Marcin Niestroj 7f0d874036 iio: st_pressure: Export sampling frequency for lps25h and lps331ap ...

Both devices are using the same iio_chan_spec to define which settings
are exported with sysfs. Both are properly configured to set/get
sampling frequency for pressure and temperature. They also properly
export available sampling frequencies. The only missing thing is
sampling_frequency sysfs file, which allows to set/get this property
from userspace.

Add sampling frequency to iio channel info mask, so sampling_frequency
file is properly exported using sysfs.

Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

2016-12-30 11:33:56 +00:00

..

abp060mg.c

iio: pressure: Add driver for Honeywell ABP family

2016-10-01 15:14:37 +01:00

bmp280-core.c

IIO: Change msleep to usleep_range for small msecs

2016-12-03 08:58:40 +00:00

bmp280-i2c.c

iio: pressure: bmp280: add power management

2016-07-03 11:32:14 +01:00

bmp280-regmap.c

iio: pressure: bmp280: split off an I2C Kconfig entry

2016-07-03 11:27:14 +01:00

bmp280-spi.c

iio: pressure: bmp280: add power management

2016-07-03 11:32:14 +01:00

bmp280.h

iio: pressure: bmp280: add power management

2016-07-03 11:32:14 +01:00

hid-sensor-press.c

Second set of new driver, functionality and cleanups for IIO in the 4.2 cycle.

2015-05-24 11:45:21 -07:00

hp03.c

iio: pressure: hp03: Add Hope RF HP03 sensor support

2016-04-24 09:46:14 +01:00

hp206c.c

iio: Export I2C module alias information

2016-05-21 20:08:14 +01:00

Kconfig

First round of IIO new device support, features and cleanups for the 4.10 cycle.

2016-10-24 11:34:22 +02:00

Makefile

iio: pressure: Add driver for Honeywell ABP family

2016-10-01 15:14:37 +01:00

mpl115_i2c.c

iio: convert to common i2c_check_functionality() return value

2016-02-27 17:17:43 +00:00

mpl115_spi.c

iio: pressure: mpl115: support MPL115A1

2016-01-30 16:27:12 +00:00

mpl115.c

Merge 4.5-rc3 into staging-next

2016-02-07 17:34:04 -08:00

mpl115.h

iio: pressure: mpl115: support MPL115A1

2016-01-30 16:27:12 +00:00

mpl3115.c

iio: pressure: mpl3115: claim direct mode during raw reads

2016-10-23 19:33:55 +01:00

ms5611_core.c

iio: ms65611_core: Fixes dereferencing regulator pointer

2016-10-23 19:33:50 +01:00

ms5611_i2c.c

iio:pressure:ms5611: oversampling rate support

2016-03-05 14:45:14 +00:00

ms5611_spi.c

iio: pressure: ms5611: use tab for indention

2016-04-16 13:39:28 +01:00

ms5611.h

iio:pressure:ms5611: fix missing regulator_disable

2016-03-20 11:02:40 +00:00

ms5637.c

iio: ms5637 Add Measurement Specialties explicit MS5805 and MS5837 support

2016-06-11 17:27:52 +01:00

st_pressure_buffer.c

iio: st_sensors: switch to a threaded interrupt

2016-05-29 20:21:41 +01:00

st_pressure_core.c

iio: st_pressure: Export sampling frequency for lps25h and lps331ap

2016-12-30 11:33:56 +00:00

st_pressure_i2c.c

iio: st_pressure: Support i2c probe using acpi

2016-12-03 08:56:27 +00:00

st_pressure_spi.c

iio:st_pressure:initial lps22hb sensor support

2016-05-29 15:02:14 +01:00

st_pressure.h

iio: st_pressure: Support i2c probe using acpi

2016-12-03 08:56:27 +00:00

t5403.c

iio: convert to common i2c_check_functionality() return value

2016-02-27 17:17:43 +00:00

zpa2326_i2c.c

iio:pressure: initial zpa2326 barometer support

2016-09-18 19:42:21 +01:00

zpa2326_spi.c

iio:pressure: initial zpa2326 barometer support

2016-09-18 19:42:21 +01:00

zpa2326.c

iio:pressure: zpa2326: remove redundant "DEBUG" ifdef

2016-09-22 18:43:59 +01:00

zpa2326.h

iio:pressure: initial zpa2326 barometer support

2016-09-18 19:42:21 +01:00