.. |
aquantia
|
net: phy: avoid undefined behavior in *_led_polarity_set()
|
2024-12-18 16:50:23 -08:00 |
mediatek
|
net: phy: mediatek: add MT7530 & MT7531's PHY ID macros
|
2024-11-13 13:06:04 +00:00 |
mscc
|
net: phy: use ethtool string helpers
|
2024-11-03 11:07:46 -08:00 |
qcom
|
net: phy: use ethtool string helpers
|
2024-11-03 11:07:46 -08:00 |
adin1100.c
|
net: phy: adin1100: Add interrupt support for link change
|
2024-01-31 16:22:29 -08:00 |
adin.c
|
net: phy: use ethtool string helpers
|
2024-11-03 11:07:46 -08:00 |
air_en8811h.c
|
move asm/unaligned.h to linux/unaligned.h
|
2024-10-02 17:23:23 -04:00 |
amd.c
|
net: phy: amd: Support the Altima AMI101L
|
2023-10-03 11:44:09 +02:00 |
ax88796b_rust.rs
|
rust: net::phy unified read/write API for C22 and C45 registers
|
2024-08-30 10:27:35 +01:00 |
ax88796b.c
|
net: phy: fix regression with AX88772A PHY driver
|
2023-09-19 17:03:44 +02:00 |
bcm7xxx.c
|
net: phy: bcm7xxx: Add missing 16nm EPHY statistics
|
2023-10-18 18:13:13 -07:00 |
bcm63xx.c
|
|
|
bcm87xx.c
|
net: phy: fill in missing MODULE_DESCRIPTION()s
|
2023-11-01 21:50:56 -07:00 |
bcm54140.c
|
net: phy: extend PHY package API to support multiple global address
|
2023-12-17 20:10:07 +00:00 |
bcm84881.c
|
net: phy: bcm84881: implement phy_inband_caps() method
|
2024-12-04 19:19:07 -08:00 |
bcm-cygnus.c
|
|
|
bcm-phy-lib.c
|
net: phy: broadcom: use genphy_c45_an_config_eee_aneg in bcm_config_lre_aneg
|
2024-11-07 20:31:06 -08:00 |
bcm-phy-lib.h
|
net: phy: bcm-phy-lib: Implement BroadR-Reach link modes
|
2024-07-14 20:38:35 -07:00 |
bcm-phy-ptp.c
|
move asm/unaligned.h to linux/unaligned.h
|
2024-10-02 17:23:23 -04:00 |
broadcom.c
|
net: phy: bcm-phy-lib: Implement BroadR-Reach link modes
|
2024-07-14 20:38:35 -07:00 |
cicada.c
|
|
|
cortina.c
|
|
|
davicom.c
|
|
|
dp83tc811.c
|
|
|
dp83td510.c
|
phy: dp83td510: Utilize ALCD for cable length measurement when link is active
|
2024-08-26 09:33:58 -07:00 |
dp83tg720.c
|
net: phy: dp83tg720: Add cable testing support
|
2024-08-16 10:16:26 -07:00 |
dp83640_reg.h
|
|
|
dp83640.c
|
net: Add struct kernel_ethtool_ts_info
|
2024-07-15 08:02:26 -07:00 |
dp83822.c
|
net: phy: dp83822: Add support for GPIO2 clock output
|
2024-12-15 21:12:37 +00:00 |
dp83848.c
|
net: phy: ti: add PHY_RST_AFTER_CLK_EN flag
|
2024-11-05 17:46:03 -08:00 |
dp83867.c
|
net: phy: dp83867: Add support for active-low LEDs
|
2024-02-02 10:12:21 +00:00 |
dp83869.c
|
net: phy: dp83869: fix status reporting for 1000base-x autonegotiation
|
2024-11-14 19:11:03 -08:00 |
et1011c.c
|
|
|
fixed_phy.c
|
net: phy: fixed_phy: set phy_mask before calling mdiobus_register()
|
2022-06-13 23:11:24 -07:00 |
icplus.c
|
net: phy: use ethtool string helpers
|
2024-11-03 11:07:46 -08:00 |
intel-xway.c
|
net: phy: avoid undefined behavior in *_led_polarity_set()
|
2024-12-18 16:50:23 -08:00 |
Kconfig
|
net: phy: mediatek: Re-organize MediaTek ethernet phy drivers
|
2024-11-13 13:06:04 +00:00 |
linkmode.c
|
|
|
lxt.c
|
|
|
Makefile
|
net: phy: mediatek: Re-organize MediaTek ethernet phy drivers
|
2024-11-13 13:06:04 +00:00 |
marvell10g.c
|
net: phy: add helpers to handle sfp phy connect/disconnect
|
2024-08-23 13:04:34 +01:00 |
marvell-88q2xxx.c
|
net: phy: marvell-88q2xxx: Enable auto negotiation for mv88q2110
|
2024-10-08 18:18:16 -07:00 |
marvell-88x2222.c
|
net: phy: add helpers to handle sfp phy connect/disconnect
|
2024-08-23 13:04:34 +01:00 |
marvell.c
|
net: phy: marvell: use phydev->eee_cfg.eee_enabled
|
2024-12-06 17:47:31 -08:00 |
mdio_bus.c
|
driver core: have match() callback in struct bus_type take a const *
|
2024-07-03 15:16:54 +02:00 |
mdio_device.c
|
driver core: have match() callback in struct bus_type take a const *
|
