The GMAC of Loongson chips cannot insert the correct 1.5-2ns delay. So
we need the PHY to insert internal delays for both transmit and receive
data lines from/to the PHY device. Fix this by changing the "phy-mode"
from "rgmii" to "rgmii-id" in dts.
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
By now, more Loongson-2K2000 related drivers are supported, such as
clock controller and thermal controller. So we add these device nodes
to the Loongson-2K2000 dts file.
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
By now, more Loongson-2K0500 related drivers are supported, such as
clock controller, thermal controller, and dma controller. So we add
these device nodes to the Loongson-2K0500 dts file.
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Things like clock controllers or architectural interrupt controllers,
no one would disable them because otherwise they would have no usable
system. So we just "enabled" them by default.
Suggested-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Current dts file for Loongson-2K2000's GMAC/GNET is incomplete, both irq
and phy descriptions are missing. Add them to make GMAC/GNET work.
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Current dts file for Loongson-2K2000 misses the interrupt-controller &
interrupt-cells descriptions in the msi-controller node, and misses the
msi-parent link in the pci root node. Add them to support PCI-MSI.
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Some Loongson-2K2000 platforms have ISA/LPC devices such as Super-IO,
define an ISA node in the dts file to avoid access error. Also adjust
the PCI io resource range to avoid confliction.
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Some Loongson-2K1000 platforms have ISA/LPC devices such as Super-IO,
define an ISA node in the dts file to avoid access error.
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
The DTS code coding style expects exactly one space before '{'
character.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
During the upstream progress of those DT-based drivers, DT properties
are changed a lot so very different from those in existing bootloaders.
It is inevitably that some existing systems do not provide a standard,
canonical device tree to the kernel at boot time. So let's provide a
device tree table in the kernel, keyed by the dts filename, containing
the relevant DTBs.
We can use the built-in dts files as references. Each SoC has only one
built-in dts file which describes all possible device information of
that SoC, so the dts files are good examples during development.
And as a reference, our built-in dts file only enables the most basic
bootable combinations (so it is generic enough), acts as an alternative
in case the dts in the bootloader is unexpected.
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
This patch adds efistub booting support, which is the standard UEFI boot
protocol for LoongArch to use.
We use generic efistub, which means we can pass boot information (i.e.,
system table, memory map, kernel command line, initrd) via a light FDT
and drop a lot of non-standard code.
We use a flat mapping to map the efi runtime in the kernel's address
space. In efi, VA = PA; in kernel, VA = PA + PAGE_OFFSET. As a result,
flat mapping is not identity mapping, SetVirtualAddressMap() is still
needed for the efi runtime.
Tested-by: Xi Ruoyao <xry111@xry111.site>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
[ardb: change fpic to fpie as suggested by Xi Ruoyao]
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
