The devicetree changes overall are again dominated by the Qualcomm
Snapdragon platform that weighs in at over 300 changesets, but there
are many updates across other platforms as well, notably Mediatek, NXP,
Rockchips, Renesas, TI, Samsung and ST Microelectronics. These all
add new features for existing machines, as well as new machines and
SoCs.
The newly added SoCs are:
- Allwinner T113-s, an Cortex-A7 based variant of the RISC-V
based D1 chip.
- StarFive JH7110, a RISC-V SoC based on the Sifive U74 core
like its JH7100 predecessor, but with additional CPU cores
and a GPU.
- Apple M2 as used in current Macbook Air/Pro and Mac Mini
gets added, with comparable support as its M1 predecessor.
- Unisoc UMS512 (Tiger T610) is a midrange smartphone SoC
- Qualcomm IPQ5332 and IPQ9574 are Wi-Fi 7 networking SoCs,
based on the Cortex-A53 and Cortex-A73 cores, respectively.
- Qualcomm sa8775p is an automotive SoC derived from the
Snapdragon family.
Including the initial board support for the added SoC platforms,
there are 52 new machines. The largest group are 19 boards
industrial embedded boards based on the NXP i.MX6 (32-bit)
and i.MX8 (64-bit) families.
Others include:
- Two boards based on the Allwinner f1c200s ultra-low-cost chip
- Three "Banana Pi" variants based on the Amlogic g12b
(A311D, S922X) SoC.
- The Gl.Inet mv1000 router based on Marvell Armada 3720
- A Wifi/LTE Dongle based on Qualcomm msm8916
- Two robotics boards based on Qualcomm QRB chips
- Three Snapdragon based phones made by Xiaomi
- Five developments boards based on various Rockchip SoCs,
including the rk3588s-khadas-edge2 and a few NanoPi
models
- The AM625 Beagleplay industrial SBC
Another 14 machines get removed: both boards for the obsolete "oxnas"
platform, three boards for the Renesas r8a77950 SoC that were only for
pre-production chips, and various chromebook models based on the Qualcomm
Sc7180 "trogdor" design that were never part of products.
-----BEGIN PGP SIGNATURE-----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=j12m
-----END PGP SIGNATURE-----
Merge tag 'soc-dt-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC devicetree updates from Arnd Bergmann:
"The devicetree changes overall are again dominated by the Qualcomm
Snapdragon platform that weighs in at over 300 changesets, but there
are many updates across other platforms as well, notably Mediatek,
NXP, Rockchips, Renesas, TI, Samsung and ST Microelectronics. These
all add new features for existing machines, as well as new machines
and SoCs.
The newly added SoCs are:
- Allwinner T113-s, an Cortex-A7 based variant of the RISC-V based D1
chip.
- StarFive JH7110, a RISC-V SoC based on the Sifive U74 core like its
JH7100 predecessor, but with additional CPU cores and a GPU.
- Apple M2 as used in current Macbook Air/Pro and Mac Mini gets
added, with comparable support as its M1 predecessor.
- Unisoc UMS512 (Tiger T610) is a midrange smartphone SoC
- Qualcomm IPQ5332 and IPQ9574 are Wi-Fi 7 networking SoCs, based on
the Cortex-A53 and Cortex-A73 cores, respectively.
- Qualcomm sa8775p is an automotive SoC derived from the Snapdragon
family.
Including the initial board support for the added SoC platforms, there
are 52 new machines. The largest group are 19 boards industrial
embedded boards based on the NXP i.MX6 (32-bit) and i.MX8 (64-bit)
families.
Others include:
- Two boards based on the Allwinner f1c200s ultra-low-cost chip
- Three 'Banana Pi' variants based on the Amlogic g12b (A311D, S922X)
SoC.
- The Gl.Inet mv1000 router based on Marvell Armada 3720
- A Wifi/LTE Dongle based on Qualcomm msm8916
- Two robotics boards based on Qualcomm QRB chips
- Three Snapdragon based phones made by Xiaomi
- Five developments boards based on various Rockchip SoCs, including
the rk3588s-khadas-edge2 and a few NanoPi models
- The AM625 Beagleplay industrial SBC
Another 14 machines get removed: both boards for the obsolete 'oxnas'
platform, three boards for the Renesas r8a77950 SoC that were only for
pre-production chips, and various chromebook models based on the
Qualcomm Sc7180 'trogdor' design that were never part of products"
* tag 'soc-dt-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (836 commits)
arm64: dts: rockchip: Add support for volume keys to rk3399-pinephone-pro
arm64: dts: rockchip: Add vdd_cpu_big regulators to rk3588-rock-5b
arm64: dts: rockchip: Use generic name for es8316 on Pinebook Pro and Rock 5B
arm64: dts: rockchip: Drop RTC clock-frequency on rk3588-rock-5b
arm64: dts: apple: t8112: Add PWM controller
arm64: dts: apple: t600x: Add PWM controller
arm64: dts: apple: t8103: Add PWM controller
arm64: dts: rockchip: Add pinctrl gpio-ranges for rk356x
ARM: dts: nomadik: Replace deprecated spi-gpio properties
ARM: dts: aspeed-g6: Add UDMA node
ARM: dts: aspeed: greatlakes: add mctp device
ARM: dts: aspeed: greatlakes: Add gpio names
ARM: dts: aspeed: p10bmc: Change power supply info
arm64: dts: mediatek: mt6795-xperia-m5: Add Bosch BMM050 Magnetometer
arm64: dts: mediatek: mt6795-xperia-m5: Add Bosch BMA255 Accelerometer
arm64: dts: mediatek: mt6795: Add tertiary PWM node
arm64: dts: rockchip: add panel to Anbernic RG353 series
dt-bindings: arm: Add Data Modul i.MX8M Plus eDM SBC
dt-bindings: arm: fsl: Add chargebyte Tarragon
dt-bindings: vendor-prefixes: add chargebyte
...
