Kernel/linux-stable
1
0
Fork 0
mirror of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git synced 2025-01-17 02:36:21 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
linux-stable/arch/arm/configs/socfpga_defconfig

163 lines
3.4 KiB
Plaintext
Raw Permalink Normal View History

ARM: socfpga: initial support for Altera's SOCFPGA platform Adding core definitions for Altera's SOCFPGA ARM platform. Mininum support for Altera's SOCFPGA Cyclone 5 hardware. Signed-off-by: Dinh Nguyen <dinguyen@altera.com> Reviewed-by: Pavel Machek <pavel@denx.de> Reviewed-by: Rob Herring <rob.herring@calxeda.com> Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-07-18 16:07:18 -06:00
CONFIG_SYSVIPC=y
ARM: socfpga_defconfig: Update defconfig for SoCFPGA Clean up the socfpga_defconfig file by doing: make socfpga_defconfig make make savedefconfig Then add the following to socfpga_defconfig: CONFIG_SIGNALFD=y CONFIG_REGULATOR=y CONFIG_REGULATOR_FIXED_VOLTAGE=y CONFIG_SRAM=y CONFIG_DEVTMPFS_MOUNT=y CONFIG_CONFIGFS_FS=y CONFIG_PMBUS=y CONFIG_SENSORS_PMBUS=y CONFIG_SENSORS_LTC2978=y CONFIG_SENSORS_LTC2978_REGULATOR=y CONFIG_PRINTK_TIME=y CONFIG_EXT4_FS=y Signed-off-by: Thor Thayer <tthayer@opensource.altera.com> Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by: Alan Tull <atull@opensource.altera.com> Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
2014-10-21 23:04:16 +00:00
CONFIG_HIGH_RES_TIMERS=y
ARM: socfpga: initial support for Altera's SOCFPGA platform Adding core definitions for Altera's SOCFPGA ARM platform. Mininum support for Altera's SOCFPGA Cyclone 5 hardware. Signed-off-by: Dinh Nguyen <dinguyen@altera.com> Reviewed-by: Pavel Machek <pavel@denx.de> Reviewed-by: Rob Herring <rob.herring@calxeda.com> Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-07-18 16:07:18 -06:00
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_CGROUPS=y
CONFIG_CPUSETS=y
CONFIG_NAMESPACES=y
ARM: socfpga_defconfig: enable support for initramfs/initrd support Enable CONFIG_BLK_DEV_INITRD. Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com> Acked-by: Kevin Hilman <khilman@baylibre.com>
2016-02-11 16:33:28 -06:00
CONFIG_BLK_DEV_INITRD=y
treewide: drop CONFIG_EMBEDDED There is only one Kconfig user of CONFIG_EMBEDDED and it can be switched to EXPERT or "if !ARCH_MULTIPLATFORM" (suggested by Arnd). Link: https://lkml.kernel.org/r/20230816055010.31534-1-rdunlap@infradead.org Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Palmer Dabbelt <palmer@rivosinc.com> [RISC-V] Acked-by: Greg Ungerer <gerg@linux-m68k.org> Acked-by: Jason A. Donenfeld <Jason@zx2c4.com> Acked-by: Michael Ellerman <mpe@ellerman.id.au> [powerpc] Cc: Russell King <linux@armlinux.org.uk> Cc: Vineet Gupta <vgupta@kernel.org> Cc: Brian Cain <bcain@quicinc.com> Cc: Michal Simek <monstr@monstr.eu> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Dinh Nguyen <dinguyen@kernel.org> Cc: Jonas Bonn <jonas@southpole.se> Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi> Cc: Stafford Horne <shorne@gmail.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Rich Felker <dalias@libc.org> Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Josh Triplett <josh@joshtriplett.org> Cc: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-08-15 22:50:10 -07:00
CONFIG_EXPERT=y
ARM: socfpga: initial support for Altera's SOCFPGA platform Adding core definitions for Altera's SOCFPGA ARM platform. Mininum support for Altera's SOCFPGA Cyclone 5 hardware. Signed-off-by: Dinh Nguyen <dinguyen@altera.com> Reviewed-by: Pavel Machek <pavel@denx.de> Reviewed-by: Rob Herring <rob.herring@calxeda.com> Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-07-18 16:07:18 -06:00
CONFIG_PROFILING=y
ARM: socfpga: drop ARCH_SOCFPGA Simplify 32-bit and 64-bit Intel SoCFPGA Kconfig options by having only one for both of them. After conversion of all drivers to use the new ARCH_INTEL_SOCFPGA, the remaining ARM option can be removed. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
2021-03-11 16:27:44 +01:00
CONFIG_ARCH_INTEL_SOCFPGA=y
ARM: socfpga: initial support for Altera's SOCFPGA platform Adding core definitions for Altera's SOCFPGA ARM platform. Mininum support for Altera's SOCFPGA Cyclone 5 hardware. Signed-off-by: Dinh Nguyen <dinguyen@altera.com> Reviewed-by: Pavel Machek <pavel@denx.de> Reviewed-by: Rob Herring <rob.herring@calxeda.com> Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-07-18 16:07:18 -06:00
CONFIG_ARM_THUMBEE=y
ARM: socfpga: Enable SMP for socfpga Enable SMP for the SOCFPGA platform. Signed-off-by: Pavel Machek <pavel@denx.de> Signed-off-by: Dinh Nguyen <dinguyen@altera.com> Reviewed-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-10-25 10:41:39 -06:00
CONFIG_SMP=y
ARM: socfpga: initial support for Altera's SOCFPGA platform Adding core definitions for Altera's SOCFPGA ARM platform. Mininum support for Altera's SOCFPGA Cyclone 5 hardware. Signed-off-by: Dinh Nguyen <dinguyen@altera.com> Reviewed-by: Pavel Machek <pavel@denx.de> Reviewed-by: Rob Herring <rob.herring@calxeda.com> Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-07-18 16:07:18 -06:00
CONFIG_NR_CPUS=2
ARM: socfpga_defconfig: Enable HIGHMEM All of the SoCFPGA boards have at least 1GB of RAM, so enabling HIGHMEM is necessary to avoid the following warning: [ 0.000000] Truncating RAM at 0x00000000-0x40000000 to -0x30000000 [ 0.000000] Consider using a HIGHMEM enabled kernel. Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
2016-10-25 10:55:40 -05:00
CONFIG_HIGHMEM=y
ARM: socfpga: initial support for Altera's SOCFPGA platform Adding core definitions for Altera's SOCFPGA ARM platform. Mininum support for Altera's SOCFPGA Cyclone 5 hardware. Signed-off-by: Dinh Nguyen <dinguyen@altera.com> Reviewed-by: Pavel Machek <pavel@denx.de> Reviewed-by: Rob Herring <rob.herring@calxeda.com> Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-07-18 16:07:18 -06:00
CONFIG_VFP=y
CONFIG_NEON=y
ARM: socfpga_defconfig: enable BLK_DEV_LOOP config option Add CONFIG_BLK_DEV_LOOP and clean up socfpga_defconfig by make savedefconfig. Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
2019-01-09 09:34:54 -06:00
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
