linux-stable/net/batman-adv/main.c

737 lines
20 KiB
C
Raw Permalink Normal View History

// SPDX-License-Identifier: GPL-2.0
/* Copyright (C) B.A.T.M.A.N. contributors:
*
* Marek Lindner, Simon Wunderlich
*/
2015-04-17 17:40:28 +00:00
#include "main.h"
#include <linux/array_size.h>
2015-04-17 17:40:28 +00:00
#include <linux/atomic.h>
#include <linux/build_bug.h>
2015-04-17 17:40:28 +00:00
#include <linux/byteorder/generic.h>
#include <linux/container_of.h>
#include <linux/crc32c.h>
#include <linux/device.h>
2015-04-17 17:40:28 +00:00
#include <linux/errno.h>
#include <linux/gfp.h>
2015-04-17 17:40:28 +00:00
#include <linux/if_ether.h>
#include <linux/if_vlan.h>
2015-04-17 17:40:28 +00:00
#include <linux/init.h>
#include <linux/ip.h>
#include <linux/ipv6.h>
#include <linux/kobject.h>
#include <linux/kref.h>
2015-04-17 17:40:28 +00:00
#include <linux/list.h>
#include <linux/minmax.h>
2015-04-17 17:40:28 +00:00
#include <linux/module.h>
#include <linux/netdevice.h>
#include <linux/printk.h>
2015-04-17 17:40:28 +00:00
#include <linux/rculist.h>
#include <linux/rcupdate.h>
#include <linux/skbuff.h>
#include <linux/slab.h>
2015-04-17 17:40:28 +00:00
#include <linux/spinlock.h>
#include <linux/sprintf.h>
2015-04-17 17:40:28 +00:00
#include <linux/stddef.h>
#include <linux/string.h>
#include <linux/workqueue.h>
#include <net/dsfield.h>
#include <net/genetlink.h>
2015-04-17 17:40:28 +00:00
#include <net/rtnetlink.h>
#include <uapi/linux/batadv_packet.h>
#include <uapi/linux/batman_adv.h>
2015-04-17 17:40:28 +00:00
#include "bat_algo.h"
#include "bat_iv_ogm.h"
#include "bat_v.h"
2015-04-17 17:40:28 +00:00
#include "bridge_loop_avoidance.h"
#include "distributed-arp-table.h"
#include "gateway_client.h"
#include "gateway_common.h"
#include "hard-interface.h"
#include "log.h"
2015-04-17 17:40:28 +00:00
#include "multicast.h"
#include "netlink.h"
2015-04-17 17:40:28 +00:00
#include "network-coding.h"
#include "originator.h"
#include "routing.h"
#include "send.h"
#include "soft-interface.h"
#include "tp_meter.h"
#include "translation-table.h"
/* List manipulations on hardif_list have to be rtnl_lock()'ed,
* list traversals just rcu-locked
*/
struct list_head batadv_hardif_list;
unsigned int batadv_hardif_generation;
static int (*batadv_rx_handler[256])(struct sk_buff *skb,
struct batadv_hard_iface *recv_if);
unsigned char batadv_broadcast_addr[] = {0xff, 0xff, 0xff, 0xff, 0xff, 0xff};
struct workqueue_struct *batadv_event_workqueue;
static void batadv_recv_handler_init(void);
#define BATADV_UEV_TYPE_VAR "BATTYPE="
#define BATADV_UEV_ACTION_VAR "BATACTION="
#define BATADV_UEV_DATA_VAR "BATDATA="
static char *batadv_uev_action_str[] = {
"add",
"del",
"change",
"loopdetect",
};
static char *batadv_uev_type_str[] = {
"gw",
"bla",
};
static int __init batadv_init(void)
{
int ret;
ret = batadv_tt_cache_init();
if (ret < 0)
return ret;
INIT_LIST_HEAD(&batadv_hardif_list);
batadv_algo_init();
batadv_recv_handler_init();
