Kernel/linux-next
1
0
Fork 0
mirror of https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git synced 2025-01-16 05:26:07 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
linux-next/arch/arm/mach-omap2/sleep34xx.S
Jean Pihet fe360e1c86 OMAP3: remove hardcoded values from the ASM sleep code 
Using macros from existing include files for registers addresses.

Tested on N900 and Beagleboard with full RET and OFF modes,
using cpuidle and suspend.

Based on original patch from Vishwa.

Signed-off-by: Jean Pihet <j-pihet@ti.com>
Cc: Vishwanath BS <vishwanath.bs@ti.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Tested-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-12-21 14:45:57 -08:00

684 lines
19 KiB
ArmAsm
Raw Blame History

/*
* linux/arch/arm/mach-omap2/sleep.S
*
* (C) Copyright 2007
* Texas Instruments
* Karthik Dasu <karthik-dp@ti.com>
*
* (C) Copyright 2004
* Texas Instruments, <www.ti.com>
* Richard Woodruff <r-woodruff2@ti.com>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <linux/linkage.h>
#include <asm/assembler.h>
#include <plat/sram.h>
#include <mach/io.h>
#include "cm.h"
#include "prm.h"
#include "sdrc.h"
#include "control.h"
/*
* Registers access definitions
*/
#define SDRC_SCRATCHPAD_SEM_OFFS 0xc
#define SDRC_SCRATCHPAD_SEM_V OMAP343X_SCRATCHPAD_REGADDR\
(SDRC_SCRATCHPAD_SEM_OFFS)
#define PM_PREPWSTST_CORE_P OMAP3430_PRM_BASE + CORE_MOD +\
OMAP3430_PM_PREPWSTST
#define PM_PWSTCTRL_MPU_P OMAP3430_PRM_BASE + MPU_MOD + OMAP2_PM_PWSTCTRL
#define CM_IDLEST1_CORE_V OMAP34XX_CM_REGADDR(CORE_MOD, CM_IDLEST1)
#define CM_IDLEST_CKGEN_V OMAP34XX_CM_REGADDR(PLL_MOD, CM_IDLEST)
#define SRAM_BASE_P OMAP3_SRAM_PA
#define CONTROL_STAT OMAP343X_CTRL_BASE + OMAP343X_CONTROL_STATUS
#define CONTROL_MEM_RTA_CTRL (OMAP343X_CTRL_BASE +\
OMAP36XX_CONTROL_MEM_RTA_CTRL)
/* Move this as correct place is available */
#define SCRATCHPAD_MEM_OFFS 0x310
#define SCRATCHPAD_BASE_P (OMAP343X_CTRL_BASE +\
OMAP343X_CONTROL_MEM_WKUP +\
SCRATCHPAD_MEM_OFFS)
#define SDRC_POWER_V OMAP34XX_SDRC_REGADDR(SDRC_POWER)
#define SDRC_SYSCONFIG_P (OMAP343X_SDRC_BASE + SDRC_SYSCONFIG)
#define SDRC_MR_0_P (OMAP343X_SDRC_BASE + SDRC_MR_0)
#define SDRC_EMR2_0_P (OMAP343X_SDRC_BASE + SDRC_EMR2_0)
#define SDRC_MANUAL_0_P (OMAP343X_SDRC_BASE + SDRC_MANUAL_0)
#define SDRC_MR_1_P (OMAP343X_SDRC_BASE + SDRC_MR_1)
#define SDRC_EMR2_1_P (OMAP343X_SDRC_BASE + SDRC_EMR2_1)
#define SDRC_MANUAL_1_P (OMAP343X_SDRC_BASE + SDRC_MANUAL_1)
#define SDRC_DLLA_STATUS_V OMAP34XX_SDRC_REGADDR(SDRC_DLLA_STATUS)
#define SDRC_DLLA_CTRL_V OMAP34XX_SDRC_REGADDR(SDRC_DLLA_CTRL)
/*
* API functions
*/
.text
/* Function call to get the restore pointer for resume from OFF */
ENTRY(get_restore_pointer)
stmfd sp!, {lr} @ save registers on stack
adr r0, restore
ldmfd sp!, {pc} @ restore regs and return
ENTRY(get_restore_pointer_sz)
.word . - get_restore_pointer
.text
/* Function call to get the restore pointer for 3630 resume from OFF */
ENTRY(get_omap3630_restore_pointer)
stmfd sp!, {lr} @ save registers on stack
adr r0, restore_3630
ldmfd sp!, {pc} @ restore regs and return
ENTRY(get_omap3630_restore_pointer_sz)
.word . - get_omap3630_restore_pointer
.text
/*
* L2 cache needs to be toggled for stable OFF mode functionality on 3630.
