linux-next/drivers/phy/phy-lgm-usb.c
Uwe Kleine-König 54234e3a69 phy: Switch back to struct platform_driver::remove()
After commit 0edb555a65 ("platform: Make platform_driver::remove()
return void") .remove() is (again) the right callback to implement for
platform drivers.

Convert all platform drivers below drivers/phy/ to use .remove(), with
the eventual goal to drop struct platform_driver::remove_new(). As
.remove() and .remove_new() have the same prototypes, conversion is done
by just changing the structure member name in the driver initializer.

While touching these files, make indention of the struct initializer
consistent in several files.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://lore.kernel.org/r/20241009065307.504930-2-u.kleine-koenig@baylibre.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2024-10-17 20:33:03 +05:30

283 lines
6.6 KiB
C

// SPDX-License-Identifier: GPL-2.0
/*
* Intel LGM USB PHY driver
*
* Copyright (C) 2020 Intel Corporation.
*/
#include <linux/bitfield.h>
#include <linux/delay.h>
#include <linux/iopoll.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/platform_device.h>
#include <linux/regulator/consumer.h>
#include <linux/reset.h>
#include <linux/usb/phy.h>
#include <linux/workqueue.h>
#define CTRL1_OFFSET 0x14
#define SRAM_EXT_LD_DONE BIT(25)
#define SRAM_INIT_DONE BIT(26)
#define TCPC_OFFSET 0x1014
#define TCPC_MUX_CTL GENMASK(1, 0)
#define MUX_NC 0
#define MUX_USB 1
#define MUX_DP 2
#define MUX_USBDP 3
#define TCPC_FLIPPED BIT(2)
#define TCPC_LOW_POWER_EN BIT(3)
#define TCPC_VALID BIT(4)
#define TCPC_CONN \
(TCPC_VALID | FIELD_PREP(TCPC_MUX_CTL, MUX_USB))
#define TCPC_DISCONN \
(TCPC_VALID | FIELD_PREP(TCPC_MUX_CTL, MUX_NC) | TCPC_LOW_POWER_EN)
static const char *const PHY_RESETS[] = { "phy31", "phy", };
static const char *const CTL_RESETS[] = { "apb", "ctrl", };
struct tca_apb {
struct reset_control *resets[ARRAY_SIZE(PHY_RESETS)];
struct regulator *vbus;
struct work_struct wk;
struct usb_phy phy;
bool regulator_enabled;
bool phy_initialized;
bool connected;
};
static int get_flipped(struct tca_apb *ta, bool *flipped)
{
union extcon_property_value property;
int ret;
ret = extcon_get_property(ta->phy.edev, EXTCON_USB_HOST,
EXTCON_PROP_USB_TYPEC_POLARITY, &property);
if (ret) {
dev_err(ta->phy.dev, "no polarity property from extcon\n");
return ret;
}
*flipped = property.intval;
return 0;
}
static int phy_init(struct usb_phy *phy)
{
struct tca_apb *ta = container_of(phy, struct tca_apb, phy);
void __iomem *ctrl1 = phy->io_priv + CTRL1_OFFSET;
int val, ret, i;
if (ta->phy_initialized)
return 0;
for (i = 0; i < ARRAY_SIZE(PHY_RESETS); i++)
reset_control_deassert(ta->resets[i]);
ret = readl_poll_timeout(ctrl1, val, val & SRAM_INIT_DONE, 10, 10 * 1000);
if (ret) {
dev_err(ta->phy.dev, "SRAM init failed, 0x%x\n", val);
return ret;
}
writel(readl(ctrl1) | SRAM_EXT_LD_DONE, ctrl1);
ta->phy_initialized = true;
if (!ta->phy.edev) {
writel(TCPC_CONN, ta->phy.io_priv + TCPC_OFFSET);
return phy->set_vbus(phy, true);
}
schedule_work(&ta->wk);
return ret;
}
static void phy_shutdown(struct usb_phy *phy)
{
struct tca_apb *ta = container_of(phy, struct tca_apb, phy);
int i;
if (!ta->phy_initialized)
return;
ta->phy_initialized = false;
flush_work(&ta->wk);
ta->phy.set_vbus(&ta->phy, false);
ta->connected = false;
writel(TCPC_DISCONN, ta->phy.io_priv + TCPC_OFFSET);
for (i = 0; i < ARRAY_SIZE(PHY_RESETS); i++)
reset_control_assert(ta->resets[i]);
}
static int phy_set_vbus(struct usb_phy *phy, int on)
{
struct tca_apb *ta = container_of(phy, struct tca_apb, phy);
int ret;
if (!!on == ta->regulator_enabled)
return 0;
if (on)
ret = regulator_enable(ta->vbus);