This code was added more than 20 years ago. [1]
I checked the kernel spec files in Fedora and OpenSUSE, but did not
see 'kernel-drm'. I do not know if there exists a distro that uses it
in RPM dependency.
Remove this, and let's see if somebody complains about it.
[1]: https://git.kernel.org/pub/scm/linux/kernel/git/history/history.git/commit/?id=6d956df7d6b716b28c910c4f5b360c4d44d96c4d
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Add KDEB_SOURCE_COMPRESS to specify the compression for the orig and
debian tarballs. (cf. the existing KDEB_COMPRESS is used to specify
the compression for binary packages.)
Supported algorithms are gzip, bzip2, lzma, and xz, all of which are
supported by dpkg-source.
The current default is gzip. You can change it via the environment
variable, for example, 'KDEB_SOURCE_COMPRESS=xz make deb-pkg'.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
o MAINTAINERS files additions and changes.
o Fix hotplug warning in nohz code.
o Tick dependency changes by Zqiang.
o Lazy-RCU shrinker fixes by Zqiang.
o rcu-tasks stall reporting improvements by Neeraj.
o Initial changes for renaming of k[v]free_rcu() to its new k[v]free_rcu_mightsleep()
name for robustness.
o Documentation Updates:
o Significant changes to srcu_struct size.
o Deadlock detection for srcu_read_lock() vs synchronize_srcu() from Boqun.
o rcutorture and rcu-related tool, which are targeted for v6.4 from Boqun's tree.
o Other misc changes.
-----BEGIN PGP SIGNATURE-----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=Rgbj
-----END PGP SIGNATURE-----
Merge tag 'rcu.6.4.april5.2023.3' of git://git.kernel.org/pub/scm/linux/kernel/git/jfern/linux
Pull RCU updates from Joel Fernandes:
- Updates and additions to MAINTAINERS files, with Boqun being added to
the RCU entry and Zqiang being added as an RCU reviewer.
I have also transitioned from reviewer to maintainer; however, Paul
will be taking over sending RCU pull-requests for the next merge
window.
- Resolution of hotplug warning in nohz code, achieved by fixing
cpu_is_hotpluggable() through interaction with the nohz subsystem.
Tick dependency modifications by Zqiang, focusing on fixing usage of
the TICK_DEP_BIT_RCU_EXP bitmask.
- Avoid needless calls to the rcu-lazy shrinker for CONFIG_RCU_LAZY=n
kernels, fixed by Zqiang.
- Improvements to rcu-tasks stall reporting by Neeraj.
- Initial renaming of k[v]free_rcu() to k[v]free_rcu_mightsleep() for
increased robustness, affecting several components like mac802154,
drbd, vmw_vmci, tracing, and more.
A report by Eric Dumazet showed that the API could be unknowingly
used in an atomic context, so we'd rather make sure they know what
they're asking for by being explicit:
https://lore.kernel.org/all/20221202052847.2623997-1-edumazet@google.com/
- Documentation updates, including corrections to spelling,
clarifications in comments, and improvements to the srcu_size_state
comments.
- Better srcu_struct cache locality for readers, by adjusting the size
of srcu_struct in support of SRCU usage by Christoph Hellwig.
- Teach lockdep to detect deadlocks between srcu_read_lock() vs
synchronize_srcu() contributed by Boqun.
Previously lockdep could not detect such deadlocks, now it can.
- Integration of rcutorture and rcu-related tools, targeted for v6.4
from Boqun's tree, featuring new SRCU deadlock scenarios, test_nmis
module parameter, and more
- Miscellaneous changes, various code cleanups and comment improvements
* tag 'rcu.6.4.april5.2023.3' of git://git.kernel.org/pub/scm/linux/kernel/git/jfern/linux: (71 commits)
checkpatch: Error out if deprecated RCU API used
mac802154: Rename kfree_rcu() to kvfree_rcu_mightsleep()
rcuscale: Rename kfree_rcu() to kfree_rcu_mightsleep()
ext4/super: Rename kfree_rcu() to kfree_rcu_mightsleep()
net/mlx5: Rename kfree_rcu() to kfree_rcu_mightsleep()
net/sysctl: Rename kvfree_rcu() to kvfree_rcu_mightsleep()
lib/test_vmalloc.c: Rename kvfree_rcu() to kvfree_rcu_mightsleep()
tracing: Rename kvfree_rcu() to kvfree_rcu_mightsleep()
misc: vmw_vmci: Rename kvfree_rcu() to kvfree_rcu_mightsleep()
drbd: Rename kvfree_rcu() to kvfree_rcu_mightsleep()
rcu: Protect rcu_print_task_exp_stall() ->exp_tasks access
rcu: Avoid stack overflow due to __rcu_irq_enter_check_tick() being kprobe-ed
rcu-tasks: Report stalls during synchronize_srcu() in rcu_tasks_postscan()
rcu: Permit start_poll_synchronize_rcu_expedited() to be invoked early
rcu: Remove never-set needwake assignment from rcu_report_qs_rdp()
rcu: Register rcu-lazy shrinker only for CONFIG_RCU_LAZY=y kernels
rcu: Fix missing TICK_DEP_MASK_RCU_EXP dependency check
rcu: Fix set/clear TICK_DEP_BIT_RCU_EXP bitmask race
rcu/trace: use strscpy() to instead of strncpy()
tick/nohz: Fix cpu_is_hotpluggable() by checking with nohz subsystem
...