* This function sets up a fflag that will allow for this toggling to take
* place on 3630. Hopefully some version in the future maynot need this
*/
ENTRY(enable_omap3630_toggle_l2_on_restore)
stmfd sp!, {lr} @ save registers on stack
/* Setup so that we will disable and enable l2 */
mov r1, #0x1
str r1, l2dis_3630
ldmfd sp!, {pc} @ restore regs and return
.text
/* Function call to get the restore pointer for for ES3 to resume from OFF */
ENTRY(get_es3_restore_pointer)
stmfd sp!, {lr} @ save registers on stack
adr r0, restore_es3
ldmfd sp!, {pc} @ restore regs and return
ENTRY(get_es3_restore_pointer_sz)
.word . - get_es3_restore_pointer
ENTRY(es3_sdrc_fix)
ldr r4, sdrc_syscfg @ get config addr
ldr r5, [r4] @ get value
tst r5, #0x100 @ is part access blocked
it eq
biceq r5, r5, #0x100 @ clear bit if set
str r5, [r4] @ write back change
ldr r4, sdrc_mr_0 @ get config addr
ldr r5, [r4] @ get value
str r5, [r4] @ write back change
ldr r4, sdrc_emr2_0 @ get config addr
ldr r5, [r4] @ get value
str r5, [r4] @ write back change
ldr r4, sdrc_manual_0 @ get config addr
mov r5, #0x2 @ autorefresh command
str r5, [r4] @ kick off refreshes
ldr r4, sdrc_mr_1 @ get config addr
ldr r5, [r4] @ get value
str r5, [r4] @ write back change
ldr r4, sdrc_emr2_1 @ get config addr
ldr r5, [r4] @ get value
str r5, [r4] @ write back change
ldr r4, sdrc_manual_1 @ get config addr
mov r5, #0x2 @ autorefresh command
str r5, [r4] @ kick off refreshes
bx lr
sdrc_syscfg:
.word SDRC_SYSCONFIG_P
sdrc_mr_0:
.word SDRC_MR_0_P
sdrc_emr2_0:
.word SDRC_EMR2_0_P
sdrc_manual_0:
.word SDRC_MANUAL_0_P
sdrc_mr_1:
.word SDRC_MR_1_P
sdrc_emr2_1:
.word SDRC_EMR2_1_P
sdrc_manual_1:
.word SDRC_MANUAL_1_P
ENTRY(es3_sdrc_fix_sz)
.word . - es3_sdrc_fix
/* Function to call rom code to save secure ram context */
ENTRY(save_secure_ram_context)
stmfd sp!, {r1-r12, lr} @ save registers on stack
adr r3, api_params @ r3 points to parameters
str r0, [r3,#0x4] @ r0 has sdram address
ldr r12, high_mask
and r3, r3, r12
ldr r12, sram_phy_addr_mask
orr r3, r3, r12
mov r0, #25 @ set service ID for PPA
mov r12, r0 @ copy secure service ID in r12
mov r1, #0 @ set task id for ROM code in r1
mov r2, #4 @ set some flags in r2, r6
mov r6, #0xff
mcr p15, 0, r0, c7, c10, 4 @ data write barrier
mcr p15, 0, r0, c7, c10, 5 @ data memory barrier
.word 0xE1600071 @ call SMI monitor (smi #1)
nop
nop
nop
nop
ldmfd sp!, {r1-r12, pc}
sram_phy_addr_mask:
.word SRAM_BASE_P
high_mask:
.word 0xffff
api_params:
.word 0x4, 0x0, 0x0, 0x1, 0x1
ENTRY(save_secure_ram_context_sz)
.word . - save_secure_ram_context
/*
* Forces OMAP into idle state
*
* omap34xx_suspend() - This bit of code just executes the WFI
* for normal idles.
*
* Note: This code get's copied to internal SRAM at boot. When the OMAP
* wakes up it continues execution at the point it went to sleep.