else
ret = regulator_disable(ta->vbus);
if (!ret)
ta->regulator_enabled = on;
dev_dbg(ta->phy.dev, "set vbus: %d\n", on);
return ret;
}
static void tca_work(struct work_struct *work)
{
struct tca_apb *ta = container_of(work, struct tca_apb, wk);
bool connected;
bool flipped = false;
u32 val;
int ret;
ret = get_flipped(ta, &flipped);
if (ret)
return;
connected = extcon_get_state(ta->phy.edev, EXTCON_USB_HOST);
if (connected == ta->connected)
return;
ta->connected = connected;
if (connected) {
val = TCPC_CONN;
if (flipped)
val |= TCPC_FLIPPED;
dev_dbg(ta->phy.dev, "connected%s\n", flipped ? " flipped" : "");
} else {
val = TCPC_DISCONN;
dev_dbg(ta->phy.dev, "disconnected\n");
}
writel(val, ta->phy.io_priv + TCPC_OFFSET);
ret = ta->phy.set_vbus(&ta->phy, connected);
if (ret)
dev_err(ta->phy.dev, "failed to set VBUS\n");
}
static int id_notifier(struct notifier_block *nb, unsigned long event, void *ptr)
{
struct tca_apb *ta = container_of(nb, struct tca_apb, phy.id_nb);
if (ta->phy_initialized)
schedule_work(&ta->wk);
return NOTIFY_DONE;
}
static int vbus_notifier(struct notifier_block *nb, unsigned long evnt, void *ptr)
{
return NOTIFY_DONE;
}
static int phy_probe(struct platform_device *pdev)
{
struct reset_control *resets[ARRAY_SIZE(CTL_RESETS)];
struct device *dev = &pdev->dev;
struct usb_phy *phy;
struct tca_apb *ta;
int i;
ta = devm_kzalloc(dev, sizeof(*ta), GFP_KERNEL);
if (!ta)
return -ENOMEM;
platform_set_drvdata(pdev, ta);
INIT_WORK(&ta->wk, tca_work);
phy = &ta->phy;
phy->dev = dev;
phy->label = dev_name(dev);
phy->type = USB_PHY_TYPE_USB3;
phy->init = phy_init;
phy->shutdown = phy_shutdown;
phy->set_vbus = phy_set_vbus;
phy->id_nb.notifier_call = id_notifier;
phy->vbus_nb.notifier_call = vbus_notifier;
phy->io_priv = devm_platform_ioremap_resource(pdev, 0);
if (IS_ERR(phy->io_priv))
return PTR_ERR(phy->io_priv);
ta->vbus = devm_regulator_get(dev, "vbus");
if (IS_ERR(ta->vbus))
return PTR_ERR(ta->vbus);
for (i = 0; i < ARRAY_SIZE(CTL_RESETS); i++) {
resets[i] = devm_reset_control_get_exclusive(dev, CTL_RESETS[i]);
if (IS_ERR(resets[i])) {
dev_err(dev, "%s reset not found\n", CTL_RESETS[i]);
return PTR_ERR(resets[i]);
}
}
for (i = 0; i < ARRAY_SIZE(PHY_RESETS); i++) {
ta->resets[i] = devm_reset_control_get_exclusive(dev, PHY_RESETS[i]);
if (IS_ERR(ta->resets[i])) {
dev_err(dev, "%s reset not found\n", PHY_RESETS[i]);
return PTR_ERR(ta->resets[i]);
}
}
for (i = 0; i < ARRAY_SIZE(CTL_RESETS); i++)
reset_control_assert(resets[i]);
for (i = 0; i < ARRAY_SIZE(PHY_RESETS); i++)
reset_control_assert(ta->resets[i]);
/*
* Out-of-band reset of the controller after PHY reset will cause
* controller malfunctioning, so we should use in-band controller
* reset only and leave the controller de-asserted here.
*/
for (i = 0; i < ARRAY_SIZE(CTL_RESETS); i++)
reset_control_deassert(resets[i]);
/* Need to wait at least 20us after de-assert the controller */
usleep_range(20, 100);
return usb_add_phy_dev(phy);
}
static void phy_remove(struct platform_device *pdev)
{
struct tca_apb *ta = platform_get_drvdata(pdev);
usb_remove_phy(&ta->phy);
}
static const struct of_device_id intel_usb_phy_dt_ids[] = {
{ .compatible = "intel,lgm-usb-phy" },
{ }
};
MODULE_DEVICE_TABLE(of, intel_usb_phy_dt_ids);
static struct platform_driver lgm_phy_driver = {
.driver = {
.name = "lgm-usb-phy",
.of_match_table = intel_usb_phy_dt_ids,
},
.probe = phy_probe,
.remove = phy_remove,
};
module_platform_driver(lgm_phy_driver);
MODULE_DESCRIPTION("Intel LGM USB PHY driver");
MODULE_AUTHOR("Li Yin <yin1.li@intel.com>");
MODULE_AUTHOR("Vadivel Murugan R <vadivel.muruganx.ramuthevar@linux.intel.com>");
MODULE_LICENSE("GPL v2");