Intel compiler support has already been completely removed in commit
95207db8166a ("Remove Intel compiler support"). However, it appears
that there is still some ICC-related code in scripts/cc-version.sh.
There is no harm in leaving the code as it is, but removing the dead
code makes the codebase a bit cleaner.
Hopefully all ICC-related stuff in the build scripts will be removed
after this commit, given the grep output as below:
(linux/scripts) $ grep -i -w -R 'icc'
cc-version.sh:ICC)
cc-version.sh: min_version=$($min_tool_version icc)
dtc/include-prefixes/arm64/qcom/sm6350.dtsi:#include <dt-bindings/interconnect/qcom,icc.h>
Fixes: 95207db8166a ("Remove Intel compiler support")
Signed-off-by: Ruihan Li <lrh2000@pku.edu.cn>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- Fix the prefix in the kernel source tarball
- Fix a typo in the copyright file in Debian package
-----BEGIN PGP SIGNATURE-----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=CqGk
-----END PGP SIGNATURE-----
Merge tag 'kbuild-fixes-v6.3-4' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Fix the prefix in the kernel source tarball
- Fix a typo in the copyright file in Debian package
* tag 'kbuild-fixes-v6.3-4' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: use proper prefix for tarballs to fix rpm-pkg build error
kbuild: deb-pkg: Fix a spell typo in mkdebian script
This new target builds only the debian source package.
Unify the build rules of deb-pkg, srcdeb-pkg, bindeb-pkg to avoid
code duplication.
--no-check-builddeps is added to srcdeb-pkg so that build dependencies
will not be checked.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
Since commit f8d94c4e403c ("kbuild: do not create intermediate *.tar
for source tarballs"), 'make rpm-pkg' fails because the prefix of the
source tarball is 'linux.tar/' instead of 'linux/'. $(basename $@)
strips only '.gz' from the filename linux.tar.gz.
You need to strip two suffixes from compressed tarballs and one suffix
from uncompressed tarballs (for example 'perf-6.3.0.tar' generated by
'make perf-tar-src-pkg').
One tricky fix might be --prefix=$(firstword $(subst .tar, ,$@))/
but I think it is better to hard-code the prefix.
Fixes: f8d94c4e403c ("kbuild: do not create intermediate *.tar for source tarballs")
Reported-by: Jiwei Sun <sunjw10@lenovo.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
It seems there is a misprint in the check of strdup() return code that
can lead to NULL pointer dereference.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 4520c6a49af8 ("X.509: Add simple ASN.1 grammar compiler")
Signed-off-by: Ekaterina Orlova <vorobushek.ok@gmail.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jarkko Sakkinen <jarkko@kernel.org>
Cc: keyrings@vger.kernel.org
Cc: linux-kbuild@vger.kernel.org
Link: https://lore.kernel.org/r/20230315172130.140-1-vorobushek.ok@gmail.com/
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- Build: Rust + GCC build fix and 'grep' warning fix.
- Code: Missing 'extern "C"' fix.
- Scripts: 'is_rust_module.sh' and 'generate_rust_analyzer.py' fixes.
- A couple trivial fixes.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEPjU5OPd5QIZ9jqqOGXyLc2htIW0FAmRAKacACgkQGXyLc2ht
IW33VRAAglNS0O0ErOmHRdlwLx2kZXhXGAPtgLe6w0BSe46zdfBs/Y2dEqQZWzSX
pfYDjLfVlmrObgOA9HkXR22gYaWfTPc0qCIhIKmkkQgF4q/VjMLl5QaU6fBAzz6k
J7OqJmg5NeKMQW9G6CGJdkk9XldeIlEBi9C0P+YsaU/8N6PO0BNhYTaenbKRbusC
kcjFMjekQlYEHsaX4flTXNKGSbg+tBi4igiBwcbQE/uy7l75mECHIUeQbXZMyp4b
lWGMl8CdlYFLJRB4oxxvOQ3JgTdq9thVXu3WTK+ETs7tBNu9VB8zKuP+iOcpPjrX
3Djt5QBL2+O3jPIrUKQfMK1Ejxh/BIHTy5643hSgppQg4+Y33RW8xKp1YHqSof46
SNVJ9taQ9nnLNviNbtxXEN2Zj00jGgOa2qqXfycJwJvWPFI+VVgHvkbfvhKYJzJ/
swVDCuYmdh74DgdwvOb4dwZqEpLwC+V8T4ll2EUpR/CLYf4FGyRAmbaxSVKzP/JT
M/R7tDq10xvVB4rJsqwHri3nB0rmSM6+7fYiQHlwEGt6wImDSy0N9y1BcCZ+ckHW
TmEjx93e6SjXiQKr98suBVC0W+GnHk+MN39rDhZbNJB74EBwGFEmrMweRTeFv9ya
OuXkQOa3xOFt9E/eb26sPN0/sEJexnMu4vXEzCGBl51HcDqxQGQ=
=zdCa
-----END PGP SIGNATURE-----
Merge tag 'rust-fixes-6.3' of https://github.com/Rust-for-Linux/linux
Pull Rust fixes from Miguel Ojeda:
"Most of these are straightforward.