batman-adv: ELP - adding basic infrastructure The B.A.T.M.A.N. protocol originally only used a single message type (called OGM) to determine the link qualities to the direct neighbors and spreading these link quality information through the whole mesh. This procedure is summarized on the BATMAN concept page and explained in details in the RFC draft published in 2008. This approach was chosen for its simplicity during the protocol design phase and the implementation. However, it also bears some drawbacks: * Wireless interfaces usually come with some packet loss, therefore a higher broadcast rate is desirable to allow a fast reaction on flaky connections. Other interfaces of the same host might be connected to Ethernet LANs / VPNs / etc which rarely exhibit packet loss would benefit from a lower broadcast rate to reduce overhead. * It generally is more desirable to detect local link quality changes at a faster rate than propagating all these changes through the entire mesh (the far end of the mesh does not need to care about local link quality changes that much). Other optimizations strategies, like reducing overhead, might be possible if OGMs weren't used for all tasks in the mesh at the same time. As a result detecting local link qualities shall be handled by an independent message type, ELP, whereas the OGM message type remains responsible for flooding the mesh with these link quality information and determining the overall path transmit qualities. Developed by Linus during a 6 months trainee study period in Ascom (Switzerland) AG. Signed-off-by: Linus Luessing <linus.luessing@web.de> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@open-mesh.com>
2016-01-16 08:40:09 +00:00
batadv_v_init();
batadv_iv_init();
batadv_nc_init();
batadv_tp_meter_init();
batadv_event_workqueue = create_singlethread_workqueue("bat_events");
if (!batadv_event_workqueue)
goto err_create_wq;
register_netdevice_notifier(&batadv_hard_if_notifier);
rtnl_link_register(&batadv_link_ops);
batadv_netlink_register();
pr_info("B.A.T.M.A.N. advanced %s (compatibility version %i) loaded\n",
BATADV_SOURCE_VERSION, BATADV_COMPAT_VERSION);
return 0;
err_create_wq:
batadv_tt_cache_destroy();
return -ENOMEM;
}
static void __exit batadv_exit(void)
{
batadv_netlink_unregister();
rtnl_link_unregister(&batadv_link_ops);
unregister_netdevice_notifier(&batadv_hard_if_notifier);
destroy_workqueue(batadv_event_workqueue);
batadv_event_workqueue = NULL;
rcu_barrier();
batadv_tt_cache_destroy();
}
/**
* batadv_mesh_init() - Initialize soft interface
* @soft_iface: netdev struct of the soft interface
*
* Return: 0 on success or negative error number in case of failure
*/
int batadv_mesh_init(struct net_device *soft_iface)
{
struct batadv_priv *bat_priv = netdev_priv(soft_iface);
int ret;
spin_lock_init(&bat_priv->forw_bat_list_lock);
spin_lock_init(&bat_priv->forw_bcast_list_lock);
spin_lock_init(&bat_priv->tt.changes_list_lock);
spin_lock_init(&bat_priv->tt.req_list_lock);
spin_lock_init(&bat_priv->tt.roam_list_lock);
spin_lock_init(&bat_priv->tt.last_changeset_lock);
spin_lock_init(&bat_priv->tt.commit_lock);
spin_lock_init(&bat_priv->gw.list_lock);
#ifdef CONFIG_BATMAN_ADV_MCAST
spin_lock_init(&bat_priv->mcast.mla_lock);
spin_lock_init(&bat_priv->mcast.want_lists_lock);
#endif
spin_lock_init(&bat_priv->tvlv.container_list_lock);
spin_lock_init(&bat_priv->tvlv.handler_list_lock);
spin_lock_init(&bat_priv->softif_vlan_list_lock);
spin_lock_init(&bat_priv->tp_list_lock);
INIT_HLIST_HEAD(&bat_priv->forw_bat_list);
INIT_HLIST_HEAD(&bat_priv->forw_bcast_list);
INIT_HLIST_HEAD(&bat_priv->gw.gateway_list);
#ifdef CONFIG_BATMAN_ADV_MCAST
INIT_HLIST_HEAD(&bat_priv->mcast.want_all_unsnoopables_list);
