linux-next/virt
Linus Torvalds 09d1c6a80f Generic:
- Use memdup_array_user() to harden against overflow.
 
 - Unconditionally advertise KVM_CAP_DEVICE_CTRL for all architectures.
 
 - Clean up Kconfigs that all KVM architectures were selecting
 
 - New functionality around "guest_memfd", a new userspace API that
   creates an anonymous file and returns a file descriptor that refers
   to it.  guest_memfd files are bound to their owning virtual machine,
   cannot be mapped, read, or written by userspace, and cannot be resized.
   guest_memfd files do however support PUNCH_HOLE, which can be used to
   switch a memory area between guest_memfd and regular anonymous memory.
 
 - New ioctl KVM_SET_MEMORY_ATTRIBUTES allowing userspace to specify
   per-page attributes for a given page of guest memory; right now the
   only attribute is whether the guest expects to access memory via
   guest_memfd or not, which in Confidential SVMs backed by SEV-SNP,
   TDX or ARM64 pKVM is checked by firmware or hypervisor that guarantees
   confidentiality (AMD PSP, Intel TDX module, or EL2 in the case of pKVM).
 
 x86:
 
 - Support for "software-protected VMs" that can use the new guest_memfd
   and page attributes infrastructure.  This is mostly useful for testing,
   since there is no pKVM-like infrastructure to provide a meaningfully
   reduced TCB.
 
 - Fix a relatively benign off-by-one error when splitting huge pages during
   CLEAR_DIRTY_LOG.
 
 - Fix a bug where KVM could incorrectly test-and-clear dirty bits in non-leaf
   TDP MMU SPTEs if a racing thread replaces a huge SPTE with a non-huge SPTE.
 
 - Use more generic lockdep assertions in paths that don't actually care
   about whether the caller is a reader or a writer.
 
 - let Xen guests opt out of having PV clock reported as "based on a stable TSC",
   because some of them don't expect the "TSC stable" bit (added to the pvclock
   ABI by KVM, but never set by Xen) to be set.
 
 - Revert a bogus, made-up nested SVM consistency check for TLB_CONTROL.
 
 - Advertise flush-by-ASID support for nSVM unconditionally, as KVM always
   flushes on nested transitions, i.e. always satisfies flush requests.  This
   allows running bleeding edge versions of VMware Workstation on top of KVM.
 
 - Sanity check that the CPU supports flush-by-ASID when enabling SEV support.
 
 - On AMD machines with vNMI, always rely on hardware instead of intercepting
   IRET in some cases to detect unmasking of NMIs
 
 - Support for virtualizing Linear Address Masking (LAM)
 
 - Fix a variety of vPMU bugs where KVM fail to stop/reset counters and other state
   prior to refreshing the vPMU model.
 
 - Fix a double-overflow PMU bug by tracking emulated counter events using a
   dedicated field instead of snapshotting the "previous" counter.  If the
   hardware PMC count triggers overflow that is recognized in the same VM-Exit
   that KVM manually bumps an event count, KVM would pend PMIs for both the
   hardware-triggered overflow and for KVM-triggered overflow.
 
 - Turn off KVM_WERROR by default for all configs so that it's not
   inadvertantly enabled by non-KVM developers, which can be problematic for
   subsystems that require no regressions for W=1 builds.
 
 - Advertise all of the host-supported CPUID bits that enumerate IA32_SPEC_CTRL
   "features".
 
 - Don't force a masterclock update when a vCPU synchronizes to the current TSC
   generation, as updating the masterclock can cause kvmclock's time to "jump"
   unexpectedly, e.g. when userspace hotplugs a pre-created vCPU.
 
 - Use RIP-relative address to read kvm_rebooting in the VM-Enter fault paths,
   partly as a super minor optimization, but mostly to make KVM play nice with
   position independent executable builds.
 
 - Guard KVM-on-HyperV's range-based TLB flush hooks with an #ifdef on
   CONFIG_HYPERV as a minor optimization, and to self-document the code.
 
 - Add CONFIG_KVM_HYPERV to allow disabling KVM support for HyperV "emulation"
   at build time.
 
 ARM64:
 
 - LPA2 support, adding 52bit IPA/PA capability for 4kB and 16kB
   base granule sizes. Branch shared with the arm64 tree.
 
 - Large Fine-Grained Trap rework, bringing some sanity to the
   feature, although there is more to come. This comes with
   a prefix branch shared with the arm64 tree.
 
 - Some additional Nested Virtualization groundwork, mostly
   introducing the NV2 VNCR support and retargetting the NV
   support to that version of the architecture.
 
 - A small set of vgic fixes and associated cleanups.
 
