mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git
synced 2024-12-29 17:22:07 +00:00
1565fce99b
The usual mixed bag from towards the end of the cycle. Changes since take 1. Fixed the fixes tag and indeed fixed a rebase I messed up on the same fix. New devices support =================== invensense,icm42600 - Support the ICM-42686-P a high range device going up to 32g and 4000 dps New features ============ adi,ad7944 - Add support for chain mode in which many ADCs may be daisy chained and read out via a single long read. adi,ad9467/backend library - Add bus tuning related interfaces. adi,axi-adc - Add control for the AXI clock - seems always enabled early in boot for other reasons, but the driver should not rely on that.. Cleanups and minor or late breaking fixes ========================================= Micrsoft/ACPI mount matrix handling. - Replace several implementations of the Microsoft defined ROTM ACPI method with a single one. multiple drivers - Don't call the result of wait_for_completion() timeout as it's more accurate as time_left. adi,ad7266 - Stop setting the iio_dev->masklength as it's done by the IIO core and should not be set from drivers. adi,ad799x - Some checkpatch type fixes. adi,ad9839 - Ensure compelte MU_CNT1 is written during lock phase. adi,axi-dac - Fix inverted parameter. adi,adis16475 - Drop documentation of non existent sysfs files. avago,apds9306 - Fix an off by one error that overly restricts the range of persistence and adaptive thresholds that the driver accepts. freescale,mxs-lradc - Stop setting the iio_dev->masklength as it's done by the IIO core and should not be set from drivers. invensense,timestamp library - Fix timestamp vs interupt alignment and aovid soms glitches that occured when switching sampling frequency. microchip,mcp3564 - Make use of device_for_each_child_node_scoped() to allow early release without manual fwnode_handle_put(). microchip,mcp9600 - Allow for negative temperatures. microchip,pac1934 - Avoid an out of bounds array index. richtek,rtq6056 - Use iio_device_claim_direct_scoped() to automate lock release and simplify the code. sensortek,stk3110 - Drop a likely incorrect ACPI ID. No known users of this ID and it's not a valid ACPI ID. ti,ads1015 - Make use of device_for_each_child_node_scoped() to allow early release without manual fwnode_handle_put(). -----BEGIN PGP SIGNATURE----- iQJFBAABCAAvFiEEbilms4eEBlKRJoGxVIU0mcT0FogFAmY1LaoRHGppYzIzQGtl cm5lbC5vcmcACgkQVIU0mcT0FojEZA//escavmkn31Q+hQFjaiYsr4YiLFMH2n4a qvRoiEoJgE9b1NDBzECSwN4OKqSZVlUxlX02wp2ntBWFFR5s1bXQKP1AL6QDpbgw Fc2BtJqoUvZ4E983NCmABCCln20Xyp1OqKYYkbwEINkL6yrr0/rOHHD4iXz++dhh QK1dmyUXuHqUbcF+yYJpo0WszWJjKJ0mwJi507v1KeDQPJWx5pygkPFgoJYluxvs iV525ZdOr4uNu30NbS4Rsh/RSJN9a+7VVJaYQBUsfLNf3/Z0xiM9OBTtiKUZt3k0 olL6qo/B+/Akyo9ftch0sbUPrULR9LEPC8ue/XYc8fbVhaJ6Y6/6/5LHK9VV3MCR 4ygJb7e5ohlaiYcSQeraxATgqRX1qXMHwfcQOjS6LJ3VDTo+Uu6eQhkCcMyuoefk /cO12Z9F6CPCfo2aXAdT6ehnGhwwoWAZvTIHiaIairiWNyl39BNe0+Px8M6TUdZt rSICiVZLu4j6lMBlMJymH6Y63t/F7vNmLBUSgnHvuolvq9xAyBiWfuNd1EdhhCt7 ynt/AEb3y9HcDrEEkcSEbbeuvLkKHI5KoZ7zeZgOc5Po8n8o/3Kle6W2Q6pZvWNN /5HlDRvhbpZXcAwXrtX8RjIfq/broFI4JkIhoPx0dNwtJYbJtEDHQgNG1jH/UGOE DCl7Cyu2RpA= =2jqG -----END PGP SIGNATURE----- Merge tag 'iio-for-6.10b-take2' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next Jonathan writes: IIO: 2nd set of new device support, features and cleanup for 6.10 (take 2) The usual mixed bag from towards the end of the cycle. Changes since take 1. Fixed the fixes tag and indeed fixed a rebase I messed up on the same fix. New devices support =================== invensense,icm42600 - Support the ICM-42686-P a high range device going up to 32g and 4000 dps New features ============ adi,ad7944 - Add support for chain mode in which many ADCs may be daisy chained and read out via a single long read. adi,ad9467/backend library - Add bus tuning related interfaces. adi,axi-adc - Add control for the AXI clock - seems always enabled early in boot for other reasons, but the driver should not rely on that.. Cleanups and minor or late breaking fixes ========================================= Micrsoft/ACPI mount matrix handling. - Replace several implementations of the Microsoft defined ROTM ACPI method with a single one. multiple drivers - Don't call the result of