batman-adv: Send multicast packets to nodes with a WANT_ALL flag With this patch a node sends IPv4 multicast packets to nodes which have a BATADV_MCAST_WANT_ALL_IPV4 flag set and IPv6 multicast packets to nodes which have a BATADV_MCAST_WANT_ALL_IPV6 flag set, too. Why is this needed? There are scenarios involving bridges where multicast report snooping and multicast TT announcements are not sufficient, which would lead to packet loss for some nodes otherwise: MLDv1 and IGMPv1/IGMPv2 have a suppression mechanism for multicast listener reports. When we have an MLDv1/IGMPv1/IGMPv2 querier behind a bridge then our snooping bridge is potentially not going to see any reports even though listeners exist because according to RFC4541 such reports are only forwarded to multicast routers: ----------------------------------------------------------- --------------- {Querier}---|Snoop. Switch|----{Listener} --------------- \ ^ ------- | br0 | < ??? ------- \ _-~---~_ _-~/ ~-_ ~ batman-adv \-----{Sender} \~_ cloud ~/ -~~__-__-~_/ I) MLDv1 Query: {Querier} -> flooded II) MLDv1 Report: {Listener} -> {Querier} -> br0 cannot detect the {Listener} => Packets from {Sender} need to be forwarded to all detected listeners and MLDv1/IGMPv1/IGMPv2 queriers. ----------------------------------------------------------- Note that we do not need to explicitly forward to MLDv2/IGMPv3 queriers, because these protocols have no report suppression: A bridge has no trouble detecting MLDv2/IGMPv3 listeners. Even though we do not support bridges yet we need to provide the according infrastructure already to not break compatibility later. Signed-off-by: Linus Lüssing <linus.luessing@web.de> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2014-02-15 16:47:54 +00:00
INIT_HLIST_HEAD(&bat_priv->mcast.want_all_ipv4_list);
INIT_HLIST_HEAD(&bat_priv->mcast.want_all_ipv6_list);
#endif
INIT_LIST_HEAD(&bat_priv->tt.changes_list);
INIT_HLIST_HEAD(&bat_priv->tt.req_list);
INIT_LIST_HEAD(&bat_priv->tt.roam_list);
#ifdef CONFIG_BATMAN_ADV_MCAST
INIT_HLIST_HEAD(&bat_priv->mcast.mla_list);
#endif
INIT_HLIST_HEAD(&bat_priv->tvlv.container_list);
INIT_HLIST_HEAD(&bat_priv->tvlv.handler_list);
INIT_HLIST_HEAD(&bat_priv->softif_vlan_list);
INIT_HLIST_HEAD(&bat_priv->tp_list);
bat_priv->gw.generation = 0;
ret = batadv_originator_init(bat_priv);
if (ret < 0) {
atomic_set(&bat_priv->mesh_state, BATADV_MESH_DEACTIVATING);
goto err_orig;
}
ret = batadv_tt_init(bat_priv);
if (ret < 0) {
atomic_set(&bat_priv->mesh_state, BATADV_MESH_DEACTIVATING);
goto err_tt;
}
ret = batadv_v_mesh_init(bat_priv);
if (ret < 0) {
atomic_set(&bat_priv->mesh_state, BATADV_MESH_DEACTIVATING);
goto err_v;
}
ret = batadv_bla_init(bat_priv);
if (ret < 0) {
atomic_set(&bat_priv->mesh_state, BATADV_MESH_DEACTIVATING);
goto err_bla;
}
ret = batadv_dat_init(bat_priv);
if (ret < 0) {
atomic_set(&bat_priv->mesh_state, BATADV_MESH_DEACTIVATING);
goto err_dat;
}
ret = batadv_nc_mesh_init(bat_priv);
if (ret < 0) {
atomic_set(&bat_priv->mesh_state, BATADV_MESH_DEACTIVATING);
goto err_nc;
}