 Loongarch:
 
 - Optimization for memslot hugepage checking
 
 - Cleanup and fix some HW/SW timer issues
 
 - Add LSX/LASX (128bit/256bit SIMD) support
 
 RISC-V:
 
 - KVM_GET_REG_LIST improvement for vector registers
 
 - Generate ISA extension reg_list using macros in get-reg-list selftest
 
 - Support for reporting steal time along with selftest
 
 s390:
 
 - Bugfixes
 
 Selftests:
 
 - Fix an annoying goof where the NX hugepage test prints out garbage
   instead of the magic token needed to run the test.
 
 - Fix build errors when a header is delete/moved due to a missing flag
   in the Makefile.
 
 - Detect if KVM bugged/killed a selftest's VM and print out a helpful
   message instead of complaining that a random ioctl() failed.
 
 - Annotate the guest printf/assert helpers with __printf(), and fix the
   various bugs that were lurking due to lack of said annotation.
 
 There are two non-KVM patches buried in the middle of guest_memfd support:
 
   fs: Rename anon_inode_getfile_secure() and anon_inode_getfd_secure()
   mm: Add AS_UNMOVABLE to mark mapping as completely unmovable
 
 The first is small and mostly suggested-by Christian Brauner; the second
 a bit less so but it was written by an mm person (Vlastimil Babka).
 -----BEGIN PGP SIGNATURE-----
 
 iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmWcMWkUHHBib256aW5p
 QHJlZGhhdC5jb20ACgkQv/vSX3jHroO15gf/WLmmg3SET6Uzw9iEq2xo28831ZA+
 6kpILfIDGKozV5safDmMvcInlc/PTnqOFrsKyyN4kDZ+rIJiafJdg/loE0kPXBML
 wdR+2ix5kYI1FucCDaGTahskBDz8Lb/xTpwGg9BFLYFNmuUeHc74o6GoNvr1uliE
 4kLZL2K6w0cSMPybUD+HqGaET80ZqPwecv+s1JL+Ia0kYZJONJifoHnvOUJ7DpEi
 rgudVdgzt3EPjG0y1z6MjvDBXTCOLDjXajErlYuZD3Ej8N8s59Dh2TxOiDNTLdP4
 a4zjRvDmgyr6H6sz+upvwc7f4M4p+DBvf+TkWF54mbeObHUYliStqURIoA==
 =66Ws
 -----END PGP SIGNATURE-----

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

Pull kvm updates from Paolo Bonzini:
 "Generic:

   - Use memdup_array_user() to harden against overflow.

   - Unconditionally advertise KVM_CAP_DEVICE_CTRL for all
     architectures.

   - Clean up Kconfigs that all KVM architectures were selecting

   - New functionality around "guest_memfd", a new userspace API that
     creates an anonymous file and returns a file descriptor that refers
     to it. guest_memfd files are bound to their owning virtual machine,
     cannot be mapped, read, or written by userspace, and cannot be
     resized. guest_memfd files do however support PUNCH_HOLE, which can
     be used to switch a memory area between guest_memfd and regular
     anonymous memory.

   - New ioctl KVM_SET_MEMORY_ATTRIBUTES allowing userspace to specify
     per-page attributes for a given page of guest memory; right now the
     only attribute is whether the guest expects to access memory via
     guest_memfd or not, which in Confidential SVMs backed by SEV-SNP,
     TDX or ARM64 pKVM is checked by firmware or hypervisor that
     guarantees confidentiality (AMD PSP, Intel TDX module, or EL2 in
     the case of pKVM).

  x86:

   - Support for "software-protected VMs" that can use the new
     guest_memfd and page attributes infrastructure. This is mostly
     useful for testing, since there is no pKVM-like infrastructure to
     provide a meaningfully reduced TCB.

   - Fix a relatively benign off-by-one error when splitting huge pages
     during CLEAR_DIRTY_LOG.

   - Fix a bug where KVM could incorrectly test-and-clear dirty bits in
     non-leaf TDP MMU SPTEs if a racing thread replaces a huge SPTE with
     a non-huge SPTE.

   - Use more generic lockdep assertions in paths that don't actually
     care about whether the caller is a reader or a writer.

   - let Xen guests opt out of having PV clock reported as "based on a
     stable TSC", because some of them don't expect the "TSC stable" bit
     (added to the pvclock ABI by KVM, but never set by Xen) to be set.

   - Revert a bogus, made-up nested SVM consistency check for
     TLB_CONTROL.

   - Advertise flush-by-ASID support for nSVM unconditionally, as KVM
     always flushes on nested transitions, i.e. always satisfies flush
     requests. This allows running bleeding edge versions of VMware
     Workstation on top of KVM.

   - Sanity check that the CPU supports flush-by-ASID when enabling SEV
     support.

