mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git
synced 2024-12-29 17:22:07 +00:00
46b6256a68
Parse BFPT in order to retrieve the byte order in 8D-8D-8D mode. This info flag will be used as a basis to determine whether there is byte swapping of data for SPI NOR flash in octal DTR mode. The controller driver will check whether byte swapping is supported to determine whether the corresponding operation are supported, thus avoiding the generation of unexpected data order. Merge Tudor's patch and add modifications for suiting newer version of Linux kernel. Reviewed-by: Michael Walle <mwalle@kernel.org> Signed-off-by: JaimeLiao <jaimeliao@mxic.com.tw> Signed-off-by: AlvinZhou <alvinzhou@mxic.com.tw> Link: https://lore.kernel.org/r/20240926141956.2386374-5-alvinzhou.tw@gmail.com Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
145 lines
5.6 KiB
C
145 lines
5.6 KiB
C
/* SPDX-License-Identifier: GPL-2.0 */
|
|
/*
|
|
* Copyright (C) 2005, Intec Automation Inc.
|
|
* Copyright (C) 2014, Freescale Semiconductor, Inc.
|
|
*/
|
|
|
|
#ifndef __LINUX_MTD_SFDP_H
|
|
#define __LINUX_MTD_SFDP_H
|
|
|
|
/* SFDP revisions */
|
|
#define SFDP_JESD216_MAJOR 1
|
|
#define SFDP_JESD216_MINOR 0
|
|
#define SFDP_JESD216A_MINOR 5
|
|
#define SFDP_JESD216B_MINOR 6
|
|
|
|
/* SFDP DWORDS are indexed from 1 but C arrays are indexed from 0. */
|
|
#define SFDP_DWORD(i) ((i) - 1)
|
|
#define SFDP_MASK_CHECK(dword, mask) (((dword) & (mask)) == (mask))
|
|
|
|
/* Basic Flash Parameter Table */
|
|
|
|
/* JESD216 rev D defines a Basic Flash Parameter Table of 20 DWORDs. */
|
|
#define BFPT_DWORD_MAX 20
|
|
|
|
struct sfdp_bfpt {
|
|
u32 dwords[BFPT_DWORD_MAX];
|
|
};
|
|
|
|
/* The first version of JESD216 defined only 9 DWORDs. */
|
|
#define BFPT_DWORD_MAX_JESD216 9
|
|
#define BFPT_DWORD_MAX_JESD216B 16
|
|
|
|
/* 1st DWORD. */
|
|
#define BFPT_DWORD1_FAST_READ_1_1_2 BIT(16)
|
|
#define BFPT_DWORD1_ADDRESS_BYTES_MASK GENMASK(18, 17)
|
|
#define BFPT_DWORD1_ADDRESS_BYTES_3_ONLY (0x0UL << 17)
|
|
#define BFPT_DWORD1_ADDRESS_BYTES_3_OR_4 (0x1UL << 17)
|
|
#define BFPT_DWORD1_ADDRESS_BYTES_4_ONLY (0x2UL << 17)
|
|
#define BFPT_DWORD1_DTR BIT(19)
|
|
#define BFPT_DWORD1_FAST_READ_1_2_2 BIT(20)
|
|
#define BFPT_DWORD1_FAST_READ_1_4_4 BIT(21)
|
|
#define BFPT_DWORD1_FAST_READ_1_1_4 BIT(22)
|
|
|
|
/* 5th DWORD. */
|
|
#define BFPT_DWORD5_FAST_READ_2_2_2 BIT(0)
|
|
#define BFPT_DWORD5_FAST_READ_4_4_4 BIT(4)
|
|
|
|
/* 11th DWORD. */
|
|
#define BFPT_DWORD11_PAGE_SIZE_SHIFT 4
|
|
#define BFPT_DWORD11_PAGE_SIZE_MASK GENMASK(7, 4)
|
|
|
|
/* 15th DWORD. */
|
|
|
|
/*
|
|
* (from JESD216 rev B)
|
|
* Quad Enable Requirements (QER):
|
|
* - 000b: Device does not have a QE bit. Device detects 1-1-4 and 1-4-4
|
|
* reads based on instruction. DQ3/HOLD# functions are hold during
|
|
* instruction phase.
|
|
* - 001b: QE is bit 1 of status register 2. It is set via Write Status with
|
|
* two data bytes where bit 1 of the second byte is one.
|
|
* [...]
|
|
* Writing only one byte to the status register has the side-effect of
|
|
* clearing status register 2, including the QE bit. The 100b code is
|
|
* used if writing one byte to the status register does not modify
|
|
* status register 2.
|
|
* - 010b: QE is bit 6 of status register 1. It is set via Write Status with
|
|
* one data byte where bit 6 is one.
|
|
* [...]
|
|
* - 011b: QE is bit 7 of status register 2. It is set via Write status
|
|
* register 2 instruction 3Eh with one data byte where bit 7 is one.
|
|
* [...]
|
|
* The status register 2 is read using instruction 3Fh.
|
|
* - 100b: QE is bit 1 of status register 2. It is set via Write Status with
|
|
* two data bytes where bit 1 of the second byte is one.
|
|
* [...]
|
|
* In contrast to the 001b code, writing one byte to the status
|
|
* register does not modify status register 2.
|
|
* - 101b: QE is bit 1 of status register 2. Status register 1 is read using
|
|
* Read Status instruction 05h. Status register2 is read using
|
|
* instruction 35h. QE is set via Write Status instruction 01h with
|
|
* two data bytes where bit 1 of the second byte is one.