batman-adv: network coding - add the initial infrastructure code Network coding exploits the 802.11 shared medium to allow multiple packets to be sent in a single transmission. In brief, a relay can XOR two packets, and send the coded packet to two destinations. The receivers can decode one of the original packets by XOR'ing the coded packet with the other original packet. This will lead to increased throughput in topologies where two packets cross one relay. In a simple topology with three nodes, it takes four transmissions without network coding to get one packet from Node A to Node B and one from Node B to Node A: 1. Node A ---- p1 ---> Node R Node B 2. Node A Node R <--- p2 ---- Node B 3. Node A <--- p2 ---- Node R Node B 4. Node A Node R ---- p1 ---> Node B With network coding, the relay only needs one transmission, which saves us one slot of valuable airtime: 1. Node A ---- p1 ---> Node R Node B 2. Node A Node R <--- p2 ---- Node B 3. Node A <- p1 x p2 - Node R - p1 x p2 -> Node B The same principle holds for a topology including five nodes. Here the packets from Node A and Node B are overheard by Node C and Node D, respectively. This allows Node R to send a network coded packet to save one transmission: Node A Node B | \ / | | p1 p2 | | \ / | p1 > Node R < p2 | | | / \ | | p1 x p2 p1 x p2 | v / \ v / \ Node C < > Node D More information is available on the open-mesh.org wiki[1]. This patch adds the initial code to support network coding in batman-adv. It sets up a worker thread to do house keeping and adds a sysfs file to enable/disable network coding. The feature is disabled by default, as it requires a wifi-driver with working promiscuous mode, and also because it adds a small delay at each hop. [1] http://www.open-mesh.org/projects/batman-adv/wiki/Catwoman Signed-off-by: Martin Hundebøll <martin@hundeboll.net> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2013-01-25 10:12:38 +00:00
batadv_gw_init(bat_priv);
batadv_mcast_init(bat_priv);
atomic_set(&bat_priv->gw.reselect, 0);
atomic_set(&bat_priv->mesh_state, BATADV_MESH_ACTIVE);
return 0;
err_nc:
batadv_dat_free(bat_priv);
err_dat:
batadv_bla_free(bat_priv);
err_bla:
batadv_v_mesh_free(bat_priv);
err_v:
batadv_tt_free(bat_priv);
err_tt:
batadv_originator_free(bat_priv);
err_orig:
batadv_purge_outstanding_packets(bat_priv, NULL);
atomic_set(&bat_priv->mesh_state, BATADV_MESH_INACTIVE);
return ret;
}
/**
* batadv_mesh_free() - Deinitialize soft interface
* @soft_iface: netdev struct of the soft interface
*/
void batadv_mesh_free(struct net_device *soft_iface)
{
struct batadv_priv *bat_priv = netdev_priv(soft_iface);
atomic_set(&bat_priv->mesh_state, BATADV_MESH_DEACTIVATING);
batadv_purge_outstanding_packets(bat_priv, NULL);
batadv_gw_node_free(bat_priv);
batadv_v_mesh_free(bat_priv);
batadv_nc_mesh_free(bat_priv);
batadv_dat_free(bat_priv);
batadv_bla_free(bat_priv);
batadv_mcast_free(bat_priv);
/* Free the TT and the originator tables only after having terminated
* all the other depending components which may use these structures for
* their purposes.
*/
batadv_tt_free(bat_priv);
/* Since the originator table clean up routine is accessing the TT
* tables as well, it has to be invoked after the TT tables have been
* freed and marked as empty. This ensures that no cleanup RCU callbacks
* accessing the TT data are scheduled for later execution.
*/
batadv_originator_free(bat_priv);
batadv_gw_free(bat_priv);
free_percpu(bat_priv->bat_counters);
bat_priv->bat_counters = NULL;
atomic_set(&bat_priv->mesh_state, BATADV_MESH_INACTIVE);
}
/**
* batadv_is_my_mac() - check if the given mac address belongs to any of the
* real interfaces in the current mesh
* @bat_priv: the bat priv with all the soft interface information
* @addr: the address to check
*
* Return: 'true' if the mac address was found, false otherwise.