*/
ENTRY(omap34xx_cpu_suspend)
stmfd sp!, {r0-r12, lr} @ save registers on stack
/* r0 contains restore pointer in sdram */
/* r1 contains information about saving context */
ldr r4, sdrc_power @ read the SDRC_POWER register
ldr r5, [r4] @ read the contents of SDRC_POWER
orr r5, r5, #0x40 @ enable self refresh on idle req
str r5, [r4] @ write back to SDRC_POWER register
cmp r1, #0x0
/* If context save is required, do that and execute wfi */
bne save_context_wfi
/* Data memory barrier and Data sync barrier */
mov r1, #0
mcr p15, 0, r1, c7, c10, 4
mcr p15, 0, r1, c7, c10, 5
wfi @ wait for interrupt
nop
nop
nop
nop
nop
nop
nop
nop
nop
nop
bl wait_sdrc_ok
ldmfd sp!, {r0-r12, pc} @ restore regs and return
restore_es3:
ldr r5, pm_prepwstst_core_p
ldr r4, [r5]
and r4, r4, #0x3
cmp r4, #0x0 @ Check if previous power state of CORE is OFF
bne restore
adr r0, es3_sdrc_fix
ldr r1, sram_base
ldr r2, es3_sdrc_fix_sz
mov r2, r2, ror #2
copy_to_sram:
ldmia r0!, {r3} @ val = *src
stmia r1!, {r3} @ *dst = val
subs r2, r2, #0x1 @ num_words--
bne copy_to_sram
ldr r1, sram_base
blx r1
b restore
restore_3630:
ldr r1, pm_prepwstst_core_p
ldr r2, [r1]
and r2, r2, #0x3
cmp r2, #0x0 @ Check if previous power state of CORE is OFF
bne restore
/* Disable RTA before giving control */
ldr r1, control_mem_rta
mov r2, #OMAP36XX_RTA_DISABLE
str r2, [r1]
/* Fall thru for the remaining logic */
restore:
/* Check what was the reason for mpu reset and store the reason in r9*/
/* 1 - Only L1 and logic lost */
/* 2 - Only L2 lost - In this case, we wont be here */
/* 3 - Both L1 and L2 lost */
ldr r1, pm_pwstctrl_mpu
ldr r2, [r1]
and r2, r2, #0x3
cmp r2, #0x0 @ Check if target power state was OFF or RET
moveq r9, #0x3 @ MPU OFF => L1 and L2 lost
movne r9, #0x1 @ Only L1 and L2 lost => avoid L2 invalidation
bne logic_l1_restore
ldr r0, l2dis_3630
cmp r0, #0x1 @ should we disable L2 on 3630?
bne skipl2dis
mrc p15, 0, r0, c1, c0, 1
bic r0, r0, #2 @ disable L2 cache
mcr p15, 0, r0, c1, c0, 1
skipl2dis:
ldr r0, control_stat
ldr r1, [r0]
and r1, #0x700
cmp r1, #0x300
beq l2_inv_gp
mov r0, #40 @ set service ID for PPA
mov r12, r0 @ copy secure Service ID in r12
mov r1, #0 @ set task id for ROM code in r1
mov r2, #4 @ set some flags in r2, r6
mov r6, #0xff
adr r3, l2_inv_api_params @ r3 points to dummy parameters
mcr p15, 0, r0, c7, c10, 4 @ data write barrier
mcr p15, 0, r0, c7, c10, 5 @ data memory barrier
.word 0xE1600071 @ call SMI monitor (smi #1)
/* Write to Aux control register to set some bits */
mov r0, #42 @ set service ID for PPA
mov r12, r0 @ copy secure Service ID in r12
mov r1, #0 @ set task id for ROM code in r1
mov r2, #4 @ set some flags in r2, r6
mov r6, #0xff
ldr r4, scratchpad_base
ldr r3, [r4, #0xBC] @ r3 points to parameters
mcr p15, 0, r0, c7, c10, 4 @ data write barrier
mcr p15, 0, r0, c7, c10, 5 @ data memory barrier
.word 0xE1600071 @ call SMI monitor (smi #1)
#ifdef CONFIG_OMAP3_L2_AUX_SECURE_SAVE_RESTORE
/* Restore L2 aux control register */
@ set service ID for PPA
mov r0, #CONFIG_OMAP3_L2_AUX_SECURE_SERVICE_SET_ID
mov r12, r0 @ copy service ID in r12
mov r1, #0 @ set task ID for ROM code in r1
mov r2, #4 @ set some flags in r2, r6
mov r6, #0xff
ldr r4, scratchpad_base
ldr r3, [r4, #0xBC]
adds r3, r3, #8 @ r3 points to parameters
mcr p15, 0, r0, c7, c10, 4 @ data write barrier
mcr p15, 0, r0, c7, c10, 5 @ data memory barrier
.word 0xE1600071 @ call SMI monitor (smi #1)
#endif
b logic_l1_restore
l2_inv_api_params:
.word 0x1, 0x00
l2_inv_gp:
/* Execute smi to invalidate L2 cache */
mov r12, #0x1 @ set up to invalide L2
smi: .word 0xE1600070 @ Call SMI monitor (smieq)
/* Write to Aux control register to set some bits */
ldr r4, scratchpad_base
ldr r3, [r4,#0xBC]
ldr r0, [r3,#4]
mov r12, #0x3
.word 0xE1600070 @ Call SMI monitor (smieq)
ldr r4, scratchpad_base
ldr r3, [r4,#0xBC]
ldr r0, [r3,#12]
mov r12, #0x2
.word 0xE1600070 @ Call SMI monitor (smieq)
logic_l1_restore:
ldr r1, l2dis_3630
cmp r1, #0x1 @ Do we need to re-enable L2 on 3630?