The last one is more complex, but it only touches Rust + GCC builds
which are for the moment best-effort.
- Code: Missing 'extern "C"' fix.
- Scripts: 'is_rust_module.sh' and 'generate_rust_analyzer.py' fixes.
- A couple trivial fixes
- Build: Rust + GCC build fix and 'grep' warning fix"
* tag 'rust-fixes-6.3' of https://github.com/Rust-for-Linux/linux:
rust: allow to use INIT_STACK_ALL_ZERO
rust: fix regexp in scripts/is_rust_module.sh
rust: build: Fix grep warning
scripts: generate_rust_analyzer: Handle sub-modules with no Makefile
rust: kernel: Mark rust_fmt_argument as extern "C"
rust: sort uml documentation arch support table
rust: str: fix requierments->requirements typo
nm can use "R" or "r" to show read-only data sections, but
scripts/is_rust_module.sh can only recognize "r", so with some versions
of binutils it can fail to detect if a module is a Rust module or not.
Right now we're using this script only to determine if we need to skip
BTF generation (that is disabled globally if CONFIG_RUST is enabled),
but it's still nice to fix this script to do the proper job.
Moreover, with this patch applied I can also relax the constraint of
"RUST depends on !DEBUG_INFO_BTF" and build a kernel with Rust and BTF
enabled at the same time (of course BTF generation is still skipped for
Rust modules).
[ Miguel: The actual reason is likely to be a change on the Rust
compiler between 1.61.0 and 1.62.0:
echo '#[used] static S: () = ();' |
rustup run 1.61.0 rustc --emit=obj --crate-type=lib - &&
nm rust_out.o
echo '#[used] static S: () = ();' |
rustup run 1.62.0 rustc --emit=obj --crate-type=lib - &&
nm rust_out.o
Gives:
0000000000000000 r _ZN8rust_out1S17h48027ce0da975467E
0000000000000000 R _ZN8rust_out1S17h58e1f3d9c0e97cefE
See https://godbolt.org/z/KE6jneoo4. ]
Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
Reviewed-by: Vincenzo Palazzo <vincenzopalazzodev@gmail.com>
Reviewed-by: Eric Curtin <ecurtin@redhat.com>
Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Relocating kernel at runtime is done very early in the boot process, so
it is not convenient to check for relocations there and react in case a
relocation was not expected.
Powerpc architecture has a script that allows to check at compile time
for such unexpected relocations: extract the common logic to scripts/
so that other architectures can take advantage of it.
Signed-off-by: Alexandre Ghiti <alex@ghiti.fr>
Reviewed-by: Anup Patel <anup@brainfault.org>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Link: https://lore.kernel.org/r/20230329045329.64565-5-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
All headers from 'include/dt-bindings/' must be verified by checkpatch
together with Documentation bindings, because all of them are part of the
whole DT bindings system.
The requirement is dual licensed and matching patterns:
* Schemas:
/GPL-2\.0(?:-only)? OR BSD-2-Clause/
* Headers:
/GPL-2\.0(?:-only)? OR \S+/
Above patterns suggested by Rob at:
https://lore.kernel.org/all/CAL_Jsq+-YJsBO+LuPJ=ZQ=eb-monrwzuCppvReH+af7hYZzNaQ@mail.gmail.com
The issue was found during patch review:
https://lore.kernel.org/all/20230313201259.19998-4-ddrokosov@sberdevices.ru/
Link: https://lkml.kernel.org/r/20230404191715.7319-1-ddrokosov@sberdevices.ru
Signed-off-by: Dmitry Rokosov <ddrokosov@sberdevices.ru>
Reviewed-by: Rob Herring <robh@kernel.org>
Cc: Andy Whitcroft <apw@canonical.com>
Cc: Dwaipayan Ray <dwaipayanray1@gmail.com>
Cc: Joe Perches <joe@perches.com>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Cc: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
$lx_dentry_name() generates a full VFS path from a given dentry pointer,
and $lx_i_dentry() returns the dentry pointer associated with the given
inode pointer, if there is one.
Link: https://lkml.kernel.org/r/c9a5ad8efbfbd2cc6559e082734eed7628f43a16.1677631565.git.development@efficientek.com
Signed-off-by: Glenn Washburn <development@efficientek.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Antonio Borneo <antonio.borneo@foss.st.com>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Cc: John Ogness <john.ogness@linutronix.de>
Cc: Kieran Bingham <kbingham@kernel.org>
Cc: Petr Mladek <pmladek@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "GDB VFS utils".
I've created a couple GDB convenience functions that I found useful when
debugging some VFS issues and figure others might find them useful. For
instance, they are useful in setting conditional breakpoints on VFS
functions where you only care if the dentry path is a certain value. I
took the opportunity to create a new "vfs" python module to give VFS
related utilities a home.
This patch (of 2):
This will allow for more VFS specific GDB helpers to be collected in one
place. Move utils.dentry_name into the vfs modules. Also a local
variable in proc.py was changed from vfs to mnt to prevent a naming
collision with the new vfs module.
