linux-next/arch/arm/plat-orion/time.c
afzal mohammed 37b146e3f2 ARM: orion: replace setup_irq() by request_irq()
request_irq() is preferred over setup_irq(). Invocations of setup_irq()
occur after memory allocators are ready.

Per tglx[1], setup_irq() existed in olden days when allocators were not
ready by the time early interrupts were initialized.

Hence replace setup_irq() by request_irq().

[1] https://lkml.kernel.org/r/alpine.DEB.2.20.1710191609480.1971@nanos

Signed-off-by: afzal mohammed <afzal.mohd.ma@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2020-03-13 21:37:15 +01:00

239 lines
5.5 KiB
C

/*
* arch/arm/plat-orion/time.c
*
* Marvell Orion SoC timer handling.
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*
* Timer 0 is used as free-running clocksource, while timer 1 is
* used as clock_event_device.
*/
#include <linux/kernel.h>
#include <linux/timer.h>
#include <linux/clockchips.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/sched_clock.h>
#include <plat/time.h>
#include <asm/delay.h>
/*
* MBus bridge block registers.
*/
#define BRIDGE_CAUSE_OFF 0x0110
#define BRIDGE_MASK_OFF 0x0114
#define BRIDGE_INT_TIMER0 0x0002
#define BRIDGE_INT_TIMER1 0x0004
/*
* Timer block registers.
*/
#define TIMER_CTRL_OFF 0x0000
#define TIMER0_EN 0x0001
#define TIMER0_RELOAD_EN 0x0002
#define TIMER1_EN 0x0004
#define TIMER1_RELOAD_EN 0x0008
#define TIMER0_RELOAD_OFF 0x0010
#define TIMER0_VAL_OFF 0x0014
#define TIMER1_RELOAD_OFF 0x0018
#define TIMER1_VAL_OFF 0x001c
/*
* SoC-specific data.
*/
static void __iomem *bridge_base;
static u32 bridge_timer1_clr_mask;
static void __iomem *timer_base;
/*
* Number of timer ticks per jiffy.
*/
static u32 ticks_per_jiffy;
/*
* Orion's sched_clock implementation. It has a resolution of
* at least 7.5ns (133MHz TCLK).
*/
static u64 notrace orion_read_sched_clock(void)
{
return ~readl(timer_base + TIMER0_VAL_OFF);
}
/*
* Clockevent handling.
*/
static int
orion_clkevt_next_event(unsigned long delta, struct clock_event_device *dev)
{
unsigned long flags;
u32 u;
if (delta == 0)
return -ETIME;
local_irq_save(flags);
/*
* Clear and enable clockevent timer interrupt.
*/
writel(bridge_timer1_clr_mask, bridge_base + BRIDGE_CAUSE_OFF);
u = readl(bridge_base + BRIDGE_MASK_OFF);
u |= BRIDGE_INT_TIMER1;
writel(u, bridge_base + BRIDGE_MASK_OFF);
/*
* Setup new clockevent timer value.
*/
writel(delta, timer_base + TIMER1_VAL_OFF);
/*
* Enable the timer.
*/
u = readl(timer_base + TIMER_CTRL_OFF);
u = (u & ~TIMER1_RELOAD_EN) | TIMER1_EN;
writel(u, timer_base + TIMER_CTRL_OFF);
local_irq_restore(flags);
return 0;
}
static int orion_clkevt_shutdown(struct clock_event_device *evt)
{
unsigned long flags;
u32 u;
local_irq_save(flags);
/* Disable timer */
u = readl(timer_base + TIMER_CTRL_OFF);
writel(u & ~TIMER1_EN, timer_base + TIMER_CTRL_OFF);
/* Disable timer interrupt */
u = readl(bridge_base + BRIDGE_MASK_OFF);