bne skipl2reen
mrc p15, 0, r1, c1, c0, 1
orr r1, r1, #2 @ re-enable L2 cache
mcr p15, 0, r1, c1, c0, 1
skipl2reen:
mov r1, #0
/* Invalidate all instruction caches to PoU
* and flush branch target cache */
mcr p15, 0, r1, c7, c5, 0
ldr r4, scratchpad_base
ldr r3, [r4,#0xBC]
adds r3, r3, #16
ldmia r3!, {r4-r6}
mov sp, r4
msr spsr_cxsf, r5
mov lr, r6
ldmia r3!, {r4-r9}
/* Coprocessor access Control Register */
mcr p15, 0, r4, c1, c0, 2
/* TTBR0 */
MCR p15, 0, r5, c2, c0, 0
/* TTBR1 */
MCR p15, 0, r6, c2, c0, 1
/* Translation table base control register */
MCR p15, 0, r7, c2, c0, 2
/*domain access Control Register */
MCR p15, 0, r8, c3, c0, 0
/* data fault status Register */
MCR p15, 0, r9, c5, c0, 0
ldmia r3!,{r4-r8}
/* instruction fault status Register */
MCR p15, 0, r4, c5, c0, 1
/*Data Auxiliary Fault Status Register */
MCR p15, 0, r5, c5, c1, 0
/*Instruction Auxiliary Fault Status Register*/
MCR p15, 0, r6, c5, c1, 1
/*Data Fault Address Register */
MCR p15, 0, r7, c6, c0, 0
/*Instruction Fault Address Register*/
MCR p15, 0, r8, c6, c0, 2
ldmia r3!,{r4-r7}
/* user r/w thread and process ID */
MCR p15, 0, r4, c13, c0, 2
/* user ro thread and process ID */
MCR p15, 0, r5, c13, c0, 3
/*Privileged only thread and process ID */
MCR p15, 0, r6, c13, c0, 4
/* cache size selection */
MCR p15, 2, r7, c0, c0, 0
ldmia r3!,{r4-r8}
/* Data TLB lockdown registers */
MCR p15, 0, r4, c10, c0, 0
/* Instruction TLB lockdown registers */
MCR p15, 0, r5, c10, c0, 1
/* Secure or Nonsecure Vector Base Address */
MCR p15, 0, r6, c12, c0, 0
/* FCSE PID */
MCR p15, 0, r7, c13, c0, 0
/* Context PID */
MCR p15, 0, r8, c13, c0, 1
ldmia r3!,{r4-r5}
/* primary memory remap register */
MCR p15, 0, r4, c10, c2, 0
/*normal memory remap register */
MCR p15, 0, r5, c10, c2, 1
/* Restore cpsr */
ldmia r3!,{r4} /*load CPSR from SDRAM*/
msr cpsr, r4 /*store cpsr */
/* Enabling MMU here */
mrc p15, 0, r7, c2, c0, 2 /* Read TTBRControl */
/* Extract N (0:2) bits and decide whether to use TTBR0 or TTBR1*/
and r7, #0x7
cmp r7, #0x0
beq usettbr0
ttbr_error:
/* More work needs to be done to support N[0:2] value other than 0
* So looping here so that the error can be detected
*/
b ttbr_error
usettbr0:
mrc p15, 0, r2, c2, c0, 0
ldr r5, ttbrbit_mask
and r2, r5
mov r4, pc
ldr r5, table_index_mask
and r4, r5 /* r4 = 31 to 20 bits of pc */
/* Extract the value to be written to table entry */
ldr r1, table_entry
add r1, r1, r4 /* r1 has value to be written to table entry*/
/* Getting the address of table entry to modify */
lsr r4, #18
add r2, r4 /* r2 has the location which needs to be modified */
/* Storing previous entry of location being modified */
ldr r5, scratchpad_base
ldr r4, [r2]
str r4, [r5, #0xC0]
/* Modify the table entry */
str r1, [r2]
/* Storing address of entry being modified
* - will be restored after enabling MMU */
ldr r5, scratchpad_base
str r2, [r5, #0xC4]
mov r0, #0
mcr p15, 0, r0, c7, c5, 4 @ Flush prefetch buffer
mcr p15, 0, r0, c7, c5, 6 @ Invalidate branch predictor array
mcr p15, 0, r0, c8, c5, 0 @ Invalidate instruction TLB
mcr p15, 0, r0, c8, c6, 0 @ Invalidate data TLB