   - On AMD machines with vNMI, always rely on hardware instead of
     intercepting IRET in some cases to detect unmasking of NMIs

   - Support for virtualizing Linear Address Masking (LAM)

   - Fix a variety of vPMU bugs where KVM fail to stop/reset counters
     and other state prior to refreshing the vPMU model.

   - Fix a double-overflow PMU bug by tracking emulated counter events
     using a dedicated field instead of snapshotting the "previous"
     counter. If the hardware PMC count triggers overflow that is
     recognized in the same VM-Exit that KVM manually bumps an event
     count, KVM would pend PMIs for both the hardware-triggered overflow
     and for KVM-triggered overflow.

   - Turn off KVM_WERROR by default for all configs so that it's not
     inadvertantly enabled by non-KVM developers, which can be
     problematic for subsystems that require no regressions for W=1
     builds.

   - Advertise all of the host-supported CPUID bits that enumerate
     IA32_SPEC_CTRL "features".

   - Don't force a masterclock update when a vCPU synchronizes to the
     current TSC generation, as updating the masterclock can cause
     kvmclock's time to "jump" unexpectedly, e.g. when userspace
     hotplugs a pre-created vCPU.

   - Use RIP-relative address to read kvm_rebooting in the VM-Enter
     fault paths, partly as a super minor optimization, but mostly to
     make KVM play nice with position independent executable builds.

   - Guard KVM-on-HyperV's range-based TLB flush hooks with an #ifdef on
     CONFIG_HYPERV as a minor optimization, and to self-document the
     code.

   - Add CONFIG_KVM_HYPERV to allow disabling KVM support for HyperV
     "emulation" at build time.

  ARM64:

   - LPA2 support, adding 52bit IPA/PA capability for 4kB and 16kB base
     granule sizes. Branch shared with the arm64 tree.

   - Large Fine-Grained Trap rework, bringing some sanity to the
     feature, although there is more to come. This comes with a prefix
     branch shared with the arm64 tree.

   - Some additional Nested Virtualization groundwork, mostly
     introducing the NV2 VNCR support and retargetting the NV support to
     that version of the architecture.

   - A small set of vgic fixes and associated cleanups.

  Loongarch:

   - Optimization for memslot hugepage checking

   - Cleanup and fix some HW/SW timer issues

   - Add LSX/LASX (128bit/256bit SIMD) support

  RISC-V:

   - KVM_GET_REG_LIST improvement for vector registers

   - Generate ISA extension reg_list using macros in get-reg-list
     selftest

   - Support for reporting steal time along with selftest

  s390:

   - Bugfixes

  Selftests:

   - Fix an annoying goof where the NX hugepage test prints out garbage
     instead of the magic token needed to run the test.

   - Fix build errors when a header is delete/moved due to a missing
     flag in the Makefile.

   - Detect if KVM bugged/killed a selftest's VM and print out a helpful
     message instead of complaining that a random ioctl() failed.

   - Annotate the guest printf/assert helpers with __printf(), and fix
     the various bugs that were lurking due to lack of said annotation"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (185 commits)
  x86/kvm: Do not try to disable kvmclock if it was not enabled
  KVM: x86: add missing "depends on KVM"
  KVM: fix direction of dependency on MMU notifiers
  KVM: introduce CONFIG_KVM_COMMON
  KVM: arm64: Add missing memory barriers when switching to pKVM's hyp pgd
  KVM: arm64: vgic-its: Avoid potential UAF in LPI translation cache
  RISC-V: KVM: selftests: Add get-reg-list test for STA registers
  RISC-V: KVM: selftests: Add steal_time test support
  RISC-V: KVM: selftests: Add guest_sbi_probe_extension
  RISC-V: KVM: selftests: Move sbi_ecall to processor.c
  RISC-V: KVM: Implement SBI STA extension
  RISC-V: KVM: Add support for SBI STA registers
  RISC-V: KVM: Add support for SBI extension registers
  RISC-V: KVM: Add SBI STA info to vcpu_arch
  RISC-V: KVM: Add steal-update vcpu request
  RISC-V: KVM: Add SBI STA extension skeleton
  RISC-V: paravirt: Implement steal-time support
  RISC-V: Add SBI STA extension definitions
  RISC-V: paravirt: Add skeleton for pv-time support
  RISC-V: KVM: Fix indentation in kvm_riscv_vcpu_set_reg_csr()
  ...
2024-01-17 13:03:37 -08:00
..
kvm Generic: 2024-01-17 13:03:37 -08:00
lib Revert "irqbypass: do not start cons/prod when failed connect" 2021-05-15 10:26:55 +01:00
Makefile treewide: Add SPDX license identifier - Makefile/Kconfig 2019-05-21 10:50:46 +02:00