writel(u & ~BRIDGE_INT_TIMER1, bridge_base + BRIDGE_MASK_OFF);
/* ACK pending timer interrupt */
writel(bridge_timer1_clr_mask, bridge_base + BRIDGE_CAUSE_OFF);
local_irq_restore(flags);
return 0;
}
static int orion_clkevt_set_periodic(struct clock_event_device *evt)
{
unsigned long flags;
u32 u;
local_irq_save(flags);
/* Setup timer to fire at 1/HZ intervals */
writel(ticks_per_jiffy - 1, timer_base + TIMER1_RELOAD_OFF);
writel(ticks_per_jiffy - 1, timer_base + TIMER1_VAL_OFF);
/* Enable timer interrupt */
u = readl(bridge_base + BRIDGE_MASK_OFF);
writel(u | BRIDGE_INT_TIMER1, bridge_base + BRIDGE_MASK_OFF);
/* Enable timer */
u = readl(timer_base + TIMER_CTRL_OFF);
writel(u | TIMER1_EN | TIMER1_RELOAD_EN, timer_base + TIMER_CTRL_OFF);
local_irq_restore(flags);
return 0;
}
static struct clock_event_device orion_clkevt = {
.name = "orion_tick",
.features = CLOCK_EVT_FEAT_ONESHOT |
CLOCK_EVT_FEAT_PERIODIC,
.rating = 300,
.set_next_event = orion_clkevt_next_event,
.set_state_shutdown = orion_clkevt_shutdown,
.set_state_periodic = orion_clkevt_set_periodic,
.set_state_oneshot = orion_clkevt_shutdown,
.tick_resume = orion_clkevt_shutdown,
};
static irqreturn_t orion_timer_interrupt(int irq, void *dev_id)
{
/*
* ACK timer interrupt and call event handler.
*/
writel(bridge_timer1_clr_mask, bridge_base + BRIDGE_CAUSE_OFF);
orion_clkevt.event_handler(&orion_clkevt);
return IRQ_HANDLED;
}
void __init
orion_time_set_base(void __iomem *_timer_base)
{
timer_base = _timer_base;
}
static unsigned long orion_delay_timer_read(void)
{
return ~readl(timer_base + TIMER0_VAL_OFF);
}
static struct delay_timer orion_delay_timer = {
.read_current_timer = orion_delay_timer_read,
};
void __init
orion_time_init(void __iomem *_bridge_base, u32 _bridge_timer1_clr_mask,
unsigned int irq, unsigned int tclk)
{
u32 u;
/*
* Set SoC-specific data.
*/
bridge_base = _bridge_base;
bridge_timer1_clr_mask = _bridge_timer1_clr_mask;
ticks_per_jiffy = (tclk + HZ/2) / HZ;
orion_delay_timer.freq = tclk;
register_current_timer_delay(&orion_delay_timer);
/*
* Set scale and timer for sched_clock.
*/
sched_clock_register(orion_read_sched_clock, 32, tclk);
/*
* Setup free-running clocksource timer (interrupts
* disabled).
*/
writel(0xffffffff, timer_base + TIMER0_VAL_OFF);
writel(0xffffffff, timer_base + TIMER0_RELOAD_OFF);
u = readl(bridge_base + BRIDGE_MASK_OFF);
writel(u & ~BRIDGE_INT_TIMER0, bridge_base + BRIDGE_MASK_OFF);
u = readl(timer_base + TIMER_CTRL_OFF);
writel(u | TIMER0_EN | TIMER0_RELOAD_EN, timer_base + TIMER_CTRL_OFF);
clocksource_mmio_init(timer_base + TIMER0_VAL_OFF, "orion_clocksource",
tclk, 300, 32, clocksource_mmio_readl_down);
/*
* Setup clockevent timer (interrupt-driven).
*/
if (request_irq(irq, orion_timer_interrupt, IRQF_TIMER, "orion_tick",
NULL))
pr_err("Failed to request irq %u (orion_tick)\n", irq);
orion_clkevt.cpumask = cpumask_of(0);
clockevents_config_and_register(&orion_clkevt, tclk, 1, 0xfffffffe);
}