/* Restore control register but dont enable caches here*/
/* Caches will be enabled after restoring MMU table entry */
ldmia r3!, {r4}
/* Store previous value of control register in scratchpad */
str r4, [r5, #0xC8]
ldr r2, cache_pred_disable_mask
and r4, r2
mcr p15, 0, r4, c1, c0, 0
ldmfd sp!, {r0-r12, pc} @ restore regs and return
save_context_wfi:
mov r8, r0 /* Store SDRAM address in r8 */
mrc p15, 0, r5, c1, c0, 1 @ Read Auxiliary Control Register
mov r4, #0x1 @ Number of parameters for restore call
stmia r8!, {r4-r5} @ Push parameters for restore call
mrc p15, 1, r5, c9, c0, 2 @ Read L2 AUX ctrl register
stmia r8!, {r4-r5} @ Push parameters for restore call
/* Check what that target sleep state is:stored in r1*/
/* 1 - Only L1 and logic lost */
/* 2 - Only L2 lost */
/* 3 - Both L1 and L2 lost */
cmp r1, #0x2 /* Only L2 lost */
beq clean_l2
cmp r1, #0x1 /* L2 retained */
/* r9 stores whether to clean L2 or not*/
moveq r9, #0x0 /* Dont Clean L2 */
movne r9, #0x1 /* Clean L2 */
l1_logic_lost:
/* Store sp and spsr to SDRAM */
mov r4, sp
mrs r5, spsr
mov r6, lr
stmia r8!, {r4-r6}
/* Save all ARM registers */
/* Coprocessor access control register */
mrc p15, 0, r6, c1, c0, 2
stmia r8!, {r6}
/* TTBR0, TTBR1 and Translation table base control */
mrc p15, 0, r4, c2, c0, 0
mrc p15, 0, r5, c2, c0, 1
mrc p15, 0, r6, c2, c0, 2
stmia r8!, {r4-r6}
/* Domain access control register, data fault status register,
and instruction fault status register */
mrc p15, 0, r4, c3, c0, 0
mrc p15, 0, r5, c5, c0, 0
mrc p15, 0, r6, c5, c0, 1
stmia r8!, {r4-r6}
/* Data aux fault status register, instruction aux fault status,
datat fault address register and instruction fault address register*/
mrc p15, 0, r4, c5, c1, 0
mrc p15, 0, r5, c5, c1, 1
mrc p15, 0, r6, c6, c0, 0
mrc p15, 0, r7, c6, c0, 2
stmia r8!, {r4-r7}
/* user r/w thread and process ID, user r/o thread and process ID,
priv only thread and process ID, cache size selection */
mrc p15, 0, r4, c13, c0, 2
mrc p15, 0, r5, c13, c0, 3
mrc p15, 0, r6, c13, c0, 4
mrc p15, 2, r7, c0, c0, 0
stmia r8!, {r4-r7}
/* Data TLB lockdown, instruction TLB lockdown registers */
mrc p15, 0, r5, c10, c0, 0
mrc p15, 0, r6, c10, c0, 1
stmia r8!, {r5-r6}
/* Secure or non secure vector base address, FCSE PID, Context PID*/
mrc p15, 0, r4, c12, c0, 0
mrc p15, 0, r5, c13, c0, 0
mrc p15, 0, r6, c13, c0, 1
stmia r8!, {r4-r6}
/* Primary remap, normal remap registers */
mrc p15, 0, r4, c10, c2, 0
mrc p15, 0, r5, c10, c2, 1
stmia r8!,{r4-r5}
/* Store current cpsr*/
mrs r2, cpsr
stmia r8!, {r2}
mrc p15, 0, r4, c1, c0, 0
/* save control register */
stmia r8!, {r4}
clean_caches:
/* Clean Data or unified cache to POU*/
/* How to invalidate only L1 cache???? - #FIX_ME# */
/* mcr p15, 0, r11, c7, c11, 1 */
cmp r9, #1 /* Check whether L2 inval is required or not*/
bne skip_l2_inval
clean_l2:
/*
* Jump out to kernel flush routine
* - reuse that code is better
* - it executes in a cached space so is faster than refetch per-block
* - should be faster and will change with kernel
* - 'might' have to copy address, load and jump to it
* - lr is used since we are running in SRAM currently.