*/
bool batadv_is_my_mac(struct batadv_priv *bat_priv, const u8 *addr)
{
const struct batadv_hard_iface *hard_iface;
bool is_my_mac = false;
rcu_read_lock();
list_for_each_entry_rcu(hard_iface, &batadv_hardif_list, list) {
if (hard_iface->if_status != BATADV_IF_ACTIVE)
continue;
if (hard_iface->soft_iface != bat_priv->soft_iface)
continue;
if (batadv_compare_eth(hard_iface->net_dev->dev_addr, addr)) {
is_my_mac = true;
break;
}
}
rcu_read_unlock();
return is_my_mac;
}
/**
* batadv_max_header_len() - calculate maximum encapsulation overhead for a
* payload packet
*
* Return: the maximum encapsulation overhead in bytes.
*/
int batadv_max_header_len(void)
{
int header_len = 0;
header_len = max_t(int, header_len,
sizeof(struct batadv_unicast_packet));
header_len = max_t(int, header_len,
sizeof(struct batadv_unicast_4addr_packet));
header_len = max_t(int, header_len,
sizeof(struct batadv_bcast_packet));
#ifdef CONFIG_BATMAN_ADV_NC
header_len = max_t(int, header_len,
sizeof(struct batadv_coded_packet));
#endif
return header_len + ETH_HLEN;
}
/**
* batadv_skb_set_priority() - sets skb priority according to packet content
* @skb: the packet to be sent
* @offset: offset to the packet content
*
* This function sets a value between 256 and 263 (802.1d priority), which
* can be interpreted by the cfg80211 or other drivers.
*/
void batadv_skb_set_priority(struct sk_buff *skb, int offset)
{
struct iphdr ip_hdr_tmp, *ip_hdr;
struct ipv6hdr ip6_hdr_tmp, *ip6_hdr;
struct ethhdr ethhdr_tmp, *ethhdr;
struct vlan_ethhdr *vhdr, vhdr_tmp;
u32 prio;
/* already set, do nothing */
if (skb->priority >= 256 && skb->priority <= 263)
return;
ethhdr = skb_header_pointer(skb, offset, sizeof(*ethhdr), &ethhdr_tmp);
if (!ethhdr)
return;
switch (ethhdr->h_proto) {
case htons(ETH_P_8021Q):
vhdr = skb_header_pointer(skb, offset + sizeof(*vhdr),
sizeof(*vhdr), &vhdr_tmp);
if (!vhdr)
return;
prio = ntohs(vhdr->h_vlan_TCI) & VLAN_PRIO_MASK;
prio = prio >> VLAN_PRIO_SHIFT;
break;
case htons(ETH_P_IP):
ip_hdr = skb_header_pointer(skb, offset + sizeof(*ethhdr),
sizeof(*ip_hdr), &ip_hdr_tmp);
if (!ip_hdr)
return;
prio = (ipv4_get_dsfield(ip_hdr) & 0xfc) >> 5;
break;
case htons(ETH_P_IPV6):
ip6_hdr = skb_header_pointer(skb, offset + sizeof(*ethhdr),
sizeof(*ip6_hdr), &ip6_hdr_tmp);
if (!ip6_hdr)
return;
prio = (ipv6_get_dsfield(ip6_hdr) & 0xfc) >> 5;
break;
default:
return;
}
skb->priority = prio + 256;
}
static int batadv_recv_unhandled_packet(struct sk_buff *skb,
struct batadv_hard_iface *recv_if)
{
kfree_skb(skb);
return NET_RX_DROP;
}
/* incoming packets with the batman ethertype received on any active hard
* interface
*/
/**
* batadv_batman_skb_recv() - Handle incoming message from an hard interface
* @skb: the received packet
* @dev: the net device that the packet was received on
* @ptype: packet type of incoming packet (ETH_P_BATMAN)
* @orig_dev: the original receive net device (e.g. bonded device)
*
* Return: NET_RX_SUCCESS on success or NET_RX_DROP in case of failure
*/
int batadv_batman_skb_recv(struct sk_buff *skb, struct net_device *dev,
struct packet_type *ptype,
struct net_device *orig_dev)
{
struct batadv_priv *bat_priv;
struct batadv_ogm_packet *batadv_ogm_packet;
struct batadv_hard_iface *hard_iface;
u8 idx;
hard_iface = container_of(ptype, struct batadv_hard_iface,
batman_adv_ptype);
/* Prevent processing a packet received on an interface which is getting
* shut down otherwise the packet may trigger de-reference errors
* further down in the receive path.