ARM: socfpga: initial support for Altera's SOCFPGA platform Adding core definitions for Altera's SOCFPGA ARM platform. Mininum support for Altera's SOCFPGA Cyclone 5 hardware. Signed-off-by: Dinh Nguyen <dinguyen@altera.com> Reviewed-by: Pavel Machek <pavel@denx.de> Reviewed-by: Rob Herring <rob.herring@calxeda.com> Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-07-18 16:07:18 -06:00
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_NET_KEY=y
CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
ARM: socfpga_defconfig: Update defconfig for SoCFPGA Clean up the socfpga_defconfig file by doing: make socfpga_defconfig make make savedefconfig Then add the following to socfpga_defconfig: CONFIG_SIGNALFD=y CONFIG_REGULATOR=y CONFIG_REGULATOR_FIXED_VOLTAGE=y CONFIG_SRAM=y CONFIG_DEVTMPFS_MOUNT=y CONFIG_CONFIGFS_FS=y CONFIG_PMBUS=y CONFIG_SENSORS_PMBUS=y CONFIG_SENSORS_LTC2978=y CONFIG_SENSORS_LTC2978_REGULATOR=y CONFIG_PRINTK_TIME=y CONFIG_EXT4_FS=y Signed-off-by: Thor Thayer <tthayer@opensource.altera.com> Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by: Alan Tull <atull@opensource.altera.com> Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
2014-10-21 23:04:16 +00:00
CONFIG_NETWORK_PHY_TIMESTAMPING=y
CONFIG_VLAN_8021Q=y
CONFIG_VLAN_8021Q_GVRP=y
ARM: socfpga: Update socfpga_defconfig CONFIG_PM=y CONFIG_SUSPEND=y CONFIG_MMC_UNSAFE_RESUME=y CONFIG_DWMAC_SOCFPGA=y CONFIG_USB=y CONFIG_USB_DWC2=y CONFIG_USB_DWC2_HOST=y CONFIG_USB_DWC2_PLATFORM=y CONFIG_FHANDLE=y CONFIG_I2C=y CONFIG_I2C_DESIGNWARE_CORE=y CONFIG_I2C_DESIGNWARE_PLATFORM=y CONFIG_I2C_CHARDEV=y CONFIG_CAN=y CONFIG_CAN_RAW=y CONFIG_CAN_BCM=y CONFIG_CAN_GW=y CONFIG_CAN_DEV=y CONFIG_CAN_CALC_BITTIMING=y CONFIG_CAN_C_CAN=y CONFIG_CAN_C_CAN_PLATFORM=y CONFIG_WATCHDOG=y CONFIG_DW_WATCHDOG=y CONFIG_GPIOLIB=y CONFIG_GPIO_SYSFS=y CONFIG_GPIO_DWAPB=y CONFIG_PPS=y CONFIG_NETWORK_PHY_TIMESTAMPING=y CONFIG_PTP_1588_CLOCK=y CONFIG_VLAN_8021Q=y CONFIG_VLAN_8021Q_GVRP=y CONFIG_GARP=y CONFIG_IPV6=y CONFIG_HOTPLUG=y Signed-off-by: Vince Bridgers <vbridgers2013@gmail.com> Signed-off-by: Alan Tull <atull@altera.com> Signed-off-by: Thor Thayer <tthayer@altera.com> Signed-off-by: Dinh Nguyen <dinguyen@altear.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-06-23 13:31:09 -05:00
CONFIG_CAN=y
ARM: socfpga_defconfig: enable BLK_DEV_LOOP config option Add CONFIG_BLK_DEV_LOOP and clean up socfpga_defconfig by make savedefconfig. Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
2019-01-09 09:34:54 -06:00
CONFIG_PCI=y
CONFIG_PCI_MSI=y
CONFIG_PCIE_ALTERA=y
CONFIG_PCIE_ALTERA_MSI=y
ARM: socfpga: initial support for Altera's SOCFPGA platform Adding core definitions for Altera's SOCFPGA ARM platform. Mininum support for Altera's SOCFPGA Cyclone 5 hardware. Signed-off-by: Dinh Nguyen <dinguyen@altera.com> Reviewed-by: Pavel Machek <pavel@denx.de> Reviewed-by: Rob Herring <rob.herring@calxeda.com> Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-07-18 16:07:18 -06:00
CONFIG_DEVTMPFS=y
ARM: socfpga_defconfig: Update defconfig for SoCFPGA Clean up the socfpga_defconfig file by doing: make socfpga_defconfig make make savedefconfig Then add the following to socfpga_defconfig: CONFIG_SIGNALFD=y CONFIG_REGULATOR=y CONFIG_REGULATOR_FIXED_VOLTAGE=y CONFIG_SRAM=y CONFIG_DEVTMPFS_MOUNT=y CONFIG_CONFIGFS_FS=y CONFIG_PMBUS=y CONFIG_SENSORS_PMBUS=y CONFIG_SENSORS_LTC2978=y CONFIG_SENSORS_LTC2978_REGULATOR=y CONFIG_PRINTK_TIME=y CONFIG_EXT4_FS=y Signed-off-by: Thor Thayer <tthayer@opensource.altera.com> Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by: Alan Tull <atull@opensource.altera.com> Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
2014-10-21 23:04:16 +00:00
CONFIG_DEVTMPFS_MOUNT=y
ARM: socfpga: defconfig: enable qspi Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
2016-10-18 07:43:04 +00:00
CONFIG_MTD=y
ARM: socfpga_defconfig: update defconfig for SoCFPGA MARVELL_PHY - support for the Marvell PHY that is on most of the devkits EEPROM_AT24 - support for I2C EEPROMs on the devkits GPIO_ALTERA - support for Altera's GPIO driver NAND - support for the Denali NAND controller along with MTD subsystem SPI_DESIGNWARE - support for SPI that is on SoCFPGA SPI_DW_MMIO - support for the memory-mapped io interface for the DW SPI core OF_CONFIGFS - SoCFPGA makes use of DT overlays using configfs, enable it GPIO_ALTERA_A10SR - support for the newly added Altera HWMON driver LEDS - support for the GPIO LEDs on the SoCFPGA devkits RTC - support for the DS1307 RTC JFFS2_FS - support for the JFFS2 filesystem NFS_V4 - supports for v4 NFS FUNCTION_TRACER - supports debug function tracing Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
2016-12-14 04:25:54 -06:00
CONFIG_MTD_BLOCK=y
CONFIG_MTD_M25P80=y
mtd: rawnand: Clarify Kconfig entry MTD_NAND MTD_NAND is large and encloses much more than what the symbol is actually used for: raw NAND. Clarify the symbol by naming it MTD_RAW_NAND instead. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-02-06 16:47:44 +01:00
CONFIG_MTD_RAW_NAND=y
ARM: socfpga_defconfig: update defconfig for SoCFPGA MARVELL_PHY - support for the Marvell PHY that is on most of the devkits EEPROM_AT24 - support for I2C EEPROMs on the devkits GPIO_ALTERA - support for Altera's GPIO driver NAND - support for the Denali NAND controller along with MTD subsystem SPI_DESIGNWARE - support for SPI that is on SoCFPGA SPI_DW_MMIO - support for the memory-mapped io interface for the DW SPI core OF_CONFIGFS - SoCFPGA makes use of DT overlays using configfs, enable it GPIO_ALTERA_A10SR - support for the newly added Altera HWMON driver LEDS - support for the GPIO LEDs on the SoCFPGA devkits RTC - support for the DS1307 RTC JFFS2_FS - support for the JFFS2 filesystem NFS_V4 - supports for v4 NFS FUNCTION_TRACER - supports debug function tracing Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
2016-12-14 04:25:54 -06:00
CONFIG_MTD_NAND_DENALI_DT=y
ARM: socfpga: defconfig: enable qspi Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
2016-10-18 07:43:04 +00:00
CONFIG_MTD_SPI_NOR=y
ARM: socfpga_defconfig: Remove QSPI Sector 4K size force Remove QSPI Sector 4K size force which is causing QSPI boot problems with the JFFS2 root filesystem. Fixes the following error: "Magic bitmask 0x1985 not found at ..." Cc: stable@vger.kernel.org Signed-off-by: Thor Thayer <thor.thayer@linux.intel.com> Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