wait_for_completion() timeout as it's more accurate as time_left. adi,ad7266 - Stop setting the iio_dev->masklength as it's done by the IIO core and should not be set from drivers. adi,ad799x - Some checkpatch type fixes. adi,ad9839 - Ensure compelte MU_CNT1 is written during lock phase. adi,axi-dac - Fix inverted parameter. adi,adis16475 - Drop documentation of non existent sysfs files. avago,apds9306 - Fix an off by one error that overly restricts the range of persistence and adaptive thresholds that the driver accepts. freescale,mxs-lradc - Stop setting the iio_dev->masklength as it's done by the IIO core and should not be set from drivers. invensense,timestamp library - Fix timestamp vs interupt alignment and aovid soms glitches that occured when switching sampling frequency. microchip,mcp3564 - Make use of device_for_each_child_node_scoped() to allow early release without manual fwnode_handle_put(). microchip,mcp9600 - Allow for negative temperatures. microchip,pac1934 - Avoid an out of bounds array index. richtek,rtq6056 - Use iio_device_claim_direct_scoped() to automate lock release and simplify the code. sensortek,stk3110 - Drop a likely incorrect ACPI ID. No known users of this ID and it's not a valid ACPI ID. ti,ads1015 - Make use of device_for_each_child_node_scoped() to allow early release without manual fwnode_handle_put(). * tag 'iio-for-6.10b-take2' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (41 commits) iio: temperature: mcp9600: Fix temperature reading for negative values iio: adc: PAC1934: fix accessing out of bounds array index iio: invensense: fix timestamp glitches when switching frequency iio: invensense: fix interrupt timestamp alignment iio: dac: ad9739a: write complete MU_CNT1 register during lock iio: pressure: zpa2326: use 'time_left' variable with wait_for_completion_interruptible_timeout() iio: adc: twl6030-gpadc: use 'time_left' variable with wait_for_completion_interruptible_timeout() iio: adc: stm32-dfsdm-adc: use 'time_left' variable with wait_for_completion_interruptible_timeout() iio: adc: stm32-adc: use 'time_left' variable with wait_for_completion_interruptible_timeout() iio: adc: intel_mrfld_adc: use 'time_left' variable with wait_for_completion_interruptible_timeout() iio: adc: fsl-imx25-gcq: use 'time_left' variable with wait_for_completion_interruptible_timeout() iio: adc: exynos_adc: use 'time_left' variable with wait_for_completion_timeout() iio: adc: ad_sigma_delta: use 'time_left' variable with wait_for_completion_timeout() iio: adc: ti-ads1015: use device_for_each_child_node_scoped() iio: adc: ad799x: Prefer to use octal permission iio: adc: ad799x: add blank line to avoid warning messages iio: adc: ad799x: change 'unsigned' to 'unsigned int' declaration iio: adc: mcp3564: Use device_for_each_child_node_scoped() iio: adc: ad9467: support digital interface calibration iio: adc: adi-axi-adc: support digital interface calibration ... |
||
|---|---|---|
| .. | ||
| ABI | ||
| accel | ||
| accounting | ||
| admin-guide | ||
| arch | ||
| block | ||
| bpf | ||
| cdrom | ||
| core-api | ||
| cpu-freq | ||
| crypto | ||
| dev-tools | ||
| devicetree | ||
| doc-guide | ||
| driver-api | ||
| fault-injection | ||
| fb | ||
| features | ||
| filesystems | ||
| firmware_class | ||
| firmware-guide | ||
| fpga | ||
| gpu | ||
| hid | ||
| hwmon | ||
| i2c | ||
| iio | ||
| images | ||
| infiniband | ||
| input | ||
| isdn | ||
| kbuild | ||
| kernel-hacking | ||
| leds | ||
| litmus-tests | ||
| livepatch | ||
| locking | ||
| maintainer | ||
| mhi | ||
| misc-devices | ||
| mm | ||
| netlabel | ||
| netlink | ||
| networking | ||
| nvdimm | ||
| nvme | ||
| PCI | ||
| pcmcia | ||
| peci | ||
| power | ||
| process | ||
| RCU | ||
| rust | ||
| scheduler | ||
| scsi | ||
| security | ||
| sound | ||
| sphinx | ||
| sphinx-static | ||
| spi | ||
| staging | ||
| target | ||
| tee | ||
| timers | ||
| tools | ||
| trace | ||
| translations | ||
| usb | ||
| userspace-api | ||
| virt | ||
| w1 | ||
| watchdog | ||
| wmi | ||
| .gitignore | ||
| atomic_bitops.txt | ||
| atomic_t.txt | ||
| Changes | ||
| CodingStyle | ||
| conf.py | ||
| docutils.conf | ||
| dontdiff | ||
| index.rst | ||
| Kconfig | ||
| Makefile | ||
| memory-barriers.txt | ||
| SubmittingPatches | ||
| subsystem-apis.rst | ||