[akpm@linux-foundation.org: add SPDX-License-Identifier]
Link: https://lkml.kernel.org/r/cover.1677631565.git.development@efficientek.com
Link: https://lkml.kernel.org/r/7bba4c065a8c2c47f1fc5b03a7278005b04db251.1677631565.git.development@efficientek.com
Signed-off-by: Glenn Washburn <development@efficientek.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Antonio Borneo <antonio.borneo@foss.st.com>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Cc: John Ogness <john.ogness@linutronix.de>
Cc: Kieran Bingham <kbingham@kernel.org>
Cc: Petr Mladek <pmladek@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
join() expects strings but integers are given.
Convert chunks list to strings before passing it to join()
Link: https://lkml.kernel.org/r/20230406221217.1585486-4-f.fainelli@gmail.com
Signed-off-by: Amjad Ouled-Ameur <aouledameur@baylibre.com>
Signed-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
If CONFIG_DEBUG_INFO_REDUCED is enabled in the kernel configuration, we
will typically not be able to load vmlinux-gdb.py and will fail with:
Traceback (most recent call last):
File "/home/fainelli/work/buildroot/output/arm64/build/linux-custom/vmlinux-gdb.py", line 25, in <module>
import linux.utils
File "/home/fainelli/work/buildroot/output/arm64/build/linux-custom/scripts/gdb/linux/utils.py", line 131, in <module>
atomic_long_counter_offset = atomic_long_type.get_type()['counter'].bitpos
KeyError: 'counter'
Rather be left wondering what is happening only to find out that reduced
debug information is the cause, raise an eror. This was not typically a
problem until e3c8d33e0d62 ("scripts/gdb: fix 'lx-dmesg' on 32 bits arch")
but it has since then.
Link: https://lkml.kernel.org/r/20230406215252.1580538-1-f.fainelli@gmail.com
Fixes: e3c8d33e0d62 ("scripts/gdb: fix 'lx-dmesg' on 32 bits arch")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Cc: Antonio Borneo <antonio.borneo@foss.st.com>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Cc: John Ogness <john.ogness@linutronix.de>
Cc: Kieran Bingham <kbingham@kernel.org>
Cc: Petr Mladek <pmladek@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Linux makes use of the Radix Tree data structure to store pointers indexed
by integer values. This structure is utilised across many structures in
the kernel including the IRQ descriptor tables, and several filesystems.
This module provides a method to lookup values from a structure given its
head node.
Usage:
The function lx_radix_tree_lookup, must be given a symbol of type struct
radix_tree_root, and an index into that tree.
The object returned is a generic integer value, and must be cast correctly
to the type based on the storage in the data structure.
For example, to print the irq descriptor in the sparse irq_desc_tree at
index 18, try the following:
(gdb) print (struct irq_desc)$lx_radix_tree_lookup(irq_desc_tree, 18)
This script previously existed under commit
e127a73d41ac471d7e3ba950cf128f42d6ee3448 ("scripts/gdb: add a Radix Tree
Parser") and was later reverted with
b447e02548a3304c47b78b5e2d75a4312a8f17e1i (Revert "scripts/gdb: add a
Radix Tree Parser").
This version expects the XArray based radix tree implementation and has
been verified using QEMU/x86 on Linux 6.3-rc5.
[f.fainelli@gmail.com: revive and update for xarray implementation]
[f.fainelli@gmail.com: guard against a NULL node in the while loop]
Link: https://lkml.kernel.org/r/20230405222743.1191674-1-f.fainelli@gmail.com
Link: https://lkml.kernel.org/r/20230404214049.1016811-1-f.fainelli@gmail.com
Signed-off-by: Kieran Bingham <kieran.bingham@linaro.org>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Kieran Bingham <kbingham@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
"Link:" and "Closes:" tags have to be used with public URLs.
It is difficult to make sure the link is public but at least we can verify
the tag is followed by 'http(s)://'.
With that, we avoid such a tag that is not allowed [1]:
Closes: <number>
Now that we check the "link" tags are followed by a URL, we can relax the
check linked to "Reported-by being followed by a link tag" to only verify
if a "link" tag is present after the "Reported-by" one.
Link: https://lore.kernel.org/linux-doc/CAHk-=wh0v1EeDV3v8TzK81nDC40=XuTdY2MCr0xy3m3FiBV3+Q@mail.gmail.com/ [1]
Link: https://lkml.kernel.org/r/20230314-doc-checkpatch-closes-tag-v4-5-d26d1fa66f9f@tessares.net
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Acked-by: Joe Perches <joe@perches.com>
Cc: Andy Whitcroft <apw@canonical.com>
Cc: Bagas Sanjaya <bagasdotme@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: David Airlie <airlied@gmail.com>
Cc: Dwaipayan Ray <dwaipayanray1@gmail.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kai Wasserbäch <kai@dev.carbon-project.org>
Cc: Konstantin Ryabitsev <konstantin@linuxfoundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Cc: Thorsten Leemhuis <linux@leemhuis.info>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
As a follow-up of a previous patch modifying the documentation to allow
using the "Closes:" tag, checkpatch.pl is updated accordingly.
checkpatch.pl now no longer complain when the "Closes:" tag is used by
itself:
commit 76f381bb77a0 ("checkpatch: warn when unknown tags are used for links")
... or after the "Reported-by:" tag:
commit d7f1d71e5ef6 ("checkpatch: warn when Reported-by: is not followed by Link:")
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/373
Link: https://lkml.kernel.org/r/20230314-doc-checkpatch-closes-tag-v4-4-d26d1fa66f9f@tessares.net
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Acked-by: Joe Perches <joe@perches.com>
Cc: Andy Whitcroft <apw@canonical.com>
Cc: Bagas Sanjaya <bagasdotme@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: David Airlie <airlied@gmail.com>
Cc: Dwaipayan Ray <dwaipayanray1@gmail.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kai Wasserbäch <kai@dev.carbon-project.org>
Cc: Konstantin Ryabitsev <konstantin@linuxfoundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Cc: Thorsten Leemhuis <linux@leemhuis.info>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The following commit will allow the use of a similar "link" tag.