2018-03-26 14:50:00 -05:00
# CONFIG_MTD_SPI_NOR_USE_4K_SECTORS is not set
ARM: socfpga: updates for socfpga_defconfig This patch enables the following in the socfpga_defconfig: +CONFIG_OF_OVERLAY=y Enable support for Device Tree Overlays +CONFIG_FPGA_REGION=y Enable device tree overlay support for FPGA programming +CONFIG_FPGA_MGR_SOCFPGA_A10=y Enable partial reconfiguration for Altera Arria 10 FPGA +CONFIG_FPGA_BRIDGE=y Enable the FPGA Bridges framework +CONFIG_SOCFPGA_FPGA_BRIDGE=y Enable support for SoCFPGA hardware bridges +CONFIG_ALTERA_FREEZE_BRIDGE=y Enable support for the Altera Soft IP Freeze bridges Signed-off-by: Alan Tull <atull@opensource.altera.com>
2016-11-02 16:22:36 -05:00
CONFIG_OF_OVERLAY=y
ARM: socfpga_defconfig: enable BLK_DEV_LOOP config option Add CONFIG_BLK_DEV_LOOP and clean up socfpga_defconfig by make savedefconfig. Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
2019-01-09 09:34:54 -06:00
CONFIG_BLK_DEV_LOOP=y
ARM: socfpga: initial support for Altera's SOCFPGA platform Adding core definitions for Altera's SOCFPGA ARM platform. Mininum support for Altera's SOCFPGA Cyclone 5 hardware. Signed-off-by: Dinh Nguyen <dinguyen@altera.com> Reviewed-by: Pavel Machek <pavel@denx.de> Reviewed-by: Rob Herring <rob.herring@calxeda.com> Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-07-18 16:07:18 -06:00
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=2
CONFIG_BLK_DEV_RAM_SIZE=8192
ARM: socfpga: add PCIe to socfpga_defconfig Enable Altera PCIe host driver, Altera MSI driver and PCIe devices. CONFIG_PCI=y CONFIG_PCI_MSI=y CONFIG_PCIE_ALTERA=y CONFIG_PCIE_ALTERA_MSI=y CONFIG_BLK_DEV_NVME=m CONFIG_E1000E=m CONFIG_IGB=m CONFIG_IXGBE=m Signed-off-by: Ley Foon Tan <lftan@altera.com> Signed-off-by: Tien Hock Loh <thloh@altera.com> Cc: Dinh Nguyen <dinguyen@opensource.altera.com> Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
2016-06-15 14:49:04 +08:00
CONFIG_BLK_DEV_NVME=m
ARM: socfpga_defconfig: Update defconfig for SoCFPGA Clean up the socfpga_defconfig file by doing: make socfpga_defconfig make make savedefconfig Then add the following to socfpga_defconfig: CONFIG_SIGNALFD=y CONFIG_REGULATOR=y CONFIG_REGULATOR_FIXED_VOLTAGE=y CONFIG_SRAM=y CONFIG_DEVTMPFS_MOUNT=y CONFIG_CONFIGFS_FS=y CONFIG_PMBUS=y CONFIG_SENSORS_PMBUS=y CONFIG_SENSORS_LTC2978=y CONFIG_SENSORS_LTC2978_REGULATOR=y CONFIG_PRINTK_TIME=y CONFIG_EXT4_FS=y Signed-off-by: Thor Thayer <tthayer@opensource.altera.com> Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by: Alan Tull <atull@opensource.altera.com> Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
2014-10-21 23:04:16 +00:00
CONFIG_SRAM=y
ARM: socfpga_defconfig: update defconfig for SoCFPGA MARVELL_PHY - support for the Marvell PHY that is on most of the devkits EEPROM_AT24 - support for I2C EEPROMs on the devkits GPIO_ALTERA - support for Altera's GPIO driver NAND - support for the Denali NAND controller along with MTD subsystem SPI_DESIGNWARE - support for SPI that is on SoCFPGA SPI_DW_MMIO - support for the memory-mapped io interface for the DW SPI core OF_CONFIGFS - SoCFPGA makes use of DT overlays using configfs, enable it GPIO_ALTERA_A10SR - support for the newly added Altera HWMON driver LEDS - support for the GPIO LEDs on the SoCFPGA devkits RTC - support for the DS1307 RTC JFFS2_FS - support for the JFFS2 filesystem NFS_V4 - supports for v4 NFS FUNCTION_TRACER - supports debug function tracing Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
2016-12-14 04:25:54 -06:00
CONFIG_EEPROM_AT24=y
ARM: socfpga: initial support for Altera's SOCFPGA platform Adding core definitions for Altera's SOCFPGA ARM platform. Mininum support for Altera's SOCFPGA Cyclone 5 hardware. Signed-off-by: Dinh Nguyen <dinguyen@altera.com> Reviewed-by: Pavel Machek <pavel@denx.de> Reviewed-by: Rob Herring <rob.herring@calxeda.com> Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-07-18 16:07:18 -06:00
CONFIG_SCSI=y
# CONFIG_SCSI_PROC_FS is not set
CONFIG_BLK_DEV_SD=y
ARM: refresh defconfig files A lot of Kconfig options have changed over the years, and we tend to not do a blind 'make defconfig' to refresh the files, to ensure we catch options that should not have gone away. I used some a bit of scripting to only rework the bits where an option moved around in any of the defconfig files, without also dropping any of the other lines, to make it clearer which options we no longer have. Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Sudeep Holla <sudeep.holla@arm.com> Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-07-20 14:47:57 +02:00
# CONFIG_BLK_DEV_BSG is not set
ARM: socfpga: initial support for Altera's SOCFPGA platform Adding core definitions for Altera's SOCFPGA ARM platform. Mininum support for Altera's SOCFPGA Cyclone 5 hardware. Signed-off-by: Dinh Nguyen <dinguyen@altera.com> Reviewed-by: Pavel Machek <pavel@denx.de> Reviewed-by: Rob Herring <rob.herring@calxeda.com> Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-07-18 16:07:18 -06:00
# CONFIG_SCSI_LOWLEVEL is not set
CONFIG_NETDEVICES=y
ARM: socfpga: updates for socfpga_defconfig This patch enables Altera TSE support in socfpga_defconfig Signed-off-by: Jia Jie Ho <ho.jia.jie@intel.com> Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
2017-03-16 08:05:46 -05:00
CONFIG_ALTERA_TSE=m
ARM: socfpga: add PCIe to socfpga_defconfig Enable Altera PCIe host driver, Altera MSI driver and PCIe devices. CONFIG_PCI=y CONFIG_PCI_MSI=y CONFIG_PCIE_ALTERA=y CONFIG_PCIE_ALTERA_MSI=y CONFIG_BLK_DEV_NVME=m CONFIG_E1000E=m CONFIG_IGB=m CONFIG_IXGBE=m Signed-off-by: Ley Foon Tan <lftan@altera.com> Signed-off-by: Tien Hock Loh <thloh@altera.com> Cc: Dinh Nguyen <dinguyen@opensource.altera.com> Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
2016-06-15 14:49:04 +08:00
CONFIG_E1000E=m
CONFIG_IGB=m
CONFIG_IXGBE=m
ARM: socfpga: initial support for Altera's SOCFPGA platform Adding core definitions for Altera's SOCFPGA ARM platform. Mininum support for Altera's SOCFPGA Cyclone 5 hardware. Signed-off-by: Dinh Nguyen <dinguyen@altera.com> Reviewed-by: Pavel Machek <pavel@denx.de> Reviewed-by: Rob Herring <rob.herring@calxeda.com> Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-07-18 16:07:18 -06:00