2024-07-03 15:16:54 +02:00 |
mdio_devres.c
|
net: fill in MODULE_DESCRIPTION()s for mdio_devres
|
2024-02-15 08:03:46 -08:00 |
mdio-boardinfo.c
|
|
|
mdio-boardinfo.h
|
|
|
mdio-open-alliance.h
|
drivers/net/phy: add helpers to get/set PLCA configuration
|
2023-01-11 08:35:02 +00:00 |
meson-gxl.c
|
net: phy: meson-gxl: enable edpd tunable support for G12A internal PHY
|
2023-04-04 18:56:01 -07:00 |
micrel.c
|
net: phy: convert eee_broken_modes to a linkmode bitmap
|
2024-11-14 18:01:37 -08:00 |
microchip_t1.c
|
net: phy: microchip_t1: Clause-45 PHY loopback support for LAN887x
|
2024-11-15 15:22:10 -08:00 |
microchip_t1s.c
|
net: phy: microchip_t1s: configure collision detection based on PLCA mode
|
2024-10-11 15:54:40 -07:00 |
microchip.c
|
net: phy: microchip: Reset LAN88xx PHY to ensure clean link state on LAN7800/7850
|
2024-12-02 18:56:41 -08:00 |
mii_timestamper.c
|
|
|
motorcomm.c
|
net: phy: Add driver for Motorcomm yt8821 2.5G ethernet phy
|
2024-09-05 15:21:12 +02:00 |
mxl-gpy.c
|
net: phy: avoid undefined behavior in *_led_polarity_set()
|
2024-12-18 16:50:23 -08:00 |
national.c
|
|
|
ncn26000.c
|
drivers/net/phy: add driver for the onsemi NCN26000 10BASE-T1S PHY
|
2023-01-11 08:35:03 +00:00 |
nxp-c45-tja11xx-macsec.c
|
net: phy: nxp-c45-tja11xx: implement mdo_insert_tx_tag
|
2023-12-27 13:08:10 +00:00 |
nxp-c45-tja11xx.c
|
net: phy: use ethtool string helpers
|
2024-11-03 11:07:46 -08:00 |
nxp-c45-tja11xx.h
|
net: phy: c45-tja11xx: add support for outputting RMII reference clock
|
2024-10-15 10:44:52 +02:00 |
nxp-cbtx.c
|
net: phy: use ethtool string helpers
|
2024-11-03 11:07:46 -08:00 |
nxp-tja11xx.c
|
net: Convert some ethtool_sprintf() to ethtool_puts()
|
2023-12-08 10:56:25 +00:00 |
open_alliance_helpers.c
|
phy: Add Open Alliance helpers for the PHY framework
|
2024-08-16 10:16:26 -07:00 |
open_alliance_helpers.h
|
phy: Add Open Alliance helpers for the PHY framework
|
2024-08-16 10:16:26 -07:00 |
phy_device.c
|
net: Add the possibility to support a selected hwtstamp in netdevice
|
2024-12-16 12:51:40 +00:00 |
phy_led_triggers.c
|
|
|
phy_link_topology.c
|
net: phy: Introduce ethernet link topology representation
|
2024-08-23 13:04:34 +01:00 |
phy-c45.c
|
net: phy: remove genphy_c45_eee_is_active()'s is_enabled arg
|
2024-12-06 17:47:31 -08:00 |
phy-core.c
|
net: phy: convert eee_broken_modes to a linkmode bitmap
|
2024-11-14 18:01:37 -08:00 |
phy.c
|
net: phy: update phy_ethtool_get_eee() documentation
|
2024-12-06 17:47:32 -08:00 |
phylink.c
|
net: phylink: improve phylink_sfp_config_phy() error message with missing PHY driver
|
2024-12-15 13:47:21 -08:00 |
qsemi.c
|
|
|
qt2025.rs
|
net: phy: qt2025: Fix warning: unused import DeviceId
|
2024-10-02 17:44:00 -07:00 |
realtek.c
|
net: phy: realtek: add RTL8125D-internal PHY
|
2024-10-20 11:06:47 -05:00 |
rockchip.c
|
|
|
sfp-bus.c
|
net: sfp: Add helper to return the SFP bus name
|
2024-08-23 13:04:34 +01:00 |
sfp.c
|
net: sfp: change quirks for Alcatel Lucent G-010S-P
|
2024-10-21 10:33:22 +02:00 |
sfp.h
|
net: sfp: Remove unused function declaration sfp_link_configure()
|
2023-08-07 08:53:55 +01:00 |
smsc.c
|
net: phy: smsc: use devm_clk_get_optional_enabled_with_rate()
|
2024-10-08 15:36:28 -07:00 |
spi_ks8995.c
|
net: phy: ks8995: constify 'struct bin_attribute'
|
2024-12-17 19:00:44 -08:00 |
ste10Xp.c
|
|
|
stubs.c
|
net: phy: provide phylib stubs for hardware timestamping operations
|
2023-08-02 19:11:06 -07:00 |
swphy.c
|
|
|
swphy.h
|
|
|
teranetics.c
|
|
|
uPD60620.c
|
|
|
vitesse.c
|
net: phy: vitesse: implement MDI-X configuration in vsc73xx
|
2024-08-27 14:26:49 -07:00 |
xilinx_gmii2rgmii.c
|
net: phy: xilinx-gmii2rgmii: Adopt clock support
|
2024-05-29 13:10:57 +01:00 |