVM: arm64: Mark set_sysreg_masks() as inline to avoid build failure
KVM: arm64: vgic-its: Add stronger type-checking to the ITS entry sizes
KVM: arm64: vgic: Kill VGIC_MAX_PRIVATE definition
KVM: arm64: vgic: Make vgic_get_irq() more robust
KVM: arm64: vgic-v3: Sanitise guest writes to GICR_INVLPIR