CONFIG_STMMAC_ETH=y
ARM: socfpga_defconfig: update defconfig for SoCFPGA MARVELL_PHY - support for the Marvell PHY that is on most of the devkits EEPROM_AT24 - support for I2C EEPROMs on the devkits GPIO_ALTERA - support for Altera's GPIO driver NAND - support for the Denali NAND controller along with MTD subsystem SPI_DESIGNWARE - support for SPI that is on SoCFPGA SPI_DW_MMIO - support for the memory-mapped io interface for the DW SPI core OF_CONFIGFS - SoCFPGA makes use of DT overlays using configfs, enable it GPIO_ALTERA_A10SR - support for the newly added Altera HWMON driver LEDS - support for the GPIO LEDs on the SoCFPGA devkits RTC - support for the DS1307 RTC JFFS2_FS - support for the JFFS2 filesystem NFS_V4 - supports for v4 NFS FUNCTION_TRACER - supports debug function tracing Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
2016-12-14 04:25:54 -06:00
CONFIG_MARVELL_PHY=y
ARM: socfpga: Update socfpga_defconfig CONFIG_MICREL_PHY=y CONFIG_EXT3_FS=y CONFIG_NFS_FS=y CONFIG_ROOT_NFS=y CONFIG_MMC=y CONFIG_MMC_DW=y Signed-off-by: Dinh Nguyen <dinguyen@altera.com>
2013-07-17 16:17:16 -05:00
CONFIG_MICREL_PHY=y
ARM: defconfig: reorder defconfig files The debug-info and can subystem options have moved around in the 'savedefconfig' output, so fix these up to reduce the clutter from the savedefconfig command. Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-08-11 15:56:36 +02:00
CONFIG_CAN_C_CAN=y
CONFIG_CAN_C_CAN_PLATFORM=y
CONFIG_CAN_DEBUG_DEVICES=y
ARM: socfpga: initial support for Altera's SOCFPGA platform Adding core definitions for Altera's SOCFPGA ARM platform. Mininum support for Altera's SOCFPGA Cyclone 5 hardware. Signed-off-by: Dinh Nguyen <dinguyen@altera.com> Reviewed-by: Pavel Machek <pavel@denx.de> Reviewed-by: Rob Herring <rob.herring@calxeda.com> Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-07-18 16:07:18 -06:00
CONFIG_INPUT_EVDEV=y
ARM: socfpga: Update socfpga_defconfig Enable the following bits: CONFIG_TOUCHSCREEN_STMPE - STMPE touchscreen support, needed on MCVEVK as it contains the chip. This also enables the STMPE MFD device and touchscreen input support. CONFIG_USB_STORAGE - USB storage support is often used, so enable it. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Dinh Nguyen <dinguyen@opensource.altera.com> Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
2016-05-05 20:33:14 +00:00
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_STMPE=y
ARM: socfpga: initial support for Altera's SOCFPGA platform Adding core definitions for Altera's SOCFPGA ARM platform. Mininum support for Altera's SOCFPGA Cyclone 5 hardware. Signed-off-by: Dinh Nguyen <dinguyen@altera.com> Reviewed-by: Pavel Machek <pavel@denx.de> Reviewed-by: Rob Herring <rob.herring@calxeda.com> Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-07-18 16:07:18 -06:00
# CONFIG_SERIO_SERPORT is not set
CONFIG_SERIO_AMBAKMI=y
CONFIG_LEGACY_PTY_COUNT=16
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_NR_UARTS=2
CONFIG_SERIAL_8250_RUNTIME_UARTS=2
CONFIG_SERIAL_8250_DW=y
ARM: socfpga_defconfig: Update defconfig for SoCFPGA Clean up the socfpga_defconfig file by doing: make socfpga_defconfig make make savedefconfig Then add the following to socfpga_defconfig: CONFIG_SIGNALFD=y CONFIG_REGULATOR=y CONFIG_REGULATOR_FIXED_VOLTAGE=y CONFIG_SRAM=y CONFIG_DEVTMPFS_MOUNT=y CONFIG_CONFIGFS_FS=y CONFIG_PMBUS=y CONFIG_SENSORS_PMBUS=y CONFIG_SENSORS_LTC2978=y CONFIG_SENSORS_LTC2978_REGULATOR=y CONFIG_PRINTK_TIME=y CONFIG_EXT4_FS=y Signed-off-by: Thor Thayer <tthayer@opensource.altera.com> Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by: Alan Tull <atull@opensource.altera.com> Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
2014-10-21 23:04:16 +00:00
CONFIG_I2C=y
CONFIG_I2C_CHARDEV=y
ARM: configs: enable I2C_DESIGNWARE_CORE with I2C_DESIGNWARE_PLATFORM The dependency handling of the Synopsys DesignWare I2C adapter drivers is going to be changed so that the glue drivers for the PCI and platform buses depend on I2C_DESIGNWARE_CORE. Cc: Russell King <linux@armlinux.org.uk> Cc: Dinh Nguyen <dinguyen@kernel.org> Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
2024-09-03 17:25:01 +03:00
CONFIG_I2C_DESIGNWARE_CORE=y
ARM: socfpga_defconfig: Update defconfig for SoCFPGA Clean up the socfpga_defconfig file by doing: make socfpga_defconfig make make savedefconfig Then add the following to socfpga_defconfig: CONFIG_SIGNALFD=y CONFIG_REGULATOR=y CONFIG_REGULATOR_FIXED_VOLTAGE=y CONFIG_SRAM=y CONFIG_DEVTMPFS_MOUNT=y CONFIG_CONFIGFS_FS=y CONFIG_PMBUS=y CONFIG_SENSORS_PMBUS=y CONFIG_SENSORS_LTC2978=y CONFIG_SENSORS_LTC2978_REGULATOR=y CONFIG_PRINTK_TIME=y CONFIG_EXT4_FS=y Signed-off-by: Thor Thayer <tthayer@opensource.altera.com> Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by: Alan Tull <atull@opensource.altera.com> Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
2014-10-21 23:04:16 +00:00
CONFIG_I2C_DESIGNWARE_PLATFORM=y
ARM: socfpga_defconfig: update defconfig for SoCFPGA MARVELL_PHY - support for the Marvell PHY that is on most of the devkits EEPROM_AT24 - support for I2C EEPROMs on the devkits GPIO_ALTERA - support for Altera's GPIO driver NAND - support for the Denali NAND controller along with MTD subsystem SPI_DESIGNWARE - support for SPI that is on SoCFPGA SPI_DW_MMIO - support for the memory-mapped io interface for the DW SPI core OF_CONFIGFS - SoCFPGA makes use of DT overlays using configfs, enable it GPIO_ALTERA_A10SR - support for the newly added Altera HWMON driver LEDS - support for the GPIO LEDs on the SoCFPGA devkits RTC - support for the DS1307 RTC JFFS2_FS - support for the JFFS2 filesystem NFS_V4 - supports for v4 NFS FUNCTION_TRACER - supports debug function tracing Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
2016-12-14 04:25:54 -06:00
CONFIG_SPI=y
ARM: refresh defconfig files A lot of Kconfig options have changed over the years, and we tend to not do a blind 'make defconfig' to refresh the files, to ensure we catch options that should not have gone away. I used some a bit of scripting to only rework the bits where an option moved around in any of the defconfig files, without also dropping any of the other lines, to make it clearer which options we no longer have. Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Sudeep Holla <sudeep.holla@arm.com> Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-07-20 14:47:57 +02:00
