Jonathan Cameron c56b7d80e3 iio:dummy: Stop enabling timestamp by default. ...

It's bad practice and only done in this fake driver + it breaks my
attempt to take struct buffer opaque. Not worth an access function
as it shouldn't be done anyway.

Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Reviewed-by: Lars-Peter Clausen <lars@metafoo.de>

2017-01-10 19:54:55 +00:00

..

accel

iio:kfifo_buf header include push down.

2017-01-10 19:54:53 +00:00

adc

iio:kfifo_buf header include push down.

2017-01-10 19:54:53 +00:00

amplifiers

spi: Updates for v4.4

2015-11-05 13:15:12 -08:00

buffer

iio:buffer.h include pushdown into buffer implementations

2017-01-10 19:54:53 +00:00

chemical

iio:chemical:atlas-ph-sensor: Fix use of 32 bit int to hold 16 bit big endian value

2016-10-23 22:18:27 +01:00

common

iio:kfifo_buf header include push down.

2017-01-10 19:54:53 +00:00

counter

iio: 104-quad-8: Add IIO support for the ACCES 104-QUAD-8

2016-10-01 17:06:21 +01:00

dac

iio: dac: ad5593r: Add ACPI support

2016-12-30 17:20:14 +00:00

dummy

iio:dummy: Stop enabling timestamp by default.

2017-01-10 19:54:55 +00:00

frequency

iio: frequency: ad9523: use unsigned int rather then bare unsigned

2016-04-17 10:31:03 +01:00

gyro

iio:kfifo_buf header include push down.

2017-01-10 19:54:53 +00:00

health

First round of IIO new device support, features and cleanups for the 4.8 cycle.

2016-06-09 09:15:58 -07:00

humidity

iio: humidity: Support acpi probe for hts211

2016-12-03 08:56:28 +00:00

imu

iio: bmi160: Add of device table for spi

2016-12-30 10:38:19 +00:00

light

iio: light: add driver for Capella CM3605

2016-12-30 17:17:39 +00:00

magnetometer

iio: magnetometer: separate the values of attributes based on their usage type for HID compass sensor

2016-11-24 20:41:30 +00:00

orientation

iio: orientation: hid-sensor-rotation: Add PM function (fix non working driver)

2016-11-05 17:47:47 +00:00

potentiometer

iio: mcp4531: provide range of available raw values

2016-11-13 11:40:26 +00:00

potentiostat

iio: potentiostat: add LMP91000 support

2016-09-27 20:33:03 +01:00

pressure

iio: st_pressure: Export sampling frequency for lps25h and lps331ap

2016-12-30 11:33:56 +00:00

proximity

iio: pulsedlight-lidar-lite-v2: add lidar-lite-v3 property

2016-12-31 15:18:31 +00:00

temperature

iio: maxim_thermocouple: detect invalid storage size in read()

2016-11-13 10:08:32 +01:00

trigger

iio:trigger: Experimental kthread tight loop trigger (thread only)

2016-06-03 13:18:44 +01:00

iio_core_trigger.h

iio: fix semicolon in io_core_trigger.h

2013-08-03 18:40:32 +01:00

iio_core.h

iio:core: timestamping clock selection support

2016-06-30 19:41:38 +01:00

industrialio-buffer.c

iio:buffer: Push implementation of iio_device_attach_buffer into .c file

2017-01-10 19:54:54 +00:00

industrialio-configfs.c

iio:configfs: Introduce iio/configfs.h to provide a location for the configfs_subsystem

2015-12-05 16:25:30 +00:00

industrialio-core.c

iio: Add channel for Gravity

2017-01-05 13:02:25 +00:00

industrialio-event.c

iio: iio_push_event(): Don't crash if the event interface is not registered

2016-09-10 16:40:44 +01:00

industrialio-sw-device.c

iio: Add support for creating IIO devices via configfs

2016-05-04 11:43:54 +01:00

industrialio-sw-trigger.c

iio: core: fix ptr_ret.cocci warnings

2016-01-20 17:09:18 -08:00

industrialio-trigger.c

iio:trigger: Add helper function to verify that a trigger belongs to the same device

2016-09-27 20:32:55 +01:00

industrialio-triggered-event.c

iio: Support triggered events

2015-08-27 20:47:09 +01:00

inkern.c

iio: inkern: add helpers to query available values from channels

2016-11-13 11:40:26 +00:00

Kconfig

iio: 104-quad-8: Add IIO support for the ACCES 104-QUAD-8

2016-10-01 17:06:21 +01:00

Makefile

iio: 104-quad-8: Add IIO support for the ACCES 104-QUAD-8

2016-10-01 17:06:21 +01:00