*/
ldr r1, kernel_flush
mov lr, pc
bx r1
skip_l2_inval:
/* Data memory barrier and Data sync barrier */
mov r1, #0
mcr p15, 0, r1, c7, c10, 4
mcr p15, 0, r1, c7, c10, 5
wfi @ wait for interrupt
nop
nop
nop
nop
nop
nop
nop
nop
nop
nop
bl wait_sdrc_ok
/* restore regs and return */
ldmfd sp!, {r0-r12, pc}
/* Make sure SDRC accesses are ok */
wait_sdrc_ok:
/* DPLL3 must be locked before accessing the SDRC. Maybe the HW ensures this. */
ldr r4, cm_idlest_ckgen
wait_dpll3_lock:
ldr r5, [r4]
tst r5, #1
beq wait_dpll3_lock
ldr r4, cm_idlest1_core
wait_sdrc_ready:
ldr r5, [r4]
tst r5, #0x2
bne wait_sdrc_ready
/* allow DLL powerdown upon hw idle req */
ldr r4, sdrc_power
ldr r5, [r4]
bic r5, r5, #0x40
str r5, [r4]
is_dll_in_lock_mode:
/* Is dll in lock mode? */
ldr r4, sdrc_dlla_ctrl
ldr r5, [r4]
tst r5, #0x4
bxne lr
/* wait till dll locks */
wait_dll_lock_timed:
ldr r4, wait_dll_lock_counter
add r4, r4, #1
str r4, wait_dll_lock_counter
ldr r4, sdrc_dlla_status
mov r6, #8 /* Wait 20uS for lock */
wait_dll_lock:
subs r6, r6, #0x1
beq kick_dll
ldr r5, [r4]
and r5, r5, #0x4
cmp r5, #0x4
bne wait_dll_lock
bx lr
/* disable/reenable DLL if not locked */
kick_dll:
ldr r4, sdrc_dlla_ctrl
ldr r5, [r4]
mov r6, r5
bic r6, #(1<<3) /* disable dll */
str r6, [r4]
dsb
orr r6, r6, #(1<<3) /* enable dll */
str r6, [r4]
dsb
ldr r4, kick_counter
add r4, r4, #1
str r4, kick_counter
b wait_dll_lock_timed
cm_idlest1_core:
.word CM_IDLEST1_CORE_V
cm_idlest_ckgen:
.word CM_IDLEST_CKGEN_V
sdrc_dlla_status:
.word SDRC_DLLA_STATUS_V
sdrc_dlla_ctrl:
.word SDRC_DLLA_CTRL_V
pm_prepwstst_core_p:
.word PM_PREPWSTST_CORE_P
pm_pwstctrl_mpu:
.word PM_PWSTCTRL_MPU_P
scratchpad_base:
.word SCRATCHPAD_BASE_P
sram_base:
.word SRAM_BASE_P + 0x8000
sdrc_power:
.word SDRC_POWER_V
ttbrbit_mask:
.word 0xFFFFC000
table_index_mask:
.word 0xFFF00000
table_entry:
.word 0x00000C02
cache_pred_disable_mask:
.word 0xFFFFE7FB
control_stat:
.word CONTROL_STAT
control_mem_rta:
.word CONTROL_MEM_RTA_CTRL
kernel_flush:
.word v7_flush_dcache_all
l2dis_3630:
.word 0
/*
* When exporting to userspace while the counters are in SRAM,
* these 2 words need to be at the end to facilitate retrival!
*/
kick_counter:
.word 0
wait_dll_lock_counter:
.word 0
ENTRY(omap34xx_cpu_suspend_sz)
.word . - omap34xx_cpu_suspend
Reference in New Issue View Git Blame Copy Permalink