CONFIG_SPI_CADENCE_QUADSPI=y
ARM: socfpga_defconfig: update defconfig for SoCFPGA MARVELL_PHY - support for the Marvell PHY that is on most of the devkits EEPROM_AT24 - support for I2C EEPROMs on the devkits GPIO_ALTERA - support for Altera's GPIO driver NAND - support for the Denali NAND controller along with MTD subsystem SPI_DESIGNWARE - support for SPI that is on SoCFPGA SPI_DW_MMIO - support for the memory-mapped io interface for the DW SPI core OF_CONFIGFS - SoCFPGA makes use of DT overlays using configfs, enable it GPIO_ALTERA_A10SR - support for the newly added Altera HWMON driver LEDS - support for the GPIO LEDs on the SoCFPGA devkits RTC - support for the DS1307 RTC JFFS2_FS - support for the JFFS2 filesystem NFS_V4 - supports for v4 NFS FUNCTION_TRACER - supports debug function tracing Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
2016-12-14 04:25:54 -06:00
CONFIG_SPI_DESIGNWARE=y
CONFIG_SPI_DW_MMIO=y
CONFIG_SPI_SPIDEV=y
ARM: socfpga: Update socfpga_defconfig CONFIG_PM=y CONFIG_SUSPEND=y CONFIG_MMC_UNSAFE_RESUME=y CONFIG_DWMAC_SOCFPGA=y CONFIG_USB=y CONFIG_USB_DWC2=y CONFIG_USB_DWC2_HOST=y CONFIG_USB_DWC2_PLATFORM=y CONFIG_FHANDLE=y CONFIG_I2C=y CONFIG_I2C_DESIGNWARE_CORE=y CONFIG_I2C_DESIGNWARE_PLATFORM=y CONFIG_I2C_CHARDEV=y CONFIG_CAN=y CONFIG_CAN_RAW=y CONFIG_CAN_BCM=y CONFIG_CAN_GW=y CONFIG_CAN_DEV=y CONFIG_CAN_CALC_BITTIMING=y CONFIG_CAN_C_CAN=y CONFIG_CAN_C_CAN_PLATFORM=y CONFIG_WATCHDOG=y CONFIG_DW_WATCHDOG=y CONFIG_GPIOLIB=y CONFIG_GPIO_SYSFS=y CONFIG_GPIO_DWAPB=y CONFIG_PPS=y CONFIG_NETWORK_PHY_TIMESTAMPING=y CONFIG_PTP_1588_CLOCK=y CONFIG_VLAN_8021Q=y CONFIG_VLAN_8021Q_GVRP=y CONFIG_GARP=y CONFIG_IPV6=y CONFIG_HOTPLUG=y Signed-off-by: Vince Bridgers <vbridgers2013@gmail.com> Signed-off-by: Alan Tull <atull@altera.com> Signed-off-by: Thor Thayer <tthayer@altera.com> Signed-off-by: Dinh Nguyen <dinguyen@altear.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-06-23 13:31:09 -05:00
CONFIG_GPIOLIB=y
CONFIG_GPIO_SYSFS=y
ARM: socfpga_defconfig: update defconfig for SoCFPGA MARVELL_PHY - support for the Marvell PHY that is on most of the devkits EEPROM_AT24 - support for I2C EEPROMs on the devkits GPIO_ALTERA - support for Altera's GPIO driver NAND - support for the Denali NAND controller along with MTD subsystem SPI_DESIGNWARE - support for SPI that is on SoCFPGA SPI_DW_MMIO - support for the memory-mapped io interface for the DW SPI core OF_CONFIGFS - SoCFPGA makes use of DT overlays using configfs, enable it GPIO_ALTERA_A10SR - support for the newly added Altera HWMON driver LEDS - support for the GPIO LEDs on the SoCFPGA devkits RTC - support for the DS1307 RTC JFFS2_FS - support for the JFFS2 filesystem NFS_V4 - supports for v4 NFS FUNCTION_TRACER - supports debug function tracing Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
2016-12-14 04:25:54 -06:00
CONFIG_GPIO_ALTERA=y
ARM: socfpga: Update socfpga_defconfig CONFIG_PM=y CONFIG_SUSPEND=y CONFIG_MMC_UNSAFE_RESUME=y CONFIG_DWMAC_SOCFPGA=y CONFIG_USB=y CONFIG_USB_DWC2=y CONFIG_USB_DWC2_HOST=y CONFIG_USB_DWC2_PLATFORM=y CONFIG_FHANDLE=y CONFIG_I2C=y CONFIG_I2C_DESIGNWARE_CORE=y CONFIG_I2C_DESIGNWARE_PLATFORM=y CONFIG_I2C_CHARDEV=y CONFIG_CAN=y CONFIG_CAN_RAW=y CONFIG_CAN_BCM=y CONFIG_CAN_GW=y CONFIG_CAN_DEV=y CONFIG_CAN_CALC_BITTIMING=y CONFIG_CAN_C_CAN=y CONFIG_CAN_C_CAN_PLATFORM=y CONFIG_WATCHDOG=y CONFIG_DW_WATCHDOG=y CONFIG_GPIOLIB=y CONFIG_GPIO_SYSFS=y CONFIG_GPIO_DWAPB=y CONFIG_PPS=y CONFIG_NETWORK_PHY_TIMESTAMPING=y CONFIG_PTP_1588_CLOCK=y CONFIG_VLAN_8021Q=y CONFIG_VLAN_8021Q_GVRP=y CONFIG_GARP=y CONFIG_IPV6=y CONFIG_HOTPLUG=y Signed-off-by: Vince Bridgers <vbridgers2013@gmail.com> Signed-off-by: Alan Tull <atull@altera.com> Signed-off-by: Thor Thayer <tthayer@altera.com> Signed-off-by: Dinh Nguyen <dinguyen@altear.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-06-23 13:31:09 -05:00
CONFIG_GPIO_DWAPB=y
ARM: socfpga_defconfig: update defconfig for SoCFPGA MARVELL_PHY - support for the Marvell PHY that is on most of the devkits EEPROM_AT24 - support for I2C EEPROMs on the devkits GPIO_ALTERA - support for Altera's GPIO driver NAND - support for the Denali NAND controller along with MTD subsystem SPI_DESIGNWARE - support for SPI that is on SoCFPGA SPI_DW_MMIO - support for the memory-mapped io interface for the DW SPI core OF_CONFIGFS - SoCFPGA makes use of DT overlays using configfs, enable it GPIO_ALTERA_A10SR - support for the newly added Altera HWMON driver LEDS - support for the GPIO LEDs on the SoCFPGA devkits RTC - support for the DS1307 RTC JFFS2_FS - support for the JFFS2 filesystem NFS_V4 - supports for v4 NFS FUNCTION_TRACER - supports debug function tracing Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
2016-12-14 04:25:54 -06:00
CONFIG_GPIO_ALTERA_A10SR=y
CONFIG_SENSORS_MAX1619=y
ARM: socfpga_defconfig: Update defconfig for SoCFPGA Clean up the socfpga_defconfig file by doing: make socfpga_defconfig make make savedefconfig Then add the following to socfpga_defconfig: CONFIG_SIGNALFD=y CONFIG_REGULATOR=y CONFIG_REGULATOR_FIXED_VOLTAGE=y CONFIG_SRAM=y CONFIG_DEVTMPFS_MOUNT=y CONFIG_CONFIGFS_FS=y CONFIG_PMBUS=y CONFIG_SENSORS_PMBUS=y CONFIG_SENSORS_LTC2978=y CONFIG_SENSORS_LTC2978_REGULATOR=y CONFIG_PRINTK_TIME=y CONFIG_EXT4_FS=y Signed-off-by: Thor Thayer <tthayer@opensource.altera.com> Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by: Alan Tull <atull@opensource.altera.com> Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
2014-10-21 23:04:16 +00:00
CONFIG_PMBUS=y
CONFIG_SENSORS_LTC2978=y
CONFIG_SENSORS_LTC2978_REGULATOR=y
ARM: socfpga: Update socfpga_defconfig CONFIG_PM=y CONFIG_SUSPEND=y CONFIG_MMC_UNSAFE_RESUME=y CONFIG_DWMAC_SOCFPGA=y CONFIG_USB=y CONFIG_USB_DWC2=y CONFIG_USB_DWC2_HOST=y CONFIG_USB_DWC2_PLATFORM=y CONFIG_FHANDLE=y CONFIG_I2C=y CONFIG_I2C_DESIGNWARE_CORE=y CONFIG_I2C_DESIGNWARE_PLATFORM=y CONFIG_I2C_CHARDEV=y CONFIG_CAN=y CONFIG_CAN_RAW=y CONFIG_CAN_BCM=y CONFIG_CAN_GW=y CONFIG_CAN_DEV=y CONFIG_CAN_CALC_BITTIMING=y CONFIG_CAN_C_CAN=y CONFIG_CAN_C_CAN_PLATFORM=y CONFIG_WATCHDOG=y CONFIG_DW_WATCHDOG=y CONFIG_GPIOLIB=y CONFIG_GPIO_SYSFS=y CONFIG_GPIO_DWAPB=y CONFIG_PPS=y CONFIG_NETWORK_PHY_TIMESTAMPING=y CONFIG_PTP_1588_CLOCK=y CONFIG_VLAN_8021Q=y CONFIG_VLAN_8021Q_GVRP=y CONFIG_GARP=y CONFIG_IPV6=y CONFIG_HOTPLUG=y Signed-off-by: Vince Bridgers <vbridgers2013@gmail.com> Signed-off-by: Alan Tull <atull@altera.com> Signed-off-by: Thor Thayer <tthayer@altera.com> Signed-off-by: Dinh Nguyen <dinguyen@altear.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-06-23 13:31:09 -05:00