*/
if (!kref_get_unless_zero(&hard_iface->refcount))
goto err_out;
skb = skb_share_check(skb, GFP_ATOMIC);
/* skb was released by skb_share_check() */
if (!skb)
goto err_put;
/* packet should hold at least type and version */
if (unlikely(!pskb_may_pull(skb, 2)))
goto err_free;
/* expect a valid ethernet header here. */
if (unlikely(skb->mac_len != ETH_HLEN || !skb_mac_header(skb)))
goto err_free;
if (!hard_iface->soft_iface)
goto err_free;
bat_priv = netdev_priv(hard_iface->soft_iface);
if (atomic_read(&bat_priv->mesh_state) != BATADV_MESH_ACTIVE)
goto err_free;
/* discard frames on not active interfaces */
if (hard_iface->if_status != BATADV_IF_ACTIVE)
goto err_free;
batadv_ogm_packet = (struct batadv_ogm_packet *)skb->data;
if (batadv_ogm_packet->version != BATADV_COMPAT_VERSION) {
batadv_dbg(BATADV_DBG_BATMAN, bat_priv,
"Drop packet: incompatible batman version (%i)\n",
batadv_ogm_packet->version);
goto err_free;
}
/* reset control block to avoid left overs from previous users */
memset(skb->cb, 0, sizeof(struct batadv_skb_cb));
idx = batadv_ogm_packet->packet_type;
(*batadv_rx_handler[idx])(skb, hard_iface);
batadv_hardif_put(hard_iface);
/* return NET_RX_SUCCESS in any case as we
* most probably dropped the packet for
* routing-logical reasons.
*/
return NET_RX_SUCCESS;
err_free:
kfree_skb(skb);
err_put:
batadv_hardif_put(hard_iface);
err_out:
return NET_RX_DROP;
}
static void batadv_recv_handler_init(void)
{
int i;
for (i = 0; i < ARRAY_SIZE(batadv_rx_handler); i++)
batadv_rx_handler[i] = batadv_recv_unhandled_packet;
for (i = BATADV_UNICAST_MIN; i <= BATADV_UNICAST_MAX; i++)
batadv_rx_handler[i] = batadv_recv_unhandled_unicast_packet;
/* compile time checks for sizes */
BUILD_BUG_ON(sizeof(struct batadv_bla_claim_dst) != 6);
BUILD_BUG_ON(sizeof(struct batadv_ogm_packet) != 24);
BUILD_BUG_ON(sizeof(struct batadv_icmp_header) != 20);
BUILD_BUG_ON(sizeof(struct batadv_icmp_packet) != 20);
BUILD_BUG_ON(sizeof(struct batadv_icmp_packet_rr) != 116);
BUILD_BUG_ON(sizeof(struct batadv_unicast_packet) != 10);
BUILD_BUG_ON(sizeof(struct batadv_unicast_4addr_packet) != 18);
BUILD_BUG_ON(sizeof(struct batadv_frag_packet) != 20);
BUILD_BUG_ON(sizeof(struct batadv_bcast_packet) != 14);
BUILD_BUG_ON(sizeof(struct batadv_coded_packet) != 46);
BUILD_BUG_ON(sizeof(struct batadv_unicast_tvlv_packet) != 20);
BUILD_BUG_ON(sizeof(struct batadv_tvlv_hdr) != 4);
BUILD_BUG_ON(sizeof(struct batadv_tvlv_gateway_data) != 8);
BUILD_BUG_ON(sizeof(struct batadv_tvlv_tt_vlan_data) != 8);
BUILD_BUG_ON(sizeof(struct batadv_tvlv_tt_change) != 12);
BUILD_BUG_ON(sizeof(struct batadv_tvlv_roam_adv) != 8);
i = sizeof_field(struct sk_buff, cb);
BUILD_BUG_ON(sizeof(struct batadv_skb_cb) > i);