Because there is a possibility that other similar tags will be added in
the future and to reduce the number of places where the code will be
modified to allow this new tag, a list with all these "link" tags is now
used.
Two variables are created from it: one to search for such tags and one to
print all tags in a warning message.
Link: https://lkml.kernel.org/r/20230314-doc-checkpatch-closes-tag-v4-3-d26d1fa66f9f@tessares.net
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Suggested-by: Joe Perches <joe@perches.com>
Acked-by: Joe Perches <joe@perches.com>
Cc: Andy Whitcroft <apw@canonical.com>
Cc: Bagas Sanjaya <bagasdotme@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: David Airlie <airlied@gmail.com>
Cc: Dwaipayan Ray <dwaipayanray1@gmail.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kai Wasserbäch <kai@dev.carbon-project.org>
Cc: Konstantin Ryabitsev <konstantin@linuxfoundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Cc: Thorsten Leemhuis <linux@leemhuis.info>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When checking if "Reported-by" tag is followed by "Link:", there is no
need to print the next line if there is no next line.
While at it, also mention in this case that the "Link:" tag should be
followed by a URL, similar to the next warning.
By doing that, the code is now similar to what is done above when checking
if the Co-developed-by tag is properly used.
Link: https://lkml.kernel.org/r/20230314-doc-checkpatch-closes-tag-v4-2-d26d1fa66f9f@tessares.net
Fixes: d7f1d71e5ef6 ("checkpatch: warn when Reported-by: is not followed by Link:")
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Acked-by: Joe Perches <joe@perches.com>
Cc: Andy Whitcroft <apw@canonical.com>
Cc: Bagas Sanjaya <bagasdotme@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: David Airlie <airlied@gmail.com>
Cc: Dwaipayan Ray <dwaipayanray1@gmail.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kai Wasserbäch <kai@dev.carbon-project.org>
Cc: Konstantin Ryabitsev <konstantin@linuxfoundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Cc: Thorsten Leemhuis <linux@leemhuis.info>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
HRTIMER_MAX_CLOCK_BASES is of enum type hrtimer_base_type. To print it as
an integer, HRTIMER_MAX_CLOCK_BASES should be converted first.
Link: https://lkml.kernel.org/r/TYCP286MB214640FF0E7F04AC3926A39EC6819@TYCP286MB2146.JPNP286.PROD.OUTLOOK.COM
Signed-off-by: Peng Liu <liupeng17@lenovo.com>
Reviewed-by: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Kieran Bingham <kbingham@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Below incompatibilities between Python2 and Python3 made lx-timerlist fail
to run under Python3.
o xrange() is replaced by range() in Python3
o bytes and str are different types in Python3
o the return value of Inferior.read_memory() is memoryview object in
Python3
akpm: cc stable so that older kernels are properly debuggable under newer
Python.
Link: https://lkml.kernel.org/r/TYCP286MB2146EE1180A4D5176CBA8AB2C6819@TYCP286MB2146.JPNP286.PROD.OUTLOOK.COM
Signed-off-by: Peng Liu <liupeng17@lenovo.com>
Reviewed-by: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Kieran Bingham <kbingham@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
commit 511885d7061e ("lib/timerqueue: Rely on rbtree semantics for next
timer") changed struct timerqueue_head, and so print_active_timers()
should be changed accordingly with its way to interpret the structure.
Link: https://lkml.kernel.org/r/TYCP286MB21463BD277330B26DDC18903C6819@TYCP286MB2146.JPNP286.PROD.OUTLOOK.COM
Signed-off-by: Peng Liu <liupeng17@lenovo.com>
Reviewed-by: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Kieran Bingham <kbingham@kernel.org>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Some unknown -mllvm options (i.e. those starting with the letter "h")
don't cause an error to be returned by clang, so the cc-option helper adds
the unknown hwasan-kernel-mem-intrinsic-prefix=1 flag to CFLAGS with
compilers that are new enough for hwasan but too old for this option.
This causes a rather unreadable build failure:
fixdep: error opening file: scripts/mod/.empty.o.d: No such file or directory
make[4]: *** [/home/arnd/arm-soc/scripts/Makefile.build:252: scripts/mod/empty.o] Error 2
fixdep: error opening file: scripts/mod/.devicetable-offsets.s.d: No such file or directory
make[4]: *** [/home/arnd/arm-soc/scripts/Makefile.build:114: scripts/mod/devicetable-offsets.s] Error 2
Add a version check to only allow this option with clang-15, gcc-13
or later versions.