CONFIG_WATCHDOG=y
CONFIG_DW_WATCHDOG=y
ARM: socfpga_defconfig: update defconfig for SoCFPGA MARVELL_PHY - support for the Marvell PHY that is on most of the devkits EEPROM_AT24 - support for I2C EEPROMs on the devkits GPIO_ALTERA - support for Altera's GPIO driver NAND - support for the Denali NAND controller along with MTD subsystem SPI_DESIGNWARE - support for SPI that is on SoCFPGA SPI_DW_MMIO - support for the memory-mapped io interface for the DW SPI core OF_CONFIGFS - SoCFPGA makes use of DT overlays using configfs, enable it GPIO_ALTERA_A10SR - support for the newly added Altera HWMON driver LEDS - support for the GPIO LEDs on the SoCFPGA devkits RTC - support for the DS1307 RTC JFFS2_FS - support for the JFFS2 filesystem NFS_V4 - supports for v4 NFS FUNCTION_TRACER - supports debug function tracing Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
2016-12-14 04:25:54 -06:00
CONFIG_MFD_ALTERA_A10SR=y
ARM: socfpga_defconfig: Enable CONFIG_MTD_ALTERA_SYSMGR Add System Manager driver by default for SOCFPGA ARM32 platforms. Signed-off-by: Thor Thayer <thor.thayer@linux.intel.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-03-11 17:18:05 -05:00
CONFIG_MFD_ALTERA_SYSMGR=y
ARM: socfpga: Update socfpga_defconfig Enable the following bits: CONFIG_TOUCHSCREEN_STMPE - STMPE touchscreen support, needed on MCVEVK as it contains the chip. This also enables the STMPE MFD device and touchscreen input support. CONFIG_USB_STORAGE - USB storage support is often used, so enable it. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Dinh Nguyen <dinguyen@opensource.altera.com> Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
2016-05-05 20:33:14 +00:00
CONFIG_MFD_STMPE=y
ARM: socfpga_defconfig: Update defconfig for SoCFPGA Clean up the socfpga_defconfig file by doing: make socfpga_defconfig make make savedefconfig Then add the following to socfpga_defconfig: CONFIG_SIGNALFD=y CONFIG_REGULATOR=y CONFIG_REGULATOR_FIXED_VOLTAGE=y CONFIG_SRAM=y CONFIG_DEVTMPFS_MOUNT=y CONFIG_CONFIGFS_FS=y CONFIG_PMBUS=y CONFIG_SENSORS_PMBUS=y CONFIG_SENSORS_LTC2978=y CONFIG_SENSORS_LTC2978_REGULATOR=y CONFIG_PRINTK_TIME=y CONFIG_EXT4_FS=y Signed-off-by: Thor Thayer <tthayer@opensource.altera.com> Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by: Alan Tull <atull@opensource.altera.com> Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
2014-10-21 23:04:16 +00:00
CONFIG_REGULATOR=y
CONFIG_REGULATOR_FIXED_VOLTAGE=y
CONFIG_USB=y
ARM: socfpga: Update socfpga_defconfig Enable the following bits: CONFIG_TOUCHSCREEN_STMPE - STMPE touchscreen support, needed on MCVEVK as it contains the chip. This also enables the STMPE MFD device and touchscreen input support. CONFIG_USB_STORAGE - USB storage support is often used, so enable it. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Dinh Nguyen <dinguyen@opensource.altera.com> Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
2016-05-05 20:33:14 +00:00
CONFIG_USB_STORAGE=y
ARM: socfpga_defconfig: Update defconfig for SoCFPGA Clean up the socfpga_defconfig file by doing: make socfpga_defconfig make make savedefconfig Then add the following to socfpga_defconfig: CONFIG_SIGNALFD=y CONFIG_REGULATOR=y CONFIG_REGULATOR_FIXED_VOLTAGE=y CONFIG_SRAM=y CONFIG_DEVTMPFS_MOUNT=y CONFIG_CONFIGFS_FS=y CONFIG_PMBUS=y CONFIG_SENSORS_PMBUS=y CONFIG_SENSORS_LTC2978=y CONFIG_SENSORS_LTC2978_REGULATOR=y CONFIG_PRINTK_TIME=y CONFIG_EXT4_FS=y Signed-off-by: Thor Thayer <tthayer@opensource.altera.com> Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by: Alan Tull <atull@opensource.altera.com> Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
2014-10-21 23:04:16 +00:00
CONFIG_USB_DWC2=y
arm: socfpga_defconfig: enable USB dual-role and cleanup Enable USB OTG dual-role and a bit of clean up by using make savedefconfig. Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
2015-12-03 16:17:55 -06:00
CONFIG_NOP_USB_XCEIV=y
CONFIG_USB_GADGET=y
ARM: socfpga_defconfig: Update defconfig for SoCFPGA Clean up the socfpga_defconfig file by doing: make socfpga_defconfig make make savedefconfig Then add the following to socfpga_defconfig: CONFIG_SIGNALFD=y CONFIG_REGULATOR=y CONFIG_REGULATOR_FIXED_VOLTAGE=y CONFIG_SRAM=y CONFIG_DEVTMPFS_MOUNT=y CONFIG_CONFIGFS_FS=y CONFIG_PMBUS=y CONFIG_SENSORS_PMBUS=y CONFIG_SENSORS_LTC2978=y CONFIG_SENSORS_LTC2978_REGULATOR=y CONFIG_PRINTK_TIME=y CONFIG_EXT4_FS=y Signed-off-by: Thor Thayer <tthayer@opensource.altera.com> Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by: Alan Tull <atull@opensource.altera.com> Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
2014-10-21 23:04:16 +00:00
CONFIG_MMC=y
CONFIG_MMC_DW=y
ARM: socfpga_defconfig: update defconfig for SoCFPGA MARVELL_PHY - support for the Marvell PHY that is on most of the devkits EEPROM_AT24 - support for I2C EEPROMs on the devkits GPIO_ALTERA - support for Altera's GPIO driver NAND - support for the Denali NAND controller along with MTD subsystem SPI_DESIGNWARE - support for SPI that is on SoCFPGA SPI_DW_MMIO - support for the memory-mapped io interface for the DW SPI core OF_CONFIGFS - SoCFPGA makes use of DT overlays using configfs, enable it GPIO_ALTERA_A10SR - support for the newly added Altera HWMON driver LEDS - support for the GPIO LEDs on the SoCFPGA devkits RTC - support for the DS1307 RTC JFFS2_FS - support for the JFFS2 filesystem NFS_V4 - supports for v4 NFS FUNCTION_TRACER - supports debug function tracing Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
2016-12-14 04:25:54 -06:00
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
CONFIG_LEDS_GPIO=y
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_CPU=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_DS1307=y
ARM: socfpga: enable PL330 DMA in socfpga_defconfig Enable the PL330 DMA and DMATEST on SoCFPGA. make savedefconfig says CONFIG_FHANDLE is not needed in the defconfig, remove it. Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com> --- v2: Also enable DMATEST as a kernel module