/* broadcast packet */
batadv_rx_handler[BATADV_BCAST] = batadv_recv_bcast_packet;
/* multicast packet */
batadv_rx_handler[BATADV_MCAST] = batadv_recv_mcast_packet;
/* unicast packets ... */
/* unicast with 4 addresses packet */
batadv_rx_handler[BATADV_UNICAST_4ADDR] = batadv_recv_unicast_packet;
/* unicast packet */
batadv_rx_handler[BATADV_UNICAST] = batadv_recv_unicast_packet;
/* unicast tvlv packet */
batadv_rx_handler[BATADV_UNICAST_TVLV] = batadv_recv_unicast_tvlv;
/* batman icmp packet */
batadv_rx_handler[BATADV_ICMP] = batadv_recv_icmp_packet;
/* Fragmented packets */
batadv_rx_handler[BATADV_UNICAST_FRAG] = batadv_recv_frag_packet;
}
/**
* batadv_recv_handler_register() - Register handler for batman-adv packet type
* @packet_type: batadv_packettype which should be handled
* @recv_handler: receive handler for the packet type
*
* Return: 0 on success or negative error number in case of failure
*/
int
batadv_recv_handler_register(u8 packet_type,
int (*recv_handler)(struct sk_buff *,
struct batadv_hard_iface *))
{
int (*curr)(struct sk_buff *skb,
struct batadv_hard_iface *recv_if);
curr = batadv_rx_handler[packet_type];
if (curr != batadv_recv_unhandled_packet &&
curr != batadv_recv_unhandled_unicast_packet)
return -EBUSY;
batadv_rx_handler[packet_type] = recv_handler;
return 0;
}
/**
* batadv_recv_handler_unregister() - Unregister handler for packet type
* @packet_type: batadv_packettype which should no longer be handled
*/
void batadv_recv_handler_unregister(u8 packet_type)
{
batadv_rx_handler[packet_type] = batadv_recv_unhandled_packet;
}
/**
* batadv_skb_crc32() - calculate CRC32 of the whole packet and skip bytes in
* the header
* @skb: skb pointing to fragmented socket buffers
* @payload_ptr: Pointer to position inside the head buffer of the skb
* marking the start of the data to be CRC'ed
*
* payload_ptr must always point to an address in the skb head buffer and not to
* a fragment.
*
* Return: big endian crc32c of the checksummed data
*/
__be32 batadv_skb_crc32(struct sk_buff *skb, u8 *payload_ptr)
{
u32 crc = 0;
unsigned int from;
unsigned int to = skb->len;
struct skb_seq_state st;
const u8 *data;
unsigned int len;
unsigned int consumed = 0;
from = (unsigned int)(payload_ptr - skb->data);
skb_prepare_seq_read(skb, from, to, &st);
while ((len = skb_seq_read(consumed, &data, &st)) != 0) {
crc = crc32c(crc, data, len);
consumed += len;
}
return htonl(crc);
}
/**
* batadv_get_vid() - extract the VLAN identifier from skb if any
* @skb: the buffer containing the packet
* @header_len: length of the batman header preceding the ethernet header
*
* Return: VID with the BATADV_VLAN_HAS_TAG flag when the packet embedded in the
* skb is vlan tagged. Otherwise BATADV_NO_FLAGS.