|
|
* [...]
|
|
*/
|
|
#define BFPT_DWORD15_QER_MASK GENMASK(22, 20)
|
|
#define BFPT_DWORD15_QER_NONE (0x0UL << 20) /* Micron */
|
|
#define BFPT_DWORD15_QER_SR2_BIT1_BUGGY (0x1UL << 20)
|
|
#define BFPT_DWORD15_QER_SR1_BIT6 (0x2UL << 20) /* Macronix */
|
|
#define BFPT_DWORD15_QER_SR2_BIT7 (0x3UL << 20)
|
|
#define BFPT_DWORD15_QER_SR2_BIT1_NO_RD (0x4UL << 20)
|
|
#define BFPT_DWORD15_QER_SR2_BIT1 (0x5UL << 20) /* Spansion */
|
|
|
|
#define BFPT_DWORD16_EN4B_MASK GENMASK(31, 24)
|
|
#define BFPT_DWORD16_EN4B_ALWAYS_4B BIT(30)
|
|
#define BFPT_DWORD16_EN4B_4B_OPCODES BIT(29)
|
|
#define BFPT_DWORD16_EN4B_16BIT_NV_CR BIT(28)
|
|
#define BFPT_DWORD16_EN4B_BRWR BIT(27)
|
|
#define BFPT_DWORD16_EN4B_WREAR BIT(26)
|
|
#define BFPT_DWORD16_EN4B_WREN_EN4B BIT(25)
|
|
#define BFPT_DWORD16_EN4B_EN4B BIT(24)
|
|
#define BFPT_DWORD16_EX4B_MASK GENMASK(18, 14)
|
|
#define BFPT_DWORD16_EX4B_16BIT_NV_CR BIT(18)
|
|
#define BFPT_DWORD16_EX4B_BRWR BIT(17)
|
|
#define BFPT_DWORD16_EX4B_WREAR BIT(16)
|
|
#define BFPT_DWORD16_EX4B_WREN_EX4B BIT(15)
|
|
#define BFPT_DWORD16_EX4B_EX4B BIT(14)
|
|
#define BFPT_DWORD16_4B_ADDR_MODE_MASK \
|
|
(BFPT_DWORD16_EN4B_MASK | BFPT_DWORD16_EX4B_MASK)
|
|
#define BFPT_DWORD16_4B_ADDR_MODE_16BIT_NV_CR \
|
|
(BFPT_DWORD16_EN4B_16BIT_NV_CR | BFPT_DWORD16_EX4B_16BIT_NV_CR)
|
|
#define BFPT_DWORD16_4B_ADDR_MODE_BRWR \
|
|
(BFPT_DWORD16_EN4B_BRWR | BFPT_DWORD16_EX4B_BRWR)
|
|
#define BFPT_DWORD16_4B_ADDR_MODE_WREAR \
|
|
(BFPT_DWORD16_EN4B_WREAR | BFPT_DWORD16_EX4B_WREAR)
|
|
#define BFPT_DWORD16_4B_ADDR_MODE_WREN_EN4B_EX4B \
|
|
(BFPT_DWORD16_EN4B_WREN_EN4B | BFPT_DWORD16_EX4B_WREN_EX4B)
|
|
#define BFPT_DWORD16_4B_ADDR_MODE_EN4B_EX4B \
|
|
(BFPT_DWORD16_EN4B_EN4B | BFPT_DWORD16_EX4B_EX4B)
|
|
#define BFPT_DWORD16_SWRST_EN_RST BIT(12)
|
|
|
|
#define BFPT_DWORD17_RD_1_1_8_CMD GENMASK(31, 24)
|
|
#define BFPT_DWORD17_RD_1_1_8_MODE_CLOCKS GENMASK(23, 21)
|
|
#define BFPT_DWORD17_RD_1_1_8_WAIT_STATES GENMASK(20, 16)
|
|
#define BFPT_DWORD17_RD_1_8_8_CMD GENMASK(15, 8)
|
|
#define BFPT_DWORD17_RD_1_8_8_MODE_CLOCKS GENMASK(7, 5)
|
|
#define BFPT_DWORD17_RD_1_8_8_WAIT_STATES GENMASK(4, 0)
|
|
|
|
#define BFPT_DWORD18_CMD_EXT_MASK GENMASK(30, 29)
|
|
#define BFPT_DWORD18_CMD_EXT_REP (0x0UL << 29) /* Repeat */
|
|
#define BFPT_DWORD18_CMD_EXT_INV (0x1UL << 29) /* Invert */
|
|
#define BFPT_DWORD18_CMD_EXT_RES (0x2UL << 29) /* Reserved */
|
|
#define BFPT_DWORD18_CMD_EXT_16B (0x3UL << 29) /* 16-bit opcode */
|
|
#define BFPT_DWORD18_BYTE_ORDER_SWAPPED BIT(31) /* Byte order swapped in 8D-8D-8D mode */
|
|
|
|
struct sfdp_parameter_header {
|
|
u8 id_lsb;
|
|
u8 minor;
|
|
u8 major;
|
|
u8 length; /* in double words */
|
|
u8 parameter_table_pointer[3]; /* byte address */
|
|
u8 id_msb;
|
|
};
|
|
|
|
#endif /* __LINUX_MTD_SFDP_H */
|