2016-06-14 15:51:48 -05:00
CONFIG_DMADEVICES=y
CONFIG_PL330_DMA=y
CONFIG_DMATEST=m
ARM: socfpga_defconfig: enable LTC2497 Enable the LTC2497 driver to support the two LTC2497's that are on the SoCFPGA Arria10 Devkit. Signed-off-by: Alan Tull <atull@kernel.org> Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
2019-04-24 10:39:16 -05:00
CONFIG_IIO=y
CONFIG_LTC2497=y
ARM: socfpga_defconfig: enable fpga manager Enable fpga manager framework and low level driver for socfpga in socfpga_defconfig Signed-off-by: Alan Tull <atull@opensource.altera.com> Reviewed-by: Moritz Fischer <moritz.fischer@ettus.com> Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
2015-10-13 18:30:02 +00:00
CONFIG_FPGA=y
CONFIG_FPGA_MGR_SOCFPGA=y
ARM: socfpga: updates for socfpga_defconfig This patch enables the following in the socfpga_defconfig: +CONFIG_OF_OVERLAY=y Enable support for Device Tree Overlays +CONFIG_FPGA_REGION=y Enable device tree overlay support for FPGA programming +CONFIG_FPGA_MGR_SOCFPGA_A10=y Enable partial reconfiguration for Altera Arria 10 FPGA +CONFIG_FPGA_BRIDGE=y Enable the FPGA Bridges framework +CONFIG_SOCFPGA_FPGA_BRIDGE=y Enable support for SoCFPGA hardware bridges +CONFIG_ALTERA_FREEZE_BRIDGE=y Enable support for the Altera Soft IP Freeze bridges Signed-off-by: Alan Tull <atull@opensource.altera.com>
2016-11-02 16:22:36 -05:00
CONFIG_FPGA_MGR_SOCFPGA_A10=y
CONFIG_FPGA_BRIDGE=y
CONFIG_SOCFPGA_FPGA_BRIDGE=y
CONFIG_ALTERA_FREEZE_BRIDGE=y
ARM: socfpga_defconfig: enable BLK_DEV_LOOP config option Add CONFIG_BLK_DEV_LOOP and clean up socfpga_defconfig by make savedefconfig. Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
2019-01-09 09:34:54 -06:00
CONFIG_FPGA_REGION=y
ARM: socfpga: initial support for Altera's SOCFPGA platform Adding core definitions for Altera's SOCFPGA ARM platform. Mininum support for Altera's SOCFPGA Cyclone 5 hardware. Signed-off-by: Dinh Nguyen <dinguyen@altera.com> Reviewed-by: Pavel Machek <pavel@denx.de> Reviewed-by: Rob Herring <rob.herring@calxeda.com> Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-07-18 16:07:18 -06:00
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
ARM: socfpga: Update socfpga_defconfig CONFIG_MICREL_PHY=y CONFIG_EXT3_FS=y CONFIG_NFS_FS=y CONFIG_ROOT_NFS=y CONFIG_MMC=y CONFIG_MMC_DW=y Signed-off-by: Dinh Nguyen <dinguyen@altera.com>
2013-07-17 16:17:16 -05:00
CONFIG_EXT3_FS=y
arch/*/configs/*defconfig: Replace AUTOFS4_FS by AUTOFS_FS Commit a2225d931f75 ("autofs: remove left-over autofs4 stubs") promised the removal of the fs/autofs/Kconfig fragment for AUTOFS4_FS within a couple of releases, but five years later this still has not happened yet, and AUTOFS4_FS is still enabled in 63 defconfigs. Get rid of it mechanically: git grep -l CONFIG_AUTOFS4_FS -- '*defconfig' | xargs sed -i 's/AUTOFS4_FS/AUTOFS_FS/' Also just remove the AUTOFS4_FS config option stub. Anybody who hasn't regenerated their config file in the last five years will need to just get the new name right when they do. Signed-off-by: Sven Joachim <svenjoac@gmx.de> Acked-by: Ian Kent <raven@themaw.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2023-07-27 22:00:41 +02:00
CONFIG_AUTOFS_FS=y
ARM: socfpga: initial support for Altera's SOCFPGA platform Adding core definitions for Altera's SOCFPGA ARM platform. Mininum support for Altera's SOCFPGA Cyclone 5 hardware. Signed-off-by: Dinh Nguyen <dinguyen@altera.com> Reviewed-by: Pavel Machek <pavel@denx.de> Reviewed-by: Rob Herring <rob.herring@calxeda.com> Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-07-18 16:07:18 -06:00
CONFIG_VFAT_FS=y
CONFIG_NTFS_FS=y
CONFIG_NTFS_RW=y
CONFIG_TMPFS=y
ARM: socfpga_defconfig: update defconfig for SoCFPGA MARVELL_PHY - support for the Marvell PHY that is on most of the devkits EEPROM_AT24 - support for I2C EEPROMs on the devkits GPIO_ALTERA - support for Altera's GPIO driver NAND - support for the Denali NAND controller along with MTD subsystem SPI_DESIGNWARE - support for SPI that is on SoCFPGA SPI_DW_MMIO - support for the memory-mapped io interface for the DW SPI core OF_CONFIGFS - SoCFPGA makes use of DT overlays using configfs, enable it GPIO_ALTERA_A10SR - support for the newly added Altera HWMON driver LEDS - support for the GPIO LEDs on the SoCFPGA devkits RTC - support for the DS1307 RTC JFFS2_FS - support for the JFFS2 filesystem NFS_V4 - supports for v4 NFS FUNCTION_TRACER - supports debug function tracing Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
2016-12-14 04:25:54 -06:00
CONFIG_JFFS2_FS=y
ARM: socfpga_defconfig: Update defconfig for SoCFPGA Clean up the socfpga_defconfig file by doing: make socfpga_defconfig make make savedefconfig Then add the following to socfpga_defconfig: CONFIG_SIGNALFD=y CONFIG_REGULATOR=y CONFIG_REGULATOR_FIXED_VOLTAGE=y CONFIG_SRAM=y CONFIG_DEVTMPFS_MOUNT=y CONFIG_CONFIGFS_FS=y CONFIG_PMBUS=y CONFIG_SENSORS_PMBUS=y CONFIG_SENSORS_LTC2978=y CONFIG_SENSORS_LTC2978_REGULATOR=y CONFIG_PRINTK_TIME=y CONFIG_EXT4_FS=y Signed-off-by: Thor Thayer <tthayer@opensource.altera.com> Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by: Alan Tull <atull@opensource.altera.com> Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
2014-10-21 23:04:16 +00:00
CONFIG_NFS_FS=y
ARM: socfpga_defconfig: enable FS configs to support Angstrom filesystem systemd on the Angstrom root file system expects AUTOFS to be configured as a module and NFSD to be statically linked into the kernel. This patch adds the necessary configuration to get rid two "FAILED" error messages during systemd startup. Signed-off-by: Matthew Gerlach <mgerlach@opensource.altera.com> Signed-off-by: Dinh Nguyen <dinguyen@kernel.org> --- v2: provide a more descriptive changelog
2016-11-08 15:01:22 -06:00
CONFIG_NFS_V3_ACL=y
ARM: socfpga_defconfig: update defconfig for SoCFPGA MARVELL_PHY - support for the Marvell PHY that is on most of the devkits EEPROM_AT24 - support for I2C EEPROMs on the devkits GPIO_ALTERA - support for Altera's GPIO driver NAND - support for the Denali NAND controller along with MTD subsystem SPI_DESIGNWARE - support for SPI that is on SoCFPGA SPI_DW_MMIO - support for the memory-mapped io interface for the DW SPI core OF_CONFIGFS - SoCFPGA makes use of DT overlays using configfs, enable it GPIO_ALTERA_A10SR - support for the newly added Altera HWMON driver LEDS - support for the GPIO LEDs on the SoCFPGA devkits RTC - support for the DS1307 RTC JFFS2_FS - support for the JFFS2 filesystem NFS_V4 - supports for v4 NFS FUNCTION_TRACER - supports debug function tracing Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