*/
unsigned short batadv_get_vid(struct sk_buff *skb, size_t header_len)
{
struct ethhdr *ethhdr = (struct ethhdr *)(skb->data + header_len);
struct vlan_ethhdr *vhdr;
unsigned short vid;
if (ethhdr->h_proto != htons(ETH_P_8021Q))
return BATADV_NO_FLAGS;
if (!pskb_may_pull(skb, header_len + VLAN_ETH_HLEN))
return BATADV_NO_FLAGS;
vhdr = (struct vlan_ethhdr *)(skb->data + header_len);
vid = ntohs(vhdr->h_vlan_TCI) & VLAN_VID_MASK;
vid |= BATADV_VLAN_HAS_TAG;
return vid;
}
/**
* batadv_vlan_ap_isola_get() - return AP isolation status for the given vlan
* @bat_priv: the bat priv with all the soft interface information
* @vid: the VLAN identifier for which the AP isolation attributed as to be
* looked up
*
* Return: true if AP isolation is on for the VLAN identified by vid, false
* otherwise
*/
bool batadv_vlan_ap_isola_get(struct batadv_priv *bat_priv, unsigned short vid)
{
bool ap_isolation_enabled = false;
struct batadv_softif_vlan *vlan;
/* if the AP isolation is requested on a VLAN, then check for its
* setting in the proper VLAN private data structure
*/
vlan = batadv_softif_vlan_get(bat_priv, vid);
if (vlan) {
ap_isolation_enabled = atomic_read(&vlan->ap_isolation);
batadv_softif_vlan_put(vlan);
}
return ap_isolation_enabled;
}
/**
* batadv_throw_uevent() - Send an uevent with batman-adv specific env data
* @bat_priv: the bat priv with all the soft interface information
* @type: subsystem type of event. Stored in uevent's BATTYPE
* @action: action type of event. Stored in uevent's BATACTION
* @data: string with additional information to the event (ignored for
* BATADV_UEV_DEL). Stored in uevent's BATDATA
*
* Return: 0 on success or negative error number in case of failure
*/
int batadv_throw_uevent(struct batadv_priv *bat_priv, enum batadv_uev_type type,
enum batadv_uev_action action, const char *data)
{
int ret = -ENOMEM;
struct kobject *bat_kobj;
char *uevent_env[4] = { NULL, NULL, NULL, NULL };
bat_kobj = &bat_priv->soft_iface->dev.kobj;
uevent_env[0] = kasprintf(GFP_ATOMIC,
"%s%s", BATADV_UEV_TYPE_VAR,
batadv_uev_type_str[type]);
if (!uevent_env[0])
goto report_error;
uevent_env[1] = kasprintf(GFP_ATOMIC,
"%s%s", BATADV_UEV_ACTION_VAR,
batadv_uev_action_str[action]);
if (!uevent_env[1])
goto free_first_env;
/* If the event is DEL, ignore the data field */
if (action != BATADV_UEV_DEL) {
uevent_env[2] = kasprintf(GFP_ATOMIC,
"%s%s", BATADV_UEV_DATA_VAR, data);
if (!uevent_env[2])
goto free_second_env;
}
ret = kobject_uevent_env(bat_kobj, KOBJ_CHANGE, uevent_env);
kfree(uevent_env[2]);
free_second_env:
kfree(uevent_env[1]);
free_first_env:
kfree(uevent_env[0]);
if (ret)
report_error:
batadv_dbg(BATADV_DBG_BATMAN, bat_priv,
"Impossible to send uevent for (%s,%s,%s) event (err: %d)\n",
batadv_uev_type_str[type],
batadv_uev_action_str[action],
(action == BATADV_UEV_DEL ? "NULL" : data), ret);
return ret;
}
module_init(batadv_init);
module_exit(batadv_exit);
MODULE_LICENSE("GPL");
MODULE_AUTHOR(BATADV_DRIVER_AUTHOR);
MODULE_DESCRIPTION(BATADV_DRIVER_DESC);
MODULE_VERSION(BATADV_SOURCE_VERSION);
MODULE_ALIAS_RTNL_LINK("batadv");
MODULE_ALIAS_GENL_FAMILY(BATADV_NL_NAME);