Link: https://lkml.kernel.org/r/20230418122350.1646391-1-arnd@kernel.org
Fixes: 51287dcb00cc ("kasan: emit different calls for instrumentable memintrinsics")
Link: https://lore.kernel.org/all/CANpmjNMwYosrvqh4ogDO8rgn+SeDHM2b-shD21wTypm_6MMe=g@mail.gmail.com/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Marco Elver <elver@google.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Nicolas Schier <nicolas@fjasle.eu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tom Rix <trix@redhat.com>
Cc: Vincenzo Frascino <Vincenzo.Frascino@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Commit 27f2a4db76e8 ("Makefile: fix GDB warning with CONFIG_RELR")
added --use-android-relr-tags to fix a GDB warning
BFD: /android0/linux-next/vmlinux: unknown type [0x13] section `.relr.dyn'
The GDB warning has been fixed in version 11.2.
The DT_ANDROID_RELR tag was deprecated since DT_RELR was standardized.
Thus, --use-android-relr-tags should be removed. While making the
change, try -z pack-relative-relocs, which is supported since LLD 15.
Keep supporting --pack-dyn-relocs=relr as well for older LLD versions.
There is no indication of obsolescence for --pack-dyn-relocs=relr.
As of today, GNU ld supports the latter option for x86 and powerpc64
ports and has no intention to support --pack-dyn-relocs=relr. In the
absence of the glibc symbol version GLIBC_ABI_DT_RELR,
--pack-dyn-relocs=relr and -z pack-relative-relocs are identical in
ld.lld.
GNU ld and newer versions of LLD report warnings (instead of errors) for
unknown -z options. Only errors lead to non-zero exit codes. Therefore,
we should test --pack-dyn-relocs=relr before testing
-z pack-relative-relocs.
Link: https://github.com/ClangBuiltLinux/linux/issues/1057
Link: https://sourceware.org/git/?p=binutils-gdb.git;a=commit;h=a619b58721f0a03fd91c27670d3e4c2fb0d88f1e
Signed-off-by: Fangrui Song <maskray@google.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
The target triple is overridden by the user-supplied CROSS_COMPILE,
but I do not see a good reason to support it. Users can use a new
architecture without adding CLANG_TARGET_FLAGS_*, but that would be
a rare case.
Use the hard-coded and deterministic target triple all the time.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
In the builddeb context, the DEB_HOST_ARCH environment variable is set
to the same value as debian/arch's content, so use the variable with
dpkg-architecture.
This is the last use of the debian/arch file during dpkg-buildpackage time.
Signed-off-by: Bastian Germann <bage@linutronix.de>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Commit 010a0aad39fc ("kallsyms: Correctly sequence symbols when
CONFIG_LTO_CLANG=y") added --lto-clang, and updated the usage()
function, but not the comment. Update it in the same way.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Currently, expand_symbol() is called many times to get the uncompressed
symbol names for sorting, and also for adding comments.
With the output order shuffled in the previous commit, the symbol data
are now written in the following order:
(1) kallsyms_num_syms
(2) kallsyms_names <-- need compressed names
(3) kallsyms_markers
(4) kallsyms_token_table
(5) kallsyms_token_index
(6) kallsyms_addressed / kallsyms_offsets <-- need uncompressed names (for commenting)
(7) kallsyms_relative_base
(8) kallsyms_seq_of_names <-- need uncompressed names (for sorting)
The compressed names are only needed by (2).
Call expand_symbol() between (2) and (3) to restore the original symbol
names. This requires just one expand_symbol() call for each symbol.
Call cleanup_symbol_name() between (7) and (8) instead of during sorting.
It is allowed to overwrite the ->sym field because (8) just outputs the
index instead of the name of each symbol. Again, this requires just one
cleanup_symbol_name() call for each symbol.
This refactoring makes it ~30% faster.
[Before]
$ time scripts/kallsyms --all-symbols --absolute-percpu --base-relative \
.tmp_vmlinux.kallsyms2.syms >/dev/null
real 0m1.027s
user 0m1.010s
sys 0m0.016s
[After]
$ time scripts/kallsyms --all-symbols --absolute-percpu --base-relative \
.tmp_vmlinux.kallsyms2.syms >/dev/null
real 0m0.717s
user 0m0.717s
sys 0m0.000s
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Currently, this tool outputs symbol data in the following order.
(1) kallsyms_addressed / kallsyms_offsets
(2) kallsyms_relative_base
(3) kallsyms_num_syms
(4) kallsyms_names
(5) kallsyms_markers
(6) kallsyms_seq_of_names
(7) kallsyms_token_table
(8) kallsyms_token_index
This commit changes the order as follows:
(1) kallsyms_num_syms
(2) kallsyms_names
(3) kallsyms_markers
(4) kallsyms_token_table
(5) kallsyms_token_index
(6) kallsyms_addressed / kallsyms_offsets
(7) kallsyms_relative_base
(8) kallsyms_seq_of_names
The motivation is to decrease the number of function calls to
expand_symbol() and cleanup_symbol_name().
The compressed names are only required for writing 'kallsyms_names'.
If you do this first, we can restore the original symbol names.
You do not need to repeat the same operation over again.
The actual refactoring will happen in the next commit.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
scripts/kallsyms.c maintains compiler-generated symbols, but we end up
with something similar in scripts/mksysmap to avoid the "Inconsistent
kallsyms data" error. For example, commit c17a2538704f ("mksysmap: Fix
the mismatch of 'L0' symbols in System.map").
They were separately maintained prior to commit 94ff2f63d6a3 ("kbuild:
reuse mksysmap output for kallsyms").
Now that scripts/kallsyms.c parses the output of scripts/mksysmap,
it makes more sense to collect all the ignored patterns to mksysmap.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Drop the symbols generated by scripts/kallsyms itself automatically
instead of maintaining the symbol list manually.