2016-12-14 04:25:54 -06:00
CONFIG_NFS_V4=y
ARM: socfpga_defconfig: Update defconfig for SoCFPGA Clean up the socfpga_defconfig file by doing: make socfpga_defconfig make make savedefconfig Then add the following to socfpga_defconfig: CONFIG_SIGNALFD=y CONFIG_REGULATOR=y CONFIG_REGULATOR_FIXED_VOLTAGE=y CONFIG_SRAM=y CONFIG_DEVTMPFS_MOUNT=y CONFIG_CONFIGFS_FS=y CONFIG_PMBUS=y CONFIG_SENSORS_PMBUS=y CONFIG_SENSORS_LTC2978=y CONFIG_SENSORS_LTC2978_REGULATOR=y CONFIG_PRINTK_TIME=y CONFIG_EXT4_FS=y Signed-off-by: Thor Thayer <tthayer@opensource.altera.com> Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by: Alan Tull <atull@opensource.altera.com> Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
2014-10-21 23:04:16 +00:00
CONFIG_ROOT_NFS=y
ARM: socfpga_defconfig: enable FS configs to support Angstrom filesystem systemd on the Angstrom root file system expects AUTOFS to be configured as a module and NFSD to be statically linked into the kernel. This patch adds the necessary configuration to get rid two "FAILED" error messages during systemd startup. Signed-off-by: Matthew Gerlach <mgerlach@opensource.altera.com> Signed-off-by: Dinh Nguyen <dinguyen@kernel.org> --- v2: provide a more descriptive changelog
2016-11-08 15:01:22 -06:00
CONFIG_NFSD=y
CONFIG_NFSD_V3_ACL=y
CONFIG_NFSD_V4=y
ARM: socfpga: initial support for Altera's SOCFPGA platform Adding core definitions for Altera's SOCFPGA ARM platform. Mininum support for Altera's SOCFPGA Cyclone 5 hardware. Signed-off-by: Dinh Nguyen <dinguyen@altera.com> Reviewed-by: Pavel Machek <pavel@denx.de> Reviewed-by: Rob Herring <rob.herring@calxeda.com> Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-07-18 16:07:18 -06:00
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_ISO8859_1=y
ARM: socfpga_defconfig: Update defconfig for SoCFPGA Clean up the socfpga_defconfig file by doing: make socfpga_defconfig make make savedefconfig Then add the following to socfpga_defconfig: CONFIG_SIGNALFD=y CONFIG_REGULATOR=y CONFIG_REGULATOR_FIXED_VOLTAGE=y CONFIG_SRAM=y CONFIG_DEVTMPFS_MOUNT=y CONFIG_CONFIGFS_FS=y CONFIG_PMBUS=y CONFIG_SENSORS_PMBUS=y CONFIG_SENSORS_LTC2978=y CONFIG_SENSORS_LTC2978_REGULATOR=y CONFIG_PRINTK_TIME=y CONFIG_EXT4_FS=y Signed-off-by: Thor Thayer <tthayer@opensource.altera.com> Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by: Alan Tull <atull@opensource.altera.com> Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
2014-10-21 23:04:16 +00:00
CONFIG_PRINTK_TIME=y
ARM: defconfig: address renamed CONFIG_DEBUG_INFO=y CONFIG_DEBUG_INFO is now implicitly selected if one picks one of the explicit options that could be DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT, DEBUG_INFO_DWARF4, DEBUG_INFO_DWARF5. This was actually not what I had in mind when I suggested making it a 'choice' statement, but it's too late to change again now, and the Kconfig logic is more sensible in the new form. Change any defconfig file that had CONFIG_DEBUG_INFO enabled but did not pick DWARF4 or DWARF5 explicitly to now pick the toolchain default. Fixes: f9b3cd245784 ("Kconfig.debug: make DEBUG_INFO selectable from a choice") Acked-by: Sudeep Holla <sudeep.holla@arm.com> Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-07-20 15:55:28 +02:00
CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
ARM: socfpga: initial support for Altera's SOCFPGA platform Adding core definitions for Altera's SOCFPGA ARM platform. Mininum support for Altera's SOCFPGA Cyclone 5 hardware. Signed-off-by: Dinh Nguyen <dinguyen@altera.com> Reviewed-by: Pavel Machek <pavel@denx.de> Reviewed-by: Rob Herring <rob.herring@calxeda.com> Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-07-18 16:07:18 -06:00
CONFIG_MAGIC_SYSRQ=y
ARM: socfpga_defconfig: Add back DEBUG_FS Commit 0e4a459f56c3 ("tracing: Remove unnecessary DEBUG_FS dependency") removed select for DEBUG_FS but we still need it for development purposes. Fixes: 0e4a459f56c3 ("tracing: Remove unnecessary DEBUG_FS dependency") Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
2020-02-03 15:55:09 -06:00
CONFIG_DEBUG_FS=y
ARM: socfpga: initial support for Altera's SOCFPGA platform Adding core definitions for Altera's SOCFPGA ARM platform. Mininum support for Altera's SOCFPGA Cyclone 5 hardware. Signed-off-by: Dinh Nguyen <dinguyen@altera.com> Reviewed-by: Pavel Machek <pavel@denx.de> Reviewed-by: Rob Herring <rob.herring@calxeda.com> Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-07-18 16:07:18 -06:00
CONFIG_DETECT_HUNG_TASK=y
# CONFIG_SCHED_DEBUG is not set
ARM: socfpga_defconfig: update defconfig for SoCFPGA MARVELL_PHY - support for the Marvell PHY that is on most of the devkits EEPROM_AT24 - support for I2C EEPROMs on the devkits GPIO_ALTERA - support for Altera's GPIO driver NAND - support for the Denali NAND controller along with MTD subsystem SPI_DESIGNWARE - support for SPI that is on SoCFPGA SPI_DW_MMIO - support for the memory-mapped io interface for the DW SPI core OF_CONFIGFS - SoCFPGA makes use of DT overlays using configfs, enable it GPIO_ALTERA_A10SR - support for the newly added Altera HWMON driver LEDS - support for the GPIO LEDs on the SoCFPGA devkits RTC - support for the DS1307 RTC JFFS2_FS - support for the JFFS2 filesystem NFS_V4 - supports for v4 NFS FUNCTION_TRACER - supports debug function tracing Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
2016-12-14 04:25:54 -06:00
CONFIG_FUNCTION_TRACER=y
ARM: socfpga: initial support for Altera's SOCFPGA platform Adding core definitions for Altera's SOCFPGA ARM platform. Mininum support for Altera's SOCFPGA Cyclone 5 hardware. Signed-off-by: Dinh Nguyen <dinguyen@altera.com> Reviewed-by: Pavel Machek <pavel@denx.de> Reviewed-by: Rob Herring <rob.herring@calxeda.com> Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-07-18 16:07:18 -06:00
CONFIG_DEBUG_USER=y
Reference in New Issue Copy Permalink