Pass the kallsyms object from the previous kallsyms step (if it exists)
as the third parameter of scripts/mksysmap, which will weed out the
generated symbols from the input to the next kallsyms step.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
It is not feasible to insert comments in a multi-line shell command.
Use sed, and move comments close to the code.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
The symbol types 'U' and 'N' are already filtered out by the following
line in scripts/mksysmap:
-e ' [aNUw] '
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
The assembler output of kallsyms.c is not meant for people to understand,
and is generally not helpful when debugging "Inconsistent kallsyms data"
warnings. I have previously struggled with these, but found it helpful
to list which symbols changed between the first and second pass in the
.tmp_vmlinux.kallsyms*.S files.
As this file is preprocessed, it's possible to add a C-style multiline
comment with the full type/name tuple.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Commit 05e96e96a315 ("kbuild: use git-archive for source package
creation") split the compression as a separate step to factor out
the common build rules.
With the previous commit, we got back to the situation where source
tarballs are compressed on-the-fly.
There is no reason to keep the separate compression rules.
Generate the comressed tar packages directly.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Since commit 05e96e96a315 ("kbuild: use git-archive for source package
creation"), a source tarball is created in two steps; create *.tar file
then compress it. I split the compression as a separate rule because I
just thought 'git archive' supported only gzip.
For other compression algorithms, I could pipe the two commands:
$ git archive HEAD | xz > linux.tar.xz
I read git-archive(1) carefully, and I realized GIT had provided a
more elegant way:
$ git -c tar.tar.xz.command=xz archive -o linux.tar.xz HEAD
This commit uses 'tar.tar.*.command' configuration to specify the
compression backend so we can compress a source tarball on-the-fly.
GIT commit 767cf4579f0e ("archive: implement configurable tar filters")
is more than a decade old, so it should be available on almost all build
environments.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
The two commands, cmd_archive_linux and cmd_archive_perf, are similar.
Merge them to make it easier to add more changes to the git-archive
command.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
The L0 symbol is generated when build module on LoongArch, ignore it in
modpost and when looking at module symbols, otherwise we can not see the
expected call trace.
Now is_arm_mapping_symbol() is not only for ARM, in order to reflect the
reality, rename is_arm_mapping_symbol() to is_mapping_symbol().
This is related with commit c17a2538704f ("mksysmap: Fix the mismatch of
'L0' symbols in System.map").
(1) Simple test case
[loongson@linux hello]$ cat hello.c
#include <linux/init.h>
#include <linux/module.h>
#include <linux/printk.h>
static void test_func(void)
{
pr_info("This is a test\n");
dump_stack();
}
static int __init hello_init(void)
{
pr_warn("Hello, world\n");
test_func();
return 0;
}
static void __exit hello_exit(void)
{
pr_warn("Goodbye\n");
}
module_init(hello_init);
module_exit(hello_exit);
MODULE_LICENSE("GPL");
[loongson@linux hello]$ cat Makefile
obj-m:=hello.o
ccflags-y += -g -Og
all:
make -C /lib/modules/$(shell uname -r)/build/ M=$(PWD) modules
clean:
make -C /lib/modules/$(shell uname -r)/build/ M=$(PWD) clean
(2) Test environment
system: LoongArch CLFS 5.5
https://github.com/sunhaiyong1978/CLFS-for-LoongArch/releases/tag/5.0
It needs to update grub to avoid booting error "invalid magic number".
kernel: 6.3-rc1 with loongson3_defconfig + CONFIG_DYNAMIC_FTRACE=y
(3) Test result
Without this patch:
[root@linux hello]# insmod hello.ko
[root@linux hello]# dmesg
...
Hello, world
This is a test
...
Call Trace:
[<9000000000223728>] show_stack+0x68/0x18c
[<90000000013374cc>] dump_stack_lvl+0x60/0x88
[<ffff800002050028>] L0\x01+0x20/0x2c [hello]
[<ffff800002058028>] L0\x01+0x20/0x30 [hello]
[<900000000022097c>] do_one_initcall+0x88/0x288
[<90000000002df890>] do_init_module+0x54/0x200
[<90000000002e1e18>] __do_sys_finit_module+0xc4/0x114
[<90000000013382e8>] do_syscall+0x7c/0x94
[<9000000000221e3c>] handle_syscall+0xbc/0x158
With this patch:
[root@linux hello]# insmod hello.ko
[root@linux hello]# dmesg
...
Hello, world
This is a test
...
Call Trace:
[<9000000000223728>] show_stack+0x68/0x18c
[<90000000013374cc>] dump_stack_lvl+0x60/0x88
[<ffff800002050028>] test_func+0x28/0x34 [hello]
[<ffff800002058028>] hello_init+0x28/0x38 [hello]
[<900000000022097c>] do_one_initcall+0x88/0x288
[<90000000002df890>] do_init_module+0x54/0x200
[<90000000002e1e18>] __do_sys_finit_module+0xc4/0x114
[<90000000013382e8>] do_syscall+0x7c/0x94
[<9000000000221e3c>] handle_syscall+0xbc/0x158
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Tested-by: Youling Tang <tangyouling@loongson.cn> # for LoongArch
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
In order to avoid duplicated code, move is_arm_mapping_symbol() to
include/linux/module_symbol.h, then remove is_arm_mapping_symbol()
in the other places.
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
